An engine replacement for Star Trek Voyager: Elite Force Holomatch (multiplayer) based on ioquake3 and ioEF.
Find a file
Thilo Schulz c0cca7a0a8 - Fix potential out-of-bounds read in files.c, fix by using new FS_IsExt
- Add capability to load demos with com_protocol suffix, partially applied patches from Simon McVittie
- Fix demo loading if protocol number has more digits than 2
- Minor refactoring, replace all occurances of suffix "dm_" with global macro DEMOEXT
2011-03-07 22:08:48 +00:00
code - Fix potential out-of-bounds read in files.c, fix by using new FS_IsExt 2011-03-07 22:08:48 +00:00
misc Bug 4566: Slackbuild update for 64bit. 2010-10-19 06:40:49 +00:00
ui remove svn:executable property 2005-08-28 17:54:51 +00:00
.svnignore Makefile.local gets ignored for great justice! 2006-08-08 23:57:20 +00:00
BUGS Lets actually make sure the people that don't read anything but this file get the right message. 2006-01-11 08:06:30 +00:00
ChangeLog http://www.angryflower.com/aposter.html 2011-02-09 05:51:33 +00:00
COPYING.txt remove svn:executable property 2005-08-28 17:54:51 +00:00
cross-make-mingw.sh the dishes, and Bugzilla bug 4780 are DONE. 2010-10-19 06:48:02 +00:00
id-readme.txt * Removed advertising clause from BSD license as per mailing list discussion 2006-01-18 18:46:32 +00:00
make-macosx-ub.sh * Adapted the universal build script to work with the newer Makefile 2009-10-23 18:58:24 +00:00
Makefile Thank you devhc 2011-02-07 04:34:39 +00:00
md4-readme.txt Fix typo 2010-06-21 20:20:04 +00:00
NOTTODO This is moved as well. 2008-06-30 03:38:19 +00:00
README Add cvar "protocol" so user can change protocol version on command line, for standalone games. Most of the patch by Simon McVittie with a few minor modifications by myself 2011-03-05 19:10:23 +00:00
TODO Remove TODO, point to the internet so I don't waste ci's. 2008-06-30 03:30:11 +00:00
voip-readme.txt Fix cvar name, thx kevlarman 2009-10-03 23:24:38 +00:00

                   ,---------------------------------------.
                   |   _                     _       ____  |
                   |  (_)___  __ _ _  _ __ _| |_____|__ /  |
                   |  | / _ \/ _` | || / _` | / / -_)|_ \  |
                   |  |_\___/\__, |\_,_\__,_|_\_\___|___/  |
                   |            |_|                        |
                   |                                       |
                   `---------- http://ioquake3.org --------'

The intent of this project is to provide a baseline Quake 3 which may be used
for further development and baseq3 fun. 
Some of the major features currently implemented are:

  * SDL backend
  * OpenAL sound API support (multiple speaker support and better sound
    quality)
  * Full x86_64 support on Linux
  * VoIP support, both in-game and external support through Mumble.
  * MinGW compilation support on Windows and cross compilation support on Linux
  * AVI video capture of demos
  * Much improved console autocompletion
  * Persistent console history
  * Colorized terminal output
  * Optional Ogg Vorbis support
  * Much improved QVM tools
  * Support for various esoteric operating systems
  * cl_guid support
  * HTTP/FTP download redirection (using cURL)
  * Multiuser support on Windows systems (user specific game data
    is stored in "%APPDATA%\Quake3")
  * PNG support
  * Many, many bug fixes

The map editor and associated compiling tools are not included. We suggest you
use a modern copy from http://www.qeradiant.com/.

The original id software readme that accompanied the Q3 source release has been
renamed to id-readme.txt so as to prevent confusion. Please refer to the
web-site for updated status.


--------------------------------------------- Compilation and installation -----

For *nix
  1. Change to the directory containing this readme.
  2. Run 'make'.

For Windows,
  1. Please refer to the excellent instructions here: 
     http://wiki.ioquake3.org/Building_ioquake3

For Mac OS X, building a Universal Binary
  1. Install MacOSX SDK packages from XCode.  For maximum compatibility,
     install MacOSX10.4u.sdk and MacOSX10.3.9.sdk, and MacOSX10.2.8.sdk.
  2. Change to the directory containing this README file.
  3. Run './make-macosx-ub.sh'
  4. Copy the resulting ioquake3.app in /build/release-darwin-ub to your
     /Applications/ioquake3 folder.

