#	MPW adaptation of STLport
#	
#	written by Tsutomu Yoshida, Minokamo, Japan. Aug/14/1998
#	#*TY 05/23/1999 - updated for STLport-3.2
#	#*TY 08/03/1999 - updated for STLport-3.2.1
# 	#*TY 05/21/2000 - updated for STLport-4.0
#	#*TY 05/13/2001 - updated for STLport-4.1
#	
#	this document describes the detailed instructions for building and running the STL testsuite (regression and eh) 
#	as the mpw tools, as well as building STLportLib which provides the standard conforming iostream.


#	*** IMPORTANT NOTES ON ENVIRONMENT CONFIGURATION
#
#	¥ STLport under MPW expects CIncludes folder (or alias of it) be presented at the same level as "stlport" folder.
#	¥ C++ Compilers should be given the chance to search include files in "stlport" folder before searching in "CIncludes" folder.
#	¥ If you use old style STL header (i.e., map.h, etc.), "stoport:old_hp" folder also has to be added in the include 
#		search paths (old style headers are not verified to work. use them on your own risk).
#	¥ This version of STLport uses <exception> header supplied with the package. <exception> supplied elsewhere is not used, 
#		unlike the earlier version of STLport.
#	¥ You may have to increase the stack size of MPW shell since MrCpp's backend uses a lot of stack space for code optimization. 
#		Use a shell command shown below.
	SetShellSize -s 1280k # relaunch of MPW shell required to take effect


#	*** how to setup STL under MPW environment:
#	===============================================================================================================
#	(1) run the MPW script shown below to setup the shell variable {STL} to point to the STLport
#	directory. to run this script, open this file (ReadMe.MPW) under MPW and select the script block below
#	and then press "enter' key (not the 'return' key).
#
#	Note: 	this setup script will install a startup script named "!STL_Folder_SetUp" 
#			under "{ShellDirectory}Startup Items:" directory.
#	
#(# INSTALL (1)
begin
	unset STL # to unconditionally re-setup STL variable
	if !"{STL}"
		Set exit 0
		Set temp "{Boot}"
		unset STL
		if "{active}" =~ /(Å)¨1:Å/
			directory "{¨1}:"
			set temp "{¨1}:::"
			(Set temp `ResolveAlias "{temp}stlport:"`)·dev:null
		end
		Loop
			If  !"`Exists "{temp}stl:_config.h"`"
				Alert "The folder you have chosen, ¶'{temp}¶', does not appear to be the correct STL folder."¶
				"¶nPlease choose the main STLport folder (the folder which contains stl_config.h)."
			Else
				Break
			End
			Set temp "`(GetFileName "{temp}" -q -d -m "Where is your ¶"STLport¶" folder?")³dev:null`"
			exit if !"{temp}"
		End
		Set -e STL "{temp}"
		set STL > "{ShellDirectory}Startup Items:!STL_Folder_SetUp" # save the {STL} setting so that you do not have to run this script every time mpw is booted.
		unset temp
		Set exit 1
	else
		alert "the path to ¶"¶{STL¶}¶" has been set up as: ¶n'{STL}' .¶nMake sure this is up to date."
	end
end ·· "{worksheet}"
#)#

#	===============================================================================================================
#	(2) make alias for the CIncludes folder at the same level as 'stlport' folder.
#
#(# INSTALL (2)
begin
	SendAE -e "FNDRsali" -t "Finder" -----alis "{CIncludes}:CIncludes" ·dev:null 	# create the alias
	set alias_ `exists -a "{CIncludes}:"ÅCIncludesÅ` 								# get the exact name for the alias
	duplicate -y "{alias_}" "{STL}:CIncludes" 										# copy it into the destination
	delete -ay "{alias_}" 															# clean up
end ·· "{worksheet}"
#)#


