2008-07-25 01:37:44 +00:00
|
|
|
cmake_minimum_required( VERSION 2.4 )
|
2008-07-31 17:13:21 +00:00
|
|
|
|
|
|
|
if( COMMAND cmake_policy )
|
|
|
|
cmake_policy( SET CMP0003 NEW )
|
|
|
|
endif( COMMAND cmake_policy )
|
|
|
|
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
include( CheckFunctionExists )
|
2008-07-25 01:37:44 +00:00
|
|
|
include( FindPkgConfig )
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
|
|
|
|
option( NO_ASM "Disable assembly code" )
|
|
|
|
if( CMAKE_COMPILER_IS_GNUCXX )
|
|
|
|
option( NO_STRIP "Do not strip Release or MinSizeRel builds" )
|
|
|
|
endif( CMAKE_COMPILER_IS_GNUCXX )
|
|
|
|
|
|
|
|
if( CMAKE_SIZEOF_VOID_P MATCHES "8" )
|
|
|
|
set( X64 64 )
|
|
|
|
endif( CMAKE_SIZEOF_VOID_P MATCHES "8" )
|
|
|
|
|
|
|
|
if( WIN32 )
|
|
|
|
if( X64 )
|
|
|
|
set( WIN_TYPE Win64 )
|
|
|
|
set( XBITS x64 )
|
|
|
|
else( X64 )
|
|
|
|
set( WIN_TYPE Win32 )
|
|
|
|
set( XBITS x86 )
|
|
|
|
endif( X64 )
|
|
|
|
|
|
|
|
add_definitions( -D_WIN32 )
|
|
|
|
|
|
|
|
set( FMOD_SEARCH_PATHS
|
|
|
|
"C:/Program Files/FMOD SoundSystem/FMOD Programmers API ${WIN_TYPE}/api"
|
|
|
|
"C:/Program Files (x86)/FMOD SoundSystem/FMOD Programmers API ${WIN_TYPE}/api"
|
|
|
|
"E:/Program Files (x86)/FMOD SoundSystem/FMOD Programmers API ${WIN_TYPE}/api" )
|
|
|
|
set( FMOD_INC_PATH_SUFFIXES PATH_SUFFIXES inc )
|
|
|
|
set( FMOD_LIB_PATH_SUFFIXES PATH_SUFFIXES lib )
|
|
|
|
set( NASM_NAMES nasmw nasm )
|
|
|
|
|
|
|
|
find_path( D3D_INCLUDE_DIR d3d9.h
|
|
|
|
PATHS ENV DXSDK_DIR
|
|
|
|
PATH_SUFFIXES Include )
|
|
|
|
if( NOT D3D_INCLUDE_DIR )
|
|
|
|
message( SEND_ERROR "Could not find DirectX 9 header files" )
|
|
|
|
else( NOT D3D_INCLUDE_DIR )
|
|
|
|
include_directories( ${D3D_INCLUDE_DIR} )
|
|
|
|
endif( NOT D3D_INCLUDE_DIR )
|
|
|
|
|
|
|
|
find_library( DX_ddraw_LIBRARY ddraw
|
|
|
|
PATHS ENV DXSDK_DIR
|
|
|
|
PATH_SUFFIXES Lib Lib/${XBITS} )
|
|
|
|
find_library( DX_dxguid_LIBRARY dxguid
|
|
|
|
PATHS ENV DXSDK_DIR
|
|
|
|
PATH_SUFFIXES Lib Lib/${XBITS} )
|
|
|
|
find_library( DX_dinput8_LIBRARY dinput8
|
|
|
|
PATHS ENV DXSDK_DIR
|
|
|
|
PATH_SUFFIXES Lib Lib/${XBITS} )
|
|
|
|
|
|
|
|
set( DX_LIBS_FOUND YES )
|
|
|
|
if( NOT DX_ddraw_LIBRARY )
|
|
|
|
set( DX_LIBS_FOUND NO )
|
|
|
|
endif( NOT DX_ddraw_LIBRARY )
|
|
|
|
if( NOT DX_dxguid_LIBRARY )
|
|
|
|
set( DX_LIBS_FOUND NO )
|
|
|
|
endif( NOT DX_dxguid_LIBRARY )
|
|
|
|
if( NOT DX_dinput8_LIBRARY )
|
|
|
|
set( DX_LIBS_FOUND NO )
|
|
|
|
endif( NOT DX_dinput8_LIBRARY )
|
|
|
|
|
|
|
|
if( NOT DX_LIBS_FOUND )
|
|
|
|
message( FATAL_ERROR "Could not find DirectX 9 libraries" )
|
|
|
|
endif( NOT DX_LIBS_FOUND )
|
|
|
|
|
|
|
|
set( ZDOOM_LIBS
|
|
|
|
wsock32
|
|
|
|
winmm
|
|
|
|
"${DX_ddraw_LIBRARY}"
|
|
|
|
"${DX_dxguid_LIBRARY}"
|
|
|
|
"${DX_dinput8_LIBRARY}"
|
|
|
|
ole32
|
|
|
|
user32
|
|
|
|
gdi32
|
|
|
|
comctl32
|
|
|
|
comdlg32
|
|
|
|
ws2_32
|
|
|
|
setupapi )
|
|
|
|
else( WIN32 )
|
|
|
|
option( NO_GTK "Disable GTK+ dialogs (Not applicable to Windows)" )
|
|
|
|
option( VALGRIND "Add special Valgrind sequences to self-modifying code" )
|
|
|
|
|
|
|
|
set( FMOD_SEARCH_PATHS
|
|
|
|
/usr/local/include
|
|
|
|
/usr/include
|
|
|
|
/opt/local/include
|
|
|
|
/opt/include )
|
2008-07-25 01:37:44 +00:00
|
|
|
set( FMOD_INC_PATH_SUFFIXES PATH_SUFFIXES fmodex )
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
set( NASM_NAMES nasm )
|
|
|
|
|
|
|
|
# Non-Windows version also needs SDL
|
|
|
|
find_package( SDL )
|
|
|
|
if( NOT SDL_FOUND )
|
|
|
|
message( SEND_ERROR "SDL is required for building." )
|
|
|
|
endif( NOT SDL_FOUND )
|
|
|
|
set( ZDOOM_LIBS "${SDL_LIBRARY}" )
|
|
|
|
include_directories( "${SDL_INCLUDE_DIR}" )
|
|
|
|
|
|
|
|
# Use GTK+ for the IWAD picker, if available.
|
|
|
|
if( NOT NO_GTK )
|
2008-07-25 01:37:44 +00:00
|
|
|
pkg_check_modules( GTK2 gtk+-2.0 )
|
|
|
|
if( GTK2_FOUND )
|
|
|
|
set( ZDOOM_LIBS ${ZDOOM_LIBS} ${GTK2_LIBRARIES} )
|
|
|
|
include_directories( ${GTK2_INCLUDE_DIRS} )
|
|
|
|
else( GTK2_FOUND )
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
set( NO_GTK ON )
|
2008-07-25 01:37:44 +00:00
|
|
|
endif( GTK2_FOUND )
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
endif( NOT NO_GTK )
|
|
|
|
|
|
|
|
if( NO_GTK )
|
|
|
|
add_definitions( -DNO_GTK=1 )
|
|
|
|
endif( NO_GTK )
|
2008-08-06 18:26:25 +00:00
|
|
|
|
|
|
|
find_path( FPU_CONTROL_DIR fpu_control.h )
|
|
|
|
if( FPU_CONTROL_DIR )
|
|
|
|
include_directories( ${FPU_CONTROL_DIR} )
|
|
|
|
add_definitions( -DHAVE_FPU_CONTROL )
|
|
|
|
endif( FPU_CONTROL_DIR )
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
endif( WIN32 )