Installation, for *nix
  1. Set the COPYDIR variable in the shell to be where you installed Quake 3
     to. By default it will be /usr/local/games/quake3 if you haven't set it.
     This is the path as used by the original Linux Q3 installer and subsequent
     point releases.
  2. Run 'make copyfiles'.

It is also possible to cross compile for Windows under *nix using MinGW. A
script is available to build a cross compilation environment from
http://www.libsdl.org/extras/win32/cross/build-cross.sh. The gcc/binutils
version numbers that the script downloads may need to be altered.
Alternatively, your distribution may have mingw32 packages available. On
debian/Ubuntu, these are mingw32, mingw32-runtime and mingw32-binutils. Cross
compiling is simply a case of using './cross-make-mingw.sh' in place of 'make',
though you may find you need to change the value of the variables in this
script to match your environment.

The following variables may be set, either on the command line or in
Makefile.local:

  CFLAGS            - use this for custom CFLAGS
  V                 - set to show cc command line when building
  DEFAULT_BASEDIR   - extra path to search for baseq3 and such
  BUILD_SERVER      - build the 'ioq3ded' server binary
  BUILD_CLIENT      - build the 'ioquake3' client binary
  BUILD_CLIENT_SMP  - build the 'ioquake3-smp' client binary
  BUILD_GAME_SO     - build the game shared libraries
  BUILD_GAME_QVM    - build the game qvms
  BUILD_STANDALONE  - build binaries suited for stand-alone games
  USE_OPENAL        - use OpenAL where available
  USE_OPENAL_DLOPEN - link with OpenAL at runtime
  USE_CURL          - use libcurl for http/ftp download support
  USE_CURL_DLOPEN   - link with libcurl at runtime
  USE_CODEC_VORBIS  - enable Ogg Vorbis support
  USE_LOCAL_HEADERS - use headers local to ioq3 instead of system ones
  COPYDIR           - the target installation directory
  TEMPDIR           - specify user defined directory for temp files

The defaults for these variables differ depending on the target platform.


------------------------------------------------------------------ Console -----

New cvars
  cl_autoRecordDemo                 - record a new demo on each map change
  cl_aviFrameRate                   - the framerate to use when capturing video
  cl_aviMotionJpeg                  - use the mjpeg codec when capturing video
  cl_guidServerUniq                 - makes cl_guid unique for each server
  cl_cURLLib                        - filename of cURL library to load
  cl_consoleKeys                    - space delimited list of key names or
                                      characters that toggle the console
  cl_mouseAccelStyle                - Set to 1 for QuakeLive mouse acceleration
                                      behaviour, 0 for standard q3
  cl_mouseAccelOffset               - Tuning the acceleration curve, see below
  cl_gamename                       - Gamename sent to master server in
                                      getserversExt query

  s_useOpenAL                       - use the OpenAL sound backend if available
  s_alPrecache                      - cache OpenAL sounds before use
  s_alGain                          - the value of AL_GAIN for each source
  s_alSources                       - the total number of sources (memory) to
                                      allocate
  s_alDopplerFactor                 - the value passed to alDopplerFactor
  s_alDopplerSpeed                  - the value passed to alDopplerVelocity
  s_alMinDistance                   - the value of AL_REFERENCE_DISTANCE for
                                      each source
  s_alMaxDistance                   - the maximum distance before sounds start
                                      to become inaudible.
  s_alRolloff                       - the value of AL_ROLLOFF_FACTOR for each
                                      source
  s_alGraceDistance                 - after having passed MaxDistance, length
                                      until sounds are completely inaudible
  s_alDriver                        - which OpenAL library to use
  s_alDevice                        - which OpenAL device to use
  s_alAvailableDevices              - list of available OpenAL devices
  s_sdlBits                         - SDL bit resolution
  s_sdlSpeed                        - SDL sample rate
  s_sdlChannels                     - SDL number of channels
  s_sdlDevSamps                     - SDL DMA buffer size override
  s_sdlMixSamps                     - SDL mix buffer size override
  s_backend                         - read only, indicates the current sound
                                      backend
  s_muteWhenMinimized               - mute sound when minimized
  s_muteWhenUnfocused               - mute sound when window is unfocused

