# Yamagi Quake II Console Variables This lists explains most console variables (cvars) added by Yamagi Quake II. Most of the original clients (Vanilla Quake II) cvars are still in place, however due to architectural changes some of them have been renamed. The prefixes are: * No prefix: General stuff. * `cl_`: Client. * `gl_`: Common to all OpenGL renderers. * `gl1_`: OpenGL 1.4 and OpenGL ES1 renderers. * `gl3_`: OpenGL 3.2 and OpenGL ES3 renderers. * `ogg_`: Ogg/Vorbis music playback. * `r_`: Common to all renderers. * `s_`: Sound system. * `sw_`: Software renderer. * `vid_`: Video backend. All cvars may be given at command line through `+set cvar value` or typed into the console. The console can be opended with *Left Shift + Esc*. Keep in mind that some cvars need quotation marks around the arguments. When giving such cvars at the command line the argument string must be surrounded by ticks. For example `+set sv_maplist '"q2dm1 q2dm2"'`. ## Command line arguments These are not console variables, they cannot be entered into the console, only be given through the command line at startup. While cvars are prefixed with a `+`, arguments are starting with a `-`. For example it's `+set busywait 0` (setting the `busywait` cvar) and `-portable` (setting the `portable` argument). * **cfgdir**: The name (not the path) of the configuration directory. * **datadir**: Directory from which the game data is loaded. Can be used in startup scripts, to test binaries, etc. If not set, the directory containing the binaries is used. * **portable**: Makes Quake II portable, all runtime data like the the config, savegames and so on is stored next to the executable and not in the users home directory. ## General * **aimfix**: Fix aiming. When set to to `0` (the default) aiming is slightly inaccurate, bullets and the like have a little drift. When set to `1` they hit exactly were the crosshair is. * **busywait**: By default this is set to `1`, causing Quake II to spin in a very tight loop until it's time to process the next frame. This is a very accurate way to determine the internal timing, but comes with a relatively high CPU usage. If set to `0` Quake II lays itself to sleep and tells the operating system to send a wakeup signal when it's time for the next frame. The latter is more CPU friendly but can be rather inaccurate, especially on Windows. Use with care. * **cl_maxfps**: The approximate framerate for client/server ("packet") frames if *cl_async* is `1`. If set to `-1` (the default), the engine will choose a packet framerate appropriate for the render framerate. See `cl_async` for more information. * **cl_async**: Run render frames independently of client/server frames. If set to `0`, client, server (gamecode) and the renderer run synchronous, (like Quake2 originally did) which means that for every rendered frame a client- and server-frame is executed, which includes the gamecode and physics/movement-simulation etc. At higher framerates (above 95 or so) this leads to movement bugs, like being able to jump higher than expected (kind of like the infamous Quake 3 125Hz bug). For `cl_async 0`, *vid_maxfps* (or, if vsync is enabled, the display refresh rate) is used and *cl_maxfps* is ignored. If *cl_async* is set to `1` (the default) the client is asynchronous, which means that there can be multiple render frames between client- and server-frames. This makes it possible to renderer as many frames as desired without physics and movement problems. The client framerate is controlled by *cl_maxfps*, the renderer framerate is controlled by *vid_maxfps*. As client/server frames ("packet frames") are only run together with a render frame, the *real* client/server framerate is always rounded to a fraction of the renderframerate that's closest to *cl_maxfps*. So if for example *vid_maxfps* is `60` and *cl_maxfps* is `50`, it will be rounded to `60` and every renderframe is also a packet frame. If *vid_maxfps* is `60` and *cl_maxfps* is `40`, it will be rounded to `30` and every second render frame is also a packet frame. It seems like the best working packet framerate is `60` (which means that the render framerate should be a multiple of that), otherwise values between `45` and `90` seem to work ok, lower and higher values can lead to buggy movement, jittering and other issues. Setting *cl_maxfps* to `-1` (the default since 8.02) will automatically choose a packet framerate that's *both* a fraction of *vid_maxfps* (or display refreshrate if vsync is on) *and* between 45 and 90. * **cl_http_downloads**: Allow HTTP download. Set to `1` by default, set to `0` to disable. * **cl_http_filelists**: Allow downloading and processing