I don't think that this has any visible effect, but it's saver than
assume that in multiplayer all clients enter the intermission at the
same time. This was reported by maraakate in yquake2 issue #160.
Until now autoexec.cfg was a special case. It was read several
times, whenever the 'game' cvar was altered or when the client was
restarted. But only if it was in the right directory in the right
position of the internal search path... Remove this altogether and
replace it by an ordinary 'exec autoexec.cfg' at startup.
This may break some mods that depend on an autoexec.cfg if the user has
his own version in ~/.yq2/. Such mods should use default.cfg instead.
This closes issue #163.
Multitexturing was never part of any official Quake II release. It was
added in version 3.21, which was released only in source. Over the years
many developers tried to fix multitexturing, including myself. Yamagi
Quake II had it even enabled by default for several releases... But:
* Multitexturing is poorly implemented and **slow**
* Multitexturing leads to render errors, for example in city3
* Multitextring is ortogonal to the normal render path and adds a
lot of special cases to the renderer
Remove it for good. Ciao, it wasn't a nice time. :) The last version
before this commit was at least somewhat fixed, read some of the worst
problems were fixed. If someone's ever going to resurrect it, it would
be a good idea to start at that point.
In baseq2 there's no need to force a certain damage texture on gunners
since there's only one. Also gunners can't wear the powershield so
there's no need to turn it of.
This was noticed by Maraakate.
Otherwise at least one key may be still marked as down causing an
immediate abort of playback. While here be a little bit paranoid
and clean up key states when focus is gained. In theory that's a
no-op.
When the video is scaled through OpenGL we can just throw it on our
vertexes and everything's alright. But when we're softscaling the video
we must consider that the videos size doesn't really match the vertex
size...
especially in the intermission videos, the text looked broken, as parts
of the characters were missing.
This is because Draw_StretchRaw() converts the 320x240 video frame into
a 256x256 texture, without doing proper interpolation (just skipping
some pixels instead).
Now, if the GPU supports non-power-of-two texture sizes, the video
frames are uploaded as textures in their original size.
(Also fixed a harmless typo in common.h)
This crash was found by DanielGibson, he even guessed the right fix
without having a usable coredump. ;) In boss1.bsp Macron is waiting for
the player, despawning as soon as the player moves to him. After that
the player needs to press 2 buttons, each button triggers 3 flyers. If
the player is fast enough, the first bunch of flyers may spawn before
macron is despawned. Now there's a small chance that a flyer decides to
attack macron... If Macron despwans at the the next frame, self->enemy
is set to NULL (Macron is gone) but nevertheless flyer_fire() is called.
The correct fix would be to call flyer_fire() before Macron despawns,
but that's hard to impossible. So take the easy route and check if
self->enemy is not NULL.
This bug was "fixed" by id with removing two lines in the ground entity
check. When cleaning up the game I added them back... I don't know if
it's really correct to just remove them, but let's try it. This fixes
issue #157.
The old implementation had two problems:
* OSTYPE and ARCH are systemwide defines, overriding them may break
the global libc headers. This is a theoretical problem, I've never
seen it in praxis.
* Not all system set ARCH correctly when building in a chroot env.
For example on Linux ARCH is set to x86_64 when building in an
i386 chroot. Now the user can do something like "make YQ2ARCH=i386"
to get things right.
In lower mines you can drop a rock onto a tank by using a lever.
This was broken, the rock exploded instead of dropping, because debris
is spawned and that debris was solid.
Now the debris is not solid anymore (like it was up to
b4d16ab6b3
"Some additions to last commit:") and it works again
The original client crashed (or survived by pure luck) when muzzle
flash offsets >210 were send. Our fix was to bail out, but that broke
some buggy mods... So just return and print an optional debug message.
This fixes issue #153.
This step height is used by several evelators, leading to stuttering due
to misspredictions. Additionally half height steps weren't smoothed by
the synchronous client.
Predicting these steps leads to a heavily stuttering elevator in
hangar1. I think that steps between 94 and 98 can't appear on stairs, so
just remove them. If I'm wrong we need a hack to the hack ontop of the
hack... ^^
This fixes#119. As always I've chosen the least invasive way to solve
this problem. Trying to open players/$model/trix.md2 is hack, but solves
the problem without changes to filesystem.c and it's API.
With vsync enabled the render times of consecutive frames can diverge.
The first frame arrives right at the next display frame and is rendered
without waiting time. The next frame has to wait 20ms. The leads to some
problems with the move prediction if the client is asynchronous. Fix
this by capping the desired frame rate at the display refresh rate. Also
make sure that the network framerate is never higher then the renderer
framerate.
With the commit the timing is always correct:
* With no limit as much frames as possible are rendered. In this case
rfps > nfps and everything's good.
* With vsync enabled rfps > nfps or rfps == nfps is given. Also rfps
will never exceed the display refresh rate.
* On slow hardware either rfps > nfps or an implicit rfpc == nfps is
given.
While the bugfix in a6f4a3b made the steping prediction working for
stairs, elevators are still stuttering. r1q2s code solves this problem
and is a little bit faster. Use it instead.
Yesterday I chose setting cl_async to 0 since I saw some movement
changed with the async client enabled. Especially when clipping against
bevels the game started to stutter and there were small rendering
problems. After some debugging I realized that it is caused by slight
inaccuracies in the move prediction. When cl_maxfps is too low, the
movement error between two render frames becomes to big, leading to
misspositions. There're two ways to solve this problem:
* Processing more client frames. Most async clients I've looked on
process 60 or even 90 render frames. I chose to stay at 60 since
I was unable to see differences with higher rates.