  com_ansiColor                     - enable use of ANSI escape codes in the tty
  com_altivec                       - enable use of altivec on PowerPC systems
  com_standalone (read only)        - If set to 1, quake3 is running in
                                      standalone mode
  com_basegame                      - Use a different base than baseq3. If no
                                      original Quake3 or TeamArena pak files
                                      are found, this will enable running in
                                      standalone mode
  com_homepath                      - Specify name that is to be appended to the
                                      home path
  com_maxfpsUnfocused               - Maximum frames per second when unfocused
  com_maxfpsMinimized               - Maximum frames per second when minimized
  com_busyWait                      - Will use a busy loop to wait for rendering
                                      next frame when set to non-zero value

  in_joystickNo                     - select which joystick to use
  in_keyboardDebug                  - print keyboard debug info

  sv_dlURL                          - the base of the HTTP or FTP site that
                                      holds custom pk3 files for your server
  sv_banFile                        - Name of the file that is used for storing
                                      the server bans
  sv_heartbeat                      - Heartbeat string sent to master server
  sv_flatline                       - Heartbeat string sent to master server
                                      when server is killed

  net_ip6                           - IPv6 address to bind to
  net_port6                         - port to bind to using the ipv6 address
  net_enabled                       - enable networking, bitmask. Add up
                                      number for option to enable it:
                                      enable ipv4 networking:    1
                                      enable ipv6 networking:    2
                                      prioritise ipv6 over ipv4: 4
                                      disable multicast support: 8
  net_mcast6addr                    - multicast address to use for scanning for
                                      ipv6 servers on the local network
  net_mcastiface                    - outgoing interface to use for scan

  protocol                          - Allow changing protocol version
                                      (startup only)

  r_allowResize                     - make window resizable (SDL only)
  r_ext_texture_filter_anisotropic  - anisotropic texture filtering
  r_zProj                           - distance of observer camera to projection
                                      plane in quake3 standard units
  r_greyscale                       - desaturate textures, useful for anaglyph,
                                      supports values in the range of 0 to 1
  r_stereoEnabled                   - enable stereo rendering for techniques
                                      like shutter glasses (untested)
  r_anaglyphMode                    - Enable rendering of anaglyph images
                                      red-cyan glasses:    1
                                      red-blue:            2
                                      red-green:           3
                                      To swap the colors for left and right eye
                                      just add 3 to the value for the wanted
                                      color combination. For red-blue and
                                      red-green you probably want to enable
                                      r_greyscale
  r_stereoSeparation                - Control eye separation. Resulting
                                      separation is r_zProj divided by this
                                      value in quake3 standard units.
                                      See also
                                      http://wiki.ioquake3.org/Stereo_Rendering
                                      for more information
  r_marksOnTriangleMeshes           - Support impact marks on md3 models, MOD
                                      developers should increase the mark
                                      triangle limits in cg_marks.c if they
                                      intend to use this.
  r_sdlDriver                       - read only, indicates the SDL driver
                                      backend being used
  r_noborder                        - Remove window decoration from window
                                      managers, like borders and titlebar.
  r_screenshotJpegQuality           - Controls quality of jpeg screenshots
                                      captured using screenshotJPEG
  r_aviMotionJpegQuality            - Controls quality of video capture when
                                      cl_aviMotionJpeg is enabled

New commands
  video [filename]        - start video capture (use with demo command)
  stopvideo               - stop video capture
  stopmusic               - stop background music
  minimize                - Minimize the game and show desktop

  print                   - print out the contents of a cvar
  unset                   - unset a user created cvar

  banaddr <range>         - ban an ip address range from joining a game on this
                            server, valid <range> is either playernum or CIDR
                            notation address range.
  exceptaddr <range>      - exempt an ip address range from a ban.
  bandel <range>          - delete ban (either range or ban number)
  exceptdel <range>       - delete exception (either range or exception number)
  listbans                - list all currently active bans and exceptions
  rehashbans              - reload the banlist from serverbans.dat
  flushbans               - delete all bans

  net_restart             - restart network subsystem to change latched settings
  game_restart <fs_game>  - Switch to another mod

  which <filename/path>   - print out the path on disk to a loaded item

------------------------------------------------------------ Miscellaneous -----

Using shared libraries instead of qvm
  To force Q3 to use shared libraries instead of qvms run it with the following
  parameters: +set sv_pure 0 +set vm_cgame 0 +set vm_game 0 +set vm_ui 0