#	===============================================================================================================
#	(3) OPTIONAL: change the creator of files to MPW, colorize them to Blue and set the default font information
#
#		WARNING: THIS STEP IS QUITE TIME CONSUMING
#
#(# INSTALL (3) OPTIONAL
begin
	set -e exit 0
	if !"{Font}";set -e Font "Monaco";end
	if !"{FontSize}";set -e FontSize 9;end
	set self_ "{active}"
	for f_ in	`exists -f ¶
				"{stl}"[Â.]+ "{stl}"Å.[hc]Å ¶
				"{stl}config:"Å.[hc]Å ¶
				"{stl}old_hp:"Å.[hc]Å ¶
				"{stl}stl:"[Â.]+ "{stl}stl:"Å.[hc]Å ¶
				"{stl}stl:debug:"Å.[hc]Å ¶
				"{stl}stl:wrappers:"Å.[hc]Å ¶
				"{stl}wrap_std:"Å[Â.]+ ¶
				"{stl}wrap_std:h:"Å.[hc]Å ¶
				"{stl}using:"[Â.]+ ¶
				"{stl}using:h:"Å.[hc]Å ¶
				"{stl}:src:"Å.[hc]Å ¶
				"{stl}:test:regression:"Å.[hc]Å ¶
				"{stl}:test:eh:"Å.[hc]Å ¶
				`
		SetFile -a l "{f_}"
		Open -h -r "{f_}"
		Format -l 'C/C++/Objective-C'  -f "{Font}" -s "{FontSize}" "{f_}" 
		Close "{f_}"
		SetFile -c 'MPS ' -label 3 -a L "{f_}"
	end
	for f_ in	`exists -f ¶
				"{stl}:src:"Å.mak ¶
				"{stl}:test:regression:"Å.mak ¶
				"{stl}:test:eh:"Å.mak ¶
				`
		SetFile -a l "{f_}"
		Open -h -r "{f_}"
		Format -l 'MPW Shell Script' -f "{Font}" -s "{FontSize}" "{f_}"
		Close "{f_}"
		SetFile -c 'MPS ' -label 4 -a L "{f_}" # blue color
	end
	open "{self_}"
	SetFile -a l "{self_}"
	Format -l 'MPW Shell Script' -f "{Font}" -s "{FontSize}" "{self_}"
	SetFile -c 'MPS ' -label 6  "{self_}" # sky color
	set -e exit 1
end ·· "{worksheet}"
#)#


#	===============================================================================================================
#	(4) build and install PPC version of STLportLib into "{stl}:lib:" folder. Both debugging and non-debugging versions will be built.
#
#	target compiler: apple's mpw MrCpp 5.0.0 or better
#	
#(# INSTALL (4) PPC STLportLib
begin
	set -e MrCpp `which MrCpp`	# ver.5.0.0 or better is required
	save -a						# save all files (optional)
	directory "{stl}:src:"		# setup the working directory
	target "{worksheet}"
	echo -n "¶n####### START BUILDING PPC VERSION OF STLportLib LIBRARY ####### "; date -s
	unset fullbuild
#	set -e fullbuild "-e"			# uncomment this line to force full build

	for debug_build in '-d DEBUG' ''
		make {fullbuild} {debug_build} install -f "{stl}:src:MrCpp.mak" > MrCpp.MakeIt; execute MrCpp.MakeIt
	end
	echo "Finished building STLportLib (PPC)¶n"
end ·· "{worksheet}"
#)#