* Changed to pmove.c and the pmove_t struct. Some multiplayer focused
clients go that way. But there's a very high of breaking singleplayer
movement and pmove_t is part of the server <-> game API. Additionally
the network code must / should be altered. So this is unsuitable for
YQ2.
Please note that there's still a change in movement. Before 4ae8706 and
when cl_async is set to 0 movement is dependend on the render framerate.
At low framerate bevel clipping isn't working too good, at high
framerates prediction causes physics changes like the famous 125hz bug.
With cl_async set to 1 the network framerate is stable, leading to a
more consistant behahiour.
Most (all?) clients implement the synchronous and the asynchronous
client by seperate code pathes. Instead of doing that we force the
asynchronous path to process one network frame for each render frame.
We're missusing the current frame to pass data from the input subsystem
to the movement prediction without a server frame. While we can use the
current frame for the movements itself, it's not finished and thus
unsuitable for stair step prediction. Also oldframe is determined
wrongly. As a result the player "jumps" over stairs.
This is a slighty revised version of id Software original code. Icculus
code may have some advantages on broken drivers or underpowered GPUs.
Today it's just a performance hook. This is a first step in fixing #147.
This is more than enough for everyone and prevents wasting CPU time.
Without this change as many client frames as possible are rendered,
Quake II uses a complete core.
This is based on work submitted by Scott "pickle" Smith. It's said that
vertex arrays are somewhat faster and more compatible than the old way.
This may remove support of some very, very old GPUs like the Riva128.
This is more less cosmetics since gl_tex_solid_format == GL_RGB and
GL_LIGHTMAP_FORMAT == GL_RGBA. No measurable FPS change on Nvidia and
Intel. Based upon the OpenGL ES patch by Scott "pickle" Smith.
This is based upon the original OpenGL ES patch by Scott "pickle"
Smith. This change gives about the same frame rate on an 750TI but
about 3% more frames on an Ivy Bridge IGP with Mesa3D...
This is largely based upon the cl_async 1 mode from KMQuake2, which in
turn is based upon r1q2. The origins of this code may be even older...
Different to KMQuake2 the asynchonous mode is not optional, the client
is always asynchonous. Since we're mainly integrating this rather
fundamental change to simplify the complex internal timing between
client, server and refresh, there's no point in keeping it optional.
The old cl_maxfps cvar controls the network frames. 30 frames should be
enough, even Q3A hasn't more. The new gl_maxfps cvar controls the render
frames. It's set to 95 fps by default to avoid possible remnant of the
famous 125hz bug.
I'm not quite sure if this really makes a difference. But it's the only
idea I have regarding several "Quake II hangs at shutdown when OpenAL is
run with Pulseaudio backend" bugs.
The game code does not include common.h, so it needs to redo this
part for builds without SOURCE_DATE_EPOCH, where BUILD_DATE will
not have been passed in from the outside.
Signed-off-by: Simon McVittie <smcv@debian.org>
In Linux distributions, having the executable depend on the right
libraries and arrange for them to be installed is straightforward,
and there's a lot of infrastructure for tracking which library
version a particular executable needs, including making sure we have
a version that contains all of the symbols that were used. Loading
libopenal at runtime defeats that infrastructure.
The ability to substitute a different-but-compatible libopenal,
or operate with reduced functionality without libopenal, might
still be desirable for generic/portable binary releases.
The CMake build system already linked the executable to
${OPENAL_LIBRARY} anyway, so it is already a hard dependency in that
build system.
For deterministic/reproducible builds (where the same source and
toolchain can be verified to produce the same binary, allowing
maliciously substituted binaries to be detected) it is desirable to
take the software's idea of the build date from the build system;
otherwise, the real-time clock at the time of building affects the
result, making it non-reproducible.
SOURCE_DATE_EPOCH is a distribution-neutral specification for how
to do that. It is meant to be set by meta-build systems such as
dpkg or RPM, using a date/time that is already part of the source code,
for example the date of the latest git commit, the date in
the package's debian/changelog, or the date in the RPM spec file.
See https://reproducible-builds.org/specs/source-date-epoch/ for the
specification of SOURCE_DATE_EPOCH, or https://reproducible-builds.org/
for more information on reproducible builds in general.
The old whitelist was a leftover from the early days of YQ2. It should
run on most / all architectures, as long SDL supports them. As suggested
by smcv in issue #138 generate the OSTYPE and ARCH defines by the build
system instead of hardcoding it.
Savegame compatibility is provided by bumping the savegame version. Old
savegames are compared against the old OSTYPE and ARCH defined, new ones
against the new defines. This compatibility code should be removed
somewhere in the distant future.
Hardware gamma is broken, especially in fullscreen, and a Mac user told me
that setting HW/screen gamma on OSX is a bad idea anyway, because it resets
the monitor calibration.
The game /should/ look ok with vid_gamma 1 (if your display is configured
properly), but if you think it's too dark set it a bit higher and do
vid_restart.
Multitexturing was enabled by default in 0f7b422. It gives a small but
on todays hardware neglectable performance boost, but caused several
problems over the years. For example gl_showtris doesn't work with it
and there's at least one render glitch in city3.bsp.
not sure if this has any drawbacks, seems to work good so far.
No idea why id apparently deactivated this at some point, maybe to
optimize performance?
turns out the if the console is opened while no game is currently
running, cls.key_dest is not key_console but still key_game.
Changing it to key_console in those cases blows up in interesting ways.
So in Char_Event() we send events to the console in those cases.
The first row of AZERTY-Keyboards (used in France and Belgium) doesn't
have numbers as keys but ², &, é, ", ', (, -, è, _, ç, à, ), =
(with small differences between France and Belgium).
