Since decals may have thinkers attached this will crash when such a savegame gets loaded, because the thinker lists get reset in P_SerializeThinkers, deleting any thinker that already was processed.
I also added an error message that immediately aborts the save process if such an out-of-sequence thinker is attempted to be written out.
This obviously breaks savegame compatibility again...
* Added falloff parameter to A_QuakeEx.
- Treated just like A_Explode's 'fullradiusdamage' parameter, where the quake will fall off from this distance on out to the edge. Default is 0, which means no falloff.
- Credits to MaxED and Michaelis for helping.
* - Added HighPoint parameter to QuakeEx.
- Allows fine tuning of where the quake's maximum or minimum occurs, in tics. This must be a range between [1, duration).
- For up or down scaling quakes, this sets the quake to reach maximum sooner or start minimizing later.
- For both, this indicates when the strongest will occur. Default is 0, or in the middle.
The original commits were nearly impossible to find in the convoluted commit tree, so I think it's preferable to have one clean commit instead.
- for quakes, making a distinction between circular and elliptic thrust is pointless, so the checks were removed and both paths consolidated. The elliptic code will do exactly the same for circles and there isn't even a performance difference.
- Converted P_MovePlayer and all associated variables to floating point because this wasn't working well with a mixture between float and fixed.
Like the angle commit this has just been patched up to compile, the bulk of work is yet to be done.
Patched up everything so that it compiles without errors again. This only addresses code related to some compile error. A large portion of the angle code still uses angle_t and converts back and forth.
This was to resolve some circular dependencies with the portal code.
The most notable changees:
* FTextureID was moved from textures.h to doomtype.h because it is frequently needed in files that don't want to do anything with actual textures.
* split off the parts from p_maputl into a separate header.
* consolidated all blockmap related data into p_blockmap.h
* split off the polyobject parts into po_man.h
- Converting the wave speed back to floats, since I'm using sin() instead
of the finesine table now.
- Pre-shift the quake intensities to avoid extra shifting in GetModIntensity.
- Loading old saves will shift the intensities to fixed point but will not
convert the fixed wave speeds to floats. The chances of this
being in a savegame where the speeds are non-zero is pretty much nil,
and int and floating point 0 are bitwise identical (not counting -0.0).
- Squashed commit of the following:
commit bc45fe3263d34ef5f746f524687999c19bf7b779
Author: Randy Heit <rheit@users.noreply.github.com>
Date: Sun Mar 1 18:51:05 2015 -0600
wave scale -> wave speed
commit ff96388b128c724c1198757bfa52f1935a263356
Author: Randy Heit <rheit@users.noreply.github.com>
Date: Sun Mar 1 18:45:32 2015 -0600
More sine quake fixes
commit 2a89749a6fe6d271b9fbdc218779f680afcf4cb6
Merge: 719dfbe 5456074
Author: MajorCooke <paul.growney22@gmail.com>
Date: Sat Feb 28 20:37:22 2015 -0600
Added QF_WAVE to A_QuakeEx.
- Changes the random quakes into a sine wave (see Shadow Warrior/Rise of the Triad reboots, Hard Reset, etc.)
- Added 3 properties to control waves per second along each individual axis. Only works with QF_WAVE.
- Intensity X/Y/Z property becomes the amplitude of the wave.
- Stacks with regular quakes, allowing shaking along the camera which must be called using A_QuakeEx WITHOUT the flag, or the other quaking functions.
- Uses the youngest quake's time for positioning.
commit 54560741581e8d15cc7060e8e068cf85e9a4b432
Author: MajorCooke <paul.growney22@gmail.com>
Date: Sat Feb 28 20:21:19 2015 -0600
Recommitted recommended changes by Randi, with some modifications. Now, we should be finished!
commit 6f4473013411686d88fc185bdc1cc58b1035b0f1
Author: MajorCooke <paul.growney22@gmail.com>
Date: Sat Feb 28 12:52:57 2015 -0600
Finish this revert.
commit 467e53f9400f588a2ada9b32e7634cb1f4ad5066
Author: MajorCooke <paul.growney22@gmail.com>
Date: Sat Feb 28 12:46:02 2015 -0600
Reverted back to what was working.
commit da9de56a67efda08036e481fd5fccd5392ce6810
Author: MajorCooke <paul.growney22@gmail.com>
Date: Thu Feb 26 18:53:20 2015 -0600
Forgot this bit, for testing.
commit c5093d9bb97caf8478cefc32abc56a036feeea58
Author: MajorCooke <paul.growney22@gmail.com>
Date: Thu Feb 26 18:52:46 2015 -0600
Some more progress, but...
- This did not solve anything. In fact, it did the opposite -- completely broke wave quakes. Now they only happen whenever a random quake is in progress.
