zdoom/gzdoom-gles
0
0
Fork 0
mirror of https://github.com/ZDoom/gzdoom-gles.git synced 2024-12-11 04:51:13 +00:00
Code Issues Projects Releases Packages Wiki Activity
gzdoom-gles/wadsrc_extra/static/iwadinfo.txt

659 lines
15 KiB
Text
Raw Normal View History

Normalize line endings
2016-03-01 15:47:10 +00:00
// Must be sorted in identification order (easiest to recognize first!)
- rewrite of the IWAD loading mechanism. The old code went through a list of predefined file names and looked each of them up in a list of predefined directories until it found a match. This made it nearly impossible to add custom IWAD support because the list of valid file names could not be extended. This has now been switched around to run a scan for matching files on each given directory. With this approach it can look for *.iwad and *.ipk3 as IWAD extensions as well and read an IWADINFO out of these files that can be added to the internal list of IWADs, making it finally possible to define custom IWADs without having to add them to the internal list. (This isn't fully tested yet so some errors may still occur.)
2017-08-19 17:30:48 +00:00
IWad
{
Name = "Rise Of The Wool Ball"
Autoname = "woolball.rotwb"
Game = "Doom"
Config = "WoolBall"
IWADName = "rotwb.wad"
Mapinfo = "mapinfo/doom2.txt"
MustContain = "E3M6", "B3DED", "WORLDMAP", "NUCLSKYM", "PLANETLE", "MEOWZEKI", "ZEKIINTR", "NOWAYBAC"
BannerColors = "32 54 43", "c6 dc d1"
}
- added identification for delaweare.wad to the list of supported IWADs.
2016-06-02 10:04:35 +00:00
IWad
{
Name = "Delaweare"
Autoname = "delaweare"
Game = "Doom"
Config = "Delaweare"
Mapinfo = "mapinfo/doom2.txt"
- rewrite of the IWAD loading mechanism. The old code went through a list of predefined file names and looked each of them up in a list of predefined directories until it found a match. This made it nearly impossible to add custom IWAD support because the list of valid file names could not be extended. This has now been switched around to run a scan for matching files on each given directory. With this approach it can look for *.iwad and *.ipk3 as IWAD extensions as well and read an IWADINFO out of these files that can be added to the internal list of IWADs, making it finally possible to define custom IWADs without having to add them to the internal list. (This isn't fully tested yet so some errors may still occur.)
2017-08-19 17:30:48 +00:00
IWADName = "delaweare.wad"
- added identification for delaweare.wad to the list of supported IWADs.
2016-06-02 10:04:35 +00:00
MustContain = "TITLEMAP", "ROVEA0", "GRLURD01", "SQOUI01"
BannerColors = "00 00 00", "ff ff ff"
}
Normalize line endings
2016-03-01 15:47:10 +00:00
IWad
{
Name = "The Adventures of Square"
Autoname = "square.square"
Game = "Doom"
Config = "Square"
- rewrite of the IWAD loading mechanism. The old code went through a list of predefined file names and looked each of them up in a list of predefined directories until it found a match. This made it nearly impossible to add custom IWAD support because the list of valid file names could not be extended. This has now been switched around to run a scan for matching files on each given directory. With this approach it can look for *.iwad and *.ipk3 as IWAD extensions as well and read an IWADINFO out of these files that can be added to the internal list of IWADs, making it finally possible to define custom IWADs without having to add them to the internal list. (This isn't fully tested yet so some errors may still occur.)
2017-08-19 17:30:48 +00:00
IWADName = "square.pk3"
Normalize line endings
2016-03-01 15:47:10 +00:00
Mapinfo = "mapinfo/mindefaults.txt"
MustContain = "SQU-IWAD", "E1A1"
BannerColors = "ff ff ff", "80 00 80"
}
IWad
{
Name = "The Adventures of Square (Square-ware)"
Autoname = "square.squareware"
Game = "Doom"
Config = "Square"
- rewrite of the IWAD loading mechanism. The old code went through a list of predefined file names and looked each of them up in a list of predefined directories until it found a match. This made it nearly impossible to add custom IWAD support because the list of valid file names could not be extended. This has now been switched around to run a scan for matching files on each given directory. With this approach it can look for *.iwad and *.ipk3 as IWAD extensions as well and read an IWADINFO out of these files that can be added to the internal list of IWADs, making it finally possible to define custom IWADs without having to add them to the internal list. (This isn't fully tested yet so some errors may still occur.)
2017-08-19 17:30:48 +00:00
IWADName = "square1.pk3"
Normalize line endings
2016-03-01 15:47:10 +00:00
Mapinfo = "mapinfo/mindefaults.txt"
MustContain = "SQU-SWE1", "E1A1"
BannerColors = "ff ff ff", "80 00 80"
}
IWad
{
Name = "Harmony"
Autoname = "harmony"
Game = "Doom"
Config = "Harmony"
- rewrite of the IWAD loading mechanism. The old code went through a list of predefined file names and looked each of them up in a list of predefined directories until it found a match. This made it nearly impossible to add custom IWAD support because the list of valid file names could not be extended. This has now been switched around to run a scan for matching files on each given directory. With this approach it can look for *.iwad and *.ipk3 as IWAD extensions as well and read an IWADINFO out of these files that can be added to the internal list of IWADs, making it finally possible to define custom IWADs without having to add them to the internal list. (This isn't fully tested yet so some errors may still occur.)
2017-08-19 17:30:48 +00:00
IWADName = "harm1.wad"
- did a bit of cleanup on the MAPINFO organization What could be done has been moved into the filter directory of game_support.pk3 Unfortunately most of the rest is needed as presets even for custom games so it cannot be fully cleaned up, because the dependencies here and the filter structure do not align 100%.
2019-07-16 23:05:58 +00:00
Mapinfo = "mapinfo/doom2.txt"
Normalize line endings
2016-03-01 15:47:10 +00:00
MustContain = "MAP01", "0HAWK01", "0CARA3", "0NOSE1"
BannerColors = "6e b4 d6", "45 4f 7e"
- setup Harmony localization. This also includes Blzut3's DECORATE version of the Harmony actors and disables the Dehacked patch, which was necessary to define a working set of dynamic lights and fix a few minor errors with the original.
2019-07-16 20:21:32 +00:00
DeleteLumps = "DEHACKED", "MAPINFO", "LANGUAGE", "DECALDEF", "DBIGFONT" // these get into the way of a clean setup.
IgnoreTitlePatches = 1
Normalize line endings
2016-03-01 15:47:10 +00:00
}
IWad
{
Name = "Hacx 2.0"
Game = "Doom"
Config = "Hacx"
Autoname = "hacx.hacx2"
- rewrite of the IWAD loading mechanism. The old code went through a list of predefined file names and looked each of them up in a list of predefined directories until it found a match. This made it nearly impossible to add custom IWAD support because the list of valid file names could not be extended. This has now been switched around to run a scan for matching files on each given directory. With this approach it can look for *.iwad and *.ipk3 as IWAD extensions as well and read an IWADINFO out of these files that can be added to the internal list of IWADs, making it finally possible to define custom IWADs without having to add them to the internal list. (This isn't fully tested yet so some errors may still occur.)
2017-08-19 17:30:48 +00:00
IWADName = "hacx2.wad"
- did a bit of cleanup on the MAPINFO organization What could be done has been moved into the filter directory of game_support.pk3 Unfortunately most of the rest is needed as presets even for custom games so it cannot be fully cleaned up, because the dependencies here and the filter structure do not align 100%.
2019-07-16 23:05:58 +00:00
Mapinfo = "mapinfo/doom2.txt"
Normalize line endings
2016-03-01 15:47:10 +00:00
MustContain = "MAP01", "HACX-E"
BannerColors = "ff ff ff", "00 88 22"
}
IWad
{
Name = "Hacx: Twitch'n Kill"
Game = "Doom"
Config = "Hacx"
Autoname = "hacx.hacx1"
- rewrite of the IWAD loading mechanism. The old code went through a list of predefined file names and looked each of them up in a list of predefined directories until it found a match. This made it nearly impossible to add custom IWAD support because the list of valid file names could not be extended. This has now been switched around to run a scan for matching files on each given directory. With this approach it can look for *.iwad and *.ipk3 as IWAD extensions as well and read an IWADINFO out of these files that can be added to the internal list of IWADs, making it finally possible to define custom IWADs without having to add them to the internal list. (This isn't fully tested yet so some errors may still occur.)
2017-08-19 17:30:48 +00:00
IWADName = "hacx.wad"
- did a bit of cleanup on the MAPINFO organization What could be done has been moved into the filter directory of game_support.pk3 Unfortunately most of the rest is needed as presets even for custom games so it cannot be fully cleaned up, because the dependencies here and the filter structure do not align 100%.