Using Demo Data Files
  Copy demoq3/pak0.pk3 from the demo installer to your baseq3 directory. The
  qvm files in this pak0.pk3 will not work, so you have to use the native
  shared libraries or qvms from this project. To use the new qvms, they must be
  put into a pk3 file. A pk3 file is just a zip file, so any compression tool
  that can create such files will work. The shared libraries should already be
  in the correct place. Use the instructions above to use them.

  Please bear in mind that you will not be able to play online using the demo
  data, nor is it something that we like to spend much time maintaining or
  supporting.

Help! Ioquake3 won't give me an fps of X anymore when setting com_maxfps!
  Ioquake3 now uses the select() system call to wait for the rendering of the
  next frame when com_maxfps was hit. This will improve your CPU load
  considerably in these cases. However, not all systems may support a
  granularity for its timing functions that is required to perform this waiting
  correctly. For instance, ioquake3 tells select() to wait 2 milliseconds, but
  really it can only wait for a multiple of 5ms, i.e. 5, 10, 15, 20... ms.
  In this case you can always revert back to the old behaviour by setting the
  cvar com_busyWait to 1.

QuakeLive mouse acceleration (patch and this text written by TTimo from id)
  I've been using an experimental mouse acceleration code for a while, and
  decided to make it available to everyone. Don't be too worried if you don't
  understand the explanations below, this is mostly intended for advanced
  players:
  To enable it, set cl_mouseAccelStyle 1 (0 is the default/legacy behavior)

  New style is controlled with 3 cvars:

  sensitivity
  cl_mouseAccel
  cl_mouseAccelOffset

  The old code (cl_mouseAccelStyle 0) can be difficult to calibrate because if
  you have a base sensitivity setup, as soon as you set a non zero acceleration
  your base sensitivity at low speeds will change as well. The other problem
  with style 0 is that you are stuck on a square (power of two) acceleration
  curve.

  The new code tries to solve both problems:

  Once you setup your sensitivity to feel comfortable and accurate enough for
  low mouse deltas with no acceleration (cl_mouseAccel 0), you can start
  increasing cl_mouseAccel and tweaking cl_mouseAccelOffset to get the
  amplification you want for high deltas with little effect on low mouse deltas.

  cl_mouseAccel is a power value. Should be >= 1, 2 will be the same power curve
  as style 0. The higher the value, the faster the amplification grows with the
  mouse delta.

  cl_mouseAccelOffset sets how much base mouse delta will be doubled by
  acceleration. The closer to zero you bring it, the more acceleration will
  happen at low speeds. This is also very useful if you are changing to a new
  mouse with higher dpi, if you go from 500 to 1000 dpi, you can divide your
  cl_mouseAccelOffset by two to keep the same overall 'feel' (you will likely
  gain in precision when you do that, but that is not related to mouse
  acceleration).

  Mouse acceleration is tricky to configure, and when you do you'll have to
  re-learn your aiming. But you will find that it's very much forth it in the
  long run.

  If you try the new acceleration code and start using it, I'd be very
  interested by your feedback.

64bit mods
  If you wish to compile external mods as shared libraries on a 64bit platform,
  and the mod source is derived from the id Q3 SDK, you will need to modify the
  interface code a little. Open the files ending in _syscalls.c and change
  every instance of int to intptr_t in the declaration of the syscall function
  pointer and the dllEntry function. Also find the vmMain function for each
  module (usually in cg_main.c g_main.c etc.) and similarly replace the return
  value in the prototype with intptr_t (arg0, arg1, ...stay int).

  Add the following code snippet to q_shared.h:

    #ifdef Q3_VM
    typedef int intptr_t;
    #else
    #include <stdint.h>
    #endif

  Note if you simply wish to run mods on a 64bit platform you do not need to
  recompile anything since by default Q3 uses a virtual machine system.

