gzdoom-gles/libraries/opnmidi/wopn/wopn_file.h

251 lines
8.2 KiB
C
Raw Normal View History

Upgrade libADLMIDI and libOPNMIDI Added full-panning stereo, improvement of channel management, and many other things. Also, I have implemented an ability to use custom WOPL (for libADLMIDI) and WOPN (for libOPNMIDI) banks from the same path as "soundfonts", but also, in the same environment, the "fm_banks" folder was added for WOPL/WOPN storing purposes. To toggle usage of embedded or custom bank, I have added togglable booleans. When bank fails to be loaded, the default embedded bank is getting to be used as fallback. ADLMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Fixed correctness of CMF files playing * Fixed unnecessary overuse of chip channels by blank notes * Added API to disable specific MIDI tracks or play one of MIDI tracks solo * Added support for more complex loop (loopStart=XX, loopEnd=0). Where XX - count of loops, or 0 - infinite. Nested loops are supported without of any limits. * Added working implementation of TMB's velocity offset * Added support for full-panning stereo option (Thanks to [Christopher Snowhill](https://github.com/kode54) for a work!) * Fixed inability to play high notes due physical tone frequency out of range on the OPL3 chip OPNMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Resolved a trouble which sometimes makes a junk noise sound and unnecessary overuse of chip channels * Volume models support taken from libADLMIDI has been adapted to OPN2's chip speficis * Fixed inability to play high notes due physical tone frequency out of range on the OPN2 chip * Added support for full-panning stereo option ADL&OPN Hotfix: re-calculated default banks The fix on side of measurer of OPL3-BE and OPN2-BE where some instruments getting zero releasing time.
2018-10-01 21:07:05 +00:00
/*
* Wohlstand's OPN2 Bank File - a bank format to store OPN2 timbre data and setup
*
* Copyright (c) 2018 Vitaly Novichkov <admin@wohlnet.ru>
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation the
* rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included
* in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
* IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*/
#ifndef WOPN_FILE_H
#define WOPN_FILE_H
#include <stdint.h>
#include <stddef.h>
#ifdef __cplusplus
extern "C" {
#endif
#if !defined(__STDC_VERSION__) || (defined(__STDC_VERSION__) && (__STDC_VERSION__ < 199901L)) \
|| defined(__STRICT_ANSI__) || !defined(__cplusplus)
typedef signed char int8_t;
typedef unsigned char uint8_t;
typedef signed short int int16_t;
typedef unsigned short int uint16_t;
#endif
/* Volume scaling model implemented in the libOPNMIDI */
typedef enum WOPN_VolumeModel
{
WOPN_VM_Generic = 0
} WOPN_VolumeModel;
typedef enum WOPN_InstrumentFlags
{
/* Is pseudo eight-operator (two 4-operator voices) instrument */
WOPN_Ins_Pseudo8op = 0x01,
/* Is a blank instrument entry */
WOPN_Ins_IsBlank = 0x02,
/* Mask of the flags range */
WOPN_Ins_ALL_MASK = 0x03
} WOPN_InstrumentFlags;
/* Error codes */
typedef enum WOPN_ErrorCodes
{
WOPN_ERR_OK = 0,
/* Magic number is not maching */
WOPN_ERR_BAD_MAGIC,
/* Too short file */
WOPN_ERR_UNEXPECTED_ENDING,
/* Zero banks count */
WOPN_ERR_INVALID_BANKS_COUNT,
/* Version of file is newer than supported by current version of library */
WOPN_ERR_NEWER_VERSION,
/* Out of memory */
WOPN_ERR_OUT_OF_MEMORY,
/* Given null pointer memory data */
WOPN_ERR_NULL_POINTER
} WOPN_ErrorCodes;
/* OPN2 Oerators data */
typedef struct WOPNOperator
{
/* Detune and frequency multiplication register data */
uint8_t dtfm_30;
/* Total level register data */
uint8_t level_40;
/* Rate scale and attack register data */
uint8_t rsatk_50;
/* Amplitude modulation enable and Decay-1 register data */
uint8_t amdecay1_60;
/* Decay-2 register data */
uint8_t decay2_70;
/* Sustain and Release register data */
uint8_t susrel_80;
/* SSG-EG register data */
uint8_t ssgeg_90;
} WOPNOperator;
/* Instrument entry */
typedef struct WOPNInstrument
{
/* Title of the instrument */
char inst_name[34];
/* MIDI note key (half-tone) offset for an instrument (or a first voice in pseudo-4-op mode) */
int16_t note_offset;
/* Reserved */
int8_t midi_velocity_offset;
/* Percussion MIDI base tone number at which this drum will be played */
uint8_t percussion_key_number;
/* Enum WOPN_InstrumentFlags */
uint8_t inst_flags;
/* Feedback and Algorithm register data */
uint8_t fbalg;
/* LFO Sensitivity register data */
uint8_t lfosens;