of filelists. A filelist can contain an arbitrary number of files which are downloaded as soon asthe filelist is found on the server. Set to `1` by default, set to `0` to disable. * **cl_http_max_connections**: Maximum number of parallel downloads. Set to `4` by default. A higher number may help with slow servers. * **cl_http_proxy**: Proxy to use, empty by default. * **cl_http_show_dw_progress**: Show a HTTP download progress bar. * **cl_http_bw_limit_rate**: Average speed transfer threshold for `cl_http_bw_limit_tmout` variable. Set `0` by default. * **cl_http_bw_limit_tmout**: Seconds before the download is aborted when the speed transfer is below the var set by `cl_http_bw_limit_rate`. Set `0` by default. * **cl_kickangles**: If set to `0` angle kicks (weapon recoil, damage hits and the like) are ignored. Cheat-protected. Defaults to `1`. * **cl_laseralpha**: Controls how see-through laserbeams are. The value ranges from 0.0 to 1.0, from completely invisible to completely opaque. So higher value means better visibility. Defaults to `0.3`. * **cl_limitsparksounds**: If set to `1` the number of sound generated when shooting into power screen and power shields is limited to 16. This works around global volume drops in some OpenAL implementations if too many sounds are played at the same time. This was the default behavior between Yamagi Quake II 7.10 and 7.45. Defaults to `0`. * **cl_loadpaused**: If set to `1` (the default) the client is put into pause mode during single player savegame load. This prevents monsters and the environment from hurting the player while the client is still connecting. If set to `2` the client stays in pause mode after loading. If set to `0` pause mode is never entered, this is the Vanilla Quake II behaviour. * **cl_model_preview_start**: Start frame value in multiplayer model preview. `-1` - don't show animation. Defaults to `84` for show salute animation. * **cl_model_preview_end**: End frame value in multiplayer model preview. `-1` - don't show animation. Defaults to `94` for show salute animation. * **cl_nodownload_list**: Whitespace separated list of substrings, files having one these strings in their name are never downloaded. Empty by default. Note that some substrings are always forbidden, for security reasons these cannot be overridden: '.dll', '.dylib' and '.so' to prevent downloading of libraries which could be injected into the Yamagi Quake II process. '..' or ':' inside filenames and '/' or '.' at the beginning of filenames to prevent downloading files into arbitrary directories. * **cl_r1q2_lightstyle**: Since the first release Yamagi Quake II used the R1Q2 colors for the dynamic lights of rockets. Set to `0` to get the Vanilla Quake II colors. Defaults to `1`. * **cl_showfps**: Shows the framecounter. Set to `2` for more and to `3` for even more informations. * **cl_showspeed**: Shows the players speed. Set to `1` to display both overall speed and (horizontal speed) in Quake Units (QU) respectfully at the top right corner of the screen. Set to `2` to show only the horizontal speed under the crosshair. * **cl_unpaused_scvis**: If set to `1` (the default) the client unpause when the screen becomes visible. * **in_grab**: Defines how the mouse is grabbed by Yamagi Quake IIs window. If set to `0` the mouse is never grabbed and if set to `1` it's always grabbed. If set to `2` (the default) the mouse is grabbed during gameplay and released otherwise (in menu, videos, console or if game is paused). * **singleplayer**: Only available in the dedicated server. Vanilla Quake II enforced that either `coop` or `deathmatch` is set to `1` when running the dedicated server. That made it impossible to play single player campaigns over the dedicated server. When set to `1`, both `coop` and `deathmatch` are forced to `0` and `maxclients` is forced to `1`. This can be used to run a dedicated server with an old single player mod, where the source code isn't available, inside a Windows 98 or XP VM and connect over network from an non Windows system. * **coop_pickup_weapons**: In coop a weapon can be picked up only once. For example, if the player already has the shotgun they cannot pickup a second shotgun found at a later time, thus not getting the ammo that comes with it. This breaks the balancing. If set to `1` a weapon can be picked up if a) the player doesn't have it or b) it wasn't already picked up by another player. Defaults to `1`. * **coop_elevator_delay**: In coop it's often hard to get on the same elevator together, because they're immediately triggered once the first player steps on it. This cvar sets a delay for the elevator to wait before moving, so other players