Creating mods compatible with Q3 1.32b
  If you're using this package to create mods for the last official release of
  Q3, it is necessary to pass the commandline option '-vq3' to your invocation
  of q3asm. This is because by default q3asm outputs an updated qvm format that
  is necessary to fix a bug involving the optimizing pass of the x86 vm JIT
  compiler.

Creating standalone games
  Have you finished the daunting task of removing all dependencies on the Q3
  game data? You probably now want to give your users the opportunity to play
  the game without owning a copy of Q3, which consequently means removing cd-key
  and authentication server checks. In addition to being a straightforward Q3
  client, ioquake3 also purports to be a reliable and stable code base on which
  to base your game project.

  However, before you start compiling your own version of ioquake3, you have to
  ask yourself: Have we changed or will we need to change anything of importance
  in the engine?

  If your answer to this question is "no", it probably makes no sense to build
  your own binaries. Instead, you can just use the pre-built binaries on the
  website. Just make sure the game is called with:

    +set com_basegame <yournewbase>
    
  in any links/scripts you install for your users to start the game. The
  binary must not detect any original quake3 game pak files. If this
  condition is met, the game will set com_standalone to 1 and is then running
  in stand alone mode.
  
  If you want the engine to use a different directory in your homepath than
  e.g. "Quake3" on Windows or ".q3a" on Linux, then set a new name at startup
  by adding
  
    +set com_homepath <homedirname>
  
  to the command line. Then you can control which kind of messages to send to
  the master server:
  
    +set sv_heartbeat <heartbeat> +set sv_flatline <flatline>
    +set cl_gamename <gamename>
  
  The <heartbeat> and <flatline> message can be specific to your game. The
  flatline message is sent to signal the master server that the game server is
  quitting. Vanilla quake3 uses "QuakeArena-1" both for the heartbeat and
  flatline messages.
  The cl_gamename message is for dpmaster to specify which game the client
  wants a server list for. It is only used in the new ipv6 based getServersExt
  query.
  
  Example line:
  
    +set com_basegame basefoo +set com_homepath .foo
    +set sv_heartbeat fooalive +set sv_flatline foodead
    +set cl_gamename foo


  If you really changed parts that would make vanilla ioquake3 incompatible with
  your mod, we have included another way to conveniently build a stand-alone
  binary. Just run make with the option BUILD_STANDALONE=1. Don't forget to edit
  the PRODUCT_NAME and subsequent #defines in qcommon/q_shared.h with
  information appropriate for your project.

  While a lot of work has been put into ioquake3 that you can benefit from free
  of charge, it does not mean that you have no obligations to fulfil. Please be
  aware that as soon as you start distributing your game with an engine based on
  our sources we expect you to fully comply with the requirements as stated in
  the GPL. That includes making sources and modifications you made to the
  ioquake3 engine as well as the game-code used to compile the .qvm files for
  the game logic freely available to everyone. Furthermore, note that the "QIIIA
  Game Source License" prohibits distribution of mods that are intended to
  operate on a version of Q3 not sanctioned by id software:

    "with this Agreement, ID grants to you the non-exclusive and limited right
    to distribute copies of the Software ... for operation only with the full
    version of the software game QUAKE III ARENA"

  This means that if you're creating a standalone game, you cannot use said
  license on any portion of the product. As the only other license this code has
  been released under is the GPL, this is the only option.

  This does NOT mean that you cannot market this game commercially. The GPL does
  not prohibit commercial exploitation and all assets (e.g. textures, sounds,
  maps) created by yourself are your property and can be sold like every other
  game you find in stores.

cl_guid Support
  cl_guid is a cvar which is part of the client's USERINFO string.  Its value
  is a 32 character string made up of [a-f] and [0-9] characters.  This
  value is pseudo-unique for every player.  Id's Quake 3 Arena client also
  sets cl_guid, but only if Punkbuster is enabled on the client.

  If cl_guidServerUniq is non-zero (the default), then this value is also
  pseudo-unique for each server a client connects to (based on IP:PORT of
  the server).