2019-07-16 23:05:58 +00:00
Mapinfo = "mapinfo/doom2.txt"
Normalize line endings
2016-03-01 15:47:10 +00:00
MustContain = "MAP01", "HACX-R"
BannerColors = "00 00 a8", "a8 a8 a8"
- fixes to let Hacx load its own extended font. There were two issues blocking this: * the Doom BigUpper font was loaded for all Doom-based games. It is only valid for original idgames releases and nothing more. * Hacx.wad defines its BigFont in FONTDEFS which blocks all custom fonts. Since the Hacx font and GZDoom's base BigFont are very similar, the FONTDEFS lump now gets deleted from the WAD directory.
2019-07-13 14:20:18 +00:00
DeleteLumps = "FONTDEFS"
- setup Harmony localization. This also includes Blzut3's DECORATE version of the Harmony actors and disables the Dehacked patch, which was necessary to define a working set of dynamic lights and fix a few minor errors with the original.
2019-07-16 20:21:32 +00:00
IgnoreTitlePatches = 1
Normalize line endings
2016-03-01 15:47:10 +00:00
}
IWad
{
Name = "Action Doom 2: Urban Brawl"
Autoname = "urbanbrawl"
Game = "Doom"
Config = "UrbanBrawl"
- rewrite of the IWAD loading mechanism. The old code went through a list of predefined file names and looked each of them up in a list of predefined directories until it found a match. This made it nearly impossible to add custom IWAD support because the list of valid file names could not be extended. This has now been switched around to run a scan for matching files on each given directory. With this approach it can look for *.iwad and *.ipk3 as IWAD extensions as well and read an IWADINFO out of these files that can be added to the internal list of IWADs, making it finally possible to define custom IWADs without having to add them to the internal list. (This isn't fully tested yet so some errors may still occur.)
2017-08-19 17:30:48 +00:00
IWADName = "action2.wad"
- did a bit of cleanup on the MAPINFO organization What could be done has been moved into the filter directory of game_support.pk3 Unfortunately most of the rest is needed as presets even for custom games so it cannot be fully cleaned up, because the dependencies here and the filter structure do not align 100%.
2019-07-16 23:05:58 +00:00
Mapinfo = "mapinfo/doom2.txt"
Normalize line endings
2016-03-01 15:47:10 +00:00
MustContain = "MAP01", "AD2LIB"
BannerColors = "a8 a8 00", "a8 00 00"
}
IWad
{
Name = "Chex(R) Quest 3"
Autoname = "chex.chex3"
Game = "Chex"
Config = "Chex"
- rewrite of the IWAD loading mechanism. The old code went through a list of predefined file names and looked each of them up in a list of predefined directories until it found a match. This made it nearly impossible to add custom IWAD support because the list of valid file names could not be extended. This has now been switched around to run a scan for matching files on each given directory. With this approach it can look for *.iwad and *.ipk3 as IWAD extensions as well and read an IWADINFO out of these files that can be added to the internal list of IWADs, making it finally possible to define custom IWADs without having to add them to the internal list. (This isn't fully tested yet so some errors may still occur.)
2017-08-19 17:30:48 +00:00
IWADName = "chex3.wad"
Normalize line endings
2016-03-01 15:47:10 +00:00
Mapinfo = "mapinfo/chex.txt"
MustContain = "E1M1", "CYCLA1", "FLMBA1", "MAPINFO"
BannerColors = "ff ff 00", "00 c0 00"
- implemented 'deletelumps' feature and add Chex Quest 3 texts. The episode titles required a workaround because the CQ3 episodes do not contain names in text form: If this is the case, the patch name will be used as a string table identifier to get a matching text for localization.
2019-04-14 20:46:03 +00:00
IgnoreTitlePatches = 1
DeleteLumps = "LANGUAGE", "TEXTCOLO", "DBIGFONT"
Normalize line endings
2016-03-01 15:47:10 +00:00
}
IWad
{
Name = "Chex(R) Quest"
Autoname = "chex.chex1"
Game = "Chex"
Config = "Chex"
- rewrite of the IWAD loading mechanism. The old code went through a list of predefined file names and looked each of them up in a list of predefined directories until it found a match. This made it nearly impossible to add custom IWAD support because the list of valid file names could not be extended. This has now been switched around to run a scan for matching files on each given directory. With this approach it can look for *.iwad and *.ipk3 as IWAD extensions as well and read an IWADINFO out of these files that can be added to the internal list of IWADs, making it finally possible to define custom IWADs without having to add them to the internal list. (This isn't fully tested yet so some errors may still occur.)
2017-08-19 17:30:48 +00:00
IWADName = "chex.wad"
Normalize line endings
2016-03-01 15:47:10 +00:00
Mapinfo = "mapinfo/chex.txt"
MustContain = "E1M1", "E4M1", "W94_1", "POSSH0M0"
BannerColors = "ff ff 00", "00 c0 00"
- implemented 'deletelumps' feature and add Chex Quest 3 texts. The episode titles required a workaround because the CQ3 episodes do not contain names in text form: If this is the case, the patch name will be used as a string table identifier to get a matching text for localization.
2019-04-14 20:46:03 +00:00
IgnoreTitlePatches = 1
Normalize line endings
2016-03-01 15:47:10 +00:00
}
- added rudimentary support for SVE.wad from the Strife Veteran edition so that the extended single player campaign is usable: * all new things got either an sctor definition or are explicitly deleted through the 'doomednums' section in MAPINFO. CTC related actors are non-functional! * added a 'noskillflags' option to 'doomednums' so that the lightmap definition things in the maps can be repurposed as dynamic lights. * added the new dagger powerup. * added MAPINFO entries for the added maps.
2017-05-01 18:44:41 +00:00
IWad
{
Name = "Strife: Veteran Edition"
Autoname = "strife.veteran"
Game = "Strife"
Config = "Strife"
- rewrite of the IWAD loading mechanism. The old code went through a list of predefined file names and looked each of them up in a list of predefined directories until it found a match. This made it nearly impossible to add custom IWAD support because the list of valid file names could not be extended. This has now been switched around to run a scan for matching files on each given directory. With this approach it can look for *.iwad and *.ipk3 as IWAD extensions as well and read an IWADINFO out of these files that can be added to the internal list of IWADs, making it finally possible to define custom IWADs without having to add them to the internal list. (This isn't fully tested yet so some errors may still occur.)
2017-08-19 17:30:48 +00:00
IWADName = "sve.wad"
- added rudimentary support for SVE.wad from the Strife Veteran edition so that the extended single player campaign is usable: * all new things got either an sctor definition or are explicitly deleted through the 'doomednums' section in MAPINFO. CTC related actors are non-functional! * added a 'noskillflags' option to 'doomednums' so that the lightmap definition things in the maps can be repurposed as dynamic lights. * added the new dagger powerup. * added MAPINFO entries for the added maps.
2017-05-01 18:44:41 +00:00
Mapinfo = "mapinfo/strife.txt"
MustContain = "MAP35", "I_RELB", "FXAA_F"
BannerColors = "f0 f0 f0", "6b 3c 18"
Required = "Strife: Quest for the Sigil"
- delete the teaser logs from SVE.WAD. The way Strife has been set uo, it is not possible to have the full game and the teaser coexist without hackery.
2019-08-07 17:22:06 +00:00
DeleteLumps = "LOG5", "LOG6", "LOG7", "LOG8", "LOG9", "LOG122", "LOG1101", "LOG1102", "LOG1201", "LOG122" // SVE adds the teaser logs which clash with the full game.
Load voices.wad in SVE Also put SVE along with the other Strife IWADs so they'll be listed together.
2017-05-11 17:08:34 +00:00
Load = "voices.wad"
- added rudimentary support for SVE.wad from the Strife Veteran edition so that the extended single player campaign is usable: * all new things got either an sctor definition or are explicitly deleted through the 'doomednums' section in MAPINFO. CTC related actors are non-functional! * added a 'noskillflags' option to 'doomednums' so that the lightmap definition things in the maps can be repurposed as dynamic lights. * added the new dagger powerup. * added MAPINFO entries for the added maps.
2017-05-01 18:44:41 +00:00
}
Normalize line endings
2016-03-01 15:47:10 +00:00
IWad
{
Name = "Strife: Quest for the Sigil"
- added rudimentary support for SVE.wad from the Strife Veteran edition so that the extended single player campaign is usable: * all new things got either an sctor definition or are explicitly deleted through the 'doomednums' section in MAPINFO. CTC related actors are non-functional! * added a 'noskillflags' option to 'doomednums' so that the lightmap definition things in the maps can be repurposed as dynamic lights. * added the new dagger powerup. * added MAPINFO entries for the added maps.
