Merge branch 'master' of https://github.com/rheit/zdoom

src/CMakeLists.txt

@@ -979,6 +979,7 @@ add_executable( zdoom WIN32 MACOSX_BUNDLE
 	p_xlat.cpp
 	parsecontext.cpp
 	po_man.cpp
+        portal.cpp
 	r_swrenderer.cpp
 	r_utility.cpp
 	r_3dfloors.cpp

src/actionspecials.h

@@ -138,6 +138,9 @@ DEFINE_SPECIAL(Thing_SpawnFacing, 139, 2, 4, 4)
 DEFINE_SPECIAL(Sector_ChangeSound, 140, 2, 2, 2)
 
 DEFINE_SPECIAL(Teleport_NoStop, 154, 2, 3, 3)
+// portal specials
+DEFINE_SPECIAL(Line_SetVisualPortal, 155, -1, -1, 3)
+DEFINE_SPECIAL(Line_SetPortal, 156, -1, -1, 3)
 // GZDoom/Vavoom specials 
 // Although ZDoom doesn't support them it's better to have them defined so that
 // WADs using them somewhere can at least be started without aborting due

src/p_acs.cpp

@@ -75,6 +75,7 @@
 #include "actorptrselect.h"
 #include "farchive.h"
 #include "decallib.h"
+#include "portal.h"
 #include "p_terrain.h"
 #include "version.h"
 #include "p_effect.h"
@@ -8298,6 +8299,9 @@ scriptwait:
 					line->args[4] = STACK(1);
 					DPrintf("Set special on line %d (id %d) to %d(%d,%d,%d,%d,%d)\n",
 						linenum, STACK(7), specnum, arg0, STACK(4), STACK(3), STACK(2), STACK(1));
+
+					// [ZZ] re-link with portals (in case this was something related to portal specials)
+					P_CheckPortal(line);
 				}
 				sp -= 7;
 			}

src/p_buildmap.cpp

@@ -17,6 +17,7 @@
 #include "g_level.h"
 #include "r_data/colormaps.h"
 #include "gi.h"
+#include "portal.h"
 
 // MACROS ------------------------------------------------------------------
 
@@ -629,6 +630,11 @@ static void LoadWalls (walltype *walls, int numwalls, sectortype *bsec)
 		}
 	}
 
+	// [ZZ] set initial line portal link
+	//      (even though this is rather hard to happen... build doesn't have portals in our sense and it's walls don't get translated into anything like this)
+	for (int i = 0; i < numlines; i++)
+		P_CheckPortal(&lines[i]);
+
 	// Finish setting sector properties that depend on walls
 	for (i = 0; i < numsectors; ++i, ++bsec)
 	{

src/p_setup.cpp

@@ -68,6 +68,7 @@
 #include "po_man.h"
 #include "r_renderer.h"
 #include "r_data/colormaps.h"
+#include "portal.h"
 
 #include "fragglescript/t_fs.h"
 
@@ -1959,6 +1960,11 @@ void P_SetLineID (int i, line_t *ld)
 		case Static_Init:
 			if (ld->args[1] == Init_SectorLink) setid = ld->args[0];
 			break;
+
+		case Line_SetPortal:
+		case Line_SetVisualPortal:
+			setid = ld->args[1]; // 0 = target id, 1 = this id, 2 = plane anchor
+			break;
 		}
 		if (setid != -1)
 		{
@@ -2059,6 +2065,9 @@ void P_FinishLoadingLineDef(line_t *ld, int alpha)
 		ld->special = 0;
 		break;
 	}
+
+	// [ZZ] check initial portal link
+	P_CheckPortal(ld);
 }
 // killough 4/4/98: delay using sidedefs until they are loaded
 void P_FinishLoadingLineDefs ()

src/p_udmf.cpp

@@ -47,6 +47,7 @@
 #include "r_data/colormaps.h"
 #include "w_wad.h"
 #include "p_tags.h"
+#include "portal.h"
 #include "p_terrain.h"
 
