In lower mines you can drop a rock onto a tank by using a lever.
This was broken, the rock exploded instead of dropping, because debris
is spawned and that debris was solid.
Now the debris is not solid anymore (like it was up to
b4d16ab6b3
"Some additions to last commit:") and it works again
The original client crashed (or survived by pure luck) when muzzle
flash offsets >210 were send. Our fix was to bail out, but that broke
some buggy mods... So just return and print an optional debug message.
This fixes issue #153.
This step height is used by several evelators, leading to stuttering due
to misspredictions. Additionally half height steps weren't smoothed by
the synchronous client.
Predicting these steps leads to a heavily stuttering elevator in
hangar1. I think that steps between 94 and 98 can't appear on stairs, so
just remove them. If I'm wrong we need a hack to the hack ontop of the
hack... ^^
This fixes#119. As always I've chosen the least invasive way to solve
this problem. Trying to open players/$model/trix.md2 is hack, but solves
the problem without changes to filesystem.c and it's API.
With vsync enabled the render times of consecutive frames can diverge.
The first frame arrives right at the next display frame and is rendered
without waiting time. The next frame has to wait 20ms. The leads to some
problems with the move prediction if the client is asynchronous. Fix
this by capping the desired frame rate at the display refresh rate. Also
make sure that the network framerate is never higher then the renderer
framerate.
With the commit the timing is always correct:
* With no limit as much frames as possible are rendered. In this case
rfps > nfps and everything's good.
* With vsync enabled rfps > nfps or rfps == nfps is given. Also rfps
will never exceed the display refresh rate.
* On slow hardware either rfps > nfps or an implicit rfpc == nfps is
given.
While the bugfix in a6f4a3b made the steping prediction working for
stairs, elevators are still stuttering. r1q2s code solves this problem
and is a little bit faster. Use it instead.
Yesterday I chose setting cl_async to 0 since I saw some movement
changed with the async client enabled. Especially when clipping against
bevels the game started to stutter and there were small rendering
problems. After some debugging I realized that it is caused by slight
inaccuracies in the move prediction. When cl_maxfps is too low, the
movement error between two render frames becomes to big, leading to
misspositions. There're two ways to solve this problem:
* Processing more client frames. Most async clients I've looked on
process 60 or even 90 render frames. I chose to stay at 60 since
I was unable to see differences with higher rates.
* Changed to pmove.c and the pmove_t struct. Some multiplayer focused
clients go that way. But there's a very high of breaking singleplayer
movement and pmove_t is part of the server <-> game API. Additionally
the network code must / should be altered. So this is unsuitable for
YQ2.
Please note that there's still a change in movement. Before 4ae8706 and
when cl_async is set to 0 movement is dependend on the render framerate.
At low framerate bevel clipping isn't working too good, at high
framerates prediction causes physics changes like the famous 125hz bug.
With cl_async set to 1 the network framerate is stable, leading to a
more consistant behahiour.
Most (all?) clients implement the synchronous and the asynchronous
client by seperate code pathes. Instead of doing that we force the
asynchronous path to process one network frame for each render frame.
We're missusing the current frame to pass data from the input subsystem
to the movement prediction without a server frame. While we can use the
current frame for the movements itself, it's not finished and thus
unsuitable for stair step prediction. Also oldframe is determined
wrongly. As a result the player "jumps" over stairs.
This is a slighty revised version of id Software original code. Icculus
code may have some advantages on broken drivers or underpowered GPUs.
Today it's just a performance hook. This is a first step in fixing #147.
This is more than enough for everyone and prevents wasting CPU time.
Without this change as many client frames as possible are rendered,
Quake II uses a complete core.
This is based on work submitted by Scott "pickle" Smith. It's said that
vertex arrays are somewhat faster and more compatible than the old way.
This may remove support of some very, very old GPUs like the Riva128.
This is more less cosmetics since gl_tex_solid_format == GL_RGB and
GL_LIGHTMAP_FORMAT == GL_RGBA. No measurable FPS change on Nvidia and
Intel. Based upon the OpenGL ES patch by Scott "pickle" Smith.
This is based upon the original OpenGL ES patch by Scott "pickle"
Smith. This change gives about the same frame rate on an 750TI but
about 3% more frames on an Ivy Bridge IGP with Mesa3D...
This is largely based upon the cl_async 1 mode from KMQuake2, which in
turn is based upon r1q2. The origins of this code may be even older...