/* Operators register data */
WOPNOperator operators[4];
/* Millisecond delay of sounding while key is on */
uint16_t delay_on_ms;
/* Millisecond delay of sounding after key off */
uint16_t delay_off_ms;
} WOPNInstrument;
/* Bank entry */
typedef struct WOPNBank
{
/* Name of bank */
char bank_name[33];
/* MIDI Bank LSB code */
uint8_t bank_midi_lsb;
/* MIDI Bank MSB code */
uint8_t bank_midi_msb;
/* Instruments data of this bank */
WOPNInstrument ins[128];
} WOPNBank;
/* Instrument data file */
typedef struct OPNIFile
{
/* Version of instrument file */
uint16_t version;
/* Is this a percussion instrument */
uint8_t is_drum;
/* Instrument data */
WOPNInstrument inst;
} OPNIFile;
/* Bank data file */
typedef struct WOPNFile
{
/* Version of bank file */
uint16_t version;
/* Count of melodic banks in this file */
uint16_t banks_count_melodic;
/* Count of percussion banks in this file */
uint16_t banks_count_percussion;
/* Chip global LFO enable flag and frequency register data */
uint8_t lfo_freq;
/* Reserved (Enum WOPN_VolumeModel) */
uint8_t volume_model;
/* dynamically allocated data Melodic banks array */
WOPNBank *banks_melodic;
/* dynamically allocated data Percussive banks array */
WOPNBank *banks_percussive;
} WOPNFile;
/**
* @brief Initialize blank WOPN data structure with allocated bank data
* @param melodic_banks Count of melodic banks
* @param percussive_banks Count of percussive banks
* @return pointer to heap-allocated WOPN data structure or NULL when out of memory or incorrectly given banks counts
*/
extern WOPNFile *WOPN_Init(uint16_t melodic_banks, uint16_t percussive_banks);
/**
* @brief Clean up WOPN data file (all allocated bank arrays will be fried too)
* @param file pointer to heap-allocated WOPN data structure
*/
extern void WOPN_Free(WOPNFile *file);
/**
* @brief Compare two bank entries
* @param bank1 First bank
* @param bank2 Second bank
* @return 1 if banks are equal or 0 if there are different
*/
extern int WOPN_BanksCmp(const WOPNFile *bank1, const WOPNFile *bank2);
/**
* @brief Load WOPN bank file from the memory.
* WOPN data structure will be allocated. (don't forget to clear it with WOPN_Free() after use!)
* @param mem Pointer to memory block contains raw WOPN bank file data
* @param length Length of given memory block
* @param error pointer to integer to return an error code. Pass NULL if you don't want to use error codes.
* @return Heap-allocated WOPN file data structure or NULL if any error has occouped
*/
extern WOPNFile *WOPN_LoadBankFromMem(void *mem, size_t length, int *error);
/**
* @brief Load WOPI instrument file from the memory.
* You must allocate OPNIFile structure by yourself and give the pointer to it.
* @param file Pointer to destinition OPNIFile structure to fill it with parsed data.
* @param mem Pointer to memory block contains raw WOPI instrument file data
* @param length Length of given memory block
* @return 0 if no errors occouped, or an error code of WOPN_ErrorCodes enumeration
*/
extern int WOPN_LoadInstFromMem(OPNIFile *file, void *mem, size_t length);
/**
* @brief Calculate the size of the output memory block
* @param file Heap-allocated WOPN file data structure
* @param version Destinition version of the file
* @return Size of the raw WOPN file data
*/
extern size_t WOPN_CalculateBankFileSize(WOPNFile *file, uint16_t version);
/**
* @brief Calculate the size of the output memory block
* @param file Pointer to WOPI file data structure
* @param version Destinition version of the file
* @return Size of the raw WOPI file data
*/
extern size_t WOPN_CalculateInstFileSize(OPNIFile *file, uint16_t version);
/**
* @brief Write raw WOPN into given memory block
* @param file Heap-allocated WOPN file data structure
* @param dest_mem Destinition memory block pointer
* @param length Length of destinition memory block
* @param version Wanted WOPN version
* @param force_gm Force GM set in saved bank file
* @return Error code or 0 on success
*/
extern int WOPN_SaveBankToMem(WOPNFile *file, void *dest_mem, size_t length, uint16_t version, uint16_t force_gm);
/**
* @brief Write raw WOPI into given memory block
* @param file Pointer to WOPI file data structure
* @param dest_mem Destinition memory block pointer
* @param length Length of destinition memory block
* @param version Wanted WOPI version
* @return Error code or 0 on success
*/
extern int WOPN_SaveInstToMem(OPNIFile *file, void *dest_mem, size_t length, uint16_t version);
#ifdef __cplusplus
}
#endif
#endif /* WOPN_FILE_H */