#region ================== Copyright (c) 2007 Pascal vd Heiden

/*
 * Copyright (c) 2007 Pascal vd Heiden, www.codeimp.com
 * This program is released under GNU General Public License
 * 
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 * 
 */

#endregion

#region ================== Namespaces

using System;
using System.Collections.Generic;
using System.Windows.Forms;
using CodeImp.DoomBuilder.Windows;
using CodeImp.DoomBuilder.Map;
using CodeImp.DoomBuilder.Rendering;
using CodeImp.DoomBuilder.Geometry;
using CodeImp.DoomBuilder.Editing;
using CodeImp.DoomBuilder.Actions;
using CodeImp.DoomBuilder.VisualModes;
using CodeImp.DoomBuilder.Config;
using CodeImp.DoomBuilder.GZBuilder.Data;
using CodeImp.DoomBuilder.Types;
using CodeImp.DoomBuilder.Data;
using CodeImp.DoomBuilder.GZBuilder.Tools;

#endregion

namespace CodeImp.DoomBuilder.BuilderModes
{
	[EditMode(DisplayName = "GZDB Visual Mode",
			  SwitchAction = "gzdbvisualmode", // Action name used to switch to this mode
			  ButtonImage = "VisualModeGZ.png",	// Image resource name for the button
			  ButtonOrder = 1,					// Position of the button (lower is more to the left)
			  ButtonGroup = "001_visual",
			  UseByDefault = true)]

	public class BaseVisualMode : VisualMode
	{
		#region ================== Constants
		// Object picking
		private const float PICK_INTERVAL = 80.0f;
		private const float PICK_RANGE = 0.98f;

		// Gravity
		private const float GRAVITY = -0.06f;
		
		#endregion
		
		#region ================== Variables

		// Gravity
		private Vector3D gravity;
		private float cameraflooroffset = 41f;		// same as in doom
		private float cameraceilingoffset = 10f;
		
		// Object picking
		private VisualPickResult target;
		private float lastpicktime;
		private bool locktarget;
		private bool useSelectionFromClassicMode;//mxd

		// This keeps extra element info
		private Dictionary<Sector, SectorData> sectordata;
		private Dictionary<Thing, ThingData> thingdata;
		private Dictionary<Vertex, VertexData> vertexdata; //mxd
		//private Dictionary<Thing, EffectDynamicLight> lightdata; //mxd
		
		// This is true when a selection was made because the action is performed
		// on an object that was not selected. In this case the previous selection
		// is cleared and the targeted object is temporarely selected to perform
		// the action on. After the action is completed, the object is deselected.
		private bool singleselection;
		
		// We keep these to determine if we need to make a new undo level
		private bool selectionchanged;
		private int lastundogroup;
		private VisualActionResult actionresult;
		private bool undocreated;

		// List of selected objects when an action is performed
		private List<IVisualEventReceiver> selectedobjects;
		//mxd. Used in Cut/PasteSelection actions
		private List<ThingCopyData> copyBuffer;
		private Type lasthighlighttype; //mxd

		private static bool gzdoomRenderingEffects = true; //mxd

		//mxd. Moved here from Tools
		private struct SidedefAlignJob
		{
			public Sidedef sidedef;

			public float offsetx;
			public float scaleY; //mxd

			private Sidedef controlside; //mxd
			public Sidedef controlSide { //mxd
				get
				{
					return controlside;
				}
				set
				{
					controlside = value;
					ceilingheight = (controlside.Index != sidedef.Index && controlside.Line.Args[1] == 0 ? controlside.Sector.FloorHeight : controlside.Sector.CeilHeight);
				}
			}

			private int ceilingheight; //mxd
			public int ceilingHeight { get { return ceilingheight; } } //mxd

			// When this is true, the previous sidedef was on the left of
			// this one and the texture X offset of this sidedef can be set
			// directly. When this is false, the length of this sidedef
			// must be subtracted from the X offset first.
			public bool forward;
		}
		
		#endregion
		
		#region ================== Properties

		public override object HighlightedObject
		{
			get
			{
				// Geometry picked?
				if(target.picked is VisualGeometry)
				{
					VisualGeometry pickedgeo = (target.picked as VisualGeometry);

					if(pickedgeo.Sidedef != null)
						return pickedgeo.Sidedef;
					else if(pickedgeo.Sector != null)
						return pickedgeo.Sector;
					else
						return null;
				}
				// Thing picked?
				else if(target.picked is VisualThing)
				{
					VisualThing pickedthing = (target.picked as VisualThing);
					return pickedthing.Thing;
				}
				else
				{
					return null;
				}
			}
		}

		public object HighlightedTarget { get { return target.picked; } } //mxd
		public static bool GZDoomRenderingEffects { get { return gzdoomRenderingEffects; } } //mxd
		public bool UseSelectionFromClassicMode { get { return useSelectionFromClassicMode; } } //mxd

		new public IRenderer3D Renderer { get { return renderer; } }
		
		public bool IsSingleSelection { get { return singleselection; } }
		public bool SelectionChanged { get { return selectionchanged; } set { selectionchanged |= value; } }

		#endregion
		
		#region ================== Constructor / Disposer

		// Constructor
		public BaseVisualMode()
		{
			// Initialize
			this.gravity = new Vector3D(0.0f, 0.0f, 0.0f);
			this.selectedobjects = new List<IVisualEventReceiver>();
			//mxd
			this.copyBuffer = new List<ThingCopyData>();
			
			// We have no destructor
			GC.SuppressFinalize(this);
		}

		// Disposer
		public override void Dispose()
		{
			// Not already disposed?
			if(!isdisposed)
			{
				// Clean up
				
				// Done
				base.Dispose();
			}
		}

		#endregion
		
		#region ================== Methods

		// This calculates brightness level
		internal int CalculateBrightness(int level)
		{
			return renderer.CalculateBrightness(level);
		}

		//mxd. This calculates brightness level with doom-style shading
		internal int CalculateBrightness(int level, Sidedef sd) {
			return renderer.CalculateBrightness(level, sd);
		}
		
		// This adds a selected object
		internal void AddSelectedObject(IVisualEventReceiver obj)
		{
			selectedobjects.Add(obj);
			selectionchanged = true;
		}
		
		// This removes a selected object
		internal void RemoveSelectedObject(IVisualEventReceiver obj)
		{
			selectedobjects.Remove(obj);
			selectionchanged = true;
		}
		
		// This is called before an action is performed
		public void PreAction(int multiselectionundogroup)
		{
			actionresult = new VisualActionResult();
			
			PickTargetUnlocked();
			
			// If the action is not performed on a selected object, clear the
			// current selection and make a temporary selection for the target.
			if((target.picked != null) && !target.picked.Selected && (BuilderPlug.Me.VisualModeClearSelection || (selectedobjects.Count == 0)))
			{
				// Single object, no selection
				singleselection = true;
				ClearSelection();
				undocreated = false;
			}
			else
			{
				singleselection = false;
				
				// Check if we should make a new undo level
				// We don't want to do this if this is the same action with the same
				// selection and the action wants to group the undo levels
				if((lastundogroup != multiselectionundogroup) || (lastundogroup == UndoGroup.None) ||
				   (multiselectionundogroup == UndoGroup.None) || selectionchanged)
				{
					// We want to create a new undo level, but not just yet
					lastundogroup = multiselectionundogroup;
					undocreated = false;
				}
				else
				{
					// We don't want to make a new undo level (changes will be combined)
					undocreated = true;
				}
			}
		}

		// Called before an action is performed. This does not make an undo level
		private void PreActionNoChange()
		{
			actionresult = new VisualActionResult();
			singleselection = false;
			undocreated = false;
		}
		
		// This is called after an action is performed
		private void PostAction()
		{
			if(!string.IsNullOrEmpty(actionresult.displaystatus))
				General.Interface.DisplayStatus(StatusType.Action, actionresult.displaystatus);

			// Reset changed flags
			foreach(KeyValuePair<Sector, VisualSector> vs in allsectors)
			{
				BaseVisualSector bvs = (vs.Value as BaseVisualSector);
				foreach(VisualFloor vf in bvs.ExtraFloors) vf.Changed = false;
				foreach(VisualCeiling vc in bvs.ExtraCeilings) vc.Changed = false;
				foreach(VisualFloor vf in bvs.ExtraBackFloors) vf.Changed = false; //mxd
				foreach(VisualCeiling vc in bvs.ExtraBackCeilings) vc.Changed = false; //mxd
				bvs.Floor.Changed = false;
				bvs.Ceiling.Changed = false;
			}
			
			selectionchanged = false;
			
			if(singleselection)
				ClearSelection();
			
			UpdateChangedObjects();
			ShowTargetInfo();
		}
		
		// This sets the result for an action
		public void SetActionResult(VisualActionResult result)
		{
			actionresult = result;
		}

		// This sets the result for an action
		public void SetActionResult(string displaystatus)
		{
			actionresult = new VisualActionResult {displaystatus = displaystatus};
		}
		
