/* =========================================================================== Copyright (C) 1999-2005 Id Software, Inc. This file is part of Quake III Arena source code. Quake III Arena source code is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. Quake III Arena source code is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with Quake III Arena source code; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA =========================================================================== */ // tr_surf.c #include "tr_local.h" #if idppc_altivec && !defined(MACOS_X) #include #endif /* THIS ENTIRE FILE IS BACK END backEnd.currentEntity will be valid. Tess_Begin has already been called for the surface's shader. The modelview matrix will be set. It is safe to actually issue drawing commands here if you don't want to use the shader system. */ //============================================================================ /* ============== RB_CheckOverflow ============== */ void RB_CheckOverflow( int verts, int indexes ) { if (tess.numVertexes + verts < SHADER_MAX_VERTEXES && tess.numIndexes + indexes < SHADER_MAX_INDEXES) { return; } RB_EndSurface(); if ( verts >= SHADER_MAX_VERTEXES ) { ri.Error(ERR_DROP, "RB_CheckOverflow: verts > MAX (%d > %d)", verts, SHADER_MAX_VERTEXES ); } if ( indexes >= SHADER_MAX_INDEXES ) { ri.Error(ERR_DROP, "RB_CheckOverflow: indices > MAX (%d > %d)", indexes, SHADER_MAX_INDEXES ); } RB_BeginSurface(tess.shader, tess.fogNum, tess.cubemapIndex ); } void RB_CheckVao(vao_t *vao) { if (vao != glState.currentVao || tess.multiDrawPrimitives >= MAX_MULTIDRAW_PRIMITIVES) { RB_EndSurface(); RB_BeginSurface(tess.shader, tess.fogNum, tess.cubemapIndex); R_BindVao(vao); } if (vao != tess.vao) tess.useInternalVao = qfalse; } /* ============== RB_AddQuadStampExt ============== */ void RB_AddQuadStampExt( vec3_t origin, vec3_t left, vec3_t up, float color[4], float s1, float t1, float s2, float t2 ) { vec3_t normal; uint32_t pNormal; int ndx; RB_CheckVao(tess.vao); RB_CHECKOVERFLOW( 4, 6 ); ndx = tess.numVertexes; // triangle indexes for a simple quad tess.indexes[ tess.numIndexes ] = ndx; tess.indexes[ tess.numIndexes + 1 ] = ndx + 1; tess.indexes[ tess.numIndexes + 2 ] = ndx + 3; tess.indexes[ tess.numIndexes + 3 ] = ndx + 3; tess.indexes[ tess.numIndexes + 4 ] = ndx + 1; tess.indexes[ tess.numIndexes + 5 ] = ndx + 2; tess.xyz[ndx][0] = origin[0] + left[0] + up[0]; tess.xyz[ndx][1] = origin[1] + left[1] + up[1]; tess.xyz[ndx][2] = origin[2] + left[2] + up[2]; tess.xyz[ndx+1][0] = origin[0] - left[0] + up[0]; tess.xyz[ndx+1][1] = origin[1] - left[1] + up[1]; tess.xyz[ndx+1][2] = origin[2] - left[2] + up[2]; tess.xyz[ndx+2][0] = origin[0] - left[0] - up[0]; tess.xyz[ndx+2][1] = origin[1] - left[1] - up[1]; tess.xyz[ndx+2][2] = origin[2] - left[2] - up[2]; tess.xyz[ndx+3][0] = origin[0] + left[0] - up[0]; tess.xyz[ndx+3][1] = origin[1] + left[1] - up[1]; tess.xyz[ndx+3][2] = origin[2] + left[2] - up[2]; // constant normal all the way around VectorSubtract( vec3_origin, backEnd.viewParms.or.axis[0], normal ); R_VaoPackNormal((byte *)&pNormal, normal); tess.normal[ndx] = tess.normal[ndx+1] = tess.normal[ndx+2] = tess.normal[ndx+3] = pNormal; // standard square texture coordinates VectorSet2(tess.texCoords[ndx ][0], s1, t1); VectorSet2(tess.texCoords[ndx ][1], s1, t1); VectorSet2(tess.texCoords[ndx+1][0], s2, t1); VectorSet2(tess.texCoords[ndx+1][1], s2, t1); VectorSet2(tess.texCoords[ndx+2][0], s2, t2); VectorSet2(tess.texCoords[ndx+2][1], s2, t2); VectorSet2(tess.texCoords[ndx+3][0], s1, t2); VectorSet2(tess.texCoords[ndx+3][1], s1, t2); // constant color all the way around // should this be identity and let the shader specify from entity? VectorCopy4(color, tess.vertexColors[ndx]); VectorCopy4(color, tess.vertexColors[ndx+1]); VectorCopy4(color, tess.vertexColors[ndx+2]); VectorCopy4(color, tess.vertexColors[ndx+3]); tess.numVertexes += 4; tess.numIndexes += 6; } /* ============== RB_AddQuadStamp ============== */ void RB_AddQuadStamp( vec3_t origin, vec3_t left, vec3_t up, float color[4] ) { RB_AddQuadStampExt( origin, left, up, color, 0, 0, 1, 1 ); } /* ============== RB_InstantQuad based on Tess_InstantQuad from xreal ============== */ void RB_InstantQuad2(vec4_t quadVerts[4], vec2_t texCoords[4]) { GLimp_LogComment("--- RB_InstantQuad2 ---\n"); tess.numVertexes = 0; tess.numIndexes = 0; tess.firstIndex = 0; VectorCopy4(quadVerts[0], tess.xyz[tess.numVertexes]); VectorCopy2(texCoords[0], tess.texCoords[tess.numVertexes][0]); tess.numVertexes++; VectorCopy4(quadVerts[1], tess.xyz[tess.numVertexes]); VectorCopy2(texCoords[1], tess.texCoords[tess.numVertexes][0]); tess.numVertexes++; VectorCopy4(quadVerts[2], tess.xyz[tess.numVertexes]); VectorCopy2(texCoords[2], tess.texCoords[tess.numVertexes][0]); tess.numVertexes++; VectorCopy4(quadVerts[3], tess.xyz[tess.numVertexes]); VectorCopy2(texCoords[3], tess.texCoords[tess.numVertexes][0]); tess.numVertexes++; tess.indexes[tess.numIndexes++] = 0; tess.indexes[tess.numIndexes++] = 1; tess.indexes[tess.numIndexes++] = 2; tess.indexes[tess.numIndexes++] = 0; tess.indexes[tess.numIndexes++] = 2; tess.indexes[tess.numIndexes++] = 3; tess.minIndex = 0; tess.maxIndex = 3; RB_UpdateTessVao(ATTR_POSITION | ATTR_TEXCOORD); R_DrawElementsVao(tess.numIndexes, tess.firstIndex, tess.minIndex, tess.maxIndex); tess.numIndexes = 0; tess.numVertexes = 0; tess.firstIndex = 0; tess.minIndex = 0; tess.maxIndex = 0; } void RB_InstantQuad(vec4_t quadVerts[4]) { vec2_t texCoords[4]; VectorSet2(texCoords[0], 0.0f, 0.0f); VectorSet2(texCoords[1], 1.0f, 0.0f); VectorSet2(texCoords[2], 1.0f, 1.0f); VectorSet2(texCoords[3], 0.0f, 1.0f); GLSL_BindProgram(&tr.textureColorShader); GLSL_SetUniformMat4(&tr.textureColorShader, UNIFORM_MODELVIEWPROJECTIONMATRIX, glState.modelviewProjection); GLSL_SetUniformVec4(&tr.textureColorShader, UNIFORM_COLOR, colorWhite); RB_InstantQuad2(quadVerts, texCoords); } /* ============== RB_SurfaceSprite ============== */ static void RB_SurfaceSprite( void ) { vec3_t left, up; float radius; float rotation; float colors[4]; trRefEntity_t *ent = backEnd.currentEntity; // calculate the xyz locations for the four corners #ifdef ELITEFORCE radius = backEnd.currentEntity->e.data.sprite.radius; rotation = backEnd.currentEntity->e.data.sprite.rotation; #else radius = backEnd.currentEntity->e.radius; rotation = backEnd.currentEntity->e.rotation; #endif if ( rotation == 0 ) { VectorScale( backEnd.viewParms.or.axis[1], radius, left ); VectorScale( backEnd.viewParms.or.axis[2], radius, up ); } else { float s, c; float ang; ang = M_PI * rotation / 180; s = sin( ang ); c = cos( ang ); VectorScale( backEnd.viewParms.or.axis[1], c * radius, left ); VectorMA( left, -s * radius, backEnd.viewParms.or.axis[2], left ); VectorScale( backEnd.viewParms.or.axis[2], c * radius, up ); VectorMA( up, s * radius, backEnd.viewParms.or.axis[1], up ); } if ( backEnd.viewParms.isMirror ) { VectorSubtract( vec3_origin, left, left ); } VectorScale4(ent->e.shaderRGBA, 1.0f / 255.0f, colors); RB_AddQuadStamp( ent->e.origin, left, up, colors ); } /* ============= RB_SurfacePolychain ============= */ static void RB_SurfacePolychain( srfPoly_t *p ) { int i; int numv; RB_CheckVao(tess.vao); RB_CHECKOVERFLOW( p->numVerts, 3*(p->numVerts - 2) ); // fan triangles into the tess array numv = tess.numVertexes; for ( i = 0; i < p->numVerts; i++ ) { VectorCopy( p->verts[i].xyz, tess.xyz[numv] ); tess.texCoords[numv][0][0] = p->verts[i].st[0]; tess.texCoords[numv][0][1] = p->verts[i].st[1]; tess.vertexColors[numv][0] = p->verts[ i ].modulate[0] / 