Christoph Oelckers
9d71c91f01
- reenabled software warping for shader-less rendering.
2016-04-26 20:20:00 +02:00
Christoph Oelckers
924b72b633
- added workarounds for the invulnerability colormap for non-shader rendering. Unlike the shader based versions these do not decolorize the screen. The advantage to the old texture duplication is that this is far less stressful on performance.
2016-04-26 20:02:57 +02:00
Christoph Oelckers
913e3df7e3
- fixed display of alpha textures without shaders.
...
As it turned out, the translation's alpha channel was clobbered by the whole setup.
2016-04-26 19:11:32 +02:00
Christoph Oelckers
7e6e2bc0a8
- stated adding GL 2.0 compatibility handling
2016-04-26 18:24:02 +02:00
Christoph Oelckers
eb27057853
- enable shader-less rendering. Still very incomplete, but at least the basics are working.
2016-04-26 16:44:03 +02:00
Christoph Oelckers
3b1500438d
- got rid of VAO's. they have no impact on performance and are a general nuisance if some render paths cannot use them.
...
- cleaned up gl_interface and removed gl.compatibility.
2016-04-26 16:26:34 +02:00
Christoph Oelckers
f066457a48
- add shader patching to allow running the engine with GLSL 1.2.
...
- made some initial preparations for the shader-less fallback path.
2016-04-26 15:26:52 +02:00
Christoph Oelckers
ee9a40f5e9
- replace FLOATTYPE with float in stereo3d code.
2016-04-26 15:20:27 +02:00
Christoph Oelckers
090d13b915
- updated gl_interface to deal with older GL versions.
...
- added the framework for allowing multipass textured dynamic lights again.
2016-04-26 15:20:26 +02:00
Christoph Oelckers
8b5c741358
- check the proper command line option for rejecting a core profile.
2016-04-26 15:19:38 +02:00
Christoph Oelckers
97bed58d7d
- use a compatibility mode version of gl_load, so that the fallback GL 2 code can get its definitions.
2016-04-26 11:32:40 +02:00
Christoph Oelckers
fc38728309
- made some changes to the shaders to allow downpatching them to GLSL 1.2:
...
* disable the dynamic light code if no buffers are available
* added a duplicate of the getTexel function which cannot be patched without creating syntax problems.
* fixe int<->float conversion warning, which on some compilers may be an error.
2016-04-26 11:31:27 +02:00
Christoph Oelckers
172290224b
- make modes 2 and 3 of Teleport_NoFog compatible with Eternity by defaulting to mode 1 when no line is available.
2016-04-25 01:01:28 +02:00
Christoph Oelckers
22b7a38539
- fixed incorrect sky texture check with Transfer_Heights. The actual sector was checked, not the one created by gl_FakeFlat.
2016-04-24 14:17:06 +02:00
Christoph Oelckers
f77c4642cb
- made the adjustments.
2016-04-24 13:35:43 +02:00
Christoph Oelckers
2914cdc939
Merge branch 'master' of https://github.com/rheit/zdoom
...
# Conflicts:
# src/r_defs.h
2016-04-24 12:19:07 +02:00
Christoph Oelckers
0f99d7d73f
- floatified the few remaining linedef and sector properties that still were fixed_t. The only fixed point things left in r_defs.h are the nodes and a fixed point setter function for vertex_t, which is still needed by the node builder.
2016-04-24 12:15:09 +02:00
Christoph Oelckers
31845cd16b
- fixed two fixed/float mixups.
2016-04-24 10:24:43 +02:00
Randy Heit
593f6c29ad
Use 2 decimal places for volume sliders, since they move in 0.05 increments
2016-04-23 22:38:55 -05:00
Randy Heit
e96ed6bf8d
Add FBaseCVar::GetHumanString()
...
- For most cvars, this is equivalent to calling GetGenericRep() to get a
string.
- For float cvars, it uses %g instead of %H, because %H is generally more
information than is needed.
2016-04-23 22:30:08 -05:00
Randy Heit
fc54dd1ff0
Use %H when converting float cvars to strings to avoid information loss
2016-04-23 22:08:49 -05:00
Randy Heit
3a0d046f7e
Fix rendering with SW 2D: modf usage was backwards
2016-04-23 21:29:40 -05:00
Randy Heit
96a0bee651
Quiet two more warnings from GCC
2016-04-23 21:00:35 -05:00
Randy Heit
3cabd5f0ed
Fix compilation with GCC
...
- GCC is pickier than Visual C++. GCC requires that structs with constructors, etc that are
used in a union must be defined outside the union. VC++ lets you do it inline.
