gzdoom/src/gameconfigfile.cpp

967 lines
29 KiB
C++
Raw Normal View History

2016-03-01 15:47:10 +00:00
/*
** gameconfigfile.cpp
** An .ini parser specifically for zdoom.ini
**
**---------------------------------------------------------------------------
** Copyright 1998-2008 Randy Heit
** All rights reserved.
**
** Redistribution and use in source and binary forms, with or without
** modification, are permitted provided that the following conditions
** are met:
**
** 1. Redistributions of source code must retain the above copyright
** notice, this list of conditions and the following disclaimer.
** 2. Redistributions in binary form must reproduce the above copyright
** notice, this list of conditions and the following disclaimer in the
** documentation and/or other materials provided with the distribution.
** 3. The name of the author may not be used to endorse or promote products
** derived from this software without specific prior written permission.
**
** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OFf
** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
**---------------------------------------------------------------------------
**
*/
#include <stdio.h>
#include "gameconfigfile.h"
#include "c_cvars.h"
#include "c_dispatch.h"
#include "c_bind.h"
#include "m_argv.h"
#include "cmdlib.h"
#include "version.h"
#include "m_misc.h"
#include "v_font.h"
#include "a_pickups.h"
#include "doomstat.h"
#include "gi.h"
#include "d_main.h"
#include "v_video.h"
- fixed compilation errors with POSIX targets src/posix/cocoa/i_video.mm:559:2: error: use of undeclared identifier 'atterm' src/posix/sdl/hardware.cpp:85:28: error: ‘atterm’ was not declared in this scope src/posix/sdl/i_input.cpp:261:10: error: ‘gamestate’ was not declared in this scope src/posix/sdl/i_input.cpp:261:23: error: ‘GS_LEVEL’ was not declared in this scope src/posix/sdl/i_input.cpp:263:48: error: ‘GS_INTERMISSION’ was not declared in this scope src/posix/sdl/i_input.cpp:263:80: error: ‘GS_FINALE’ was not declared in this scope src/posix/sdl/i_system.cpp:115:25: error: ‘atterm’ was not declared in this scope src/posix/sdl/i_system.cpp:372:30: error: invalid use of incomplete type ‘const struct dirent’ src/posix/sdl/i_system.cpp:375:42: error: ‘findstate_t’ has not been declared src/posix/sdl/i_system.cpp:391:12: error: request for member ‘current’ in ‘* fileinfo’, which is of non-class type ‘int’ src/posix/sdl/i_system.cpp:392:12: error: request for member ‘count’ in ‘* fileinfo’, which is of non-class type ‘int’ src/posix/sdl/i_system.cpp:392:56: error: request for member ‘namelist’ in ‘* fileinfo’, which is of non-class type ‘int’ src/posix/sdl/i_system.cpp:393:22: error: ‘alphasort’ was not declared in this scope src/posix/sdl/i_system.cpp:393:31: error: ‘scandir’ was not declared in this scope src/posix/sdl/i_system.cpp:394:16: error: request for member ‘count’ in ‘* fileinfo’, which is of non-class type ‘int’ src/posix/sdl/i_system.cpp:401:31: error: ‘findstate_t’ has not been declared src/posix/sdl/i_system.cpp:403:2: error: ‘findstate_t’ was not declared in this scope src/posix/sdl/i_system.cpp:403:15: error: ‘state’ was not declared in this scope src/posix/sdl/i_system.cpp:403:37: error: expected primary-expression before ‘)’ token src/posix/sdl/i_system.cpp:404:33: error: request for member ‘count’ in ‘* fileinfo’, which is of non-class type ‘int’ src/posix/sdl/i_system.cpp:406:39: error: request for member ‘count’ in ‘* fileinfo’, which is of non-class type ‘int’ src/posix/sdl/i_system.cpp:413:2: error: ‘findstate_t’ was not declared in this scope src/posix/sdl/i_system.cpp:413:15: error: ‘state’ was not declared in this scope src/posix/sdl/i_system.cpp:413:37: error: expected primary-expression before ‘)’ token src/posix/sdl/i_system.cpp:425:16: error: ‘findstate_t’ was not declared in this scope src/posix/sdl/i_system.cpp:425:29: error: expected primary-expression before ‘const’ src/posix/sdl/i_system.cpp:426:1: error: expected ‘,’ or ‘;’ before ‘{’ token src/posix/sdl/i_main.cpp:160:6: error: ‘gamestate’ was not declared in this scope src/posix/sdl/i_main.cpp:160:19: error: ‘GS_LEVEL’ was not declared in this scope src/posix/sdl/i_main.cpp:160:44: error: ‘GS_TITLELEVEL’ was not declared in this scope src/posix/sdl/i_main.cpp:217:18: error: ‘atterm’ was not declared in this scope src/posix/sdl/i_main.cpp:242:11: error: ‘I_Quit’ was not declared in this scope src/gameconfigfile.cpp:126:27: error: ‘SHARE_DIR’ was not declared in this scope src/scripting/decorate/thingdef_parse.cpp:929:2: error: use of undeclared identifier 'strlwr'; did you mean 'strlen'? src/scripting/decorate/thingdef_parse.cpp:937:3: error: use of undeclared identifier 'strlwr'; did you mean 'strlen'? src/scripting/decorate/thingdef_states.cpp:564:2: error: use of undeclared identifier 'strlwr'; did you mean 'strlen'? src/scripting/vm/jit_runtime.cpp:957:2: error: ‘unique_ptr’ is not a member of ‘std’ src/scripting/vm/jit_runtime.cpp:957:38: error: expected primary-expression before ‘>’ token src/scripting/vm/jit_runtime.cpp:957:40: error: ‘nativeSymbols’ was not declared in this scope src/utility/cmdlib.cpp:962:2: error: ‘DIR’ was not declared in this scope src/utility/cmdlib.cpp:962:7: error: ‘directory’ was not declared in this scope src/utility/cmdlib.cpp:962:34: error: ‘opendir’ was not declared in this scope src/utility/cmdlib.cpp:967:33: error: ‘readdir’ was not declared in this scope src/utility/cmdlib.cpp:969:10: error: invalid use of incomplete type ‘struct ScanDirectory(TArray<FFileList>&, const char*)::dirent’ src/utility/cmdlib.cpp:973:34: error: invalid use of incomplete type ‘struct ScanDirectory(TArray<FFileList>&, const char*)::dirent’ src/utility/cmdlib.cpp:985:20: error: ‘closedir’ was not declared in this scope
2019-02-01 08:37:05 +00:00
#if !defined _MSC_VER && !defined __APPLE__
#include "i_system.h" // for SHARE_DIR
#endif // !_MSC_VER && !__APPLE__
2016-03-01 15:47:10 +00:00
EXTERN_CVAR (Bool, con_centernotify)
EXTERN_CVAR (Int, msg0color)
EXTERN_CVAR (Color, color)
EXTERN_CVAR (Float, dimamount)
EXTERN_CVAR (Int, msgmidcolor)
EXTERN_CVAR (Int, msgmidcolor2)
EXTERN_CVAR (Bool, snd_pitched)
EXTERN_CVAR (Color, am_wallcolor)
EXTERN_CVAR (Color, am_fdwallcolor)
EXTERN_CVAR (Color, am_cdwallcolor)
EXTERN_CVAR (Bool, wi_percents)
EXTERN_CVAR (Int, gl_texture_hqresizemode)
EXTERN_CVAR (Int, gl_texture_hqresizemult)
EXTERN_CVAR (Int, vid_preferbackend)
EXTERN_CVAR (Float, vid_scale_custompixelaspect)
EXTERN_CVAR (Bool, vid_scale_linear)
EXTERN_CVAR(Float, m_sensitivity_x)
EXTERN_CVAR(Float, m_sensitivity_y)
EXTERN_CVAR(Int, adl_volume_model)
EXTERN_CVAR (Int, gl_texture_hqresize_targets)
EXTERN_CVAR(Int, wipetype)
#ifdef _WIN32
EXTERN_CVAR(Int, in_mouse)
#endif
2016-03-01 15:47:10 +00:00
FGameConfigFile::FGameConfigFile ()
{
#ifdef __APPLE__
FString user_docs, user_app_support, local_app_support;
M_GetMacSearchDirectories(user_docs, user_app_support, local_app_support);
2016-03-01 15:47:10 +00:00
#endif
2016-03-01 15:47:10 +00:00
FString pathname;
OkayToWrite = false; // Do not allow saving of the config before DoKeySetup()
2016-03-01 15:47:10 +00:00
bModSetup = false;
pathname = GetConfigPath (true);
ChangePathName (pathname);
LoadConfigFile ();
// If zdoom.ini was read from the program directory, switch
// to the user directory now. If it was read from the user
// directory, this effectively does nothing.