		// This creates an undo, when only a single selection is made
		// When a multi-selection is made, the undo is created by the PreAction function
		public int CreateUndo(string description, int group, int grouptag)
		{
			if(!undocreated)
			{
				undocreated = true;

				if(singleselection)
					return General.Map.UndoRedo.CreateUndo(description, this, group, grouptag);
				return General.Map.UndoRedo.CreateUndo(description, this, UndoGroup.None, 0);
			}

			return 0;
		}

		// This creates an undo, when only a single selection is made
		// When a multi-selection is made, the undo is created by the PreAction function
		public int CreateUndo(string description)
		{
			return CreateUndo(description, UndoGroup.None, 0);
		}

		// This makes a list of the selected object
		private void RebuildSelectedObjectsList()
		{
			// Make list of selected objects
			selectedobjects = new List<IVisualEventReceiver>();
			foreach(KeyValuePair<Sector, VisualSector> vs in allsectors)
			{
				if(vs.Value != null)
				{
					BaseVisualSector bvs = vs.Value as BaseVisualSector;
					if((bvs.Floor != null) && bvs.Floor.Selected) selectedobjects.Add(bvs.Floor);
					if((bvs.Ceiling != null) && bvs.Ceiling.Selected) selectedobjects.Add(bvs.Ceiling);
					foreach(Sidedef sd in vs.Key.Sidedefs)
					{
						List<VisualGeometry> sidedefgeos = bvs.GetSidedefGeometry(sd);
						foreach(VisualGeometry sdg in sidedefgeos)
						{
							if(sdg.Selected) selectedobjects.Add((sdg as IVisualEventReceiver));
						}
					}
				}
			}

			foreach(KeyValuePair<Thing, VisualThing> vt in allthings)
			{
				if(vt.Value != null)
				{
					BaseVisualThing bvt = vt.Value as BaseVisualThing;
					if(bvt.Selected) selectedobjects.Add(bvt);
				}
			}

			//mxd
			if(General.Map.UDMF && General.Settings.GZShowVisualVertices) {
				foreach(KeyValuePair<Vertex, VisualVertexPair> pair in vertices) {
					if(pair.Value.CeilingVertex.Selected)
						selectedobjects.Add((BaseVisualVertex)pair.Value.CeilingVertex);
					if(pair.Value.FloorVertex.Selected)
						selectedobjects.Add((BaseVisualVertex)pair.Value.FloorVertex);
				}
			}
		}

		//mxd. Need this to apply changes to 3d-floor even if control sector doesn't exist as BaseVisualSector
		internal BaseVisualSector CreateBaseVisualSector(Sector s) {
			BaseVisualSector vs = new BaseVisualSector(this, s);
			if(vs != null) allsectors.Add(s, vs);
			return vs;
		}

		// This creates a visual sector
		protected override VisualSector CreateVisualSector(Sector s)
		{
			BaseVisualSector vs = new BaseVisualSector(this, s);
			if (vs != null) allsectors.Add(s, vs); //mxd
			return vs;
		}
		
		// This creates a visual thing
		protected override VisualThing CreateVisualThing(Thing t)
		{
			BaseVisualThing vt = new BaseVisualThing(this, t);
			return vt.Setup() ? vt : null;
		}

		// This locks the target so that it isn't changed until unlocked
		public void LockTarget()
		{
			locktarget = true;
		}
		
		// This unlocks the target so that is changes to the aimed geometry again
		public void UnlockTarget()
		{
			locktarget = false;
		}
		
		// This picks a new target, if not locked
		private void PickTargetUnlocked()
		{
			if(!locktarget) PickTarget();
		}
		
		// This picks a new target
		private void PickTarget()
		{
			// Find the object we are aiming at
			Vector3D start = General.Map.VisualCamera.Position;
			Vector3D delta = General.Map.VisualCamera.Target - General.Map.VisualCamera.Position;
			delta = delta.GetFixedLength(General.Settings.ViewDistance * PICK_RANGE);
			VisualPickResult newtarget = PickObject(start, start + delta);
			
			// Should we update the info on panels?
			bool updateinfo = (newtarget.picked != target.picked);
			
			// Apply new target
			target = newtarget;

			// Show target info
			if(updateinfo) ShowTargetInfo();
		}

		// This shows the picked target information
		public void ShowTargetInfo()
		{
			// Any result?
			if(target.picked != null)
			{
				// Geometry picked?
				if(target.picked is VisualGeometry)
				{
					VisualGeometry pickedgeo = (target.picked as VisualGeometry);
					
					// Sidedef?
					if(pickedgeo is BaseVisualGeometrySidedef)
					{
						BaseVisualGeometrySidedef pickedsidedef = (pickedgeo as BaseVisualGeometrySidedef);
						General.Interface.ShowLinedefInfo(pickedsidedef.GetControlLinedef()); //mxd
					}
					// Sector?
					else if(pickedgeo is BaseVisualGeometrySector)
					{
						BaseVisualGeometrySector pickedsector = (pickedgeo as BaseVisualGeometrySector);
						General.Interface.ShowSectorInfo(pickedsector.Level.sector);
					}
					else
					{
						General.Interface.HideInfo();
					}
				} 
				else if(target.picked is VisualThing) 
				{ // Thing picked?
					VisualThing pickedthing = (target.picked as VisualThing);
					General.Interface.ShowThingInfo(pickedthing.Thing);
				} 
				else if(target.picked is VisualVertex) //mxd
				{
					VisualVertex pickedvert = (target.picked as VisualVertex);
					General.Interface.ShowVertexInfo(pickedvert.Vertex);
				}
			}
			else
			{
				General.Interface.HideInfo();
			}
		}
		
		// This updates the VisualSectors and VisualThings that have their Changed property set
		private void UpdateChangedObjects()
		{
			foreach(KeyValuePair<Sector, VisualSector> vs in allsectors)
			{
				if(vs.Value != null)
				{
					BaseVisualSector bvs = vs.Value as BaseVisualSector;
					if(bvs.Changed) bvs.Rebuild();
				}
			}

			foreach(KeyValuePair<Thing, VisualThing> vt in allthings)
			{
				if(vt.Value != null)
				{
					BaseVisualThing bvt = vt.Value as BaseVisualThing;
					if(bvt.Changed) bvt.Rebuild();
				}
			}

			//mxd
			if(General.Map.UDMF) 
			{
				foreach(KeyValuePair<Vertex, VisualVertexPair> pair in vertices)
					pair.Value.Update();
			}
		}

		//mxd
		protected override void moveSelectedThings(Vector2D direction, bool absolutePosition) {
			List<VisualThing> visualThings = GetSelectedVisualThings(true);
			if (visualThings.Count == 0) return;

			PreAction(UndoGroup.ThingMove);

			Vector3D[] coords = new Vector3D[visualThings.Count];
			for (int i = 0; i < visualThings.Count; i++)
				coords[i] = visualThings[i].Thing.Position;

			//move things...
			Vector3D[] translatedCoords = translateCoordinates(coords, direction, absolutePosition);
			for (int i = 0; i < visualThings.Count; i++) {
				BaseVisualThing t = visualThings[i] as BaseVisualThing;
				t.OnMove(translatedCoords[i]);
			}

			PostAction();
		}

		//mxd
		private static Vector3D[] translateCoordinates(Vector3D[] coordinates, Vector2D direction, bool absolutePosition) 
		{
			if (coordinates.Length == 0) return null;

			direction.x = (float)Math.Round(direction.x);
			direction.y = (float)Math.Round(direction.y);

			Vector3D[] translatedCoords = new Vector3D[coordinates.Length];

			//move things...
			if (!absolutePosition) { //...relatively (that's easy)
				int camAngle = (int)Math.Round(Angle2D.RadToDeg(General.Map.VisualCamera.AngleXY));
				int sector = General.ClampAngle(camAngle - 45) / 90;
				direction = direction.GetRotated(sector * Angle2D.PIHALF);

				for (int i = 0; i < coordinates.Length; i++)
					translatedCoords[i] = coordinates[i] + new Vector3D(direction);

				return translatedCoords;
			}

			//...to specified location preserving relative positioning (that's harder)
			if (coordinates.Length == 1) {//just move it there
				translatedCoords[0] = new Vector3D(direction.x, direction.y, coordinates[0].z);
				return translatedCoords;
			}

			//we need some reference
			float minX = coordinates[0].x;
			float maxX = minX;
			float minY = coordinates[0].y;
			float maxY = minY;

			//get bounding coordinates for selected things
			for (int i = 1; i < coordinates.Length; i++) {
				if (coordinates[i].x < minX)
					minX = coordinates[i].x;
				else if (coordinates[i].x > maxX)
					maxX = coordinates[i].x;

				if (coordinates[i].y < minY)
					minY = coordinates[i].y;
				else if (coordinates[i].y > maxY)
					maxY = coordinates[i].y;
			}

			Vector2D selectionCenter = new Vector2D(minX + (maxX - minX) / 2, minY + (maxY - minY) / 2);