 //===========================================================================

src/portal.cpp

@@ -0,0 +1,368 @@
+#include "portal.h"
+#include "p_local.h"
+#include "p_lnspec.h"
+#include "r_bsp.h"
+#include "r_segs.h"
+#include "c_cvars.h"
+#include "m_bbox.h"
+#include "p_tags.h"
+
+// simulation recurions maximum
+CVAR(Int, sv_portal_recursions, 4, CVAR_ARCHIVE|CVAR_SERVERINFO)
+
+PortalDrawseg* CurrentPortal = NULL;
+int CurrentPortalUniq = 0;
+bool CurrentPortalInSkybox = false;
+
+// [ZZ] lots of floats here to avoid overflowing a lot
+bool R_IntersectLines(fixed_t o1x, fixed_t o1y, fixed_t p1x, fixed_t p1y,
+				      fixed_t o2x, fixed_t o2y, fixed_t p2x, fixed_t p2y,
+				      fixed_t& rx, fixed_t& ry)
+{
+	float xx = FIXED2FLOAT(o2x) - FIXED2FLOAT(o1x);
+	float xy = FIXED2FLOAT(o2y) - FIXED2FLOAT(o1y);
+
+	float d1x = FIXED2FLOAT(p1x) - FIXED2FLOAT(o1x);
+	float d1y = FIXED2FLOAT(p1y) - FIXED2FLOAT(o1y);
+
+	if (d1x > d1y)
+	{
+		d1y = d1y / d1x * 32767.0f;
+		d1x = 32767.0;
+	}
+	else
+	{
+		d1x = d1x / d1y * 32767.0f;
+		d1y = 32767.0;
+	}
+
+	float d2x = FIXED2FLOAT(p2x) - FIXED2FLOAT(o2x);
+	float d2y = FIXED2FLOAT(p2y) - FIXED2FLOAT(o2y);
+
+	float cross = d1x*d2y - d1y*d2x;
+	if (fabs(cross) < 1e-8)
+		return false;
+
+	float t1 = (xx * d2y - xy * d2x)/cross;
+	rx = o1x + FLOAT2FIXED(d1x * t1);
+	ry = o1y + FLOAT2FIXED(d1y * t1);
+	return true;
+}
+
+inline int P_PointOnLineSideExplicit (fixed_t x, fixed_t y, fixed_t x1, fixed_t y1, fixed_t x2, fixed_t y2)
+{
+	return DMulScale32 (y-y1, x2-x1, x1-x, y2-y1) > 0;
+}
+
+bool P_ClipLineToPortal(line_t* line, line_t* portal, fixed_t viewx, fixed_t viewy, bool partial, bool samebehind)
+{
+	// check if this line is between portal and the viewer. clip away if it is.
+	bool behind1 = !!P_PointOnLineSide(line->v1->x, line->v1->y, portal);
+	bool behind2 = !!P_PointOnLineSide(line->v2->x, line->v2->y, portal);
+
+	// [ZZ] update 16.12.2014: if a vertex equals to one of portal's vertices, it's treated as being behind the portal.
+	//                         this is required in order to clip away diagonal lines around the portal (example: 1-sided triangle shape with a mirror on it's side)
+	if ((line->v1->x == portal->v1->x && line->v1->y == portal->v1->y) ||
+		(line->v1->x == portal->v2->x && line->v1->y == portal->v2->y))
+			behind1 = samebehind;
+	if ((line->v2->x == portal->v1->x && line->v2->y == portal->v1->y) ||
+		(line->v2->x == portal->v2->x && line->v2->y == portal->v2->y))
+			behind2 = samebehind;
+
+	if (behind1 && behind2)
+	{
+		// line is behind the portal plane. now check if it's in front of two view plane borders (i.e. if it will get in the way of rendering)
+		fixed_t dummyx, dummyy;
+		bool infront1 = R_IntersectLines(line->v1->x, line->v1->y, line->v2->x, line->v2->y, viewx, viewy, portal->v1->x, portal->v1->y, dummyx, dummyy);
+		bool infront2 = R_IntersectLines(line->v1->x, line->v1->y, line->v2->x, line->v2->y, viewx, viewy, portal->v2->x, portal->v2->y, dummyx, dummyy);
+		if (infront1 && infront2)
+			return true;
+	}
+
+	return false;
+}
+
+bool P_CheckPortal(line_t* line)
+{
+	if (line->special == Line_Mirror)
+	{
+		line->portal = true;
+		line->portal_mirror = true;
+		line->portal_passive = true;
+		line->portal_dst = line;
+	}
+	else if (line->special == Line_SetPortal ||
+			 line->special == Line_SetVisualPortal)
+	{
+		// portal destination is special argument #0
+		line_t* dst = NULL;
+
+		if (line->args[0] > 0)
+		{
+			int linenum = -1;
+
+			for (int i = 0; i < numlines; i++)
+			{
+				if (&lines[i] == line)
+					continue;
+				if (tagManager.LineHasID(&lines[i], line->args[0]))
+				{
+					dst = &lines[i];
+					break;
+				}
+			}
+		}
+
+		if (dst)
+		{
+			line->portal = true;
+			line->portal_mirror = false;
+			line->portal_passive = (line->special == Line_SetVisualPortal);
+			line->portal_dst = dst;
+		}
+		else
+		{
+			line->portal = false;
+			line->portal_mirror = false;
+			line->portal_passive = false;
+			line->portal_dst = NULL;
+		}
+	}
+	else
+	{
+		line->portal = false;
+		line->portal_mirror = false;
+		line->portal_passive = false;
+		line->portal_dst = NULL;
+	}
+
+	return (line->portal);
+}
+
+void P_TranslatePortalXY(line_t* src, line_t* dst, fixed_t& x, fixed_t& y)
+{
+	if (!src || !dst)
+		return;
+
+	fixed_t nposx, nposy;	// offsets from line
+
+	// Get the angle between the two linedefs, for rotating
+	// orientation and velocity. Rotate 180 degrees, and flip
+	// the position across the exit linedef, if reversed.
+	angle_t angle =
+			R_PointToAngle2(0, 0, dst->dx, dst->dy) -
+			R_PointToAngle2(0, 0, src->dx, src->dy);
+
+	angle += ANGLE_180;
+
+	// Sine, cosine of angle adjustment
+	fixed_t s = finesine[angle>>ANGLETOFINESHIFT];
+	fixed_t c = finecosine[angle>>ANGLETOFINESHIFT];
+
+	fixed_t tx, ty;
+
+	nposx = x - src->v1->x;
+	nposy = y - src->v1->y;
+
+	// Rotate position along normal to match exit linedef
+	tx = FixedMul(nposx, c) - FixedMul(nposy, s);
+	ty = FixedMul(nposy, c) + FixedMul(nposx, s);
+
+	tx += dst->v2->x;
+	ty += dst->v2->y;
+
+	x = tx;
+	y = ty;
+}
+
+void P_TranslatePortalVXVY(line_t* src, line_t* dst, fixed_t& vx, fixed_t& vy)
+{
+	angle_t angle =
+		R_PointToAngle2(0, 0, dst->dx, dst->dy) -
+		R_PointToAngle2(0, 0, src->dx, src->dy);
+
+	angle += ANGLE_180;
+
+	// Sine, cosine of angle adjustment
+	fixed_t s = finesine[angle>>ANGLETOFINESHIFT];
+	fixed_t c = finecosine[angle>>ANGLETOFINESHIFT];
+
+	fixed_t orig_velx = vx;
+	fixed_t orig_vely = vy;
+	vx = FixedMul(orig_velx, c) - FixedMul(orig_vely, s);
+	vy = FixedMul(orig_vely, c) + FixedMul(orig_velx, s);
+}
+
+void P_TranslatePortalAngle(line_t* src, line_t* dst, angle_t& angle)
+{
+	if (!src || !dst)
+		return;
+
+	// Get the angle between the two linedefs, for rotating
+	// orientation and velocity. Rotate 180 degrees, and flip
+	// the position across the exit linedef, if reversed.
+	angle_t xangle =
+			R_PointToAngle2(0, 0, dst->dx, dst->dy) -
+			R_PointToAngle2(0, 0, src->dx, src->dy);
+
+	xangle += ANGLE_180;
+	angle += xangle;
+}
+
+void P_TranslatePortalZ(line_t* src, line_t* dst, fixed_t& z)
+{
+	// args[2] = 0 - no teleport
+	// args[2] = 1 - adjust by floor difference
+	// args[2] = 2 - adjust by ceiling difference
+
+	if (src->args[2] == 1)
+	{
+		z = z - src->frontsector->floorplane.ZatPoint(src->v1->x, src->v1->y) + dst->frontsector->floorplane.ZatPoint(dst->v2->x, dst->v2->y);
+	}
+	else if (src->args[2] == 2)
+	{
+		z = z - src->frontsector->ceilingplane.ZatPoint(src->v1->x, src->v1->y) + dst->frontsector->ceilingplane.ZatPoint(dst->v2->x, dst->v2->y);
+	}
+}
+
+// calculate shortest distance from a point (x,y) to a linedef
+fixed_t P_PointLineDistance(line_t* line, fixed_t x, fixed_t y)
+{
+	angle_t angle = R_PointToAngle2(0, 0, line->dx, line->dy);
+	angle += ANGLE_180;
+
+	fixed_t dx = line->v1->x - x;
+	fixed_t dy = line->v1->y - y;
+
+	fixed_t s = finesine[angle>>ANGLETOFINESHIFT];
+	fixed_t c = finecosine[angle>>ANGLETOFINESHIFT];
+
+	fixed_t d2x = FixedMul(dx, c) - FixedMul(dy, s);
+
+	return abs(d2x);
+}
+
+void P_NormalizeVXVY(fixed_t& vx, fixed_t& vy)
+{
+	float _vx = FIXED2FLOAT(vx);
+	float _vy = FIXED2FLOAT(vy);
+	float len = sqrt(_vx*_vx+_vy*_vy);
+	vx = FLOAT2FIXED(_vx/len);
+	vy = FLOAT2FIXED(_vy/len);
+}
+
+// portal tracer code
+PortalTracer::PortalTracer(fixed_t startx, fixed_t starty, fixed_t endx, fixed_t endy)
+{
+	this->startx = startx;
+	this->starty = starty;
+	this->endx = endx;
+	this->endy = endy;
+	intx = endx;
+	inty = endy;
+	intxIn = intx;
+	intyIn = inty;
+	z = 0;
+	angle = 0;
+	depth = 0;
+	frac = 0;
+	in = NULL;
+	out = NULL;
+	vx = 0;
+	vy = 0;
+}
+
+bool PortalTracer::TraceStep()
+{
+	if (depth > sv_portal_recursions)
+		return false;
+
+	this->in = NULL;
+	this->out = NULL;
+	this->vx = 0;
+	this->vy = 0;
+
+	int oDepth = depth;
+
+	fixed_t dirx = endx-startx;
+	fixed_t diry = endy-starty;
+	P_NormalizeVXVY(dirx, diry);
+
+	dirx = 0;
+	diry = 0;
+
+	FPathTraverse it(startx-dirx, starty-diry, endx+dirx, endy+diry, PT_ADDLINES | PT_COMPATIBLE);
+
+	intercept_t *in;
+	while ((in = it.Next()))
+	{
+		line_t* li;
+
+		if (in->isaline)
+		{
+			li = in->d.line;
+
+			if (li->portal && !li->portal_passive)
+			{
+				if (P_PointOnLineSide(startx-dirx, starty-diry, li))
+					continue; // we're at the back side of this line
+
+				line_t* out = li->portal_dst;
+
+				this->in = li;
+				this->out = out;
+
+				// we only know that we crossed it, but we also need to know WHERE we crossed it
+				fixed_t vx = it.Trace().dx;
+				fixed_t vy = it.Trace().dy;
+
+				fixed_t x = it.Trace().x + FixedMul(vx, in->frac);
+				fixed_t y = it.Trace().y + FixedMul(vy, in->frac);
+
+				P_NormalizeVXVY(vx, vy);
+
+				this->vx = vx;
+				this->vy = vy;
+
+				// teleport our trace
+
+				if (!out->backsector)
+				{
+					intx = x + vx;
+					inty = y + vy;
+				}
+				else
+				{
+					intx = x - vx;
+					inty = y - vy;
+				}
+
+				//P_TranslateCoordinatesAndAngle(li, out, startx, starty, noangle);
+				//P_TranslateCoordinatesAndAngle(li, out, endx, endy, angle);
+				//if (hdeltaZ)
+				//	P_TranslateZ(li, out, deltaZ);
+				//P_TranslateCoordinatesAndAngle(li, out, vx, vy, noangle);
+
+				P_TranslatePortalXY(li, out, startx, starty);
+				P_TranslatePortalVXVY(li, out, this->vx, this->vy);
+				intxIn = intx;
+				intyIn = inty;
+				P_TranslatePortalXY(li, out, intx, inty);
+				P_TranslatePortalXY(li, out, endx, endy);
+				P_TranslatePortalAngle(li, out, angle);
+				P_TranslatePortalZ(li, out, z);
+				frac += in->frac;
+				depth++;
+				break; // breaks to outer loop
+			}
+
+			if (!(li->flags & ML_TWOSIDED) || (li->flags & ML_BLOCKEVERYTHING))
+				return false; // stop tracing, 2D blocking line
+		}
+	}
+
+	//Printf("returning %d; vx = %.2f; vy = %.2f\n", (oDepth != depth), FIXED2FLOAT(this->vx), FIXED2FLOAT(this->vy));
+
+	return (oDepth != depth); // if a portal has been found, return false
+}
+