have some time to get on it. Defaults to `1.0` (seconds). * **coop_baseq2 (Ground Zero only)**: In Ground Zero, entity spawnflags (which difficulty modes / game modes level entities spawn in) are interpreted a bit differently. In original Quake 2, if an entity is set to not spawn on any difficulty, it is treated as deathmatch-only, however, in Ground Zero this same condition is treated as coop-only. This causes maps made for original Quake 2, including the entire Quake 2 campaign, to not work correctly when played in Ground Zero in co-op mode. This cvar, when set to 1, restores the original interpretation and enables you to play original Quake 2 maps in Ground Zero co-op. Though keep in mind that Ground Zero maps will not work correctly when this cvar is enabled so remember to disable it again before playing Ground Zero maps in co-op. By default this cvar is disabled (set to 0). * **g_commanderbody_nogod**: If set to `1` the tank commanders body entity can be destroyed. If the to `0` (the default) it is indestructible. * **g_footsteps**: If set to `1` (the default) footstep sounds are generated when the player is on ground and faster than 255. This is the behaviour of Vanilla Quake II. If set to `2` footestep sound always generated as long as the player is on ground. If set to `3` footsteps are always generated. If set to `0` footstep sounds are never generated. Cheat protected to `1`. Note that there isn't a reliable way to figure out if the player is on ground. Footsteps may not be generated in all circumstances, especially when the player is moving over stairs and slopes. * **g_monsterfootsteps**: If set to `1` monster footstep are generated. By default this cvar is disabled (set to 0). Additional footstep sounds are required. See the installation guide for details. * **g_fix_triggered**: This cvar, when set to `1`, forces monsters to spawn in normally if they are set to a triggered spawn but do not have a targetname. There are a few cases of this in Ground Zero and The Reckoning. This cvar is disabled by default to maintain the original gameplay experience. * **g_machinegun_norecoil**: Disable machine gun recoil in single player. By default this is set to `0`, this keeps the original machine gun recoil in single player. When set to `1` the recoil is disabled in single player, the same way as in multiplayer. This cvar only works if the game.dll implements this behaviour. * **g_quick_weap**: If set to `1`, both *weapprev* and *weapnext* commands will "count" how many times they have been called, making possible to skip weapons by quickly tapping one of these keys. By default this cvar is set to `1`, and will only work if the game.dll implements this behaviour. * **g_language**: Default language for ReRelease game, requires `Q2Game.kpf` or other source of `localization/loc_english.txt` like file. Defaults to `english`. * **g_swap_speed**: Sets the speed of the "changing weapon" animation. Default is `1`. If set to `2`, it will be double the speed, `3` is the triple... up until the max of `8`, since there are at least 2 frames of animation that will be played compulsorily, on every weapon. Cheat-protected, has to be a positive integer. As with the last one, will only work if the game.dll implements this behaviour. * **g_disruptor (Ground Zero only)**: This boolean cvar controls the availability of the Disruptor weapon to players. The Disruptor is a weapon that was cut from Ground Zero during development but all of its code and assets were still present in the source code and the released game. This is basically a player-held version of the 2nd Widow boss' tracker weapon - a black-ish ball of energy. When this cvar is set to 1 you can use the "give Disruptor" and "give rounds X" commands to give yourself the weapon and its ammo, and its items, weapon\_disintegrator and ammo\_disruptor, can be spawned in maps (in fact, some official Ground Zero maps contain these entities). This cvar is set to 0 by default. * **game**: current game value, mod name and directory. * **gametype**: replace menu to different mod type without change mod name in game variable. * **maptype**: convert surface map flags from different game on load: * 0: Quake2, * 1: Heretic2, * 2: Daikatana, * 3: Kingpin, * 4: Anachronox. * **nextdemo**: Defines the next command to run after maps from the `nextserver` list. By default this is set to the empty string. * **nextserver**: Used for looping the introduction demos. ## Audio * **al_device**: OpenAL device to use. In most cases there's no need to change this, since the default device is normally the correct choice. * **al_driver**: OpenAL library to use. This is useful if for some