			//move them
			for (int i = 0; i < coordinates.Length; i++)
				translatedCoords[i] = new Vector3D((float)Math.Round(direction.x - (selectionCenter.x - coordinates[i].x)), (float)Math.Round(direction.y - (selectionCenter.y - coordinates[i].y)), (float)Math.Round(coordinates[i].z));

			return translatedCoords;
		}

		//mxd
		internal void SelectSideParts(Sidedef side, bool toggleTop, bool toggleMid, bool toggleBottom, bool select, bool withSameTexture, bool withSameHeight) {
			BaseVisualSector vs = GetVisualSector(side.Sector) as BaseVisualSector;
			
			if(toggleTop && vs.Sides[side].upper != null &&
				((select && !vs.Sides[side].upper.Selected) || (!select && vs.Sides[side].upper.Selected))) {
				vs.Sides[side].upper.SelectNeighbours(select, withSameTexture, withSameHeight);
			}

			if(toggleMid && vs.Sides[side].middlesingle != null &&
				((select && !vs.Sides[side].middlesingle.Selected) || (!select && vs.Sides[side].middlesingle.Selected))) {
				vs.Sides[side].middlesingle.SelectNeighbours(select, withSameTexture, withSameHeight);
			}

			if(toggleMid && vs.Sides[side].middledouble != null &&
				((select && !vs.Sides[side].middledouble.Selected) || (!select && vs.Sides[side].middledouble.Selected))) {
				vs.Sides[side].middledouble.SelectNeighbours(select, withSameTexture, withSameHeight);
			}

			if(toggleBottom && vs.Sides[side].lower != null &&
				((select && !vs.Sides[side].lower.Selected) || (!select && vs.Sides[side].lower.Selected))) {
				vs.Sides[side].lower.SelectNeighbours(select, withSameTexture, withSameHeight);
			}
		}

		//mxd
		private void updateSelectionInfo() {
			int numWalls = 0;
			int numFloors = 0;
			int numCeilings = 0;
			int numThings = 0;
			int numVerts = 0;

			foreach(IVisualEventReceiver obj in selectedobjects) {
				if(!obj.IsSelected()) continue;

				if(obj is BaseVisualThing) numThings++;
				else if(obj is BaseVisualVertex) numVerts++;
				else if(obj is VisualCeiling) numCeilings++;
				else if(obj is VisualFloor)	numFloors++;
				else if(obj is VisualMiddleSingle || obj is VisualMiddleDouble || obj is VisualLower || obj is VisualUpper || obj is VisualMiddle3D || obj is VisualMiddleBack)
					numWalls++;
			}

			List<string> results = new List<string>();
			if (numWalls > 0) results.Add(numWalls + (numWalls > 1 ? " sidedefs" : " sidedef"));
			if (numFloors > 0) results.Add(numFloors + (numFloors > 1 ? " floors" : " floor"));
			if (numCeilings > 0) results.Add(numCeilings + (numCeilings > 1 ? " ceilings" : " ceiling"));
			if (numThings > 0) results.Add(numThings + (numThings > 1 ? " things" : " thing"));
			if (numVerts > 0) results.Add(numVerts + (numVerts > 1 ? " vertices" : " vertex"));

			if (results.Count == 0) {
				General.Interface.DisplayStatus(StatusType.Selection, string.Empty);
			} else {
				string result = string.Join(", ", results.ToArray());
				int pos = result.LastIndexOf(",");
				if(pos != -1) result = result.Remove(pos, 1).Insert(pos, " and");
				General.Interface.DisplayStatus(StatusType.Selection, result + " selected");
			}
		}

		//mxd
		internal void StartRealtimeInterfaceUpdate(SelectionType selectionType) {
			if (selectionType == SelectionType.Sectors || selectionType == SelectionType.Linedefs || selectionType == SelectionType.All) {
				General.Interface.OnEditFormValuesChanged += Interface_OnSectorEditFormValuesChanged;
			} else if(selectionType == SelectionType.Things) {
				General.Interface.OnEditFormValuesChanged += Interface_OnThingEditFormValuesChanged;
			} else {
				General.Interface.OnEditFormValuesChanged += Interface_OnEditFormValuesChanged;
			}
		}

		//mxd
		internal void StopRealtimeInterfaceUpdate(SelectionType selectionType) {
			if(selectionType == SelectionType.Sectors || selectionType == SelectionType.Linedefs || selectionType == SelectionType.All) {
				General.Interface.OnEditFormValuesChanged -= Interface_OnSectorEditFormValuesChanged;
			} else if(selectionType == SelectionType.Things) {
				General.Interface.OnEditFormValuesChanged -= Interface_OnThingEditFormValuesChanged;
			} else {
				General.Interface.OnEditFormValuesChanged -= Interface_OnEditFormValuesChanged;
			}
		}
		
		#endregion

		#region ================== Extended Methods

		// This requests a sector's extra data
		internal SectorData GetSectorData(Sector s)
		{
			// Make fresh sector data when it doesn't exist yet
			if(!sectordata.ContainsKey(s))
				sectordata[s] = new SectorData(this, s);
			
			return sectordata[s];
		}
		
		// This requests a things's extra data
		internal ThingData GetThingData(Thing t)
		{
			// Make fresh sector data when it doesn't exist yet
			if(!thingdata.ContainsKey(t))
				thingdata[t] = new ThingData(this, t);
			
			return thingdata[t];
		}

		//mxd
		internal VertexData GetVertexData(Vertex v) {
			if(!vertexdata.ContainsKey(v))
				vertexdata[v] = new VertexData(this, v);
			return vertexdata[v];
		}

		internal BaseVisualVertex GetVisualVertex(Vertex v, bool floor) {
			if(!vertices.ContainsKey(v))
				vertices.Add(v, new VisualVertexPair(new BaseVisualVertex(this, v, false), new BaseVisualVertex(this, v, true)));

			return (floor ? vertices[v].FloorVertex as BaseVisualVertex : vertices[v].CeilingVertex as BaseVisualVertex);
		}

		//mxd
		internal void UpdateVertexHandle(Vertex v) {
			if(!vertices.ContainsKey(v))
				vertices.Add(v, new VisualVertexPair(new BaseVisualVertex(this, v, false), new BaseVisualVertex(this, v, true)));
			else
				vertices[v].Changed = true;
		}
		
		// This rebuilds the sector data
		// This requires that the blockmap is up-to-date!
		internal void RebuildElementData()
		{
			//mxd
			Sector[] sectorsWithEffects = null;

			if (!gzdoomRenderingEffects) {

				//store all sectors with effects
				if(sectordata != null && sectordata.Count > 0) {
					sectorsWithEffects = new Sector[sectordata.Count];
					sectordata.Keys.CopyTo(sectorsWithEffects, 0);
				}

				//remove all vertex handles from selection
				if(vertices != null && vertices.Count > 0) {
					foreach(IVisualEventReceiver i in selectedobjects){
						if(i is BaseVisualVertex) RemoveSelectedObject(i);
					}
				}
			}

			Dictionary<int, List<Sector>> sectortags = new Dictionary<int, List<Sector>>();
			sectordata = new Dictionary<Sector, SectorData>(General.Map.Map.Sectors.Count);
			thingdata = new Dictionary<Thing, ThingData>(General.Map.Map.Things.Count);

			//mxd. rebuild all sectors with effects
			if(sectorsWithEffects != null) {
				for(int i = 0; i < sectorsWithEffects.Length; i++) {
					// The visual sector associated is now outdated
					if(VisualSectorExists(sectorsWithEffects[i])) {
						BaseVisualSector vs = GetVisualSector(sectorsWithEffects[i]) as BaseVisualSector;
						vs.UpdateSectorGeometry(true);
					}
				}
			}

			if(General.Map.UDMF) {
				vertexdata = new Dictionary<Vertex, VertexData>(General.Map.Map.Vertices.Count); //mxd
				vertices.Clear();
			}

			if (!gzdoomRenderingEffects) return; //mxd
			
			// Find all sector who's tag is not 0 and hash them so that we can find them quicly
			foreach(Sector s in General.Map.Map.Sectors)
			{
				if(s.Tag != 0)
				{
					if(!sectortags.ContainsKey(s.Tag)) sectortags[s.Tag] = new List<Sector>();
					sectortags[s.Tag].Add(s);
				}
			}

			// Find sectors with 3 vertices, because they can be sloped
			foreach(Sector s in General.Map.Map.Sectors)
			{
				// ========== Thing vertex slope, vertices with UDMF vertex offsets ==========
				if(s.Sidedefs.Count == 3)
				{
					if(General.Map.UDMF) //mxd
						GetSectorData(s).AddEffectVertexOffset();

					List<Thing> slopeceilingthings = new List<Thing>(3);
					List<Thing> slopefloorthings = new List<Thing>(3);
					foreach(Sidedef sd in s.Sidedefs) {
						Vertex v = sd.IsFront ? sd.Line.End : sd.Line.Start;

						// Check if a thing is at this vertex
						VisualBlockEntry b = blockmap.GetBlock(blockmap.GetBlockCoordinates(v.Position));
						foreach(Thing t in b.Things) {
							if((Vector2D)t.Position == v.Position) {
								if(t.Type == 1504)
									slopefloorthings.Add(t);
								else if(t.Type == 1505)
									slopeceilingthings.Add(t);
							}
						}
					}

					// Slope any floor vertices?
					if(slopefloorthings.Count > 0) {
						SectorData sd = GetSectorData(s);
						sd.AddEffectThingVertexSlope(slopefloorthings, true);
					}

					// Slope any ceiling vertices?
					if(slopeceilingthings.Count > 0) {
						SectorData sd = GetSectorData(s);
						sd.AddEffectThingVertexSlope(slopeceilingthings, false);
					}
				}
			}
			
