gzdoom-gles/src/sdl/st_start.cpp

355 lines
10 KiB
C++
Raw Normal View History

/*
** st_start.cpp
** Handles the startup screen.
**
**---------------------------------------------------------------------------
** Copyright 2006-2007 Randy Heit
** All rights reserved.
**
** Redistribution and use in source and binary forms, with or without
** modification, are permitted provided that the following conditions
** are met:
**
** 1. Redistributions of source code must retain the above copyright
** notice, this list of conditions and the following disclaimer.
** 2. Redistributions in binary form must reproduce the above copyright
** notice, this list of conditions and the following disclaimer in the
** documentation and/or other materials provided with the distribution.
** 3. The name of the author may not be used to endorse or promote products
** derived from this software without specific prior written permission.
**
** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
**---------------------------------------------------------------------------
**
*/
// HEADER FILES ------------------------------------------------------------
#include <unistd.h>
#include <sys/time.h>
#include <sys/types.h>
#include <termios.h>
#include "st_start.h"
#include "doomdef.h"
#include "i_system.h"
2008-09-19 07:10:14 +00:00
#include "c_cvars.h"
// MACROS ------------------------------------------------------------------
// TYPES -------------------------------------------------------------------
class FTTYStartupScreen : public FStartupScreen
{
public:
FTTYStartupScreen(int max_progress);
~FTTYStartupScreen();
void Progress();
void NetInit(const char *message, int num_players);
void NetProgress(int count);
void NetMessage(const char *format, ...); // cover for printf
void NetDone();
bool NetLoop(bool (*timer_callback)(void *), void *userdata);
protected:
bool DidNetInit;
int NetMaxPos, NetCurPos;
const char *TheNetMessage;
termios OldTermIOS;
};
// EXTERNAL FUNCTION PROTOTYPES --------------------------------------------
// PUBLIC FUNCTION PROTOTYPES ----------------------------------------------
void I_ShutdownJoysticks();
// PRIVATE FUNCTION PROTOTYPES ---------------------------------------------
static void DeleteStartupScreen();
// EXTERNAL DATA DECLARATIONS ----------------------------------------------
// PUBLIC DATA DEFINITIONS -------------------------------------------------
FStartupScreen *StartScreen;
CUSTOM_CVAR(Int, showendoom, 0, CVAR_ARCHIVE|CVAR_GLOBALCONFIG)
{
if (self < 0) self = 0;
else if (self > 2) self=2;
}
// PRIVATE DATA DEFINITIONS ------------------------------------------------
static const char SpinnyProgressChars[4] = { '|', '/', '-', '\\' };
// CODE --------------------------------------------------------------------
//==========================================================================
//
// FStartupScreen :: CreateInstance
//
// Initializes the startup screen for the detected game.
// Sets the size of the progress bar and displays the startup screen.
//
//==========================================================================
FStartupScreen *FStartupScreen::CreateInstance(int max_progress)
{
atterm(DeleteStartupScreen);
return new FTTYStartupScreen(max_progress);
}
//===========================================================================
//
// DeleteStartupScreen
//
// Makes sure the startup screen has been deleted before quitting.
//
//===========================================================================
void DeleteStartupScreen()
{
if (StartScreen != NULL)
{
delete StartScreen;
StartScreen = NULL;
}
}
//===========================================================================
//
// FTTYStartupScreen Constructor
//
// Sets the size of the progress bar and displays the startup screen.