src/portal.h

@@ -0,0 +1,74 @@
+#ifndef _PORTALS_H_
+#define _PORTALS_H_
+
+#include "basictypes.h"
+#include "v_video.h"
+#include "r_defs.h"
+#include "actor.h"
+#include "p_local.h"
+#include "m_bbox.h"
+
+/* portal structure, this is used in r_ code in order to store drawsegs with portals (and mirrors) */
+struct PortalDrawseg
+{
+	line_t* src; // source line (the one drawn) this doesn't change over render loops
+	line_t* dst; // destination line (the one that the portal is linked with, equals 'src' for mirrors)
+
+	int x1; // drawseg x1
+	int x2; // drawseg x2
+
+	int len;
+	TArray<short> ceilingclip;
+	TArray<short> floorclip;
+
+	bool mirror; // true if this is a mirror (src should equal dst)
+};
+
+extern PortalDrawseg* CurrentPortal;
+extern int CurrentPortalUniq;
+extern bool CurrentPortalInSkybox;
+
+/* code ported from prototype */
+bool P_ClipLineToPortal(line_t* line, line_t* portal, fixed_t viewx, fixed_t viewy, bool partial = true, bool samebehind = true);
+bool P_CheckPortal(line_t* line);
+void P_TranslatePortalXY(line_t* src, line_t* dst, fixed_t& x, fixed_t& y);
+void P_TranslatePortalVXVY(line_t* src, line_t* dst, fixed_t& vx, fixed_t& vy);
+void P_TranslatePortalAngle(line_t* src, line_t* dst, angle_t& angle);
+void P_TranslatePortalZ(line_t* src, line_t* dst, fixed_t& z);
+void P_NormalizeVXVY(fixed_t& vx, fixed_t& vy);
+
+// basically, this is a teleporting tracer function,
+// which can be used by itself (to calculate portal-aware offsets, say, for projectiles)
+// or to teleport normal tracers (like hitscan, railgun, autoaim tracers)
+class PortalTracer
+{
+public:
+	PortalTracer(fixed_t startx, fixed_t starty, fixed_t endx, fixed_t endy);
+
+	// trace to next portal
+	bool TraceStep();
+	// trace to last available portal on the path
+	void TraceAll() { while (TraceStep()) continue; }
+
+	int depth;
+	fixed_t startx;
+	fixed_t starty;
+	fixed_t intx;
+	fixed_t inty;
+	fixed_t intxIn;
+	fixed_t intyIn;
+	fixed_t endx;
+	fixed_t endy;
+	angle_t angle;
+	fixed_t z;
+	fixed_t frac;
+	line_t* in;
+	line_t* out;
+	fixed_t vx;
+	fixed_t vy;
+};
+
+/* new code */
+fixed_t P_PointLineDistance(line_t* line, fixed_t x, fixed_t y);
+
+#endif

src/r_bsp.cpp

@@ -56,6 +56,7 @@
 #include "r_sky.h"
 #include "po_man.h"
 #include "r_data/colormaps.h"
+#include "portal.h"
 
 seg_t*			curline;
 side_t* 		sidedef;
@@ -98,8 +99,8 @@ static BYTE		FakeSide;
 
 int WindowLeft, WindowRight;
 WORD MirrorFlags;
-seg_t *ActiveWallMirror;
-TArray<size_t> WallMirrors;
+TArray<PortalDrawseg> WallPortals;
+
 
 static subsector_t *InSubsector;
 
@@ -553,6 +554,11 @@ void R_AddLine (seg_t *line)
 		return;
 	}
 
+	// reject lines that aren't seen from the portal (if any)
+	// [ZZ] 10.01.2016: lines inside a skybox shouldn't be clipped, although this imposes some limitations on portals in skyboxes.
+	if (!CurrentPortalInSkybox && CurrentPortal && P_ClipLineToPortal(line->linedef, CurrentPortal->dst, viewx, viewy))
+		return;
+
 	vertex_t *v1, *v2;
 
 	v1 = line->linedef->v1;
@@ -584,7 +590,7 @@ void R_AddLine (seg_t *line)
 	rw_havehigh = rw_havelow = false;
 
 	// Single sided line?
-	if (backsector == NULL)
+	if (backsector == NULL || (line->linedef->portal && line->sidedef == line->linedef->sidedef[0]))
 	{
 		solid = true;
 	}

src/r_bsp.h

@@ -25,6 +25,7 @@
 
 #include "tarray.h"
 #include <stddef.h>
+#include "portal.h"
 
 // The 3072 below is just an arbitrary value picked to avoid
 // drawing lines the player is too close to that would overflow
@@ -86,6 +87,7 @@ struct drawseg_t
 // backups
 	ptrdiff_t	bkup;	// sprtopclip backup, for mid and fake textures
 	FWallTmapVals tmapvals;
+	int			CurrentPortalUniq; // [ZZ] to identify the portal that this drawseg is in. used for sprite clipping.
 };
 
 
@@ -104,9 +106,8 @@ extern size_t			FirstInterestingDrawseg;
 
 extern int			WindowLeft, WindowRight;
 extern WORD			MirrorFlags;
-extern seg_t*		ActiveWallMirror;
 
-extern TArray<size_t>	WallMirrors;
+extern TArray<PortalDrawseg> WallPortals;
 
 typedef void (*drawfunc_t) (int start, int stop);
 

src/r_defs.h

@@ -988,10 +988,14 @@ struct line_t
 	sector_t	*frontsector, *backsector;
 	int 		validcount;	// if == validcount, already checked
 	int			locknumber;	// [Dusk] lock number for special
+	line_t		*portal_dst;
+	bool		portal;
+	bool		portal_mirror;
+	bool		portal_passive;
 
 	bool isLinePortal() const
 	{
-		return false;
+		return portal;
 	}
 };
 

src/r_main.cpp

@@ -57,6 +57,7 @@
 #include "v_font.h"
 #include "r_data/colormaps.h"
 #include "farchive.h"
+#include "portal.h"
 
 // MACROS ------------------------------------------------------------------
 
@@ -608,52 +609,133 @@ void R_SetupFreelook()
 
 //==========================================================================
 //
-// R_EnterMirror
+// R_EnterPortal
 //
 // [RH] Draw the reflection inside a mirror
+// [ZZ] Merged with portal code, originally called R_EnterMirror
 //
 //==========================================================================
 
