diff --git a/Setup/WizModernImage-IS.bmp b/Setup/WizModernImage-IS.bmp deleted file mode 100644 index 4ad634d..0000000 Binary files a/Setup/WizModernImage-IS.bmp and /dev/null differ diff --git a/Setup/WizModernSmallImage-IS.bmp b/Setup/WizModernSmallImage-IS.bmp deleted file mode 100644 index abcaa5d..0000000 Binary files a/Setup/WizModernSmallImage-IS.bmp and /dev/null differ diff --git a/Setup/WizardLarge.bmp b/Setup/WizardLarge.bmp new file mode 100644 index 0000000..b4e7195 Binary files /dev/null and b/Setup/WizardLarge.bmp differ diff --git a/Setup/WizardSmall.bmp b/Setup/WizardSmall.bmp new file mode 100644 index 0000000..f894c32 Binary files /dev/null and b/Setup/WizardSmall.bmp differ diff --git a/Setup/disclaimer.txt b/Setup/disclaimer.txt index de8cad0..f02f668 100644 --- a/Setup/disclaimer.txt +++ b/Setup/disclaimer.txt @@ -1,7 +1,3 @@ Disclaimer of warranty: -The software and documentation are provided as is without warranty of any kind. To the maximum extent permitted by applicable law, MaxED further disclaims all warranties, including without limitation any implied warranties of merchantability, fitness for a particular purpose, and noninfringement. - -The entire risk arising out of the use or performance of the software and documentation remains with you. - -To the maximum extent permitted by applicable law, in no event shall MaxED be liable for any consequential, incidental, direct, indirect, special, punitive, or other damages whatsoever (including, without limitation, damages for loss of business profits, business interruption, loss of business information, or other pecuniary loss) arising out of this agreement or the use of or inability to use the product, even if MaxED has been advised of the possibility of such damages. +This software is provided as is without warranty of any kind. Don't expect this software to do anything. If it causes you problems, don't blame us. Peace out. \ No newline at end of file diff --git a/Setup/gzbuilder_setup.iss b/Setup/gzbuilder_setup.iss deleted file mode 100644 index dbfd66d..0000000 --- a/Setup/gzbuilder_setup.iss +++ /dev/null @@ -1,365 +0,0 @@ -; Script generated by the Inno Setup Script Wizard. -; SEE THE DOCUMENTATION FOR DETAILS ON CREATING INNO SETUP SCRIPT FILES! - -[Setup] -AppName=GZDoom Builder -AppVerName=GZDoom Builder 2.4 -AppPublisher=MaxED -AppPublisherURL=http://forum.zdoom.org/memberlist.php?mode=viewprofile&u=7012 -AppSupportURL=http://forum.zdoom.org/viewtopic.php?f=3&t=32392 -AppUpdatesURL=http://devbuilds.drdteam.org/doombuilder2-gzdb/ -DefaultDirName={pf}\GZDoom Builder -DefaultGroupName=GZDoom Builder -AllowNoIcons=true -InfoBeforeFile=..\Setup\disclaimer.txt -OutputDir=..\Release -OutputBaseFilename=GZDoom Builder Setup -Compression=lzma/ultra64 -SolidCompression=true -SourceDir=..\Build -SetupLogging=false -AppMutex=gzdoombuilder -PrivilegesRequired=admin -ShowLanguageDialog=no -LanguageDetectionMethod=none -MinVersion=0,5.01.2600 -UninstallDisplayIcon={app}\Updater.exe -WizardImageFile=..\Setup\WizModernImage-IS.bmp -WizardSmallImageFile=..