|
|
|
|
|
|
|
|
# Decide on the name of the FMOD library we want to use.
|
|
|
|
|
|
|
|
if( NOT FMOD_LIB_NAME AND MSVC )
|
|
|
|
set( FMOD_LIB_NAME fmodex${X64}_vc )
|
|
|
|
endif( NOT FMOD_LIB_NAME AND MSVC )
|
|
|
|
|
|
|
|
if( NOT FMOD_LIB_NAME AND BORLAND )
|
|
|
|
set( FMOD_LIB_NAME fmodex${X64}_bc )
|
|
|
|
endif( NOT FMOD_LIB_NAME AND BORLAND )
|
|
|
|
|
|
|
|
if( NOT FMOD_LIB_NAME )
|
|
|
|
set( FMOD_LIB_NAME fmodex${X64} )
|
|
|
|
endif( NOT FMOD_LIB_NAME )
|
|
|
|
|
|
|
|
|
|
|
|
# Search for FMOD include files
|
|
|
|
|
2008-10-14 01:28:04 +00:00
|
|
|
find_path( FMOD_INCLUDE_DIR fmod.hpp
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
PATHS ${FMOD_SEARCH_PATHS}
|
|
|
|
${FMOD_INC_PATH_SUFFIXES} )
|
|
|
|
|
|
|
|
if( FMOD_INCLUDE_DIR )
|
|
|
|
message( STATUS "FMOD include files found at ${FMOD_INCLUDE_DIR}" )
|
|
|
|
else( FMOD_INCLUDE_DIR )
|
|
|
|
message( SEND_ERROR "Could not find FMOD include files" )
|
|
|
|
endif( FMOD_INCLUDE_DIR )
|
|
|
|
|
|
|
|
|
|
|
|
# Search for FMOD library
|
|
|
|
|
|
|
|
find_library( FMOD_LIBRARY ${FMOD_LIB_NAME}
|
|
|
|
PATHS ${FMOD_SEARCH_PATHS}
|
|
|
|
${FMOD_LIB_PATH_SUFFIXES} )
|
|
|
|
|
|
|
|
if( FMOD_LIBRARY )
|
|
|
|
message( STATUS "FMOD library found at ${FMOD_LIBRARY}" )
|
|
|
|
else( FMOD_LIBRARY )
|
|
|
|
message( SEND_ERROR "Could not find FMOD library" )
|
|
|
|
endif( FMOD_LIBRARY )
|
|
|
|
|
|
|
|
|
|
|
|
# Search for NASM
|
|
|
|
|
|
|
|
if( NOT NO_ASM )
|
2008-08-12 02:49:00 +00:00
|
|
|
if( UNIX AND X64 )
|
|
|
|
find_program( GAS_PATH as )
|
|
|
|
|
|
|
|
if( GAS_PATH )
|
|
|
|
set( ASSEMBLER ${GAS_PATH} )
|
|
|
|
else( GAS_PATH )
|
|
|
|
message( STATUS "Could not find as. Disabling assembly code." )
|
- Ported vlinetallasm4 to AMD64 assembly. Even with the increased number of
registers AMD64 provides, this routine still needs to be written as self-
modifying code for maximum performance. The additional registers do allow
for further optimization over the x86 version by allowing all four pixels
to be in flight at the same time. The end result is that AMD64 ASM is about
2.18 times faster than AMD64 C and about 1.06 times faster than x86 ASM.
(For further comparison, AMD64 C and x86 C are practically the same for
this function.) Should I port any more assembly to AMD64, mvlineasm4 is the
most likely candidate, but it's not used enough at this point to bother.
Also, this may or may not work with Linux at the moment, since it doesn't
have the eh_handler metadata. Win64 is easier, since I just need to
structure the function prologue and epilogue properly and use some
assembler directives/macros to automatically generate the metadata. And
that brings up another point: You need YASM to assemble the AMD64 code,
because NASM doesn't support the Win64 metadata directives.
- Added an SSE version of DoBlending. This is strictly C intrinsics.
VC++ still throws around unneccessary register moves. GCC seems to be
pretty close to optimal, requiring only about 2 cycles/color. They're
both faster than my hand-written MMX routine, so I don't need to feel
bad about not hand-optimizing this for x64 builds.
- Removed an extra instruction from DoBlending_MMX, transposed two
instructions, and unrolled it once, shaving off about 80 cycles from the
time required to blend 256 palette entries. Why? Because I tried writing
a C version of the routine using compiler intrinsics and was appalled by
all the extra movq's VC++ added to the code. GCC was better, but still
generated extra instructions. I only wanted a C version because I can't
use inline assembly with VC++'s x64 compiler, and x64 assembly is a bit
of a pain. (It's a pain because Linux and Windows have different calling
conventions, and you need to maintain extra metadata for functions.) So,
the assembly version stays and the C version stays out.
- Removed all the pixel doubling r_detail modes, since the one platform they
were intended to assist (486) actually sees very little benefit from them.
- Rewrote CheckMMX in C and renamed it to CheckCPU.
- Fixed: CPUID function 0x80000005 is specified to return detailed L1 cache
only for AMD processors, so we must not use it on other architectures, or
we end up overwriting the L1 cache line size with 0 or some other number
we don't actually understand.
SVN r1134 (trunk)
2008-08-09 03:13:43 +00:00
|
|
|
set( NO_ASM ON )
|
2008-08-12 02:49:00 +00:00
|
|
|
endif( GAS_PATH )
|
|
|
|
else( UNIX AND X64 )
|
|
|
|
find_program( NASM_PATH NAMES ${NASM_NAMES} )
|
|
|
|
find_program( YASM_PATH yasm )
|
|
|
|
|
2008-09-17 20:24:08 +00:00
|
|
|
if( X64 )
|
|
|
|
if( YASM_PATH )
|
|
|
|
set( ASSEMBLER ${YASM_PATH} )
|
|
|
|
else( YASM_PATH )
|
2008-08-12 02:49:00 +00:00
|
|
|
message( STATUS "Could not find YASM. Disabling assembly code." )
|
- Ported vlinetallasm4 to AMD64 assembly. Even with the increased number of
registers AMD64 provides, this routine still needs to be written as self-
modifying code for maximum performance. The additional registers do allow
for further optimization over the x86 version by allowing all four pixels
to be in flight at the same time. The end result is that AMD64 ASM is about
2.18 times faster than AMD64 C and about 1.06 times faster than x86 ASM.
(For further comparison, AMD64 C and x86 C are practically the same for
this function.) Should I port any more assembly to AMD64, mvlineasm4 is the
most likely candidate, but it's not used enough at this point to bother.
Also, this may or may not work with Linux at the moment, since it doesn't
have the eh_handler metadata. Win64 is easier, since I just need to
structure the function prologue and epilogue properly and use some
assembler directives/macros to automatically generate the metadata. And
that brings up another point: You need YASM to assemble the AMD64 code,
because NASM doesn't support the Win64 metadata directives.
- Added an SSE version of DoBlending. This is strictly C intrinsics.
VC++ still throws around unneccessary register moves. GCC seems to be
pretty close to optimal, requiring only about 2 cycles/color. They're
both faster than my hand-written MMX routine, so I don't need to feel
bad about not hand-optimizing this for x64 builds.
- Removed an extra instruction from DoBlending_MMX, transposed two
instructions, and unrolled it once, shaving off about 80 cycles from the
time required to blend 256 palette entries. Why? Because I tried writing
a C version of the routine using compiler intrinsics and was appalled by
all the extra movq's VC++ added to the code. GCC was better, but still
generated extra instructions. I only wanted a C version because I can't
use inline assembly with VC++'s x64 compiler, and x64 assembly is a bit
of a pain. (It's a pain because Linux and Windows have different calling
conventions, and you need to maintain extra metadata for functions.) So,
the assembly version stays and the C version stays out.
- Removed all the pixel doubling r_detail modes, since the one platform they
were intended to assist (486) actually sees very little benefit from them.
- Rewrote CheckMMX in C and renamed it to CheckCPU.
- Fixed: CPUID function 0x80000005 is specified to return detailed L1 cache
only for AMD processors, so we must not use it on other architectures, or
we end up overwriting the L1 cache line size with 0 or some other number
we don't actually understand.
SVN r1134 (trunk)
2008-08-09 03:13:43 +00:00
|
|
|
set( NO_ASM ON )
|
2008-09-17 20:24:08 +00:00
|
|
|
endif( YASM_PATH )
|
|
|
|
else( X64 )
|
|
|
|
if( NASM_PATH )
|
|
|
|
set( ASSEMBLER ${NASM_PATH} )
|
|
|
|
else( NASM_PATH )
|
|
|
|
message( STATUS "Could not find NASM. Disabling assembly code." )
|
|
|
|
set( NO_ASM ON )
|
|
|
|
endif( NASM_PATH )
|
|
|
|
endif( X64 )
|
2008-08-12 02:49:00 +00:00
|
|
|
endif( UNIX AND X64 )
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
|
|
|
|
# I think the only reason there was a version requirement was because the
|
|
|
|
# executable name for Windows changed from 0.x to 2.0, right? This is
|
|
|
|
# how to do it in case I need to do something similar later.
|
|
|
|
|
|
|
|
# execute_process( COMMAND ${NASM_PATH} -v
|
|
|
|
# OUTPUT_VARIABLE NASM_VER_STRING )
|
|
|
|
# string( REGEX REPLACE ".*version ([0-9]+[.][0-9]+).*" "\\1" NASM_VER "${NASM_VER_STRING}" )
|
|
|
|
# if( NOT NASM_VER LESS 2 )
|
|
|
|
# message( SEND_ERROR "NASM version should be 2 or later. (Installed version is ${NASM_VER}.)" )
|
|
|
|
# endif( NOT NASM_VER LESS 2 )
|
|
|
|
endif( NOT NO_ASM )
|
|
|
|
|
|
|
|
if( NOT NO_ASM )
|
|
|
|
# Valgrind support is meaningless without assembly code.
|
|
|
|
if( VALGRIND )
|
|
|
|
add_definitions( -DVALGRIND_AWARE=1 )
|
|
|
|
# If you're Valgrinding, you probably want to keep symbols around.
|
|
|
|
set( NO_STRIP ON )
|
|
|
|
endif( VALGRIND )
|
|
|
|
|
|
|
|
# Tell CMake how to assemble our files
|
|
|
|
if( UNIX )
|
- Ported vlinetallasm4 to AMD64 assembly. Even with the increased number of
registers AMD64 provides, this routine still needs to be written as self-
modifying code for maximum performance. The additional registers do allow
for further optimization over the x86 version by allowing all four pixels
to be in flight at the same time. The end result is that AMD64 ASM is about
2.18 times faster than AMD64 C and about 1.06 times faster than x86 ASM.
(For further comparison, AMD64 C and x86 C are practically the same for
this function.) Should I port any more assembly to AMD64, mvlineasm4 is the
most likely candidate, but it's not used enough at this point to bother.