-void R_EnterMirror (drawseg_t *ds, int depth)
+CVAR(Int, r_portal_recursions, 4, CVAR_ARCHIVE)
+CVAR(Bool, r_highlight_portals, false, CVAR_ARCHIVE)
+
+void R_HighlightPortal (PortalDrawseg* pds)
 {
+	// [ZZ] NO OVERFLOW CHECKS HERE
+	//      I believe it won't break. if it does, blame me. :(
+
+	BYTE color = (BYTE)BestColor((DWORD *)GPalette.BaseColors, 255, 0, 0, 0, 255);
+
+	BYTE* pixels = RenderTarget->GetBuffer();
+	// top edge
+	for (int x = pds->x1; x < pds->x2; x++)
+	{
+		if (x < 0 || x >= RenderTarget->GetWidth())
+			continue;
+
+		int p = x - pds->x1;
+		int Ytop = pds->ceilingclip[p];
+		int Ybottom = pds->floorclip[p];
+
+		if (x == pds->x1 || x == pds->x2-1)
+		{
+			RenderTarget->DrawLine(x, Ytop, x, Ybottom+1, color, 0);
+			continue;
+		}
+
+		int YtopPrev = pds->ceilingclip[p-1];
+		int YbottomPrev = pds->floorclip[p-1];
+
+		if (abs(Ytop-YtopPrev) > 1)
+			RenderTarget->DrawLine(x, YtopPrev, x, Ytop, color, 0);
+		else *(pixels + Ytop * RenderTarget->GetPitch() + x) = color;
+
+		if (abs(Ybottom-YbottomPrev) > 1)
+			RenderTarget->DrawLine(x, YbottomPrev, x, Ybottom, color, 0);
+		else *(pixels + Ybottom * RenderTarget->GetPitch() + x) = color;
+	}
+}
+
+void R_EnterPortal (PortalDrawseg* pds, int depth)
+{
+	// [ZZ] check depth. fill portal with black if it's exceeding the visual recursion limit, and continue like nothing happened.
+	if (depth >= r_portal_recursions)
+	{
+		BYTE color = (BYTE)BestColor((DWORD *)GPalette.BaseColors, 0, 0, 0, 0, 255);
+		int spacing = RenderTarget->GetPitch();
+		for (int x = pds->x1; x < pds->x2; x++)
+		{
+			if (x < 0 || x >= RenderTarget->GetWidth())
+				continue;
+
+			int Ytop = pds->ceilingclip[x-pds->x1];
+			int Ybottom = pds->floorclip[x-pds->x1];
+
+			BYTE *dest = RenderTarget->GetBuffer() + x + Ytop * spacing;
+
+			for (int y = Ytop; y <= Ybottom; y++)
+			{
+				*dest = color;
+				dest += spacing;
+			}
+		}
+
+		if (r_highlight_portals)
+			R_HighlightPortal(pds);
+
+		return;
+	}
+
 	angle_t startang = viewangle;
 	fixed_t startx = viewx;
 	fixed_t starty = viewy;
+	fixed_t startz = viewz;
 
-	CurrentMirror++;
+	CurrentPortalUniq++;
 
-	unsigned int mirrorsAtStart = WallMirrors.Size ();
+	unsigned int portalsAtStart = WallPortals.Size ();
 
-	vertex_t *v1 = ds->curline->v1;
+	if (pds->mirror)
+	{
+		//vertex_t *v1 = ds->curline->v1;
+		vertex_t *v1 = pds->src->v1;
+
+		// Reflect the current view behind the mirror.
+		if (pds->src->dx == 0)
+		{ // vertical mirror
+			viewx = v1->x - startx + v1->x;
+		}
+		else if (pds->src->dy == 0)
+		{ // horizontal mirror
+			viewy = v1->y - starty + v1->y;
+		}
+		else
+		{ // any mirror--use floats to avoid integer overflow
+			vertex_t *v2 = pds->src->v2;
+
+			float dx = FIXED2FLOAT(v2->x - v1->x);
+			float dy = FIXED2FLOAT(v2->y - v1->y);
+			float x1 = FIXED2FLOAT(v1->x);
+			float y1 = FIXED2FLOAT(v1->y);
+			float x = FIXED2FLOAT(startx);
+			float y = FIXED2FLOAT(starty);
+
+			// the above two cases catch len == 0
+			float r = ((x - x1)*dx + (y - y1)*dy) / (dx*dx + dy*dy);
+
+			viewx = FLOAT2FIXED((x1 + r * dx)*2 - x);
+			viewy = FLOAT2FIXED((y1 + r * dy)*2 - y);
+		}
+		viewangle = 2*R_PointToAngle2 (pds->src->v1->x, pds->src->v1->y,
+									   pds->src->v2->x, pds->src->v2->y) - startang;
 
-	// Reflect the current view behind the mirror.
-	if (ds->curline->linedef->dx == 0)
-	{ // vertical mirror
-		viewx = v1->x - startx + v1->x;
-	}
-	else if (ds->curline->linedef->dy == 0)
-	{ // horizontal mirror
-		viewy = v1->y - starty + v1->y;
 	}
 	else
-	{ // any mirror--use floats to avoid integer overflow
-		vertex_t *v2 = ds->curline->v2;
-
-		float dx = FIXED2FLOAT(v2->x - v1->x);
-		float dy = FIXED2FLOAT(v2->y - v1->y);
-		float x1 = FIXED2FLOAT(v1->x);
-		float y1 = FIXED2FLOAT(v1->y);
-		float x = FIXED2FLOAT(startx);
-		float y = FIXED2FLOAT(starty);
-
-		// the above two cases catch len == 0
-		float r = ((x - x1)*dx + (y - y1)*dy) / (dx*dx + dy*dy);
-
-		viewx = FLOAT2FIXED((x1 + r * dx)*2 - x);
-		viewy = FLOAT2FIXED((y1 + r * dy)*2 - y);
+	{
+		P_TranslatePortalXY(pds->src, pds->dst, viewx, viewy);
+		P_TranslatePortalZ(pds->src, pds->dst, viewz);
+		P_TranslatePortalAngle(pds->src, pds->dst, viewangle);
 	}
-	viewangle = 2*R_PointToAngle2 (ds->curline->v1->x, ds->curline->v1->y,
-								   ds->curline->v2->x, ds->curline->v2->y) - startang;
 
 	viewsin = finesine[viewangle>>ANGLETOFINESHIFT];
 	viewcos = finecosine[viewangle>>ANGLETOFINESHIFT];
@@ -664,38 +746,73 @@ void R_EnterMirror (drawseg_t *ds, int depth)
 	R_CopyStackedViewParameters();
 
 	validcount++;
-	ActiveWallMirror = ds->curline;
+	PortalDrawseg* prevpds = CurrentPortal;
+	CurrentPortal = pds;
 
 	R_ClearPlanes (false);
-	R_ClearClipSegs (ds->x1, ds->x2);
+	R_ClearClipSegs (pds->x1, pds->x2);
 
-	memcpy (ceilingclip + ds->x1, openings + ds->sprtopclip, (ds->x2 - ds->x1)*sizeof(*ceilingclip));
-	memcpy (floorclip + ds->x1, openings + ds->sprbottomclip, (ds->x2 - ds->x1)*sizeof(*floorclip));
+	WindowLeft = pds->x1;
+	WindowRight = pds->x2;
 	
-	WindowLeft = ds->x1;
-	WindowRight = ds->x2;
-	MirrorFlags = (depth + 1) & 1;
+	// RF_XFLIP should be removed before calling the root function
+	int prevmf = MirrorFlags;
+	if (pds->mirror)
+	{
+		if (MirrorFlags & RF_XFLIP)
+			MirrorFlags &= ~RF_XFLIP;
+		else MirrorFlags |= RF_XFLIP;
+	}
+
+	// some portals have height differences, account for this here
+	R_3D_EnterSkybox(); // push 3D floor height map
+	CurrentPortalInSkybox = false; // first portal in a skybox should set this variable to false for proper clipping in skyboxes.
+
+	// first pass, set clipping
+	memcpy (ceilingclip + pds->x1, &pds->ceilingclip[0], pds->len*sizeof(*ceilingclip));
+	memcpy (floorclip + pds->x1, &pds->floorclip[0], pds->len*sizeof(*floorclip));
 
 	R_RenderBSPNode (nodes + numnodes - 1);
 	R_3D_ResetClip(); // reset clips (floor/ceiling)
 