2017-05-01 18:44:41 +00:00
Autoname = "strife.strife"
Normalize line endings
2016-03-01 15:47:10 +00:00
Game = "Strife"
Config = "Strife"
- rewrite of the IWAD loading mechanism. The old code went through a list of predefined file names and looked each of them up in a list of predefined directories until it found a match. This made it nearly impossible to add custom IWAD support because the list of valid file names could not be extended. This has now been switched around to run a scan for matching files on each given directory. With this approach it can look for *.iwad and *.ipk3 as IWAD extensions as well and read an IWADINFO out of these files that can be added to the internal list of IWADs, making it finally possible to define custom IWADs without having to add them to the internal list. (This isn't fully tested yet so some errors may still occur.)
2017-08-19 17:30:48 +00:00
IWADName = "strife1.wad"
Normalize line endings
2016-03-01 15:47:10 +00:00
Mapinfo = "mapinfo/strife.txt"
MustContain = "MAP01", "MAP33", "ENDSTRF"
BannerColors = "d0 ad 99", "00 6b 65"
Load = "voices.wad"
}
IWad
{
Name = "Strife: Teaser (New Version)"
Game = "Strife"
Config = "Strife"
Autoname = "strifeteaser2"
Mapinfo = "mapinfo/strife.txt"
Compatibility = "Shareware", "Teaser2"
MustContain = "MAP33", "ENDSTRF", "INVCURS"
BannerColors = "d0 ad 99", "00 6b 65"
}
IWad
{
Name = "Strife: Teaser (Old Version)"
Game = "Strife"
Config = "Strife"
Autoname = "strifeteaser1"
Mapinfo = "mapinfo/strife.txt"
Compatibility = "Shareware"
MustContain = "MAP33", "ENDSTRF"
BannerColors = "d0 ad 99", "00 6b 65"
}
IWad
{
Name = "Hexen: Beyond Heretic"
Game = "Hexen"
Config = "Hexen"
Autoname = "hexen.hexen"
- rewrite of the IWAD loading mechanism. The old code went through a list of predefined file names and looked each of them up in a list of predefined directories until it found a match. This made it nearly impossible to add custom IWAD support because the list of valid file names could not be extended. This has now been switched around to run a scan for matching files on each given directory. With this approach it can look for *.iwad and *.ipk3 as IWAD extensions as well and read an IWADINFO out of these files that can be added to the internal list of IWADs, making it finally possible to define custom IWADs without having to add them to the internal list. (This isn't fully tested yet so some errors may still occur.)
2017-08-19 17:30:48 +00:00
IWADName = "hexen.wad"
Normalize line endings
2016-03-01 15:47:10 +00:00
Mapinfo = "mapinfo/hexen.txt"
Compatibility = "Poly1"
MustContain = "TITLE", "MAP01", "MAP40", "WINNOWR"
BannerColors = "f0 f0 f0", "6b 3c 18"
- added a "DeleteLumps" list to IWADINFO This is for IWADs that contain content which clashes with the engine and must be removed. The primary reason are the unimplemented characters in Raven's BigFont.
2019-04-11 01:02:23 +00:00
DeleteLumps = "FONTB01", "FONTB02", "FONTB03", "FONTB04", "FONTB06", "FONTB08", "FONTB09", "FONTB10", "FONTB11", "FONTB27", "FONTB28", "FONTB29", "FONTB30"
Normalize line endings
2016-03-01 15:47:10 +00:00
}
- did a bit of cleanup on the MAPINFO organization What could be done has been moved into the filter directory of game_support.pk3 Unfortunately most of the rest is needed as presets even for custom games so it cannot be fully cleaned up, because the dependencies here and the filter structure do not align 100%.
2019-07-16 23:05:58 +00:00
Normalize line endings
2016-03-01 15:47:10 +00:00
IWad
{
Name = "Hexen: Deathkings of the Dark Citadel"
Autoname = "hexen.deathkings"
Game = "Hexen"
Config = "Hexen"
Mapinfo = "mapinfo/hexen.txt"
Compatibility = "Poly1", "Poly2"
MustContain = "TITLE", "MAP60", "CLUS1MSG"
BannerColors = "f0 f0 f0", "6b 3c 18"
Required = "Hexen: Beyond Heretic"
}
IWad
{
Name = "Hexen: Demo Version"
- added autonames for the shareware games They still need to access some internal filters, despite blocking loading addons.
2020-03-10 23:38:26 +00:00
Autoname = "hexen.shareware"
Normalize line endings
2016-03-01 15:47:10 +00:00
Game = "Hexen"
Config = "Hexen"
Mapinfo = "mapinfo/hexen.txt"
Compatibility = "Shareware"
MustContain = "TITLE", "MAP01", "WINNOWR"
BannerColors = "f0 f0 f0", "6b 3c 18"
- added a "DeleteLumps" list to IWADINFO This is for IWADs that contain content which clashes with the engine and must be removed. The primary reason are the unimplemented characters in Raven's BigFont.
2019-04-11 01:02:23 +00:00
DeleteLumps = "FONTB01", "FONTB02", "FONTB03", "FONTB04", "FONTB06", "FONTB08", "FONTB09", "FONTB10", "FONTB11", "FONTB27", "FONTB28", "FONTB29", "FONTB30"
Normalize line endings
2016-03-01 15:47:10 +00:00
}
- did a bit of cleanup on the MAPINFO organization What could be done has been moved into the filter directory of game_support.pk3 Unfortunately most of the rest is needed as presets even for custom games so it cannot be fully cleaned up, because the dependencies here and the filter structure do not align 100%.
2019-07-16 23:05:58 +00:00
Normalize line endings
2016-03-01 15:47:10 +00:00
IWad
{
Name = "Blasphemer"
Autoname = "blasphemer"
Game = "Heretic"
Config = "Heretic"
- rewrite of the IWAD loading mechanism. The old code went through a list of predefined file names and looked each of them up in a list of predefined directories until it found a match. This made it nearly impossible to add custom IWAD support because the list of valid file names could not be extended. This has now been switched around to run a scan for matching files on each given directory. With this approach it can look for *.iwad and *.ipk3 as IWAD extensions as well and read an IWADINFO out of these files that can be added to the internal list of IWADs, making it finally possible to define custom IWADs without having to add them to the internal list. (This isn't fully tested yet so some errors may still occur.)
2017-08-19 17:30:48 +00:00
IWADName = "blasphemer.wad"
Normalize line endings
2016-03-01 15:47:10 +00:00
Mapinfo = "mapinfo/heretic.txt"
MustContain = "E1M1", "E2M1", "TITLE", "BLASPHEM"
BannerColors = "73 00 00", "00 00 00"
}
IWad
{
Name = "Heretic: Shadow of the Serpent Riders"
- add new config section names to iwadinfo.txt
2015-04-06 09:31:08 +00:00
Autoname = "heretic.shadow"
Normalize line endings
2016-03-01 15:47:10 +00:00
Game = "Heretic"
Config = "Heretic"
- rewrite of the IWAD loading mechanism. The old code went through a list of predefined file names and looked each of them up in a list of predefined directories until it found a match. This made it nearly impossible to add custom IWAD support because the list of valid file names could not be extended. This has now been switched around to run a scan for matching files on each given directory. With this approach it can look for *.iwad and *.ipk3 as IWAD extensions as well and read an IWADINFO out of these files that can be added to the internal list of IWADs, making it finally possible to define custom IWADs without having to add them to the internal list. (This isn't fully tested yet so some errors may still occur.)
2017-08-19 17:30:48 +00:00
IWADName = "heretic.wad"
Normalize line endings
2016-03-01 15:47:10 +00:00
Mapinfo = "mapinfo/heretic.txt"
Compatibility = "Extended"
MustContain = "E1M1", "E2M1", "TITLE", "MUS_E1M1", "EXTENDED"
BannerColors = "fc fc 00", "a8 00 00"
- added a "DeleteLumps" list to IWADINFO This is for IWADs that contain content which clashes with the engine and must be removed. The primary reason are the unimplemented characters in Raven's BigFont.
2019-04-11 01:02:23 +00:00
DeleteLumps = "FONTB01", "FONTB02", "FONTB03", "FONTB04", "FONTB06", "FONTB08", "FONTB09", "FONTB10", "FONTB11", "FONTB27", "FONTB28", "FONTB29", "FONTB30"
Normalize line endings
2016-03-01 15:47:10 +00:00
}
IWad
{
Name = "Heretic"
Game = "Heretic"
Config = "Heretic"
- rewrite of the IWAD loading mechanism. The old code went through a list of predefined file names and looked each of them up in a list of predefined directories until it found a match. This made it nearly impossible to add custom IWAD support because the list of valid file names could not be extended. This has now been switched around to run a scan for matching files on each given directory. With this approach it can look for *.iwad and *.ipk3 as IWAD extensions as well and read an IWADINFO out of these files that can be added to the internal list of IWADs, making it finally possible to define custom IWADs without having to add them to the internal list. (This isn't fully tested yet so some errors may still occur.)