For some of those keys we don't have keycodes - and neither does SDL2.
See also https://bugzilla.libsdl.org/show_bug.cgi?id=3188
As a workaround, just map those keys to 1, 2, ..., 9, 0 anyway, as those
are keys Quake2 already knows (and those chars are printed on the keys
too, for typing they're reachable via shift).
This workaround only works for SDL2, as SDL1.2 doesn't have scancodes
which we need scancodes to identify the keys.
While at it I unified handling of SDL_KEYDOWN and SDL_KEYUP, the code
is almost identical anyway, apart from one bool argument to Key_Event().
We track this problem in #81
This clamps the UI scale, limiting the relative size of the UI
elements to what they would be at scale 1 in a 320x240 resolution.
Allowing bigger scales is not useful, and would make it possible
for the user to shoot him-/herself in the foot by setting a
"too big" UI scale value in the menu. (Since this would mess up
the menu, it could be hard te recover from for a casual user.)
AL_PlayChannel() is only called by AL_AddLoopSounds() and
S_IssuePlaysound() - but only the latter set a volume there.
Because of that, loopsounds weren't hearable anymore after the last
commit which removed adding s_volume to all volumes in AL_PlayChannel().
This is fixed by setting the volume for looped sounds in
AL_AddLoopSounds() as well.
Looped sounds don't seem to have a customizable volume and are always
played at full volume (the volume is only changed by distance, but
OpenAL does that automatically).
The CD music enable / disable box wasn't used by many users for two
reasons: CD music playback needs a CDROM drive with analog output.
Such drives aren't available for at least 10 years. And CD music is
unsupported with SDL2. A OGG volume slider is much more usefull.
Con_DrawConsole() assumed that the version string was always 21chars
long, we changed it to allow longer strings with other lenghts.
In Unix main() we changed the code for underlining
"Yamagi Quake II $version" with === so the underlining is as long
as the underlined string.
It was a wrong (and maybe stupid) assumption, that the config dir
(~/.yq2) is always the first element of the search path. When there's
at least one pak file in the config dir, it's added at a random
location. Work around this by probing all directories. This fixes
issue #107.
Moving the check under the "do we have the file localy" check prevents
spurious "Refusing to download a path with .." messages with some game
data. The tank commander skin is one example. This change has no
security impact since FS_LoadFile() just opens and closes the file.
While at it tighten the condition to prevent pathes with colons (this
condition is added at the server side, too) and pathes starting with
slashes and dots.
When the keypad was activated key presses were processed twice.
Once as a normal char event and once as a key event (not marked
as special). The key event to console character translation
function turned the key event into a second character...
The savegame list is generated by calling FS_FOpenFile() for each
possible savegame name. When a file handle is returned the savegame
exists, otherwise the savegame slot is empty. But FS_FOpenFile()
searches in every directory known to the VFS. If a savegame file
isn't found in $moddir but in baseq2, the file in baseq2 is opened
and a baseq2 savegame is displayed in the mods / addons savegame menu.
The fix is compromise between a clean solution and invasiveness:
- Refactor FS_FOpenFile() to include FS_FOpenFileRead(). FS_FOpenFile()
was used only to open read only files, limit its's possibilities to
do exactly that.
- Introduce a new flag "gamedir_only" to FS_FOpenFile(). When true
only the gamedir directories are searched and not other directories
like baseq2.
- Change all callers to FS_FOpenFile()s new signature.
- Use the new gamedir_only flag to limit the searchpath for savegames
to the gamedir.
This makes it behave a little more like -basedir in Quake 1 and
fs_basepath in ioquake3.
This lets "+set basedir" take precedence over the SYSTEMDIR,
which is useful if you have the demo and full-game data installed
in different base directories to be able to test the demo for
regressions.
Without this change the conditionals at g_misc.c:199 and 381 wouldn't
trigger until level.framenum reach it's previous value, resulting in
much to few debris or gibs being thrown. This fixes#104.
Many thanks to maraakate for the analysis and the idea how to fix it.
OpenAL sources are reused in Quake2, so if a source has once been used
for a sound coming from the view entity, it'd stay relative, unless
told not to.
So now I set source's AL_SOURCE_RELATIVE to AL_TRUE or AL_FALSE in
AL_PlayChannel(), depending on the source coming from the player or not.
Thanks a lot to Tommi Teistelä for identifying the problem and pushing
me in the right direction!
This reverts commit 123e409a2e.
This commit breaks several float calculations in subtiles ways. For
example grenates drift to the left. In fact, it's another example why
I'm so hesitant to merge anything that's not a fix for a clearly
reproducable bug. This fixes#99.
should hopefully fix#93, which seemed to be caused by ^ and ` being
bound to toggleconsole in default.cfg (as shipped with Q2) *and*
in code, so it'd be called twice and cancel each other out.
It even warns if someone tries to bind those keys and includes an ugly
hack to *not* warn when it's done in default.cfg, to minimize confusion.
OGG_OpenName(): add ogg_ignoretrack0 cvar to set whether we respect
default playback behaviour when track 0 is requested to be played via
standard cd audio playback.
Submitted by: ewe2
This work was submitted by Dmitry Antipov. We stick to macros instead of
inline functions since they're in line with the rest of the code base.
This patch removes several unused functions and tranfers most of the
rest into macros.
This should have been done years ago, .dynlib is the canocial extension
for libraries on OS X. In a broader sense this simplifies the CMake
build system a little bit, since CMake enforces .dynlib for OS X
libraries.