- Left in the commented code on purpose so Randi can test it.
commit 7e526405d2127cbb279f66008c8f8e55a5d497f3
Author: MajorCooke <paul.growney22@gmail.com>
Date: Wed Feb 25 17:50:42 2015 -0600
- Use newest waveform timer, not oldest.
commit 1356443609dbc6c7f46e081d0846816dc0836124
Author: MajorCooke <paul.growney22@gmail.com>
Date: Wed Feb 25 17:32:09 2015 -0600
- Got regular quakes to multiply onto sine quakes, but the vice versa needs fixing too.
commit d95796c94c70cd0229d4a6d30f69e3a7568b9588
Author: MajorCooke <paul.growney22@gmail.com>
Date: Wed Feb 25 16:46:21 2015 -0600
- Last hurdle. Now just need to figure out how to properly scale up and down.
commit 4bc3458e689155ce72c09776604d9eb4fa73d8be
Author: MajorCooke <paul.growney22@gmail.com>
Date: Tue Feb 24 23:18:03 2015 -0600
- Fixed the quakes being unstackable.
commit b51012d6d4ea065bf7f6fc9c1a0472966491f7af
Author: MajorCooke <paul.growney22@gmail.com>
Date: Mon Feb 23 23:48:34 2015 -0600
QF_WAVE renamed from SINE.
- Lots of ground covered, but still more to go.
- Still need to figure out how to make the camera properly shudder.
commit 427e4893193470bbf45415ffec70a0b69b8cccfd
Author: MajorCooke <paul.growney22@gmail.com>
Date: Sun Feb 22 16:52:30 2015 -0600
- Begin the groundworks for QF_SINE.
- Need to figure out how to rework and manipulate the sine wave to move faster, and to allow going below 0 without breaking it too much.
- Quake scaling should be handled for each quake. The former
implementation was potentially taking flags from one quake and applying
them to another, which is broken.
- Remove all the int<->float conversions.
- When using both scaling flags, by default, the effect only reaches half peak going either way. This forces it to go all the way to the top (or bottom if using QF_MAX) before scaling back to its original height..
- QF_SCALEUP behaves like QF_SCALEDOWN: it gradually scales the tremors, only going upwards.
- QF_SCALEUP and QF_SCALEDOWN can be combined to make an earthquake that gradually smoothes in and out.
- QF_MAX can be used to invert this behavior, where it starts at the peak of the amplitude, fades out half way, and then grows back to maximum.
- This could cause problems in places like the GZDoom renderer in the odd circumstance, causing the camera to become stuck in the floor or ceiling until the quake expires.
- Relative quakes are different from other quakes; all quakes affecting
the camera do not become relative if one of them is relative.
- Use a single function call to get quake visual parameters instead of four.
- Thrust things in a psuedo-ellipse if they're inside a damaging quake whose
IntensityX != IntensityY.
- Don't break old savegames.
- Unlocks the full potential of using quakes, including the Z axis. Each intensity applies to X/Y/Z planes whenever a player is experiencing it.
- Flags:
- QF_RELATIVE - Adjusts the quaking of the camera to go in the direction its aiming (X: forward/backward. Y: Left/right.)
- Plans for including pitch will be implemented in the future for the Z axis with relativity.
* savegames stored an index in the switch table and performed no validation when loading a savegame.
* setting of a random switch animation duration was broken.
* separated the 2 values stored in the Time variable into 2 separate variables.
* defining a switch with one texture already belonging to another switch could leave broken definitions in the switch table.
- added function for serializing switch and door animation pointers.
- bumped min. savegame versions due to changes to DButtonThinker and removed all current savegame compatibility code.
SVN r3030 (trunk)
consideration the size and shape of the sector producing the sound. See
the lifts on Doom 2 MAP30 and compare with previous versions.
- Fixed: The stop sound for sector-based sound sequences was not played with
the CHAN_AREA flag.
- Removed the distinction between S_Sound() and S_SoundID() functions. Use
S_Sound() for both names and IDs from now on.
SVN r1034 (trunk)
before sending it to Channel::getReverbProperties().
- Fixed: The earthquake effect did not play its sound as an actual looping
sound. I'm a bit surprised this only recently started causing problems.
SVN r923 (trunk)
in DEarthQuake::StaticGetQuakeIntensity. The reason for this: Quakes were
never supposed to be additive. Many maps, including Hexen's own have placed
quake spots so that they cover a larger area but the areas covered by the
single spots overlap. On such maps the view will shake like crazy and
render the map nearly unplayable.
SVN r480 (trunk)
because S_GetSoundPlayingInfo cannot properly resolve player and random sounds.
- Fixed: S_IsActorPlayingSomething has to resolve aliases and player sounds.
- Took S_ParseSndSeq call out of S_Init. This doesn't work when parsing SNDINFO
in D_DoomMain.
- Moved SNDINFO reading back to its old place after MAPINFO. This is necessary
for Hexen's music definitions.
SVN r425 (trunk)