pathname = GetConfigPath (false);
ChangePathName (pathname);
// Set default IWAD search paths if none present
if (!SetSection ("IWADSearch.Directories"))
{
SetSection ("IWADSearch.Directories", true);
SetValueForKey ("Path", ".", true);
SetValueForKey ("Path", "$DOOMWADDIR", true);
#ifdef __APPLE__
SetValueForKey ("Path", user_docs, true);
SetValueForKey ("Path", user_app_support, true);
2016-03-01 15:47:10 +00:00
SetValueForKey ("Path", "$PROGDIR", true);
SetValueForKey ("Path", local_app_support, true);
2016-03-01 15:47:10 +00:00
#elif !defined(__unix__)
SetValueForKey ("Path", "$HOME", true);
SetValueForKey ("Path", "$PROGDIR", true);
#else
SetValueForKey ("Path", "$HOME/" GAME_DIR, true);
SetValueForKey ("Path", "$HOME/.local/share/games/doom", true);
2016-03-01 15:47:10 +00:00
// Arch Linux likes them in /usr/share/doom
// Debian likes them in /usr/share/games/doom
// I assume other distributions don't do anything radically different
SetValueForKey ("Path", "/usr/local/share/doom", true);
SetValueForKey ("Path", "/usr/local/share/games/doom", true);
SetValueForKey ("Path", "/usr/share/doom", true);
SetValueForKey ("Path", "/usr/share/games/doom", true);
#endif
}
// Set default search paths if none present
if (!SetSection ("FileSearch.Directories"))
{
SetSection ("FileSearch.Directories", true);
#ifdef __APPLE__
SetValueForKey ("Path", user_docs, true);
SetValueForKey ("Path", user_app_support, true);
SetValueForKey ("Path", "$PROGDIR", true);
SetValueForKey ("Path", local_app_support, true);
#elif !defined(__unix__)
SetValueForKey ("Path", "$PROGDIR", true);
#else
SetValueForKey ("Path", "$HOME/" GAME_DIR, true);
SetValueForKey ("Path", "$HOME/.local/share/games/doom", true);
SetValueForKey ("Path", SHARE_DIR, true);
SetValueForKey ("Path", "/usr/local/share/doom", true);
SetValueForKey ("Path", "/usr/local/share/games/doom", true);
SetValueForKey ("Path", "/usr/share/doom", true);
SetValueForKey ("Path", "/usr/share/games/doom", true);
2016-03-01 15:47:10 +00:00
#endif
SetValueForKey ("Path", "$DOOMWADDIR", true);
}
// Set default search paths if none present
if (!SetSection("SoundfontSearch.Directories"))
{
SetSection("SoundfontSearch.Directories", true);
#ifdef __APPLE__
SetValueForKey("Path", user_docs + "/soundfonts", true);
Upgrade libADLMIDI and libOPNMIDI Added full-panning stereo, improvement of channel management, and many other things. Also, I have implemented an ability to use custom WOPL (for libADLMIDI) and WOPN (for libOPNMIDI) banks from the same path as "soundfonts", but also, in the same environment, the "fm_banks" folder was added for WOPL/WOPN storing purposes. To toggle usage of embedded or custom bank, I have added togglable booleans. When bank fails to be loaded, the default embedded bank is getting to be used as fallback. ADLMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Fixed correctness of CMF files playing * Fixed unnecessary overuse of chip channels by blank notes * Added API to disable specific MIDI tracks or play one of MIDI tracks solo * Added support for more complex loop (loopStart=XX, loopEnd=0). Where XX - count of loops, or 0 - infinite. Nested loops are supported without of any limits. * Added working implementation of TMB's velocity offset * Added support for full-panning stereo option (Thanks to [Christopher Snowhill](https://github.com/kode54) for a work!) * Fixed inability to play high notes due physical tone frequency out of range on the OPL3 chip OPNMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Resolved a trouble which sometimes makes a junk noise sound and unnecessary overuse of chip channels * Volume models support taken from libADLMIDI has been adapted to OPN2's chip speficis * Fixed inability to play high notes due physical tone frequency out of range on the OPN2 chip * Added support for full-panning stereo option ADL&OPN Hotfix: re-calculated default banks The fix on side of measurer of OPL3-BE and OPN2-BE where some instruments getting zero releasing time.
2018-10-01 21:07:05 +00:00
SetValueForKey("Path", user_docs + "/fm_banks", true);
SetValueForKey("Path", user_app_support + "/soundfonts", true);
Upgrade libADLMIDI and libOPNMIDI Added full-panning stereo, improvement of channel management, and many other things. Also, I have implemented an ability to use custom WOPL (for libADLMIDI) and WOPN (for libOPNMIDI) banks from the same path as "soundfonts", but also, in the same environment, the "fm_banks" folder was added for WOPL/WOPN storing purposes. To toggle usage of embedded or custom bank, I have added togglable booleans. When bank fails to be loaded, the default embedded bank is getting to be used as fallback. ADLMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Fixed correctness of CMF files playing * Fixed unnecessary overuse of chip channels by blank notes * Added API to disable specific MIDI tracks or play one of MIDI tracks solo * Added support for more complex loop (loopStart=XX, loopEnd=0). Where XX - count of loops, or 0 - infinite. Nested loops are supported without of any limits. * Added working implementation of TMB's velocity offset * Added support for full-panning stereo option (Thanks to [Christopher Snowhill](https://github.com/kode54) for a work!) * Fixed inability to play high notes due physical tone frequency out of range on the OPL3 chip OPNMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Resolved a trouble which sometimes makes a junk noise sound and unnecessary overuse of chip channels * Volume models support taken from libADLMIDI has been adapted to OPN2's chip speficis * Fixed inability to play high notes due physical tone frequency out of range on the OPN2 chip * Added support for full-panning stereo option ADL&OPN Hotfix: re-calculated default banks The fix on side of measurer of OPL3-BE and OPN2-BE where some instruments getting zero releasing time.