			// Find interesting linedefs (such as line slopes)
			foreach(Linedef l in General.Map.Map.Linedefs)
			{
				// ========== Plane Align (see http://zdoom.org/wiki/Plane_Align) ==========
				if(l.Action == 181)
				{
					// Slope front
					if(((l.Args[0] == 1) || (l.Args[1] == 1)) && (l.Front != null))
					{
						SectorData sd = GetSectorData(l.Front.Sector);
						sd.AddEffectLineSlope(l);
					}
					
					// Slope back
					if(((l.Args[0] == 2) || (l.Args[1] == 2)) && (l.Back != null))
					{
						SectorData sd = GetSectorData(l.Back.Sector);
						sd.AddEffectLineSlope(l);
					}
				}
				// ========== Plane Copy (mxd) (see http://zdoom.org/wiki/Plane_Copy) ==========
				else if(l.Action == 118)
				{
					//check the flags...
					bool floorCopyToBack = false;
					bool floorCopyToFront = false;
					bool ceilingCopyToBack = false;
					bool ceilingCopyToFront = false;

					if(l.Args[4] > 0 && l.Args[4] != 3 && l.Args[4] != 12) {
						floorCopyToBack = (l.Args[4] & 1) == 1;
						floorCopyToFront = (l.Args[4] & 2) == 2;
						ceilingCopyToBack = (l.Args[4] & 4) == 4;
						ceilingCopyToFront = (l.Args[4] & 8) == 8;
					}
					
					// Copy slope to front sector
					if(l.Front != null) {
						if( (l.Args[0] > 0 || l.Args[1] > 0) || (l.Back != null && (floorCopyToFront || ceilingCopyToFront)) ) {
							SectorData sd = GetSectorData(l.Front.Sector);
							sd.AddEffectPlaneClopySlope(l, true);
						}
					}

					// Copy slope to back sector
					if(l.Back != null) {
						if( (l.Args[2] > 0 || l.Args[3] > 0) || (l.Front != null && (floorCopyToBack || ceilingCopyToBack)) ) {
							SectorData sd = GetSectorData(l.Back.Sector);
							sd.AddEffectPlaneClopySlope(l, false);
						}
					}
				}
				// ========== Sector 3D floor (see http://zdoom.org/wiki/Sector_Set3dFloor) ==========
				else if((l.Action == 160) && (l.Front != null))
				{
					//mxd. Added hi-tag/line ID check 
					int sectortag = (l.Args[1] & (int)Effect3DFloor.FloorTypes.HiTagIsLineID) != 0 ? l.Args[0] : l.Args[0] + (l.Args[4] << 8);
					if(sectortags.ContainsKey(sectortag))
					{
						List<Sector> sectors = sectortags[sectortag];
						foreach(Sector s in sectors)
						{
							SectorData sd = GetSectorData(s);
							sd.AddEffect3DFloor(l);
						}
					}
				}
				// ========== Transfer Brightness (see http://zdoom.org/wiki/ExtraFloor_LightOnly) =========
				else if((l.Action == 50) && (l.Front != null))
				{
					if(sectortags.ContainsKey(l.Args[0]))
					{
						List<Sector> sectors = sectortags[l.Args[0]];
						foreach(Sector s in sectors)
						{
							SectorData sd = GetSectorData(s);
							sd.AddEffectBrightnessLevel(l);
						}
					}
				}
			}

			// Find interesting things (such as sector slopes)
			foreach(Thing t in General.Map.Map.Things)
			{
				// ========== Copy slope ==========
				if((t.Type == 9510) || (t.Type == 9511))
				{
					t.DetermineSector(blockmap);
					if(t.Sector != null)
					{
						SectorData sd = GetSectorData(t.Sector);
						sd.AddEffectCopySlope(t);
					}
				}
				// ========== Thing line slope ==========
				else if((t.Type == 9500) || (t.Type == 9501))
				{
					t.DetermineSector(blockmap);
					if(t.Sector != null)
					{
						SectorData sd = GetSectorData(t.Sector);
						sd.AddEffectThingLineSlope(t);
					}
				}
				// ========== Thing  slope ==========
				else if((t.Type == 9502) || (t.Type == 9503))
				{
					t.DetermineSector(blockmap);
					if(t.Sector != null)
					{
						SectorData sd = GetSectorData(t.Sector);
						sd.AddEffectThingSlope(t);
					}
				}
			}
		}
		
		#endregion

		#region ================== Events

		// Help!
		public override void OnHelp()
		{
			General.ShowHelp("e_visual.html");
		}

		// When entering this mode
		public override void OnEngage()
		{
			base.OnEngage();

			//mxd
			useSelectionFromClassicMode = BuilderPlug.Me.SyncSelection ? !General.Interface.ShiftState : General.Interface.ShiftState;
			if(useSelectionFromClassicMode)	updateSelectionInfo();

			// Read settings
			cameraflooroffset = General.Map.Config.ReadSetting("cameraflooroffset", cameraflooroffset);
			cameraceilingoffset = General.Map.Config.ReadSetting("cameraceilingoffset", cameraceilingoffset);

			RebuildElementData();
		}

		// When returning to another mode
		public override void OnDisengage()
		{
			base.OnDisengage();

			//mxd
			if(BuilderPlug.Me.SyncSelection ? !General.Interface.ShiftState : General.Interface.ShiftState) {
				//clear previously selected stuff
				General.Map.Map.ClearAllSelected();
				
				//refill selection
				List<Sector> selectedSectors = new List<Sector>();
				List<Linedef> selectedLines = new List<Linedef>();
				List<Vertex> selectedVertices = new List<Vertex>();

				foreach(IVisualEventReceiver obj in selectedobjects) {
					if(obj is BaseVisualThing) {
						((BaseVisualThing)obj).Thing.Selected = true;
					} else if(obj is VisualFloor || obj is VisualCeiling) {
						VisualGeometry vg = obj as VisualGeometry;

						if(vg.Sector != null && vg.Sector.Sector != null && !selectedSectors.Contains(vg.Sector.Sector)) {
							selectedSectors.Add(vg.Sector.Sector);

							foreach(Sidedef s in vg.Sector.Sector.Sidedefs){
								if(!selectedLines.Contains(s.Line))
									selectedLines.Add(s.Line);
							}
						}
					} else if(obj is VisualLower || obj is VisualUpper || obj is VisualMiddleDouble || obj is VisualMiddleSingle || obj is VisualMiddle3D) {
						VisualGeometry vg = obj as VisualGeometry;

						if(vg.Sidedef != null && !selectedLines.Contains(vg.Sidedef.Line))
							selectedLines.Add(vg.Sidedef.Line);
					}
				}

				foreach(Sector s in selectedSectors) 
					s.Selected = true;

				foreach(Linedef l in selectedLines) {
					l.Selected = true;

					if(!selectedVertices.Contains(l.Start))
						selectedVertices.Add(l.Start);
					if(!selectedVertices.Contains(l.End))
						selectedVertices.Add(l.End);
				}

				foreach(Vertex v in selectedVertices)
					v.Selected = true;
			}

			copyBuffer.Clear(); //mxd
			General.Map.Map.Update();
		}
		
		// Processing
		public override void OnProcess(float deltatime)
		{
			// Process things?
			base.ProcessThings = (BuilderPlug.Me.ShowVisualThings != 0);
			
			// Setup the move multiplier depending on gravity
			Vector3D movemultiplier = new Vector3D(1.0f, 1.0f, 1.0f);
			if(BuilderPlug.Me.UseGravity) movemultiplier.z = 0.0f;
			General.Map.VisualCamera.MoveMultiplier = movemultiplier;
			
			// Apply gravity?
			if(BuilderPlug.Me.UseGravity && (General.Map.VisualCamera.Sector != null))
			{
				SectorData sd = GetSectorData(General.Map.VisualCamera.Sector);
				if(!sd.Updated) sd.Update();

				// Camera below floor level?
				Vector3D feetposition = General.Map.VisualCamera.Position;
				SectorLevel floorlevel = sd.GetFloorBelow(feetposition) ?? sd.Floor;
				float floorheight = floorlevel.plane.GetZ(General.Map.VisualCamera.Position);
				if(General.Map.VisualCamera.Position.z < (floorheight + cameraflooroffset + 0.1f))
				{
					// Stay above floor
					gravity = new Vector3D(0.0f, 0.0f, 0.0f);
					General.Map.VisualCamera.Position = new Vector3D(General.Map.VisualCamera.Position.x,
																	 General.Map.VisualCamera.Position.y,
																	 floorheight + cameraflooroffset);
				}
				else
				{
					// Fall down
					gravity.z += GRAVITY * General.Map.VisualCamera.Gravity * deltatime;
					if(gravity.z > 3.0f) gravity.z = 3.0f;

					// Test if we don't go through a floor
					if((General.Map.VisualCamera.Position.z + gravity.z) < (floorheight + cameraflooroffset + 0.1f))
					{
						// Stay above floor
						gravity = new Vector3D(0.0f, 0.0f, 0.0f);
						General.Map.VisualCamera.Position = new Vector3D(General.Map.VisualCamera.Position.x,
																		 General.Map.VisualCamera.Position.y,
																		 floorheight + cameraflooroffset);
					}
					else
					{
						// Apply gravity vector
						General.Map.VisualCamera.Position += gravity;
					}
				}