Also, this may or may not work with Linux at the moment, since it doesn't
have the eh_handler metadata. Win64 is easier, since I just need to
structure the function prologue and epilogue properly and use some
assembler directives/macros to automatically generate the metadata. And
that brings up another point: You need YASM to assemble the AMD64 code,
because NASM doesn't support the Win64 metadata directives.
- Added an SSE version of DoBlending. This is strictly C intrinsics.
VC++ still throws around unneccessary register moves. GCC seems to be
pretty close to optimal, requiring only about 2 cycles/color. They're
both faster than my hand-written MMX routine, so I don't need to feel
bad about not hand-optimizing this for x64 builds.
- Removed an extra instruction from DoBlending_MMX, transposed two
instructions, and unrolled it once, shaving off about 80 cycles from the
time required to blend 256 palette entries. Why? Because I tried writing
a C version of the routine using compiler intrinsics and was appalled by
all the extra movq's VC++ added to the code. GCC was better, but still
generated extra instructions. I only wanted a C version because I can't
use inline assembly with VC++'s x64 compiler, and x64 assembly is a bit
of a pain. (It's a pain because Linux and Windows have different calling
conventions, and you need to maintain extra metadata for functions.) So,
the assembly version stays and the C version stays out.
- Removed all the pixel doubling r_detail modes, since the one platform they
were intended to assist (486) actually sees very little benefit from them.
- Rewrote CheckMMX in C and renamed it to CheckCPU.
- Fixed: CPUID function 0x80000005 is specified to return detailed L1 cache
only for AMD processors, so we must not use it on other architectures, or
we end up overwriting the L1 cache line size with 0 or some other number
we don't actually understand.
SVN r1134 (trunk)
2008-08-09 03:13:43 +00:00
|
|
|
set( ASM_OUTPUT_EXTENSION .o )
|
|
|
|
if( X64 )
|
2008-08-12 02:49:00 +00:00
|
|
|
set( ASM_FLAGS )
|
|
|
|
set( ASM_SOURCE_EXTENSION .s )
|
- Ported vlinetallasm4 to AMD64 assembly. Even with the increased number of
registers AMD64 provides, this routine still needs to be written as self-
modifying code for maximum performance. The additional registers do allow
for further optimization over the x86 version by allowing all four pixels
to be in flight at the same time. The end result is that AMD64 ASM is about
2.18 times faster than AMD64 C and about 1.06 times faster than x86 ASM.
(For further comparison, AMD64 C and x86 C are practically the same for
this function.) Should I port any more assembly to AMD64, mvlineasm4 is the
most likely candidate, but it's not used enough at this point to bother.
Also, this may or may not work with Linux at the moment, since it doesn't
have the eh_handler metadata. Win64 is easier, since I just need to
structure the function prologue and epilogue properly and use some
assembler directives/macros to automatically generate the metadata. And
that brings up another point: You need YASM to assemble the AMD64 code,
because NASM doesn't support the Win64 metadata directives.
- Added an SSE version of DoBlending. This is strictly C intrinsics.
VC++ still throws around unneccessary register moves. GCC seems to be
pretty close to optimal, requiring only about 2 cycles/color. They're
both faster than my hand-written MMX routine, so I don't need to feel
bad about not hand-optimizing this for x64 builds.
- Removed an extra instruction from DoBlending_MMX, transposed two
instructions, and unrolled it once, shaving off about 80 cycles from the
time required to blend 256 palette entries. Why? Because I tried writing
a C version of the routine using compiler intrinsics and was appalled by
all the extra movq's VC++ added to the code. GCC was better, but still
generated extra instructions. I only wanted a C version because I can't
use inline assembly with VC++'s x64 compiler, and x64 assembly is a bit
of a pain. (It's a pain because Linux and Windows have different calling
conventions, and you need to maintain extra metadata for functions.) So,
the assembly version stays and the C version stays out.
- Removed all the pixel doubling r_detail modes, since the one platform they
were intended to assist (486) actually sees very little benefit from them.
- Rewrote CheckMMX in C and renamed it to CheckCPU.
- Fixed: CPUID function 0x80000005 is specified to return detailed L1 cache
only for AMD processors, so we must not use it on other architectures, or
we end up overwriting the L1 cache line size with 0 or some other number
we don't actually understand.
SVN r1134 (trunk)
2008-08-09 03:13:43 +00:00
|
|
|
else( X64 )
|
2008-08-12 02:49:00 +00:00
|
|
|
set( ASM_FLAGS -f elf -DM_TARGET_LINUX -i${CMAKE_CURRENT_SOURCE_DIR}/ )
|
|
|
|
set( ASM_SOURCE_EXTENSION .asm )
|
- Ported vlinetallasm4 to AMD64 assembly. Even with the increased number of
registers AMD64 provides, this routine still needs to be written as self-
modifying code for maximum performance. The additional registers do allow
for further optimization over the x86 version by allowing all four pixels
to be in flight at the same time. The end result is that AMD64 ASM is about
2.18 times faster than AMD64 C and about 1.06 times faster than x86 ASM.
(For further comparison, AMD64 C and x86 C are practically the same for
this function.) Should I port any more assembly to AMD64, mvlineasm4 is the
most likely candidate, but it's not used enough at this point to bother.
Also, this may or may not work with Linux at the moment, since it doesn't
have the eh_handler metadata. Win64 is easier, since I just need to
structure the function prologue and epilogue properly and use some
assembler directives/macros to automatically generate the metadata. And
that brings up another point: You need YASM to assemble the AMD64 code,
because NASM doesn't support the Win64 metadata directives.
- Added an SSE version of DoBlending. This is strictly C intrinsics.
VC++ still throws around unneccessary register moves. GCC seems to be
pretty close to optimal, requiring only about 2 cycles/color. They're
both faster than my hand-written MMX routine, so I don't need to feel
bad about not hand-optimizing this for x64 builds.
- Removed an extra instruction from DoBlending_MMX, transposed two
instructions, and unrolled it once, shaving off about 80 cycles from the
time required to blend 256 palette entries. Why? Because I tried writing
a C version of the routine using compiler intrinsics and was appalled by
all the extra movq's VC++ added to the code. GCC was better, but still
generated extra instructions. I only wanted a C version because I can't
use inline assembly with VC++'s x64 compiler, and x64 assembly is a bit
of a pain. (It's a pain because Linux and Windows have different calling
conventions, and you need to maintain extra metadata for functions.) So,
the assembly version stays and the C version stays out.
- Removed all the pixel doubling r_detail modes, since the one platform they
were intended to assist (486) actually sees very little benefit from them.
- Rewrote CheckMMX in C and renamed it to CheckCPU.
- Fixed: CPUID function 0x80000005 is specified to return detailed L1 cache
only for AMD processors, so we must not use it on other architectures, or
we end up overwriting the L1 cache line size with 0 or some other number
we don't actually understand.
SVN r1134 (trunk)
2008-08-09 03:13:43 +00:00
|
|
|
endif( X64 )
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
else( UNIX )
|
- Ported vlinetallasm4 to AMD64 assembly. Even with the increased number of
registers AMD64 provides, this routine still needs to be written as self-
modifying code for maximum performance. The additional registers do allow
for further optimization over the x86 version by allowing all four pixels
to be in flight at the same time. The end result is that AMD64 ASM is about
2.18 times faster than AMD64 C and about 1.06 times faster than x86 ASM.
(For further comparison, AMD64 C and x86 C are practically the same for
this function.) Should I port any more assembly to AMD64, mvlineasm4 is the
most likely candidate, but it's not used enough at this point to bother.
Also, this may or may not work with Linux at the moment, since it doesn't
have the eh_handler metadata. Win64 is easier, since I just need to
structure the function prologue and epilogue properly and use some
assembler directives/macros to automatically generate the metadata. And
that brings up another point: You need YASM to assemble the AMD64 code,
because NASM doesn't support the Win64 metadata directives.
- Added an SSE version of DoBlending. This is strictly C intrinsics.
VC++ still throws around unneccessary register moves. GCC seems to be
pretty close to optimal, requiring only about 2 cycles/color. They're
both faster than my hand-written MMX routine, so I don't need to feel
bad about not hand-optimizing this for x64 builds.
- Removed an extra instruction from DoBlending_MMX, transposed two
instructions, and unrolled it once, shaving off about 80 cycles from the
time required to blend 256 palette entries. Why? Because I tried writing
a C version of the routine using compiler intrinsics and was appalled by
all the extra movq's VC++ added to the code. GCC was better, but still
generated extra instructions. I only wanted a C version because I can't
use inline assembly with VC++'s x64 compiler, and x64 assembly is a bit
of a pain. (It's a pain because Linux and Windows have different calling
conventions, and you need to maintain extra metadata for functions.) So,
the assembly version stays and the C version stays out.
- Removed all the pixel doubling r_detail modes, since the one platform they
were intended to assist (486) actually sees very little benefit from them.
- Rewrote CheckMMX in C and renamed it to CheckCPU.
- Fixed: CPUID function 0x80000005 is specified to return detailed L1 cache
only for AMD processors, so we must not use it on other architectures, or
we end up overwriting the L1 cache line size with 0 or some other number
we don't actually understand.
