SDL_WINDOW_FULLSCREEN changes the display resolution if the requested
resolution is different to the actual resultion. SDL_WINDOW_FULLSCREEN_
DESKTOP doesn't do that, it places a smaller or bigger render area
somewhere inside the fullscreen area. This is somewhat nicer with modern
high resolution flatscreens.
This commit changes vid_fullscreen 1 from SDL_WINDOW_FULLSCREEN to
SDL_WINDOW_FULLSCREEN_DESKTOP. Additional vid_fullscreen 2 is
implemented, it uses SDL_WINDOW_FULLSCREEN to create the fullscreen
area.
TL;DR: Use vid_fullscreen 1 to keep the current resolution or use
vid_fullscreen 2 to switch the resolution.
Implementation details: The whole fullscreen stuff is a horrible mess.
Like generations of hackers before me I'm not desperated enough to clean
it up. GLimp_InitGraphics() is modified to take the fullscreen mode as
an integer and not as a boolean. That's a change to the renderer API.
In GLimp_InitGraphics() the needed SDL fullscreen mode flag is
determined once at the top and just used further down below. That saves
dome SDL1 <-> SDL2 compatibility cruft. IsFullscreen() was modified to
return the actual fullscreen mode and not just if fullscreen is enabled.
Several platforms - OpenBSD being a prominent example - don't provide a
way to get the executable path. Don't abort, just return the current
dir ./ executable dir. This is just a work around, of course. The user
needs to supply a script that calls ./quake2 in the correct directory.
The big problem with the old implementation was that stdout.txt and
stderr.txt on Windows became available when nearly all the low level
initialization was already done. Regardless if the client was in
normal or in portable mode.
Solve this by scanning the command line for the string '-portable'. If
it's not found, stdout and stderr are redirected as early as possible.
If found the global variable (*sigh*) is_portable is set to true. It's
evaluated later on to set the cvar 'portable', which in turn is used
be the filesystem to decide if the home directory should be added to
the search path.
Maybe we should remove the cvar and stick to the global variable.
While at it change the maximum path length for qconsole.log from
MAX_QPATH to MAX_OSPATH. At least on my Linux laptop MAX_QPATH is
too short.
This commit is still untested on Windows!
A new linked list fs_rawPath with nodes of type fsRawPath_t is added.
The new function FS_BuildRawPath() fills it at filesystem initialization
with the raw search path directories. Later FS_BuildGenericSearchPath()
and FS_BuildGameSpecificSearchPath() use it to derive the actual search
directories.
Remove all functions that are no longer used:
* FS_AddGameDirectory()
* FS_SetGameDir()
* FS_AddHomeAsGameDirectory()
* FS_AddBinaryDirAsGameDirectory()
While at it try remove as much global variables from filesystem.c as
possible. Also fix a small, longstandig bug: The download code should
treat .zip and .pk3 files as pak files and not as normal directories.
Refactor FS_SetGamedir() into FS_BuildGameSpecificSearchPath(). The new
function removes the specialized part of the search path if necessary
and create a new specialized part based upon the given directory. It
uses the FS_AddDirToSearchpath() function added in the last commit.
This moves the code used to add a directory and it's paks to the search
path into one well defined function FS_AddDirToSearchPath(). Also create
a new function FS_BuildGenericSearchPath() that builds the generic part
of the global search path. This obsoletes several other, specialized
functions. They'll be removed in a later commit.
This prevents Windows from scaling our (fullscreen) window to crap if
the whole desktop is scaled and we're rendering more than 1080p. This is
believed to fix#208.
if that cvar is set to 1, particles aren't rendered as nice circles, but
as squares, like in the software renderer or in Quake1.
Also documented it in cvarlist.md and fixed some typos there
The model shadows are rendered after all entities are rendered.
This fixes them making entity brushes below them translucent (#194)
The model rendering code used lots of global variables, many of them
totally superfluous (esp. currententity, currentmodel).
I refactored the code to use less global variables (this was at least
partly needed to render the shadows later).
So this looks like lots of changes, but many of them are just using
"entity" instead of "currententity" or "model" instead of "currentmodel"
Like GL1 gl_shadows + gl_stencilshadows: no shadow volumes, but looks
ok apart from standing over edges
The gl_stencilshadows cvar isn't used in GL3, it always uses the stencil
buffer if available (and if gl_shadows != 0)
This still needs performance optimizations: Like the GL1 impl it takes
lots of draw calls per model, it could be done with one per model like
when rendering the actual model.
there have been complaints that those things look too bright, so let
people configure their intensity independently of the general intensity
used for levels, monsters etc.
fixes#189
When applied to y SURF_FLOWING textures are scrolled into the wrong
direction. I guess that in GL1 the offset is also applied to x.
This fixes issue #186.
Sometimes cinematics are skipped after the first frame even if the
player didn't press any key. I'm unable to reliable reproduce that,
so my educated guess is that one or more events are still waiting in
SDLs event queue.