255.0f; tess.vertexColors[numv][1] = p->verts[ i ].modulate[1] / 255.0f; tess.vertexColors[numv][2] = p->verts[ i ].modulate[2] / 255.0f; tess.vertexColors[numv][3] = p->verts[ i ].modulate[3] / 255.0f; numv++; } // generate fan indexes into the tess array for ( i = 0; i < p->numVerts-2; i++ ) { tess.indexes[tess.numIndexes + 0] = tess.numVertexes; tess.indexes[tess.numIndexes + 1] = tess.numVertexes + i + 1; tess.indexes[tess.numIndexes + 2] = tess.numVertexes + i + 2; tess.numIndexes += 3; } tess.numVertexes = numv; } static void RB_SurfaceVertsAndIndexes( int numVerts, srfVert_t *verts, int numIndexes, glIndex_t *indexes, int dlightBits, int pshadowBits) { int i; glIndex_t *inIndex; srfVert_t *dv; float *xyz, *texCoords, *lightCoords; uint32_t *lightdir; uint32_t *normal; #ifdef USE_VERT_TANGENT_SPACE uint32_t *tangent; #endif glIndex_t *outIndex; float *color; RB_CheckVao(tess.vao); RB_CHECKOVERFLOW( numVerts, numIndexes ); inIndex = indexes; outIndex = &tess.indexes[ tess.numIndexes ]; for ( i = 0 ; i < numIndexes ; i++ ) { *outIndex++ = tess.numVertexes + *inIndex++; } tess.numIndexes += numIndexes; if ( tess.shader->vertexAttribs & ATTR_POSITION ) { dv = verts; xyz = tess.xyz[ tess.numVertexes ]; for ( i = 0 ; i < numVerts ; i++, dv++, xyz+=4 ) VectorCopy(dv->xyz, xyz); } if ( tess.shader->vertexAttribs & ATTR_NORMAL ) { dv = verts; normal = &tess.normal[ tess.numVertexes ]; for ( i = 0 ; i < numVerts ; i++, dv++, normal++ ) R_VaoPackNormal((byte *)normal, dv->normal); } #ifdef USE_VERT_TANGENT_SPACE if ( tess.shader->vertexAttribs & ATTR_TANGENT ) { dv = verts; tangent = &tess.tangent[ tess.numVertexes ]; for ( i = 0 ; i < numVerts ; i++, dv++, tangent++ ) R_VaoPackTangent((byte *)tangent, dv->tangent); } #endif if ( tess.shader->vertexAttribs & ATTR_TEXCOORD ) { dv = verts; texCoords = tess.texCoords[ tess.numVertexes ][0]; for ( i = 0 ; i < numVerts ; i++, dv++, texCoords+=4 ) VectorCopy2(dv->st, texCoords); } if ( tess.shader->vertexAttribs & ATTR_LIGHTCOORD ) { dv = verts; lightCoords = tess.texCoords[ tess.numVertexes ][1]; for ( i = 0 ; i < numVerts ; i++, dv++, lightCoords+=4 ) VectorCopy2(dv->lightmap, lightCoords); } if ( tess.shader->vertexAttribs & ATTR_COLOR ) { dv = verts; color = tess.vertexColors[ tess.numVertexes ]; for ( i = 0 ; i < numVerts ; i++, dv++, color+=4 ) VectorCopy4(dv->vertexColors, color); } if ( tess.shader->vertexAttribs & ATTR_LIGHTDIRECTION ) { dv = verts; lightdir = &tess.lightdir[ tess.numVertexes ]; for ( i = 0 ; i < numVerts ; i++, dv++, lightdir++ ) R_VaoPackNormal((byte *)lightdir, dv->lightdir); } #if 0 // nothing even uses vertex dlightbits for ( i = 0 ; i < numVerts ; i++ ) { tess.vertexDlightBits[ tess.numVertexes + i ] = dlightBits; } #endif tess.dlightBits |= dlightBits; tess.pshadowBits |= pshadowBits; tess.numVertexes += numVerts; } static qboolean RB_SurfaceVao(vao_t *vao, int numVerts, int numIndexes, int firstIndex, int minIndex, int maxIndex, int dlightBits, int pshadowBits, qboolean shaderCheck) { int i, mergeForward, mergeBack; GLvoid *firstIndexOffset, *lastIndexOffset; if (!vao) { return qfalse; } if (shaderCheck && !(!ShaderRequiresCPUDeforms(tess.shader) && !tess.shader->isSky && !tess.shader->isPortal)) { return qfalse; } RB_CheckVao(vao); tess.dlightBits |= dlightBits; tess.pshadowBits |= pshadowBits; // merge this into any existing multidraw primitives mergeForward = -1; mergeBack = -1; firstIndexOffset = BUFFER_OFFSET(firstIndex * sizeof(glIndex_t)); lastIndexOffset = BUFFER_OFFSET((firstIndex + numIndexes) * sizeof(glIndex_t)); if (tess.multiDrawPrimitives && r_mergeMultidraws->integer) { i = 0; if (r_mergeMultidraws->integer == 1) { // lazy merge, only check the last primitive i = tess.multiDrawPrimitives - 1; } for (; i < tess.multiDrawPrimitives; i++) { if (firstIndexOffset == tess.multiDrawFirstIndex[i] + tess.multiDrawNumIndexes[i]) { mergeBack = i; if (mergeForward != -1) break; } if (lastIndexOffset == tess.multiDrawFirstIndex[i]) { mergeForward = i; if (mergeBack != -1) break; } } } if (mergeBack != -1 && mergeForward == -1) { tess.multiDrawNumIndexes[mergeBack] += numIndexes; tess.multiDrawMinIndex[mergeBack] = MIN(tess.multiDrawMinIndex[mergeBack], minIndex); tess.multiDrawMaxIndex[mergeBack] = MAX(tess.multiDrawMaxIndex[mergeBack], maxIndex); backEnd.pc.c_multidrawsMerged++; } else if (mergeBack == -1 && mergeForward != -1) { tess.multiDrawNumIndexes[mergeForward] += numIndexes; tess.multiDrawFirstIndex[mergeForward] = firstIndexOffset; tess.multiDrawMinIndex[mergeForward] = MIN(tess.multiDrawMinIndex[mergeForward], minIndex); tess.multiDrawMaxIndex[mergeForward] = MAX(tess.multiDrawMaxIndex[mergeForward], maxIndex); backEnd.pc.c_multidrawsMerged++; } else if (mergeBack != -1 && mergeForward != -1) { tess.multiDrawNumIndexes[mergeBack] += numIndexes + tess.multiDrawNumIndexes[mergeForward]; tess.multiDrawMinIndex[mergeBack] = MIN(tess.multiDrawMinIndex[mergeBack], MIN(tess.multiDrawMinIndex[mergeForward], minIndex)); tess.multiDrawMaxIndex[mergeBack] = MAX(tess.multiDrawMaxIndex[mergeBack], MAX(tess.multiDrawMaxIndex[mergeForward], maxIndex)); tess.multiDrawPrimitives--; if (mergeForward != tess.multiDrawPrimitives) { tess.multiDrawNumIndexes[mergeForward] = tess.multiDrawNumIndexes[tess.multiDrawPrimitives]; tess.multiDrawFirstIndex[mergeForward] = tess.multiDrawFirstIndex[tess.multiDrawPrimitives]; tess.multiDrawMinIndex[mergeForward] = tess.multiDrawMinIndex[tess.multiDrawPrimitives]; tess.multiDrawMaxIndex[mergeForward] = tess.multiDrawMaxIndex[tess.multiDrawPrimitives]; } backEnd.pc.c_multidrawsMerged += 2; } else //if (mergeBack == -1 && mergeForward == -1) { tess.multiDrawNumIndexes[tess.multiDrawPrimitives] = numIndexes; tess.multiDrawFirstIndex[tess.multiDrawPrimitives] = firstIndexOffset; tess.multiDrawMinIndex[tess.multiDrawPrimitives] = minIndex; tess.multiDrawMaxIndex[tess.multiDrawPrimitives] = maxIndex; tess.multiDrawPrimitives++; } backEnd.pc.c_multidraws++; tess.numIndexes += numIndexes; tess.numVertexes += numVerts; return qtrue; } /* ============= RB_SurfaceTriangles ============= */ static void RB_SurfaceTriangles( srfBspSurface_t *srf ) { if( RB_SurfaceVao (srf->vao, srf->numVerts, srf->numIndexes, srf->firstIndex, srf->minIndex, srf->maxIndex, srf->dlightBits, srf->pshadowBits, qtrue ) ) { return; } RB_SurfaceVertsAndIndexes(srf->numVerts, srf->verts, srf->numIndexes, srf->indexes, srf->dlightBits, srf->pshadowBits); } #ifdef ELITEFORCE /* ============== RB_SurfaceOrientedSprite ============== */ static void RB_SurfaceOrientedSprite( void ) { vec3_t left, up; float radius; float rotation; float colors[4]; trRefEntity_t *ent = backEnd.currentEntity; // calculate the xyz locations for the four corners radius = backEnd.currentEntity->e.data.sprite.radius; rotation = backEnd.currentEntity->e.data.sprite.rotation; if (rotation == 0) { VectorScale( backEnd.currentEntity->e.axis[1], radius, left ); VectorScale( backEnd.currentEntity->e.axis[2], radius, up ); } else { float s, c; float ang; ang = M_PI * rotation / 180; s = sin( ang ); c = cos( ang ); VectorScale( backEnd.currentEntity->e.axis[1], c * radius, left ); VectorMA( left, -s * radius, backEnd.currentEntity->e.axis[2], left ); VectorScale( backEnd.currentEntity->e.axis[2], c * radius, up ); VectorMA( up, s * radius, backEnd.currentEntity->e.axis[1], up ); } if ( backEnd.viewParms.isMirror ) VectorSubtract( vec3_origin, left, left ); VectorScale4(ent->e.shaderRGBA, 1.0f / 255.0f, colors); RB_AddQuadStamp( ent->e.origin, left, up, colors ); } void RB_Line(vec3_t start, vec3_t end, vec3_t linedirection, vec3_t left, vec3_t *corners, float