- ALLOWTHRUFLAGS must be used on the puffs, added for the sake of compatibility with older mods. This applies to the following:
-- Bullets: THRUACTORS, THRUSPECIES
-- Rails: Same as bullets, but includes THRUGHOST.
- restored the original 3D floor code to retrieve the current floor in P_CheckPosition. The portal aware version was a bit too strict and could place the actor on the wrong side when moving at high speeds.
This got accidentally committed. Even if this gets extended to reach through portals it needs to be done differently. FMultiBlockLinesIterator can't guarantee to get every sector that's being touched.
This is for rendering the sprite properly in all areas the actor touches. The original thinglist is not sufficient for this and Boom's touching thinglist has other purposes and collects too much data.
This new list will only get filled in when the actor is actually crossing a portal plane, for the normal sector thinglist will still be used.
This piggybacks on the msecnode_t code which has been extended to be able to handle more than one list by passing the sector's membert pointers as parameters.
This required some changes to the Trace function because it turned out that the original was incapable of collecting the required information:
* actors are now also linked into blockmap blocks on both sides if they occupy the boundary of a sector portal.
* Trace will no longer set up parallel traces in all parts connected with sector portal, but only use one trace and relocate that on the actual boundary.
The only reason this even existed was that ZDoom's original VC projects used __fastcall. The CMake generated project do not, they stick to __cdecl.
Since no performance gain can be seen by using __fastcall the best course of action is to just remove all traces of it from the source and forget that it ever existed.
Sadly the mappers cannot be trusted to use a feature correctly. Despite repeatedly telling that portals on one-sided lines are problematic, everybody seems to do it this way - and then report bugs if it doesn't work. Under such circumstances the only safe option is to block such portals entirely.
See http://forum.zdoom.org/viewtopic.php?f=2&t=51511&p=898522#p898522 for a typical example of the problems this might cause.
This was accidentally deleted during one round of portal refactoring but is essential to prevent multiple teleport activations in one move.
Fixing this also allowed removing the fudging that was added to work around the issue in P_TryMove.
This could happen if the damage calculations resulted in a value between 0 and 1, which for the actual check was multiplied with the damage parameter of P_RadiusAttack which inflated the fractional value to something that looked like actual damage but was later truncated.
While testing this it became clear that with the higher precision of doubles it has to be avoided at all costs to compare an actor's z position with a value retrieved from ZatPoint to check if it is standing on a floor. There can be some minor variations, depending on what was done with this value. Added isAbove, isBelow and isAtZ checking methods to AActor which properly deal with the problem.
Only things left here are accesses to AActor::ceilingz and radius in A_PainShootSkull, plus scaleX and scaleY in the ScriptedMarine sprite setting code.
Most is still using wrapper functions around the fixed point versions.
- Converted P_MovePlayer and all associated variables to floating point because this wasn't working well with a mixture between float and fixed.
Like the angle commit this has just been patched up to compile, the bulk of work is yet to be done.
Patched up everything so that it compiles without errors again. This only addresses code related to some compile error. A large portion of the angle code still uses angle_t and converts back and forth.
- fixed: P_TryMove could loop endlessly over a list of static portals when there was an error during portal creation.
# Conflicts:
# src/gl/models/gl_models.cpp
# src/gl/scene/gl_sprite.cpp
When a spechit results in teleportation, P_TryMove never accounted for that, so that subsequent spechits either failed or succeeded, depending on where the teleport ends up.
With portal-aware positions stored within the spechit this no longer worked, so some handling is needed to revert to the original behavior in case there's no portals to consider.
The ideal solution would have been to stop checking spechits (or to block further teleports) once this happens but the likelihood of some old maps depending on this is high.
Links through sector portals are not done because nearly all the checks can be performed without doing this so if it works without there's no need to add more processing time.
Will have to see if there's cases left where such a link is needed and if so, whether there's better options to do it.
