/*
* jdhuff.c
*
* Copyright (C) 1991-1997, Thomas G. Lane.
* This file is part of the Independent JPEG Group's software.
* For conditions of distribution and use, see the accompanying README file.
*
* This file contains Huffman entropy decoding routines.
*
* Much of the complexity here has to do with supporting input suspension.
* If the data source module demands suspension, we want to be able to back
* up to the start of the current MCU.  To do this, we copy state variables
* into local working storage, and update them back to the permanent
* storage only upon successful completion of an MCU.
*/

#define JPEG_INTERNALS
#include "jinclude.h"
#include "jpeglib.h"
#include "jdhuff.h"		/* Declarations shared with jdphuff.c */


/*
* Expanded entropy decoder object for Huffman decoding.
*
* The savable_state subrecord contains fields that change within an MCU,
* but must not be updated permanently until we complete the MCU.
*/

typedef struct {
	int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */
} savable_state;

/* This macro is to work around compilers with missing or broken
* structure assignment.  You'll need to fix this code if you have
* such a compiler and you change MAX_COMPS_IN_SCAN.
*/

#ifndef NO_STRUCT_ASSIGN
#define ASSIGN_STATE(dest,src)  ((dest) = (src))
#else
#if MAX_COMPS_IN_SCAN == 4
#define ASSIGN_STATE(dest,src)  \
	((dest).last_dc_val[0] = (src).last_dc_val[0], \
	(dest).last_dc_val[1] = (src).last_dc_val[1], \
	(dest).last_dc_val[2] = (src).last_dc_val[2], \
	(dest).last_dc_val[3] = (src).last_dc_val[3])
#endif
#endif


typedef struct {
	struct jpeg_entropy_decoder pub; /* public fields */

	/* These fields are loaded into local variables at start of each MCU.
	* In case of suspension, we exit WITHOUT updating them.
	*/
	bitread_perm_state bitstate;	/* Bit buffer at start of MCU */
	savable_state saved;		/* Other state at start of MCU */

	/* These fields are NOT loaded into local working state. */
	unsigned int restarts_to_go;	/* MCUs left in this restart interval */

	/* Pointers to derived tables (these workspaces have image lifespan) */
	d_derived_tbl * dc_derived_tbls[NUM_HUFF_TBLS];
	d_derived_tbl * ac_derived_tbls[NUM_HUFF_TBLS];

	/* Precalculated info set up by start_pass for use in decode_mcu: */

	/* Pointers to derived tables to be used for each block within an MCU */
	d_derived_tbl * dc_cur_tbls[D_MAX_BLOCKS_IN_MCU];
	d_derived_tbl * ac_cur_tbls[D_MAX_BLOCKS_IN_MCU];
	/* Whether we care about the DC and AC coefficient values for each block */
	boolean dc_needed[D_MAX_BLOCKS_IN_MCU];
	boolean ac_needed[D_MAX_BLOCKS_IN_MCU];
} huff_entropy_decoder;

typedef huff_entropy_decoder * huff_entropy_ptr;


/*
* Initialize for a Huffman-compressed scan.
*/

METHODDEF(void)
start_pass_huff_decoder (j_decompress_ptr cinfo)
{
	huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
	int ci, blkn, dctbl, actbl;
	jpeg_component_info * compptr;

	/* Check that the scan parameters Ss, Se, Ah/Al are OK for sequential JPEG.
	* This ought to be an error condition, but we make it a warning because
	* there are some baseline files out there with all zeroes in these bytes.
	*/
	if (cinfo->Ss != 0 || cinfo->Se != DCTSIZE2-1 ||
		cinfo->Ah != 0 || cinfo->Al != 0)
		WARNMS(cinfo, JWRN_NOT_SEQUENTIAL);

	for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
		compptr = cinfo->cur_comp_info[ci];
		dctbl = compptr->dc_tbl_no;
		actbl = compptr->ac_tbl_no;
		/* Compute derived values for Huffman tables */
		/* We may do this more than once for a table, but it's not expensive */
		jpeg_make_d_derived_tbl(cinfo, TRUE, dctbl,
			& entropy->dc_derived_tbls[dctbl]);
		jpeg_make_d_derived_tbl(cinfo, FALSE, actbl,
			& entropy->ac_derived_tbls[actbl]);
		/* Initialize DC predictions to 0 */
		entropy->saved.last_dc_val[ci] = 0;
	}