2017-08-19 17:30:48 +00:00
IWADName = "heretic.wad"
Normalize line endings
2016-03-01 15:47:10 +00:00
Autoname = "heretic.heretic"
Mapinfo = "mapinfo/heretic.txt"
MustContain = "E1M1", "E2M1", "TITLE", "MUS_E1M1"
BannerColors = "fc fc 00", "a8 00 00"
- added a "DeleteLumps" list to IWADINFO This is for IWADs that contain content which clashes with the engine and must be removed. The primary reason are the unimplemented characters in Raven's BigFont.
2019-04-11 01:02:23 +00:00
DeleteLumps = "FONTB01", "FONTB02", "FONTB03", "FONTB04", "FONTB06", "FONTB08", "FONTB09", "FONTB10", "FONTB11", "FONTB27", "FONTB28", "FONTB29", "FONTB30"
Normalize line endings
2016-03-01 15:47:10 +00:00
}
IWad
{
- added autonames for the shareware games They still need to access some internal filters, despite blocking loading addons.
2020-03-10 23:38:26 +00:00
Autoname = "heretic.shareware"
Normalize line endings
2016-03-01 15:47:10 +00:00
Name = "Heretic Shareware"
Game = "Heretic"
Config = "Heretic"
- did a bit of cleanup on the MAPINFO organization What could be done has been moved into the filter directory of game_support.pk3 Unfortunately most of the rest is needed as presets even for custom games so it cannot be fully cleaned up, because the dependencies here and the filter structure do not align 100%.
2019-07-16 23:05:58 +00:00
Mapinfo = "mapinfo/heretic.txt"
Normalize line endings
2016-03-01 15:47:10 +00:00
Compatibility = "Shareware"
MustContain = "E1M1", "TITLE", "MUS_E1M1"
BannerColors = "fc fc 00", "a8 00 00"
- added a "DeleteLumps" list to IWADINFO This is for IWADs that contain content which clashes with the engine and must be removed. The primary reason are the unimplemented characters in Raven's BigFont.
2019-04-11 01:02:23 +00:00
DeleteLumps = "FONTB01", "FONTB02", "FONTB03", "FONTB04", "FONTB06", "FONTB08", "FONTB09", "FONTB10", "FONTB11", "FONTB27", "FONTB28", "FONTB29", "FONTB30"
Normalize line endings
2016-03-01 15:47:10 +00:00
}
IWad
{
Name = "FreeDM"
Autoname = "doom.freedoom.freedm"
Game = "Doom"
Config = "Doom"
- rewrite of the IWAD loading mechanism. The old code went through a list of predefined file names and looked each of them up in a list of predefined directories until it found a match. This made it nearly impossible to add custom IWAD support because the list of valid file names could not be extended. This has now been switched around to run a scan for matching files on each given directory. With this approach it can look for *.iwad and *.ipk3 as IWAD extensions as well and read an IWADINFO out of these files that can be added to the internal list of IWADs, making it finally possible to define custom IWADs without having to add them to the internal list. (This isn't fully tested yet so some errors may still occur.)
2017-08-19 17:30:48 +00:00
IWADName = "freedm.wad"
Normalize line endings
2016-03-01 15:47:10 +00:00
Mapinfo = "mapinfo/doom2.txt"
MustContain = "MAP01", "FREEDM"
BannerColors = "32 54 43", "c6 dc d1"
}
IWad
{
Name = "Freedoom: Phase 2"
- add new config section names to iwadinfo.txt
2015-04-06 09:31:08 +00:00
Autoname = "doom.freedoom.phase2"
Normalize line endings
2016-03-01 15:47:10 +00:00
Game = "Doom"
Config = "Doom"
- rewrite of the IWAD loading mechanism. The old code went through a list of predefined file names and looked each of them up in a list of predefined directories until it found a match. This made it nearly impossible to add custom IWAD support because the list of valid file names could not be extended. This has now been switched around to run a scan for matching files on each given directory. With this approach it can look for *.iwad and *.ipk3 as IWAD extensions as well and read an IWADINFO out of these files that can be added to the internal list of IWADs, making it finally possible to define custom IWADs without having to add them to the internal list. (This isn't fully tested yet so some errors may still occur.)
2017-08-19 17:30:48 +00:00
IWADName = "freedoom2.wad"
Normalize line endings
2016-03-01 15:47:10 +00:00
Mapinfo = "mapinfo/doom2.txt"
MustContain = "MAP01", "FREEDOOM"
BannerColors = "32 54 43", "c6 dc d1"
}
IWad
{
Name = "Freedoom: Phase 1"
Autoname = "doom.freedoom.phase1"
Game = "Doom"
Config = "Doom"
- rewrite of the IWAD loading mechanism. The old code went through a list of predefined file names and looked each of them up in a list of predefined directories until it found a match. This made it nearly impossible to add custom IWAD support because the list of valid file names could not be extended. This has now been switched around to run a scan for matching files on each given directory. With this approach it can look for *.iwad and *.ipk3 as IWAD extensions as well and read an IWADINFO out of these files that can be added to the internal list of IWADs, making it finally possible to define custom IWADs without having to add them to the internal list. (This isn't fully tested yet so some errors may still occur.)
2017-08-19 17:30:48 +00:00
IWADName = "freedoom1.wad"
Normalize line endings
2016-03-01 15:47:10 +00:00
Mapinfo = "mapinfo/doom1.txt"
MustContain = "E1M1", "E2M1", "E3M1", "FREEDOOM"
BannerColors = "32 54 43", "c6 dc d1"
}
- did a bit of cleanup on the MAPINFO organization What could be done has been moved into the filter directory of game_support.pk3 Unfortunately most of the rest is needed as presets even for custom games so it cannot be fully cleaned up, because the dependencies here and the filter structure do not align 100%.
2019-07-16 23:05:58 +00:00
Normalize line endings
2016-03-01 15:47:10 +00:00
IWad
{
- completing Autoload sections * add new Autoname "HereticSR" for Heretic: Shadow of the Serpent Riders. * add missing CreateSectionAtStart() calls for Chex1, HereticSR, Freedoom2, DoomBFG and Doom2BFG. * remove Autoname "HexenDemo" because shareware games do not allow loading any custom content.
2015-01-22 07:38:08 +00:00
Name = "Freedoom: Demo Version"
Normalize line endings
2016-03-01 15:47:10 +00:00
Autoname = "doom.freedoom.demo"
Game = "Doom"
Config = "Doom"
Mapinfo = "mapinfo/doom1.txt"
MustContain = "E1M1", "FREEDOOM"
BannerColors = "32 54 43", "c6 dc d1"
}
- did a bit of cleanup on the MAPINFO organization What could be done has been moved into the filter directory of game_support.pk3 Unfortunately most of the rest is needed as presets even for custom games so it cannot be fully cleaned up, because the dependencies here and the filter structure do not align 100%.
2019-07-16 23:05:58 +00:00
Normalize line endings
2016-03-01 15:47:10 +00:00
IWad
{
- completing Autoload sections * add new Autoname "HereticSR" for Heretic: Shadow of the Serpent Riders. * add missing CreateSectionAtStart() calls for Chex1, HereticSR, Freedoom2, DoomBFG and Doom2BFG. * remove Autoname "HexenDemo" because shareware games do not allow loading any custom content.
2015-01-22 07:38:08 +00:00
Name = "DOOM: BFG Edition"
- changed the filter name for Doom IWADs It's "doom.id.doom1/2" instead of "doom.doom1/2" now. The config file's content will be renamed and for lump filtering a fallback has been added - note that you cannot combine both naming schemes! The old one has to be considered deprecated now. This also removes the duplicated content necessitated by the old naming scheme.
2019-04-09 22:15:16 +00:00
Autoname = "doom.id.doom1.bfg"
Normalize line endings
2016-03-01 15:47:10 +00:00
Game = "Doom"
Config = "Doom"
- rewrite of the IWAD loading mechanism. The old code went through a list of predefined file names and looked each of them up in a list of predefined directories until it found a match. This made it nearly impossible to add custom IWAD support because the list of valid file names could not be extended. This has now been switched around to run a scan for matching files on each given directory. With this approach it can look for *.iwad and *.ipk3 as IWAD extensions as well and read an IWADINFO out of these files that can be added to the internal list of IWADs, making it finally possible to define custom IWADs without having to add them to the internal list. (This isn't fully tested yet so some errors may still occur.)