				// Camera above ceiling?
				feetposition = General.Map.VisualCamera.Position - new Vector3D(0, 0, cameraflooroffset - 7.0f);
				SectorLevel ceillevel = sd.GetCeilingAbove(feetposition) ?? sd.Ceiling;
				float ceilheight = ceillevel.plane.GetZ(General.Map.VisualCamera.Position);
				if(General.Map.VisualCamera.Position.z > (ceilheight - cameraceilingoffset - 0.01f))
				{
					// Stay below ceiling
					General.Map.VisualCamera.Position = new Vector3D(General.Map.VisualCamera.Position.x,
																	 General.Map.VisualCamera.Position.y,
																	 ceilheight - cameraceilingoffset);
				}
			}
			else
			{
				gravity = new Vector3D(0.0f, 0.0f, 0.0f);
			}
			
			// Do processing
			base.OnProcess(deltatime);

			// Process visible geometry
			foreach(IVisualEventReceiver g in visiblegeometry)
			{
				g.OnProcess(deltatime);
			}
			
			// Time to pick a new target?
			if(Clock.CurrentTime > (lastpicktime + PICK_INTERVAL))
			{
				PickTargetUnlocked();
				lastpicktime = Clock.CurrentTime;
			}
			
			// The mouse is always in motion
			MouseEventArgs args = new MouseEventArgs(General.Interface.MouseButtons, 0, 0, 0, 0);
			OnMouseMove(args);
		}
		
		// This draws a frame
		public override void OnRedrawDisplay()
		{
			// Start drawing
			if(renderer.Start())
			{
				// Use fog!
				renderer.SetFogMode(true);

				// Set target for highlighting
				renderer.ShowSelection = General.Settings.GZOldHighlightMode || BuilderPlug.Me.UseHighlight; //mxd

				if(BuilderPlug.Me.UseHighlight)
					renderer.SetHighlightedObject(target.picked);
				
				// Begin with geometry
				renderer.StartGeometry();

				// Render all visible sectors
				foreach(VisualGeometry g in visiblegeometry)
					renderer.AddSectorGeometry(g);

				if(BuilderPlug.Me.ShowVisualThings != 0)
				{
					// Render things in cages?
					renderer.DrawThingCages = ((BuilderPlug.Me.ShowVisualThings & 2) != 0);
					
					// Render all visible things
					foreach(VisualThing t in visiblethings)
						renderer.AddThingGeometry(t);
				}

				//mxd
				if(General.Map.UDMF && General.Settings.GZShowVisualVertices && vertices.Count > 0) {
					List<VisualVertex> verts = new List<VisualVertex>();

					foreach(KeyValuePair<Vertex, VisualVertexPair> pair in vertices)
						verts.AddRange(pair.Value.Vertices);

					renderer.AddVisualVertices(verts.ToArray());
				}
				
				// Done rendering geometry
				renderer.FinishGeometry();
				
				// Render crosshair
				renderer.RenderCrosshair();
				
				// Present!
				renderer.Finish();
			}
		}
		
		// After resources were reloaded
		protected override void ResourcesReloaded()
		{
			base.ResourcesReloaded();
			RebuildElementData();
			PickTarget();
		}
		
		// This usually happens when geometry is changed by undo, redo, cut or paste actions
		// and uses the marks to check what needs to be reloaded.
		protected override void ResourcesReloadedPartial()
		{
			bool sectorsmarked = false;
			
			if(General.Map.UndoRedo.GeometryChanged)
			{
				// Let the core do this (it will just dispose the sectors that were changed)
				base.ResourcesReloadedPartial();
			}
			else
			{
				// Neighbour sectors must be updated as well
				foreach(Sector s in General.Map.Map.Sectors)
				{
					if(s.Marked)
					{
						sectorsmarked = true;
						foreach(Sidedef sd in s.Sidedefs)
						{
							sd.Marked = true;
							if(sd.Other != null) sd.Other.Marked = true;
						}
					}
				}
				
				// Go for all sidedefs to update
				foreach(Sidedef sd in General.Map.Map.Sidedefs)
				{
					if(sd.Marked && VisualSectorExists(sd.Sector))
					{
						BaseVisualSector vs = GetVisualSector(sd.Sector) as BaseVisualSector;
						VisualSidedefParts parts = vs.GetSidedefParts(sd);
						parts.SetupAllParts();
					}
				}
				
				// Go for all sectors to update
				foreach(Sector s in General.Map.Map.Sectors)
				{
					if(s.Marked)
					{
						SectorData sd = GetSectorData(s);
						sd.Reset();
						
						// UpdateSectorGeometry for associated sectors (sd.UpdateAlso) as well!
						foreach(KeyValuePair<Sector, bool> us in sd.UpdateAlso)
						{
							if(VisualSectorExists(us.Key))
							{
								BaseVisualSector vs = GetVisualSector(us.Key) as BaseVisualSector;
								vs.UpdateSectorGeometry(us.Value);
							}
						}
						
						// And update for this sector ofcourse
						if(VisualSectorExists(s))
						{
							BaseVisualSector vs = GetVisualSector(s) as BaseVisualSector;
							vs.UpdateSectorGeometry(false);
						}
					}
				}
				
				if(!sectorsmarked)
				{
					// No sectors or geometry changed. So we only have
					// to update things when they have changed.
					foreach(KeyValuePair<Thing, VisualThing> vt in allthings)
						if((vt.Value != null) && vt.Key.Marked) (vt.Value as BaseVisualThing).Rebuild();
				}
				else
				{
					// Things depend on the sector they are in and because we can't
					// easily determine which ones changed, we dispose all things
					foreach(KeyValuePair<Thing, VisualThing> vt in allthings)
						if(vt.Value != null) vt.Value.Dispose();
					
					// Apply new lists
					allthings = new Dictionary<Thing, VisualThing>(allthings.Count);
				}
				
				// Clear visibility collections
				visiblesectors.Clear();
				visibleblocks.Clear();
				visiblegeometry.Clear();
				visiblethings.Clear();
				
				// Make new blockmap
				if(sectorsmarked || General.Map.UndoRedo.PopulationChanged)
					FillBlockMap();
				
				RebuildElementData();
				UpdateChangedObjects();
				
				// Visibility culling (this re-creates the needed resources)
				DoCulling();
			}
			
			// Determine what we're aiming at now
			PickTarget();
		}
		
		// Mouse moves
		public override void OnMouseMove(MouseEventArgs e)
		{
			base.OnMouseMove(e);
			IVisualEventReceiver o = GetTargetEventReceiver(true);
			o.OnMouseMove(e);

			//mxd. Show hints!
			if(o.GetType() != lasthighlighttype) 
			{
				if(General.Interface.ActiveDockerTabName == "Help") 
				{
					if (o is BaseVisualGeometrySidedef) 
					{
						General.Hints.ShowHints(this.GetType(), "sidedefs");
					}
					else if (o is BaseVisualGeometrySector) 
					{
						General.Hints.ShowHints(this.GetType(), "sectors");
					}
					else if (o is BaseVisualThing) 
					{
						General.Hints.ShowHints(this.GetType(), "things");
					}
					else if (o is BaseVisualVertex) 
					{
						General.Hints.ShowHints(this.GetType(), "vertices");
					}
					else 
					{
						General.Hints.ShowHints(this.GetType(), HintsManager.GENERAL);
					}
				}

				lasthighlighttype = o.GetType();
			}
		}
		
		// Undo performed
		public override void OnUndoEnd()
		{
			base.OnUndoEnd();

			//mxd. Effects may've become invalid
			if(gzdoomRenderingEffects && sectordata != null && sectordata.Count > 0)
				RebuildElementData();

			//mxd. As well as geometry...
			foreach(KeyValuePair<Sector, VisualSector> group in visiblesectors){
				if (group.Value is BaseVisualSector)
					(group.Value as BaseVisualSector).Rebuild();
			}

			RebuildSelectedObjectsList();
			
			// We can't group with this undo level anymore
			lastundogroup = UndoGroup.None;

			//mxd
			updateSelectionInfo();
		}
		
		// Redo performed
		public override void OnRedoEnd()
		{
			base.OnRedoEnd();

			//mxd. Effects may've become invalid
			if(sectordata != null && sectordata.Count > 0)
				RebuildElementData();

			//mxd. As well as geometry...
			foreach (KeyValuePair<Sector, VisualSector> group in visiblesectors) {
				if (group.Value is BaseVisualSector)
					(group.Value as BaseVisualSector).Rebuild();
			}

			RebuildSelectedObjectsList();

			//mxd
			updateSelectionInfo();
		}

		//mxd
		private void Interface_OnSectorEditFormValuesChanged(object sender, EventArgs e) {
			if(allsectors == null) return;

			// Reset changed flags
			foreach(KeyValuePair<Sector, VisualSector> vs in allsectors) {
				BaseVisualSector bvs = (vs.Value as BaseVisualSector);
				foreach(VisualFloor vf in bvs.ExtraFloors) vf.Changed = false;
				foreach(VisualCeiling vc in bvs.ExtraCeilings) vc.Changed = false;
				foreach(VisualFloor vf in bvs.ExtraBackFloors) vf.Changed = false;
				foreach(VisualCeiling vc in bvs.ExtraBackCeilings) vc.Changed = false;
				bvs.Floor.Changed = false;
				bvs.Ceiling.Changed = false;
			}

			UpdateChangedObjects();
			ShowTargetInfo();
		}

		//mxd
		private void Interface_OnThingEditFormValuesChanged(object sender, EventArgs e) {
			//update visual sectors, which are affected by certain things
			List<Thing> things = GetSelectedThings();
			foreach(Thing t in things) {
				if(thingdata.ContainsKey(t)) {
					// Update what must be updated
					ThingData td = GetThingData(t);
					foreach(KeyValuePair<Sector, bool> s in td.UpdateAlso) {
						if(VisualSectorExists(s.Key)) {
							BaseVisualSector vs = GetVisualSector(s.Key) as BaseVisualSector;
							vs.UpdateSectorGeometry(s.Value);
						}
					}
				}
			}
			
			UpdateChangedObjects();
			ShowTargetInfo();
		}

		//mxd
		private void Interface_OnEditFormValuesChanged(object sender, EventArgs e) {
			UpdateChangedObjects();
			ShowTargetInfo();
		}
		
		#endregion

		#region ================== Action Assist

		// Because some actions can only be called on a single (the targeted) object because
		// they show a dialog window or something, these functions help applying the result
		// to all compatible selected objects.
		