	/* Precalculate decoding info for each block in an MCU of this scan */
	for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
		ci = cinfo->MCU_membership[blkn];
		compptr = cinfo->cur_comp_info[ci];
		/* Precalculate which table to use for each block */
		entropy->dc_cur_tbls[blkn] = entropy->dc_derived_tbls[compptr->dc_tbl_no];
		entropy->ac_cur_tbls[blkn] = entropy->ac_derived_tbls[compptr->ac_tbl_no];
		/* Decide whether we really care about the coefficient values */
		if (compptr->component_needed) {
			entropy->dc_needed[blkn] = TRUE;
			/* we don't need the ACs if producing a 1/8th-size image */
			entropy->ac_needed[blkn] = (compptr->DCT_scaled_size > 1);
		} else {
			entropy->dc_needed[blkn] = entropy->ac_needed[blkn] = FALSE;
		}
	}

	/* Initialize bitread state variables */
	entropy->bitstate.bits_left = 0;
	entropy->bitstate.get_buffer = 0; /* unnecessary, but keeps Purify quiet */
	entropy->pub.insufficient_data = FALSE;

	/* Initialize restart counter */
	entropy->restarts_to_go = cinfo->restart_interval;
}


/*
* Compute the derived values for a Huffman table.
* This routine also performs some validation checks on the table.
*
* Note this is also used by jdphuff.c.
*/

GLOBAL(void)
jpeg_make_d_derived_tbl (j_decompress_ptr cinfo, boolean isDC, int tblno,
						 d_derived_tbl ** pdtbl)
{
	JHUFF_TBL *htbl;
	d_derived_tbl *dtbl;
	int p, i, l, si, numsymbols;
	int lookbits, ctr;
	char huffsize[257];
	unsigned int huffcode[257];
	unsigned int code;

	/* Note that huffsize[] and huffcode[] are filled in code-length order,
	* paralleling the order of the symbols themselves in htbl->huffval[].
	*/

	/* Find the input Huffman table */
	if (tblno < 0 || tblno >= NUM_HUFF_TBLS)
		ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno);
	htbl =
		isDC ? cinfo->dc_huff_tbl_ptrs[tblno] : cinfo->ac_huff_tbl_ptrs[tblno];
	if (htbl == NULL)
		ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno);

	/* Allocate a workspace if we haven't already done so. */
	if (*pdtbl == NULL)
		*pdtbl = (d_derived_tbl *)
		(*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
		SIZEOF(d_derived_tbl));
	dtbl = *pdtbl;
	dtbl->pub = htbl;		/* fill in back link */

	/* Figure C.1: make table of Huffman code length for each symbol */

	p = 0;
	for (l = 1; l <= 16; l++) {
		i = (int) htbl->bits[l];
		if (i < 0 || p + i > 256)	/* protect against table overrun */
			ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
		while (i--)
			huffsize[p++] = (char) l;
	}
	huffsize[p] = 0;
	numsymbols = p;

	/* Figure C.2: generate the codes themselves */
	/* We also validate that the counts represent a legal Huffman code tree. */

	code = 0;
	si = huffsize[0];
	p = 0;
	while (huffsize[p]) {
		while (((int) huffsize[p]) == si) {
			huffcode[p++] = code;
			code++;
		}
		/* code is now 1 more than the last code used for codelength si; but
		* it must still fit in si bits, since no code is allowed to be all ones.
		*/
		if (((INT32) code) >= (((INT32) 1) << si))
			ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
		code <<= 1;
		si++;
	}