//
//===========================================================================
Note: I have not tried compiling these recent changes under Linux. I wouldn't be surprised if it doesn't work. - Reorganized the network startup loops so now they are event driven. There is a single function that gets called to drive it, and it uses callbacks to perform the different stages of the synchronization. This lets me have a nice, responsive abort button instead of the previous unannounced hit-escape-to- abort behavior, and I think the rearranged code is slightly easier to understand too. - Increased the number of bytes for version info during D_ArbitrateNetStart(), in preparation for the day when NETGAMEVERSION requires more than one byte. - I noticed an issue with Vista RC1 and the new fatal error setup. Even after releasing a DirectDraw or Direct3D interface, the DWM can still use the last image drawn using them when it composites the window. It doesn't always do it but it does often enough that it is a real problem. At this point, I don't know if it's a problem with the release version of Vista or not. After messing around, I discovered the problem was caused by ~Win32Video() hiding the window and then having it immediately shown soon after. The DWM kept an image of the window to do the transition effect with, and then when it didn't get a chance to do the transition, it didn't properly forget about its saved image and kept plastering it on top of everything else underneath. - Added a network synchronization panel to the window during netgame startup. - Fixed: PClass::CreateDerivedClass() must initialize StateList to NULL. Otherwise, classic DECORATE definitions generate a big, fat crash. - Resurrected the R_Init progress bar, now as a standard Windows control. - Removed the sound failure dialog. The FMOD setup already defaulted to no sound if initialization failed, so this only applies when snd_output is set to "alternate" which now also falls back to no sound. In addition, it wasn't working right, and I didn't feel like fixing it for the probably 0% of users it affected. - Fixed: The edit control used for logging output added text in reverse order on Win9x. - Went back to the roots and made graphics initialization one of the last things to happen during setup. Now the startup text is visible again. More importantly, the main window is no longer created invisible, which seems to cause trouble with it not always appearing in the taskbar. The fatal error dialog is now also embedded in the main window instead of being a separate modal dialog, so you can play with the log window to see any problems that might be reported there. Rather than completely restoring the original startup order, I tried to keep things as close to the way they were with early graphics startup. In particular, V_Init() now creates a dummy screen so that things that need screen dimensions can get them. It gets replaced by the real screen later in I_InitGraphics(). Will need to check this under Linux to make sure it didn't cause any problems there. - Removed the following stubs that just called functions in Video: - I_StartModeIterator() - I_NextMode() - I_DisplayType() I_FullscreenChanged() was also removed, and a new fullscreen parameter was added to IVideo::StartModeIterator(), since that's all it controlled. - Renamed I_InitHardware() back to I_InitGraphics(), since that's all it's initialized post-1.22. SVN r416 (trunk)
2006-12-19 04:09:10 +00:00
FTTYStartupScreen::FTTYStartupScreen(int max_progress)
: FStartupScreen(max_progress)
{
DidNetInit = false;
NetMaxPos = 0;
NetCurPos = 0;
TheNetMessage = NULL;
}
//===========================================================================
//
// FTTYStartupScreen Destructor
//
// Called just before entering graphics mode to deconstruct the startup
// screen.
//
//===========================================================================
Note: I have not tried compiling these recent changes under Linux. I wouldn't be surprised if it doesn't work. - Reorganized the network startup loops so now they are event driven. There is a single function that gets called to drive it, and it uses callbacks to perform the different stages of the synchronization. This lets me have a nice, responsive abort button instead of the previous unannounced hit-escape-to- abort behavior, and I think the rearranged code is slightly easier to understand too. - Increased the number of bytes for version info during D_ArbitrateNetStart(), in preparation for the day when NETGAMEVERSION requires more than one byte. - I noticed an issue with Vista RC1 and the new fatal error setup. Even after releasing a DirectDraw or Direct3D interface, the DWM can still use the last image drawn using them when it composites the window. It doesn't always do it but it does often enough that it is a real problem. At this point, I don't know if it's a problem with the release version of Vista or not. After messing around, I discovered the problem was caused by ~Win32Video() hiding the window and then having it immediately shown soon after. The DWM kept an image of the window to do the transition effect with, and then when it didn't get a chance to do the transition, it didn't properly forget about its saved image and kept plastering it on top of everything else underneath. - Added a network synchronization panel to the window during netgame startup. - Fixed: PClass::CreateDerivedClass() must initialize StateList to NULL. Otherwise, classic DECORATE definitions generate a big, fat crash. - Resurrected the R_Init progress bar, now as a standard Windows control. - Removed the sound failure dialog. The FMOD setup already defaulted to no sound if initialization failed, so this only applies when snd_output is set to "alternate" which now also falls back to no sound. In addition, it wasn't working right, and I didn't feel like fixing it for the probably 0% of users it affected. - Fixed: The edit control used for logging output added text in reverse order on Win9x. - Went back to the roots and made graphics initialization one of the last things to happen during setup. Now the startup text is visible again. More importantly, the main window is no longer created invisible, which seems to cause trouble with it not always appearing in the taskbar. The fatal error dialog is now also embedded in the main window instead of being a separate modal dialog, so you can play with the log window to see any problems that might be reported there. Rather than completely restoring the original startup order, I tried to keep things as close to the way they were with early graphics startup. In particular, V_Init() now creates a dummy screen so that things that need screen dimensions can get them. It gets replaced by the real screen later in I_InitGraphics(). Will need to check this under Linux to make sure it didn't cause any problems there. - Removed the following stubs that just called functions in Video: - I_StartModeIterator() - I_NextMode() - I_DisplayType() I_FullscreenChanged() was also removed, and a new fullscreen parameter was added to IVideo::StartModeIterator(), since that's all it controlled. - Renamed I_InitHardware() back to I_InitGraphics(), since that's all it's initialized post-1.22. SVN r416 (trunk)
2006-12-19 04:09:10 +00:00
FTTYStartupScreen::~FTTYStartupScreen()
{
NetDone(); // Just in case it wasn't called yet and needs to be.