  The purpose of cl_guid is to add an identifier for each player on
  a server.  This value can be reset by the client at any time so it's not
  useful for blocking access.  However, it can have at least two uses in
  your mod's game code:
    1) improve logging to allow statistical tools to index players by more
       than just name
    2) granting some weak admin rights to players without requiring passwords

Using HTTP/FTP Download Support (Server)
  You can enable redirected downloads on your server even if it's not
  an ioquake3 server.  You simply need to use the 'sets' command to put
  the sv_dlURL cvar into your SERVERINFO string and ensure sv_allowDownloads
  is set to 1

  sv_dlURL is the base of the URL that contains your custom .pk3 files
  the client will append both fs_game and the filename to the end of
  this value.  For example, if you have sv_dlURL set to
  "http://ioquake3.org", fs_game is "baseq3", and the client is
  missing "test.pk3", it will attempt to download from the URL
  "http://ioquake3.org/baseq3/test.pk3"

  sv_allowDownload's value is now a bitmask made up of the following
  flags:
    1 - ENABLE
    4 - do not use UDP downloads
    8 - do not ask the client to disconnect when using HTTP/FTP

  Server operators who are concerned about potential "leeching" from their
  HTTP servers from other ioquake3 servers can make use of the HTTP_REFERER
  that ioquake3 sets which is "ioQ3://{SERVER_IP}:{SERVER_PORT}".  For,
  example, Apache's mod_rewrite can restrict access based on HTTP_REFERER.

Using HTTP/FTP Download Support (Client)
  Simply setting cl_allowDownload to 1 will enable HTTP/FTP downloads
  assuming ioquake3 was compiled with USE_CURL=1 (the default).
  like sv_allowDownload, cl_allowDownload also uses a bitmask value
  supporting the following flags:
    1 - ENABLE
    2 - do not use HTTP/FTP downloads
    4 - do not use UDP downloads

  When ioquake3 is built with USE_CURL_DLOPEN=1 (default on some platforms),
  it will use the value of the cvar cl_cURLLib as the filename of the cURL
  library to dynamically load.

Multiuser Support on Windows systems
  On Windows, all user specific files such as autogenerated configuration,
  demos, videos, screenshots, and autodownloaded pk3s are now saved in a
  directory specific to the user who is running ioquake3.

  On NT-based such as Windows XP, this is usually a directory named:
    "C:\Documents and Settings\%USERNAME%\Application Data\Quake3\"

  Windows 95, Windows 98, and Windows ME will use a directory like:
    "C:\Windows\Application Data\Quake3"
  in single-user mode, or:
    "C:\Windows\Profiles\%USERNAME%\Application Data\Quake3"
  if multiple logins have been enabled.

  In order to access this directory more easily, the installer may create a
  Shortcut which has its target set to:
    "%APPDATA%\Quake3\"
  This Shortcut would work for all users on the system regardless of the
  locale settings.  Unfortunately, this environment variable is only
  present on Windows NT based systems.

  You can revert to the old single-user behaviour by setting the fs_homepath
  cvar to the directory where ioquake3 is installed.  For example:
    ioquake3.exe +set fs_homepath "c:\ioquake3"
  Note that this cvar MUST be set as a command line parameter.

SDL Keyboard Differences
  ioquake3 clients have different keyboard behaviour compared to the original
  Quake3 clients.

    * "Caps Lock" and "Num Lock" can not be used as normal binds since they
      do not send a KEYUP event until the key is pressed again.

    * SDL > 1.2.9 does not support disabling dead key recognition. In order to
      send dead key characters (e.g. ~, ', `, and ^), you must key a Space (or
      sometimes the same character again) after the character to send it on
      many international keyboard layouts.

    * The SDL client supports many more keys than the original Quake3 client.
      For example the keys: "Windows", "SysReq", "ScrollLock", and "Break".
      For non-US keyboards, all of the so called "World" keys are now supported
      as well as F13, F14, F15, and the country-specific mode/meta keys.

  On many international layouts the default console toggle keys are also dead
  keys, meaning that dropping the console potentially results in
  unintentionally initiating the keying of a dead key. Futhermore SDL 1.2's
  dead key support is broken by design and Q3 doesn't support non-ASCII text
  entry, so the chances are you won't get the correct character anyway.