starttex, float endtex, refEntity_t *e) { int ndx, numind; vec4_t *vertcols; RB_CHECKOVERFLOW( 4, 6 ); // Set up the triangles .. ndx = tess.numVertexes; numind = tess.numIndexes; tess.indexes[ numind ] = ndx; tess.indexes[ numind + 1 ] = ndx + 1; tess.indexes[ numind + 2 ] = ndx + 3; tess.indexes[ numind + 3 ] = ndx + 3; tess.indexes[ numind + 4 ] = ndx + 1; tess.indexes[ numind + 5 ] = ndx + 2; // now create the corner vertices if(corners) { // we have the corner points for the start already given. VectorCopy(corners[0], tess.xyz[ndx]); VectorCopy(corners[1], tess.xyz[ndx+1]); } else { // start left corner VectorAdd(start, left, tess.xyz[ndx]); // start right corner VectorSubtract(start, left, tess.xyz[ndx+1]); } // end right corner VectorSubtract(end, left, tess.xyz[ndx+2]); // end left corner VectorAdd(end, left, tess.xyz[ndx+3]); if(corners) { // save the end corner points here. VectorCopy(tess.xyz[ndx+3], corners[0]); VectorCopy(tess.xyz[ndx+2], corners[1]); } // Texture stuff.... tess.texCoords[ndx][0][0] = 0; tess.texCoords[ndx][0][1] = starttex; tess.texCoords[ndx+1][0][0] = 1; tess.texCoords[ndx+1][0][1] = starttex; tess.texCoords[ndx+2][0][0] = 1; tess.texCoords[ndx+2][0][1] = endtex; tess.texCoords[ndx+3][0][0] = 0; tess.texCoords[ndx+3][0][1] = endtex; vertcols = tess.vertexColors; vertcols[ndx][0] = vertcols[ndx+1][0] = vertcols[ndx+2][0] = vertcols[ndx+3][0] = e->shaderRGBA[0] / 255.0f; vertcols[ndx][1] = vertcols[ndx+1][1] = vertcols[ndx+2][1] = vertcols[ndx+3][1] = e->shaderRGBA[1] / 255.0f; vertcols[ndx][2] = vertcols[ndx+1][2] = vertcols[ndx+2][2] = vertcols[ndx+3][2] = e->shaderRGBA[2] / 255.0f; vertcols[ndx][3] = vertcols[ndx+1][3] = vertcols[ndx+2][3] = vertcols[ndx+3][3] = e->shaderRGBA[3] / 255.0f; tess.numVertexes += 4; tess.numIndexes += 6; } // Create a normal vector and scale it to the right length void RB_LineNormal(vec3_t vec1, vec3_t vec2, float scale, vec3_t result) { // Create the offset vector for the width of the line CrossProduct(vec1, vec2, result); // Normalize the offset vector first. VectorNormalize(result); // Scale the offset vector to the intended width. VectorScale(result, scale / 2, result); } // Let's draw a thick line from A to B and dance happily around a christmas tree! void RB_SurfaceLine( void ) { refEntity_t *e; vec3_t left; // I vote the green party... vec3_t start, end, linedirection, start2origin; shader_t *surfshader; e = &backEnd.currentEntity->e; // Getting up before 1:00 pm to attend HM I lectures finally paid off.. // Get the start and end point of the line VectorCopy(e->origin, start); VectorCopy(e->oldorigin, end); // Direction vector for the line: VectorSubtract(end, start, linedirection); // Direction vector for the start to current point of view VectorSubtract(backEnd.viewParms.or.origin, start, start2origin); RB_LineNormal(start2origin, linedirection, e->data.line.width, left); RB_Line(start, end, linedirection, left, NULL, 0, e->data.line.stscale, e); // Hack to make the dreadnought lightning bolt work: set the correct cull type... if((surfshader = R_GetShaderByHandle(e->customShader))) surfshader->cullType = CT_TWO_SIDED; } void RB_SurfaceOrientedLine(void) { refEntity_t *e; vec3_t left; vec3_t linedirection; shader_t *surfshader; e = &backEnd.currentEntity->e; VectorSubtract(e->oldorigin, e->origin, linedirection); VectorCopy(e->axis[1], left); VectorNormalize(left); VectorScale(left, e->data.line.width / 2, left); RB_Line(e->origin, e->oldorigin, linedirection, left, NULL, 0, 1, e); surfshader = R_GetShaderByHandle(e->customShader); surfshader->cullType = CT_TWO_SIDED; } // This time it's not a rectangle but a trapezoid I guess ... void RB_SurfaceLine2( void ) { refEntity_t *e; vec3_t startleft, endleft; // I still vote the green party... vec3_t start, end, linedirection, start2origin; vec4_t *vertcols; int ndx, numind; RB_CHECKOVERFLOW( 6, 12 ); e = &backEnd.currentEntity->e; // Set up the triangle .. ndx = tess.numVertexes; numind = tess.numIndexes; tess.indexes[ numind ] = ndx; tess.indexes[ numind + 1 ] = ndx + 1; tess.indexes[ numind + 2 ] = ndx + 5; tess.indexes[ numind + 3 ] = ndx + 5; tess.indexes[ numind + 4 ] = ndx + 4; tess.indexes[ numind + 5 ] = ndx + 1; tess.indexes[ numind + 6 ] = ndx + 1; tess.indexes[ numind + 7 ] = ndx + 4; tess.indexes[ numind + 8 ] = ndx + 3; tess.indexes[ numind + 9 ] = ndx + 3; tess.indexes[ numind + 10 ] = ndx + 2; tess.indexes[ numind + 11 ] = ndx + 1; // Get the start and end point of the line VectorCopy(e->origin, start); VectorCopy(e->oldorigin, end); // Direction vector for the line: VectorSubtract(end, start, linedirection); // Direction vector for the start to current point of view VectorSubtract(backEnd.viewParms.or.origin, start, start2origin); // Create the offset vector for the width of the line CrossProduct(start2origin, linedirection, startleft); // Normalize the offset vector first. VectorNormalize(startleft); // The normal of the triangle we just thought up: // Scale the offset vector to the intended width. VectorScale(startleft, e->data.line.width2 / 2, endleft); VectorScale(startleft, e->data.line.width / 2, startleft); // now create the corner vertices // start left corner VectorAdd(start, startleft, tess.xyz[ndx]); // start point VectorCopy(start, tess.xyz[ndx+1]); // start right corner VectorSubtract(start, startleft, tess.xyz[ndx+2]); // end right corner VectorSubtract(end, endleft, tess.xyz[ndx+3]); // end point VectorCopy(end, tess.xyz[ndx+4]); // end left corner VectorAdd(end, endleft, tess.xyz[ndx+5]); // Texture stuff.... tess.texCoords[ndx][0][0] = 0; tess.texCoords[ndx][0][1] = 0; tess.texCoords[ndx+1][0][0] = 0.5; tess.texCoords[ndx+1][0][1] = 0; tess.texCoords[ndx+2][0][0] = 1; tess.texCoords[ndx+2][0][1] = 0; tess.texCoords[ndx+3][0][0] = 1; tess.texCoords[ndx+3][0][1] = 1; tess.texCoords[ndx+4][0][0] = 0.5; tess.texCoords[ndx+4][0][1] = 1; tess.texCoords[ndx+5][0][0] = 0; tess.texCoords[ndx+5][0][1] = 1; vertcols = tess.vertexColors; vertcols[ndx][0] = vertcols[ndx+1][0] = vertcols[ndx+2][0] = vertcols[ndx+3][0] = vertcols[ndx+4][0] = vertcols[ndx+5][0] = e->shaderRGBA[0] / 255.0f; vertcols[ndx][1] = vertcols[ndx+1][1] = vertcols[ndx+2][1] = vertcols[ndx+3][1] = vertcols[ndx+4][1] = vertcols[ndx+5][1] = e->shaderRGBA[1] / 255.0f; vertcols[ndx][2] = vertcols[ndx+1][2] = vertcols[ndx+2][2] = vertcols[ndx+3][2] = vertcols[ndx+4][2] = vertcols[ndx+5][2] = e->shaderRGBA[2] / 255.0f; vertcols[ndx][3] = vertcols[ndx+1][3] = vertcols[ndx+2][3] = vertcols[ndx+3][3] = vertcols[ndx+4][3] = vertcols[ndx+5][3] = e->shaderRGBA[3] / 255.0f; tess.numVertexes += 6; tess.numIndexes += 12; } // Draw a cubic bezier curve for the imod weapon. #define BEZIER_SEGMENTS 32 #define BEZIER_STEPSIZE 1.0 / BEZIER_SEGMENTS void RB_SurfaceBezier(void) { refEntity_t *e = &backEnd.currentEntity->e; double tvar = 0, one_tvar; // use double to not lose as much precision on cubing and squaring. float starttc, endtc; vec3_t segstartpos, segendpos, prevend[2]; vec3_t linedirection, start2origin, left; int index; VectorCopy(e->origin, segstartpos); // start of the bezier curve is pointy VectorCopy(segstartpos, prevend[0]); VectorCopy(segstartpos, prevend[1]); // iterate through all segments we have to create. while(tvar <= 1.0) { // get the texture position for the rectangular approximating the bezier curve. starttc = tvar / 2.0; tvar += BEZIER_STEPSIZE; endtc = tvar / 2.0; one_tvar = 1.0 - tvar; // get the endpoint for this segment. for(index = 0; index < 3; index++) { // C(t) = P0 (t-1)^3 + 3 P1 t (t-1)^2 + 3 P2 t^2 (t-1) + P3 t^3 segendpos[index] = e->origin[index] * one_tvar * one_tvar * one_tvar + 3 * e->data.bezier.control1[index] * tvar * one_tvar * one_tvar + 3 * e->data.bezier.control2[index] * tvar * tvar * one_tvar + e->oldorigin[index] * tvar * tvar * tvar; } // Direction vector for the line: VectorSubtract(segendpos, segstartpos, linedirection); // Direction vector for the start to current point of view VectorSubtract(backEnd.viewParms.or.origin, segstartpos, start2origin); RB_LineNormal(start2origin, linedirection, e->data.bezier.width, left); RB_Line(segstartpos, segendpos, linedirection, left, prevend, starttc, endtc, e); // Our next segment starts where the old one ends. VectorCopy(segendpos, segstartpos); } } // this actually isn't a cylinder but a frustum, but for the sake of naming // conventions we'll keep calling it a cylinder. // number of rectangles we'll use to approximate a frustum of a cone. #define CYLINDER_MAXPLANES 64 #define LOD_CONSTANT 4.0f void RB_SurfaceCylinder(void) { int planes, index = 0; // calculate the number of planes based on the level of detail. vec3_t bottom, top, bottom2top, zerodeg_bottom, zerodeg_top, faxis; vec3_t bottomcorner, topcorner, vieworigin; float anglestep, tcstep = 0, width, width2, height; int ndx, numind; vec4_t *vertcols; refEntity_t *e = &backEnd.currentEntity->e; // for LOD calculation: vec3_t bottom2origin, top2origin, lodcalc, projection; float maxradius, startdistance, enddistance, distance; height = e->data.cylinder.height; width = e->data.cylinder.width; width2 = e->data.cylinder.width2; maxradius = (width > width2) ? width : width2; // get the start and end point of the frustum: VectorCopy(backEnd.viewParms.or.origin, vieworigin); VectorCopy(e->axis[0], faxis); VectorCopy(e->origin, bottom); VectorScale(faxis, height, bottom2top); VectorAdd(bottom, bottom2top, top); // Get distance from frustum: // first distance from endpoints VectorSubtract(vieworigin, bottom, bottom2origin); VectorSubtract(vieworigin, top, top2origin); // get projection of view origin on the middle line: distance = DotProduct(bottom2origin, faxis); startdistance = VectorLength(bottom2origin); enddistance = VectorLength(top2origin); if(distance < 0 || distance > height) { // projected point is not between bottom and top. distance = (startdistance < enddistance) ? startdistance : enddistance; } else { VectorMA(bottom, distance, faxis, projection); VectorSubtract(vieworigin, projection, lodcalc); distance = VectorLength(lodcalc); if(startdistance < distance) distance = startdistance; if(enddistance < distance) distance = enddistance; } planes = LOD_CONSTANT * maxradius/distance * CYLINDER_MAXPLANES; if(planes < 8) planes = 8; else if(planes > CYLINDER_MAXPLANES) planes = CYLINDER_MAXPLANES; RB_CHECKOVERFLOW(4 * planes, 6 * planes); // create a normalized perpendicular vector to the frustum height. PerpendicularVector(zerodeg_bottom, faxis); // This vector gets rotated to create the top ring VectorScale(zerodeg_bottom, width2 / 2.0f, zerodeg_top); // Likewise the vector for the lower ring: VectorScale(zerodeg_bottom, width / 2.0f, zerodeg_bottom); anglestep = 360.0f / planes; if(e->data.cylinder.wrap) tcstep = e->data.cylinder.stscale / planes; ndx = tess.numVertexes; numind = tess.numIndexes; vertcols = tess.vertexColors; // this loop is creating all surface planes. while(index < planes) { index++; // Set up the indexes for the new plane: tess.indexes[numind++] = ndx; tess.indexes[numind++] = ndx + 2; tess.indexes[numind++] = ndx + 3; tess.indexes[numind++] = ndx; tess.indexes[numind++] = ndx + 3; tess.indexes[numind++] = ndx + 1; if(index <= 1) { VectorAdd(bottom, zerodeg_bottom, tess.xyz[ndx]); VectorAdd(top, zerodeg_top, tess.xyz[ndx + 1]); } else { VectorCopy(bottomcorner, tess.xyz[ndx]); VectorCopy(topcorner, tess.xyz[ndx + 1]); } // Create on the right side two new vertices, first the bottom, then the top one. if(index >= planes) { VectorAdd(bottom, zerodeg_bottom, bottomcorner); VectorAdd(top, zerodeg_top, topcorner); } else { RotatePointAroundVector(bottomcorner, faxis, zerodeg_bottom, anglestep * index); VectorAdd(bottom, bottomcorner, bottomcorner); RotatePointAroundVector(topcorner, faxis, zerodeg_top, index * anglestep); VectorAdd(top, topcorner, topcorner); } VectorCopy(bottomcorner, tess.xyz[ndx + 2]); VectorCopy(topcorner, tess.xyz[ndx + 3]); // Take care about the texture stuff if(e->data.cylinder.wrap) { tess.texCoords[ndx][0][0] = tcstep * (index - 1); tess.texCoords[ndx][0][1] = 0; tess.texCoords[ndx+1][0][0] = tcstep * (index - 1); tess.texCoords[ndx+1][0][1] = 1; tess.texCoords[ndx+2][0][0] = tcstep * index; tess.texCoords[ndx+2][0][1] = 0; tess.texCoords[ndx+3][0][0] = tcstep * index; tess.texCoords[ndx+3][0][1] = 1; } else { tess.texCoords[ndx][0][0] = 0; tess.texCoords[ndx][0][1] = 0; tess.texCoords[ndx+1][0][0] = 0; tess.texCoords[ndx+1][0][1] = 1; tess.texCoords[ndx+2][0][0] = e->data.cylinder.stscale; tess.texCoords[ndx+2][0][1] = 0; tess.texCoords[ndx+3][0][0] = e->data.cylinder.stscale; tess.texCoords[ndx+3][0][1] = 1; } vertcols[ndx][0] = vertcols[ndx+1][0] = vertcols[ndx+2][0] = vertcols[ndx+3][0] = e->shaderRGBA[0] / 255.0f; vertcols[ndx][1] = vertcols[ndx+1][1] = vertcols[ndx+2][1] = vertcols[ndx+3][1] = e->shaderRGBA[1] / 255.0f; vertcols[ndx][2] = vertcols[ndx+1][2] = vertcols[ndx+2][2] = vertcols[ndx+3][2] = e->shaderRGBA[2] / 255.0f; vertcols[ndx][3] = vertcols[ndx+1][3] = vertcols[ndx+2][3] = vertcols[ndx+3][3] = 1.0f; ndx += 4; } tess.numVertexes = ndx; tess.numIndexes = numind; } // Draws lightning using a multisegment line with jumpy connecting points. #define ELECTRICITY_SEGMENTS 16 #define ELECTRICITY_STEPSIZE 1.0 / ELECTRICITY_SEGMENTS void RB_SurfaceElectricity(void) { vec3_t start, end, linedirection, segstartpos, segendpos; vec3_t prevend[2], left, start2origin, start2end; refEntity_t *e = &backEnd.currentEntity->e; float width, deviation, veclen; int index; VectorCopy(e->origin, start); VectorCopy(e->oldorigin, end); VectorSubtract(end, start, start2end); veclen = VectorLength(start2end); width = e->data.electricity.width; deviation = e->data.electricity.deviation; VectorCopy(start, segendpos); for(index = 0; index < ELECTRICITY_SEGMENTS; index++) { VectorCopy(segendpos, segstartpos); if(index > ELECTRICITY_SEGMENTS - 2) { // This is the last segment. VectorCopy(end, segendpos); } else { if(index > ELECTRICITY_SEGMENTS - 3) { // The line should have somewhat deviated by now. // Make the last two segments go to the endpoint // get the middle point between startpos and endpos VectorAdd(segstartpos, end, segendpos); VectorScale(segendpos, 0.5f, segendpos); } // Slightly misplace the next point on the line. segendpos[PITCH] += (start2end[PITCH] + crandom() * deviation * veclen) * ELECTRICITY_STEPSIZE; segendpos[YAW] += (start2end[YAW] + crandom() * deviation * veclen) * ELECTRICITY_STEPSIZE; segendpos[ROLL] += (start2end[ROLL] + crandom() * deviation * veclen / 2.0) * ELECTRICITY_STEPSIZE; } // Direction vector for the line: VectorSubtract(segendpos, segstartpos, linedirection); // Direction vector for the start to current point of view VectorSubtract(backEnd.viewParms.or.origin, segstartpos, start2origin); RB_LineNormal(start2origin, linedirection, width, left); if(!index) { // this is our first segment, create the starting points VectorAdd(segstartpos, left, prevend[0]); VectorSubtract(segstartpos, left, prevend[1]); } RB_Line(segstartpos, segendpos, linedirection, left, prevend, 0, e->data.electricity.stscale, e); } } #endif /* ============== RB_SurfaceBeam ============== */ static void RB_SurfaceBeam( void ) { #define NUM_BEAM_SEGS 6 refEntity_t *e; shaderProgram_t *sp = &tr.textureColorShader; int i; vec3_t perpvec; vec3_t direction, normalized_direction; vec3_t start_points[NUM_BEAM_SEGS], end_points[NUM_BEAM_SEGS]; vec3_t oldorigin, origin; e = &backEnd.currentEntity->e; oldorigin[0] = e->oldorigin[0]; oldorigin[1] = e->oldorigin[1]; oldorigin[2] = e->oldorigin[2]; origin[0] = e->origin[0]; origin[1] = e->origin[1]; origin[2] = e->origin[2]; normalized_direction[0] = direction[0] = oldorigin[0] - origin[0]; normalized_direction[1] = direction[1] = oldorigin[1] - origin[1]; normalized_direction[2] = direction[2] = oldorigin[2] - origin[2]; if ( VectorNormalize( normalized_direction ) == 0 ) return; PerpendicularVector( perpvec, normalized_direction ); VectorScale( perpvec, 4, perpvec ); for ( i = 0; i < NUM_BEAM_SEGS ; i++ ) { RotatePointAroundVector( start_points[i], normalized_direction, perpvec, (360.0/NUM_BEAM_SEGS)*i ); // VectorAdd( start_points[i], origin, start_points[i] ); VectorAdd( start_points[i], direction, end_points[i] ); } GL_Bind( tr.whiteImage ); GL_State( GLS_SRCBLEND_ONE | GLS_DSTBLEND_ONE ); // FIXME: Quake3 doesn't use this, so I never tested it tess.numVertexes = 0; tess.numIndexes = 0; tess.firstIndex = 0; tess.minIndex = 0; tess.maxIndex = 0; for ( i = 0; i <= NUM_BEAM_SEGS; i++ ) { VectorCopy(start_points[ i % NUM_BEAM_SEGS ], tess.xyz[tess.numVertexes++]); VectorCopy(end_points [ i % NUM_BEAM_SEGS ], tess.xyz[tess.numVertexes++]); } for ( i = 0; i < NUM_BEAM_SEGS; i++ ) { tess.indexes[tess.numIndexes++] = i * 2; tess.indexes[tess.numIndexes++] = (i + 1) * 2; tess.indexes[tess.numIndexes++] = 1 + i * 2; tess.indexes[tess.numIndexes++] = 1 + i * 2; tess.indexes[tess.numIndexes++] = (i + 1) * 2; tess.indexes[tess.numIndexes++] = 1 + (i + 1) * 2; } tess.minIndex = 0; tess.maxIndex = tess.numVertexes; // FIXME: A lot of this can probably be removed for speed, and refactored into a more convenient function RB_UpdateTessVao(ATTR_POSITION); GLSL_BindProgram(sp); GLSL_SetUniformMat4(sp, UNIFORM_MODELVIEWPROJECTIONMATRIX, glState.modelviewProjection); GLSL_SetUniformVec4(sp, UNIFORM_COLOR, colorRed); R_DrawElementsVao(tess.numIndexes, tess.firstIndex, tess.minIndex, tess.maxIndex); tess.numIndexes = 0; tess.numVertexes = 0; tess.firstIndex = 0; tess.minIndex = 0; tess.maxIndex = 0; } //================================================================================ static void DoRailCore( const vec3_t start, const vec3_t end, const vec3_t up, float len, float spanWidth ) { float spanWidth2; int vbase; float t = len / 256.0f; RB_CheckVao(tess.vao); RB_CHECKOVERFLOW( 4, 6 ); vbase = tess.numVertexes; spanWidth2 = -spanWidth; // FIXME: use quad stamp? VectorMA( start, spanWidth, up, tess.xyz[tess.numVertexes] ); tess.texCoords[tess.numVertexes][0][0] = 0; tess.texCoords[tess.numVertexes][0][1] = 0; tess.vertexColors[tess.numVertexes][0] = backEnd.currentEntity->e.shaderRGBA[0] * 0.25 / 255.0f; tess.vertexColors[tess.numVertexes][1] = backEnd.currentEntity->e.shaderRGBA[1] * 0.25 / 255.0f; tess.vertexColors[tess.numVertexes][2] = backEnd.currentEntity->e.shaderRGBA[2] * 0.25 / 255.0f; tess.numVertexes++; VectorMA( start, spanWidth2, up, tess.xyz[tess.numVertexes] ); tess.texCoords[tess.numVertexes][0][0] = 0; tess.texCoords[tess.numVertexes][0][1] = 1; tess.vertexColors[tess.numVertexes][0] = backEnd.currentEntity->e.shaderRGBA[0] / 255.0f; tess.vertexColors[tess.numVertexes][1] = backEnd.currentEntity->e.shaderRGBA[1] / 255.0f; tess.vertexColors[tess.numVertexes][2] = backEnd.currentEntity->e.shaderRGBA[2] / 255.0f; tess.numVertexes++; VectorMA( end, spanWidth, up, tess.xyz[tess.numVertexes] ); tess.texCoords[tess.numVertexes][0][0] = t; tess.texCoords[tess.numVertexes][0][1] = 0; tess.vertexColors[tess.numVertexes][0] = backEnd.currentEntity->e.shaderRGBA[0] / 255.0f; tess.vertexColors[tess.numVertexes][1] = backEnd.currentEntity->e.shaderRGBA[1] / 255.0f; tess.vertexColors[tess.numVertexes][2] = backEnd.currentEntity->e.shaderRGBA[2] / 255.0f; tess.numVertexes++; VectorMA( end, spanWidth2, up, tess.xyz[tess.numVertexes] ); tess.texCoords[tess.numVertexes][0][0] = t; tess.texCoords[tess.numVertexes][0][1] = 1; tess.vertexColors[tess.numVertexes][0] = backEnd.currentEntity->e.shaderRGBA[0] / 255.0f; tess.vertexColors[tess.numVertexes][1] = backEnd.currentEntity->e.shaderRGBA[1] / 255.0f; tess.vertexColors[tess.numVertexes][2] = backEnd.currentEntity->e.shaderRGBA[2] / 255.0f; tess.numVertexes++; tess.indexes[tess.numIndexes++] = vbase; tess.indexes[tess.numIndexes++] = vbase + 1; tess.indexes[tess.numIndexes++] = vbase + 2; tess.indexes[tess.numIndexes++] = vbase + 2; tess.indexes[tess.numIndexes++] = vbase + 1; tess.indexes[tess.numIndexes++] = vbase + 3; } static void DoRailDiscs( int numSegs, const vec3_t start, const vec3_t dir, const vec3_t right, const vec3_t up ) { int i; vec3_t pos[4]; vec3_t v; int spanWidth = r_railWidth->integer; float c, s; float scale; if ( numSegs > 1 ) numSegs--; if ( !numSegs ) return; scale = 0.25; for ( i = 0; i < 4; i++ ) { c = cos( DEG2RAD( 45 + i * 90 ) ); s = sin( DEG2RAD( 45 + i * 90 ) ); v[0] = ( right[0] * c + up[0] * s ) * scale * spanWidth; v[1] = ( right[1] * c + up[1] * s ) * scale * spanWidth; v[2] = ( right[2] * c + up[2] * s ) * scale * spanWidth; VectorAdd( start, v, pos[i] ); if ( numSegs > 1 ) { // offset by 1 segment if we're doing a long distance shot VectorAdd( pos[i], dir, pos[i] ); } } RB_CheckVao(tess.vao); for ( i = 0; i < numSegs; i++ ) { int j; RB_CHECKOVERFLOW( 4, 6 ); for ( j = 0; j < 4; j++ ) { VectorCopy( pos[j], tess.xyz[tess.numVertexes] ); tess.texCoords[tess.numVertexes][0][0] = ( j < 2 ); tess.texCoords[tess.numVertexes][0][1] = ( j && j != 3 ); tess.vertexColors[tess.numVertexes][0] = backEnd.currentEntity->e.shaderRGBA[0] / 255.0f; tess.vertexColors[tess.numVertexes][1] = backEnd.currentEntity->e.shaderRGBA[1] / 255.0f; tess.vertexColors[tess.numVertexes][2] = backEnd.currentEntity->e.shaderRGBA[2] / 255.0f; tess.numVertexes++; VectorAdd( pos[j], dir, pos[j] ); } tess.indexes[tess.numIndexes++] = tess.numVertexes - 4 + 0; tess.indexes[tess.numIndexes++] = tess.numVertexes - 4 + 1; tess.indexes[tess.numIndexes++] = tess.numVertexes - 4 + 3; tess.indexes[tess.numIndexes++] = tess.numVertexes - 4 + 3; tess.indexes[tess.numIndexes++] = tess.numVertexes - 4 + 1; tess.indexes[tess.numIndexes++] = tess.numVertexes - 4 + 2; } } /* ** RB_SurfaceRailRinges */ static void RB_SurfaceRailRings( void ) { refEntity_t *e; int numSegs; int len; vec3_t vec; vec3_t right, up; vec3_t start, end; e = &backEnd.currentEntity->e; VectorCopy( e->oldorigin, start ); VectorCopy( e->origin, end ); // compute variables VectorSubtract( end, start, vec ); len = VectorNormalize( vec ); MakeNormalVectors( vec, right, up ); numSegs = ( len ) / r_railSegmentLength->value; if ( numSegs <= 0 ) { numSegs = 1; } VectorScale( vec, r_railSegmentLength->value, vec ); DoRailDiscs( numSegs, start, vec, right, up ); } /* ** RB_SurfaceRailCore */ static void RB_SurfaceRailCore( void ) { refEntity_t *e; int len; vec3_t right; vec3_t vec; vec3_t start, end; vec3_t v1, v2; e = &backEnd.currentEntity->e; VectorCopy( e->oldorigin, start ); VectorCopy( e->origin, end ); VectorSubtract( end, start, vec ); len = VectorNormalize( vec ); // compute side vector VectorSubtract( start, backEnd.viewParms.or.origin, v1 ); VectorNormalize( v1 ); VectorSubtract( end, backEnd.viewParms.or.origin, v2 ); VectorNormalize( v2 ); CrossProduct( v1, v2, right ); VectorNormalize( right ); DoRailCore( start, end, right, len, r_railCoreWidth->integer ); } /* ** RB_SurfaceLightningBolt */ static void