	/* Figure F.15: generate decoding tables for bit-sequential decoding */

	p = 0;
	for (l = 1; l <= 16; l++) {
		if (htbl->bits[l]) {
			/* valoffset[l] = huffval[] index of 1st symbol of code length l,
			* minus the minimum code of length l
			*/
			dtbl->valoffset[l] = (INT32) p - (INT32) huffcode[p];
			p += htbl->bits[l];
			dtbl->maxcode[l] = huffcode[p-1]; /* maximum code of length l */
		} else {
			dtbl->maxcode[l] = -1;	/* -1 if no codes of this length */
		}
	}
	dtbl->maxcode[17] = 0xFFFFFL; /* ensures jpeg_huff_decode terminates */

	/* Compute lookahead tables to speed up decoding.
	* First we set all the table entries to 0, indicating "too long";
	* then we iterate through the Huffman codes that are short enough and
	* fill in all the entries that correspond to bit sequences starting
	* with that code.
	*/

	MEMZERO(dtbl->look_nbits, SIZEOF(dtbl->look_nbits));

	p = 0;
	for (l = 1; l <= HUFF_LOOKAHEAD; l++) {
		for (i = 1; i <= (int) htbl->bits[l]; i++, p++) {
			/* l = current code's length, p = its index in huffcode[] & huffval[]. */
			/* Generate left-justified code followed by all possible bit sequences */
			lookbits = huffcode[p] << (HUFF_LOOKAHEAD-l);
			for (ctr = 1 << (HUFF_LOOKAHEAD-l); ctr > 0; ctr--) {
				dtbl->look_nbits[lookbits] = l;
				dtbl->look_sym[lookbits] = htbl->huffval[p];
				lookbits++;
			}
		}
	}

	/* Validate symbols as being reasonable.
	* For AC tables, we make no check, but accept all byte values 0..255.
	* For DC tables, we require the symbols to be in range 0..15.
	* (Tighter bounds could be applied depending on the data depth and mode,
	* but this is sufficient to ensure safe decoding.)
	*/
	if (isDC) {
		for (i = 0; i < numsymbols; i++) {
			int sym = htbl->huffval[i];
			if (sym < 0 || sym > 15)
				ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
		}
	}
}


/*
* Out-of-line code for bit fetching (shared with jdphuff.c).
* See jdhuff.h for info about usage.
* Note: current values of get_buffer and bits_left are passed as parameters,
* but are returned in the corresponding fields of the state struct.
*
* On most machines MIN_GET_BITS should be 25 to allow the full 32-bit width
* of get_buffer to be used.  (On machines with wider words, an even larger
* buffer could be used.)  However, on some machines 32-bit shifts are
* quite slow and take time proportional to the number of places shifted.
* (This is true with most PC compilers, for instance.)  In this case it may
* be a win to set MIN_GET_BITS to the minimum value of 15.  This reduces the
* average shift distance at the cost of more calls to jpeg_fill_bit_buffer.
*/

#ifdef SLOW_SHIFT_32
#define MIN_GET_BITS  15	/* minimum allowable value */
#else
#define MIN_GET_BITS  (BIT_BUF_SIZE-7)
#endif


GLOBAL(boolean)
jpeg_fill_bit_buffer (bitread_working_state * state,
					  register bit_buf_type get_buffer, register int bits_left,
					  int nbits)
					  /* Load up the bit buffer to a depth of at least nbits */
{
	/* Copy heavily used state fields into locals (hopefully registers) */
	register const JOCTET * next_input_byte = state->next_input_byte;
	register size_t bytes_in_buffer = state->bytes_in_buffer;
	j_decompress_ptr cinfo = state->cinfo;

	/* Attempt to load at least MIN_GET_BITS bits into get_buffer. */
	/* (It is assumed that no request will be for more than that many bits.) */
	/* We fail to do so only if we hit a marker or are forced to suspend. */

	if (cinfo->unread_marker == 0) {	/* cannot advance past a marker */
		while (bits_left < MIN_GET_BITS) {
			register int c;