		// Apply texture offsets
		public void ApplyTextureOffsetChange(int dx, int dy)
		{
			Dictionary<Sidedef, int> donesides = new Dictionary<Sidedef, int>(selectedobjects.Count);
			List<IVisualEventReceiver> objs = GetSelectedObjects(false, true, false, false);
			foreach(IVisualEventReceiver i in objs) {
				BaseVisualGeometrySidedef vs = i as BaseVisualGeometrySidedef; //mxd

				if(i is BaseVisualGeometrySidedef) {
					if(!donesides.ContainsKey(vs.Sidedef))
					{
						//mxd. added scaling by texture scale
						if(vs.Texture.UsedInMap) //mxd. Otherwise it's MissingTexture3D and we probably don't want to drag that
							vs.OnChangeTextureOffset((int)(dx / vs.Texture.Scale.x), (int)(dy / vs.Texture.Scale.y), false);
						donesides.Add((i as BaseVisualGeometrySidedef).Sidedef, 0);
					}
				}
			}
		}

		// Apply flat offsets
		public void ApplyFlatOffsetChange(int dx, int dy)
		{
			Dictionary<Sector, int> donesectors = new Dictionary<Sector, int>(selectedobjects.Count);
			List<IVisualEventReceiver> objs = GetSelectedObjects(true, false, false, false);
			foreach(IVisualEventReceiver i in objs)
			{
				if(i is BaseVisualGeometrySector)
				{
					if(!donesectors.ContainsKey((i as BaseVisualGeometrySector).Sector.Sector))
					{
						i.OnChangeTextureOffset(dx, dy, false);
						donesectors.Add((i as BaseVisualGeometrySector).Sector.Sector, 0);
					}
				}
			}
		}

		// Apply upper unpegged flag
		public void ApplyUpperUnpegged(bool set)
		{
			List<IVisualEventReceiver> objs = GetSelectedObjects(false, true, false, false);
			foreach(IVisualEventReceiver i in objs)
			{
				i.ApplyUpperUnpegged(set);
			}
		}

		// Apply lower unpegged flag
		public void ApplyLowerUnpegged(bool set)
		{
			List<IVisualEventReceiver> objs = GetSelectedObjects(false, true, false, false);
			foreach(IVisualEventReceiver i in objs)
			{
				i.ApplyLowerUnpegged(set);
			}
		}

		// Apply texture change
		public void ApplySelectTexture(string texture, bool flat)
		{
			List<IVisualEventReceiver> objs;
			
			if(General.Map.Config.MixTexturesFlats)
			{
				// Apply on all compatible types
				objs = GetSelectedObjects(true, true, false, false);
			}
			else
			{
				// We don't want to mix textures and flats, so apply only on the appropriate type
				objs = GetSelectedObjects(flat, !flat, false, false);
			}
			
			foreach(IVisualEventReceiver i in objs)
			{
				i.ApplyTexture(texture);
			}
		}

		// This returns all selected objects
		internal List<IVisualEventReceiver> GetSelectedObjects(bool includesectors, bool includesidedefs, bool includethings, bool includevertices)
		{
			List<IVisualEventReceiver> objs = new List<IVisualEventReceiver>();
			foreach(IVisualEventReceiver i in selectedobjects)
			{
				if((i is BaseVisualGeometrySector) && includesectors) objs.Add(i);
				else if((i is BaseVisualGeometrySidedef) && includesidedefs) objs.Add(i);
				else if((i is BaseVisualThing) && includethings) objs.Add(i);
				else if((i is BaseVisualVertex) && includevertices) objs.Add(i);//mxd
			}

			// Add highlight?
			if(selectedobjects.Count == 0)
			{
				IVisualEventReceiver i = (target.picked as IVisualEventReceiver);
				if((i is BaseVisualGeometrySector) && includesectors) objs.Add(i);
				else if((i is BaseVisualGeometrySidedef) && includesidedefs) objs.Add(i);
				else if((i is BaseVisualThing) && includethings) objs.Add(i);
				else if((i is BaseVisualVertex) && includevertices) objs.Add(i);//mxd
			}

			return objs;
		}

		// This returns all selected sectors, no doubles
		public List<Sector> GetSelectedSectors()
		{
			Dictionary<Sector, int> added = new Dictionary<Sector, int>();
			List<Sector> sectors = new List<Sector>();
			foreach(IVisualEventReceiver i in selectedobjects)
			{
				if(i is BaseVisualGeometrySector)
				{
					Sector s = (i as BaseVisualGeometrySector).Level.sector;
					if(!added.ContainsKey(s))
					{
						sectors.Add(s);
						added.Add(s, 0);
					}
				}
			}

			// Add highlight?
			if((selectedobjects.Count == 0) && (target.picked is BaseVisualGeometrySector))
			{
				Sector s = (target.picked as BaseVisualGeometrySector).Level.sector;
				if(!added.ContainsKey(s)) sectors.Add(s);
			}
			
			return sectors;
		}

		// This returns all selected linedefs, no doubles
		public List<Linedef> GetSelectedLinedefs()
		{
			Dictionary<Linedef, int> added = new Dictionary<Linedef, int>();
			List<Linedef> linedefs = new List<Linedef>();
			foreach(IVisualEventReceiver i in selectedobjects)
			{
				if(i is BaseVisualGeometrySidedef)
				{
					Linedef l = (i as BaseVisualGeometrySidedef).GetControlLinedef(); //mxd
					if(!added.ContainsKey(l))
					{
						linedefs.Add(l);
						added.Add(l, 0);
					}
				}
			}

			// Add highlight?
			if((selectedobjects.Count == 0) && (target.picked is BaseVisualGeometrySidedef))
			{
				Linedef l = (target.picked as BaseVisualGeometrySidedef).GetControlLinedef(); //mxd
				if(!added.ContainsKey(l)) linedefs.Add(l);
			}

			return linedefs;
		}

		// This returns all selected sidedefs, no doubles
		public List<Sidedef> GetSelectedSidedefs()
		{
			Dictionary<Sidedef, int> added = new Dictionary<Sidedef, int>();
			List<Sidedef> sidedefs = new List<Sidedef>();
			foreach(IVisualEventReceiver i in selectedobjects)
			{
				if(i is BaseVisualGeometrySidedef)
				{
					Sidedef sd = (i as BaseVisualGeometrySidedef).Sidedef;
					if(!added.ContainsKey(sd))
					{
						sidedefs.Add(sd);
						added.Add(sd, 0);
					}
				}
			}

			// Add highlight?
			if((selectedobjects.Count == 0) && (target.picked is BaseVisualGeometrySidedef))
			{
				Sidedef sd = (target.picked as BaseVisualGeometrySidedef).Sidedef;
				if(!added.ContainsKey(sd)) sidedefs.Add(sd);
			}

			return sidedefs;
		}

		// This returns all selected things, no doubles
		public List<Thing> GetSelectedThings()
		{
			Dictionary<Thing, int> added = new Dictionary<Thing, int>();
			List<Thing> things = new List<Thing>();
			foreach(IVisualEventReceiver i in selectedobjects)
			{
				if(i is BaseVisualThing)
				{
					Thing t = (i as BaseVisualThing).Thing;
					if(!added.ContainsKey(t))
					{
						things.Add(t);
						added.Add(t, 0);
					}
				}
			}

			// Add highlight?
			if((selectedobjects.Count == 0) && (target.picked is BaseVisualThing))
			{
				Thing t = (target.picked as BaseVisualThing).Thing;
				if(!added.ContainsKey(t)) things.Add(t);
			}

			return things;
		}

		//mxd. This returns all selected vertices, no doubles
		public List<Vertex> GetSelectedVertices() {
			Dictionary<Vertex, int> added = new Dictionary<Vertex, int>();
			List<Vertex> verts = new List<Vertex>();

			foreach(IVisualEventReceiver i in selectedobjects) {
				if(i is BaseVisualVertex) {
					Vertex v = (i as BaseVisualVertex).Vertex;
					
					if(!added.ContainsKey(v)) {
						verts.Add(v);
						added.Add(v, 0);
					}
				}
			}