+	PlaneCycles.Clock();
 	R_DrawPlanes ();
 	R_DrawSkyBoxes ();
+	PlaneCycles.Unclock();
 
-	// Allow up to 4 recursions through a mirror
-	if (depth < 4)
+	fixed_t vzp = viewz;
+
+	int prevuniq = CurrentPortalUniq;
+	// depth check is in another place right now
+	unsigned int portalsAtEnd = WallPortals.Size ();
+	for (; portalsAtStart < portalsAtEnd; portalsAtStart++)
 	{
-		unsigned int mirrorsAtEnd = WallMirrors.Size ();
-
-		for (; mirrorsAtStart < mirrorsAtEnd; mirrorsAtStart++)
-		{
-			R_EnterMirror (drawsegs + WallMirrors[mirrorsAtStart], depth + 1);
-		}
+		R_EnterPortal (&WallPortals[portalsAtStart], depth + 1);
 	}
+	int prevuniq2 = CurrentPortalUniq;
+	CurrentPortalUniq = prevuniq;
 
+	NetUpdate();
+
+	MaskedCycles.Clock(); // [ZZ] count sprites in portals/mirrors along with normal ones.
+	R_DrawMasked ();	  //      this is required since with portals there often will be cases when more than 80% of the view is inside a portal.
+	MaskedCycles.Unclock();
+
+	NetUpdate();
+
+	R_3D_LeaveSkybox(); // pop 3D floor height map
+	CurrentPortalUniq = prevuniq2;
+
+	// draw a red line around a portal if it's being highlighted
+	if (r_highlight_portals)
+		R_HighlightPortal(pds);
+
+	CurrentPortal = prevpds;
+	MirrorFlags = prevmf;
 	viewangle = startang;
 	viewx = startx;
 	viewy = starty;
+	viewz = startz;
 }
 
 //==========================================================================
@@ -779,7 +896,8 @@ void R_RenderActorView (AActor *actor, bool dontmaplines)
 	WindowLeft = 0;
 	WindowRight = viewwidth;
 	MirrorFlags = 0;
-	ActiveWallMirror = NULL;
+	CurrentPortal = NULL;
+	CurrentPortalUniq = 0;
 
 	r_dontmaplines = dontmaplines;
 	
@@ -813,12 +931,16 @@ void R_RenderActorView (AActor *actor, bool dontmaplines)
 		PlaneCycles.Unclock();
 
 		// [RH] Walk through mirrors
-		size_t lastmirror = WallMirrors.Size ();
-		for (unsigned int i = 0; i < lastmirror; i++)
+		// [ZZ] Merged with portals
+		size_t lastportal = WallPortals.Size();
+		for (unsigned int i = 0; i < lastportal; i++)
 		{
-			R_EnterMirror (drawsegs + WallMirrors[i], 0);
+			R_EnterPortal(&WallPortals[i], 0);
 		}
 
+		CurrentPortal = NULL;
+		CurrentPortalUniq = 0;
+
 		NetUpdate ();
 		
 		MaskedCycles.Clock();
@@ -827,7 +949,7 @@ void R_RenderActorView (AActor *actor, bool dontmaplines)
 
 		NetUpdate ();
 	}
-	WallMirrors.Clear ();
+	WallPortals.Clear ();
 	interpolator.RestoreInterpolations ();
 	R_SetupBuffer ();
 

src/r_plane.cpp

@@ -58,6 +58,7 @@
 #include "r_3dfloors.h"
 #include "v_palette.h"
 #include "r_data/colormaps.h"
+#include "portal.h"
 
 #ifdef _MSC_VER
 #pragma warning(disable:4244)
@@ -686,9 +687,12 @@ visplane_t *R_FindPlane (const secplane_t &height, FTextureID picnum, int lightl
 			yscale == check->yscale &&
 			angle == check->angle && 
 			sky == check->sky &&
-			CurrentMirror == check->CurrentMirror &&
+			CurrentPortalUniq == check->CurrentPortalUniq &&
 			MirrorFlags == check->MirrorFlags &&
-			CurrentSkybox == check->CurrentSkybox
+			CurrentSkybox == check->CurrentSkybox &&
+			viewx == check->viewx &&
+			viewy == check->viewy &&
+			viewz == check->viewz
 			)
 		{
 		  return check;
@@ -718,7 +722,7 @@ visplane_t *R_FindPlane (const secplane_t &height, FTextureID picnum, int lightl
 	check->viewangle = stacked_angle;
 	check->Alpha = alpha;
 	check->Additive = additive;
-	check->CurrentMirror = CurrentMirror;
+	check->CurrentPortalUniq = CurrentPortalUniq;
 	check->MirrorFlags = MirrorFlags;
 	check->CurrentSkybox = CurrentSkybox;
 
@@ -807,7 +811,7 @@ visplane_t *R_CheckPlane (visplane_t *pl, int start, int stop)
 		new_pl->sky = pl->sky;
 		new_pl->Alpha = pl->Alpha;
 		new_pl->Additive = pl->Additive;
-		new_pl->CurrentMirror = pl->CurrentMirror;
+		new_pl->CurrentPortalUniq = pl->CurrentPortalUniq;
 		new_pl->MirrorFlags = pl->MirrorFlags;
 		new_pl->CurrentSkybox = pl->CurrentSkybox;
 		pl = new_pl;
@@ -1043,7 +1047,7 @@ int R_DrawPlanes ()
 		for (pl = visplanes[i]; pl; pl = pl->next)
 		{
 			// kg3D - draw only correct planes
-			if(pl->CurrentMirror != CurrentMirror || pl->CurrentSkybox != CurrentSkybox)
+			if(pl->CurrentPortalUniq != CurrentPortalUniq || pl->CurrentSkybox != CurrentSkybox)
 				continue;
 			// kg3D - draw only real planes now
 			if(pl->sky >= 0) {
@@ -1063,22 +1067,31 @@ void R_DrawHeightPlanes(fixed_t height)
 
 	ds_color = 3;
 
+	fixed_t oViewX = viewx, oViewY = viewy, oViewZ = viewz;
+	angle_t oViewAngle = viewangle;
+
 	for (i = 0; i < MAXVISPLANES; i++)
 	{
 		for (pl = visplanes[i]; pl; pl = pl->next)
 		{
 			// kg3D - draw only correct planes
-			if(pl->CurrentSkybox != CurrentSkybox)
+			if(pl->CurrentSkybox != CurrentSkybox || pl->CurrentPortalUniq != CurrentPortalUniq)
 				continue;
 			if(pl->sky < 0 && pl->height.Zat0() == height) {
 				viewx = pl->viewx;
 				viewy = pl->viewy;
+				viewz = pl->viewz;
 				viewangle = pl->viewangle;
 				MirrorFlags = pl->MirrorFlags;
 				R_DrawSinglePlane (pl, pl->sky & 0x7FFFFFFF, pl->Additive, true);
 			}
 		}
 	}
+
+	viewx = oViewX;
+	viewy = oViewY;
+	viewz = oViewZ;
+	viewangle = oViewAngle;
 }
 
 
@@ -1180,6 +1193,7 @@ void R_DrawSkyBoxes ()
 		return;
 
 	R_3D_EnterSkybox();
+	CurrentPortalInSkybox = true;
 
 	int savedextralight = extralight;
 	fixed_t savedx = viewx;
@@ -1270,6 +1284,7 @@ void R_DrawSkyBoxes ()
 
 		// Create a drawseg to clip sprites to the sky plane
 		R_CheckDrawSegs ();
+		ds_p->CurrentPortalUniq = CurrentPortalUniq;
 		ds_p->siz1 = INT_MAX;
 		ds_p->siz2 = INT_MAX;
 		ds_p->sz1 = 0;
@@ -1281,6 +1296,7 @@ void R_DrawSkyBoxes ()
 		ds_p->sprtopclip = R_NewOpening (pl->right - pl->left);
 		ds_p->maskedtexturecol = ds_p->swall = -1;
 		ds_p->bFogBoundary = false;
+		ds_p->curline = NULL;
 		ds_p->fake = 0;
 		memcpy (openings + ds_p->sprbottomclip, floorclip + pl->left, (pl->right - pl->left)*sizeof(short));
 		memcpy (openings + ds_p->sprtopclip, ceilingclip + pl->left, (pl->right - pl->left)*sizeof(short));
@@ -1354,6 +1370,7 @@ void R_DrawSkyBoxes ()
 	viewangle = savedangle;
 	R_SetViewAngle ();
 