}
//===========================================================================
//
// FTTYStartupScreen :: Progress
//
// If there was a progress bar, this would move it. But the basic TTY
// startup screen doesn't have one, so this function does nothing.
//
//===========================================================================
Note: I have not tried compiling these recent changes under Linux. I wouldn't be surprised if it doesn't work. - Reorganized the network startup loops so now they are event driven. There is a single function that gets called to drive it, and it uses callbacks to perform the different stages of the synchronization. This lets me have a nice, responsive abort button instead of the previous unannounced hit-escape-to- abort behavior, and I think the rearranged code is slightly easier to understand too. - Increased the number of bytes for version info during D_ArbitrateNetStart(), in preparation for the day when NETGAMEVERSION requires more than one byte. - I noticed an issue with Vista RC1 and the new fatal error setup. Even after releasing a DirectDraw or Direct3D interface, the DWM can still use the last image drawn using them when it composites the window. It doesn't always do it but it does often enough that it is a real problem. At this point, I don't know if it's a problem with the release version of Vista or not. After messing around, I discovered the problem was caused by ~Win32Video() hiding the window and then having it immediately shown soon after. The DWM kept an image of the window to do the transition effect with, and then when it didn't get a chance to do the transition, it didn't properly forget about its saved image and kept plastering it on top of everything else underneath. - Added a network synchronization panel to the window during netgame startup. - Fixed: PClass::CreateDerivedClass() must initialize StateList to NULL. Otherwise, classic DECORATE definitions generate a big, fat crash. - Resurrected the R_Init progress bar, now as a standard Windows control. - Removed the sound failure dialog. The FMOD setup already defaulted to no sound if initialization failed, so this only applies when snd_output is set to "alternate" which now also falls back to no sound. In addition, it wasn't working right, and I didn't feel like fixing it for the probably 0% of users it affected. - Fixed: The edit control used for logging output added text in reverse order on Win9x. - Went back to the roots and made graphics initialization one of the last things to happen during setup. Now the startup text is visible again. More importantly, the main window is no longer created invisible, which seems to cause trouble with it not always appearing in the taskbar. The fatal error dialog is now also embedded in the main window instead of being a separate modal dialog, so you can play with the log window to see any problems that might be reported there. Rather than completely restoring the original startup order, I tried to keep things as close to the way they were with early graphics startup. In particular, V_Init() now creates a dummy screen so that things that need screen dimensions can get them. It gets replaced by the real screen later in I_InitGraphics(). Will need to check this under Linux to make sure it didn't cause any problems there. - Removed the following stubs that just called functions in Video: - I_StartModeIterator() - I_NextMode() - I_DisplayType() I_FullscreenChanged() was also removed, and a new fullscreen parameter was added to IVideo::StartModeIterator(), since that's all it controlled. - Renamed I_InitHardware() back to I_InitGraphics(), since that's all it's initialized post-1.22. SVN r416 (trunk)
2006-12-19 04:09:10 +00:00
void FTTYStartupScreen::Progress()
{
}
//===========================================================================
//
// FTTYStartupScreen :: NetInit
//
// Sets stdin for unbuffered I/O, displays the given message, and shows
// a progress meter.