Different to KMQuake2 the asynchonous mode is not optional, the client
is always asynchonous. Since we're mainly integrating this rather
fundamental change to simplify the complex internal timing between
client, server and refresh, there's no point in keeping it optional.
The old cl_maxfps cvar controls the network frames. 30 frames should be
enough, even Q3A hasn't more. The new gl_maxfps cvar controls the render
frames. It's set to 95 fps by default to avoid possible remnant of the
famous 125hz bug.
I'm not quite sure if this really makes a difference. But it's the only
idea I have regarding several "Quake II hangs at shutdown when OpenAL is
run with Pulseaudio backend" bugs.
The game code does not include common.h, so it needs to redo this
part for builds without SOURCE_DATE_EPOCH, where BUILD_DATE will
not have been passed in from the outside.
Signed-off-by: Simon McVittie <smcv@debian.org>
In Linux distributions, having the executable depend on the right
libraries and arrange for them to be installed is straightforward,
and there's a lot of infrastructure for tracking which library
version a particular executable needs, including making sure we have
a version that contains all of the symbols that were used. Loading
libopenal at runtime defeats that infrastructure.
The ability to substitute a different-but-compatible libopenal,
or operate with reduced functionality without libopenal, might
still be desirable for generic/portable binary releases.
The CMake build system already linked the executable to
${OPENAL_LIBRARY} anyway, so it is already a hard dependency in that
build system.
For deterministic/reproducible builds (where the same source and
toolchain can be verified to produce the same binary, allowing
maliciously substituted binaries to be detected) it is desirable to
take the software's idea of the build date from the build system;
otherwise, the real-time clock at the time of building affects the
result, making it non-reproducible.
SOURCE_DATE_EPOCH is a distribution-neutral specification for how
to do that. It is meant to be set by meta-build systems such as
dpkg or RPM, using a date/time that is already part of the source code,
for example the date of the latest git commit, the date in
the package's debian/changelog, or the date in the RPM spec file.
See https://reproducible-builds.org/specs/source-date-epoch/ for the
specification of SOURCE_DATE_EPOCH, or https://reproducible-builds.org/
for more information on reproducible builds in general.
The old whitelist was a leftover from the early days of YQ2. It should
run on most / all architectures, as long SDL supports them. As suggested
by smcv in issue #138 generate the OSTYPE and ARCH defines by the build
system instead of hardcoding it.
Savegame compatibility is provided by bumping the savegame version. Old
savegames are compared against the old OSTYPE and ARCH defined, new ones
against the new defines. This compatibility code should be removed
somewhere in the distant future.
Hardware gamma is broken, especially in fullscreen, and a Mac user told me
that setting HW/screen gamma on OSX is a bad idea anyway, because it resets
the monitor calibration.
The game /should/ look ok with vid_gamma 1 (if your display is configured
properly), but if you think it's too dark set it a bit higher and do
vid_restart.
Multitexturing was enabled by default in 0f7b422. It gives a small but
on todays hardware neglectable performance boost, but caused several
problems over the years. For example gl_showtris doesn't work with it
and there's at least one render glitch in city3.bsp.
not sure if this has any drawbacks, seems to work good so far.
No idea why id apparently deactivated this at some point, maybe to
optimize performance?
turns out the if the console is opened while no game is currently
running, cls.key_dest is not key_console but still key_game.
Changing it to key_console in those cases blows up in interesting ways.
So in Char_Event() we send events to the console in those cases.
The first row of AZERTY-Keyboards (used in France and Belgium) doesn't
have numbers as keys but ², &, é, ", ', (, -, è, _, ç, à, ), =
(with small differences between France and Belgium).
For some of those keys we don't have keycodes - and neither does SDL2.
See also https://bugzilla.libsdl.org/show_bug.cgi?id=3188
As a workaround, just map those keys to 1, 2, ..., 9, 0 anyway, as those
are keys Quake2 already knows (and those chars are printed on the keys
too, for typing they're reachable via shift).
This workaround only works for SDL2, as SDL1.2 doesn't have scancodes
which we need scancodes to identify the keys.
While at it I unified handling of SDL_KEYDOWN and SDL_KEYUP, the code
is almost identical anyway, apart from one bool argument to Key_Event().
We track this problem in #81
This clamps the UI scale, limiting the relative size of the UI
elements to what they would be at scale 1 in a 320x240 resolution.
Allowing bigger scales is not useful, and would make it possible
for the user to shoot him-/herself in the foot by setting a
"too big" UI scale value in the menu. (Since this would mess up
the menu, it could be hard te recover from for a casual user.)