For line portals such links are necessary to have proper collision detection with actors that are currently transitioning the portal.
This currently only works for linked portals. For other types some major refactoring may be necessary because it not only requires multiple passes of P_RadiusAttack but also an alteration of how sight checks work.
- fixed: P_FindFloorCeiling set the floorsector for a new ceilingheight.
Note: P_DrawRailTrail still needs to be changed, at the moment rail trails through portals will not work correctly.
- fixed: FMultiBlockLinesIterator initialized continueup twice but forgot continuedown.
- fixed: One of the debug messages in P_AimLineAttack was missing an if (aimdebug).
To allow processing the hit through an arbitrary portal without reference to the portal group table, P_AimLineAttack and P_LineAttack need to pass some more info than just the linetarget.
We need the relative positions of shooter and target within the visual reference of the other to calculate proper angles and we need to know if such a portal was crossed at all, because a few things, e.g. seeker missiles won't work with them.
- fixed setup of target acquisition for the Mage Staff.
The pre-acquired seeker target was never passed to the spawned projectiles.
- converted the P_TranslatePortal* functions to use floating point trigonometry. The combination of R_PointToAngle and finesine even created discrepancies with perfectly parallel portals which is just not acceptable.
- added a function to FPathTraverse to relocate the trace and restart from the new position.
- made P_UseLines portal aware. Traversal through line portals is complete (all types, even teleporters), whether sector portals need better treatment remains to be seen - at the moment it only checks the range at the player's vertical center.
It can easily happen that the lower sector has no lines below the checked area, in which case it would not set the dropoffz correctly. To prevent this, P_LineOpening must, when it checks the opening over a sector portal, actually calculate the dropoff to the lower portal itself by calling sector_t::NextLowestPointAt. It also means that FindRefPoint must calculate a proper reference point when one side of the line to be checked is part of a floor portal.
This includes:
* allow one sided portal linedefs to be crossable when part of a polyobject. Due to the limitations, two-sided linedefs won't work here. For general use this is still not allowed because making them passable would require some crippling fudging.
* delay portal finalization until after polyobjects have been spawned.
* the camera interpolation also needs to handle angle differences.
The code is still not 100% complete - the most important thing that is still missing is proper handling of P_CheckPosition through arbitrary portals.
* Blocking lines above or below the current sector should only block if they actually intersect with the currently checking actor.
* Sectors above a ceiling portal should not change current floor information and vice versa.
* removed all code for dealing with z-displacing portals in the iterator loops. This would cause too many problems so I decided to scrap any provisions for allowing interactive portals with z-displacement. They will remain restricted to pure teleporter portals.
* changed spechit to carry a position along with the special line. If something is activated through an interactive portal this is needed to calculate movement.
* pass the abovementioned position to CheckForPushSpecial.
* collect touched portal lines in a second array analogous to spechit.
* use FMultiBlockThingsIterator in P_TestMobjZ.
(This is just a safety commit before doing some more extensive behind-the-scenes refactoring.)
Notable changes here:
* use the same logic for determining whether a 3D floor is 'below' or 'above' the actor as all the other functions.
* removed the broken code which tried to detect whether an actor was touching a steep slope. Better use P_LineOpening to find the correct planes and store the results.
* improved detection whether the slopes on both sides of a plane are identical, using the same data as for steep slope detection.
Note: This replaces AActor::intersects with a direct calculation. Although that function could be adjusted it'd mean some redundant distance calculations which are easily avoided.
- some consolidation in p_map.cpp. PIT_CheckLine and PIT_FindFloorCeiling had quite a bit of redundancy which has been merged.
- čontinued work on FMultiBlockLinesIterator. It's still not completely finished.
A big problem with this function was that some flags required setting up some variables before calling it and others did not. It will now set everything up itself so all initializations to AActor::floorz and ceilingz that were made before these calls (which were all identical to begin with) could be removed and the internal initialization logic streamlined.