As Jack Whitham noticed [0], animated textures freeze at their first
frame if they're on a transparent surface. This can be seen in base3
(Com Centre), for example. At least for the OpenGL renderer this is
caused by the fact that the animation chain is never forwarded if the
texture is bound to a transparent surface. The fix is to do exactly
that...
I can only speculate why the animations on transparent surfaces were
never used / implemented. Maybe performance issues or it was just
forgotten.
0: http://blog.jwhitham.org/2015/04/more-fun-with-floating-point-numbers.html
sounds easy, right?
Except some genius decided to save CVAR_LATCH cvars in buffers of
MAX_OSPATH length into savegames.. so just changing MAX_OSPATH
breaks savegame compatibility.
Fortunately, this assumption only matters in SV_WriteServerFile() and
SV_ReadServerFile() so I worked around it by introducing a
platform-specific LATCH_CVAR_SAVELENGTH (because MAX_OSPATH was 256 on
Windows but 128 on other systems..)
it's saved in $HOME/.yq2/$mod/history.txt
While I was at it, I made the max number of lines in the history
configurable at compiletime by introducing a NUM_KEY_LINES #define
See https://github.com/yquake2/yquake2/issues/71
and https://github.com/yquake2/xatrix/issues/4
In ClientThink(), the float value ent->velocity[i]*8 is saved into
a short and if the value is too big for a short, in 32bit gcc builds
the short is set to SHRT_MIN, resulting in the player being pressed
down instead of up.
Now we put the result in a 32bit int first (which should be big enough)
and assign the int to the short. This still overflows, but with -fwrapv
at least in a defined way (most probably the same way the original
binaries did).
And while I was at it, when the game lib is loaded, it prints the date
it was built, this is especially interesting for our Win32 binaries.
Daniel is more or less sure that a stuck Alt key can occure if the user
switches through several windows by Alt-Tab. That sounds resonable,
because the keyup event for Alt may happen when the focus is not on
Quake II. In that case SDL2 misses it and for Quake II the key stays
down. Solve this by capturing the focus loss event and mark all keys
as up.
It's apparently not enough to clear key repeats, we'll need to clear
the down states too. Without this Alt stays pressed after toggeling
fullscreen trhough Alt-Enter.
Switching to fullscreen through a SDL2 call is nice, but the renderer
needs to be reinitialized. Without it some things will break, for
example the gamma setting.
No, this is not a rage quit but the result of a long discussion. There
are several reasons for us to drop OS X support:
- OS X support was always more or less hacky. For example is was never
really integrated into the build system and some features like the
OpenAL sound backend never worked well.
- The OS X support never grew into the new world based upon SDL2.
- It was broken since at least Lion which was released 4 years ago.
- None of the developers has a Mac or plans to buy one. Supporting
a software for a platform not used by the developers is more or
less impossible.
- And despite several appeals no one from the OS X community ever
stept up and send patches.
Removed are:
- Makefile support
- The OpenAL quirks
- The Cocoa bindings
- The framworks
Not removed is:
- Savegame support
- Memory management support
- Platform detection
- OpenGL and SDL includes
So, if someone steps up and does a modern, fully integrated port based
upon SDL2 we're happy to merge it back. The requirements are:
- It must be a clean port, without any hacks
- Full build system integration must be provided
- The port must be maintained even after it was merged. At every release
binaries must be build, API / ABI changes with new OS X versions must
be tracked.
Retexturing support is now always on (you can still switch it off with
the gl_retexturing CVAR), as we don't have the additional libjpeg
dependency anymore.
stb_image is used for tga, jpg and the newly supported png, so the
old tga and jpeg loading code has been removed.
I furthermore cleaned up the somehow messy and possibly slightly broken
retexturing selection code in R_FindImage()
Check and use GL_ARB_texture_non_power_of_two and use it if present to allow using all textures unscaled. This makes a huge visual improvement since most skins are not power-of-two textures.
Conflicts:
src/client/refresh/header/local.h
Okay, I tried to solve this issue the gentle way. But apparently it's
not enough to track if a key is down. We must consider if the key is
just down or if it's already repeating... Therefor raise the white flag
and just put the original logic back in place. This may fix issue #57.
When we're building command we must make sure, that all command for
one keystroke will have the timestamp in microseconds. If that's not
the case the command may end up in differend server frames, breaking
things subtile. This may be part of bug #57, but I'm not sure.
This is a less intrusive variant of the old Key_ClearState() function.
When the refresher is restarted or the menu is left, this function is
called to mark all keys as "up". That works around some corner cases
where a key is still marked "down" and thus the first stroke is detected
as a repetition.
This works around a bug in SDL 1.2 were the SDL_EnableUNICODE() state is
reset to false after the window is reacreated. Setting it in the render
backend ensures that no keystrokes are lost. This fixes#56.
- Handling of key combinations like Alt + Return or Shift + Escape
clearly belong into the frontend. Now that the client won't clear
the keystates any more it's save to handle them there.
- The 'force_centerview' command belongs into the client move stuff.
I guess it was part of the backend sinces it messes with mouse
handling. Since the renderer is now part of the client that's not
necessary anymore.
- One can argue that +mlook and -mlook belong into client move stuff,
too. But since we need there calculations in the backend anyway,
leave things like they are.
Until now Quake 2 used keysyms aka key events for everything, including
the console and the chat window. Since key events don't reflect if the
shift key is pressed, Quake 2 needed to convert the lower case chars to
upper case char through a hardcoded table. That lead to the problem that
the keyboard layout was utilised for lower case characters only.
Solve this long standing problem by refactoring both the input backend
and the frontends Key_Event() funktion to use character events for most
input subsystem. Character events are generated by SDL and send the
real character.