2017-08-19 17:30:48 +00:00
IWADName = "doom.wad", 2
Normalize line endings
2016-03-01 15:47:10 +00:00
Mapinfo = "mapinfo/ultdoom.txt"
Compatibility = "Shorttex"
MustContain = "E1M1","E2M1","E2M2","E2M3","E2M4","E2M5","E2M6","E2M7","E2M8","E2M9",
"E3M1","E3M2","E3M3","E3M4","E3M5","E3M6","E3M7","E3M8","E3M9",
"DPHOOF","BFGGA0","HEADA1","CYBRA1","SPIDA1D1", "E4M2",
"DMENUPIC", "M_ACPT", "M_CAN", "M_EXITO", "M_CHG"
BannerColors = "54 54 54", "a8 a8 a8"
- allow the language table to supersede the title patches, if appropriate For the Doom IWADs the provided font looks almost identical to the characters used on the title patches. So, for any level name that got replaced in some language, it will now check if the retrieved name comes from the default table, and if not, ignore the title patch and print the name with the specified font. This also required removing the 'en' label from the default table, because with this present, the text would always be picked from 'en' instead of 'default'. Since 'en' and 'default' had the same contents, in any English locale the 'default' table was never hit, so this won't make any difference for the texts being chosen. Last but not least, wminfo has been made a local variable in G_DoCompleted. There were two places where this was accessed from outside the summary screen or its setup code, and both were incorrect.
2019-02-14 23:29:24 +00:00
IgnoreTitlePatches = 1
Normalize line endings
2016-03-01 15:47:10 +00:00
}
- add support for new Bethesda.Net Unity Edition wads - they can be extracted with this utility: https://github.com/kevansevans/Unity-Doom-Ripper
2020-01-10 21:36:01 +00:00
IWad
{
Name = "DOOM: Unity Edition"
Autoname = "doom.id.doom1.unity"
Game = "Doom"
Config = "Doom"
- update filename for ultimate doom unity edition - add support for tnt/plutonia unity edition - uses same extraction program by kevansevans
2020-01-11 06:18:23 +00:00
IWADName = "doomunity.wad", 2
- add support for new Bethesda.Net Unity Edition wads - they can be extracted with this utility: https://github.com/kevansevans/Unity-Doom-Ripper
2020-01-10 21:36:01 +00:00
Mapinfo = "mapinfo/ultdoom.txt"
Compatibility = "Shorttex"
MustContain = "E1M1","E2M1","E2M2","E2M3","E2M4","E2M5","E2M6","E2M7","E2M8","E2M9",
"E3M1","E3M2","E3M3","E3M4","E3M5","E3M6","E3M7","E3M8","E3M9",
"DPHOOF","BFGGA0","HEADA1","CYBRA1","SPIDA1D1", "E4M2",
"DMENUPIC"
- do unity data status bar correction only if stbar is in an iwad
2020-09-05 10:18:41 +00:00
Load = "extras.wad", "soundtrack"
- add support for new Bethesda.Net Unity Edition wads - they can be extracted with this utility: https://github.com/kevansevans/Unity-Doom-Ripper
2020-01-10 21:36:01 +00:00
BannerColors = "00 7c 00", "a8 a8 a8"
IgnoreTitlePatches = 1
- add support for the (as of now) newest version of the Unity re-releases
2020-09-04 03:36:19 +00:00
AlwaysCenterStatusbar = 1
- add support for new Bethesda.Net Unity Edition wads - they can be extracted with this utility: https://github.com/kevansevans/Unity-Doom-Ripper
2020-01-10 21:36:01 +00:00
}
- Made WadSmoosh detection a lot stricter.
2017-01-04 18:47:31 +00:00
IWad
{
Name = "DOOM: Complete: WadSmoosh"
- changed the filter name for Doom IWADs It's "doom.id.doom1/2" instead of "doom.doom1/2" now. The config file's content will be renamed and for lump filtering a fallback has been added - note that you cannot combine both naming schemes! The old one has to be considered deprecated now. This also removes the duplicated content necessitated by the old naming scheme.
2019-04-09 22:15:16 +00:00
Autoname = "doom.id.doom2.wadsmoosh"
- Made WadSmoosh detection a lot stricter.
2017-01-04 18:47:31 +00:00
Game = "Doom"
Config = "Doom"
Mapinfo = "mapinfo/doom2.txt"
Compatibility = "Shorttex"
MustContain = "SMOOSHED", "ANIMDEFS", "LANGUAGE", "MAPINFO", "ENDOOM", "M_DOOM", "TITLEPIC", "TEXTURES"
BannerColors = "a8 00 00", "a8 a8 a8"
- allow the language table to supersede the title patches, if appropriate For the Doom IWADs the provided font looks almost identical to the characters used on the title patches. So, for any level name that got replaced in some language, it will now check if the retrieved name comes from the default table, and if not, ignore the title patch and print the name with the specified font. This also required removing the 'en' label from the default table, because with this present, the text would always be picked from 'en' instead of 'default'. Since 'en' and 'default' had the same contents, in any English locale the 'default' table was never hit, so this won't make any difference for the texts being chosen. Last but not least, wminfo has been made a local variable in G_DoCompleted. There were two places where this was accessed from outside the summary screen or its setup code, and both were incorrect.
2019-02-14 23:29:24 +00:00
IgnoreTitlePatches = 1
- use unity status bar correcting for wadsmoosh
2020-09-05 19:56:01 +00:00
AlwaysCenterStatusbar = 1
- Made WadSmoosh detection a lot stricter.
2017-01-04 18:47:31 +00:00
}
- add support for xbox 360 versions of Doom/Doom2
2020-01-20 01:01:06 +00:00
IWad
{
Name = "DOOM: XBox Edition"
Autoname = "doom.id.doom1.ultimate.xbox"
Game = "Doom"
Config = "Doom"
IWADName = "doom.wad"
Mapinfo = "mapinfo/doomxbox.txt"
Compatibility = "Shorttex"
MustContain = "E1M1","E2M1","E2M2","E2M3","E2M4","E2M5","E2M6","E2M7","E2M8","E2M9",
"E3M1","E3M2","E3M3","E3M4","E3M5","E3M6","E3M7","E3M8","E3M9",
"DPHOOF","BFGGA0","HEADA1","CYBRA1","SPIDA1D1", "E4M2", "E1M10", "SEWERS"
BannerColors = "18 18 18", "a8 a8 a8"
IgnoreTitlePatches = 1
}
Normalize line endings
2016-03-01 15:47:10 +00:00
IWad
{
Name = "The Ultimate DOOM"
- changed the filter name for Doom IWADs It's "doom.id.doom1/2" instead of "doom.doom1/2" now. The config file's content will be renamed and for lump filtering a fallback has been added - note that you cannot combine both naming schemes! The old one has to be considered deprecated now. This also removes the duplicated content necessitated by the old naming scheme.
2019-04-09 22:15:16 +00:00
Autoname = "doom.id.doom1.ultimate"
Normalize line endings
2016-03-01 15:47:10 +00:00
Game = "Doom"
Config = "Doom"
- rewrite of the IWAD loading mechanism. The old code went through a list of predefined file names and looked each of them up in a list of predefined directories until it found a match. This made it nearly impossible to add custom IWAD support because the list of valid file names could not be extended. This has now been switched around to run a scan for matching files on each given directory. With this approach it can look for *.iwad and *.ipk3 as IWAD extensions as well and read an IWADINFO out of these files that can be added to the internal list of IWADs, making it finally possible to define custom IWADs without having to add them to the internal list. (This isn't fully tested yet so some errors may still occur.)
2017-08-19 17:30:48 +00:00
IWADName = "doom.wad"
Normalize line endings
2016-03-01 15:47:10 +00:00
Mapinfo = "mapinfo/ultdoom.txt"
Compatibility = "Shorttex"
MustContain = "E1M1","E2M1","E2M2","E2M3","E2M4","E2M5","E2M6","E2M7","E2M8","E2M9",
"E3M1","E3M2","E3M3","E3M4","E3M5","E3M6","E3M7","E3M8","E3M9",
"DPHOOF","BFGGA0","HEADA1","CYBRA1","SPIDA1D1", "E4M2"
BannerColors = "54 54 54", "a8 a8 a8"
- allow the language table to supersede the title patches, if appropriate For the Doom IWADs the provided font looks almost identical to the characters used on the title patches. So, for any level name that got replaced in some language, it will now check if the retrieved name comes from the default table, and if not, ignore the title patch and print the name with the specified font. This also required removing the 'en' label from the default table, because with this present, the text would always be picked from 'en' instead of 'default'. Since 'en' and 'default' had the same contents, in any English locale the 'default' table was never hit, so this won't make any difference for the texts being chosen. Last but not least, wminfo has been made a local variable in G_DoCompleted. There were two places where this was accessed from outside the summary screen or its setup code, and both were incorrect.