#	===============================================================================================================
#	(5) build and install 68K version of STLportLib into "{stl}:lib:" folder. Both debugging and non-debugging versions will be built.
#
#	target compiler: apple's mpw SCpp 8.9.0 or better
#	
#(# INSTALL (5) 68K STLportLib
begin
	set -e SCpp `which SCpp`	# ver.8.9.0 or better is required
	save -a						# save all files (optional)
	directory "{stl}:src:"		# setup the working directory
	target "{worksheet}"
	echo -n "¶n####### START BUILDING 68K VERSION OF STLportLib LIBRARY ####### "; date -s
	unset fullbuild
#	set -e fullbuild "-e"			# uncomment this line to force full build

	set -e other_SCpp_Options "-seg STLPortLib"
	
	for debug_build in '-d DEBUG' ''
		make {fullbuild} {debug_build} install -f "{stl}:src:SCpp.mak" > SCpp.MakeIt; execute SCpp.MakeIt
	end
	unset other_SCpp_Options
	echo "Finished building STLportLib (68K)¶n"
end ·· "{worksheet}"
#)#





#	*** how to try out the regression testsuite (PPC version):
#	===============================================================================================================
#	target compiler: apple's mpw MrCpp 5.0.0
#	
#	(1) run the shell script listed below to compile and link the PPC version of testsuite as the mpw
#	tool by selecting it and press enter.
#
#(# PPC (1) Regression Build
begin
	set -e MrCpp `which MrCpp` # ver.5.0.0 or better is required
	save -a					# save all files (optional)
	directory "{stl}:test:regression:"		# setup the working directory
	target "{worksheet}"
	echo -n "¶n####### START BUILDING PPC VERSION OF STL REGRESSION TEST SUITE ####### "; date -s
	unset other_STL_Options
	unset other_MrCpp_Options
	unset fullbuild
#	set -e fullbuild "-e"			# uncomment this line to force full build
	unset debug_build
	set -e debug_build '-d DEBUG'	# uncomment this line to build non-debug version
	make -w {fullbuild} {debug_build} Regression_test -f "{stl}:test:regression:MrCpp.mak" > MrCpp.MakeIt
	set -e exit 0
	execute MrCpp.MakeIt
	set -e exit 1
end ·· "{worksheet}"
#)#


#	(2) run the shell script listed below to execute the PPC version of testsuite mpw tool and
#	compare the output with the standard "stl_test.exp" output.
#
#(# PPC (2)
	set proj "{stl}:test:regression:"
	set obj "{proj}.PPC.DBG:"
	set Regression_test.PPC.output "{obj}"MrCpp.exp		# output to separate file
	#set Regression_test.PPC.output "dev:stdout"	# output to {worksheet}
	directory "{proj}"
	target "{worksheet}"
	begin
		echo 'a string' > "{proj}"stdin # prepare input
		echo "###### START:    Regression_test.PPC"
		"{obj}"Regression_test.PPC < "{proj}"stdin > "{Regression_test.PPC.output}"	# run
		echo "###### FINISHED: Regression_test.PPC"
	end ·· "{worksheet}"
	if "{Regression_test.PPC.output}" != "dev:stdout"
		set exit 0
		comparefiles "{Regression_test.PPC.output}" "{proj}"stl_test.exp # compare output file
		set exit 1
	end ·· "{worksheet}"
#)#


#	*** how to try out the EH testsuite (PPC version):
#	===============================================================================================================
#	target compiler: apple's mpw MrCpp 5.0.0
#	
#	(3) run the shell script listed below to compile and link the PPC version of testsuite as the mpw
#	tool by selecting it and press enter.
#
#	Note: MrCpp and SCpp still can not pass all eh tests. You will get failed assertion when run the test.
#
#(# PPC (3)
begin
	set -e MrCpp `which MrCpp` # ver.5.0.0 or better is required
	save -a					# save all files (optional)
	directory "{stl}:test:eh:"		# setup the working directory
	target "{worksheet}"
	echo -n "¶n####### START BUILDING PPC VERSION OF STL EH TEST SUITE ####### "; date -s
	unset other_STL_Options
	unset other_MrCpp_Options
	unset fullbuild
#	set -e fullbuild "-e"			# uncomment this line to force full build
	unset debug_build
#	set -e debug_build '-d DEBUG'	# debug flavor can not pass the eh test yet.
	make -w {fullbuild} {debug_build} EH_test -f "{stl}:test:regression:MrCpp.mak" > MrCpp.MakeIt
	set -e exit 0
	execute MrCpp.MakeIt
	set -e exit 1
end ·· "{worksheet}"
#)#