An example:
- On german keyboards shift and . is : but Quake 2 generated <.
- Now a character event with : is generated and used.
There are at least 3 disadvantes by this approach:
- The backend needs to tell the frontend if a normal character (ASCII
32 to 126) or a special character is send. Only normal characters can
be treated as character events.
- There may be some differences between the binding of a key seen
through the console and seen by the game. If you have a german
keyboard and bind :, the game may not react to :. This can be worked
around by editing the config file.
- Users may need to rebind some keys.
Please note that Quake 2 can handle ASCII characters only!
In the old times the refresher was a stand alone DLL. For performance
reasons and to avoid laggy input parts of the input system were
implemented in this DLL. Now that the renfresher is part of the main
binary and initialized at client startup we can remove most of the
abstractions between input system, refresher and client. Also the
input system can be treated as a normal subsystem.
Changes:
- Untangle the VID_* stuff and the IN_* stuff. The functions
called by function pointers in in_state are now called directly
and 'struct in_state' was removed.
- Remove input.h and rename the appropriate backend functions.
There's no longer a need for an abstraction layer between the
input backend and the input frontend.
- Move input initialization and shutdown into CL_Init(), like it's
already done for all other subsystems.
- Remove Key_ClearStates(). I'm pretty sure that's a left over from
the old Win 9x backends and unnecessary.
- General cleanup.
In rogue's RHANGAR1 the turret didn't blow up the ceiling when friendly fire
was off, because in ClientTeam() both entities were set to "" (no team),
but OnSameTeam() just did a strcmp() instead of checking this special
case (no team).
We check this now and thus it works. Hooray.
I also refactored ClientTeam() to take the buffer instead of using a
static one and to be static (it's only called by OnSameTeam() anyway).
The savegame table entry for this function was invalid, but it doesn't
need to be saved anyway, so I just deleted it from the table.
Historicaly this functions were used to adjust the cd music volume. In
YQ2 they were converted to enable or disable the cd music. Change their
name to match their current purpose.
This reverts commit 70eef55ab5.
It was premature to merge this commit into HEAD. Maybe we'll try again
one day, but only if a complete and fully working patch with build
system integartion is provided.
COM_FileExtension() was parsing strings from beginning to end, bailing
out as soon as '.' was found and treating everything thereafter as the
file extension. That behavior caused problem with relatives pathes like
models/monsters/tank/../ctank/skin.pcx. The new implementation uses
strrchr() to determine the last '.'.
This fixes issue #48. The bug was introduced in e07294b which replaced
hand rolled code with COM_FileExtention().
This commit has some drawbacks:
- It's rather hacky. The Quake II menu is crap and was never intended
to be scaled. My approach was to add scaling to most of the generic
functions and handle all the special cases in the non generic parts
of the menu. A better solution would require to rewrite at least
parts of the menu. And like it's said in qmenu.c: I won't do that.
- Some menu elements are aligned to the right, others to the left. In
many places magic numbers are used to align elements by hand. This
makes it very hard to impossible to implement a scaling logic which
works in all situations. With this approach most menus look good up
to at least a scaling factor of 3. Especially the "Player Setup"
menu is very problematic at small disalignements are unavoidable.
Please note, that only the menu system itself is scaled. Some elements
like the the "Quit Screen" or the loading plaque are still missing. They
will be done in a later commit.
This change is needed to break a otherwise fatal cycle:
- The renderer calls VID_MenuInit()
- VID_MenuInit() calls SCR_GetMenuScale()
- SCR_GetMenuScale() relies on gl_menuscale which is still
uninitialized at this time.
This integrates the backends for the pandora, gcw and gph written by
Scott "Pickle" Smith. Only the code itself is supplied, but no build
system integration.
This fixes a long standing and until now unnoticed bug with negative
colored dynamic lights. Since we never set the OpenGL renderer as out
renderer, remaining softrenderer code was executed and the corresponding
effects never rendered. This manifested itself in missing darkness
around the "gravity well" in rogue.
Newer jpeg versions (I guess starting with 9) define an macro
"VERSION", colliding with ours. While wie could #undef it, take
the less hacky route and rename it.
Without this define newer versions of jpeg define a type "bool" as char,
while the MinGW headers define it as "unsigned short". Automake should
have detected that, but...
The code used build fine on my workstation, since Mesa3D has the
required macros since ever. But on Windows gl.h is still limited
to OpenGL 1 (really?).
MSAA was a long wanted and often requested feature. Just set set the
desired number of samples with gl_msaa_samples and do a vid_restart.
This code is based upon work done in Hecatomb.
On some systems SDL_SetRelativeMouseMode() can fail under several
circumstances. For example:
- Security software is blocking acces to raw input.
- XInput 2 is unavailable.
- SDL2s configure script has messed up.
Detect those situations and reposition the mouse manually to the
window center after having read it's current state. This fixes
issue #34 an #35.
Input devices should send key events and nothing more. The ability to
add commands into the input buffer was used by the joystick code
(removed long time ago) and as a dirty hack to work around limitations
of DirectInput.
- Remove the keyq. This linked list was used to work around limitations
of the good, old DirectInput API. It's not necessary with SDL.
- Inline some functions to others where apropriate and remove unused
or unnecessary functions.
- Reorder functions into groups.
- Update comments.
This commits still misses necessary changes to the frontend. They'll be
done in subsequential commits.
We had dual precision since ever on 64 bit unixoid systems and it "just
worked". So there should be no reason to still force Windows down to
single precision. The performance impact should be negligible.