2018-10-01 21:07:05 +00:00
SetValueForKey("Path", user_app_support + "/fm_banks", true);
SetValueForKey("Path", "$PROGDIR/soundfonts", true);
Upgrade libADLMIDI and libOPNMIDI Added full-panning stereo, improvement of channel management, and many other things. Also, I have implemented an ability to use custom WOPL (for libADLMIDI) and WOPN (for libOPNMIDI) banks from the same path as "soundfonts", but also, in the same environment, the "fm_banks" folder was added for WOPL/WOPN storing purposes. To toggle usage of embedded or custom bank, I have added togglable booleans. When bank fails to be loaded, the default embedded bank is getting to be used as fallback. ADLMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Fixed correctness of CMF files playing * Fixed unnecessary overuse of chip channels by blank notes * Added API to disable specific MIDI tracks or play one of MIDI tracks solo * Added support for more complex loop (loopStart=XX, loopEnd=0). Where XX - count of loops, or 0 - infinite. Nested loops are supported without of any limits. * Added working implementation of TMB's velocity offset * Added support for full-panning stereo option (Thanks to [Christopher Snowhill](https://github.com/kode54) for a work!) * Fixed inability to play high notes due physical tone frequency out of range on the OPL3 chip OPNMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Resolved a trouble which sometimes makes a junk noise sound and unnecessary overuse of chip channels * Volume models support taken from libADLMIDI has been adapted to OPN2's chip speficis * Fixed inability to play high notes due physical tone frequency out of range on the OPN2 chip * Added support for full-panning stereo option ADL&OPN Hotfix: re-calculated default banks The fix on side of measurer of OPL3-BE and OPN2-BE where some instruments getting zero releasing time.
2018-10-01 21:07:05 +00:00
SetValueForKey("Path", "$PROGDIR/fm_banks", true);
SetValueForKey("Path", local_app_support + "/soundfonts", true);
Upgrade libADLMIDI and libOPNMIDI Added full-panning stereo, improvement of channel management, and many other things. Also, I have implemented an ability to use custom WOPL (for libADLMIDI) and WOPN (for libOPNMIDI) banks from the same path as "soundfonts", but also, in the same environment, the "fm_banks" folder was added for WOPL/WOPN storing purposes. To toggle usage of embedded or custom bank, I have added togglable booleans. When bank fails to be loaded, the default embedded bank is getting to be used as fallback. ADLMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Fixed correctness of CMF files playing * Fixed unnecessary overuse of chip channels by blank notes * Added API to disable specific MIDI tracks or play one of MIDI tracks solo * Added support for more complex loop (loopStart=XX, loopEnd=0). Where XX - count of loops, or 0 - infinite. Nested loops are supported without of any limits. * Added working implementation of TMB's velocity offset * Added support for full-panning stereo option (Thanks to [Christopher Snowhill](https://github.com/kode54) for a work!) * Fixed inability to play high notes due physical tone frequency out of range on the OPL3 chip OPNMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Resolved a trouble which sometimes makes a junk noise sound and unnecessary overuse of chip channels * Volume models support taken from libADLMIDI has been adapted to OPN2's chip speficis * Fixed inability to play high notes due physical tone frequency out of range on the OPN2 chip * Added support for full-panning stereo option ADL&OPN Hotfix: re-calculated default banks The fix on side of measurer of OPL3-BE and OPN2-BE where some instruments getting zero releasing time.
2018-10-01 21:07:05 +00:00
SetValueForKey("Path", local_app_support + "/fm_banks", true);
#elif !defined(__unix__)
SetValueForKey("Path", "$PROGDIR/soundfonts", true);
Upgrade libADLMIDI and libOPNMIDI Added full-panning stereo, improvement of channel management, and many other things. Also, I have implemented an ability to use custom WOPL (for libADLMIDI) and WOPN (for libOPNMIDI) banks from the same path as "soundfonts", but also, in the same environment, the "fm_banks" folder was added for WOPL/WOPN storing purposes. To toggle usage of embedded or custom bank, I have added togglable booleans. When bank fails to be loaded, the default embedded bank is getting to be used as fallback. ADLMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Fixed correctness of CMF files playing * Fixed unnecessary overuse of chip channels by blank notes * Added API to disable specific MIDI tracks or play one of MIDI tracks solo * Added support for more complex loop (loopStart=XX, loopEnd=0). Where XX - count of loops, or 0 - infinite. Nested loops are supported without of any limits. * Added working implementation of TMB's velocity offset * Added support for full-panning stereo option (Thanks to [Christopher Snowhill](https://github.com/kode54) for a work!) * Fixed inability to play high notes due physical tone frequency out of range on the OPL3 chip OPNMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Resolved a trouble which sometimes makes a junk noise sound and unnecessary overuse of chip channels * Volume models support taken from libADLMIDI has been adapted to OPN2's chip speficis * Fixed inability to play high notes due physical tone frequency out of range on the OPN2 chip * Added support for full-panning stereo option ADL&OPN Hotfix: re-calculated default banks The fix on side of measurer of OPL3-BE and OPN2-BE where some instruments getting zero releasing time.
2018-10-01 21:07:05 +00:00
SetValueForKey("Path", "$PROGDIR/fm_banks", true);
#else
SetValueForKey("Path", "$HOME/" GAME_DIR "/soundfonts", true);
Upgrade libADLMIDI and libOPNMIDI Added full-panning stereo, improvement of channel management, and many other things. Also, I have implemented an ability to use custom WOPL (for libADLMIDI) and WOPN (for libOPNMIDI) banks from the same path as "soundfonts", but also, in the same environment, the "fm_banks" folder was added for WOPL/WOPN storing purposes. To toggle usage of embedded or custom bank, I have added togglable booleans. When bank fails to be loaded, the default embedded bank is getting to be used as fallback. ADLMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Fixed correctness of CMF files playing * Fixed unnecessary overuse of chip channels by blank notes * Added API to disable specific MIDI tracks or play one of MIDI tracks solo * Added support for more complex loop (loopStart=XX, loopEnd=0). Where XX - count of loops, or 0 - infinite. Nested loops are supported without of any limits. * Added working implementation of TMB's velocity offset * Added support for full-panning stereo option (Thanks to [Christopher Snowhill](https://github.com/kode54) for a work!) * Fixed inability to play high notes due physical tone frequency out of range on the OPL3 chip OPNMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Resolved a trouble which sometimes makes a junk noise sound and unnecessary overuse of chip channels * Volume models support taken from libADLMIDI has been adapted to OPN2's chip speficis * Fixed inability to play high notes due physical tone frequency out of range on the OPN2 chip * Added support for full-panning stereo option ADL&OPN Hotfix: re-calculated default banks The fix on side of measurer of OPL3-BE and OPN2-BE where some instruments getting zero releasing time.