#	*** how to try out the testsuite (68K version):
#	===============================================================================================================
#	target compiler: apple's mpw SCpp 8.9.0
#
#	(1) run the shell script listed below to compile and link the 68K version of testsuite as the mpw
#	tool by selecting it and press enter.
#
#(# 68K (1)
begin
	set SCpp `which SCpp` # ver.8.9.0 or better is required
	save -a					# save all files (optional)
	directory "{stl}:test:regression:"		# setup the working directory
	target "{worksheet}"
	echo -n "¶n####### START BUILDING 68K VERSION OF STL REGRESSION TEST SUITE ####### "; date -s
	unset other_STL_Options
	unset other_SCpp_Options
	unset fullbuild
#		set fullbuild "-e"	# uncomment this line to force full build
	unset debug_build
	set -e debug_build '-d DEBUG'	# uncomment this line to build non-debug version
	set -e other_SCpp_Options "-model far"
	make -w {fullbuild}  {debug_build} Regression_test -f "{stl}:test:regression:SCpp.mak" > SCpp.MakeIt
	set -e exit 0
	execute SCpp.MakeIt
	set -e exit 1
	unset other_SCpp_Options
end ·· "{worksheet}"
#)#


#	(2) run the shell script listed below to execute the 68K version of testsuite mpw tool and
#	compare the output with the standard "stl_test.exp" output.
#
#(# 68K (2)
	set -e proj "{stl}:test:regression:"
	set -e obj "{proj}.68K.DBG:"
	set Regression_test.68K.output "{obj}"SCpp.exp		# output to separate file
	#set Regression_test.68K.output "dev:stdout"	# output to {worksheet}
	if "{active}" =~ /(Å)¨1:Å/
		directory "{¨1}:"	# setup the working directory
	end
	target "{worksheet}"
	begin
		echo 'a string' > "{proj}"stdin # prepare input
		echo "###### START:    Regression_test.68K"
		"{obj}"Regression_test.68K < "{proj}"stdin > "{Regression_test.68K.output}"	# run
		echo "###### FINISHED: Regression_test.68K"
	end ·· "{worksheet}"
	if "{Regression_test.68K.output}" != "dev:stdout"
		set exit 0
		comparefiles "{Regression_test.68K.output}" "{proj}"stl_test.exp # compare output file
		set exit 1
	end ·· "{worksheet}"
#)#


#	*** how to try out the eh testsuite (68K version):
#	===============================================================================================================
#	target compiler: apple's mpw SCpp 8.9.0
#
#	(1) run the shell script listed below to compile and link the 68K version of testsuite as the mpw
#	tool by selecting it and press enter. 
#
#	Note: MrCpp and SCpp still can not pass all eh tests. You will get failed assertion when run the test.
#
#(# 68K (1)
begin
	set SCpp `which SCpp` # ver.8.9.0 or better is required
	save -a					# save all files (optional)
	directory "{stl}:test:eh:"		# setup the working directory
	target "{worksheet}"
	echo -n "¶n####### START BUILDING 68K VERSION OF STL EH TEST SUITE ####### "; date -s
	unset other_STL_Options
	unset other_SCpp_Options
	unset fullbuild
#		set fullbuild "-e"	# uncomment this line to force full build
	unset debug_build
	set -e debug_build '-d DEBUG'
	set -e other_SCpp_Options "-model far"
	make -w {fullbuild} {debug_build} EH_test -f "{stl}:test:regression:SCpp.mak" > SCpp.MakeIt
	set -e exit 0
	execute SCpp.MakeIt 
	set -e exit 1
end ·· "{worksheet}"
#)#


# - end of ReadMe.MPW