SVN r1134 (trunk)
2008-08-09 03:13:43 +00:00
|
|
|
set( ASM_OUTPUT_EXTENSION .obj )
|
2008-08-12 02:49:00 +00:00
|
|
|
set( ASM_SOURCE_EXTENSION .asm )
|
- Ported vlinetallasm4 to AMD64 assembly. Even with the increased number of
registers AMD64 provides, this routine still needs to be written as self-
modifying code for maximum performance. The additional registers do allow
for further optimization over the x86 version by allowing all four pixels
to be in flight at the same time. The end result is that AMD64 ASM is about
2.18 times faster than AMD64 C and about 1.06 times faster than x86 ASM.
(For further comparison, AMD64 C and x86 C are practically the same for
this function.) Should I port any more assembly to AMD64, mvlineasm4 is the
most likely candidate, but it's not used enough at this point to bother.
Also, this may or may not work with Linux at the moment, since it doesn't
have the eh_handler metadata. Win64 is easier, since I just need to
structure the function prologue and epilogue properly and use some
assembler directives/macros to automatically generate the metadata. And
that brings up another point: You need YASM to assemble the AMD64 code,
because NASM doesn't support the Win64 metadata directives.
- Added an SSE version of DoBlending. This is strictly C intrinsics.
VC++ still throws around unneccessary register moves. GCC seems to be
pretty close to optimal, requiring only about 2 cycles/color. They're
both faster than my hand-written MMX routine, so I don't need to feel
bad about not hand-optimizing this for x64 builds.
- Removed an extra instruction from DoBlending_MMX, transposed two
instructions, and unrolled it once, shaving off about 80 cycles from the
time required to blend 256 palette entries. Why? Because I tried writing
a C version of the routine using compiler intrinsics and was appalled by
all the extra movq's VC++ added to the code. GCC was better, but still
generated extra instructions. I only wanted a C version because I can't
use inline assembly with VC++'s x64 compiler, and x64 assembly is a bit
of a pain. (It's a pain because Linux and Windows have different calling
conventions, and you need to maintain extra metadata for functions.) So,
the assembly version stays and the C version stays out.
- Removed all the pixel doubling r_detail modes, since the one platform they
were intended to assist (486) actually sees very little benefit from them.
- Rewrote CheckMMX in C and renamed it to CheckCPU.
- Fixed: CPUID function 0x80000005 is specified to return detailed L1 cache
only for AMD processors, so we must not use it on other architectures, or
we end up overwriting the L1 cache line size with 0 or some other number
we don't actually understand.
SVN r1134 (trunk)
2008-08-09 03:13:43 +00:00
|
|
|
if( X64 )
|
|
|
|
set( ASM_FLAGS -f win64 -DWIN32 -DWIN64 )
|
|
|
|
else( X64 )
|
2008-08-12 02:49:00 +00:00
|
|
|
set( ASM_FLAGS -f win32 -DWIN32 -i${CMAKE_CURRENT_SOURCE_DIR}/ )
|
- Ported vlinetallasm4 to AMD64 assembly. Even with the increased number of
registers AMD64 provides, this routine still needs to be written as self-
modifying code for maximum performance. The additional registers do allow
for further optimization over the x86 version by allowing all four pixels
to be in flight at the same time. The end result is that AMD64 ASM is about
2.18 times faster than AMD64 C and about 1.06 times faster than x86 ASM.
(For further comparison, AMD64 C and x86 C are practically the same for
this function.) Should I port any more assembly to AMD64, mvlineasm4 is the
most likely candidate, but it's not used enough at this point to bother.
Also, this may or may not work with Linux at the moment, since it doesn't
have the eh_handler metadata. Win64 is easier, since I just need to
structure the function prologue and epilogue properly and use some
assembler directives/macros to automatically generate the metadata. And
that brings up another point: You need YASM to assemble the AMD64 code,
because NASM doesn't support the Win64 metadata directives.
- Added an SSE version of DoBlending. This is strictly C intrinsics.
VC++ still throws around unneccessary register moves. GCC seems to be
pretty close to optimal, requiring only about 2 cycles/color. They're
both faster than my hand-written MMX routine, so I don't need to feel
bad about not hand-optimizing this for x64 builds.
- Removed an extra instruction from DoBlending_MMX, transposed two
instructions, and unrolled it once, shaving off about 80 cycles from the
time required to blend 256 palette entries. Why? Because I tried writing
a C version of the routine using compiler intrinsics and was appalled by
all the extra movq's VC++ added to the code. GCC was better, but still
generated extra instructions. I only wanted a C version because I can't
use inline assembly with VC++'s x64 compiler, and x64 assembly is a bit
of a pain. (It's a pain because Linux and Windows have different calling
conventions, and you need to maintain extra metadata for functions.) So,
the assembly version stays and the C version stays out.
- Removed all the pixel doubling r_detail modes, since the one platform they
were intended to assist (486) actually sees very little benefit from them.
- Rewrote CheckMMX in C and renamed it to CheckCPU.
- Fixed: CPUID function 0x80000005 is specified to return detailed L1 cache
only for AMD processors, so we must not use it on other architectures, or
we end up overwriting the L1 cache line size with 0 or some other number
we don't actually understand.
SVN r1134 (trunk)
2008-08-09 03:13:43 +00:00
|
|
|
endif( X64 )
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
endif( UNIX )
|
|
|
|
if( WIN32 )
|
|
|
|
set( FIXRTEXT fixrtext )
|
|
|
|
endif( WIN32 )
|
- Ported vlinetallasm4 to AMD64 assembly. Even with the increased number of
registers AMD64 provides, this routine still needs to be written as self-
modifying code for maximum performance. The additional registers do allow
for further optimization over the x86 version by allowing all four pixels
to be in flight at the same time. The end result is that AMD64 ASM is about
2.18 times faster than AMD64 C and about 1.06 times faster than x86 ASM.
(For further comparison, AMD64 C and x86 C are practically the same for
this function.) Should I port any more assembly to AMD64, mvlineasm4 is the
most likely candidate, but it's not used enough at this point to bother.
Also, this may or may not work with Linux at the moment, since it doesn't
have the eh_handler metadata. Win64 is easier, since I just need to
structure the function prologue and epilogue properly and use some
assembler directives/macros to automatically generate the metadata. And
that brings up another point: You need YASM to assemble the AMD64 code,
because NASM doesn't support the Win64 metadata directives.
- Added an SSE version of DoBlending. This is strictly C intrinsics.
VC++ still throws around unneccessary register moves. GCC seems to be
pretty close to optimal, requiring only about 2 cycles/color. They're
both faster than my hand-written MMX routine, so I don't need to feel
bad about not hand-optimizing this for x64 builds.
- Removed an extra instruction from DoBlending_MMX, transposed two
instructions, and unrolled it once, shaving off about 80 cycles from the
time required to blend 256 palette entries. Why? Because I tried writing
a C version of the routine using compiler intrinsics and was appalled by
all the extra movq's VC++ added to the code. GCC was better, but still
generated extra instructions. I only wanted a C version because I can't
use inline assembly with VC++'s x64 compiler, and x64 assembly is a bit
of a pain. (It's a pain because Linux and Windows have different calling
conventions, and you need to maintain extra metadata for functions.) So,
the assembly version stays and the C version stays out.
- Removed all the pixel doubling r_detail modes, since the one platform they
were intended to assist (486) actually sees very little benefit from them.
- Rewrote CheckMMX in C and renamed it to CheckCPU.
- Fixed: CPUID function 0x80000005 is specified to return detailed L1 cache
only for AMD processors, so we must not use it on other architectures, or
we end up overwriting the L1 cache line size with 0 or some other number
we don't actually understand.
SVN r1134 (trunk)
2008-08-09 03:13:43 +00:00
|
|
|
message( STATUS "Selected assembler: ${ASSEMBLER}" )
|
2008-08-10 03:25:08 +00:00
|
|
|
MACRO( ADD_ASM_FILE indir infile )
|
|
|
|
set( ASM_OUTPUT_${infile} "${CMAKE_CURRENT_BINARY_DIR}/CMakeFiles/zdoom.dir/${indir}/${infile}${ASM_OUTPUT_EXTENSION}" )
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
if( WIN32 )
|
|
|
|
set( FIXRTEXT_${infile} COMMAND ${FIXRTEXT} "${ASM_OUTPUT_${infile}}" )
|
|
|
|
endif( WIN32 )
|
|
|
|
add_custom_command( OUTPUT ${ASM_OUTPUT_${infile}}
|
2008-08-10 03:25:08 +00:00
|
|
|
COMMAND ${CMAKE_COMMAND} -E make_directory ${CMAKE_CURRENT_BINARY_DIR}/CMakeFiles/zdoom.dir/${indir}
|
2008-08-12 02:49:00 +00:00
|
|
|
COMMAND ${ASSEMBLER} ${ASM_FLAGS} -o"${ASM_OUTPUT_${infile}}" "${CMAKE_CURRENT_SOURCE_DIR}/${indir}/${infile}${ASM_SOURCE_EXTENSION}"
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
${FIXRTEXT_${infile}}
|
2008-08-10 03:25:08 +00:00
|
|
|
DEPENDS ${indir}/${infile}.asm ${FIXRTEXT} )
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
set( ASM_SOURCES ${ASM_SOURCES} "${ASM_OUTPUT_${infile}}" )
|
|
|
|
ENDMACRO( ADD_ASM_FILE )
|
|
|
|
endif( NOT NO_ASM )
|
|
|
|
|
|
|
|
# Set up flags for GCC
|
|
|
|
|
|
|
|
if( CMAKE_COMPILER_IS_GNUCXX )
|
|
|
|
set( REL_CXX_FLAGS "-fno-rtti -fomit-frame-pointer" )
|
|
|
|
set( CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} ${REL_CXX_FLAGS}" )
|
|
|
|
set( CMAKE_CXX_FLAGS_MINSIZEREL "${CMAKE_CXX_FLAGS_MINSIZEREL} ${REL_CXX_FLAGS}" )
|
|
|
|
set( CMAKE_CXX_FLAGS_RELWITHDEBINFO "${CMAKE_CXX_FLAGS_RELWITHDEBINFO} ${REL_CXX_FLAGS}" )
|
|
|
|
|
|
|
|
set( CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wall -Wno-unused -fno-strict-aliasing" )
|
|
|
|
|
|
|
|
if( NOT NO_STRIP )
|
|
|
|
set (CMAKE_EXE_LINKER_FLAGS_RELEASE "${CMAKE_EXE_LINKER_FLAGS_RELEASE} -s" )
|
|
|
|
set (CMAKE_EXE_LINKER_FLAGS_MINSIZEREL "${CMAKE_EXE_LINKER_FLAGS_MINSIZEREL} -s" )
|
|
|
|
endif( NOT NO_STRIP )
|
|
|
|
endif( CMAKE_COMPILER_IS_GNUCXX )