2018-10-01 21:07:05 +00:00
SetValueForKey("Path", "$HOME/" GAME_DIR "/fm_banks", true);
SetValueForKey("Path", "$HOME/.local/share/games/doom/soundfonts", true);
SetValueForKey("Path", "$HOME/.local/share/games/doom/fm_banks", true);
SetValueForKey("Path", "/usr/local/share/doom/soundfonts", true);
Upgrade libADLMIDI and libOPNMIDI Added full-panning stereo, improvement of channel management, and many other things. Also, I have implemented an ability to use custom WOPL (for libADLMIDI) and WOPN (for libOPNMIDI) banks from the same path as "soundfonts", but also, in the same environment, the "fm_banks" folder was added for WOPL/WOPN storing purposes. To toggle usage of embedded or custom bank, I have added togglable booleans. When bank fails to be loaded, the default embedded bank is getting to be used as fallback. ADLMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Fixed correctness of CMF files playing * Fixed unnecessary overuse of chip channels by blank notes * Added API to disable specific MIDI tracks or play one of MIDI tracks solo * Added support for more complex loop (loopStart=XX, loopEnd=0). Where XX - count of loops, or 0 - infinite. Nested loops are supported without of any limits. * Added working implementation of TMB's velocity offset * Added support for full-panning stereo option (Thanks to [Christopher Snowhill](https://github.com/kode54) for a work!) * Fixed inability to play high notes due physical tone frequency out of range on the OPL3 chip OPNMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Resolved a trouble which sometimes makes a junk noise sound and unnecessary overuse of chip channels * Volume models support taken from libADLMIDI has been adapted to OPN2's chip speficis * Fixed inability to play high notes due physical tone frequency out of range on the OPN2 chip * Added support for full-panning stereo option ADL&OPN Hotfix: re-calculated default banks The fix on side of measurer of OPL3-BE and OPN2-BE where some instruments getting zero releasing time.
2018-10-01 21:07:05 +00:00
SetValueForKey("Path", "/usr/local/share/doom/fm_banks", true);
SetValueForKey("Path", "/usr/local/share/games/doom/soundfonts", true);
Upgrade libADLMIDI and libOPNMIDI Added full-panning stereo, improvement of channel management, and many other things. Also, I have implemented an ability to use custom WOPL (for libADLMIDI) and WOPN (for libOPNMIDI) banks from the same path as "soundfonts", but also, in the same environment, the "fm_banks" folder was added for WOPL/WOPN storing purposes. To toggle usage of embedded or custom bank, I have added togglable booleans. When bank fails to be loaded, the default embedded bank is getting to be used as fallback. ADLMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Fixed correctness of CMF files playing * Fixed unnecessary overuse of chip channels by blank notes * Added API to disable specific MIDI tracks or play one of MIDI tracks solo * Added support for more complex loop (loopStart=XX, loopEnd=0). Where XX - count of loops, or 0 - infinite. Nested loops are supported without of any limits. * Added working implementation of TMB's velocity offset * Added support for full-panning stereo option (Thanks to [Christopher Snowhill](https://github.com/kode54) for a work!) * Fixed inability to play high notes due physical tone frequency out of range on the OPL3 chip OPNMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Resolved a trouble which sometimes makes a junk noise sound and unnecessary overuse of chip channels * Volume models support taken from libADLMIDI has been adapted to OPN2's chip speficis * Fixed inability to play high notes due physical tone frequency out of range on the OPN2 chip * Added support for full-panning stereo option ADL&OPN Hotfix: re-calculated default banks The fix on side of measurer of OPL3-BE and OPN2-BE where some instruments getting zero releasing time.
2018-10-01 21:07:05 +00:00
SetValueForKey("Path", "/usr/local/share/games/doom/fm_banks", true);
SetValueForKey("Path", "/usr/share/doom/soundfonts", true);
Upgrade libADLMIDI and libOPNMIDI Added full-panning stereo, improvement of channel management, and many other things. Also, I have implemented an ability to use custom WOPL (for libADLMIDI) and WOPN (for libOPNMIDI) banks from the same path as "soundfonts", but also, in the same environment, the "fm_banks" folder was added for WOPL/WOPN storing purposes. To toggle usage of embedded or custom bank, I have added togglable booleans. When bank fails to be loaded, the default embedded bank is getting to be used as fallback. ADLMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Fixed correctness of CMF files playing * Fixed unnecessary overuse of chip channels by blank notes * Added API to disable specific MIDI tracks or play one of MIDI tracks solo * Added support for more complex loop (loopStart=XX, loopEnd=0). Where XX - count of loops, or 0 - infinite. Nested loops are supported without of any limits. * Added working implementation of TMB's velocity offset * Added support for full-panning stereo option (Thanks to [Christopher Snowhill](https://github.com/kode54) for a work!) * Fixed inability to play high notes due physical tone frequency out of range on the OPL3 chip OPNMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Resolved a trouble which sometimes makes a junk noise sound and unnecessary overuse of chip channels * Volume models support taken from libADLMIDI has been adapted to OPN2's chip speficis * Fixed inability to play high notes due physical tone frequency out of range on the OPN2 chip * Added support for full-panning stereo option ADL&OPN Hotfix: re-calculated default banks The fix on side of measurer of OPL3-BE and OPN2-BE where some instruments getting zero releasing time.
2018-10-01 21:07:05 +00:00
SetValueForKey("Path", "/usr/share/doom/fm_banks", true);
SetValueForKey("Path", "/usr/share/games/doom/soundfonts", true);
Upgrade libADLMIDI and libOPNMIDI Added full-panning stereo, improvement of channel management, and many other things. Also, I have implemented an ability to use custom WOPL (for libADLMIDI) and WOPN (for libOPNMIDI) banks from the same path as "soundfonts", but also, in the same environment, the "fm_banks" folder was added for WOPL/WOPN storing purposes. To toggle usage of embedded or custom bank, I have added togglable booleans. When bank fails to be loaded, the default embedded bank is getting to be used as fallback. ADLMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Fixed correctness of CMF files playing * Fixed unnecessary overuse of chip channels by blank notes * Added API to disable specific MIDI tracks or play one of MIDI tracks solo * Added support for more complex loop (loopStart=XX, loopEnd=0). Where XX - count of loops, or 0 - infinite. Nested loops are supported without of any limits. * Added working implementation of TMB's velocity offset * Added support for full-panning stereo option (Thanks to [Christopher Snowhill](https://github.com/kode54) for a work!) * Fixed inability to play high notes due physical tone frequency out of range on the OPL3 chip OPNMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Resolved a trouble which sometimes makes a junk noise sound and unnecessary overuse of chip channels * Volume models support taken from libADLMIDI has been adapted to OPN2's chip speficis * Fixed inability to play high notes due physical tone frequency out of range on the OPN2 chip * Added support for full-panning stereo option ADL&OPN Hotfix: re-calculated default banks The fix on side of measurer of OPL3-BE and OPN2-BE where some instruments getting zero releasing time.
2018-10-01 21:07:05 +00:00
SetValueForKey("Path", "/usr/share/games/doom/fm_banks", true);
#endif
}
2016-03-01 15:47:10 +00:00
// Add some self-documentation.
SetSectionNote("IWADSearch.Directories",
"# These are the directories to automatically search for IWADs.\n"
"# Each directory should be on a separate line, preceded by Path=\n");
SetSectionNote("FileSearch.Directories",
"# These are the directories to search for wads added with the -file\n"
"# command line parameter, if they cannot be found with the path\n"
"# as-is. Layout is the same as for IWADSearch.Directories\n");
SetSectionNote("SoundfontSearch.Directories",
"# These are the directories to search for soundfonts that let listed in the menu.\n"
"# Layout is the same as for IWADSearch.Directories\n");
2016-03-01 15:47:10 +00:00
}
FGameConfigFile::~FGameConfigFile ()
{
}
void FGameConfigFile::WriteCommentHeader (FileWriter *file) const
2016-03-01 15:47:10 +00:00
{
file->Printf ("# This file was generated by " GAMENAME " %s on %s\n", GetVersionString(), myasctime());
2016-03-01 15:47:10 +00:00
}
void FGameConfigFile::DoAutoloadSetup (FIWadManager *iwad_man)
{
// Create auto-load sections, so users know what's available.