			/* Attempt to read a byte */
			if (bytes_in_buffer == 0) {
				if (! (*cinfo->src->fill_input_buffer) (cinfo))
					return FALSE;
				next_input_byte = cinfo->src->next_input_byte;
				bytes_in_buffer = cinfo->src->bytes_in_buffer;
			}
			bytes_in_buffer--;
			c = GETJOCTET(*next_input_byte++);

			/* If it's 0xFF, check and discard stuffed zero byte */
			if (c == 0xFF) {
				/* Loop here to discard any padding FF's on terminating marker,
				* so that we can save a valid unread_marker value.  NOTE: we will
				* accept multiple FF's followed by a 0 as meaning a single FF data
				* byte.  This data pattern is not valid according to the standard.
				*/
				do {
					if (bytes_in_buffer == 0) {
						if (! (*cinfo->src->fill_input_buffer) (cinfo))
							return FALSE;
						next_input_byte = cinfo->src->next_input_byte;
						bytes_in_buffer = cinfo->src->bytes_in_buffer;
					}
					bytes_in_buffer--;
					c = GETJOCTET(*next_input_byte++);
				} while (c == 0xFF);

				if (c == 0) {
					/* Found FF/00, which represents an FF data byte */
					c = 0xFF;
				} else {
					/* Oops, it's actually a marker indicating end of compressed data.
					* Save the marker code for later use.
					* Fine point: it might appear that we should save the marker into
					* bitread working state, not straight into permanent state.  But
					* once we have hit a marker, we cannot need to suspend within the
					* current MCU, because we will read no more bytes from the data
					* source.  So it is OK to update permanent state right away.
					*/
					cinfo->unread_marker = c;
					/* See if we need to insert some fake zero bits. */
					goto no_more_bytes;
				}
			}

			/* OK, load c into get_buffer */
			get_buffer = (get_buffer << 8) | c;
			bits_left += 8;
		} /* end while */
	} else {
no_more_bytes:
		/* We get here if we've read the marker that terminates the compressed
		* data segment.  There should be enough bits in the buffer register
		* to satisfy the request; if so, no problem.
		*/
		if (nbits > bits_left) {
			/* Uh-oh.  Report corrupted data to user and stuff zeroes into
			* the data stream, so that we can produce some kind of image.
			* We use a nonvolatile flag to ensure that only one warning message
			* appears per data segment.
			*/
			if (! cinfo->entropy->insufficient_data) {
				WARNMS(cinfo, JWRN_HIT_MARKER);
				cinfo->entropy->insufficient_data = TRUE;
			}
			/* Fill the buffer with zero bits */
			get_buffer <<= MIN_GET_BITS - bits_left;
			bits_left = MIN_GET_BITS;
		}
	}

	/* Unload the local registers */
	state->next_input_byte = next_input_byte;
	state->bytes_in_buffer = bytes_in_buffer;
	state->get_buffer = get_buffer;
	state->bits_left = bits_left;

	return TRUE;
}


/*
* Out-of-line code for Huffman code decoding.
* See jdhuff.h for info about usage.
*/

GLOBAL(int)
jpeg_huff_decode (bitread_working_state * state,
				  register bit_buf_type get_buffer, register int bits_left,
				  d_derived_tbl * htbl, int min_bits)
{
	register int l = min_bits;
	register INT32 code;

	/* HUFF_DECODE has determined that the code is at least min_bits */
	/* bits long, so fetch that many bits in one swoop. */

	CHECK_BIT_BUFFER(*state, l, return -1);
	code = GET_BITS(l);

	/* Collect the rest of the Huffman code one bit at a time. */
	/* This is per Figure F.16 in the JPEG spec. */

	while (code > htbl->maxcode[l]) {
		code <<= 1;
		CHECK_BIT_BUFFER(*state, 1, return -1);
		code |= GET_BITS(1);
		l++;
	}