2016-04-23 20:58:15 -05:00
Randy Heit
991f49e321
Avoid copying vissprite_t in R_DrawPSprites()
2016-04-23 20:42:14 -05:00
Randy Heit
b8e3e1f095
Remove BAM_FACTOR from FAngle, because it takes up physical space in the struct
2016-04-23 17:27:36 -05:00
Christoph Oelckers
565bab8bd3
- removed some unnecessary temporary variables.
2016-04-23 22:55:44 +02:00
Christoph Oelckers
f420ccd287
- made Teleport_NoFog compatible with Hexen and Eternity.
...
ZDoom defaulted to Boom's (buggy) angle adjustment.
Changed it so that
* Mode 0 is like Hexen, performing no adjustment at all. This still should match all known maps using this special.
* Mode 1 remains unchanged.
* Mode 2 replicates Boom's broken angle adjustment and is used in the xlat file.
* Mode 3 implements the correct angle adjustment that Boom originally intended.
(Note: Should some map require something different it should be handled with compatibility.txt instead of reverting this back to the broken way it was before.)
2016-04-23 21:32:40 +02:00
Christoph Oelckers
eaabb5e986
- fixed vissprite_t &operator= declaration.
2016-04-23 15:51:46 +02:00
Christoph Oelckers
0d17459c36
- do not disable sampler objects with -gl3.
2016-04-23 15:47:51 +02:00
MajorCooke
6bba84458c
- Rail spawned actor trails now set their targets to the shooter and transfer pitch.
2016-04-23 08:19:59 -05:00
Christoph Oelckers
78da8b5a60
Merge branch 'master' of https://github.com/rheit/zdoom
2016-04-23 14:22:56 +02:00
Christoph Oelckers
5fcdb7b80d
- bump savegame version for today's changes.
2016-04-23 14:20:40 +02:00
Christoph Oelckers
c246d1c1ad
Merge branch 'master' of c:\programming\doom-dev\zdoom
2016-04-23 13:56:05 +02:00
Christoph Oelckers
3c13d8085b
- removed unused R_PointToDist2 and R_PointToAngle2 functions.
2016-04-23 13:55:50 +02:00
Christoph Oelckers
9d9219795a
- adjusted function names.
2016-04-23 13:48:25 +02:00
Christoph Oelckers
bf36900299
Merge branch 'master' of c:\programming\doom-dev\zdoom
2016-04-23 13:40:19 +02:00
Christoph Oelckers
2447f7bc38
- renamed FTransform access functions.
2016-04-23 13:40:02 +02:00
Christoph Oelckers
38f1213387
- made some adjustments.
2016-04-23 13:35:51 +02:00
Christoph Oelckers
e56d643924
Merge branch 'master' of c:\programming\doom-dev\zdoom
2016-04-23 12:42:21 +02:00
Christoph Oelckers
04e614daec
- removed some fixed point functions that are no longer needed.
...
- fixed: Visplane checks should only compare the plane flags that are relevant for rendering and mask out the rest.
- floatified FTransform and made the visplane checks a bit less verbose by moving the comparison as an operator into FTransform.
Note that this operator needs forceinline on Visual Studio so that it won't get called as a function.
2016-04-23 12:42:07 +02:00
Christoph Oelckers
a17e0b70d2
- adjustment for function name changes.
2016-04-23 11:38:33 +02:00
Christoph Oelckers
47834907da
Merge branch 'master' of c:\programming\doom-dev\zdoom
2016-04-23 11:29:27 +02:00
Christoph Oelckers
35a6994d0a
- remove the 'F' prefix from the floating point access function to the sidedef texture info, now that the fixed point versions are gone.
2016-04-23 10:55:55 +02:00
Christoph Oelckers
be8d1b46a7
- remove the deleted functions, now that they are no longer needed.
2016-04-23 10:51:58 +02:00
Christoph Oelckers
6450752399
- made it compile again.
...
The software renderer float conversion removed viewx and viewy which are still needed for efficient position checks against nodes without constant float->fixed conversions.
2016-04-23 10:50:19 +02:00
Christoph Oelckers
ba37854e44
Merge branch 'master' of c:\programming\doom-dev\zdoom
...
# Conflicts:
# src/r_defs.h
2016-04-23 09:43:21 +02:00
Christoph Oelckers
4d4f31fd83
- floatified sidedef texture info and fixed two bugs involving this data.
2016-04-23 09:41:59 +02:00
Randy Heit
f1b3f59bcc
Renderer floatification: Use floating point for wall scale and yrepeat
2016-04-22 23:12:53 -05:00
Randy Heit
1f97488945
Renderer floatification: Use floating point for decals
2016-04-22 23:12:53 -05:00