For example, during intermission IN_Update() is not called for 5
seconds, key presses by impatient players are just added to the queue
and not processed. The first event is used to skip leave the
intermission, the second event skips the cinematic...
Fix this by implementing a new function IN_FlushQueue() to flush SDLs
event queue and calling it when starting cinematic playback. Yes, this
is just another layer violation. :(
When the client is paused (either explicit or by entering the menu or
console) the cinematic is paused, too. Therefor no more sound samples
are generated and added to the playback queue, the existing samples are
played over and over again. Until now these samples weren't hearable,
because OpenAL marked them as processed and AL_StreamUpdate() removed
them from OpenALs playback queues. This changed in the previous commit,
now the stay in OpenALs queue and are hearable.
Fix this by calling AL_UnqueueRawSamples() when the menu or console is
entered during cinematic playback.
Newer openal-soft versions changed the way how the processed buffers are
counted when in AL_STOPPED state. Previously only processed buffers were
counted, now all buffers are. Change our unqueue logic to match this new
behavior.
This was debugged and fixed @xorw, I'm just committing the patch. This
closes issue #185.
For some reasons setting the MSAA fails at window creation and not at
GL context creation. And of course SDL is unable to detect before, that
the requested number of MSAA samples is invalid... Implement a work
around: Fall back to gl_msaa_samples == 0 if the window cannot be
created.
Resurrect support for render / refresher loadable libraries and use them to implement an experimental OpenGL 3.2 renderer. Please note that the new renderer interface is somewhat different from the original one, old render libraries will NOT work!
there's a target_secret (with targetname "t117"), but no one triggers
it - that's why the help computer shows four secrets, but you can only
get three of them.
Now when you open the door in front of the hidden secret armor
(by shooting it), it'll trigger the target_secret and you can get all
four secrets.
fixes#182
The internal order of the items is determined by Menu_AddItem() and
not the y position. Without this change the cursor didn't jump from
item to item, but from the mode list box to the aspect list box,
skipping the brightness slider.
- Bump vid_gamma to 1.2 in both GL1 and GL3. A default value of 1.0 is
too dark.
- Lower gl3_overbrightbits to 1.3, the previous value of 1.5 was too
bright. This can be seen in later units, for example on mine1 some
textures blended into white.
- Lower gl3_particle_size to 40. A value of 60 may be okay, but with
gl3_particle_fade_factor 1.2 the particles take up too much screen
estate in close range combat.
With this changes GL3 looks (at least for me) nearly the same as GL1
rendered through the removed multitexturing path.
Without capping the brightness entity models may fade into pure white
which looks ugly. This can be seen when several flyer fire blaster
bolds onto the player or when multiple barrels are exploding. This
change was suggest by @DanielGibson, I'm just the messenger.
I really don't see why this constraint was ever necessary. It leads to
one line of pixels not rendered either at the bottom or the right edge
of the screen. In GL1 for whatever reasons this line is just black, in
GL3 garbage is drawn.
In SCR_DrawFieldScaled() the HUD scale factor wasn't taken into account
when calculating the screen area affected by the change. Therefor wrong
coordinates were passed to SCR_AddDirtyPoint() and a part of the changed
area wasn't marked dirty, leading to render artifacts.
This bug was present since HUD scaling was first introduced.
the flash should only be drawn in the part of the window where actual
3D rendering happens, not in the borders added if viewsize < 100
(and apparently also for with 1 pixel width if the resolution is odd).
* gl3_particle_size: in GL3 the particles should be a bit bigger because
the particles fade out towards the edge, so I put it in a seperate
CVar
* gl3_intensity: in GL3 the intensity can have any floating point value,
in GL1 only integers, so it gets its own CVar
* gl3_overbrightbits: gl_overbrightbits had to be 1, 2 or 4, in GL3 it
can have any floating point value.
Changed the particle scaling a bit so they look bigger.
One problem was that GL3_Shutdown() called several functions that use
that gl* function pointers - not a good idea if InitContext() failed
and the function pointers are all NULL. So check for that.
Similarly in GL3/R_ShutdownWindow() calling glClear() etc.
Another problem was that R_SetMode() would, if R_SetMode_impl() failed,
try again with a "safe" resolution (640x480 unless we had another
working resolution before) - which is bad if we're already using that
"safe" resolution because then GLimp_InitGraphics() would check mode
and fullscreen and decide it hasn't changed and do nothing and return
true, which would make SetMode() believe everything is fine and
afterwards all hell breaks loose.
This makes the fragment shader faster by skipping lights that haven't
marked this surface in GL3_MarkLights()
This seems to improve performance at least slightly everywhere, but
it really helps *a lot* on integrated intel GPUs like the one on their
Sandy Bridge, Ivy Bride and Haswell CPUs (those are the ones we tested).
adding dot(surfaceNormal, lightToPixelOnSurfaceNormal) to the equation,
should be Phong-y now? Looks good at least.
The Windows AMD legacy driver needed its usual manual padding..
OSX was totally weird.. There were no errors or warnings from OpenGL
at all, but the dynamic lights were just not visible.