			// Add highlight?
			if((selectedobjects.Count == 0) && (target.picked is BaseVisualVertex)) {
				Vertex v = (target.picked as BaseVisualVertex).Vertex;
				if(!added.ContainsKey(v))
					verts.Add(v);
			}

			return verts;
		}
		
		// This returns the IVisualEventReceiver on which the action must be performed
		private IVisualEventReceiver GetTargetEventReceiver(bool targetonly)
		{
			if(target.picked != null)
			{
				if(singleselection || target.picked.Selected || targetonly)
				{
					return target.picked as IVisualEventReceiver;
				}

				if(selectedobjects.Count > 0)
				{
					return selectedobjects[0];
				}

				return target.picked as IVisualEventReceiver;
			}

			return new NullVisualEventReceiver();
		}

		//mxd. Copied from BuilderModes.ThingsMode
		// This creates a new thing
		private static Thing CreateThing(Vector2D pos) 
		{
			if (pos.x < General.Map.Config.LeftBoundary || pos.x > General.Map.Config.RightBoundary ||
				pos.y > General.Map.Config.TopBoundary || pos.y < General.Map.Config.BottomBoundary) {
				General.Interface.DisplayStatus(StatusType.Warning, "Failed to insert thing: outside of map boundaries.");
				return null;
			}

			// Create thing
			Thing t = General.Map.Map.CreateThing();
			if (t != null) {
				General.Settings.ApplyDefaultThingSettings(t);
				t.Move(pos);
				t.UpdateConfiguration();
				General.Map.IsChanged = true;
				
				// Update things filter so that it includes this thing
				General.Map.ThingsFilter.Update();

				// Snap to grid enabled?
				if (General.Interface.SnapToGrid) {
					// Snap to grid
					t.SnapToGrid();
				} else {
					// Snap to map format accuracy
					t.SnapToAccuracy();
				}
			}

			return t;
		}
		
		#endregion

		#region ================== Actions

		[BeginAction("clearselection", BaseAction = true)]
		public void ClearSelection()
		{
			selectedobjects = new List<IVisualEventReceiver>();
			
			foreach(KeyValuePair<Sector, VisualSector> vs in allsectors)
			{
				if(vs.Value != null)
				{
					BaseVisualSector bvs = (BaseVisualSector)vs.Value;
					if(bvs.Floor != null) bvs.Floor.Selected = false;
					if(bvs.Ceiling != null) bvs.Ceiling.Selected = false;
					foreach(VisualFloor vf in bvs.ExtraFloors) vf.Selected = false;
					foreach(VisualCeiling vc in bvs.ExtraCeilings) vc.Selected = false;
					foreach(VisualFloor vf in bvs.ExtraBackFloors) vf.Selected = false; //mxd
					foreach(VisualCeiling vc in bvs.ExtraBackCeilings) vc.Selected = false; //mxd

					foreach(Sidedef sd in vs.Key.Sidedefs)
					{
						//mxd. VisualSidedefParts can contain references to visual geometry, which is not present in VisualSector.sidedefgeometry
						bvs.GetSidedefParts(sd).DeselectAllParts();
					}
				}
			}

			foreach(KeyValuePair<Thing, VisualThing> vt in allthings)
			{
				if(vt.Value != null)
				{
					BaseVisualThing bvt = vt.Value as BaseVisualThing;
					bvt.Selected = false;
				}
			}

			//mxd
			if(General.Map.UDMF) {
				foreach(KeyValuePair<Vertex, VisualVertexPair> pair in vertices) {
					pair.Value.Deselect();
				}
			}

			//mxd
			General.Interface.DisplayStatus(StatusType.Selection, string.Empty);
		}

		[BeginAction("visualselect", BaseAction = true)]
		public void BeginSelect()
		{
			PreActionNoChange();
			PickTargetUnlocked();
			GetTargetEventReceiver(true).OnSelectBegin();
			PostAction();
		}

		[EndAction("visualselect", BaseAction = true)]
		public void EndSelect()
		{
			IVisualEventReceiver target = GetTargetEventReceiver(true);
			target.OnSelectEnd();

			//mxd
			if((General.Interface.ShiftState || General.Interface.CtrlState) && selectedobjects.Count > 0) {
				IVisualEventReceiver[] selection = new IVisualEventReceiver[selectedobjects.Count];
				selectedobjects.CopyTo(selection);

				foreach(IVisualEventReceiver obj in selection)
					obj.SelectNeighbours(target.IsSelected(), General.Interface.ShiftState, General.Interface.CtrlState);
			}

			Renderer.ShowSelection = true;
			Renderer.ShowHighlight = true;
			PostAction();

			//mxd
			updateSelectionInfo();
		}

		[BeginAction("visualedit", BaseAction = true)]
		public void BeginEdit()
		{
			PreAction(UndoGroup.None);
			GetTargetEventReceiver(false).OnEditBegin();
			PostAction();
		}

		[EndAction("visualedit", BaseAction = true)]
		public void EndEdit()
		{
			PreActionNoChange();
			GetTargetEventReceiver(false).OnEditEnd();
			PostAction();
		}

		[BeginAction("raisesector8")]
		public void RaiseSector8()
		{
			PreAction(UndoGroup.SectorHeightChange);
			List<IVisualEventReceiver> objs = GetSelectedObjects(true, true, true, true);
			foreach(IVisualEventReceiver i in objs) i.OnChangeTargetHeight(8);
			PostAction();
		}

		[BeginAction("lowersector8")]
		public void LowerSector8()
		{
			PreAction(UndoGroup.SectorHeightChange);
			List<IVisualEventReceiver> objs = GetSelectedObjects(true, true, true, true);
			foreach(IVisualEventReceiver i in objs) i.OnChangeTargetHeight(-8);
			PostAction();
		}

		[BeginAction("raisesector1")]
		public void RaiseSector1()
		{
			PreAction(UndoGroup.SectorHeightChange);
			List<IVisualEventReceiver> objs = GetSelectedObjects(true, true, true, true);
			foreach(IVisualEventReceiver i in objs) i.OnChangeTargetHeight(1);
			PostAction();
		}

		[BeginAction("lowersector1")]
		public void LowerSector1()
		{
			PreAction(UndoGroup.SectorHeightChange);
			List<IVisualEventReceiver> objs = GetSelectedObjects(true, true, true, true);
			foreach(IVisualEventReceiver i in objs) i.OnChangeTargetHeight(-1);
			PostAction();
		}

		//mxd
		[BeginAction("raisesectortonearest")]
		public void RaiseSectorToNearest() {
			Dictionary<Sector, VisualFloor> floors = new Dictionary<Sector, VisualFloor>();
			Dictionary<Sector, VisualCeiling> ceilings = new Dictionary<Sector, VisualCeiling>();
			List<BaseVisualThing> things = new List<BaseVisualThing>();
			bool withinSelection = General.Interface.CtrlState;

			//get selection
			if(selectedobjects.Count == 0) {
				IVisualEventReceiver i = (target.picked as IVisualEventReceiver);
				if(i is VisualFloor) {
					VisualFloor vf = i as VisualFloor;
					floors.Add(vf.Level.sector, vf);
				} else if(i is VisualCeiling) {
					VisualCeiling vc = i as VisualCeiling;
					ceilings.Add(vc.Level.sector, vc);
				} else if(i is BaseVisualThing) {
					things.Add(i as BaseVisualThing);
				}
			} else {
				foreach(IVisualEventReceiver i in selectedobjects) {
					if(i is VisualFloor) {
						VisualFloor vf = i as VisualFloor;
						floors.Add(vf.Level.sector, vf);
					} else if(i is VisualCeiling) {
						VisualCeiling vc = i as VisualCeiling;
						ceilings.Add(vc.Level.sector, vc);
					} else if(i is BaseVisualThing) {
						things.Add(i as BaseVisualThing);
					}
				}
			}

			//check what we have
			if(floors.Count + ceilings.Count == 0 && (things.Count == 0 || !General.Map.FormatInterface.HasThingHeight)) {
				General.Interface.DisplayStatus(StatusType.Warning, "No suitable objects found!");
				return;
			} 
			
			if(withinSelection) {
				string s = string.Empty;

				if(floors.Count == 1) s = "floors";

				if(ceilings.Count == 1) {
					if(!string.IsNullOrEmpty(s)) s += " and ";
					s += "ceilings";
				}

				if(!string.IsNullOrEmpty(s)){
					General.Interface.DisplayStatus(StatusType.Warning, "Can't do: at least 2 selected " + s + " are required!");
					return;
				}
			}

			//process floors...
			int maxSelectedHeight = int.MinValue;
			int minSelectedCeilingHeight = int.MaxValue;
			int targetCeilingHeight = int.MaxValue;

			//get highest ceiling height from selection
			foreach(KeyValuePair<Sector, VisualCeiling> group in ceilings) {
				if(group.Key.CeilHeight > maxSelectedHeight)
					maxSelectedHeight = group.Key.CeilHeight;
			}

			if(withinSelection) {
				//we are raising, so we don't need to check anything
				targetCeilingHeight = maxSelectedHeight;
			} else {
				//get next higher ceiling from surrounding unselected sectors
				foreach(KeyValuePair<Sector, VisualCeiling> group in ceilings) {
					foreach(Sidedef side in group.Key.Sidedefs) {
						if(side.Other == null || ceilings.ContainsKey(side.Other.Sector) || floors.ContainsKey(side.Other.Sector))
							continue;
						if(side.Other.Sector.CeilHeight < targetCeilingHeight && side.Other.Sector.CeilHeight > maxSelectedHeight)
							targetCeilingHeight = side.Other.Sector.CeilHeight;
					}
				}
			}