reasons several OpenAL libraries are available and Quake II picks the wrong one. The given value is the name of the library, for example `libopenal.so.1`. * **ogg_enable**: Enable Ogg/Vorbis music playback. * **ogg_ignoretrack0**: Normally Quake II disables the background music if a major objective has been archived by setting the music track to 0. Setting this cvar to `1` disables this behavior, the music keeps playing. * **ogg_shuffle**: Ogg/Vorbis playback mode. Supported modes are: `0`: Loop the current track (the default). `1`: Play the current track once, then stop. `2`: Play all available tracks in a linear sequence. `3`: Shuffle through the available tracks, never play the same track twice in a row. `4`: Shuffle through the available tracks, may play the same track multiple times in a row. * **s_doppler**: If set to `1` doppler effects are enabled. This is only supported by the OpenAL sound backend. * **s_openal**: Use OpenAL for sound playback. This is enabled by default. OpenAL gives a huge quality boost over the classic sound system and supports surround speakers and HRTF for headphones. OpenAL is much more reliable than the classic sound system, especially on modern systems like Windows 10 or Linux with PulseAudio. * **s_sdldriver**: Can be set to the name of a SDL audio driver. If set to `auto` (the defailt), SDL chooses the driver. If set to anything else the given driver is forced, regardless if supported by SDL or the platform or not. * **s_underwater**: Dampen sounds if submerged. Enabled by default. * **s_occlusion_strength**: If set bigger than `0` sound occlusion effects are enabled. This is only supported by the OpenAL sound backend. By default this cvar is disabled (set to 0). * **s_reverb_preset**: Enable reverb effect. By default this cvar is disabled (set to `-1`). Possible values: `-2`: Auto reverb effect select, `-1`: Disable reverb effect, `>=0`: select predefined effect. * **cl_audiopaused**: If set to `1` the sounds pause when the game does. ## Graphics (all renderers) * **cin_force43**: If set to `1` (the default) cinematics are displayed with an aspect ratio of 4:3, regardless what the actual windows size or resolution is. * **cl_gun**: Decides whether the gun is drawn. If set to `0` the gun is omitted. If set to `1` the gun is only drawn if the FOV is equal or smaller than 90. This was the default with Vanilla Quake II. If set to `2` the gun is drawn regardless of the FOV. This is the default in Yamagi Quake II. * **fov**: Sets the field of view. * **r_gunfov**: The weapons are rendered with a custom field of view, independently of the global **fov**, so they are not distorted at high FOVs. A value of `75` should look identical to the old code at `fov 90`, it defaults to `80` because that looks a bit better. Set to `-1` for the same value as `fov`. * **horplus**: If set to 1 (the default) the horplus algorithm is used to calculate an optimal horizontal and vertical field of view, independent of the window or screen aspect ratio or resolution. * **r_consolescale** / **r_hudscale** / **r_menuscale** and **crosshair_scale**: Scale the console, the HUD, the menu and the crosshair. The value given is the scale factor, a factor of `1` means no scaling. Values greater `1` make the objects bigger, values lower 1 smaller. The special value `-1` (default) sets the optimal scaling factor for the current resolution. All cvars are set through the scaling slider in the video menu. * **r_customheight** / **r_customwidth**: Specifies a custom resolution, the windows will be *r_customheight* pixels high and *r_customwidth* pixels wide. Set *r_mode* to `-1` to use the custom resolution. * **r_farsee**: Normally Quake II renders only up to 4096 units. If set to `1` the limit is increased to 8192 units. This helps with some custom maps and is problematic with other custom maps. * **r_fixsurfsky**: Some maps misuse sky surfaces for interior lighting. The original renderer had a bug that made such surfaces mess up the lighting of entities near them. If set to `0` (the default) the bug is there and maps look like their developers intended. If set to `1` the bug is fixed and the lighting correct. * **r_vsync**: Enables the vsync: frames are synchronized with display refresh rate, should (but doesn't always) prevent tearing. Set to `1` for normal vsync and `2` for adaptive vsync. * **r_anisotropic**: Anisotropic filtering. Possible values are dependent on the GPU driver, most of them support `1`, `2`, `4`, `8` and `16`. Anisotropic filtering gives a huge improvement to texture quality by a negligible performance impact. * **r_msaa_samples**: Full scene anti aliasing samples. The number of