// Note that this totem pole is the reverse of the order that
// they will appear in the file.
double last = 0;
if (SetSection ("LastRun"))
{
const char *lastver = GetValueForKey ("Version");
if (lastver != NULL) last = atof(lastver);
}
if (last < 211)
{
RenameSection("Chex3.Autoload", "chex.chex3.Autoload");
RenameSection("Chex1.Autoload", "chex.chex1.Autoload");
RenameSection("HexenDK.Autoload", "hexen.deathkings.Autoload");
RenameSection("HereticSR.Autoload", "heretic.shadow.Autoload");
RenameSection("FreeDM.Autoload", "doom.freedoom.freedm.Autoload");
RenameSection("Freedoom2.Autoload", "doom.freedoom.phase2.Autoload");
RenameSection("Freedoom1.Autoload", "doom.freedoom.phase1.Autoload");
RenameSection("Freedoom.Autoload", "doom.freedoom.Autoload");
RenameSection("DoomBFG.Autoload", "doom.id.doom1.bfg.Autoload");
RenameSection("DoomU.Autoload", "doom.id.doom1.ultimate.Autoload");
RenameSection("Doom1.Autoload", "doom.id.doom1.registered.Autoload");
RenameSection("TNT.Autoload", "doom.id.doom2.tnt.Autoload");
RenameSection("Plutonia.Autoload", "doom.id.doom2.plutonia.Autoload");
RenameSection("Doom2BFG.Autoload", "doom.id.doom2.bfg.Autoload");
RenameSection("Doom2.Autoload", "doom.id.doom2.commercial.Autoload");
}
else if (last < 218)
{
RenameSection("doom.doom1.bfg.Autoload", "doom.id.doom1.bfg.Autoload");
RenameSection("doom.doom1.ultimate.Autoload", "doom.id.doom1.ultimate.Autoload");
RenameSection("doom.doom1.registered.Autoload", "doom.id.doom1.registered.Autoload");
RenameSection("doom.doom2.tnt.Autoload", "doom.id.doom2.tnt.Autoload");
RenameSection("doom.doom2.plutonia.Autoload", "doom.id.doom2.plutonia.Autoload");
RenameSection("doom.doom2.bfg.Autoload", "doom.id.doom2.bfg.Autoload");
RenameSection("doom.doom2.commercial.Autoload", "doom.id.doom2.commercial.Autoload");
2016-03-01 15:47:10 +00:00
}
const FString *pAuto;
for (int num = 0; (pAuto = iwad_man->GetAutoname(num)) != NULL; num++)
{
if (!(iwad_man->GetIWadFlags(num) & GI_SHAREWARE)) // we do not want autoload sections for shareware IWADs (which may have an autoname for resource filtering)
{
FString workname = *pAuto;
while (workname.IsNotEmpty())
{
FString section = workname + ".Autoload";
CreateSectionAtStart(section.GetChars());
auto dotpos = workname.LastIndexOf('.');
2016-03-01 15:47:10 +00:00
if (dotpos < 0) break;
workname.Truncate(dotpos);
}
}
}
CreateSectionAtStart("Global.Autoload");
// The same goes for auto-exec files.
CreateStandardAutoExec("Chex.AutoExec", true);
CreateStandardAutoExec("Strife.AutoExec", true);
CreateStandardAutoExec("Hexen.AutoExec", true);
CreateStandardAutoExec("Heretic.AutoExec", true);
CreateStandardAutoExec("Doom.AutoExec", true);
// Move search paths back to the top.
MoveSectionToStart("SoundfontSearch.Directories");
2016-03-01 15:47:10 +00:00
MoveSectionToStart("FileSearch.Directories");
MoveSectionToStart("IWADSearch.Directories");
SetSectionNote("Doom.AutoExec",
"# Files to automatically execute when running the corresponding game.\n"
"# Each file should be on its own line, preceded by Path=\n\n");
SetSectionNote("Global.Autoload",
"# WAD files to always load. These are loaded after the IWAD but before\n"
"# any files added with -file. Place each file on its own line, preceded\n"
"# by Path=\n");
SetSectionNote("Doom.Autoload",
"# Wad files to automatically load depending on the game and IWAD you are\n"
"# playing. You may have have files that are loaded for all similar IWADs\n"
"# (the game) and files that are only loaded for particular IWADs. For example,\n"
"# any files listed under 'doom.Autoload' will be loaded for any version of Doom,\n"
"# but files listed under 'doom.doom2.Autoload' will only load when you are\n"
"# playing a Doom 2 based game (doom2.wad, tnt.wad or plutonia.wad), and files listed under\n"
"# 'doom.doom2.commercial.Autoload' only when playing doom2.wad.\n\n");
}
void FGameConfigFile::DoGlobalSetup ()
{
if (SetSection ("GlobalSettings.Unknown"))
{
ReadCVars (CVAR_GLOBALCONFIG);
}
if (SetSection ("GlobalSettings"))
{
ReadCVars (CVAR_GLOBALCONFIG);
}
if (SetSection ("LastRun"))
{
const char *lastver = GetValueForKey ("Version");
if (lastver != NULL)
{
double last = atof (lastver);
if (last < 207)
{ // Now that snd_midiprecache works again, you probably don't want it on.
FBaseCVar *precache = FindCVar ("snd_midiprecache", NULL);
if (precache != NULL)
{
precache->ResetToDefault();
}
}
if (last < 208)
{ // Weapon sections are no longer used, so tidy up the config by deleting them.
const char *name;
size_t namelen;
bool more;
more = SetFirstSection();
while (more)
{
name = GetCurrentSection();
if (name != NULL &&
(namelen = strlen(name)) > 12 &&
strcmp(name + namelen - 12, ".WeaponSlots") == 0)
{
more = DeleteCurrentSection();
}
else
{
more = SetNextSection();
}
}
}
if (last < 209)
{
// menu dimming is now a gameinfo option so switch user override off
FBaseCVar *dim = FindCVar ("dimamount", NULL);
if (dim != NULL)
{
dim->ResetToDefault ();
}
}
if (last < 210)
{
if (SetSection ("Hexen.Bindings"))
{
// These 2 were misnamed in earlier versions
SetValueForKey ("6", "use ArtiPork");
SetValueForKey ("5", "use ArtiInvulnerability2");
}
}
if (last < 213)
{
auto var = FindCVar("snd_channels", NULL);
if (var != NULL)
{
// old settings were default 32, minimum 8, new settings are default 128, minimum 64.
UCVarValue v = var->GetGenericRep(CVAR_Int);
if (v.Int < 64) var->ResetToDefault();
}
}
if (last < 214)
{
FBaseCVar *var = FindCVar("hud_scale", NULL);
if (var != NULL) var->ResetToDefault();
var = FindCVar("st_scale", NULL);
if (var != NULL) var->ResetToDefault();
var = FindCVar("hud_althudscale", NULL);
if (var != NULL) var->ResetToDefault();
2022-06-08 14:41:57 +00:00
var = FindCVar("con_scale", NULL);
if (var != NULL) var->ResetToDefault();
var = FindCVar("con_scaletext", NULL);
if (var != NULL) var->ResetToDefault();
var = FindCVar("uiscale", NULL);
if (var != NULL) var->ResetToDefault();
}
if (last < 215)
{
// Previously a true/false boolean. Now an on/off/auto tri-state with auto as the default.