After (too long) debugging the shader I figured out that
dynLights[i].lightIntensity was always 1, and thus
'dynLights[i].lightIntensity - distLightToPos - 64' was negative and set
to 0 with max(0, ...).
I still have no idea why that happens, but removing lightIntensity from
the struct, making lightColor a vec4 and using .a for intensity works...
Dynamic lights on normal world brushes work, on brush-based entities
probably not yet properly. For this I need the model matrix in the
shader to transform vertex positions and normals to worldspace
(they already are for world brushes, but not entities that might rotate
and move etc).
Furthermore, while they dynamic lights look nice and smooth they might
need some fine tuning in the shader..
For this to work there are two bigger changes:
* the vertex data for brushes (gl3_3D_vtx_t) now also contains the
vertex normal
- glpoly_t contains array of gl3_3D_vtx_t instead of 7 floats
* 3D shaders now have in vec3 normal, bound to GL3_ATTRIB_NORMAL
* There's a new UBO for light data: uniLights, containing an array of
up to 32 dynamic lights, with data copied from gl3_newrefdef.dlights
..with Radeon 6950 using AMDs legacy driver.
For uploading UBOs it turned out that glBufferData() is faster,
sometimes a lot faster, with several drivers, especially Intel/OSX.
if the lightmap textures are 1024x512 instead of 128x128, all original
Q2 levels will only need one lightmap texture (instead of max 26 or so)
and even maps that needed all 127 (the 128th was the dynamic lightmap)
won't need more than 4.
This should result in less glBindTexture() calls.
(Note: When I wrote "1 lightmap texture" I meant 4, because where the
old renderer dynamically blended the up to 4 lightmaps/surface, I put
them in 4 textures that belong together and are alle passed to and
blended in the fragment shader)
not sure if this is the very best solution..
Every surface can have up to 4 lightmaps.
I now always create 4 lightmaps (in separate textures, so the
corresponding texture coordinates are identical), the "fillers" are
set to 0, so in the shader they won't make a visible difference.
(The shader always adds up lightmaps from 4 textures, but how much
they're actually visible depends on lmScales which also will be set to
0 if "unused")
If all this turns out to be (too) slow, there could be a special case
for surfaces with only one lightmap, I /think/ that's the most common
case by far.
adjusted to new GL3 stuff, of course.
Also, more code for light style/lightmap scale support.
Should probably (maybe) work once we have really have 4 textures
per lightmap id.
(And then of course dynamic lights are still missing)
To be able to test if the game is running portable all checks of the
portable cvar must be done after Cvar_Init(). Instead of redirecting
stdout and stderr as early as possible, delay the redirection right
after Cvar_Init(). After this change the printf() in WinMain() aren't
printed into stdout.txt, but I guess that it isn't a big problem. All
interessting stuff like the search pathes is still there.
Rename fs_portable to portable. It's no longer filesystem specific.
Normally Q2 writes all persistent data (the configurations, saves, etc.)
into a subdirectory in the users $HOME. That can be a problem when the
game is installed onto an thumb drive or something like that. Therefor
provide a cvar fs_portable. When set to 1 the games uses it binary dir
as it's persistent storage location.
Examples:
./quake2 +set fs_portable 1
./quake2 +set basedir ~/games/quake2 +set fs_portable 1
fs_portable is _not_ saved into the config file. It must be set at
every start!
This closed issue #158.
Some people complained about the usage of non busy waits:
* I was told that there's an input lag with nanosleep(). I still doubt
that, but since the problem is easy to solve...
* Some Intel CPUs throttle the GPU if the selected CPU pstate is too
low. This is especially a problem on Haswell mobile CPUs. Keeping
a core busy works around that.
the screenshot command now supports the filetype as optional argument
(just "screenshot" will use tga like before):
"screenshot png" will save the screenshot as PNG, same with jpg, png
and tga.
For jpg, you can even specify the quality, like "screenshot jpg 90"
(the Quality is between 1 and 100, like with libjpeg).
To reduce duplicated code, I addeed Vid_WriteScreenshot() to refimport_t
and implement most of it in the client (vid.c).
The renderer still fetches the raw image data from OpenGL or whatever
and then calls re.VidWriteScreenshot() which will write it to disk in
the format requested by the user.
pass both normal texture and lightmap to shader instead of rendering the
level geometry again with the lightmap and GL_BLEND.
This is not done, some translucent surfaces are buggy now and it's only
static lightmaps. For this to work properly I'll need to add some more
shaders with and without lightmaps and use them accordingly.
For example, translucent surfaces (SURF_TRANS33/66) never have
lightmaps, neither to pertubed ones (SURF_DRAWTURB) like water and lava,
but scrolling surfaces (SURF_FLOWING) like elevators do use lightmaps
(as long as they're not also transulcent or perturbed)...
well, seems to work, but once the lightmaps are rendered with the normal
textured faces, maybe the dynamic part can be done in shader?
(Might even look less blocky, because it's not limited to lightmap
resolution then)