\Setup\WizModernSmallImage-IS.bmp - -[Languages] -Name: english; MessagesFile: compiler:Default.isl - -[Tasks] -Name: desktopicon; Description: {cm:CreateDesktopIcon}; GroupDescription: {cm:AdditionalIcons}; Flags: unchecked - -[Files] -Source: Setup\dotnetfx35setup.exe; DestDir: {tmp}; Flags: dontcopy -Source: Setup\dxwebsetup.exe; DestDir: {tmp}; Flags: dontcopy -Source: Setup\vcredist_x86.exe; DestDir: {tmp}; Flags: dontcopy -Source: Builder.exe; DestDir: {app}; Flags: ignoreversion -Source: GZBuilder.default.cfg; DestDir: {app}; Flags: ignoreversion -Source: Updater.exe; DestDir: {app}; Flags: ignoreversion -Source: Updater.ini; DestDir: {app}; Flags: ignoreversion -Source: Refmanual.chm; DestDir: {app}; Flags: ignoreversion -Source: DevIL.dll; DestDir: {app}; Flags: ignoreversion -Source: SharpCompress.3.5.dll; DestDir: {app}; Flags: ignoreversion -Source: Scintilla.dll; DestDir: {app}; Flags: ignoreversion -Source: SlimDX.dll; DestDir: {app}; Flags: ignoreversion -Source: GPL.txt; DestDir: {app}; Flags: ignoreversion -Source: Compilers\*; DestDir: {app}\Compilers; Flags: ignoreversion recursesubdirs -Source: Configurations\*; DestDir: {app}\Configurations; Flags: ignoreversion recursesubdirs -Source: Scripting\*; DestDir: {app}\Scripting; Flags: ignoreversion recursesubdirs -Source: Snippets\*; DestDir: {app}\Snippets; Flags: ignoreversion recursesubdirs -; NOTE: Don't use "Flags: ignoreversion" on any shared system files -Source: Plugins\BuilderModes.dll; DestDir: {app}\Plugins; Flags: ignoreversion -Source: Plugins\BuilderEffects.dll; DestDir: {app}\Plugins; Flags: ignoreversion -Source: Plugins\ColorPicker.dll; DestDir: {app}\Plugins; Flags: ignoreversion -Source: Plugins\CommentsPanel.dll; DestDir: {app}\Plugins; Flags: ignoreversion -Source: Plugins\NodesViewer.dll; DestDir: {app}\Plugins; Flags: ignoreversion -Source: Plugins\SoundPropagationMode.dll; DestDir: {app}\Plugins; Flags: ignoreversion -Source: Plugins\StairSectorBuilder.dll; DestDir: {app}\Plugins; Flags: ignoreversion -Source: Plugins\TagExplorer.dll; DestDir: {app}\Plugins; Flags: ignoreversion -Source: Plugins\TagRange.dll; DestDir: {app}\Plugins; Flags: ignoreversion -Source: Plugins\VisplaneExplorer.dll; DestDir: {app}\Plugins; Flags: ignoreversion -Source: Plugins\Loadorder.cfg; DestDir: {app}\Plugins; Flags: ignoreversion onlyifdoesntexist -Source: Sprites\*; DestDir: {app}\Sprites; Flags: ignoreversion recursesubdirs -Source: Textures\*; DestDir: {app}\Textures; Flags: ignoreversion - -[Icons] -Name: {group}\GZDoom Builder; Filename: {app}\Builder.exe -Name: {group}\{cm:UninstallProgram,GZDoom Builder}; Filename: {uninstallexe} -Name: {commondesktop}\GZDoom Builder; Filename: {app}\Builder.exe; Tasks: desktopicon - -[UninstallDelete] -Name: {app}; Type: filesandordirs - -[InstallDelete] -Name: {app}\Builder.pdb; Type: files -Name: {app}\Builder.xml; Type: files - -[Registry] -Root: HKLM; Subkey: SOFTWARE\MaxED\GZDoom Builder\; ValueType: string; ValueName: Location; ValueData: {app}; Flags: uninsdeletevalue - -[Messages] -ReadyLabel2a=Continue to begin with the installation, or click Back if you want to review or change any settings. - -[Code] -// Global variables -var - page_info_net: TOutputMsgWizardPage; - page_info_netfailed: TOutputMsgWizardPage; - page_setup_net: TOutputProgressWizardPage; - page_info_dx: TOutputMsgWizardPage; - page_info_dxfailed: TOutputMsgWizardPage; - page_setup_dx: TOutputProgressWizardPage; - page_info_vc: TOutputMsgWizardPage; - page_info_vcfailed: TOutputMsgWizardPage; - page_setup_vc: TOutputProgressWizardPage; - restartneeded: Boolean; - netinstallfailed: Boolean; - netisinstalled: Boolean; - dxinstallfailed: Boolean; - dxisinstalled: Boolean; - vcinstallfailed: Boolean; - vcisinstalled: Boolean; - -// Prerequisites checks -function CheckNetIsInstalled(): Boolean; -begin - Result := RegKeyExists(HKLM, 'SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5') or - RegKeyExists(HKLM, 