|
|
|
|
|
|
|
|
# Check for functions that may or may not exist.
|
|
|
|
|
|
|
|
CHECK_FUNCTION_EXISTS( filelength FILELENGTH_EXISTS )
|
|
|
|
if( FILELENGTH_EXISTS )
|
|
|
|
add_definitions( -DHAVE_FILELENGTH=1 )
|
|
|
|
endif( FILELENGTH_EXISTS )
|
|
|
|
|
|
|
|
CHECK_FUNCTION_EXISTS( strupr STRUPR_EXISTS )
|
|
|
|
if( NOT STRUPR_EXISTS )
|
|
|
|
add_definitions( -DNEED_STRUPR=1 )
|
|
|
|
endif( NOT STRUPR_EXISTS )
|
|
|
|
|
|
|
|
CHECK_FUNCTION_EXISTS( stricmp STRICMP_EXISTS )
|
|
|
|
if( NOT STRICMP_EXISTS )
|
|
|
|
add_definitions( -Dstricmp=strcasecmp )
|
|
|
|
endif( NOT STRICMP_EXISTS )
|
|
|
|
|
|
|
|
CHECK_FUNCTION_EXISTS( strnicmp STRNICMP_EXISTS )
|
|
|
|
if( NOT STRNICMP_EXISTS )
|
|
|
|
add_definitions( -Dstrnicmp=strncasecmp )
|
|
|
|
endif( NOT STRNICMP_EXISTS )
|
|
|
|
|
|
|
|
if( NOT MSVC )
|
|
|
|
add_definitions( -D__forceinline=inline )
|
|
|
|
endif( NOT MSVC )
|
|
|
|
|
2008-08-10 03:25:08 +00:00
|
|
|
if( UNIX )
|
|
|
|
CHECK_LIBRARY_EXISTS( rt clock_gettime "" CLOCK_GETTIME_IN_RT )
|
|
|
|
if( NOT CLOCK_GETTIME_IN_RT )
|
|
|
|
CHECK_FUNCTION_EXISTS( clock_gettime CLOCK_GETTIME_EXISTS )
|
|
|
|
if( NOT CLOCK_GETTIME_EXISTS )
|
|
|
|
message( STATUS "Could not find clock_gettime. Timing statistics will not be available." )
|
|
|
|
add_definitions( -DNO_CLOCK_GETTIME )
|
|
|
|
endif( NOT CLOCK_GETTIME_EXISTS )
|
|
|
|
else( NOT CLOCK_GETTIME_IN_RT )
|
|
|
|
set( ZDOOM_LIBS ${ZDOOM_LIBS} rt )
|
|
|
|
endif( NOT CLOCK_GETTIME_IN_RT )
|
|
|
|
endif( UNIX )
|
|
|
|
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
# Update svnrevision.h
|
|
|
|
|
2008-07-25 01:41:31 +00:00
|
|
|
add_custom_target( revision_check ALL
|
2008-07-25 01:37:44 +00:00
|
|
|
COMMAND ${CMAKE_BINARY_DIR}/tools/updaterevision/updaterevision . src/svnrevision.h
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
|
|
|
|
DEPENDS updaterevision )
|
|
|
|
|
|
|
|
# Libraries ZDoom needs
|
|
|
|
|
|
|
|
set( ZDOOM_LIBS ${ZDOOM_LIBS} "${ZLIB_LIBRARIES}" "${JPEG_LIBRARIES}" "${FMOD_LIBRARY}" )
|
|
|
|
include_directories( "${ZLIB_INCLUDE_DIR}" "${JPEG_INCLUDE_DIR}" "${FMOD_INCLUDE_DIR}" )
|
|
|
|
|
|
|
|
# Start defining source files for ZDoom
|
|
|
|
|
|
|
|
if( WIN32 )
|
|
|
|
set( SYSTEM_SOURCES_DIR win32 )
|
|
|
|
set( SYSTEM_SOURCES
|
|
|
|
win32/eaxedit.cpp
|
|
|
|
win32/fb_d3d9.cpp
|
|
|
|
win32/fb_d3d9_wipe.cpp
|
|
|
|
win32/fb_ddraw.cpp
|
|
|
|
win32/hardware.cpp
|
|
|
|
win32/helperthread.cpp
|
|
|
|
win32/i_cd.cpp
|
|
|
|
win32/i_crash.cpp
|
|
|
|
win32/i_input.cpp
|
|
|
|
win32/i_main.cpp
|
|
|
|
win32/i_movie.cpp
|
|
|
|
win32/i_system.cpp
|
|
|
|
win32/st_start.cpp
|
|
|
|
win32/win32video.cpp )
|
|
|
|
if( CMAKE_COMPILER_IS_GNUCXX )
|
|
|
|
# CMake is not set up to compile and link rc files with GCC. :(
|
|
|
|
add_custom_command( OUTPUT zdoom-rc.o
|
|
|
|
COMMAND windres -o zdoom-rc.o -i ${CMAKE_CURRENT_SOURCE_DIR}/win32/zdoom.rc
|
|
|
|
DEPENDS win32/zdoom.rc )
|
|
|
|
set( SYSTEM_SOURCES ${SYSTEM_SOURCES} zdoom-rc.o )
|
|
|
|
else( CMAKE_COMPILER_IS_GNUCXX )
|
|
|
|
set( SYSTEM_SOURCES ${SYSTEM_SOURCES} win32/zdoom.rc )
|
|
|
|
endif( CMAKE_COMPILER_IS_GNUCXX )
|
|
|
|
else( WIN32 )
|
|
|
|
set( SYSTEM_SOURCES_DIR sdl )
|
|
|
|
set( SYSTEM_SOURCES
|
|
|
|
sdl/crashcatcher.c
|
|
|
|
sdl/hardware.cpp
|
2008-07-25 01:37:44 +00:00
|
|
|
sdl/i_cd.cpp
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
sdl/i_input.cpp
|
|
|
|
sdl/i_main.cpp
|
|
|
|
sdl/i_movie.cpp
|
|
|
|
sdl/i_system.cpp
|
|
|
|
sdl/sdlvideo.cpp
|
|
|
|
sdl/st_start.cpp )
|
|
|
|
endif( WIN32 )
|
|
|
|
|
2008-08-11 22:29:09 +00:00
|
|
|
if( NO_ASM )
|
|
|
|
add_definitions( -DNOASM )
|
|
|
|
else( NO_ASM )
|
- Ported vlinetallasm4 to AMD64 assembly. Even with the increased number of
registers AMD64 provides, this routine still needs to be written as self-
modifying code for maximum performance. The additional registers do allow
for further optimization over the x86 version by allowing all four pixels
to be in flight at the same time. The end result is that AMD64 ASM is about
2.18 times faster than AMD64 C and about 1.06 times faster than x86 ASM.
(For further comparison, AMD64 C and x86 C are practically the same for
this function.) Should I port any more assembly to AMD64, mvlineasm4 is the
most likely candidate, but it's not used enough at this point to bother.
Also, this may or may not work with Linux at the moment, since it doesn't
have the eh_handler metadata. Win64 is easier, since I just need to
structure the function prologue and epilogue properly and use some
assembler directives/macros to automatically generate the metadata. And
that brings up another point: You need YASM to assemble the AMD64 code,
because NASM doesn't support the Win64 metadata directives.
- Added an SSE version of DoBlending. This is strictly C intrinsics.
VC++ still throws around unneccessary register moves. GCC seems to be
pretty close to optimal, requiring only about 2 cycles/color. They're
both faster than my hand-written MMX routine, so I don't need to feel
bad about not hand-optimizing this for x64 builds.
- Removed an extra instruction from DoBlending_MMX, transposed two
instructions, and unrolled it once, shaving off about 80 cycles from the
time required to blend 256 palette entries. Why? Because I tried writing
a C version of the routine using compiler intrinsics and was appalled by
all the extra movq's VC++ added to the code. GCC was better, but still
generated extra instructions. I only wanted a C version because I can't
use inline assembly with VC++'s x64 compiler, and x64 assembly is a bit
of a pain. (It's a pain because Linux and Windows have different calling
conventions, and you need to maintain extra metadata for functions.) So,
the assembly version stays and the C version stays out.