samples depends on the GPU driver, most drivers support at least `2`, `4` and `8` samples. If an invalid value is set, the value is reverted to the highest number of samples supported. Especially on OpenGL 3.2 anti aliasing is expensive and can lead to a huge performance hit, so try setting it to a lower value if the framerate is too low. * **r_videos_unfiltered**: If set to `1`, don't use bilinear texture filtering on videos (defaults to `0`). * **r_2D_unfiltered**: If set to `1`, don't filter textures of 2D elements like menus and the HUD (defaults to `0`). * **r_lerp_list**: List separated by spaces of 2D textures that *should* be filtered bilinearly, even if `r_2D_unfiltered` is set to `1`. * **r_nolerp_list**: List separated by spaces of textures omitted from bilinear filtering (mostly relevant if `r_2D_unfiltered` is `0`). Used by default to exclude the console and HUD font and crosshairs. Make sure to include the default values when extending the list. * **r_retexturing**: If set to `1` (the default) and a retexturing pack is installed, the high resolution textures are used. * **r_scale8bittextures**: If set to `1`, scale up all 8bit textures. * **r_shadows**: Enables rendering of shadows. Quake IIs shadows are very simple and are prone to render errors. * **r_showtris**: Show rendered triangles boarders. * **vid_displayrefreshrate**: Sets the displays refresh rate. The default `-1` let the game determine the refresh rate automatically. Often the default setting is okay, but some graphics drivers report wrong refresh rates. For example 59hz are reported while the display has 59.95hz. * **vid_gamma**: The value used for gamma correction. Higher values look brighter. The OpenGL 3.2 OpenGL ES3 and Vulkan renderers apply this to the window in realtime via shaders (on all platforms). When the game is build against SDL2, the OpenGL 1.4 renderer uses "hardware gamma" when available, increasing the brightness of the whole screen. On MacOS the gamma is applied only at renderer start, so a `vid_restart` is required. When the game is build against SDL3, the OpenGL 1.4 renderer doesn't support gamma. Have a look at `gl1_overbrightbits` instead. This is also set by the brightness slider in the video menu. * **vid_fullscreen**: Sets the fullscreen mode. When set to `0` (the default) the game runs in window mode. When set to `1` the games switches the display to the requested resolution. That resolution must be supported by the display, otherwise the game tries several steps to recover. When set to `2` a fullscreen window is created. It's recommended to use the displays native resolution with the fullscreen window, use `r_mode -2` to switch to it. * **vid_highdpiaware**: When set to `1` the client is high DPI aware and scales the window (and thus the requested resolution) by the scaling factor of the underlying display. Example: The displays scaling factor is 1.25 and the user requests 1920x1080. The client will render at 1920\*1.25x1080\*1.25=2400x1350. When set to `0` the client leaves the decision if the window should be scaled to the underlying compositor. Scaling applied by the compositor may introduce blur and sluggishness. Currently high dpi awareness is only supported under Wayland. Defaults to `0` when build against SDL2 and to `1` when build against SDL3. * **vid_maxfps**: The maximum framerate. *Note* that vsync (`r_vsync`) also restricts the framerate to the monitor refresh rate, so if vsync is enabled, the game won't render more than frame than the display can show. Defaults to `300`. Related to this: *cl_maxfps* and *cl_async*. * **vid_pauseonfocuslost**: When set to `1` the game is paused as soon as it's window looses focus. It will work only in situation were the game can be paused, e.g. not in multiplayer games. Defaults to `0`. * **vid_renderer**: Selects the renderer library. Possible options are `gl3` (the default) for the OpenGL 3.2 renderer, `gles3` for the OpenGL ES3 renderer, gl1 for the original OpenGL 1.4 renderer and `soft` for the software renderer. * **r_dynamic**: Enamble dynamic light in gl1 and vk renders. * **r_flashblend**: Flash blend enable in gl1, gl3 and vulkan. ## Graphics (GL renderers only) * **gl_zfix**: Sometimes two or even more surfaces overlap and flicker. If this cvar is set to `1` the renderer inserts a small gap between the overlapping surfaces to mitigate the flickering. This may make things better or worse, depending on the map. * **gl_polyblend**: Toggles the palette blending effect, a.k.a. the "flash" you see when getting injured or picking up an item. In GL1 is also used for looking underwater. Default is `1` (enabled). * **gl_texturemode**: How textures