176f95cc7c
FreeBSD has supported printing backtraces for years. The API is the same as on Linux, the only difference is that libexecinfo must be linked as a seperate library. Since the last FreeBSD version with backtrace support (FreeBSD 9.3) went out of support some time ago unconditionally enable the printing. |
||
|---|---|---|
| src | ||
| stuff | ||
| .gitignore | ||
| CHANGELOG | ||
| CMakeLists.txt | ||
| CONTRIBUTE | ||
| LICENSE | ||
| Makefile | ||
| README.md | ||
Yamagi Quake II
This is the Yamagi Quake II Client, an enhanced version of id Software's Quake II with focus on offline and coop gameplay. Both the gameplay and the graphics are unchanged, but many bugs if the last official release were fixed and some nice to have features like widescreen support and a modern OpenGL 3.2 renderer were added. Unlike most other Quake II source ports Yamagi Quake II is fully 64 bit clean. It works perfectly on modern processors and operating systems. Yamagi Quake II runs on nearly all common platforms; including FreeBSD, Linux, OpenBSD, Windows and OS X (experimental).
This code is build upon Icculus Quake II, which itself is based on Quake II 3.21. Yamagi Quake II is released under the terms of the GPL version 2. See the LICENSE file for further information.
Installation
Yamagi Quake II is installed in 3 steps:
- Game data setup.
- Music extraction.
- Download and extract the executables.
Game data Setup
Over the years Quake II was distributed in a myriad of ways:
- As a demo version.
- As a retail release on CD.
- As part of Quake IV.
- Through steam.
- On GOG.com
- etc.
Yamagi Quake II supports all of these version, even the rather limited demo. Full versions require about 1.6 GiB hard drive space, the demo version about 150 Mib.
Full versions
The easiest way to install a full version of Quake II is to start with the patch. Please note that the patch is required for all full versions of the game, even the newer ones like Steam. Without it Yamagi Quake II will not work!
- Download the patch: https://deponie.yamagi.org/quake2/idstuff/q2-3.20-x86-full-ctf.exe
- Extract the patch into an empty directory. The patch is just an ordinary self-extracting ZIP file. On Windows it can be extracted by double clicking on it, on other systems an archiver or even the unzip command can be used.
Now it's time to remove the following files from the extracted patch. They're the original executables, documentation and so on. They aren't needed anymore:
- 3.20_Changes.txt
- quake2.exe
- ref_gl.dll
- ref_soft.dll
- baseq2/gamex86.dll
- ctf/ctf2.ico
- ctf/gamex86.dll
- ctf/readme.txt
- ctf/server.cfg
- xatrix/gamex86.dll
- rogue/gamex86.dll
Copy the pak0.pak file and the video/ subdirectory from your Quake II distribution (CD, Steam or GOG download, etc) into the baseq2/ subdirectory of the extracted patch.
If you have the optional addons you'll need to copy their gamedata too:
- For The Reckoning (also know as "xatrix") copy the pak0.pak and the video/ subdirectory from your addon distribution into the xatrix/ subdirectory.
- For Ground Zero (also known as "rogue") copy the pak0.pak and the video/ subdirectory from your addon distribution into the rogue/ subdirectory.
The demo version
- Get the demo from https://deponie.yamagi.org/quake2/idstuff/q2-314-demo-x86.exe and extract it. It's just an ordinary, self-extract ZIP file. On Windows it can be extracted by double clicking on it, on other system an archiver or even the unzip command can be used.
- Create a new directory and a subdirectory baseq2/ in it.
- Copy the pak0.pak and the players/ subdirectory from Install/Data/baseq2/ into the newly created baseq2/ subdirectory.
The demo must not be patched! Patching the demo will break it!
Music extraction
The retail CD version of Quake II and both addons contain up to 11 Audio CD tracks, forming the soundtrack. Since modern computers lack the ability for classic Audio CD playback, it's emulated by a transparent combination of CD ripping and playback. The tracks can be ripped into OGG/Vorbis files. Yamagi Quake II will use these files instead of the CD tracks.
Later Quake II version, for example the one included with Quake IV and the one available through Steam, lack the soundtrack. Nevertheless Yamagi Quake II can play it if you copy the files into the directories mentioned above.
The GOG.com version is special, it includes the soundtrack as OGG/Vorbis files, but in a non standard format. This is supported by Yamagi Quake II, see below for details.