This function is only used in cl_view.c, so no need for external
declaration. Reimplement it in a sane and on all platform 64 bit
clean way. This allows us to finally remove the horible INT macro.
Pressing two mouse buttons at the same time didn't work properly, only
one had effect, e.g. when pressing LMB to walk forward and RMB to shoot
(when bound like that...)
Not sure why that was, but the old mouse button handling (inherited from
the super-old win32 backend where it was supposed to work around bugs in
WinAPI or whatever, where sometimes there were two mouse button presses
in one event or something) was unnecessarily complicated anyway so I
replaced it with something simpler.
Make non global functions static, give some better names to variables,
remove unneccessary special cases and remove some superflous functions.
Form most - if not all - users this changes should be a no-op.
Without this change the width of the render windows was required to be a
multiple of 8, making it unable to use strange resolutions like 1366x768.
This change is based upon an idea submitted by "tmcp" in pull request
27.
The quake2 binary now gets -DSDL2 in the CFLAGS, so Win32/OSX can
use different #include paths accordingly.
This is also (ab)used to print which SDL version is used on startup.
Don't use this for anything else, use
#if SDL_VERSION_ATLEAST(2, 0, 0)
instead.
I haven't tested building on/for Win32 or OSX, there may be more
work to do.
Furthermore I added Copyright-Info about CalculateGammaRamp()
in refresh.c (it's from SDL2)
* Fix input issues (mouse-wheel and mouse input)
* SDL2 is not default anymore in the Makefile (use WITH_SDL2=yes)
* If SDL2 is enabled, CD audio is disabled (SDL2 doesn't support
that - use OGG/Vorbis instead)
* Small fix to make it compile with SDL1.2 again
Makefile is adjusted, it compiles and works mostly, but
* For some reason (bug in SDL_GetRelativeMouseState() ?)
mouse input doesn't work properly.. it seems to be bound
to window borders, even if input is grabbed
* some keys can't be used anymore because there's no SDLK_*
for them anymore (gotta find out if this is important)
* Maybe some of the changes need cleanup
Those extensions have become part of ARB about 15 years ago and most if
not all video cards still in use should support the ARB versions. I
believe that at least parts of this code were disfunctional.
This removes the need to define the old qgl function names to the
official OpenGL names. The OpenGL functions are now called directly
without any abstraction.
With this change the "refresh" make target doesn't any longer exists.
It was merged into the "client" target. One will need a "make clean"
before building yQ2 after this change.
This is a manual merge of Hecatomb Q2 ref b8952d5. Manual since git
couldn't do an automerge for some reasons... Notable changes are:
- QGL function pointers are removed, libGL is linked directly
- The OpenGL log framework is removed. It was disfunctional
- The gl_driver cvar is finaly gone
This change is currently untested on Windows and OS. There should
be no problems but a better Makefile integration of libGL is needed.
VID_LoadRefresh with no parameters
VID_LoadRefresh doesn't need a DLL name (because there isn't one)
Rename reflib_active to ref_active
Reference to client input callbacks
All declarations are at the beginning of the file
Full reimplementation of VID_Shutdown
VID_Shutdown does all the refresher cleanup
Reimplementation of VID_FreeReflib
Implementation of VID_LoadRefresh
Normally setting gl_mode cvar would result in VID_LoadRefresh because
of vid_ref being "modified". After removing vid_ref out of the picture
it will "modify" vid_fullscreen to replicate the same behaviour.
Variable "name" (who used to hold refresh dll name) is now left unused
All references to vid_ref cvar has been taken out ...
Revert "change several strcat calls to Q_strlcat calls"
This reverts commit ab879f1bc7.
Revert "change (v)sprintf calls to (v)snprintf calls"
This reverts commit b46e210d76.
Testing showed that after the last round of sound changes FreeBSD is the
only platform with distorted sound when s_volume is set too high. I'm
pretty sure that it's caused by a bug in the OSS backend of openal-soft.
I'll need to analyze this more and maybe write a problem report. Since
FreeBSD users should be experienced enough to lower the volume when
there are problem (there's a FAQ in our README!), use the same default
volume on all platforms.
This check involved an uninitialized pointer, so it never worked. It
could lead to crashes in some situations, especially when clients tried
to reconnect after a manual map change on the dedictated server.
Scott S. pointed out that some the qglTexParameterf calls should be
qglTexParameteri. I don't know if all this changes are correct (I'm
an openGL noob) but they shouldn't make thinks worse and "works for me".
If the volume is set too high the OpenAL backend preamplification leads
to overdriven sound samples. It's not quite understandable to me why
that only happen on platforms other than Linux (maybe a bug in OpenAL?)
and there's not much we can do against it besides reducing the volume.
As the side note: Simmilar behavior can be seen at least in ioQ3 and
dhewm3...
This cvar is a last resort if all other measures to prevent overdriven
preamplifation fail. Setting it to lower value than 1.0 limits the
overall dynamic range, so sound quality is lost. This is especially
hearable when low volume samples are encountered, like the shotgun
combined with the silencer.
The client uses float values between 0.0 and 1.0 to represent the volume
of sound samples. This is the range required by OpenAL. But the generic
part of the sound system multiplied the raw float value with 374 and
clamped it to a full integer. That worked by luck withth the OpenAL
backend but broke at least the silencer powerup. Solve this problem by
adding a new field "float oal_vol" to the channel_t struct and use it to
pass the raw float value to OpenAL.