//
//===========================================================================
Note: I have not tried compiling these recent changes under Linux. I wouldn't be surprised if it doesn't work. - Reorganized the network startup loops so now they are event driven. There is a single function that gets called to drive it, and it uses callbacks to perform the different stages of the synchronization. This lets me have a nice, responsive abort button instead of the previous unannounced hit-escape-to- abort behavior, and I think the rearranged code is slightly easier to understand too. - Increased the number of bytes for version info during D_ArbitrateNetStart(), in preparation for the day when NETGAMEVERSION requires more than one byte. - I noticed an issue with Vista RC1 and the new fatal error setup. Even after releasing a DirectDraw or Direct3D interface, the DWM can still use the last image drawn using them when it composites the window. It doesn't always do it but it does often enough that it is a real problem. At this point, I don't know if it's a problem with the release version of Vista or not. After messing around, I discovered the problem was caused by ~Win32Video() hiding the window and then having it immediately shown soon after. The DWM kept an image of the window to do the transition effect with, and then when it didn't get a chance to do the transition, it didn't properly forget about its saved image and kept plastering it on top of everything else underneath. - Added a network synchronization panel to the window during netgame startup. - Fixed: PClass::CreateDerivedClass() must initialize StateList to NULL. Otherwise, classic DECORATE definitions generate a big, fat crash. - Resurrected the R_Init progress bar, now as a standard Windows control. - Removed the sound failure dialog. The FMOD setup already defaulted to no sound if initialization failed, so this only applies when snd_output is set to "alternate" which now also falls back to no sound. In addition, it wasn't working right, and I didn't feel like fixing it for the probably 0% of users it affected. - Fixed: The edit control used for logging output added text in reverse order on Win9x. - Went back to the roots and made graphics initialization one of the last things to happen during setup. Now the startup text is visible again. More importantly, the main window is no longer created invisible, which seems to cause trouble with it not always appearing in the taskbar. The fatal error dialog is now also embedded in the main window instead of being a separate modal dialog, so you can play with the log window to see any problems that might be reported there. Rather than completely restoring the original startup order, I tried to keep things as close to the way they were with early graphics startup. In particular, V_Init() now creates a dummy screen so that things that need screen dimensions can get them. It gets replaced by the real screen later in I_InitGraphics(). Will need to check this under Linux to make sure it didn't cause any problems there. - Removed the following stubs that just called functions in Video: - I_StartModeIterator() - I_NextMode() - I_DisplayType() I_FullscreenChanged() was also removed, and a new fullscreen parameter was added to IVideo::StartModeIterator(), since that's all it controlled. - Renamed I_InitHardware() back to I_InitGraphics(), since that's all it's initialized post-1.22. SVN r416 (trunk)
2006-12-19 04:09:10 +00:00
void FTTYStartupScreen::NetInit(const char *message, int numplayers)
{
if (!DidNetInit)
{
termios rawtermios;
fprintf (stderr, "Press 'Q' to abort network game synchronization.");
// Set stdin to raw mode so we can get keypresses in ST_CheckNetAbort()
// immediately without waiting for an EOL.
tcgetattr (STDIN_FILENO, &OldTermIOS);
rawtermios = OldTermIOS;
rawtermios.c_lflag &= ~(ICANON | ECHO);
tcsetattr (STDIN_FILENO, TCSANOW, &rawtermios);
DidNetInit = true;
}
if (numplayers == 1)
{
// Status message without any real progress info.
fprintf (stderr, "\n%s.", message);
}
else
{
fprintf (stderr, "\n%s: ", message);
}
fflush (stderr);
TheNetMessage = message;
NetMaxPos = numplayers;
NetCurPos = 0;
NetProgress(1); // You always know about yourself
}
//===========================================================================
//
// FTTYStartupScreen :: NetDone
//
// Restores the old stdin tty settings.
//
//===========================================================================
void FTTYStartupScreen::NetDone()
{
// Restore stdin settings
if (DidNetInit)
{
tcsetattr (STDIN_FILENO, TCSANOW, &OldTermIOS);
printf ("\n");
DidNetInit = false;
}
}
//===========================================================================
//
// FTTYStartupScreen :: NetMessage
//
// Call this between NetInit() and NetDone() instead of Printf() to
// display messages, because the progress meter is mixed in the same output
// stream as normal messages.