are filtered. - `GL_NEAREST`: No filtering (using value of *nearest* source pixel), mipmaps not used - `GL_LINEAR`: Bilinear filtering, mipmaps not used - `GL_LINEAR_MIPMAP_NEAREST`: The default - Bilinear filtering when scaling up, using mipmaps with nearest/no filtering when scaling down Other supported values: `GL_NEAREST_MIPMAP_NEAREST`, `GL_NEAREST_MIPMAP_LINEAR`, `GL_LINEAR_MIPMAP_LINEAR` * **gl_version_override**: Override required by render OpenGL version, should be used only for debug purpose and useful if OpenGL implementation does not report required version and implements required by render extensions. - `0`: check required version of OpenGL, - `1`: render will try to run with OpenGL 1.0, - `2`: render will try to run with OpenGL 2.0, - `3`: render will try to run with OpenGL 3.0, - `4`: render will try to run with OpenGL 4.0. ## Graphics (OpenGL 1.4 and OpenGL ES1 only) * **gl1_intensity**: Sets the color intensity. Must be a floating point value, at least `1.0` - default is `2.0`. Applied when textures are loaded, so it needs a `vid_restart`. * **gl1_multitexture**: Enables (`1`, default) the blending of color and light textures on a single drawing pass; disabling this (`0`) does one pass for color and another for light. Requires a `vid_restart` when changed. * **gl1_overbrightbits**: Enables overbright bits, brightness scaling of lightmaps and models. Higher values make shadows less dark. Possible values are `0` (no overbright bits), `1` (more correct lighting for liquids), `2` (scale lighting by factor 2), and `4` (scale by factor 4). Applied in realtime, does not need `vid_restart`. * **gl1_particle_square**: If set to `1` particles are rendered as squares. * **gl1_stencilshadow**: If `gl_shadows` is set to `1`, this makes them look a bit better (no flickering) by using the stencil buffer. Does not work when `gl1_stereo` is `3`, `4` or `5`. * **gl1_lightmapcopies**: When enabled (`1`), keep 3 copies of the same lightmap rotating, shifting to another one when drawing a new frame. Meant for mobile/embedded devices, where changing textures just shown (dynamic lighting) causes slowdown. By default in GL1 is disabled, while in GLES1 is enabled. Needs `gl1_multitexture 1` & `vid_restart`. * **gl1_discardfb**: If `1`, clear color, depth and stencil buffers at the start of a frame, and discard them at the end if possible. If `2`, do only depth and stencil, no color. Increases performance in mobile / embedded. Default in GL1 is `0`, while in GLES1 is `1`. ## Graphics (OpenGL 3.2 and OpenGL ES3 only) * **gl3_debugcontext**: Enables the OpenGL 3.2 renderers debug context, e.g. prints warnings and errors emitted by the GPU driver. Not supported on macOS. This is a pure debug cvar and slows down rendering. * **gl3_intensity**: Sets the color intensity used for 3D rendering. Similar to OpenGL 1.4 `gl1_intensity`, but more flexible: can be any value between 0.0 (completely dark) and 256.0 (very bright). Good values are between `1.0` and `2.0`, default is `1.5`. Applied in realtime via shader, so it does not need a `vid_restart`. * **gl3_intensity_2D**: The same for 2D rendering (HUD, menu, console, videos) * **gl3_overbrightbits**: Enables overbright bits, brightness scaling of lightmaps and models. Higher values make shadows less dark. Similar to OpenGL 1.4 `gl1_overbrightbits`, but allows any floating point number. Default is `1.3`. In the OpenGL 3.2 renderer, no lighting fixes for water are needed, so `1.0` has no special meaning. * **gl3_particle_size**: The size of particles - Default is `40`. * **gl3_particle_fade_factor**: "softness" of particles: higher values look less soft. Defaults to `1.2`. A value of `10` looks similar to the OpenGL 1.4 particles. * **gl3_particle_square**: If set to `1`, particles are rendered as squares, like in the old software renderer or Quake 1. Default is `0`. * **gl3_colorlight**: When set to `0`, the lights and lightmaps are colorless (greyscale-only), like in the original soft renderer. Default is `1`. * **gl3_usefbo**: When set to `1` (the default), an OpenGL Framebuffer Object is used to implement a warping underwater-effect (like the software renderer has). Set to `0` to disable this, in case you don't like the effect or it's too slow on your machine. ## Graphics (Software only) * **sw_gunzposition**: Z offset for the gun. In the original code this was always `0`, which will draw the gun too near to the player if a custom gun field of view is used. Defaults to `8`, which is more or less optimal for the default gun field of view of 80. * **sw_colorlight**: enable experimental color lighting. ## Game Controller * **in_initjoy**: Toggles initialization of