- Removed all the pixel doubling r_detail modes, since the one platform they
were intended to assist (486) actually sees very little benefit from them.
- Rewrote CheckMMX in C and renamed it to CheckCPU.
- Fixed: CPUID function 0x80000005 is specified to return detailed L1 cache
only for AMD processors, so we must not use it on other architectures, or
we end up overwriting the L1 cache line size with 0 or some other number
we don't actually understand.
SVN r1134 (trunk)
2008-08-09 03:13:43 +00:00
|
|
|
if( X64 )
|
2008-08-10 03:25:08 +00:00
|
|
|
ADD_ASM_FILE( asm_x86_64 tmap3 )
|
- Ported vlinetallasm4 to AMD64 assembly. Even with the increased number of
registers AMD64 provides, this routine still needs to be written as self-
modifying code for maximum performance. The additional registers do allow
for further optimization over the x86 version by allowing all four pixels
to be in flight at the same time. The end result is that AMD64 ASM is about
2.18 times faster than AMD64 C and about 1.06 times faster than x86 ASM.
(For further comparison, AMD64 C and x86 C are practically the same for
this function.) Should I port any more assembly to AMD64, mvlineasm4 is the
most likely candidate, but it's not used enough at this point to bother.
Also, this may or may not work with Linux at the moment, since it doesn't
have the eh_handler metadata. Win64 is easier, since I just need to
structure the function prologue and epilogue properly and use some
assembler directives/macros to automatically generate the metadata. And
that brings up another point: You need YASM to assemble the AMD64 code,
because NASM doesn't support the Win64 metadata directives.
- Added an SSE version of DoBlending. This is strictly C intrinsics.
VC++ still throws around unneccessary register moves. GCC seems to be
pretty close to optimal, requiring only about 2 cycles/color. They're
both faster than my hand-written MMX routine, so I don't need to feel
bad about not hand-optimizing this for x64 builds.
- Removed an extra instruction from DoBlending_MMX, transposed two
instructions, and unrolled it once, shaving off about 80 cycles from the
time required to blend 256 palette entries. Why? Because I tried writing
a C version of the routine using compiler intrinsics and was appalled by
all the extra movq's VC++ added to the code. GCC was better, but still
generated extra instructions. I only wanted a C version because I can't
use inline assembly with VC++'s x64 compiler, and x64 assembly is a bit
of a pain. (It's a pain because Linux and Windows have different calling
conventions, and you need to maintain extra metadata for functions.) So,
the assembly version stays and the C version stays out.
- Removed all the pixel doubling r_detail modes, since the one platform they
were intended to assist (486) actually sees very little benefit from them.
- Rewrote CheckMMX in C and renamed it to CheckCPU.
- Fixed: CPUID function 0x80000005 is specified to return detailed L1 cache
only for AMD processors, so we must not use it on other architectures, or
we end up overwriting the L1 cache line size with 0 or some other number
we don't actually understand.
SVN r1134 (trunk)
2008-08-09 03:13:43 +00:00
|
|
|
else( X64 )
|
2008-08-10 03:25:08 +00:00
|
|
|
ADD_ASM_FILE( asm_ia32 a )
|
|
|
|
ADD_ASM_FILE( asm_ia32 misc )
|
|
|
|
ADD_ASM_FILE( asm_ia32 tmap )
|
|
|
|
ADD_ASM_FILE( asm_ia32 tmap2 )
|
|
|
|
ADD_ASM_FILE( asm_ia32 tmap3 )
|
- Ported vlinetallasm4 to AMD64 assembly. Even with the increased number of
registers AMD64 provides, this routine still needs to be written as self-
modifying code for maximum performance. The additional registers do allow
for further optimization over the x86 version by allowing all four pixels
to be in flight at the same time. The end result is that AMD64 ASM is about
2.18 times faster than AMD64 C and about 1.06 times faster than x86 ASM.
(For further comparison, AMD64 C and x86 C are practically the same for
this function.) Should I port any more assembly to AMD64, mvlineasm4 is the
most likely candidate, but it's not used enough at this point to bother.
Also, this may or may not work with Linux at the moment, since it doesn't
have the eh_handler metadata. Win64 is easier, since I just need to
structure the function prologue and epilogue properly and use some
assembler directives/macros to automatically generate the metadata. And
that brings up another point: You need YASM to assemble the AMD64 code,
because NASM doesn't support the Win64 metadata directives.
- Added an SSE version of DoBlending. This is strictly C intrinsics.
VC++ still throws around unneccessary register moves. GCC seems to be
pretty close to optimal, requiring only about 2 cycles/color. They're
both faster than my hand-written MMX routine, so I don't need to feel
bad about not hand-optimizing this for x64 builds.
- Removed an extra instruction from DoBlending_MMX, transposed two
instructions, and unrolled it once, shaving off about 80 cycles from the
time required to blend 256 palette entries. Why? Because I tried writing
a C version of the routine using compiler intrinsics and was appalled by
all the extra movq's VC++ added to the code. GCC was better, but still
generated extra instructions. I only wanted a C version because I can't
use inline assembly with VC++'s x64 compiler, and x64 assembly is a bit
of a pain. (It's a pain because Linux and Windows have different calling
conventions, and you need to maintain extra metadata for functions.) So,
the assembly version stays and the C version stays out.
- Removed all the pixel doubling r_detail modes, since the one platform they
were intended to assist (486) actually sees very little benefit from them.
- Rewrote CheckMMX in C and renamed it to CheckCPU.
- Fixed: CPUID function 0x80000005 is specified to return detailed L1 cache
only for AMD processors, so we must not use it on other architectures, or
we end up overwriting the L1 cache line size with 0 or some other number
we don't actually understand.
SVN r1134 (trunk)
2008-08-09 03:13:43 +00:00
|
|
|
endif( X64 )
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
if( WIN32 )
|
|
|
|
if( NOT X64 )
|
2008-09-17 19:54:12 +00:00
|
|
|
ADD_ASM_FILE( win32 wrappers )
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
endif( NOT X64 )
|
|
|
|
endif( WIN32 )
|
2008-08-11 22:29:09 +00:00
|
|
|
endif( NO_ASM )
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
|
|
|
|
add_custom_command( OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/xlat_parser.c ${CMAKE_CURRENT_BINARY_DIR}/xlat_parser.h
|
|
|
|
COMMAND ${CMAKE_COMMAND} -E copy_if_different ${CMAKE_CURRENT_SOURCE_DIR}/xlat/xlat_parser.y .
|
2008-07-25 01:37:44 +00:00
|
|
|
COMMAND ${CMAKE_BINARY_DIR}/tools/lemon/lemon xlat_parser.y
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
|
|
|
|
DEPENDS lemon ${CMAKE_CURRENT_SOURCE_DIR}/xlat/xlat_parser.y )
|
|
|
|
|
|
|
|
add_custom_command( OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/sc_man_scanner.h
|
2008-07-25 01:37:44 +00:00
|
|
|
COMMAND ${CMAKE_BINARY_DIR}/tools/re2c/re2c --no-generation-date -s -o ${CMAKE_CURRENT_BINARY_DIR}/sc_man_scanner.h ${CMAKE_CURRENT_SOURCE_DIR}/sc_man_scanner.re
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