+	CurrentPortalInSkybox = false;
 	R_3D_LeaveSkybox();
 
 	if(fakeActive) return;

src/r_plane.h

@@ -58,7 +58,7 @@ struct visplane_s
 
 	// kg3D - keep track of mirror and skybox owner
 	int CurrentSkybox;
-	int CurrentMirror; // mirror counter, counts all of them
+	int CurrentPortalUniq; // mirror counter, counts all of them
 	int MirrorFlags; // this is not related to CurrentMirror
 
 	unsigned short *bottom;			// [RH] bottom and top arrays are dynamically

src/r_segs.cpp

@@ -52,6 +52,7 @@
 #include "r_3dfloors.h"
 #include "v_palette.h"
 #include "r_data/colormaps.h"
+#include "portal.h"
 
 #define WALLYREPEAT 8
 
@@ -103,7 +104,7 @@ extern fixed_t	rw_frontfz1, rw_frontfz2;
 int				rw_ceilstat, rw_floorstat;
 bool			rw_mustmarkfloor, rw_mustmarkceiling;
 bool			rw_prepped;
-bool			rw_markmirror;
+bool			rw_markportal;
 bool			rw_havehigh;
 bool			rw_havelow;
 
@@ -1989,7 +1990,7 @@ void R_NewWall (bool needlights)
 {
 	fixed_t rowoffset, yrepeat;
 
-	rw_markmirror = false;
+	rw_markportal = false;
 
 	sidedef = curline->sidedef;
 	linedef = curline->linedef;
@@ -1999,65 +2000,64 @@ void R_NewWall (bool needlights)
 
 	midtexture = toptexture = bottomtexture = 0;
 
-	if (backsector == NULL)
+	if (sidedef == linedef->sidedef[0] &&
+		linedef->portal &&
+		(!linedef->portal_mirror || r_drawmirrors)) // [ZZ] compatibility with r_drawmirrors cvar that existed way before portals
+	{
+		markfloor = markceiling = true; // act like an one-sided wall here (todo: check how does this work with transparency)
+		rw_markportal = true;
+	}
+	else if (backsector == NULL)
 	{
 		// single sided line
 		// a single sided line is terminal, so it must mark ends
 		markfloor = markceiling = true;
-		// [RH] Render mirrors later, but mark them now.
-		if (linedef->special != Line_Mirror || !r_drawmirrors)
+		// [RH] Horizon lines do not need to be textured
+		if (linedef->special != Line_Horizon)
 		{
-			// [RH] Horizon lines do not need to be textured
-			if (linedef->special != Line_Horizon)
-			{
-				midtexture = TexMan(sidedef->GetTexture(side_t::mid), true);
-				rw_offset_mid = sidedef->GetTextureXOffset(side_t::mid);
-				rowoffset = sidedef->GetTextureYOffset(side_t::mid);
-				rw_midtexturescalex = sidedef->GetTextureXScale(side_t::mid);
-				rw_midtexturescaley = sidedef->GetTextureYScale(side_t::mid);
-				yrepeat = FixedMul(midtexture->yScale, rw_midtexturescaley);
-				if (yrepeat >= 0)
-				{ // normal orientation
-					if (linedef->flags & ML_DONTPEGBOTTOM)
-					{ // bottom of texture at bottom
-						rw_midtexturemid = MulScale16(frontsector->GetPlaneTexZ(sector_t::floor) - viewz, yrepeat) + (midtexture->GetHeight() << FRACBITS);
-					}
-					else
-					{ // top of texture at top
-						rw_midtexturemid = MulScale16(frontsector->GetPlaneTexZ(sector_t::ceiling) - viewz, yrepeat);
-						if (rowoffset < 0 && midtexture != NULL)
-						{
-							rowoffset += midtexture->GetHeight() << FRACBITS;
-						}
-					}
+			midtexture = TexMan(sidedef->GetTexture(side_t::mid), true);
+			rw_offset_mid = sidedef->GetTextureXOffset(side_t::mid);
+			rowoffset = sidedef->GetTextureYOffset(side_t::mid);
+			rw_midtexturescalex = sidedef->GetTextureXScale(side_t::mid);
+			rw_midtexturescaley = sidedef->GetTextureYScale(side_t::mid);
+			yrepeat = FixedMul(midtexture->yScale, rw_midtexturescaley);
+			if (yrepeat >= 0)
+			{ // normal orientation
+				if (linedef->flags & ML_DONTPEGBOTTOM)
+				{ // bottom of texture at bottom
+					rw_midtexturemid = MulScale16(frontsector->GetPlaneTexZ(sector_t::floor) - viewz, yrepeat) + (midtexture->GetHeight() << FRACBITS);
 				}
 				else
-				{ // upside down
-					rowoffset = -rowoffset;
-					if (linedef->flags & ML_DONTPEGBOTTOM)
-					{ // top of texture at bottom
-						rw_midtexturemid = MulScale16(frontsector->GetPlaneTexZ(sector_t::floor) - viewz, yrepeat);
+				{ // top of texture at top
+					rw_midtexturemid = MulScale16(frontsector->GetPlaneTexZ(sector_t::ceiling) - viewz, yrepeat);
+					if (rowoffset < 0 && midtexture != NULL)
+					{
+						rowoffset += midtexture->GetHeight() << FRACBITS;
 					}
-					else
-					{ // bottom of texture at top
-						rw_midtexturemid = MulScale16(frontsector->GetPlaneTexZ(sector_t::ceiling) - viewz, yrepeat) + (midtexture->GetHeight() << FRACBITS);
-					}
-				}
-				if (midtexture->bWorldPanning)
-				{
-					rw_midtexturemid += MulScale16(rowoffset, yrepeat);
-				}
-				else
-				{
-					// rowoffset is added outside the multiply so that it positions the texture
-					// by texels instead of world units.
-					rw_midtexturemid += rowoffset;
 				}
 			}
-		}
-		else
-		{
-			rw_markmirror = true;
+			else
+			{ // upside down
+				rowoffset = -rowoffset;
+				if (linedef->flags & ML_DONTPEGBOTTOM)
+				{ // top of texture at bottom
+					rw_midtexturemid = MulScale16(frontsector->GetPlaneTexZ(sector_t::floor) - viewz, yrepeat);
+				}
+				else
+				{ // bottom of texture at top
+					rw_midtexturemid = MulScale16(frontsector->GetPlaneTexZ(sector_t::ceiling) - viewz, yrepeat) + (midtexture->GetHeight() << FRACBITS);
+				}
+			}
+			if (midtexture->bWorldPanning)
+			{
+				rw_midtexturemid += MulScale16(rowoffset, yrepeat);
+			}
+			else
+			{
+				// rowoffset is added outside the multiply so that it positions the texture
+				// by texels instead of world units.
+				rw_midtexturemid += rowoffset;
+			}
 		}
 	}
 	else
@@ -2380,6 +2380,7 @@ void R_StoreWallRange (int start, int stop)
 	rw_offset = sidedef->GetTextureXOffset(side_t::mid);
 	rw_light = rw_lightleft + rw_lightstep * (start - WallC.sx1);
 
+	ds_p->CurrentPortalUniq = CurrentPortalUniq;
 	ds_p->sx1 = WallC.sx1;
 	ds_p->sx2 = WallC.sx2;
 	ds_p->sz1 = WallC.sz1;
@@ -2403,10 +2404,8 @@ void R_StoreWallRange (int start, int stop)
 	// killough 1/6/98, 2/1/98: remove limit on openings
 	ds_p->sprtopclip = ds_p->sprbottomclip = ds_p->maskedtexturecol = ds_p->bkup = ds_p->swall = -1;
 