FBaseCVar *var = FindCVar("snd_hrtf", NULL);
if (var != NULL) var->ResetToDefault();
}
if (last < 216)
{
FBaseCVar *var = FindCVar("gl_texture_hqresize", NULL);
if (var != NULL)
{
auto v = var->GetGenericRep(CVAR_Int);
switch (v.Int)
{
case 1:
gl_texture_hqresizemode = 1; gl_texture_hqresizemult = 2;
break;
case 2:
gl_texture_hqresizemode = 1; gl_texture_hqresizemult = 3;
break;
case 3:
gl_texture_hqresizemode = 1; gl_texture_hqresizemult = 4;
break;
case 4:
gl_texture_hqresizemode = 2; gl_texture_hqresizemult = 2;
break;
case 5:
gl_texture_hqresizemode = 2; gl_texture_hqresizemult = 3;
break;
case 6:
gl_texture_hqresizemode = 2; gl_texture_hqresizemult = 4;
break;
case 7:
gl_texture_hqresizemode = 3; gl_texture_hqresizemult = 2;
break;
case 8:
gl_texture_hqresizemode = 3; gl_texture_hqresizemult = 3;
break;
case 9:
gl_texture_hqresizemode = 3; gl_texture_hqresizemult = 4;
break;
case 10:
gl_texture_hqresizemode = 4; gl_texture_hqresizemult = 2;
break;
case 11:
gl_texture_hqresizemode = 4; gl_texture_hqresizemult = 3;
break;
case 12:
gl_texture_hqresizemode = 4; gl_texture_hqresizemult = 4;
break;
case 18:
gl_texture_hqresizemode = 4; gl_texture_hqresizemult = 5;
break;
case 19:
gl_texture_hqresizemode = 4; gl_texture_hqresizemult = 6;
break;
case 13:
gl_texture_hqresizemode = 5; gl_texture_hqresizemult = 2;
break;
case 14:
gl_texture_hqresizemode = 5; gl_texture_hqresizemult = 3;
break;
case 15:
gl_texture_hqresizemode = 5; gl_texture_hqresizemult = 4;
break;
case 16:
gl_texture_hqresizemode = 5; gl_texture_hqresizemult = 5;
break;
case 17:
gl_texture_hqresizemode = 5; gl_texture_hqresizemult = 6;
break;
case 20:
gl_texture_hqresizemode = 6; gl_texture_hqresizemult = 2;
break;
case 21:
gl_texture_hqresizemode = 6; gl_texture_hqresizemult = 3;
break;
case 22:
gl_texture_hqresizemode = 6; gl_texture_hqresizemult = 4;
break;
case 23:
gl_texture_hqresizemode = 6; gl_texture_hqresizemult = 5;
break;
case 24:
gl_texture_hqresizemode = 6; gl_texture_hqresizemult = 6;
break;
case 0:
default:
gl_texture_hqresizemode = 0; gl_texture_hqresizemult = 1;
break;
}
}
}
if (last < 217)
{
auto var = FindCVar("vid_scalemode", NULL);
UCVarValue newvalue;
if (var != NULL)
{
UCVarValue v = var->GetGenericRep(CVAR_Int);
if (v.Int == 3) // 640x400
{
newvalue.Int = 2;
var->SetGenericRep(newvalue, CVAR_Int);
}
if (v.Int == 2) // 320x200
{
newvalue.Int = 6;
var->SetGenericRep(newvalue, CVAR_Int);
}
}
}
if (last < 219)
{
// 2019-12-06 - polybackend merge
// migrate vid_enablevulkan to vid_preferbackend
auto var = FindCVar("vid_enablevulkan", NULL);
if (var != NULL)
{
UCVarValue v = var->GetGenericRep(CVAR_Int);
vid_preferbackend = v.Int;
}
// 2019-12-31 - r_videoscale.cpp changes
var = FindCVar("vid_scale_customstretched", NULL);
if (var != NULL)
{
UCVarValue v = var->GetGenericRep(CVAR_Bool);
if (v.Bool)
vid_scale_custompixelaspect = 1.2f;
else
vid_scale_custompixelaspect = 1.0f;
}
var = FindCVar("vid_scalemode", NULL);
UCVarValue newvalue;
if (var != NULL)
{
UCVarValue v = var->GetGenericRep(CVAR_Int);
switch (v.Int)
{
case 1:
newvalue.Int = 0;
var->SetGenericRep(newvalue, CVAR_Int);
- fixed most of implicit fallthrough compilation warnings src/common/console/c_console.cpp:1032:4: warning: this statement may fall through [-Wimplicit-fallthrough=] src/common/console/c_console.cpp:958:4: warning: this statement may fall through [-Wimplicit-fallthrough=] src/common/scripting/backend/codegen.cpp:2969:4: warning: this statement may fall through [-Wimplicit-fallthrough=] src/common/scripting/frontend/zcc_compile.cpp:2656:4: warning: this statement may fall through [-Wimplicit-fallthrough=] src/common/scripting/frontend/zcc_compile.cpp:521:5: warning: this statement may fall through [-Wimplicit-fallthrough=] src/common/scripting/jit/jit_math.cpp:966:19: warning: this statement may fall through [-Wimplicit-fallthrough=] src/d_main.cpp:1538:3: warning: this statement may fall through [-Wimplicit-fallthrough=] src/d_main.cpp:1549:3: warning: this statement may fall through [-Wimplicit-fallthrough=] src/d_main.cpp:3820:3: warning: this statement may fall through [-Wimplicit-fallthrough=] src/gameconfigfile.cpp:544:25: warning: this statement may fall through [-Wimplicit-fallthrough=] src/gamedata/p_xlat.cpp:193:11: warning: this statement may fall through [-Wimplicit-fallthrough=] src/gamedata/p_xlat.cpp:200:11: warning: this statement may fall through [-Wimplicit-fallthrough=] src/gamedata/p_xlat.cpp:210:11: warning: this statement may fall through [-Wimplicit-fallthrough=] src/g_game.cpp:1145:20: warning: this statement may fall through [-Wimplicit-fallthrough=] src/maploader/maploader.cpp:2142:3: warning: this statement may fall through [-Wimplicit-fallthrough=] src/menu/doommenu.cpp:159:28: warning: this statement may fall through [-Wimplicit-fallthrough=] src/m_cheat.cpp:109:3: warning: this statement may fall through [-Wimplicit-fallthrough=] src/playsim/mapthinkers/a_ceiling.cpp:254:24: warning: this statement may fall through [-Wimplicit-fallthrough=] src/playsim/mapthinkers/a_floor.cpp:322:18: warning: this statement may fall through [-Wimplicit-fallthrough=] src/playsim/mapthinkers/a_floor.cpp:330:18: warning: this statement may fall through [-Wimplicit-fallthrough=] src/playsim/mapthinkers/a_floor.cpp:344:10: warning: this statement may fall through [-Wimplicit-fallthrough=] src/playsim/mapthinkers/a_plats.cpp:129:47: warning: this statement may fall through [-Wimplicit-fallthrough=] src/playsim/mapthinkers/a_plats.cpp:284:8: warning: this statement may fall through [-Wimplicit-fallthrough=] src/playsim/p_acs.cpp:6302:18: warning: this statement may fall through [-Wimplicit-fallthrough=] src/playsim/p_acs.cpp:8111:16: warning: this statement may fall through [-Wimplicit-fallthrough=] src/playsim/p_spec.cpp:344:6: warning: this statement may fall through [-Wimplicit-fallthrough=] src/scripting/decorate/thingdef_parse.cpp:1343:9: warning: this statement may fall through [-Wimplicit-fallthrough=] src/scripting/zscript/zcc_compile_doom.cpp:298:12: warning: this statement may fall through [-Wimplicit-fallthrough=] src/wi_stuff.cpp:463:14: warning: this statement may fall through [-Wimplicit-fallthrough=]
2020-10-31 11:22:13 +00:00
[[fallthrough]];
case 3:
case 4:
vid_scale_linear = true;
break;
default:
vid_scale_linear = false;
break;
}
}
}
if (last < 220)
{
auto var = FindCVar("Gamma", NULL);
if (var != NULL)
{
UCVarValue v = var->GetGenericRep(CVAR_Float);
vid_gamma = v.Float;
}
var = FindCVar("fullscreen", NULL);
if (var != NULL)
{
UCVarValue v = var->GetGenericRep(CVAR_Bool);
vid_fullscreen = v.Float;
}
}
if (last < 221)
{
// Transfer the messed up mouse scaling config to something sane and consistent.