	/* Unload the local registers */
	state->get_buffer = get_buffer;
	state->bits_left = bits_left;

	/* With garbage input we may reach the sentinel value l = 17. */

	if (l > 16) {
		WARNMS(state->cinfo, JWRN_HUFF_BAD_CODE);
		return 0;			/* fake a zero as the safest result */
	}

	return htbl->pub->huffval[ (int) (code + htbl->valoffset[l]) ];
}


/*
* Figure F.12: extend sign bit.
* On some machines, a shift and add will be faster than a table lookup.
*/

#ifdef AVOID_TABLES

#define HUFF_EXTEND(x,s)  ((x) < (1<<((s)-1)) ? (x) + (((-1)<<(s)) + 1) : (x))

#else

#define HUFF_EXTEND(x,s)  ((x) < extend_test[s] ? (x) + extend_offset[s] : (x))

static const int extend_test[16] =   /* entry n is 2**(n-1) */
{ 0, 0x0001, 0x0002, 0x0004, 0x0008, 0x0010, 0x0020, 0x0040, 0x0080,
0x0100, 0x0200, 0x0400, 0x0800, 0x1000, 0x2000, 0x4000 };

static const int extend_offset[16] = /* entry n is (-1 << n) + 1 */
{ 0, ((-1)<<1) + 1, ((-1)<<2) + 1, ((-1)<<3) + 1, ((-1)<<4) + 1,
((-1)<<5) + 1, ((-1)<<6) + 1, ((-1)<<7) + 1, ((-1)<<8) + 1,
((-1)<<9) + 1, ((-1)<<10) + 1, ((-1)<<11) + 1, ((-1)<<12) + 1,
((-1)<<13) + 1, ((-1)<<14) + 1, ((-1)<<15) + 1 };

#endif /* AVOID_TABLES */


/*
* Check for a restart marker & resynchronize decoder.
* Returns FALSE if must suspend.
*/

LOCAL(boolean)
process_restart (j_decompress_ptr cinfo)
{
	huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
	int ci;

	/* Throw away any unused bits remaining in bit buffer; */
	/* include any full bytes in next_marker's count of discarded bytes */
	cinfo->marker->discarded_bytes += entropy->bitstate.bits_left / 8;
	entropy->bitstate.bits_left = 0;

	/* Advance past the RSTn marker */
	if (! (*cinfo->marker->read_restart_marker) (cinfo))
		return FALSE;

	/* Re-initialize DC predictions to 0 */
	for (ci = 0; ci < cinfo->comps_in_scan; ci++)
		entropy->saved.last_dc_val[ci] = 0;

	/* Reset restart counter */
	entropy->restarts_to_go = cinfo->restart_interval;

	/* Reset out-of-data flag, unless read_restart_marker left us smack up
	* against a marker.  In that case we will end up treating the next data
	* segment as empty, and we can avoid producing bogus output pixels by
	* leaving the flag set.
	*/
	if (cinfo->unread_marker == 0)
		entropy->pub.insufficient_data = FALSE;

	return TRUE;
}


/*
* Decode and return one MCU's worth of Huffman-compressed coefficients.
* The coefficients are reordered from zigzag order into natural array order,
* but are not dequantized.
*
* The i'th block of the MCU is stored into the block pointed to by
* MCU_data[i].  WE ASSUME THIS AREA HAS BEEN ZEROED BY THE CALLER.
* (Wholesale zeroing is usually a little faster than retail...)
*
* Returns FALSE if data source requested suspension.  In that case no
* changes have been made to permanent state.  (Exception: some output
* coefficients may already have been assigned.  This is harmless for
* this module, since we'll just re-assign them on the next call.)
*/

METHODDEF(boolean)
decode_mcu (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
{
	huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
	int blkn;
	BITREAD_STATE_VARS;
	savable_state state;