-	if (rw_markmirror)
+	if (rw_markportal)
 	{
-		size_t drawsegnum = ds_p - drawsegs;
-		WallMirrors.Push (drawsegnum);
 		ds_p->silhouette = SIL_BOTH;
 	}
 	else if (backsector == NULL)
@@ -2617,9 +2616,42 @@ void R_StoreWallRange (int start, int stop)
 	}
 
 	// [RH] Draw any decals bound to the seg
-	for (DBaseDecal *decal = curline->sidedef->AttachedDecals; decal != NULL; decal = decal->WallNext)
+	// [ZZ] Only if not an active mirror
+	if (!rw_markportal)
 	{
-		R_RenderDecal (curline->sidedef, decal, ds_p, 0);
+		for (DBaseDecal *decal = curline->sidedef->AttachedDecals; decal != NULL; decal = decal->WallNext)
+		{
+			R_RenderDecal (curline->sidedef, decal, ds_p, 0);
+		}
+	}
+
+	if (rw_markportal)
+	{
+		PortalDrawseg pds;
+		pds.src = curline->linedef;
+		pds.dst = curline->linedef->portal_dst;
+		pds.x1 = ds_p->x1;
+		pds.x2 = ds_p->x2;
+		pds.len = pds.x2 - pds.x1;
+		pds.ceilingclip.Resize(pds.len);
+		memcpy(&pds.ceilingclip[0], openings + ds_p->sprtopclip, pds.len*sizeof(*openings));
+		pds.floorclip.Resize(pds.len);
+		memcpy(&pds.floorclip[0], openings + ds_p->sprbottomclip, pds.len*sizeof(*openings));
+
+		for (int i = 0; i < pds.x2-pds.x1; i++)
+		{
+			if (pds.ceilingclip[i] < 0)
+				pds.ceilingclip[i] = 0;
+			if (pds.ceilingclip[i] >= RenderTarget->GetHeight())
+				pds.ceilingclip[i] = RenderTarget->GetHeight()-1;
+			if (pds.floorclip[i] < 0)
+				pds.floorclip[i] = 0;
+			if (pds.floorclip[i] >= RenderTarget->GetHeight())
+				pds.floorclip[i] = RenderTarget->GetHeight()-1;
+		}
+
+		pds.mirror = curline->linedef->portal_mirror;
+		WallPortals.Push(pds);
 	}
 
 	ds_p++;

src/r_things.cpp

@@ -319,6 +319,49 @@ nextpost:
 	}
 }
 
+// [ZZ]
+// R_ClipSpriteColumnWithPortals
+//
+static inline bool R_ClipSpriteColumnWithPortals (fixed_t x, fixed_t y, vissprite_t* spr)
+{
+	// [ZZ] 10.01.2016: don't clip sprites from the root of a skybox.
+	if (CurrentPortalInSkybox)
+		return false;
+
+	for (drawseg_t* seg = ds_p; seg-- > firstdrawseg; ) // copied code from killough below
+	{
+		// ignore segs from other portals
+		if (seg->CurrentPortalUniq != CurrentPortalUniq)
+			continue;
+
+		// I don't know what makes this happen (some old top-down portal code or possibly skybox code? something adds null lines...)
+		// crashes at the first frame of the first map of Action2.wad
+		if (!seg->curline) continue;
+
+		line_t* line = seg->curline->linedef;
+		// divline? wtf, anyway, divlines aren't supposed to be drawn. But I definitely saw NULL linedefs in drawsegs.
+		if (!line) continue;
+
+		// check if this line will clip sprites to itself
+		if (!line->portal)
+			continue;
+
+		// don't clip sprites with portal's back side (it's transparent)
+		if (seg->curline->sidedef != line->sidedef[0])
+			continue;
+
+		// don't clip if the sprite is in front of the portal
+		if (!P_PointOnLineSide(x, y, line))
+			continue;
+
+		// now if current column is covered by this drawseg, we clip it away
+		if ((dc_x >= seg->x1) && (dc_x < seg->x2))
+			return true;
+	}
+
+	return false;
+}
+
 //
 // R_DrawVisSprite
 //	mfloorclip and mceilingclip should also be set.
@@ -332,6 +375,7 @@ void R_DrawVisSprite (vissprite_t *vis)
 	int				x2, stop4;
 	fixed_t			xiscale;
 	ESPSResult		mode;
+	bool			ispsprite = (!vis->sector && !vis->gx && !vis->gy && !vis->gz);
 
 	if (vis->xscale == 0 || vis->yscale == 0)
 	{ // scaled to 0; can't see
@@ -393,7 +437,8 @@ void R_DrawVisSprite (vissprite_t *vis)
 			while ((dc_x < stop4) && (dc_x & 3))
 			{
 				pixels = tex->GetColumn (frac >> FRACBITS, &spans);
-				R_DrawMaskedColumn (pixels, spans);
+				if (ispsprite || !R_ClipSpriteColumnWithPortals(vis->gx, vis->gy, vis))
+					R_DrawMaskedColumn (pixels, spans);
 				dc_x++;
 				frac += xiscale;
 			}
@@ -404,7 +449,8 @@ void R_DrawVisSprite (vissprite_t *vis)
 				for (int zz = 4; zz; --zz)
 				{
 					pixels = tex->GetColumn (frac >> FRACBITS, &spans);
-					R_DrawMaskedColumnHoriz (pixels, spans);
+					if (ispsprite || !R_ClipSpriteColumnWithPortals(vis->gx, vis->gy, vis))
+						R_DrawMaskedColumnHoriz (pixels, spans);
 					dc_x++;
 					frac += xiscale;
 				}
@@ -414,7 +460,8 @@ void R_DrawVisSprite (vissprite_t *vis)
 			while (dc_x < x2)
 			{
 				pixels = tex->GetColumn (frac >> FRACBITS, &spans);
-				R_DrawMaskedColumn (pixels, spans);
+				if (ispsprite || !R_ClipSpriteColumnWithPortals(vis->gx, vis->gy, vis))
+					R_DrawMaskedColumn (pixels, spans);
 				dc_x++;
 				frac += xiscale;
 			}
@@ -524,7 +571,8 @@ void R_DrawWallSprite(vissprite_t *spr)
 			{ // calculate lighting
 				dc_colormap = usecolormap->Maps + (GETPALOOKUP (rw_light, shade) << COLORMAPSHIFT);
 			}
-			R_WallSpriteColumn(R_DrawMaskedColumn);
+			if (!R_ClipSpriteColumnWithPortals(spr->gx, spr->gy, spr))
+				R_WallSpriteColumn(R_DrawMaskedColumn);
 			dc_x++;
 		}
 
@@ -537,7 +585,8 @@ void R_DrawWallSprite(vissprite_t *spr)
 			rt_initcols();
 			for (int zz = 4; zz; --zz)
 			{
-				R_WallSpriteColumn(R_DrawMaskedColumnHoriz);
+				if (!R_ClipSpriteColumnWithPortals(spr->gx, spr->gy, spr))
+					R_WallSpriteColumn(R_DrawMaskedColumnHoriz);
 				dc_x++;
 			}
 			rt_draw4cols(dc_x - 4);
@@ -549,7 +598,8 @@ void R_DrawWallSprite(vissprite_t *spr)
 			{ // calculate lighting
 				dc_colormap = usecolormap->Maps + (GETPALOOKUP (rw_light, shade) << COLORMAPSHIFT);
 			}
-			R_WallSpriteColumn(R_DrawMaskedColumn);
+			if (!R_ClipSpriteColumnWithPortals(spr->gx, spr->gy, spr))
+				R_WallSpriteColumn(R_DrawMaskedColumn);
 			dc_x++;
 		}
 	}
@@ -687,6 +737,11 @@ void R_ProjectSprite (AActor *thing, int fakeside, F3DFloor *fakefloor, F3DFloor
 		return;
 	}
 