  If you use such a keyboard layout, you can set the cvar cl_consoleKeys. This
  is a space delimited list of key names that will toggle the console. The key
  names are the usual Q3 names e.g. "~", "`", "c", "BACKSPACE", "PAUSE",
  "WINDOWS" etc. It's also possible to use ASCII characters, by hexadecimal
  number. Some example values for cl_consoleKeys:

    "~ ` 0x7e 0x60"           Toggle on ~ or ` (the default)
    "WINDOWS"                 Toggle on the Windows key
    "c"                       Toggle on the c key
    "0x43"                    Toggle on the C character (Shift-c)
    "PAUSE F1 PGUP"           Toggle on the Pause, F1 or Page Up keys

  Note that when you elect a set of console keys or characters, they cannot
  then be used for binding, nor will they generate characters when entering
  text. Also, in addition to the nominated console keys, Shift-ESC is hard
  coded to always toggle the console.

PNG support
  ioquake3 supports the use of PNG (Portable Network Graphic) images as
  textures. It should be noted that the use of such images in a map will
  result in missing placeholder textures where the map is used with the id
  Quake 3 client or earlier versions of ioquake3.

  Recent versions of GtkRadiant and q3map2 support PNG images without
  modification. However GtkRadiant is not aware that PNG textures are supported
  by ioquake3. To change this behaviour open the file 'q3.game' in the 'games'
  directory of the GtkRadiant base directory with an editor and change the
  line:

    texturetypes="tga jpg"

  to

    texturetypes="tga jpg png"

  Restart GtkRadiant and PNG textures are now available.

Building with MinGW for pre Windows XP
  IPv6 support requires a header named "wspiapi.h" to abstract away from
  differences in earlier versions of Windows' IPv6 stack. There is no MinGW
  equivalent of this header and the Microsoft version is obviously not
  redistributable, so in its absence we're forced to require Windows XP.
  However if this header is acquired separately and placed in the qcommon/
  directory, this restriction is lifted.


------------------------------------------------------------- Contributing -----

Please send all patches to bugzilla (https://bugzilla.icculus.org), or join the
mailing list (quake3-subscribe@icculus.org) and submit your patch there.  The
best case scenario is that you submit your patch to bugzilla, and then post the
URL to the mailing list.

The focus for ioq3 is to develop a stable base suitable for further development
and provide players with the same Quake 3 experience they've had for years. As
such ioq3 does not have any significant graphical enhancements and none are
planned at this time. However, improved graphics and sound patches will be
accepted as long as they are entirely optional, do not require new media and
are off by default.


--------------------------------------------- Building Official Installers -----

We need help getting automated installers on all the platforms that ioquake3
supports. We don't neccesarily care about all the installers being identical,
but we have some general guidelines:

  * Please include the id patch pk3s in your installer, which are available
    from http://ioquake3.org/patch-data/ subject to agreement to the id
    EULA. Your installer shall also ask the user to agree to this EULA (which
    is in the /web/include directory for your convenience) and subsequently
    refuse to continue the installation of the patch pk3s and pak0.pk3 if they
    do not.

  * Please don't require pak0.pk3, since not everyone using the engine
    plans on playing Quake 3 Arena on it. It's fine to (optionally) assist the
    user in copying the file or tell them how.

  * It is fine to just install the binaries without requiring id EULA agreement,
    providing pak0.pk3 and the patch pk3s are not refered to or included in the
    installer.

  * Please include at least an SDL so/dylib/dll on every platform.

  * Please include an OpenAL so/dylib/dll, since every platform should be using
    it by now.

  * Please contact the mailing list when you've made your installer.

  * Please be prepared to alter your installer on the whim of the maintainers.

  * Your installer will be mirrored to an "official" directory, thus making it
    a done deal.

------------------------------------------------------------------ Credits -----

Maintainers
  Ludwig Nussel <ludwig.nussel@suse.de>
  Thilo Schulz <arny@ats.s.bawue.de>
  Tim Angus <tim@ngus.net>
  Tony J. White <tjw@tjw.org>
  Zachary J. Slater <zachary@ioquake.org>

Significant contributions from
  Ryan C. Gordon <icculus@icculus.org>
  Andreas Kohn <andreas@syndrom23.de>
  Joerg Dietrich <Dietrich_Joerg@t-online.de>
  Stuart Dalton <badcdev@gmail.com>
  Vincent S. Cojot <vincent at cojot dot name>
  optical <alex@rigbo.se>
  Aaron Gyes <floam@aaron.gy>