Using a generic CD extractor / CD ripper
- Install a CD extractor (for example CDex) and set it to OGG/Vorbis files.
- Put the Quake II CD into your CD drive and extract the files.
- The files must be named after the CD track: Track 02 becomes 02.ogg, track 03 becomes 03.ogg and so on. On both the Quake II and the Addon CDs track 01 is the data track and thus can't be ripped.
- Put these files into the corresponding subdirectory:
- baseq2/music for Quake II.
- xatrix/music for The Reckoning.
- rogue/music for Ground Zero.
Extracting music on BSD, Linux and OS X
An easy way to extract the music on unixoid platforms is to use stuff/cdripper.sh, a simple shellscript we provide. It needs cdparanoia and oggenc from the vorbis-tools package installed. Use your package manager of choice (apt-get, dnf, homebrew, pkg, ...) to install them. Just execute the script and copy the resulting music/ directory to:
- baseq2/ for Quake II.
- xatrix/ for The Reckoning.
- rogue/ for Ground Zero.
The GOG.com version
The Quake II distributed by GOG.com contains the soundtrack, it just needs to be copied into the game data directory. The target dir is just music/, next to baseq2/. Not inside baseq2/.
Download and extract the executables
How the Yamagi Quake II executables are installed depends on the platform:
- For Windows a package with all Yamagi Quake II executables is provided. There're two executables in the package. yquake.exe is the Yamagi Quake II client and should be preferred. quake2.exe is a simple wrapper, it's only provided to stay compatible with existing setups.
- Some Linux distributions and BSD systems provide Yamagi Quake II packages.
- On OS X you need to compile from source.
- Of course Yamagi Quake II can be compiled from source on all platforms.
Microsoft Windows
- Get the latest release from https://www.yamagi.org/quake2
- Extract it into the gamedata directory created above. quake2.exe must be placed next to the baseq2/ subdirectory.
On Windows Yamagi Quake II is fully portable, you can move the installation directory wherever and whenever you like. To update Yamagi Quake II just overwrite the old files with the new ones.
Binary Package from your Linux distribution or BSD system
Many Linux distributions and BSD systems provide Yamagi Quake II packages. Please refer to the documentation of your distribution or system. The gamedata is searched at:
- A global directory specified by the package.
- The same directory as the quake2 executable.
- In $HOME/.yq2
- The directory given with the -datadir /path/to/quake2_installation/ commandline argument.
If you're a package maintainer, please look at our documentation at https://github.com/yquake2/yquake2/blob/master/stuff/packaging.md
Compiling from source
To compile Yamagi Quake II from source, you need the following dependencies, including development headers:
- A GCC-compatible compiler like GCC, MinGW (see below) or Clang.
- GNU make or cmake.
- A libGL implementation with OpenGL system headers.
- SDL 2.0.
- libogg, libvorbis and libvorbisfile.
- A OpenAL implementation, openal-soft is highly recommended.
- zlib.
Yamagi Quake II has 2 build systems:
- A classic GNU Makefile.
- A CMakeFile.
Both build system provide the same options and features, it's up to the user to decide which one to use.
On Linux distribution or BSD systems
On debian based distributions (including Ubuntu and Mint) the dependencies can
be installed with: apt-get install build-essential libgl1-mesa-dev libsdl2-dev libogg-dev libvorbis-dev libopenal-dev zlib1g-dev
On OS X we recommend using Homebrew - https://brew.sh - to install the
dependencies: brew install sdl2 libvorbis libogg openal-soft
On FreeBSD you'll need something like: pkg install gmake libGL sdl2 libogg libvorbis openal-soft
On Windows
On Windows a MinGW environment is needed. A preinstalled environment with all dependencies can be found at https://deponie.yamagi.org/quake2/windows/build/ Just extract it into *C:\MSYS2* and start either the 32 bit or 64 bit version through C:\MSYS2\msys32.exe or C:\MSYS2\msys64.exe. With the preinstalled MinGW environment GNU Make is highly recommended, CMake requires further configuration. At this time Yamagi Quake II can't be compiled with Microsoft Visual Studio.
Compiling
Download the latest release from https://www.yamagi.org/quake2 or clone the source from https://github.com/yquake2/yquake2.git, change into the yquake2/ source directory and type make. After the build finished copy everything from the release/ directory to your Yamagi Quake II installation directory.
For the addons download or clone their source, change into the source directory and type make. After the compilation finishes the release/game.so is copied to the corresponding directory in your Quake II installation.