+	// [ZZ] Or less definitely not visible (hue)
+	// [ZZ] 10.01.2016: don't try to clip stuff inside a skybox against the current portal.
+	if (!CurrentPortalInSkybox && CurrentPortal && !!P_PointOnLineSide(thing->X(), thing->Y(), CurrentPortal->dst))
+		return;
+
 	// [RH] Interpolate the sprite's position to make it look smooth
 	fixedvec3 pos = thing->InterpolatedPosition(r_TicFrac);
 	fx = pos.x;
@@ -912,6 +967,7 @@ void R_ProjectSprite (AActor *thing, int fakeside, F3DFloor *fakefloor, F3DFloor
 		// store information in a vissprite
 		vis = R_NewVisSprite();
 
+		vis->CurrentPortalUniq = CurrentPortalUniq;
 		vis->xscale = xscale;
 		vis->yscale = Scale(InvZtoScale, yscale, tz << 4);
 		vis->idepth = (unsigned)DivScale32(1, tz) >> 1;	// tz is 20.12, so idepth ought to be 12.20, but signed math makes it 13.19
@@ -939,6 +995,7 @@ void R_ProjectSprite (AActor *thing, int fakeside, F3DFloor *fakefloor, F3DFloor
 	{
 		vis = R_NewVisSprite();
 
+		vis->CurrentPortalUniq = CurrentPortalUniq;
 		vis->xscale = xscale;
 		vis->yscale = yscale;
 		vis->x1 = WindowLeft;
@@ -1101,6 +1158,7 @@ static void R_ProjectWallSprite(AActor *thing, fixed_t fx, fixed_t fy, fixed_t f
 	gzb = fz + yscale * scaled_bo;
 
 	vis = R_NewVisSprite();
+	vis->CurrentPortalUniq = CurrentPortalUniq;
 	vis->x1 = wallc.sx1 < WindowLeft ? WindowLeft : wallc.sx1;
 	vis->x2 = wallc.sx2 >= WindowRight ? WindowRight : wallc.sx2;
 	vis->yscale = yscale;
@@ -1801,7 +1859,6 @@ void R_SortVisSprites (bool (*compare)(vissprite_t *, vissprite_t *), size_t fir
 	std::stable_sort(&spritesorter[0], &spritesorter[vsprcount], compare);
 }
 
-
 //
 // R_DrawSprite
 //
@@ -2096,8 +2153,13 @@ void R_DrawSprite (vissprite_t *spr)
 
 	for (ds = ds_p; ds-- > firstdrawseg; )  // new -- killough
 	{
+		// [ZZ] portal handling here
+		//if (ds->CurrentPortalUniq != spr->CurrentPortalUniq)
+		//	continue;
+		// [ZZ] WARNING: uncommenting the two above lines, totally breaks sprite clipping
+
 		// kg3D - no clipping on fake segs
-		if(ds->fake) continue;
+		if (ds->fake) continue;
 		// determine if the drawseg obscures the sprite
 		if (ds->x1 >= x2 || ds->x2 <= x1 ||
 			(!(ds->silhouette & SIL_BOTH) && ds->maskedtexturecol == -1 &&
@@ -2128,7 +2190,8 @@ void R_DrawSprite (vissprite_t *spr)
 						ds->curline->v1->x - spr->gx, ds->curline->v2->y - ds->curline->v1->y) <= 0))
 		{
 			// seg is behind sprite, so draw the mid texture if it has one
-			if (ds->maskedtexturecol != -1 || ds->bFogBoundary)
+			if (ds->CurrentPortalUniq == CurrentPortalUniq && // [ZZ] instead, portal uniq check is made here
+				(ds->maskedtexturecol != -1 || ds->bFogBoundary))
 				R_RenderMaskedSegRange (ds, r1, r2);
 			continue;
 		}
@@ -2232,6 +2295,8 @@ void R_DrawMaskedSingle (bool renew)
 
 	for (i = vsprcount; i > 0; i--)
 	{
+		if (spritesorter[i-1]->CurrentPortalUniq != CurrentPortalUniq)
+			continue; // probably another time
 		R_DrawSprite (spritesorter[i-1]);
 	}
 
@@ -2249,6 +2314,9 @@ void R_DrawMaskedSingle (bool renew)
 	}
 	for (ds = ds_p; ds-- > firstdrawseg; )	// new -- killough
 	{
+		// [ZZ] the same as above
+		if (ds->CurrentPortalUniq != CurrentPortalUniq)
+			continue;
 		// kg3D - no fake segs
 		if (ds->fake) continue;
 		if (ds->maskedtexturecol != -1 || ds->bFogBoundary)
@@ -2328,6 +2396,10 @@ void R_ProjectParticle (particle_t *particle, const sector_t *sector, int shade,
 	sector_t*			heightsec = NULL;
 	BYTE*				map;
 
+	// [ZZ] Particle not visible through the portal plane
+	if (CurrentPortal && !!P_PointOnLineSide(particle->x, particle->y, CurrentPortal->dst))
+		return;
+
 	// transform the origin point
 	tr_x = particle->x - viewx;
 	tr_y = particle->y - viewy;
@@ -2431,6 +2503,7 @@ void R_ProjectParticle (particle_t *particle, const sector_t *sector, int shade,
 
 	// store information in a vissprite
 	vis = R_NewVisSprite ();
+	vis->CurrentPortalUniq = CurrentPortalUniq;
 	vis->heightsec = heightsec;
 	vis->xscale = xscale;
 //	vis->yscale = FixedMul (xscale, InvZtoScale);
@@ -2491,7 +2564,9 @@ static void R_DrawMaskedSegsBehindParticle (const vissprite_t *vis)
 		}
 		if (Scale (ds->siz2 - ds->siz1, (x2 + x1)/2 - ds->sx1, ds->sx2 - ds->sx1) + ds->siz1 < vis->idepth)
 		{
-			R_RenderMaskedSegRange (ds, MAX<int>(ds->x1, x1), MIN<int>(ds->x2, x2));
+			// [ZZ] only draw stuff that's inside the same portal as the particle, other portals will care for themselves
+			if (ds->CurrentPortalUniq == vis->CurrentPortalUniq)
+				R_RenderMaskedSegRange (ds, MAX<int>(ds->x1, x1), MIN<int>(ds->x2, x2));
 		}
 	}
 }
@@ -2522,6 +2597,8 @@ void R_DrawParticle (vissprite_t *vis)
 		fg = fg2rgb[color];
 	}
 
+	/*
+
 	spacing = RenderTarget->GetPitch() - countbase;
 	dest = ylookup[yl] + x1 + dc_destorg;
 
@@ -2535,7 +2612,28 @@ void R_DrawParticle (vissprite_t *vis)
 			*dest++ = RGB32k.All[bg & (bg>>15)];
 		} while (--count);
 		dest += spacing;
-	} while (--ycount);
+	} while (--ycount);*/
+
+	// original was row-wise
+	// width = countbase
+	// height = ycount
+
+	spacing = RenderTarget->GetPitch();
+
+	for (int x = x1; x < (x1+countbase); x++)
+	{
+		dc_x = x;
+		if (R_ClipSpriteColumnWithPortals(vis->gx, vis->gy, vis))
+			continue;
+		dest = ylookup[yl] + x + dc_destorg;
+		for (int y = 0; y < ycount; y++)
+		{
+			DWORD bg = bg2rgb[*dest];
+			bg = (fg+bg) | 0x1f07c1f;
+			*dest = RGB32k.All[bg & (bg>>15)];
+			dest += spacing;
+		}
+	}
 }
 
 extern fixed_t baseyaspectmul;

src/r_things.h

@@ -80,6 +80,7 @@ struct vissprite_t
 	short 			renderflags;
 	DWORD			Translation;	// [RH] for color translation
 	visstyle_t		Style;
+	int				CurrentPortalUniq; // [ZZ] to identify the portal that this thing is in. used for clipping.
 };
 
 struct particle_t;

zdoom.vcproj

@@ -6944,6 +6944,18 @@
 				>
 			</File>
 		</Filter>
+		<Filter
+			Name="Portals"
+			>
+			<File
+				RelativePath=".\src\portal.cpp"
+				>
+			</File>
+			<File
+				RelativePath=".\src\portal.h"
+				>
+			</File>
+		</Filter>
 	</Files>
 	<Globals>
 	</Globals>