2019-02-14 23:29:24 +00:00
IgnoreTitlePatches = 1
Normalize line endings
2016-03-01 15:47:10 +00:00
}
IWad
{
Name = "DOOM Registered"
- changed the filter name for Doom IWADs It's "doom.id.doom1/2" instead of "doom.doom1/2" now. The config file's content will be renamed and for lump filtering a fallback has been added - note that you cannot combine both naming schemes! The old one has to be considered deprecated now. This also removes the duplicated content necessitated by the old naming scheme.
2019-04-09 22:15:16 +00:00
Autoname = "doom.id.doom1.registered"
Normalize line endings
2016-03-01 15:47:10 +00:00
Game = "Doom"
Config = "Doom"
- rewrite of the IWAD loading mechanism. The old code went through a list of predefined file names and looked each of them up in a list of predefined directories until it found a match. This made it nearly impossible to add custom IWAD support because the list of valid file names could not be extended. This has now been switched around to run a scan for matching files on each given directory. With this approach it can look for *.iwad and *.ipk3 as IWAD extensions as well and read an IWADINFO out of these files that can be added to the internal list of IWADs, making it finally possible to define custom IWADs without having to add them to the internal list. (This isn't fully tested yet so some errors may still occur.)
2017-08-19 17:30:48 +00:00
IWADName = "doom.wad", 1
Normalize line endings
2016-03-01 15:47:10 +00:00
Mapinfo = "mapinfo/doom1.txt"
Compatibility = "Shorttex"
MustContain = "E1M1","E2M1","E2M2","E2M3","E2M4","E2M5","E2M6","E2M7","E2M8","E2M9",
"E3M1","E3M2","E3M3","E3M4","E3M5","E3M6","E3M7","E3M8","E3M9",
"DPHOOF","BFGGA0","HEADA1","CYBRA1","SPIDA1D1"
BannerColors = "54 54 54", "a8 a8 a8"
- allow the language table to supersede the title patches, if appropriate For the Doom IWADs the provided font looks almost identical to the characters used on the title patches. So, for any level name that got replaced in some language, it will now check if the retrieved name comes from the default table, and if not, ignore the title patch and print the name with the specified font. This also required removing the 'en' label from the default table, because with this present, the text would always be picked from 'en' instead of 'default'. Since 'en' and 'default' had the same contents, in any English locale the 'default' table was never hit, so this won't make any difference for the texts being chosen. Last but not least, wminfo has been made a local variable in G_DoCompleted. There were two places where this was accessed from outside the summary screen or its setup code, and both were incorrect.
2019-02-14 23:29:24 +00:00
IgnoreTitlePatches = 1
Normalize line endings
2016-03-01 15:47:10 +00:00
}
IWad
{
Name = "DOOM Shareware"
- added autonames for the shareware games They still need to access some internal filters, despite blocking loading addons.
2020-03-10 23:38:26 +00:00
Autoname = "doom.id.doom1.shareware"
Normalize line endings
2016-03-01 15:47:10 +00:00
Game = "Doom"
Config = "Doom"
Mapinfo = "mapinfo/doom1.txt"
Compatibility = "Shareware", "Shorttex"
MustContain = "E1M1"
BannerColors = "54 54 54", "a8 a8 a8"
- allow the language table to supersede the title patches, if appropriate For the Doom IWADs the provided font looks almost identical to the characters used on the title patches. So, for any level name that got replaced in some language, it will now check if the retrieved name comes from the default table, and if not, ignore the title patch and print the name with the specified font. This also required removing the 'en' label from the default table, because with this present, the text would always be picked from 'en' instead of 'default'. Since 'en' and 'default' had the same contents, in any English locale the 'default' table was never hit, so this won't make any difference for the texts being chosen. Last but not least, wminfo has been made a local variable in G_DoCompleted. There were two places where this was accessed from outside the summary screen or its setup code, and both were incorrect.
2019-02-14 23:29:24 +00:00
IgnoreTitlePatches = 1
Normalize line endings
2016-03-01 15:47:10 +00:00
}
- update filename for ultimate doom unity edition - add support for tnt/plutonia unity edition - uses same extraction program by kevansevans
2020-01-11 06:18:23 +00:00
IWad
{
Name = "Final Doom: TNT - Evilution: Unity Edition"
Autoname = "doom.id.doom2.tnt.unity"
Game = "Doom"
Config = "Doom"
IWADName = "tnt.wad"
Mapinfo = "mapinfo/tnt.txt"
Compatibility = "Shorttex", "Stairs"
MustContain = "MAP01", "REDTNT2", "DMAPINFO"
BannerColors = "00 7c 00", "a8 a8 a8"
IgnoreTitlePatches = 1
- add support for the (as of now) newest version of the Unity re-releases
2020-09-04 03:36:19 +00:00
AlwaysCenterStatusbar = 1
- update filename for ultimate doom unity edition - add support for tnt/plutonia unity edition - uses same extraction program by kevansevans
2020-01-11 06:18:23 +00:00
}
Normalize line endings
2016-03-01 15:47:10 +00:00
IWad
{
Name = "Final Doom: TNT - Evilution"
- changed the filter name for Doom IWADs It's "doom.id.doom1/2" instead of "doom.doom1/2" now. The config file's content will be renamed and for lump filtering a fallback has been added - note that you cannot combine both naming schemes! The old one has to be considered deprecated now. This also removes the duplicated content necessitated by the old naming scheme.
2019-04-09 22:15:16 +00:00
Autoname = "doom.id.doom2.tnt"
Normalize line endings
2016-03-01 15:47:10 +00:00
Game = "Doom"
Config = "Doom"
- rewrite of the IWAD loading mechanism. The old code went through a list of predefined file names and looked each of them up in a list of predefined directories until it found a match. This made it nearly impossible to add custom IWAD support because the list of valid file names could not be extended. This has now been switched around to run a scan for matching files on each given directory. With this approach it can look for *.iwad and *.ipk3 as IWAD extensions as well and read an IWADINFO out of these files that can be added to the internal list of IWADs, making it finally possible to define custom IWADs without having to add them to the internal list. (This isn't fully tested yet so some errors may still occur.)
2017-08-19 17:30:48 +00:00
IWADName = "tnt.wad"
Normalize line endings
2016-03-01 15:47:10 +00:00
Mapinfo = "mapinfo/tnt.txt"
Compatibility = "Shorttex", "Stairs"
MustContain = "MAP01", "REDTNT2"
BannerColors = "a8 00 00", "a8 a8 a8"
- allow the language table to supersede the title patches, if appropriate For the Doom IWADs the provided font looks almost identical to the characters used on the title patches. So, for any level name that got replaced in some language, it will now check if the retrieved name comes from the default table, and if not, ignore the title patch and print the name with the specified font. This also required removing the 'en' label from the default table, because with this present, the text would always be picked from 'en' instead of 'default'. Since 'en' and 'default' had the same contents, in any English locale the 'default' table was never hit, so this won't make any difference for the texts being chosen. Last but not least, wminfo has been made a local variable in G_DoCompleted. There were two places where this was accessed from outside the summary screen or its setup code, and both were incorrect.
2019-02-14 23:29:24 +00:00
IgnoreTitlePatches = 1
Normalize line endings
2016-03-01 15:47:10 +00:00
}
- update filename for ultimate doom unity edition - add support for tnt/plutonia unity edition - uses same extraction program by kevansevans
2020-01-11 06:18:23 +00:00
IWad
{
Name = "Final Doom: Plutonia Experiment: Unity Edition"
Autoname = "doom.id.doom2.plutonia.unity"
Game = "Doom"
Config = "Doom"
IWADName = "plutonia.wad"
Mapinfo = "mapinfo/plutonia.txt"
Compatibility = "Shorttex"
MustContain = "MAP01", "CAMO1", "DMAPINFO"
BannerColors = "00 7c 00", "a8 a8 a8"
IgnoreTitlePatches = 1
- add support for the (as of now) newest version of the Unity re-releases
2020-09-04 03:36:19 +00:00
AlwaysCenterStatusbar = 1
- update filename for ultimate doom unity edition - add support for tnt/plutonia unity edition - uses same extraction program by kevansevans
2020-01-11 06:18:23 +00:00
}
Normalize line endings
2016-03-01 15:47:10 +00:00
IWad
{
Name = "Final Doom: Plutonia Experiment"
- changed the filter name for Doom IWADs It's "doom.id.doom1/2" instead of "doom.doom1/2" now. The config file's content will be renamed and for lump filtering a fallback has been added - note that you cannot combine both naming schemes! The old one has to be considered deprecated now. This also removes the duplicated content necessitated by the old naming scheme.