//
//===========================================================================
void FTTYStartupScreen::NetMessage(const char *format, ...)
{
FString str;
va_list argptr;
va_start (argptr, format);
str.VFormat (format, argptr);
va_end (argptr);
fprintf (stderr, "\r%-40s\n", str.GetChars());
}
//===========================================================================
//
// FTTYStartupScreen :: NetProgress
//
// Sets the network progress meter. If count is 0, it gets bumped by 1.
// Otherwise, it is set to count.
//
//===========================================================================
Note: I have not tried compiling these recent changes under Linux. I wouldn't be surprised if it doesn't work. - Reorganized the network startup loops so now they are event driven. There is a single function that gets called to drive it, and it uses callbacks to perform the different stages of the synchronization. This lets me have a nice, responsive abort button instead of the previous unannounced hit-escape-to- abort behavior, and I think the rearranged code is slightly easier to understand too. - Increased the number of bytes for version info during D_ArbitrateNetStart(), in preparation for the day when NETGAMEVERSION requires more than one byte. - I noticed an issue with Vista RC1 and the new fatal error setup. Even after releasing a DirectDraw or Direct3D interface, the DWM can still use the last image drawn using them when it composites the window. It doesn't always do it but it does often enough that it is a real problem. At this point, I don't know if it's a problem with the release version of Vista or not. After messing around, I discovered the problem was caused by ~Win32Video() hiding the window and then having it immediately shown soon after. The DWM kept an image of the window to do the transition effect with, and then when it didn't get a chance to do the transition, it didn't properly forget about its saved image and kept plastering it on top of everything else underneath. - Added a network synchronization panel to the window during netgame startup. - Fixed: PClass::CreateDerivedClass() must initialize StateList to NULL. Otherwise, classic DECORATE definitions generate a big, fat crash. - Resurrected the R_Init progress bar, now as a standard Windows control. - Removed the sound failure dialog. The FMOD setup already defaulted to no sound if initialization failed, so this only applies when snd_output is set to "alternate" which now also falls back to no sound. In addition, it wasn't working right, and I didn't feel like fixing it for the probably 0% of users it affected. - Fixed: The edit control used for logging output added text in reverse order on Win9x. - Went back to the roots and made graphics initialization one of the last things to happen during setup. Now the startup text is visible again. More importantly, the main window is no longer created invisible, which seems to cause trouble with it not always appearing in the taskbar. The fatal error dialog is now also embedded in the main window instead of being a separate modal dialog, so you can play with the log window to see any problems that might be reported there. Rather than completely restoring the original startup order, I tried to keep things as close to the way they were with early graphics startup. In particular, V_Init() now creates a dummy screen so that things that need screen dimensions can get them. It gets replaced by the real screen later in I_InitGraphics(). Will need to check this under Linux to make sure it didn't cause any problems there. - Removed the following stubs that just called functions in Video: - I_StartModeIterator() - I_NextMode() - I_DisplayType() I_FullscreenChanged() was also removed, and a new fullscreen parameter was added to IVideo::StartModeIterator(), since that's all it controlled. - Renamed I_InitHardware() back to I_InitGraphics(), since that's all it's initialized post-1.22. SVN r416 (trunk)
2006-12-19 04:09:10 +00:00
void FTTYStartupScreen::NetProgress(int count)
{
int i;
if (count == 0)
{
NetCurPos++;
}
else if (count > 0)
{
NetCurPos = count;
}
if (NetMaxPos == 0)
{
// Spinny-type progress meter, because we're a guest waiting for the host.
fprintf (stderr, "\r%s: %c", TheNetMessage, SpinnyProgressChars[NetCurPos & 3]);
fflush (stderr);
}
else if (NetMaxPos > 1)
{
// Dotty-type progress meter.
fprintf (stderr, "\r%s: ", TheNetMessage);
for (i = 0; i < NetCurPos; ++i)
{
fputc ('.', stderr);
}
fprintf (stderr, "%*c[%2d/%2d]", NetMaxPos + 1 - NetCurPos, ' ', NetCurPos, NetMaxPos);
fflush (stderr);
}
}
//===========================================================================
//
// FTTYStartupScreen :: NetLoop
//
// The timer_callback function is called at least two times per second
// and passed the userdata value. It should return true to stop the loop and
// return control to the caller or false to continue the loop.