DEPENDS re2c ${CMAKE_CURRENT_SOURCE_DIR}/sc_man_scanner.re )
|
|
|
|
|
|
|
|
include_directories( ${CMAKE_CURRENT_BINARY_DIR} )
|
|
|
|
|
|
|
|
add_executable( zdoom WIN32
|
|
|
|
autostart.cpp
|
|
|
|
${ASM_SOURCES}
|
|
|
|
${SYSTEM_SOURCES}
|
|
|
|
am_map.cpp
|
|
|
|
b_bot.cpp
|
|
|
|
b_func.cpp
|
|
|
|
b_game.cpp
|
|
|
|
b_move.cpp
|
|
|
|
b_think.cpp
|
|
|
|
bbannouncer.cpp
|
|
|
|
c_bind.cpp
|
|
|
|
c_cmds.cpp
|
|
|
|
c_console.cpp
|
|
|
|
c_cvars.cpp
|
|
|
|
c_dispatch.cpp
|
|
|
|
c_expr.cpp
|
|
|
|
cmdlib.cpp
|
|
|
|
colormatcher.cpp
|
|
|
|
configfile.cpp
|
|
|
|
ct_chat.cpp
|
|
|
|
d_dehacked.cpp
|
|
|
|
d_main.cpp
|
|
|
|
d_net.cpp
|
|
|
|
d_netinfo.cpp
|
|
|
|
d_protocol.cpp
|
|
|
|
decallib.cpp
|
|
|
|
dobject.cpp
|
|
|
|
dobjgc.cpp
|
|
|
|
dobjtype.cpp
|
|
|
|
doomdef.cpp
|
|
|
|
doomstat.cpp
|
|
|
|
dsectoreffect.cpp
|
|
|
|
dthinker.cpp
|
|
|
|
f_finale.cpp
|
|
|
|
f_wipe.cpp
|
|
|
|
farchive.cpp
|
|
|
|
files.cpp
|
|
|
|
g_game.cpp
|
|
|
|
g_hub.cpp
|
|
|
|
g_level.cpp
|
|
|
|
gameconfigfile.cpp
|
|
|
|
gi.cpp
|
|
|
|
hu_scores.cpp
|
|
|
|
i_net.cpp
|
|
|
|
info.cpp
|
|
|
|
lumpconfigfile.cpp
|
|
|
|
m_alloc.cpp
|
|
|
|
m_argv.cpp
|
|
|
|
m_bbox.cpp
|
|
|
|
m_cheat.cpp
|
|
|
|
m_menu.cpp
|
|
|
|
m_misc.cpp
|
|
|
|
m_options.cpp
|
|
|
|
m_png.cpp
|
|
|
|
m_random.cpp
|
|
|
|
mus2midi.cpp
|
|
|
|
name.cpp
|
|
|
|
nodebuild.cpp
|
|
|
|
nodebuild_classify_nosse2.cpp
|
|
|
|
nodebuild_classify_sse2.cpp
|
|
|
|
nodebuild_events.cpp
|
|
|
|
nodebuild_extract.cpp
|
|
|
|
nodebuild_gl.cpp
|
|
|
|
nodebuild_utility.cpp
|
|
|
|
p_3dmidtex.cpp
|
|
|
|
p_acs.cpp
|
|
|
|
p_buildmap.cpp
|
|
|
|
p_ceiling.cpp
|
|
|
|
p_conversation.cpp
|
|
|
|
p_doors.cpp
|
|
|
|
p_effect.cpp
|
|
|
|
p_enemy.cpp
|
|
|
|
p_enemy_a_lookex.cpp
|
|
|
|
p_floor.cpp
|
|
|
|
p_interaction.cpp
|
|
|
|
p_lights.cpp
|
|
|
|
p_linkedsectors.cpp
|
|
|
|
p_lnspec.cpp
|
|
|
|
p_map.cpp
|
|
|
|
p_maputl.cpp
|
|
|
|
p_mobj.cpp
|
|
|
|
p_pillar.cpp
|
|
|
|
p_plats.cpp
|
|
|
|
p_pspr.cpp
|
|
|
|
p_saveg.cpp
|
|
|
|
p_sectors.cpp
|
|
|
|
p_setup.cpp
|
|
|
|
p_sight.cpp
|
|
|
|
p_slopes.cpp
|
|
|
|
p_spec.cpp
|
2008-09-23 07:46:23 +00:00
|
|
|
p_states.cpp
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
p_switch.cpp
|
|
|
|
p_teleport.cpp
|
|
|
|
p_terrain.cpp
|
|
|
|
p_things.cpp
|
|
|
|
p_tick.cpp
|
|
|
|
p_trace.cpp
|
|
|
|
p_udmf.cpp
|
|
|
|
p_user.cpp
|
|
|
|
p_writemap.cpp
|
|
|
|
p_xlat.cpp
|
|
|
|
parsecontext.cpp
|
|
|
|
po_man.cpp
|
|
|
|
r_anim.cpp
|
|
|
|
r_bsp.cpp
|
|
|
|
r_data.cpp
|
|
|
|
r_draw.cpp
|
|
|
|
r_drawt.cpp
|
|
|
|
r_interpolate.cpp
|
|
|
|
r_main.cpp
|
|
|
|
r_plane.cpp
|
|
|
|
r_polymost.cpp
|
|
|
|
r_segs.cpp
|
|
|
|
r_sky.cpp
|
|
|
|
r_things.cpp
|
|
|
|
r_translate.cpp
|
|
|
|
s_advsound.cpp
|
|
|
|
s_environment.cpp
|
|
|
|
s_playlist.cpp
|
|
|
|
s_sndseq.cpp
|
|
|
|
s_sound.cpp
|
|
|
|
sc_man.cpp
|
|
|
|
st_stuff.cpp
|
|
|
|
stats.cpp
|
|
|
|
stringtable.cpp
|
|
|
|
tables.cpp
|
|
|
|
teaminfo.cpp
|
|
|
|
tempfiles.cpp
|
|
|
|
v_collection.cpp
|
|
|
|
v_draw.cpp
|
|
|
|
v_font.cpp
|
|
|
|
v_palette.cpp
|
|
|
|
v_pfx.cpp
|
|
|
|
v_text.cpp
|
|
|
|
v_video.cpp
|
|
|
|
w_wad.cpp
|
|
|
|
wi_stuff.cpp
|
- Ported vlinetallasm4 to AMD64 assembly. Even with the increased number of
registers AMD64 provides, this routine still needs to be written as self-
modifying code for maximum performance. The additional registers do allow
for further optimization over the x86 version by allowing all four pixels
to be in flight at the same time. The end result is that AMD64 ASM is about
2.18 times faster than AMD64 C and about 1.06 times faster than x86 ASM.
(For further comparison, AMD64 C and x86 C are practically the same for
this function.) Should I port any more assembly to AMD64, mvlineasm4 is the
most likely candidate, but it's not used enough at this point to bother.
Also, this may or may not work with Linux at the moment, since it doesn't
have the eh_handler metadata. Win64 is easier, since I just need to
structure the function prologue and epilogue properly and use some
assembler directives/macros to automatically generate the metadata. And
that brings up another point: You need YASM to assemble the AMD64 code,
because NASM doesn't support the Win64 metadata directives.
- Added an SSE version of DoBlending. This is strictly C intrinsics.
VC++ still throws around unneccessary register moves. GCC seems to be
pretty close to optimal, requiring only about 2 cycles/color. They're
both faster than my hand-written MMX routine, so I don't need to feel
bad about not hand-optimizing this for x64 builds.
- Removed an extra instruction from DoBlending_MMX, transposed two
instructions, and unrolled it once, shaving off about 80 cycles from the
time required to blend 256 palette entries. Why? Because I tried writing
a C version of the routine using compiler intrinsics and was appalled by
all the extra movq's VC++ added to the code. GCC was better, but still
generated extra instructions. I only wanted a C version because I can't
use inline assembly with VC++'s x64 compiler, and x64 assembly is a bit
of a pain. (It's a pain because Linux and Windows have different calling
conventions, and you need to maintain extra metadata for functions.) So,
the assembly version stays and the C version stays out.
- Removed all the pixel doubling r_detail modes, since the one platform they
were intended to assist (486) actually sees very little benefit from them.
- Rewrote CheckMMX in C and renamed it to CheckCPU.
- Fixed: CPUID function 0x80000005 is specified to return detailed L1 cache
only for AMD processors, so we must not use it on other architectures, or
we end up overwriting the L1 cache line size with 0 or some other number
we don't actually understand.
SVN r1134 (trunk)
2008-08-09 03:13:43 +00:00
|
|
|
x86.cpp
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
zstrformat.cpp
|
|
|
|
zstring.cpp
|
|
|
|
g_doom/a_doommisc.cpp
|
|
|
|
g_doom/doom_sbar.cpp
|
|
|
|
g_heretic/a_hereticmisc.cpp
|
|
|
|
g_heretic/heretic_sbar.cpp
|
2008-09-15 14:11:05 +00:00
|
|
|
g_hexen/a_hexenmisc.cpp
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
g_hexen/hexen_sbar.cpp
|
|
|
|
g_raven/a_artitele.cpp
|
|
|
|
g_raven/a_minotaur.cpp
|
|
|
|
g_strife/a_strifestuff.cpp
|
|
|
|
g_strife/strife_sbar.cpp
|
|
|
|
g_shared/a_action.cpp
|
|
|
|
g_shared/a_armor.cpp
|
|
|
|
g_shared/a_artifacts.cpp
|
|
|
|
g_shared/a_bridge.cpp
|
|
|
|
g_shared/a_camera.cpp
|
|
|
|
g_shared/a_debris.cpp
|
|
|
|
g_shared/a_decals.cpp
|
|
|
|
g_shared/a_flashfader.cpp
|
|
|
|
g_shared/a_fountain.cpp
|
|
|
|
g_shared/a_hatetarget.cpp
|
|
|
|
g_shared/a_keys.cpp
|
|
|
|
g_shared/a_lightning.cpp
|
|
|
|
g_shared/a_mapmarker.cpp
|
|
|
|
g_shared/a_morph.cpp
|
|
|
|
g_shared/a_movingcamera.cpp
|
|
|
|
g_shared/a_pickups.cpp
|
|
|
|
g_shared/a_puzzleitems.cpp
|
|
|
|
g_shared/a_quake.cpp
|
|
|
|
g_shared/a_randomspawner.cpp
|
|
|
|
g_shared/a_secrettrigger.cpp
|
|
|
|
g_shared/a_sectoraction.cpp
|
|
|
|
g_shared/a_setcolor.cpp
|
|
|
|
g_shared/a_skies.cpp
|
|
|
|
g_shared/a_soundenvironment.cpp
|
|
|
|
g_shared/a_soundsequence.cpp
|
|
|
|
g_shared/a_spark.cpp
|
|
|
|
g_shared/a_specialspot.cpp
|
|
|
|
g_shared/a_waterzone.cpp
|
|
|
|
g_shared/a_weaponpiece.cpp
|
|
|
|
g_shared/a_weapons.cpp
|
|