'SOFTWARE\Wow6432Node\Microsoft\NET Framework Setup\NDP\v3.5'); -end; - -function CheckDXVersion(): Boolean; -var - MajorVer, MinorVer: Integer; - StartPos: Integer; - TempStr, VerStr: string; - HasRequiredDll : Boolean; -begin - if (RegQueryStringValue(HKEY_LOCAL_MACHINE, 'SOFTWARE\Microsoft\DirectX', 'Version', VerStr)) then begin - (* Extract major version *) - StartPos := Pos('.', VerStr); - MajorVer := StrToInt(Copy(VerStr, 1, StartPos - 1)); - (* Remove major version and decimal point that follows *) - TempStr := Copy(VerStr, StartPos + 1, MaxInt); - (* Find next decimal point *) - StartPos := Pos('.', TempStr); - (* Extract minor version *) - MinorVer := StrToInt(Copy(TempStr, 1, StartPos - 1)); - - //mxd. The DX version alone is not accurate enough... - HasRequiredDll := FileExists(ExpandConstant('{syswow64}\d3dx9_43.dll')); - - Result := ((MajorVer > 4) or ((MajorVer = 4) and (MinorVer >= 9))) and HasRequiredDll; - end - else begin - Result := false; - end; -end; - -function CheckVCIsInstalled(): Boolean; -begin - //mxd. Any VC++ 2008 package will do, I assume... - //mxd. Registry values gartered from http://blogs.msdn.com/b/astebner/archive/2009/01/29/9384143.aspx - Result := RegKeyExists(HKLM, 'SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{1F1C2DFC-2D24-3E06-BCB8-725134ADF989}') or - RegKeyExists(HKLM, 'SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{9A25302D-30C0-39D9-BD6F-21E6EC160475}') or - RegKeyExists(HKLM, 'SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{FF66E9F6-83E7-3A3E-AF14-8DE9A809A6A4}'); -end; - -// When the wizard initializes -procedure InitializeWizard(); -begin - restartneeded := false; - netinstallfailed := false; - netisinstalled := CheckNetIsInstalled(); - dxinstallfailed := false; - dxisinstalled := CheckDXVersion(); - vcinstallfailed := false; - vcisinstalled := CheckVCIsInstalled(); - - // Create .NET Framework pages - page_info_net := CreateOutputMsgPage(wpPreparing, - 'Installing Microsoft .NET Framework 3.5', '', - 'Setup has detected that your system is missing the required version of the Microsoft .NET Framework. ' + - 'Setup will now install or update your Microsoft .NET Framework. This may take several minutes to complete.' + #10 + #10 + - 'WARNING: The installer will download the Microsoft .NET Framework from the internet, but the progress bar will not ' + - 'go forward until the download is complete. You may send Microsoft an angry letter about that.' + #10 + #10 + - 'Click Install to begin.'); - - page_info_netfailed := CreateOutputMsgPage(page_info_net.ID, - 'Installing Microsoft .NET Framework 3.5', '', - 'Setup could not install the Microsoft .NET Framework 3.5.' + #10 + #10 + - 'Click Back to try again, or Cancel to exit Setup.'); - - page_setup_net := CreateOutputProgressPage('Installing Microsoft .NET Framework 3.5', 'Setup is installing Microsoft .NET Framework 3.5, please wait...'); - - // Create DirectX pages - page_info_dx := CreateOutputMsgPage(wpPreparing, - 'Installing DirectX 9.0', '', - 'Setup has detected that your system is missing the required version of the DirectX. ' + - 'Setup will now install or update your DirectX. This may take several minutes to complete.' + #10 + #10 + - 'WARNING: The installer will download DirectX from the internet, but the progress bar will not ' + - 'go forward until the download is complete. You may send Microsoft an angry letter about that.' + #10 + #10 + - 'Click Install to begin.'); - - page_info_dxfailed := CreateOutputMsgPage(page_info_net.ID, - 'Installing DirectX 