	/* Process restart marker if needed; may have to suspend */
	if (cinfo->restart_interval) {
		if (entropy->restarts_to_go == 0)
			if (! process_restart(cinfo))
				return FALSE;
	}

	/* If we've run out of data, just leave the MCU set to zeroes.
	* This way, we return uniform gray for the remainder of the segment.
	*/
	if (! entropy->pub.insufficient_data) {

		/* Load up working state */
		BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
		ASSIGN_STATE(state, entropy->saved);

		/* Outer loop handles each block in the MCU */

		for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
			JBLOCKROW block = MCU_data[blkn];
			d_derived_tbl * dctbl = entropy->dc_cur_tbls[blkn];
			d_derived_tbl * actbl = entropy->ac_cur_tbls[blkn];
			register int s, k, r;

			/* Decode a single block's worth of coefficients */

			/* Section F.2.2.1: decode the DC coefficient difference */
			HUFF_DECODE(s, br_state, dctbl, return FALSE, label1);
			if (s) {
				CHECK_BIT_BUFFER(br_state, s, return FALSE);
				r = GET_BITS(s);
				s = HUFF_EXTEND(r, s);
			}

			if (entropy->dc_needed[blkn]) {
				/* Convert DC difference to actual value, update last_dc_val */
				int ci = cinfo->MCU_membership[blkn];
				s += state.last_dc_val[ci];
				state.last_dc_val[ci] = s;
				/* Output the DC coefficient (assumes jpeg_natural_order[0] = 0) */
				(*block)[0] = (JCOEF) s;
			}

			if (entropy->ac_needed[blkn]) {

				/* Section F.2.2.2: decode the AC coefficients */
				/* Since zeroes are skipped, output area must be cleared beforehand */
				for (k = 1; k < DCTSIZE2; k++) {
					HUFF_DECODE(s, br_state, actbl, return FALSE, label2);

					r = s >> 4;
					s &= 15;

					if (s) {
						k += r;
						CHECK_BIT_BUFFER(br_state, s, return FALSE);
						r = GET_BITS(s);
						s = HUFF_EXTEND(r, s);
						/* Output coefficient in natural (dezigzagged) order.
						* Note: the extra entries in jpeg_natural_order[] will save us
						* if k >= DCTSIZE2, which could happen if the data is corrupted.
						*/
						(*block)[jpeg_natural_order[k]] = (JCOEF) s;
					} else {
						if (r != 15)
							break;
						k += 15;
					}
				}

			} else {

				/* Section F.2.2.2: decode the AC coefficients */
				/* In this path we just discard the values */
				for (k = 1; k < DCTSIZE2; k++) {
					HUFF_DECODE(s, br_state, actbl, return FALSE, label3);

					r = s >> 4;
					s &= 15;

					if (s) {
						k += r;
						CHECK_BIT_BUFFER(br_state, s, return FALSE);
						DROP_BITS(s);
					} else {
						if (r != 15)
							break;
						k += 15;
					}
				}

			}
		}

		/* Completed MCU, so update state */
		BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
		ASSIGN_STATE(entropy->saved, state);
	}

	/* Account for restart interval (no-op if not using restarts) */
	entropy->restarts_to_go--;

	return TRUE;
}


/*
* Module initialization routine for Huffman entropy decoding.
*/

GLOBAL(void)
jinit_huff_decoder (j_decompress_ptr cinfo)
{
	huff_entropy_ptr entropy;
	int i;

	entropy = (huff_entropy_ptr)
		(*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
		SIZEOF(huff_entropy_decoder));
	cinfo->entropy = (struct jpeg_entropy_decoder *) entropy;
	entropy->pub.start_pass = start_pass_huff_decoder;
	entropy->pub.decode_mcu = decode_mcu;

	/* Mark tables unallocated */
	for (i = 0; i < NUM_HUFF_TBLS; i++) {
		entropy->dc_derived_tbls[i] = entropy->ac_derived_tbls[i] = NULL;
	}
}