|
|
g_shared/hudmessages.cpp
|
|
|
|
g_shared/sbarinfo_display.cpp
|
|
|
|
g_shared/sbarinfo_parser.cpp
|
|
|
|
g_shared/sbar_mugshot.cpp
|
|
|
|
g_shared/shared_hud.cpp
|
|
|
|
g_shared/shared_sbar.cpp
|
|
|
|
oplsynth/fmopl.cpp
|
|
|
|
oplsynth/mlopl.cpp
|
|
|
|
oplsynth/mlopl_io.cpp
|
|
|
|
oplsynth/music_opldumper_mididevice.cpp
|
|
|
|
oplsynth/music_opl_mididevice.cpp
|
|
|
|
oplsynth/opl_mus_player.cpp
|
|
|
|
sound/fmodsound.cpp
|
|
|
|
sound/i_music.cpp
|
|
|
|
sound/i_sound.cpp
|
|
|
|
sound/music_cd.cpp
|
|
|
|
sound/music_dumb.cpp
|
|
|
|
sound/music_midistream.cpp
|
|
|
|
sound/music_midi_base.cpp
|
|
|
|
sound/music_midi_midiout.cpp
|
|
|
|
sound/music_midi_timidity.cpp
|
|
|
|
sound/music_mus_midiout.cpp
|
|
|
|
sound/music_mus_opl.cpp
|
|
|
|
sound/music_spc.cpp
|
|
|
|
sound/music_stream.cpp
|
|
|
|
sound/music_timidity_mididevice.cpp
|
|
|
|
sound/music_win_mididevice.cpp
|
|
|
|
textures/automaptexture.cpp
|
|
|
|
textures/bitmap.cpp
|
|
|
|
textures/buildtexture.cpp
|
|
|
|
textures/canvastexture.cpp
|
|
|
|
textures/ddstexture.cpp
|
|
|
|
textures/flattexture.cpp
|
|
|
|
textures/imgztexture.cpp
|
|
|
|
textures/jpegtexture.cpp
|
|
|
|
textures/multipatchtexture.cpp
|
|
|
|
textures/patchtexture.cpp
|
|
|
|
textures/pcxtexture.cpp
|
|
|
|
textures/pngtexture.cpp
|
|
|
|
textures/rawpagetexture.cpp
|
|
|
|
textures/texture.cpp
|
|
|
|
textures/texturemanager.cpp
|
|
|
|
textures/tgatexture.cpp
|
|
|
|
textures/warptexture.cpp
|
|
|
|
thingdef/olddecorations.cpp
|
|
|
|
thingdef/thingdef.cpp
|
|
|
|
thingdef/thingdef_codeptr.cpp
|
|
|
|
thingdef/thingdef_exp.cpp
|
|
|
|
thingdef/thingdef_main.cpp
|
2008-09-23 07:46:23 +00:00
|
|
|
thingdef/thingdef_parse.cpp
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
thingdef/thingdef_properties.cpp
|
|
|
|
thingdef/thingdef_states.cpp
|
|
|
|
timidity/common.cpp
|
|
|
|
timidity/instrum.cpp
|
|
|
|
timidity/instrum_dls.cpp
|
|
|
|
timidity/instrum_font.cpp
|
|
|
|
timidity/instrum_sf2.cpp
|
|
|
|
timidity/mix.cpp
|
|
|
|
timidity/playmidi.cpp
|
|
|
|
timidity/resample.cpp
|
|
|
|
timidity/timidity.cpp
|
|
|
|
xlat/parse_xlat.cpp
|
|
|
|
autozend.cpp )
|
|
|
|
|
|
|
|
set_source_files_properties( xlat/parse_xlat.cpp PROPERTIES OBJECT_DEPENDS "${CMAKE_CURRENT_BINARY_DIR}/xlat_parser.c" )
|
|
|
|
set_source_files_properties( sc_man.cpp PROPERTIES OBJECT_DEPENDS "${CMAKE_CURRENT_BINARY_DIR}/sc_man_scanner.h" )
|
|
|
|
|
|
|
|
target_link_libraries( zdoom ${ZDOOM_LIBS} snes_spc gdtoa dumb )
|
|
|
|
include_directories( .
|
|
|
|
g_doom
|
|
|
|
g_heretic
|
|
|
|
g_hexen
|
|
|
|
g_raven
|
|
|
|
g_strife
|
|
|
|
g_shared
|
|
|
|
oplsynth
|
|
|
|
sound
|
|
|
|
textures
|
|
|
|
thingdef
|
|
|
|
timidity
|
|
|
|
xlat
|
|
|
|
../snes_spc/snes_spc
|
|
|
|
../gdtoa
|
|
|
|
../dumb/include
|
|
|
|
${CMAKE_BINARY_DIR}/gdtoa
|
|
|
|
${SYSTEM_SOURCES_DIR} )
|
|
|
|
|
|
|
|
add_dependencies( zdoom revision_check )
|
|
|
|
|
2008-07-25 01:37:44 +00:00
|
|
|
# RUNTIME_OUTPUT_DIRECTORY does not exist in CMake 2.4.
|
|
|
|
# Linux distributions are slow to adopt 2.6. :(
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
set_target_properties( zdoom PROPERTIES RUNTIME_OUTPUT_DIRECTORY ${ZDOOM_OUTPUT_DIR} )
|
|
|
|
set_target_properties( zdoom PROPERTIES OUTPUT_NAME ${ZDOOM_EXE_NAME} )
|
|
|
|
|
2008-07-25 01:37:44 +00:00
|
|
|
if( NOT WIN32 )
|
|
|
|
FILE( WRITE ${CMAKE_CURRENT_BINARY_DIR}/link-make "if [ ! -e ${ZDOOM_OUTPUT_DIR}/${ZDOOM_EXE_NAME} ]; then ln -sf ${CMAKE_CURRENT_BINARY_DIR}/${ZDOOM_EXE_NAME} ${ZDOOM_OUTPUT_DIR}/${ZDOOM_EXE_NAME}; fi" )
|
|
|
|
add_custom_command( TARGET zdoom POST_BUILD
|
|
|
|
COMMAND chmod +x ${CMAKE_CURRENT_BINARY_DIR}/link-make
|
|
|
|
COMMAND /bin/sh -c ${CMAKE_CURRENT_BINARY_DIR}/link-make )
|
|
|
|
endif( NOT WIN32 )
|
|
|
|
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
if( CMAKE_COMPILER_IS_GNUCXX )
|
|
|
|
# GCC misoptimizes this file
|
|
|
|
set_source_files_properties( oplsynth/fmopl.cpp PROPERTIES COMPILE_FLAGS "-fno-tree-dominator-opts -fno-tree-fre" )
|
|
|
|
|
|
|
|
# Compile this one file with SSE2 support.
|
|
|
|
set_source_files_properties( nodebuild_classify_sse2.cpp PROPERTIES COMPILE_FLAGS "-msse2 -mfpmath=sse" )
|
- Ported vlinetallasm4 to AMD64 assembly. Even with the increased number of
registers AMD64 provides, this routine still needs to be written as self-
modifying code for maximum performance. The additional registers do allow
for further optimization over the x86 version by allowing all four pixels
to be in flight at the same time. The end result is that AMD64 ASM is about
2.18 times faster than AMD64 C and about 1.06 times faster than x86 ASM.
(For further comparison, AMD64 C and x86 C are practically the same for
this function.) Should I port any more assembly to AMD64, mvlineasm4 is the
most likely candidate, but it's not used enough at this point to bother.
Also, this may or may not work with Linux at the moment, since it doesn't
have the eh_handler metadata. Win64 is easier, since I just need to
structure the function prologue and epilogue properly and use some
assembler directives/macros to automatically generate the metadata. And
that brings up another point: You need YASM to assemble the AMD64 code,
because NASM doesn't support the Win64 metadata directives.
- Added an SSE version of DoBlending. This is strictly C intrinsics.
VC++ still throws around unneccessary register moves. GCC seems to be
pretty close to optimal, requiring only about 2 cycles/color. They're
both faster than my hand-written MMX routine, so I don't need to feel
bad about not hand-optimizing this for x64 builds.
- Removed an extra instruction from DoBlending_MMX, transposed two
instructions, and unrolled it once, shaving off about 80 cycles from the
time required to blend 256 palette entries. Why? Because I tried writing
a C version of the routine using compiler intrinsics and was appalled by
all the extra movq's VC++ added to the code. GCC was better, but still
generated extra instructions. I only wanted a C version because I can't
use inline assembly with VC++'s x64 compiler, and x64 assembly is a bit
of a pain. (It's a pain because Linux and Windows have different calling
conventions, and you need to maintain extra metadata for functions.) So,
the assembly version stays and the C version stays out.
- Removed all the pixel doubling r_detail modes, since the one platform they
were intended to assist (486) actually sees very little benefit from them.
- Rewrote CheckMMX in C and renamed it to CheckCPU.
- Fixed: CPUID function 0x80000005 is specified to return detailed L1 cache
only for AMD processors, so we must not use it on other architectures, or
we end up overwriting the L1 cache line size with 0 or some other number
we don't actually understand.
SVN r1134 (trunk)
2008-08-09 03:13:43 +00:00
|
|
|
|
|
|
|
# Need to enable intrinsics for this file.
|
|
|
|
set_source_files_properties( x86.cpp PROPERTIES COMPILE_FLAGS "-msse2 -mmmx" )
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
endif( CMAKE_COMPILER_IS_GNUCXX )
|
|
|
|
|
|
|
|
if( MSVC )
|
|
|
|
# Compile this one file with SSE2 support.
|
|
|
|
set_source_files_properties( nodebuild_classify_sse2.cpp PROPERTIES COMPILE_FLAGS "/arch:SSE2" )
|
|
|
|
endif( MSVC )
|