//
// ST_NetLoop will return true if the loop was halted by the callback and
// false if the loop was halted because the user wants to abort the
// network synchronization.
//
//===========================================================================
Note: I have not tried compiling these recent changes under Linux. I wouldn't be surprised if it doesn't work. - Reorganized the network startup loops so now they are event driven. There is a single function that gets called to drive it, and it uses callbacks to perform the different stages of the synchronization. This lets me have a nice, responsive abort button instead of the previous unannounced hit-escape-to- abort behavior, and I think the rearranged code is slightly easier to understand too. - Increased the number of bytes for version info during D_ArbitrateNetStart(), in preparation for the day when NETGAMEVERSION requires more than one byte. - I noticed an issue with Vista RC1 and the new fatal error setup. Even after releasing a DirectDraw or Direct3D interface, the DWM can still use the last image drawn using them when it composites the window. It doesn't always do it but it does often enough that it is a real problem. At this point, I don't know if it's a problem with the release version of Vista or not. After messing around, I discovered the problem was caused by ~Win32Video() hiding the window and then having it immediately shown soon after. The DWM kept an image of the window to do the transition effect with, and then when it didn't get a chance to do the transition, it didn't properly forget about its saved image and kept plastering it on top of everything else underneath. - Added a network synchronization panel to the window during netgame startup. - Fixed: PClass::CreateDerivedClass() must initialize StateList to NULL. Otherwise, classic DECORATE definitions generate a big, fat crash. - Resurrected the R_Init progress bar, now as a standard Windows control. - Removed the sound failure dialog. The FMOD setup already defaulted to no sound if initialization failed, so this only applies when snd_output is set to "alternate" which now also falls back to no sound. In addition, it wasn't working right, and I didn't feel like fixing it for the probably 0% of users it affected. - Fixed: The edit control used for logging output added text in reverse order on Win9x. - Went back to the roots and made graphics initialization one of the last things to happen during setup. Now the startup text is visible again. More importantly, the main window is no longer created invisible, which seems to cause trouble with it not always appearing in the taskbar. The fatal error dialog is now also embedded in the main window instead of being a separate modal dialog, so you can play with the log window to see any problems that might be reported there. Rather than completely restoring the original startup order, I tried to keep things as close to the way they were with early graphics startup. In particular, V_Init() now creates a dummy screen so that things that need screen dimensions can get them. It gets replaced by the real screen later in I_InitGraphics(). Will need to check this under Linux to make sure it didn't cause any problems there. - Removed the following stubs that just called functions in Video: - I_StartModeIterator() - I_NextMode() - I_DisplayType() I_FullscreenChanged() was also removed, and a new fullscreen parameter was added to IVideo::StartModeIterator(), since that's all it controlled. - Renamed I_InitHardware() back to I_InitGraphics(), since that's all it's initialized post-1.22. SVN r416 (trunk)
2006-12-19 04:09:10 +00:00
bool FTTYStartupScreen::NetLoop(bool (*timer_callback)(void *), void *userdata)
{
fd_set rfds;
struct timeval tv;
int retval;
char k;
for (;;)
{
// Don't flood the network with packets on startup.
tv.tv_sec = 0;
tv.tv_usec = 500000;
FD_ZERO (&rfds);
FD_SET (STDIN_FILENO, &rfds);
retval = select (1, &rfds, NULL, NULL, &tv);
if (retval == -1)
{
// Error
}
else if (retval == 0)
{
if (timer_callback (userdata))
{
fputc ('\n', stderr);
return true;
}
}
else if (read (STDIN_FILENO, &k, 1) == 1)
{
// Check input on stdin
if (k == 'q' || k == 'Q')
{
fprintf (stderr, "\nNetwork game synchronization aborted.");
return false;
}
}
}
}
void ST_Endoom()
{
I_ShutdownJoysticks();
exit(0);
}