RB_SurfaceLightningBolt( void ) { refEntity_t *e; int len; vec3_t right; vec3_t vec; vec3_t start, end; vec3_t v1, v2; int i; e = &backEnd.currentEntity->e; VectorCopy( e->oldorigin, end ); VectorCopy( e->origin, start ); // compute variables VectorSubtract( end, start, vec ); len = VectorNormalize( vec ); // compute side vector VectorSubtract( start, backEnd.viewParms.or.origin, v1 ); VectorNormalize( v1 ); VectorSubtract( end, backEnd.viewParms.or.origin, v2 ); VectorNormalize( v2 ); CrossProduct( v1, v2, right ); VectorNormalize( right ); for ( i = 0 ; i < 4 ; i++ ) { vec3_t temp; DoRailCore( start, end, right, len, 8 ); RotatePointAroundVector( temp, vec, right, 45 ); VectorCopy( temp, right ); } } #if 0 /* ** VectorArrayNormalize * * The inputs to this routing seem to always be close to length = 1.0 (about 0.6 to 2.0) * This means that we don't have to worry about zero length or enormously long vectors. */ static void VectorArrayNormalize(vec4_t *normals, unsigned int count) { // assert(count); #if idppc { register float half = 0.5; register float one = 1.0; float *components = (float *)normals; // Vanilla PPC code, but since PPC has a reciprocal square root estimate instruction, // runs *much* faster than calling sqrt(). We'll use a single Newton-Raphson // refinement step to get a little more precision. This seems to yeild results // that are correct to 3 decimal places and usually correct to at least 4 (sometimes 5). // (That is, for the given input range of about 0.6 to 2.0). do { float x, y, z; float B, y0, y1; x = components[0]; y = components[1]; z = components[2]; components += 4; B = x*x + y*y + z*z; #ifdef __GNUC__ asm("frsqrte %0,%1" : "=f" (y0) : "f" (B)); #else y0 = __frsqrte(B); #endif y1 = y0 + half*y0*(one - B*y0*y0); x = x * y1; y = y * y1; components[-4] = x; z = z * y1; components[-3] = y; components[-2] = z; } while(count--); } #else // No assembly version for this architecture, or C_ONLY defined // given the input, it's safe to call VectorNormalizeFast while (count--) { VectorNormalizeFast(normals[0]); normals++; } #endif } #endif /* ** LerpMeshVertexes */ #if 0 #if idppc_altivec static void LerpMeshVertexes_altivec(md3Surface_t *surf, float backlerp) { short *oldXyz, *newXyz, *oldNormals, *newNormals; float *outXyz, *outNormal; float oldXyzScale QALIGN(16); float newXyzScale QALIGN(16); float oldNormalScale QALIGN(16); float newNormalScale QALIGN(16); int vertNum; unsigned lat, lng; int numVerts; outXyz = tess.xyz[tess.numVertexes]; outNormal = tess.normal[tess.numVertexes]; newXyz = (short *)((byte *)surf + surf->ofsXyzNormals) + (backEnd.currentEntity->e.frame * surf->numVerts * 4); newNormals = newXyz + 3; newXyzScale = MD3_XYZ_SCALE * (1.0 - backlerp); newNormalScale = 1.0 - backlerp; numVerts = surf->numVerts; if ( backlerp == 0 ) { vector signed short newNormalsVec0; vector signed short newNormalsVec1; vector signed int newNormalsIntVec; vector float newNormalsFloatVec; vector float newXyzScaleVec; vector unsigned char newNormalsLoadPermute; vector unsigned char newNormalsStorePermute; vector float zero; newNormalsStorePermute = vec_lvsl(0,(float *)&newXyzScaleVec); newXyzScaleVec = *(vector float *)&newXyzScale; newXyzScaleVec = vec_perm(newXyzScaleVec,newXyzScaleVec,newNormalsStorePermute); newXyzScaleVec = vec_splat(newXyzScaleVec,0); newNormalsLoadPermute = vec_lvsl(0,newXyz); newNormalsStorePermute = vec_lvsr(0,outXyz); zero = (vector float)vec_splat_s8(0); // // just copy the vertexes // for (vertNum=0 ; vertNum < numVerts ; vertNum++, newXyz += 4, newNormals += 4, outXyz += 4, outNormal += 4) { newNormalsLoadPermute = vec_lvsl(0,newXyz); newNormalsStorePermute = vec_lvsr(0,outXyz); newNormalsVec0 = vec_ld(0,newXyz); newNormalsVec1 = vec_ld(16,newXyz); newNormalsVec0 = vec_perm(newNormalsVec0,newNormalsVec1,newNormalsLoadPermute); newNormalsIntVec = vec_unpackh(newNormalsVec0); newNormalsFloatVec = vec_ctf(newNormalsIntVec,0); newNormalsFloatVec = vec_madd(newNormalsFloatVec,newXyzScaleVec,zero); newNormalsFloatVec = vec_perm(newNormalsFloatVec,newNormalsFloatVec,newNormalsStorePermute); //outXyz[0] = newXyz[0] * newXyzScale; //outXyz[1] = newXyz[1] * newXyzScale; //outXyz[2] = newXyz[2] * newXyzScale; lat = ( newNormals[0] >> 8 ) & 0xff; lng = ( newNormals[0] & 0xff ); lat *= (FUNCTABLE_SIZE/256); lng *= (FUNCTABLE_SIZE/256); // decode X as cos( lat ) * sin( long ) // decode Y as sin( lat ) * sin( long ) // decode Z as cos( long ) outNormal[0] = tr.sinTable[(lat+(FUNCTABLE_SIZE/4))&FUNCTABLE_MASK] * tr.sinTable[lng]; outNormal[1] = tr.sinTable[lat] * tr.sinTable[lng]; outNormal[2] = tr.sinTable[(lng+(FUNCTABLE_SIZE/4))&FUNCTABLE_MASK]; vec_ste(newNormalsFloatVec,0,outXyz); vec_ste(newNormalsFloatVec,4,outXyz); vec_ste(newNormalsFloatVec,8,outXyz); } } else { // // interpolate and copy the vertex and normal // oldXyz = (short *)((byte *)surf + surf->ofsXyzNormals) + (backEnd.currentEntity->e.oldframe * surf->numVerts * 4); oldNormals = oldXyz + 3; oldXyzScale = MD3_XYZ_SCALE * backlerp; oldNormalScale = backlerp; for (vertNum=0 ; vertNum < numVerts ; vertNum++, oldXyz += 4, newXyz += 4, oldNormals += 4, newNormals += 4, outXyz += 4, outNormal += 4) { vec3_t uncompressedOldNormal, uncompressedNewNormal; // interpolate the xyz outXyz[0] = oldXyz[0] * oldXyzScale + newXyz[0] * newXyzScale; outXyz[1] = oldXyz[1] * oldXyzScale + newXyz[1] * newXyzScale; outXyz[2] = oldXyz[2] * oldXyzScale + newXyz[2] * newXyzScale; // FIXME: interpolate lat/long instead? lat = ( newNormals[0] >> 8 ) & 0xff; lng = ( newNormals[0] & 0xff ); lat *= 4; lng *= 4; uncompressedNewNormal[0] = tr.sinTable[(lat+(FUNCTABLE_SIZE/4))&FUNCTABLE_MASK] * tr.sinTable[lng]; uncompressedNewNormal[1] = tr.sinTable[lat] * tr.sinTable[lng]; uncompressedNewNormal[2] = tr.sinTable[(lng+(FUNCTABLE_SIZE/4))&FUNCTABLE_MASK]; lat = ( oldNormals[0] >> 8 ) & 0xff; lng = ( oldNormals[0] & 0xff ); lat *= 4; lng *= 4; uncompressedOldNormal[0] = tr.sinTable[(lat+(FUNCTABLE_SIZE/4))&FUNCTABLE_MASK] * tr.sinTable[lng]; uncompressedOldNormal[1] = tr.sinTable[lat] * tr.sinTable[lng]; uncompressedOldNormal[2] = tr.sinTable[(lng+(FUNCTABLE_SIZE/4))&FUNCTABLE_MASK]; outNormal[0] = uncompressedOldNormal[0] * oldNormalScale + uncompressedNewNormal[0] * newNormalScale; outNormal[1] = uncompressedOldNormal[1] * oldNormalScale + uncompressedNewNormal[1] * newNormalScale; outNormal[2] = uncompressedOldNormal[2] * oldNormalScale + uncompressedNewNormal[2] * newNormalScale; // VectorNormalize (outNormal); } VectorArrayNormalize((vec4_t *)tess.normal[tess.numVertexes], numVerts); } } #endif #endif static void LerpMeshVertexes_scalar(mdvSurface_t *surf, float backlerp) { #if 0 short *oldXyz, *newXyz, *oldNormals, *newNormals; float *outXyz, *outNormal; float oldXyzScale, newXyzScale; float oldNormalScale, newNormalScale; int vertNum; unsigned lat, lng; int numVerts; outXyz = tess.xyz[tess.numVertexes]; outNormal = tess.normal[tess.numVertexes]; newXyz = (short *)((byte *)surf + surf->ofsXyzNormals) + (backEnd.currentEntity->e.frame * surf->numVerts * 4); newNormals = newXyz + 3; newXyzScale = MD3_XYZ_SCALE * (1.0 - backlerp); newNormalScale = 1.0 - backlerp; numVerts = surf->numVerts; if ( backlerp == 0 ) { // // just copy the vertexes // for (vertNum=0 ; vertNum < numVerts ; vertNum++, newXyz += 4, newNormals += 4, outXyz += 4, outNormal += 4) { outXyz[0] = newXyz[0] * newXyzScale; outXyz[1] = newXyz[1] * newXyzScale; outXyz[2] = newXyz[2] * newXyzScale; lat = ( newNormals[0] >> 8 ) & 0xff; lng = ( newNormals[0] & 0xff ); lat *= (FUNCTABLE_SIZE/256); lng *= (FUNCTABLE_SIZE/256); // decode X as cos( lat ) * sin( long ) // decode Y as sin( lat ) * sin( long ) // decode Z as cos( long ) outNormal[0] = tr.sinTable[(lat+(FUNCTABLE_SIZE/4))&FUNCTABLE_MASK] * tr.sinTable[lng]; outNormal[1] = tr.sinTable[lat] * tr.sinTable[lng]; outNormal[2] = tr.sinTable[(lng+(FUNCTABLE_SIZE/4))&FUNCTABLE_MASK]; } } else { // // interpolate and copy the vertex and normal // oldXyz = (short *)((byte *)surf + surf->ofsXyzNormals) + (backEnd.currentEntity->e.oldframe * surf->numVerts * 4); oldNormals = oldXyz + 3; oldXyzScale = MD3_XYZ_SCALE * backlerp; oldNormalScale = backlerp; for (vertNum=0 ; vertNum < numVerts ; vertNum++, oldXyz += 4, newXyz += 4, oldNormals += 4, newNormals += 4, outXyz += 4, outNormal += 4) { vec3_t uncompressedOldNormal, uncompressedNewNormal; // interpolate the xyz outXyz[0] = oldXyz[0] * oldXyzScale + newXyz[0] * newXyzScale; outXyz[1] = oldXyz[1] * oldXyzScale + newXyz[1] * newXyzScale; outXyz[2] = oldXyz[2] * oldXyzScale + newXyz[2] * newXyzScale; // FIXME: interpolate lat/long instead? lat = ( newNormals[0] >> 8 ) & 0xff; lng = ( newNormals[0] & 0xff ); lat *= 4; lng *= 4; uncompressedNewNormal[0] = tr.sinTable[(lat+(FUNCTABLE_SIZE/4))&FUNCTABLE_MASK] * tr.sinTable[lng]; uncompressedNewNormal[1] = tr.sinTable[lat] * tr.sinTable[lng]; uncompressedNewNormal[2] = tr.sinTable[(lng+(FUNCTABLE_SIZE/4))&FUNCTABLE_MASK]; lat = ( oldNormals[0] >> 8 ) & 0xff; lng = ( oldNormals[0] & 0xff ); lat *= 4; lng *= 4; uncompressedOldNormal[0] = tr.sinTable[(lat+(FUNCTABLE_SIZE/4))&FUNCTABLE_MASK] * tr.sinTable[lng]; uncompressedOldNormal[1] = tr.sinTable[lat] * tr.sinTable[lng]; uncompressedOldNormal[2] = tr.sinTable[(lng+(FUNCTABLE_SIZE/4))&FUNCTABLE_MASK]; outNormal[0] = uncompressedOldNormal[0] * oldNormalScale + uncompressedNewNormal[0] * newNormalScale; outNormal[1] = uncompressedOldNormal[1] * oldNormalScale + uncompressedNewNormal[1] * newNormalScale; outNormal[2] = uncompressedOldNormal[2] * oldNormalScale + uncompressedNewNormal[2] * newNormalScale; // VectorNormalize (outNormal); } VectorArrayNormalize((vec4_t *)tess.normal[tess.numVertexes], numVerts); } #endif float *outXyz; uint32_t *outNormal; mdvVertex_t *newVerts; int vertNum; newVerts = surf->verts + backEnd.currentEntity->e.frame * surf->numVerts; outXyz = tess.xyz[tess.numVertexes]; outNormal = &tess.normal[tess.numVertexes]; if (backlerp == 0) { // // just copy the vertexes // for (vertNum=0 ; vertNum < surf->numVerts ; vertNum++) { vec3_t normal; VectorCopy(newVerts->xyz, outXyz); VectorCopy(newVerts->normal, normal); R_VaoPackNormal((byte *)outNormal, normal); newVerts++; outXyz += 4; outNormal++; } } else { // // interpolate and copy the vertex and normal // mdvVertex_t *oldVerts; oldVerts = surf->verts + backEnd.currentEntity->e.oldframe * surf->numVerts; for (vertNum=0 ; vertNum < surf->numVerts ; vertNum++) { vec3_t normal; VectorLerp(newVerts->xyz, oldVerts->xyz, backlerp, outXyz); VectorLerp(newVerts->normal, oldVerts->normal, backlerp, normal); VectorNormalize(normal); R_VaoPackNormal((byte *)outNormal, normal); newVerts++; oldVerts++; outXyz += 4; outNormal++; } } } static void LerpMeshVertexes(mdvSurface_t *surf, float backlerp) { #if 0 #if idppc_altivec if (com_altivec->integer) { // must be in a seperate function or G3 systems will crash. LerpMeshVertexes_altivec( surf, backlerp ); return; } #endif // idppc_altivec #endif LerpMeshVertexes_scalar( surf, backlerp ); } /* ============= RB_SurfaceMesh ============= */ static void RB_SurfaceMesh(mdvSurface_t *surface) { int j; float backlerp; mdvSt_t *texCoords; int Bob, Doug; int numVerts; if ( backEnd.currentEntity->e.oldframe == backEnd.currentEntity->e.frame ) { backlerp = 0; } else { backlerp = backEnd.currentEntity->e.backlerp; } RB_CheckVao(tess.vao); RB_CHECKOVERFLOW( surface->numVerts, surface->numIndexes ); LerpMeshVertexes (surface, backlerp); Bob = tess.numIndexes; Doug = tess.numVertexes; for (j = 0 ; j < surface->numIndexes ; j++) { tess.indexes[Bob + j] = Doug + surface->indexes[j]; } tess.numIndexes += surface->numIndexes; texCoords = surface->st; numVerts = surface->numVerts; for ( j = 0; j < numVerts; j++ ) { tess.texCoords[Doug + j][0][0] = texCoords[j].st[0]; tess.texCoords[Doug + j][0][1] = texCoords[j].st[1]; // FIXME: fill in lightmapST for completeness? } tess.numVertexes += surface->numVerts; } /* ============== RB_SurfaceFace ============== */ static void RB_SurfaceFace( srfBspSurface_t *srf ) { if( RB_SurfaceVao (srf->vao, srf->numVerts, srf->numIndexes, srf->firstIndex, srf->minIndex, srf->maxIndex, srf->dlightBits, srf->pshadowBits, qtrue ) ) { return; } RB_SurfaceVertsAndIndexes(srf->numVerts, srf->verts, srf->numIndexes, srf->indexes, srf->dlightBits, srf->pshadowBits); } static float LodErrorForVolume( vec3_t local, float radius ) { vec3_t world; float d; // never let it go negative if ( r_lodCurveError->value < 0 ) { return 0; } world[0] = local[0] * backEnd.or.axis[0][0] + local[1] * backEnd.or.axis[1][0] + local[2] * backEnd.or.axis[2][0] + backEnd.or.origin[0]; world[1] = local[0] * backEnd.or.axis[0][1] + local[1] * backEnd.or.axis[1][1] + local[2] * backEnd.or.axis[2][1] + backEnd.or.origin[1]; world[2] = local[0] * backEnd.or.axis[0][2] + local[1] * backEnd.or.axis[1][2] + local[2] * backEnd.or.axis[2][2] + backEnd.or.origin[2]; VectorSubtract( world, backEnd.viewParms.or.origin, world ); d = DotProduct( world, backEnd.viewParms.or.axis[0] ); if ( d < 0 ) { d = -d; } d -= radius; if ( d < 1 ) { d = 1; } return r_lodCurveError->value / d; } /* ============= RB_SurfaceGrid Just copy the grid of points and triangulate ============= */ static void RB_SurfaceGrid( srfBspSurface_t *srf ) { int i, j; float *xyz; float *texCoords, *lightCoords; uint32_t *normal; #ifdef USE_VERT_TANGENT_SPACE uint32_t *tangent; #endif float *color; uint32_t *lightdir; srfVert_t *dv; int rows, irows, vrows; int used; int widthTable[MAX_GRID_SIZE]; int heightTable[MAX_GRID_SIZE]; float lodError; int lodWidth, lodHeight; int numVertexes; int dlightBits; int pshadowBits; //int *vDlightBits; if( RB_SurfaceVao (srf->vao, srf->numVerts, srf->numIndexes, srf->firstIndex, srf->minIndex, srf->maxIndex, srf->dlightBits, srf->pshadowBits, qtrue ) ) { return; } RB_CheckVao(tess.vao); dlightBits = srf->dlightBits; tess.dlightBits |= dlightBits; pshadowBits = srf->pshadowBits; tess.pshadowBits |= pshadowBits; // determine the allowable discrepance lodError = LodErrorForVolume( srf->lodOrigin, srf->lodRadius ); // determine which rows and columns of the subdivision // we are actually going to use widthTable[0] = 0; lodWidth = 1; for ( i = 1 ; i < srf->width-1 ; i++ ) { if ( srf->widthLodError[i] <= lodError ) { widthTable[lodWidth] = i; lodWidth++; } } widthTable[lodWidth] = srf->width-1; lodWidth++; heightTable[0] = 0; lodHeight = 1; for ( i = 1 ; i < srf->height-1 ; i++ ) { if ( srf->heightLodError[i] <= lodError ) { heightTable[lodHeight] = i; lodHeight++; } } heightTable[lodHeight] = srf->height-1; lodHeight++; // very large grids may have more points or indexes than can be fit // in the tess structure, so we may have to issue it in multiple passes used = 0; while ( used < lodHeight - 1 ) { // see how many rows of both verts and indexes we can add without overflowing do { vrows = ( SHADER_MAX_VERTEXES - tess.numVertexes ) / lodWidth; irows = ( SHADER_MAX_INDEXES - tess.numIndexes ) / ( lodWidth * 6 ); // if we don't have enough space for at least one strip, flush the buffer if ( vrows < 2 || irows < 1 ) { RB_EndSurface(); RB_BeginSurface(tess.shader, tess.fogNum, tess.cubemapIndex ); } else { break; } } while ( 1 ); rows = irows; if ( vrows < irows + 1 ) { rows = vrows - 1; } if ( used + rows > lodHeight ) { rows = lodHeight - used; } numVertexes = tess.numVertexes; xyz = tess.xyz[numVertexes]; normal = &tess.normal[numVertexes]; #ifdef USE_VERT_TANGENT_SPACE tangent = &tess.tangent[numVertexes]; #endif texCoords = tess.texCoords[numVertexes][0]; lightCoords = tess.texCoords[numVertexes][1]; color = tess.vertexColors[numVertexes]; lightdir = &tess.lightdir[numVertexes]; //vDlightBits = &tess.vertexDlightBits[numVertexes]; for ( i = 0 ; i < rows ; i++ ) { for ( j = 0 ; j < lodWidth ; j++ ) { dv = srf->verts + heightTable[ used + i ] * srf->width + widthTable[ j ]; if ( tess.shader->vertexAttribs & ATTR_POSITION ) { VectorCopy(dv->xyz, xyz); xyz += 4; } if ( tess.shader->vertexAttribs & ATTR_NORMAL ) { R_VaoPackNormal((byte *)normal++, dv->normal); } #ifdef USE_VERT_TANGENT_SPACE if ( tess.shader->vertexAttribs & ATTR_TANGENT ) { R_VaoPackTangent((byte *)tangent++, dv->tangent); } #endif if ( tess.shader->vertexAttribs & ATTR_TEXCOORD ) { VectorCopy2(dv->st, texCoords); texCoords += 4; } if ( tess.shader->vertexAttribs & ATTR_LIGHTCOORD ) { VectorCopy2(dv->lightmap, lightCoords); lightCoords += 4; } if ( tess.shader->vertexAttribs & ATTR_COLOR ) { VectorCopy4(dv->vertexColors, color); color += 4; } if ( tess.shader->vertexAttribs & ATTR_LIGHTDIRECTION ) { R_VaoPackNormal((byte *)lightdir++, dv->lightdir); } //*vDlightBits++ = dlightBits; } } // add the indexes { int numIndexes; int w, h; h = rows - 1; w = lodWidth - 1; numIndexes = tess.numIndexes; for (i = 0 ; i < h ; i++) { for (j = 0 ; j < w ; j++) { int v1, v2, v3, v4; // vertex order to be reckognized as tristrips v1 = numVertexes + i*lodWidth + j + 1; v2 = v1 - 1; v3 = v2 + lodWidth; v4 = v3 + 1; tess.indexes[numIndexes] = v2; tess.indexes[numIndexes+1] = v3; tess.indexes[numIndexes+2] = v1; tess.indexes[numIndexes+3] = v1; tess.indexes[numIndexes+4] = v3; tess.indexes[numIndexes+5] = v4; numIndexes += 6; } } tess.numIndexes = numIndexes; } tess.numVertexes += rows * lodWidth; used += rows - 1; } } /* =========================================================================== NULL MODEL =========================================================================== */ /* =================== RB_SurfaceAxis Draws x/y/z lines from the origin for orientation debugging =================== */ static void RB_SurfaceAxis( void ) { // FIXME: implement this #if 0 GL_Bind( tr.whiteImage ); GL_State( GLS_DEFAULT ); qglLineWidth( 3 ); qglBegin( GL_LINES ); qglColor3f( 1,0,0 ); qglVertex3f( 0,0,0 ); qglVertex3f( 16,0,0 ); qglColor3f( 0,1,0 ); qglVertex3f( 0,0,0 ); qglVertex3f( 0,16,0 ); qglColor3f( 0,0,1 ); qglVertex3f( 0,0,0 ); qglVertex3f( 0,0,16 ); qglEnd(); qglLineWidth( 1 ); #endif } //=========================================================================== /* ==================== RB_SurfaceEntity Entities that have a single procedurally generated surface ==================== */ static void RB_SurfaceEntity( surfaceType_t *surfType ) { switch( backEnd.currentEntity->e.reType ) { #ifdef ELITEFORCE case RT_ALPHAVERTPOLY: #endif case RT_SPRITE: RB_SurfaceSprite(); break; case RT_BEAM: RB_SurfaceBeam(); break; case RT_RAIL_CORE: RB_SurfaceRailCore(); break; case RT_RAIL_RINGS: RB_SurfaceRailRings(); break; case RT_LIGHTNING: RB_SurfaceLightningBolt(); break; #ifdef ELITEFORCE case RT_ORIENTEDSPRITE: RB_SurfaceOrientedSprite(); break; case RT_LINE: RB_SurfaceLine(); break; case RT_ORIENTEDLINE: RB_SurfaceOrientedLine(); break; case RT_LINE2: RB_SurfaceLine2(); break; case RT_BEZIER: RB_SurfaceBezier(); break; case RT_CYLINDER: RB_SurfaceCylinder(); break; case RT_ELECTRICITY: RB_SurfaceElectricity(); break; #endif default: RB_SurfaceAxis(); break; } } static void RB_SurfaceBad( surfaceType_t *surfType ) { ri.Printf( PRINT_ALL, "Bad surface tesselated.\n" ); } static void RB_SurfaceFlare(srfFlare_t *surf) { if (r_flares->integer) RB_AddFlare(surf, tess.fogNum, surf->origin, surf->color, surf->normal); } static void RB_SurfaceVaoMesh(srfBspSurface_t * srf) { RB_SurfaceVao (srf->vao, srf->numVerts, srf->numIndexes, srf->firstIndex, srf->minIndex, srf->maxIndex, srf->dlightBits, srf->pshadowBits, qfalse ); } void RB_SurfaceVaoMdvMesh(srfVaoMdvMesh_t * surface) { //mdvModel_t *mdvModel; //mdvSurface_t *mdvSurface; refEntity_t *refEnt; GLimp_LogComment("--- RB_SurfaceVaoMdvMesh ---\n"); if(!surface->vao) return; //RB_CheckVao(surface->vao); RB_EndSurface(); RB_BeginSurface(tess.shader, tess.fogNum, tess.cubemapIndex); R_BindVao(surface->vao); tess.useInternalVao = qfalse; tess.numIndexes = surface->numIndexes; tess.numVertexes = surface->numVerts; tess.minIndex = surface->minIndex; tess.maxIndex = surface->maxIndex; //mdvModel = surface->mdvModel; //mdvSurface = surface->mdvSurface; refEnt = &backEnd.currentEntity->e; glState.vertexAttribsInterpolation = (refEnt->oldframe == refEnt->frame) ? 0.0f : refEnt->backlerp; if (surface->mdvModel->numFrames > 1) { int frameOffset, attribIndex; vaoAttrib_t *vAtb; glState.vertexAnimation = qtrue; if (glRefConfig.vertexArrayObject) { qglBindBufferARB(GL_ARRAY_BUFFER_ARB, surface->vao->vertexesVBO); } frameOffset = refEnt->frame * surface->vao->frameSize; attribIndex = ATTR_INDEX_POSITION; vAtb = &surface->vao->attribs[attribIndex]; qglVertexAttribPointerARB(attribIndex, vAtb->count, vAtb->type, vAtb->normalized, vAtb->stride, BUFFER_OFFSET(vAtb->offset + frameOffset)); attribIndex = ATTR_INDEX_NORMAL; vAtb = &surface->vao->attribs[attribIndex]; qglVertexAttribPointerARB(attribIndex, vAtb->count, vAtb->type, vAtb->normalized, vAtb->stride, BUFFER_OFFSET(vAtb->offset + frameOffset)); attribIndex = ATTR_INDEX_TANGENT; vAtb = &surface->vao->attribs[attribIndex]; qglVertexAttribPointerARB(attribIndex, vAtb->count, vAtb->type, vAtb->normalized, vAtb->stride, BUFFER_OFFSET(vAtb->offset + frameOffset)); frameOffset = refEnt->oldframe * surface->vao->frameSize; attribIndex = ATTR_INDEX_POSITION2; vAtb = &surface->vao->attribs[attribIndex]; qglVertexAttribPointerARB(attribIndex, vAtb->count, vAtb->type, vAtb->normalized, vAtb->stride, BUFFER_OFFSET(vAtb->offset + frameOffset)); attribIndex = ATTR_INDEX_NORMAL2; vAtb = &surface->vao->attribs[attribIndex]; qglVertexAttribPointerARB(attribIndex, vAtb->count, vAtb->type, vAtb->normalized, vAtb->stride, BUFFER_OFFSET(vAtb->offset + frameOffset)); attribIndex = ATTR_INDEX_TANGENT2; vAtb = &surface->vao->attribs[attribIndex]; qglVertexAttribPointerARB(attribIndex, vAtb->count, vAtb->type, vAtb->normalized, vAtb->stride, BUFFER_OFFSET(vAtb->offset + frameOffset)); if (!glRefConfig.vertexArrayObject) { attribIndex = ATTR_INDEX_TEXCOORD; vAtb = &surface->vao->attribs[attribIndex]; qglVertexAttribPointerARB(attribIndex, vAtb->count, vAtb->type, vAtb->normalized, vAtb->stride, BUFFER_OFFSET(vAtb->offset)); } } RB_EndSurface(); // So we don't lerp surfaces that shouldn't be lerped glState.vertexAnimation = qfalse; } static void RB_SurfaceSkip( void *surf ) { } void (*rb_surfaceTable[SF_NUM_SURFACE_TYPES])( void *) = { (void(*)(void*))RB_SurfaceBad, // SF_BAD, (void(*)(void*))RB_SurfaceSkip, // SF_SKIP, (void(*)(void*))RB_SurfaceFace, // SF_FACE, (void(*)(void*))RB_SurfaceGrid, // SF_GRID, (void(*)(void*))RB_SurfaceTriangles, // SF_TRIANGLES, (void(*)(void*))RB_SurfacePolychain, // SF_POLY, (void(*)(void*))RB_SurfaceMesh, // SF_MDV, (void(*)(void*))RB_MDRSurfaceAnim, // SF_MDR, (void(*)(void*))RB_IQMSurfaceAnim, // SF_IQM, (void(*)(void*))RB_SurfaceFlare, // SF_FLARE, (void(*)(void*))RB_SurfaceEntity, // SF_ENTITY (void(*)(void*))RB_SurfaceVaoMesh, // SF_VAO_MESH, (void(*)(void*))RB_SurfaceVaoMdvMesh, // SF_VAO_MDVMESH };