This fixes issue #18
Since OpenAL 1.15 AL_GAIN has much more weight than before. That leeds
to overdriven effect samples unless the volume control is set to a very
low level. With this change volume can be set to a high level without
distorting. But there's one problem. A division by 2 is to low to rule
distortion out and by 3 the game is a little bit quieter than before. A
value of 2.5 would be optimal but is not applicable since the volume is
represented by an integer. I've choosen 3 to be aon the save side.
As a side note: This problem was very less worse on Linux than on
Windows and FreeBSD. Maybe Linux guys need to pump there volume up
to compensate this work-around.
For ia64 it's necessary to define int as long long instead of long int. I know
this for a fact because pointers that were encoded as long int in my LLVM and
CLIPS bridge would fail horribly when passed out of clips back into LLVM. long
long fixed it.
Defining "qboolean" to something other than an enum changes the size of
some structs. That in turn breaks compatiblity with mods that use the
enum define. With this change the addons (tested with xatrix and rogue)
are running on OS X. Many thanks to my sister for lending me her
Macbook.
If "horplus" is set, the "fov" cvar is interpreted as the horizontal FOV
in a 4:3 screen, and is adapted automatically to the current screen
aspect ratio accordingly. If not set, use the old Vert- approach.
In addition, "horplus" can also be set from the video menu by selecting
the "Auto" option for aspect ratio, which also resets the FOV value to the
standard 90 degrees.
Finally, add a 5:4 aspect ratio (1280x1024) and correct the 16:9 angle
slightly.
These are the code changes and Makefile changes necessary to build and
run Yamagi Quake II on Max OS X. OS X 10.6 or higher is required, older
version may work but we cannot guarantee it. The documentation will be
added in another commit. This patch was contributed by W. Beser, I made
only some small cosmetical changes.
This sanity check caused a too early exit of the function if the player
stood directly in front of a wall and fires the blaster or hyper
blaster. Therefor the wall impact effect wasn't drawn. This commit
fixes issue #6. Many thanks to svdijk for narrowing this problem down to
somewhere between 3.00 and 4.00.
This is necessary since non-base OpenGL functions can't be connected by
calling the standard GetProcAddress() on Windows. To archive this the
old qwglGetProcAdress() is renamed into GetProcAdressGL() and a new
function pointer qwglGetProcAdress is introduced. On unixoid System it's
NULL and on Windows connected to wglGetProcAddress(). If it's NULL the
system wide function is called, if not the function Pointer is used.
To archive this, 3 new functions Sys_GetProcAddress(), Sys_LoadLibrary()
and Sys_FreeLibrary() were added to abstract the library loading code
into a platform independend API.
Using a float number as version number is a bad idea. Correct this long
standing problem by changing it to a string. If we ever want to compare
version numbers, 2 integer constants "MAJOR_VERSION" and "MINOR_VERSION"
should be added.
This update brings some minor bugfixes, especially for big endian
platforms and LLP64 systems like 64 bit Windows. The support for
encrypted ZIP archives was removed. This is a no-op change, since
there was no way to pass the password to uncrypt. Without the
uncrypt code Yamagi Quake II can be distributed in some countries
with special laws for cryptographic software. The LICENSE was
updated to the most recent version of the INFO-ZIP license.
This change allows the usage of old mods without renaming their game
lib. This is applied to windows only because the few Linux mods out
there are broken since a long time due to incompatible changes in libc
and the kernel. Requested by Victor Sergeevich.
qhost was a proprietery management application for Quake II dedicated
servers. Since we don't know if the code is still working and most
likely no one uses it anymore, remove it. This war requested by Daniel.
This was requested by Daniel. While partitional installations were
working, they are another distinction between Linux and Windows and
useless. Everyone should have the ~350MiB for a full installation.
And full installations are much faster.
The "nostdout" cvar was only existent on unixoid platform and
disfunctional. Since the stdout putput is very helpfull when
debugging things, just remove it.
This changes employs a horrible hack to connect the ASCII Quake II to
the UTF-16 WinAPI. The path to "My Documentes" is read in UTF-16, then
converted to a old "DOS style path" with 8.3 characters. This DOS path
has by convention no UTF-16 characters in it and can be converted into
a normal ASCII string. This ASCII string is the path used by Yamagi
Quake II. The conversion logic will fail if the "Windows to DOS
filename transistion" is deactivated in the registry (it's on by
default). In that case no homedir is used and the "Windows Roaming
Mechanism" kicks in.
This is necessary due to the extrem long homedir-pathes in some Windows
localizations. While it would be nice to have the same value on all
platform it would break existing savegames and don't think that it's
worth that.
With this change the homedir is no longer selected in the filesystem,
but in platform dependend functions. This allows us to use WINABI calls
for selection, resulting using the apropriate diretory on localized
versions of Windows XP.
caedes and some other people will probably kill me for this, but I'm the
idiot who has to maintain the code. And that's much easier if it's in a
readable und writeable state.
With sound quality "high" nearly all sound is provided as 16 bit PCM
with 2 channels. Since most players use this setting, provide an optimed
case for it. This should also solve the cracking due to overshot
soundbuffers, which was especially noticeable on Windows. This changes
only effects the old SDL soundbackend and not OpenAL.
Under Windows all config data is written to %USERPROFILE%\AppData\
Local\YamagiQ2. To archive this code was added that translates Windows
pathes with backslashes into Unix pathes with normal slashes.
This is necessary since the default "waveout" driver on windows is
incompatible to Quake II (due to too big output buffers) and "dsound"
can't be forced since it's not available on some installations. The
default driver is choosen by platform:
Windows -> dsound
FreeBSD -> dsp
Linux -> alsa
This file was taken from ioQuake2 and modified to work with Yamagi Quake
II. It may not be perfect yet, but should be good enough to the client
up and running.