#ifndef _WIN32
double xfact = 3, yfact = 2;
#else
double xfact = in_mouse == 1? 1.5 : 4, yfact = 1;
#endif
auto var = FindCVar("m_noprescale", NULL);
if (var != NULL)
{
UCVarValue v = var->GetGenericRep(CVAR_Bool);
if (v.Bool) xfact = yfact = 1;
}
var = FindCVar("mouse_sensitivity", NULL);
if (var != NULL)
{
UCVarValue v = var->GetGenericRep(CVAR_Float);
xfact *= v.Float;
yfact *= v.Float;
}
m_sensitivity_x = (float)xfact;
m_sensitivity_y = (float)yfact;
adl_volume_model = 0;
// if user originally wanted the in-game textures resized, set model skins to resize too
int old_targets = gl_texture_hqresize_targets;
old_targets |= (old_targets & 1) ? 8 : 0;
gl_texture_hqresize_targets = old_targets;
}
if (last < 222)
{
auto var = FindCVar("mod_dumb_mastervolume", NULL);
if (var != NULL)
{
UCVarValue v = var->GetGenericRep(CVAR_Float);
v.Float /= 4.f;
if (v.Float < 1.f) v.Float = 1.f;
}
}
2016-03-01 15:47:10 +00:00
}
}
}
void FGameConfigFile::DoGameSetup (const char *gamename)
{
const char *key;
const char *value;
sublen = countof(section) - 1 - mysnprintf (section, countof(section), "%s.", gamename);
subsection = section + countof(section) - sublen - 1;
section[countof(section) - 1] = '\0';
strncpy (subsection, "UnknownConsoleVariables", sublen);
if (SetSection (section))
{
ReadCVars (0);
}
strncpy (subsection, "ConfigOnlyVariables", sublen);
if (SetSection (section))
{
ReadCVars (0);
}
2016-03-01 15:47:10 +00:00
strncpy (subsection, "ConsoleVariables", sublen);
if (SetSection (section))
{
ReadCVars (0);
}
if (gameinfo.gametype & GAME_Raven)
{
SetRavenDefaults (gameinfo.gametype == GAME_Hexen);
}
if (gameinfo.gametype & GAME_Strife)
{
SetStrifeDefaults ();
}
2016-03-01 15:47:10 +00:00
// The NetServerInfo section will be read and override anything loaded
// here when it's determined that a netgame is being played.
strncpy (subsection, "LocalServerInfo", sublen);
if (SetSection (section))
{
ReadCVars (0);
}
strncpy (subsection, "Player", sublen);
if (SetSection (section))
{
ReadCVars (0);
}
strncpy (subsection, "ConsoleAliases", sublen);
if (SetSection (section))
{
const char *name = NULL;
while (NextInSection (key, value))
{
if (stricmp (key, "Name") == 0)
{
name = value;
}
else if (stricmp (key, "Command") == 0 && name != NULL)
{
C_SetAlias (name, value);
name = NULL;
}
}
}
}
// Moved from DoGameSetup so that it can happen after wads are loaded
void FGameConfigFile::DoKeySetup(const char *gamename)
{
static const struct { const char *label; FKeyBindings *bindings; } binders[] =
{
{ "Bindings", &Bindings },
{ "DoubleBindings", &DoubleBindings },
{ "AutomapBindings", &AutomapBindings },
{ NULL, NULL }
};
const char *key, *value;
sublen = countof(section) - 1 - mysnprintf(section, countof(section), "%s.", gamename);
subsection = section + countof(section) - sublen - 1;
section[countof(section) - 1] = '\0';
C_SetDefaultBindings ();
for (int i = 0; binders[i].label != NULL; ++i)
{
strncpy(subsection, binders[i].label, sublen);
if (SetSection(section))
{
FKeyBindings *bindings = binders[i].bindings;
bindings->UnbindAll();
while (NextInSection(key, value))
{
bindings->DoBind(key, value);
}
}
}
OkayToWrite = true;
2016-03-01 15:47:10 +00:00
}
// Like DoGameSetup(), but for mod-specific cvars.
// Called after CVARINFO has been parsed.
void FGameConfigFile::DoModSetup(const char *gamename)
{
mysnprintf(section, countof(section), "%s.Player.Mod", gamename);
if (SetSection(section))
{
ReadCVars(CVAR_MOD|CVAR_USERINFO|CVAR_IGNORE);
}
mysnprintf(section, countof(section), "%s.LocalServerInfo.Mod", gamename);
if (SetSection (section))
{
ReadCVars (CVAR_MOD|CVAR_SERVERINFO|CVAR_IGNORE);
}
mysnprintf(section, countof(section), "%s.ConfigOnlyVariables.Mod", gamename);
if (SetSection (section))
{
ReadCVars (CVAR_MOD|CVAR_CONFIG_ONLY|CVAR_IGNORE);
}
2016-03-01 15:47:10 +00:00
// Signal that these sections should be rewritten when saving the config.
bModSetup = true;
}
void FGameConfigFile::ReadNetVars ()
{
strncpy (subsection, "NetServerInfo", sublen);
if (SetSection (section))
{
ReadCVars (0);
}
if (bModSetup)
{
mysnprintf(subsection, sublen, "NetServerInfo.Mod");
if (SetSection(section))
{
ReadCVars(CVAR_MOD|CVAR_SERVERINFO|CVAR_IGNORE);
}
}
}
// Read cvars from a cvar section of the ini. Flags are the flags to give
// to newly-created cvars that were not already defined.