game controller. Default is `1`, which enables gamepad usage; `0` disables its detection at startup. Can only be set from command line. * **in_sdlbackbutton**: Defines which button is used in the gamepad as the `Esc` key, to pull the main menu and 'cancel' / 'go back' on its options. Valid values are `0` = Back / Select / Minus, `1` = Start / Menu / Plus (default), or `2` = Guide / Home / PS. Requires a game restart, or gamepad replug, when changed. * **joy_layout**: Allows to select the stick layout of the gamepad. - `0`: *Default*, left stick moves, right aims - `1`: *Southpaw*, same as previous one with inverted sticks - `2`: *Legacy*, left moves forward/backward and turns, right strafes and looks up/down - `3`: *Legacy Southpaw*, inverted sticks version of previous one - `4`: *Flick Stick*, left stick moves, right checks your surroundings in 360º, gyro required for looking up/down - `5`: *Flick Stick Southpaw*, swapped sticks version of last one * **joy_left_deadzone** / **joy_right_deadzone**: Inner, circular deadzone for each stick, where inputs below this radius will be ignored. Default is `0.16` (16% of possible stick travel). * **joy_left_snapaxis** / **joy_right_snapaxis**: Ratio on the value of one axis (X or Y) to snap you to the other. It creates an axial deadzone with the shape of a "bowtie", which will help you to do perfectly horizontal or vertical movements the more you mark a direction with the stick. Increasing this too much will reduce speed for the diagonals, but will help you to mark 90º/180º turns with Flick Stick. Default `0.15`. * **joy_left_expo** / **joy_right_expo**: Exponents on the response curve on each stick. Increasing this will make small movements to represent much smaller inputs, which helps precision with the sticks. `1.0` is linear. Default `2.0` (quadratic curve). * **joy_flick_threshold**: Used only with Flick Stick, specifies the distance from the center of the stick that will make the player flick or rotate. Default `0.65` (65%). * **joy_flick_smoothed**: Flick Stick only, rotations below this angle (in degrees) will be smoothed. Reducing this will increase responsiveness at the cost of jittery movement. Most gamepads will work nicely with a value between 4.0 and 8.0. Default `8.0`. * **gyro_mode**: Operation mode for the gyroscope sensor of the game controller. Options are `0` = always off, `1` = off with the `+gyroaction` bind to enable, `2` = on with `+gyroaction` to disable (default), `3` = always on. * **gyro_turning_axis**: Sets which gyro axis will be used for turning. The default `0` is "yaw" (turn), for people who prefer to hold their controller flat, like using a pointing device. `1` is "roll" (lean), for people who hold the controller upright, or use a device with the controller attached to the screen, e.g. Steam Deck. * **gyro_tightening**: Threshold of rotation in degrees per second, where gyro inputs below it will be dampened. Meant to counter a noisy gyro and involuntary hand movements. Default `3.5`. * **gyro_calibration_(x/y/z)**: Offset values on each axis of the gyro which helps it reach true "zero movement", complete stillness. These values are wrong if you see your in-game view "drift" when leaving the controller alone. As these vary by device, it's better to use 'calibrate' in the 'gamepad' -> 'gyro' menu to set them. * **joy_haptic_magnitude**: Haptic magnitude value, By default this cvar is `0.0` or disabled. Valid values are positive, e.g. 0..2.0. * **joy_haptic_filter**: List of sound file names produced haptic feedback separated by space. `*` could be used for replace part of file name as regular expression. `!` at the beginning of value could be used for skip file name equal to value. * **joy_haptic_distance**: Haptic maximum effect distance value, By default this cvar is `100.0`. Any positive value is valid. E.g. effect of shoot to a barrel has 58 points when player stay near the barrel. * **s_feedback_kind**: Select kind of controller feedback to use. By default this cvar is `0`. Possible values: `0`: Rumble feedback, `1`: Haptic feedback. ## cvar operations cvar operations are special commands that allow the programmatic manipulation of cvar values. They can be used for scripting and the like. * **dec [val]**: Decrements the given cvar by `1` or the optional value `val`. * **inc [val]**: Increments the given cvar by `1` or the optional value `val`. * **reset **: Reset the given cvar to it's default value. * **resetall**: Reset all known cvar to their default values. * **toggle [val0] [val1]**: Toggle the given cvar between `0` and `1`. If the optional arguments `val0` and `val1` are given the given cvar is toggled between them.