9.0', '', - 'Setup could not install DirectX 9.0.' + #10 + #10 + - 'Click Back to try again, or Cancel to exit Setup.'); - - page_setup_dx := CreateOutputProgressPage('Installing DirectX 9.0', 'Setup is installing DirectX 9.0, please wait...'); - - // Create VC++ 2008 pages - page_info_vc := CreateOutputMsgPage(wpPreparing, - 'Installing Visual C++ 2008 SP1 ATL Security Update', '', - 'Setup has detected that your system is missing the required version of the Visual C++ Runtime. ' + - 'Setup will now install or update your Visual C++ Runtime. This may take several minutes to complete.' + #10 + #10 + - 'Click Install to begin.'); - - page_info_vcfailed := CreateOutputMsgPage(page_info_net.ID, - 'Installing Visual C++ 2008 SP1 ATL Security Update', '', - 'Setup could not install Visual C++ 2008 SP1 ATL Security Update.' + #10 + #10 + - 'Click Back to try again, or Cancel to exit Setup.'); - - page_setup_vc := CreateOutputProgressPage('Installing Visual C++ 2008 SP1 ATL Security Update', 'Setup is installing Visual C++ 2008 SP1 ATL Security Update, please wait...'); -end; - -// This is called to check if a page must be skipped -function ShouldSkipPage(PageID: Integer): Boolean; -begin - if(PageID = page_info_net.ID) then // Skip .NET pages? - Result := netisinstalled - else if(PageID = page_info_netfailed.ID) then - Result := (not netinstallfailed) and netisinstalled - else if(PageID = page_info_dx.ID) then // Skip DX pages? - Result := dxisinstalled - else if(PageID = page_info_dxfailed.ID) then - Result := (not dxinstallfailed) and dxisinstalled - else if(PageID = page_info_vc.ID) then // Skip VC++ pages? - Result := vcisinstalled - else if(PageID = page_info_vcfailed.ID) then - Result := (not vcinstallfailed) and vcisinstalled - else - Result := false; -end; - -// This is called to determine if we need to restart -function NeedRestart(): Boolean; -begin - Result := restartneeded; -end; - -// This is called when the current page changes -procedure CurPageChanged(CurPageID: Integer); -begin - if(CurPageID = wpReady) then begin - if(netisinstalled = false) or (dxisinstalled = false) or (vcisinstalled = false) then - WizardForm.NextButton.Caption := 'Next'; - end - else if(CurPageID = page_info_net.ID) or (CurPageID = page_info_dx.ID) or (CurPageID = page_info_vc.ID) then begin - WizardForm.NextButton.Caption := 'Install'; - end - else if(CurPageID = page_info_netfailed.ID) or (CurPageID = page_info_dxfailed.ID) or (CurPageID = page_info_vcfailed.ID) then begin - WizardForm.NextButton.Visible := true; - WizardForm.NextButton.Enabled := false; - WizardForm.BackButton.Visible := true; - WizardForm.BackButton.Enabled := true; - WizardForm.CancelButton.Visible := true; - WizardForm.CancelButton.Enabled := true; - end; -end; - -// This is called when the Next button is clicked -function NextButtonClick(CurPage: Integer): Boolean; -var - errorcode: Integer; - tempfile: String; -begin - - // Next pressed on .NET info page? - if(CurPage = page_info_net.ID) then begin - // Show progress page and run setup - page_setup_net.Show; - try - begin - netinstallfailed := false; - ExtractTemporaryFile('dotnetfx35setup.exe'); - // We copy the file to the real temp directory so that it isn't removed when Setup is closed. - // Judging from the return codes, this installer may want to run again after a reboot. - // See the return codes here: http://msdn.microsoft.com/en-us/library/cc160716.aspx - tempfile := RemoveBackslash(GetTempDir()) + '\dotnetfx35setup.exe'; - FileCopy(ExpandConstant('{tmp}\dotnetfx35setup.exe'), tempfile, false); - Exec(tempfile, '/qb /norestart', '', SW_SHOW, ewWaitUntilTerminated, errorcode); - - if((errorcode = 1641) or (errorcode = 3010)) then begin - // Success, but restart needed! - restartneeded := true; - end - else if(errorcode <> 0) then begin - netinstallfailed := true; - end; - - netisinstalled := CheckNetIsInstalled(); - end - finally - page_setup_net.Hide; - end; - end - // Next pressed on DX info page? - else if(CurPage = page_info_dx.ID) then begin - // Show progress page and run setup - page_setup_dx.Show; - try - begin - dxinstallfailed := false; - ExtractTemporaryFile('dxwebsetup.exe'); - // We copy the file to the real temp directory so that it isn't removed when Setup is closed. - // Judging from the return codes, this installer may want to run again after a reboot. - // See the return codes here: http://support.microsoft.com/kb/177430 - tempfile := RemoveBackslash(GetTempDir()) + '\dxwebsetup.exe'; - FileCopy(ExpandConstant('{tmp}\dxwebsetup.exe'), tempfile, false); - Exec(tempfile, '/Q', '', SW_SHOW, ewWaitUntilTerminated, errorcode); - - if(errorcode = 1) then begin - // Success, but restart needed! - restartneeded := true; - end - else if(errorcode <> 0) then begin - dxinstallfailed := true; - end; - - dxisinstalled := CheckDXVersion(); - end - finally - page_setup_dx.Hide; - end; - end - // Next pressed on VC info page? - else if(CurPage = page_info_vc.ID) then begin - // Show progress page and run setup - page_setup_vc.Show; - try - begin - vcinstallfailed := false; - ExtractTemporaryFile('vcredist_x86.exe'); - // We copy the file to the real temp directory so that it isn't removed when Setup is closed. - // Judging from the return codes, this installer may want to run again after a reboot. - // See the return codes here: http://blogs.msdn.com/b/astebner/archive/2010/10/20/10078468.aspx - tempfile := RemoveBackslash(GetTempDir()) + '\vcredist_x86.exe'; - FileCopy(ExpandConstant('{tmp}\vcredist_x86.exe'), tempfile, false); - Exec(tempfile, '/q /norestart', '', SW_SHOW, ewWaitUntilTerminated, errorcode); - - if(errorcode = 3010) then begin - // Success, but restart needed! - restartneeded := true; - end - else if(errorcode <> 0) then begin - vcinstallfailed := true; - end; - - vcisinstalled := CheckVCIsInstalled(); - end - finally - page_setup_vc.Hide; - end; - end; - - Result := True; -end; - -//Remove configs? -procedure DeinitializeUninstall(); -begin - if MsgBox('Delete map restore data and program configuration files?', mbConfirmation, MB_YESNO) = IDYES then - begin - // Remove restore data - DelTree(ExpandConstant('{localappdata}\Doom Builder\Restore'), True, True, True); - - // Remove configs - DeleteFile(ExpandConstant('{localappdata}\Doom Builder\GZBuilder.cfg')); - DeleteFile(ExpandConstant('{localappdata}\Doom Builder\GZBuilder.log')); - DeleteFile(ExpandConstant('{localappdata}\Doom Builder\GZCrash.txt')); - end; -end; \ No newline at end of file diff --git a/Setup/zonebuilder_setup.iss b/Setup/zonebuilder_setup.iss index 5d8b943..790fcc0 100644 --- a/Setup/zonebuilder_setup.iss +++ b/Setup/zonebuilder_setup.iss @@ -24,8 +24,8 @@ ShowLanguageDialog=no LanguageDetectionMethod=none MinVersion=0,5.01.2600 UninstallDisplayIcon={app}\Updater.exe -WizardImageFile=..\Setup\WizModernImage-IS.bmp -WizardSmallImageFile=..\Setup\WizModernSmallImage-IS.bmp +WizardImageFile=..\Setup\WizardLarge.bmp +WizardSmallImageFile=..\Setup\WizardSmall.bmp [Languages] Name: english; MessagesFile: compiler:Default.isl