2017-03-08 17:47:52 +00:00
void FGameConfigFile::ReadCVars (uint32_t flags)
2016-03-01 15:47:10 +00:00
{
const char *key, *value;
FBaseCVar *cvar;
UCVarValue val;
flags |= CVAR_ARCHIVE|CVAR_UNSETTABLE|CVAR_AUTO;
while (NextInSection (key, value))
{
cvar = FindCVar (key, NULL);
if (cvar == NULL)
{
cvar = new FStringCVar (key, NULL, flags);
}
val.String = const_cast<char *>(value);
cvar->SetGenericRep (val, CVAR_String);
}
}
void FGameConfigFile::ArchiveGameData (const char *gamename)
{
char section[32*3], *subsection;
sublen = countof(section) - 1 - mysnprintf (section, countof(section), "%s.", gamename);
subsection = section + countof(section) - 1 - sublen;
strncpy (subsection, "Player", sublen);
SetSection (section, true);
ClearCurrentSection ();
C_ArchiveCVars (this, CVAR_ARCHIVE|CVAR_USERINFO);
if (bModSetup)
{
strncpy (subsection + 6, ".Mod", sublen - 6);
SetSection (section, true);
ClearCurrentSection ();
C_ArchiveCVars (this, CVAR_MOD|CVAR_ARCHIVE|CVAR_AUTO|CVAR_USERINFO);
}
strncpy (subsection, "ConsoleVariables", sublen);
SetSection (section, true);
ClearCurrentSection ();
C_ArchiveCVars (this, CVAR_ARCHIVE);
// Do not overwrite the serverinfo section if playing a netgame, and
// this machine was not the initial host.
if (!netgame || consoleplayer == 0)
{
strncpy (subsection, netgame ? "NetServerInfo" : "LocalServerInfo", sublen);
SetSection (section, true);
ClearCurrentSection ();
C_ArchiveCVars (this, CVAR_ARCHIVE|CVAR_SERVERINFO);
if (bModSetup)
{
strncpy (subsection, netgame ? "NetServerInfo.Mod" : "LocalServerInfo.Mod", sublen);
SetSection (section, true);
ClearCurrentSection ();
C_ArchiveCVars (this, CVAR_MOD|CVAR_ARCHIVE|CVAR_AUTO|CVAR_SERVERINFO);
}
}
strncpy (subsection, "ConfigOnlyVariables", sublen);
SetSection (section, true);
ClearCurrentSection ();
C_ArchiveCVars (this, CVAR_ARCHIVE|CVAR_AUTO|CVAR_CONFIG_ONLY);
if (bModSetup)
{
strncpy (subsection, "ConfigOnlyVariables.Mod", sublen);
SetSection (section, true);
ClearCurrentSection ();
C_ArchiveCVars (this, CVAR_ARCHIVE|CVAR_AUTO|CVAR_MOD|CVAR_CONFIG_ONLY);
}
2016-03-01 15:47:10 +00:00
strncpy (subsection, "UnknownConsoleVariables", sublen);
SetSection (section, true);
ClearCurrentSection ();
C_ArchiveCVars (this, CVAR_ARCHIVE|CVAR_AUTO);
strncpy (subsection, "ConsoleAliases", sublen);
SetSection (section, true);
ClearCurrentSection ();
C_ArchiveAliases (this);
M_SaveCustomKeys (this, section, subsection, sublen);
strcpy (subsection, "Bindings");
SetSection (section, true);
Bindings.ArchiveBindings (this);
strncpy (subsection, "DoubleBindings", sublen);
SetSection (section, true);
DoubleBindings.ArchiveBindings (this);
strncpy (subsection, "AutomapBindings", sublen);
SetSection (section, true);
AutomapBindings.ArchiveBindings (this);
}
void FGameConfigFile::ArchiveGlobalData ()
{
SetSection ("LastRun", true);
ClearCurrentSection ();
SetValueForKey ("Version", LASTRUNVERSION);
SetSection ("GlobalSettings", true);
ClearCurrentSection ();
C_ArchiveCVars (this, CVAR_ARCHIVE|CVAR_GLOBALCONFIG);
SetSection ("GlobalSettings.Unknown", true);
ClearCurrentSection ();
C_ArchiveCVars (this, CVAR_ARCHIVE|CVAR_GLOBALCONFIG|CVAR_AUTO);
}
FString FGameConfigFile::GetConfigPath (bool tryProg)
{
const char *pathval;
pathval = Args->CheckValue ("-config");
if (pathval != NULL)
{
return FString(pathval);
}
return M_GetConfigPath(tryProg);
}
void FGameConfigFile::CreateStandardAutoExec(const char *section, bool start)
{
if (!SetSection(section))
{
FString path = M_GetAutoexecPath();
SetSection (section, true);
SetValueForKey ("Path", path.GetChars());
}
if (start)
{
MoveSectionToStart(section);
}
}
void FGameConfigFile::AddAutoexec (FArgs *list, const char *game)
2016-03-01 15:47:10 +00:00
{
char section[64];
const char *key;
const char *value;
mysnprintf (section, countof(section), "%s.AutoExec", game);
// If <game>.AutoExec section does not exist, create it
// with a default autoexec.cfg file present.
CreateStandardAutoExec(section, false);
// Run any files listed in the <game>.AutoExec section
if (!SectionIsEmpty())
{
while (NextInSection (key, value))
{
if (stricmp (key, "Path") == 0 && *value != '\0')
{
FString expanded_path = ExpandEnvVars(value);
if (FileExists(expanded_path))
{
list->AppendArg (ExpandEnvVars(value));
}
}
}
}
}
void FGameConfigFile::SetRavenDefaults (bool isHexen)
{
UCVarValue val;
val.Bool = false;
wi_percents.SetGenericRepDefault (val, CVAR_Bool);
val.Bool = true;
con_centernotify.SetGenericRepDefault (val, CVAR_Bool);
snd_pitched.SetGenericRepDefault (val, CVAR_Bool);
val.Int = 9;
msg0color.SetGenericRepDefault (val, CVAR_Int);
val.Int = CR_WHITE;
msgmidcolor.SetGenericRepDefault (val, CVAR_Int);
val.Int = CR_YELLOW;
msgmidcolor2.SetGenericRepDefault (val, CVAR_Int);
val.Int = 0x543b17;
am_wallcolor.SetGenericRepDefault (val, CVAR_Int);
val.Int = 0xd0b085;
am_fdwallcolor.SetGenericRepDefault (val, CVAR_Int);
val.Int = 0x734323;
am_cdwallcolor.SetGenericRepDefault (val, CVAR_Int);
val.Int = 0;
wipetype.SetGenericRepDefault(val, CVAR_Int);
2016-03-01 15:47:10 +00:00
// Fix the Heretic/Hexen automap colors so they are correct.
// (They were wrong on older versions.)
if (*am_wallcolor == 0x2c1808 && *am_fdwallcolor == 0x887058 && *am_cdwallcolor == 0x4c3820)
{
am_wallcolor.ResetToDefault ();
am_fdwallcolor.ResetToDefault ();
am_cdwallcolor.ResetToDefault ();
}
if (!isHexen)
{
val.Int = 0x3f6040;
color.SetGenericRepDefault (val, CVAR_Int);
}
}
void FGameConfigFile::SetStrifeDefaults ()
{
UCVarValue val;
val.Int = 3;
wipetype.SetGenericRepDefault(val, CVAR_Int);
}
2016-03-01 15:47:10 +00:00
CCMD (whereisini)
{
FString path = M_GetConfigPath(false);
Printf ("%s\n", path.GetChars());
}