2019-04-09 22:15:16 +00:00
Autoname = "doom.id.doom2.plutonia"
Normalize line endings
2016-03-01 15:47:10 +00:00
Game = "Doom"
Config = "Doom"
- rewrite of the IWAD loading mechanism. The old code went through a list of predefined file names and looked each of them up in a list of predefined directories until it found a match. This made it nearly impossible to add custom IWAD support because the list of valid file names could not be extended. This has now been switched around to run a scan for matching files on each given directory. With this approach it can look for *.iwad and *.ipk3 as IWAD extensions as well and read an IWADINFO out of these files that can be added to the internal list of IWADs, making it finally possible to define custom IWADs without having to add them to the internal list. (This isn't fully tested yet so some errors may still occur.)
2017-08-19 17:30:48 +00:00
IWADName = "plutonia.wad"
Normalize line endings
2016-03-01 15:47:10 +00:00
Mapinfo = "mapinfo/plutonia.txt"
Compatibility = "Shorttex"
MustContain = "MAP01", "CAMO1"
BannerColors = "a8 00 00", "a8 a8 a8"
- allow the language table to supersede the title patches, if appropriate For the Doom IWADs the provided font looks almost identical to the characters used on the title patches. So, for any level name that got replaced in some language, it will now check if the retrieved name comes from the default table, and if not, ignore the title patch and print the name with the specified font. This also required removing the 'en' label from the default table, because with this present, the text would always be picked from 'en' instead of 'default'. Since 'en' and 'default' had the same contents, in any English locale the 'default' table was never hit, so this won't make any difference for the texts being chosen. Last but not least, wminfo has been made a local variable in G_DoCompleted. There were two places where this was accessed from outside the summary screen or its setup code, and both were incorrect.
2019-02-14 23:29:24 +00:00
IgnoreTitlePatches = 1
Normalize line endings
2016-03-01 15:47:10 +00:00
}
IWad
{
Name = "DOOM 2: BFG Edition"
- changed the filter name for Doom IWADs It's "doom.id.doom1/2" instead of "doom.doom1/2" now. The config file's content will be renamed and for lump filtering a fallback has been added - note that you cannot combine both naming schemes! The old one has to be considered deprecated now. This also removes the duplicated content necessitated by the old naming scheme.
2019-04-09 22:15:16 +00:00
Autoname = "doom.id.doom2.bfg"
Normalize line endings
2016-03-01 15:47:10 +00:00
Game = "Doom"
Config = "Doom"
- rewrite of the IWAD loading mechanism. The old code went through a list of predefined file names and looked each of them up in a list of predefined directories until it found a match. This made it nearly impossible to add custom IWAD support because the list of valid file names could not be extended. This has now been switched around to run a scan for matching files on each given directory. With this approach it can look for *.iwad and *.ipk3 as IWAD extensions as well and read an IWADINFO out of these files that can be added to the internal list of IWADs, making it finally possible to define custom IWADs without having to add them to the internal list. (This isn't fully tested yet so some errors may still occur.)
2017-08-19 17:30:48 +00:00
IWADName = "doom2.wad"
Normalize line endings
2016-03-01 15:47:10 +00:00
Mapinfo = "mapinfo/doom2bfg.txt"
Compatibility = "Shorttex"
MustContain = "MAP01", "DMENUPIC", "M_ACPT", "M_CAN", "M_EXITO", "M_CHG"
BannerColors = "a8 00 00", "a8 a8 a8"
Load = "nerve.wad"
- allow the language table to supersede the title patches, if appropriate For the Doom IWADs the provided font looks almost identical to the characters used on the title patches. So, for any level name that got replaced in some language, it will now check if the retrieved name comes from the default table, and if not, ignore the title patch and print the name with the specified font. This also required removing the 'en' label from the default table, because with this present, the text would always be picked from 'en' instead of 'default'. Since 'en' and 'default' had the same contents, in any English locale the 'default' table was never hit, so this won't make any difference for the texts being chosen. Last but not least, wminfo has been made a local variable in G_DoCompleted. There were two places where this was accessed from outside the summary screen or its setup code, and both were incorrect.
2019-02-14 23:29:24 +00:00
IgnoreTitlePatches = 1
Normalize line endings
2016-03-01 15:47:10 +00:00
}
- add support for new Bethesda.Net Unity Edition wads - they can be extracted with this utility: https://github.com/kevansevans/Unity-Doom-Ripper
2020-01-10 21:36:01 +00:00
IWad
{
Name = "DOOM 2: Unity Edition"
Autoname = "doom.id.doom2.unity"
Game = "Doom"
Config = "Doom"
IWADName = "doom2unity.wad"
Mapinfo = "mapinfo/doom2unity.txt"
Compatibility = "Shorttex"
MustContain = "MAP01", "DMENUPIC"
BannerColors = "00 7c 00", "a8 a8 a8"
IgnoreTitlePatches = 1
- do unity data status bar correction only if stbar is in an iwad
2020-09-05 10:18:41 +00:00
Load = "nerveunity.wad", "extras.wad", "soundtrack"
- add support for the (as of now) newest version of the Unity re-releases
2020-09-04 03:36:19 +00:00
AlwaysCenterStatusbar = 1
- add support for new Bethesda.Net Unity Edition wads - they can be extracted with this utility: https://github.com/kevansevans/Unity-Doom-Ripper
2020-01-10 21:36:01 +00:00
}
- add support for xbox 360 versions of Doom/Doom2
2020-01-20 01:01:06 +00:00
IWad
{
Name = "DOOM 2: XBox Edition"
Autoname = "doom.id.doom2.commercial.xbox"
Game = "Doom"
Config = "Doom"
IWADName = "doom2.wad", 1
Mapinfo = "mapinfo/doom2xbox.txt"
Compatibility = "Shorttex"
MustContain = "MAP01", "MAP33", "CWILV32"
BannerColors = "18 18 18", "a8 a8 a8"
IgnoreTitlePatches = 1
- autoload nerveunity.wad to doom2unity.wad refers to https://github.com/Doom-Utils/iwad-patches/commit/0b38c442e0fab07e3b88cc541730b508393d7926
2020-02-03 21:03:37 +00:00
Load = "nerve.wad"
- add support for xbox 360 versions of Doom/Doom2
2020-01-20 01:01:06 +00:00
DeleteLumps = "M_EPI1", "M_EPI2", "M_EPISOD"
}
- add Doom2f.wad
2020-01-27 14:13:41 +00:00
IWad
{
Name = "DOOM 2: L'Enfer sur Terre"
Autoname = "doom.id.doom2.commercial.french"
Game = "Doom"
Config = "Doom"
IWADName = "doom2f.wad", 1
Mapinfo = "mapinfo/doom2.txt"
Compatibility = "Shorttex"
MustContain = "MAP01", "WIOBJ"
BannerColors = "ff ff ff", "a8 00 00"
}
- allow the language table to supersede the title patches, if appropriate For the Doom IWADs the provided font looks almost identical to the characters used on the title patches. So, for any level name that got replaced in some language, it will now check if the retrieved name comes from the default table, and if not, ignore the title patch and print the name with the specified font. This also required removing the 'en' label from the default table, because with this present, the text would always be picked from 'en' instead of 'default'. Since 'en' and 'default' had the same contents, in any English locale the 'default' table was never hit, so this won't make any difference for the texts being chosen. Last but not least, wminfo has been made a local variable in G_DoCompleted. There were two places where this was accessed from outside the summary screen or its setup code, and both were incorrect.
2019-02-14 23:29:24 +00:00
// Doom 2 must be last to be checked because MAP01 is its only requirement
Normalize line endings
2016-03-01 15:47:10 +00:00
IWad
{
Name = "DOOM 2: Hell on Earth"
- changed the filter name for Doom IWADs It's "doom.id.doom1/2" instead of "doom.doom1/2" now. The config file's content will be renamed and for lump filtering a fallback has been added - note that you cannot combine both naming schemes! The old one has to be considered deprecated now. This also removes the duplicated content necessitated by the old naming scheme.
2019-04-09 22:15:16 +00:00
Autoname = "doom.id.doom2.commercial"
Normalize line endings
2016-03-01 15:47:10 +00:00
Game = "Doom"
Config = "Doom"
- rewrite of the IWAD loading mechanism. The old code went through a list of predefined file names and looked each of them up in a list of predefined directories until it found a match. This made it nearly impossible to add custom IWAD support because the list of valid file names could not be extended. This has now been switched around to run a scan for matching files on each given directory. With this approach it can look for *.iwad and *.ipk3 as IWAD extensions as well and read an IWADINFO out of these files that can be added to the internal list of IWADs, making it finally possible to define custom IWADs without having to add them to the internal list. (This isn't fully tested yet so some errors may still occur.)