This errors are harmless and thrown when the process is already attached
to a console. Since the dedicated server is a console application the
console is created by Windows at startup...
This file was taken from ioQuake2 and refactored to match Yamagi Quake
II. It would be nice to have IPv6 support and to remove the old IPX
cruft, but that happen now.
conproc.c implements support functions for the console windows used by
the dedicated server. It was taken from ioQuake2 and cleaned up for the
inclusion in Yamagi Quake II.
This files contains most support functions for windows and the main
loop. It was taken from Icculus Quake II and cleaned up. This early
version may still have bugs.
This is a sanity check to prevent stupid users from running Quake II as
root or as a setuid binary. Quake II is such a mess that running it as
root or setuid is just reckless.
This is a sanity check to prevent stupid users from running Quake II as
root or as a setuid binary. Quake II is such a mess that running it as
root or setuid is just reckless.
If the game was compiled with openal support (USE_OPENAL is defined),
but it's disabled via cvar (set s_openal 0) there could be segfaults
when calls to openal where done anyway, because the check
if(sound_started == SS_OAL) was forgotten.
This is fixed now.
This fixes a crash in mine4.bsp and most likely some other problems.
The bug was reported by "mxmvasilyev0 [at] gmail [dot] com" and tracked
as Github issue #1.
libopenal is loaded with dlopen() and for all used alBla and alcBla functions
there are function pointers (just like thee qgl stuff for OpenGL).
Thus there's no need to link against libopenal on compile-time.
There were a few occurences of "normal" openal functions (al* instead of qal*)
- they are fixed now.
This allows to use a yquake2 version compield with WITH_OPENAL=yes to be used
on systems that have no libopenal installed (the standard SDL sound backend
will be used then).
Now when some braindead alsa/ladspa plugin calls setlocale(LC_ALL, "") the
locale is (still) set to "C" and not some other locale that may fsck up printf
and scanf formats
QAL_SoundInfo().
- Use QAL_SoundInfo() to print the OpenAL infos
at startup and by the "soundinfo" command.
- Implement printing of all available OpenAL
devices at startup and by the "soundinfo"
command.
used by OGG/Vorbis. 24 buffers are enough for smooth
and stutter free playback and ensure, that OGG_Stop()
is effective nearly immediately.
- Change C99 comments to C89, since snd_vorbis.c is
a C89 file. Caedes will beat me for this :/
Copied and adapted (hopefully) all relevant code from Q2Pro.
Did some small refactorings when needed.
Still TODO:
* Adapt Makefile
* OGG support when using OpenAL
* A cvar that switches between OpenAL and DMA/SDL
* Actually compiling and testing this stuff ;)
creating the maplist each time it's called, but
preserve it across several calls.
- Fix M_PushMenu a second time by taking a corner
case into account when the requested menu is
opened and on the stack but not on top.
set by the OpenGL implementation somewhere in gl.h but apperently
the values are sometimes wrong...
- AND the particle color with 0xFF. This is a no-op with most
OpenGL implementations but may help Mesa3D. Suggest by
"hukaru" on IRC.
- create an unnamed info_player_start when necessary
- increase the fixup radius of the coop-connector to 550
- some formation improvemens
- add SP_CreateUnnamedSpawn to the savegames and break them again
KMQuake2 and trigger activators via cross level triggers. While this
is unused by baseq2 some editors supported this and thus some custom
maps may use it.
bugs were fixed too:
- Comment two lines back in which were removed by id. They
SEEM to bee correct
- Slime shouldn't destroy dead monsters (this was lost some
versions ago)
- Adds a "float volume" argument to snd_dma.c:S_RawSamples()
so that ogg can use it too
- That S_RawSamples now has a volume argument, the
cinematics now honor the volume adjustment instead of
playing at full volume all the time even if volume is
zeroed
- Moves endianism handling from S_RawSamples to codec
level
- Fixes an issue of S_RawSamples with 8 bit stereo samples
(not seen/tested with q2 but with my uhexen2)
- Other minor adjustments
- Support für Big-Endian Pamps (läuft yQ2 auf sowas überhaupt?)
- Unterstützung für 22khz Vorbis-Dateien (ermöglicht es die
Wave-Dateien aus den Pags in Vorbis zu konvertieren, wenn man denn
drauf steht.)
- Unterstützung für Mono-Dateien (Sinnvoll für Handhelds)
Patch von: Ozkan Sezer
rate 8000 ist mehr als ausreichend bei allem, was kein Modem mehr ist.
s_mixahead 0.14 ist besser als 0.2, außer man will ein leichtes soundlag
cl_maxfps auf 60. Das reicht und verhindert bugs
wurde. Diese Zeile war dort kommentiert, wurde von mir aber
unkommentiert, wahrscheinlich ein Flüchtigkeitsfehler. Durch sie wurde
versucht in eine Animation zu springen, die kein Einsprungspunkt ist. Er
wartete ewig auf das Beenden der Animation, der Gegner deadlockte.
Dieser Bug ist auch in Xatrix enthalten.
Heutige Computer sind alle so schnell, dass der Gewinn nahe Null
sein dürfte. Vielleicht ist er durch bessere Compiler sogar
negativ. Außerdem ist der Krams nicht portabel, er läuft
nur unter Winows auf i386 CPUs.
Bei dieser initialen Version handelt es sich um den blanken
Client ohne Renderer und Server und Spiele. Ueberfluessige
Sourcedateien wurden geloescht, einige Dateien so verschoben,
dass sich eine sinnvolle Verzeichnisstruktur ergibt. Zudem wurde
eine neue Makefile erstellt.