AL_PlayChannel() is only called by AL_AddLoopSounds() and
S_IssuePlaysound() - but only the latter set a volume there.
Because of that, loopsounds weren't hearable anymore after the last
commit which removed adding s_volume to all volumes in AL_PlayChannel().
This is fixed by setting the volume for looped sounds in
AL_AddLoopSounds() as well.
Looped sounds don't seem to have a customizable volume and are always
played at full volume (the volume is only changed by distance, but
OpenAL does that automatically).
The CD music enable / disable box wasn't used by many users for two
reasons: CD music playback needs a CDROM drive with analog output.
Such drives aren't available for at least 10 years. And CD music is
unsupported with SDL2. A OGG volume slider is much more usefull.
Con_DrawConsole() assumed that the version string was always 21chars
long, we changed it to allow longer strings with other lenghts.
In Unix main() we changed the code for underlining
"Yamagi Quake II $version" with === so the underlining is as long
as the underlined string.
It was a wrong (and maybe stupid) assumption, that the config dir
(~/.yq2) is always the first element of the search path. When there's
at least one pak file in the config dir, it's added at a random
location. Work around this by probing all directories. This fixes
issue #107.
Moving the check under the "do we have the file localy" check prevents
spurious "Refusing to download a path with .." messages with some game
data. The tank commander skin is one example. This change has no
security impact since FS_LoadFile() just opens and closes the file.
While at it tighten the condition to prevent pathes with colons (this
condition is added at the server side, too) and pathes starting with
slashes and dots.
When the keypad was activated key presses were processed twice.
Once as a normal char event and once as a key event (not marked
as special). The key event to console character translation
function turned the key event into a second character...
The savegame list is generated by calling FS_FOpenFile() for each
possible savegame name. When a file handle is returned the savegame
exists, otherwise the savegame slot is empty. But FS_FOpenFile()
searches in every directory known to the VFS. If a savegame file
isn't found in $moddir but in baseq2, the file in baseq2 is opened
and a baseq2 savegame is displayed in the mods / addons savegame menu.
The fix is compromise between a clean solution and invasiveness:
- Refactor FS_FOpenFile() to include FS_FOpenFileRead(). FS_FOpenFile()
was used only to open read only files, limit its's possibilities to
do exactly that.
- Introduce a new flag "gamedir_only" to FS_FOpenFile(). When true
only the gamedir directories are searched and not other directories
like baseq2.
- Change all callers to FS_FOpenFile()s new signature.
- Use the new gamedir_only flag to limit the searchpath for savegames
to the gamedir.
This makes it behave a little more like -basedir in Quake 1 and
fs_basepath in ioquake3.
This lets "+set basedir" take precedence over the SYSTEMDIR,
which is useful if you have the demo and full-game data installed
in different base directories to be able to test the demo for
regressions.
Without this change the conditionals at g_misc.c:199 and 381 wouldn't
trigger until level.framenum reach it's previous value, resulting in
much to few debris or gibs being thrown. This fixes#104.
Many thanks to maraakate for the analysis and the idea how to fix it.
OpenAL sources are reused in Quake2, so if a source has once been used
for a sound coming from the view entity, it'd stay relative, unless
told not to.
So now I set source's AL_SOURCE_RELATIVE to AL_TRUE or AL_FALSE in
AL_PlayChannel(), depending on the source coming from the player or not.
Thanks a lot to Tommi Teistelä for identifying the problem and pushing
me in the right direction!
This reverts commit 123e409a2e.
This commit breaks several float calculations in subtiles ways. For
example grenates drift to the left. In fact, it's another example why
I'm so hesitant to merge anything that's not a fix for a clearly
reproducable bug. This fixes#99.
should hopefully fix#93, which seemed to be caused by ^ and ` being
bound to toggleconsole in default.cfg (as shipped with Q2) *and*
in code, so it'd be called twice and cancel each other out.
It even warns if someone tries to bind those keys and includes an ugly
hack to *not* warn when it's done in default.cfg, to minimize confusion.
OGG_OpenName(): add ogg_ignoretrack0 cvar to set whether we respect
default playback behaviour when track 0 is requested to be played via
standard cd audio playback.
Submitted by: ewe2
This work was submitted by Dmitry Antipov. We stick to macros instead of
inline functions since they're in line with the rest of the code base.
This patch removes several unused functions and tranfers most of the
rest into macros.