2017-08-19 17:30:48 +00:00
IWADName = "doom2.wad", 1
Normalize line endings
2016-03-01 15:47:10 +00:00
Mapinfo = "mapinfo/doom2.txt"
Compatibility = "Shorttex"
MustContain = "MAP01"
BannerColors = "a8 00 00", "a8 a8 a8"
- allow the language table to supersede the title patches, if appropriate For the Doom IWADs the provided font looks almost identical to the characters used on the title patches. So, for any level name that got replaced in some language, it will now check if the retrieved name comes from the default table, and if not, ignore the title patch and print the name with the specified font. This also required removing the 'en' label from the default table, because with this present, the text would always be picked from 'en' instead of 'default'. Since 'en' and 'default' had the same contents, in any English locale the 'default' table was never hit, so this won't make any difference for the texts being chosen. Last but not least, wminfo has been made a local variable in G_DoCompleted. There were two places where this was accessed from outside the summary screen or its setup code, and both were incorrect.
2019-02-14 23:29:24 +00:00
IgnoreTitlePatches = 1
Normalize line endings
2016-03-01 15:47:10 +00:00
}
- did a bit of cleanup on the MAPINFO organization What could be done has been moved into the filter directory of game_support.pk3 Unfortunately most of the rest is needed as presets even for custom games so it cannot be fully cleaned up, because the dependencies here and the filter structure do not align 100%.
2019-07-16 23:05:58 +00:00
Normalize line endings
2016-03-01 15:47:10 +00:00
Names
- did a bit of cleanup on the MAPINFO organization What could be done has been moved into the filter directory of game_support.pk3 Unfortunately most of the rest is needed as presets even for custom games so it cannot be fully cleaned up, because the dependencies here and the filter structure do not align 100%.
2019-07-16 23:05:58 +00:00
{
- Added Wadsmoosh detection.
2017-01-04 17:47:49 +00:00
"doom_complete.pk3"
Normalize line endings
2016-03-01 15:47:10 +00:00
"doom2.wad"
- add Doom2f.wad
2020-01-27 14:13:41 +00:00
"doom2f.wad"
Normalize line endings
2016-03-01 15:47:10 +00:00
"plutonia.wad"
"tnt.wad"
"doomu.wad"
"doom.wad"
"doom1.wad"
- reordered the IWADs so that the BFG editions are listed after the regular Doom IWADs and Freedoom before Heretic.
2017-05-13 07:44:33 +00:00
"bfgdoom2.wad"
"doom2bfg.wad"
"bfgdoom.wad"
"doombfg.wad"
- add support for xbox 360 versions of Doom/Doom2
2020-01-20 01:01:06 +00:00
"doomxbox.wad"
"doom2xbox.wad"
- update filename for ultimate doom unity edition - add support for tnt/plutonia unity edition - uses same extraction program by kevansevans
2020-01-11 06:18:23 +00:00
"doomunity.wad"
- add support for new Bethesda.Net Unity Edition wads - they can be extracted with this utility: https://github.com/kevansevans/Unity-Doom-Ripper
2020-01-10 21:36:01 +00:00
"doom2unity.wad"
- reordered the IWADs so that the BFG editions are listed after the regular Doom IWADs and Freedoom before Heretic.
2017-05-13 07:44:33 +00:00
"doom2f.wad"
- update filename for ultimate doom unity edition - add support for tnt/plutonia unity edition - uses same extraction program by kevansevans
2020-01-11 06:18:23 +00:00
"tntunity.wad"
"plutoniaunity.wad"
- reordered the IWADs so that the BFG editions are listed after the regular Doom IWADs and Freedoom before Heretic.
2017-05-13 07:44:33 +00:00
"freedoom1.wad"
"freedoom2.wad"
"freedoomu.wad"
"freedoom.wad"
"freedm.wad"
Normalize line endings
2016-03-01 15:47:10 +00:00
"heretic.wad"
"hereticsr.wad"
"heretic1.wad"
"hexen.wad"
"hexdd.wad"
"hexendemo.wad"
"hexdemo.wad"
"strife1.wad"
- reordered the IWADs so that the BFG editions are listed after the regular Doom IWADs and Freedoom before Heretic.
2017-05-13 07:44:33 +00:00
"sve.wad"
Normalize line endings
2016-03-01 15:47:10 +00:00
"strife0.wad"
"strife.wad"
"blasphem.wad"
"blasphemer.wad"
"chex.wad"
"chex3.wad"
"action2.wad"
"harm1.wad"
"hacx.wad"
"hacx2.wad"
"square1.pk3"
- added identification for delaweare.wad to the list of supported IWADs.
2016-06-02 10:04:35 +00:00
"delaweare.wad"
Added support for Rise Of The Wool Ball as IWAD
2017-06-10 13:05:57 +00:00
"rotwb.wad"
- rewrite of the IWAD loading mechanism. The old code went through a list of predefined file names and looked each of them up in a list of predefined directories until it found a match. This made it nearly impossible to add custom IWAD support because the list of valid file names could not be extended. This has now been switched around to run a scan for matching files on each given directory. With this approach it can look for *.iwad and *.ipk3 as IWAD extensions as well and read an IWADINFO out of these files that can be added to the internal list of IWADs, making it finally possible to define custom IWADs without having to add them to the internal list. (This isn't fully tested yet so some errors may still occur.)
2017-08-19 17:30:48 +00:00
}
Order // Order in the IWAD selection box
{
"DOOM: Complete: WadSmoosh"
"DOOM 2: Hell on Earth"
- add Doom2f.wad
2020-01-27 14:13:41 +00:00
"DOOM 2: L'Enfer sur Terre"
- rewrite of the IWAD loading mechanism. The old code went through a list of predefined file names and looked each of them up in a list of predefined directories until it found a match. This made it nearly impossible to add custom IWAD support because the list of valid file names could not be extended. This has now been switched around to run a scan for matching files on each given directory. With this approach it can look for *.iwad and *.ipk3 as IWAD extensions as well and read an IWADINFO out of these files that can be added to the internal list of IWADs, making it finally possible to define custom IWADs without having to add them to the internal list. (This isn't fully tested yet so some errors may still occur.)
2017-08-19 17:30:48 +00:00
"Final Doom: Plutonia Experiment"
"Final Doom: TNT - Evilution"
"The Ultimate DOOM"
"DOOM Registered"
"DOOM Shareware"
"DOOM 2: BFG Edition"
"DOOM: BFG Edition"
- add support for xbox 360 versions of Doom/Doom2
2020-01-20 01:01:06 +00:00
"DOOM: XBox Edition"
"DOOM 2: XBox Edition"
- add support for new Bethesda.Net Unity Edition wads - they can be extracted with this utility: https://github.com/kevansevans/Unity-Doom-Ripper
2020-01-10 21:36:01 +00:00
"DOOM: Unity Edition"
- update filename for ultimate doom unity edition - add support for tnt/plutonia unity edition - uses same extraction program by kevansevans
2020-01-11 06:18:23 +00:00
"DOOM 2: Unity Edition"
"Final Doom: Plutonia Experiment: Unity Edition"
"Final Doom: TNT - Evilution: Unity Edition"
- rewrite of the IWAD loading mechanism. The old code went through a list of predefined file names and looked each of them up in a list of predefined directories until it found a match. This made it nearly impossible to add custom IWAD support because the list of valid file names could not be extended. This has now been switched around to run a scan for matching files on each given directory. With this approach it can look for *.iwad and *.ipk3 as IWAD extensions as well and read an IWADINFO out of these files that can be added to the internal list of IWADs, making it finally possible to define custom IWADs without having to add them to the internal list. (This isn't fully tested yet so some errors may still occur.)
2017-08-19 17:30:48 +00:00
"Freedoom: Phase 1"
"Freedoom: Phase 2"
"FreeDM"
"Heretic"
"Heretic: Shadow of the Serpent Riders"
"Heretic Shareware"
"Hexen: Beyond Heretic"
"Hexen: Deathkings of the Dark Citadel"
"Hexen: Demo Version"
"Strife: Quest for the Sigil"
"Strife: Veteran Edition"
"Strife: Teaser (Old Version)"
"Strife: Teaser (New Version)"
"Blasphemer"
"Chex(R) Quest"
"Chex(R) Quest 3"
"Action Doom 2: Urban Brawl"
"Harmony"
"Hacx: Twitch'n Kill"
"Hacx 2.0"
"The Adventures of Square"
"The Adventures of Square (Square-ware)"
"Delaweare"
"Rise Of The Wool Ball"
Normalize line endings
2016-03-01 15:47:10 +00:00
}
Reference in a new issue Copy permalink