			//ceilings...
			maxSelectedHeight = int.MinValue;
			int targetFloorHeight = int.MaxValue;

			//get maximum floor and minimum ceiling heights from selection
			foreach(KeyValuePair<Sector, VisualFloor> group in floors) {
				if(group.Key.FloorHeight > maxSelectedHeight)
					maxSelectedHeight = group.Key.FloorHeight;

				if(group.Key.CeilHeight < minSelectedCeilingHeight)
					minSelectedCeilingHeight = group.Key.CeilHeight;
			}

			if(withinSelection) {
				//check heights
				if(minSelectedCeilingHeight < maxSelectedHeight) {
					General.Interface.DisplayStatus(StatusType.Warning, "Can't do: lowest ceiling is lower than highest floor!");
					return;
				} 
				targetFloorHeight = maxSelectedHeight;
			} else {
				//get next higher floor from surrounding unselected sectors
				foreach(KeyValuePair<Sector, VisualFloor> group in floors) {
					foreach(Sidedef side in group.Key.Sidedefs) {
						if(side.Other == null || ceilings.ContainsKey(side.Other.Sector) || floors.ContainsKey(side.Other.Sector))
							continue;
						if(side.Other.Sector.FloorHeight > maxSelectedHeight && side.Other.Sector.FloorHeight < targetFloorHeight && side.Other.Sector.FloorHeight <= minSelectedCeilingHeight)
							targetFloorHeight = side.Other.Sector.FloorHeight;
					}
				}
			}

			//CHECK VALUES
			string alignFailDescription = string.Empty;

			if (floors.Count > 0 && targetFloorHeight == int.MaxValue) {
				//raise to lowest ceiling?
				if(!withinSelection && minSelectedCeilingHeight > maxSelectedHeight) {
					targetFloorHeight = minSelectedCeilingHeight;
				} else {
					alignFailDescription = floors.Count > 1 ? "floors" : "floor";
				}
			}

			if(ceilings.Count > 0 && targetCeilingHeight == int.MaxValue) {
				if(!string.IsNullOrEmpty(alignFailDescription))
					alignFailDescription += " and ";

				alignFailDescription += ceilings.Count > 1 ? "ceilings" : "ceiling";
			}

			if(!string.IsNullOrEmpty(alignFailDescription)) {
				General.Interface.DisplayStatus(StatusType.Warning, "Unable to align selected " + alignFailDescription + "!");
				return;
			}

			//APPLY VALUES
			PreAction(UndoGroup.SectorHeightChange);

			//change floors heights
			if(floors.Count > 0) {
				foreach(KeyValuePair<Sector, VisualFloor> group in floors) {
					if(targetFloorHeight != group.Key.FloorHeight)
						group.Value.OnChangeTargetHeight(targetFloorHeight - group.Key.FloorHeight);
				}
			}

			//change ceilings heights
			if(ceilings.Count > 0) {
				foreach(KeyValuePair<Sector, VisualCeiling> group in ceilings) {
					if(targetCeilingHeight != group.Key.CeilHeight)
						group.Value.OnChangeTargetHeight(targetCeilingHeight - group.Key.CeilHeight);
				}
			}

			//and things. Just align them to ceiling
			if(General.Map.FormatInterface.HasThingHeight) {
				foreach(BaseVisualThing vt in things) {
					if(vt.Thing.Sector == null) continue;
					ThingTypeInfo ti = General.Map.Data.GetThingInfo(vt.Thing.Type);
					int zvalue = (int)(vt.Thing.Sector.FloorHeight + vt.Thing.Position.z);

					if(zvalue != vt.Thing.Sector.CeilHeight - ti.Height)
						vt.OnChangeTargetHeight((int)(vt.Thing.Sector.CeilHeight - ti.Height) - zvalue);
				}
			}

			PostAction();
		}

		//mxd
		[BeginAction("lowersectortonearest")]
		public void LowerSectorToNearest() {
			Dictionary<Sector, VisualFloor> floors = new Dictionary<Sector, VisualFloor>();
			Dictionary<Sector, VisualCeiling> ceilings = new Dictionary<Sector, VisualCeiling>();
			List<BaseVisualThing> things = new List<BaseVisualThing>();
			bool withinSelection = General.Interface.CtrlState;

			//get selection
			if(selectedobjects.Count == 0) {
				IVisualEventReceiver i = (target.picked as IVisualEventReceiver);
				if(i is VisualFloor) {
					VisualFloor vf = i as VisualFloor;
					floors.Add(vf.Level.sector, vf);
				} else if(i is VisualCeiling) {
					VisualCeiling vc = i as VisualCeiling;
					ceilings.Add(vc.Level.sector, vc);
				} else if(i is BaseVisualThing) {
					things.Add(i as BaseVisualThing);
				}
			}else{
				foreach(IVisualEventReceiver i in selectedobjects) {
					if(i is VisualFloor) {
						VisualFloor vf = i as VisualFloor;
						floors.Add(vf.Level.sector, vf);
					} else if(i is VisualCeiling) {
						VisualCeiling vc = i as VisualCeiling;
						ceilings.Add(vc.Level.sector, vc);
					} else if(i is BaseVisualThing) {
						things.Add(i as BaseVisualThing);
					}
				}
			}

			//check what we have
			if(floors.Count + ceilings.Count == 0 && (things.Count == 0 || !General.Map.FormatInterface.HasThingHeight)) {
				General.Interface.DisplayStatus(StatusType.Warning, "No suitable objects found!");
				return;
			}

			if(withinSelection) {
				string s = string.Empty;

				if(floors.Count == 1) s = "floors";

				if(ceilings.Count == 1) {
					if(!string.IsNullOrEmpty(s)) s += " and ";
					s += "ceilings";
				}

				if(!string.IsNullOrEmpty(s)) {
					General.Interface.DisplayStatus(StatusType.Warning, "Can't do: at least 2 selected " + s + " are required!");
					return;
				}
			}

			//process floors...
			int minSelectedHeight = int.MaxValue;
			int targetFloorHeight = int.MinValue;

			//get minimum floor height from selection
			foreach(KeyValuePair<Sector, VisualFloor> group in floors) {
				if(group.Key.FloorHeight < minSelectedHeight)
					minSelectedHeight = group.Key.FloorHeight;
			}
			
			if(withinSelection) {
				//we are lowering, so we don't need to check anything
				targetFloorHeight = minSelectedHeight;
			} else {
				//get next floor lower height from surrounding unselected sectors
				foreach(KeyValuePair<Sector, VisualFloor> group in floors) {
					foreach(Sidedef side in group.Key.Sidedefs) {
						if(side.Other == null || ceilings.ContainsKey(side.Other.Sector) || floors.ContainsKey(side.Other.Sector))
							continue;
						if(side.Other.Sector.FloorHeight > targetFloorHeight && side.Other.Sector.FloorHeight < minSelectedHeight)
							targetFloorHeight = side.Other.Sector.FloorHeight;
					}
				}
			}

			//ceilings...
			minSelectedHeight = int.MaxValue;
			int maxSelectedFloorHeight = int.MinValue;
			int targetCeilingHeight = int.MinValue;

			//get minimum ceiling and maximum floor heights from selection
			foreach(KeyValuePair<Sector, VisualCeiling> group in ceilings) {
				if(group.Key.CeilHeight < minSelectedHeight)
					minSelectedHeight = group.Key.CeilHeight;

				if(group.Key.FloorHeight > maxSelectedFloorHeight)
					maxSelectedFloorHeight = group.Key.FloorHeight;
			}

			if(withinSelection) {
				if(minSelectedHeight < maxSelectedFloorHeight) {
					General.Interface.DisplayStatus(StatusType.Warning, "Can't do: lowest ceiling is lower than highest floor!");
					return;
				} 
				targetCeilingHeight = minSelectedHeight;
			} else {
				//get next lower ceiling height from surrounding unselected sectors
				foreach(KeyValuePair<Sector, VisualCeiling> group in ceilings) {
					foreach(Sidedef side in group.Key.Sidedefs) {
						if(side.Other == null || ceilings.ContainsKey(side.Other.Sector) || floors.ContainsKey(side.Other.Sector))
							continue;
						if(side.Other.Sector.CeilHeight > targetCeilingHeight && side.Other.Sector.CeilHeight < minSelectedHeight && side.Other.Sector.CeilHeight >= maxSelectedFloorHeight)
							targetCeilingHeight = side.Other.Sector.CeilHeight;
					}
				}
			}

			//CHECK VALUES:
			string alignFailDescription = string.Empty;

			if(floors.Count > 0 && targetFloorHeight == int.MinValue) 
				alignFailDescription = floors.Count > 1 ? "floors" : "floor";

			if(ceilings.Count > 0 && targetCeilingHeight == int.MinValue) {
				//drop to highest floor?
				if(!withinSelection && maxSelectedFloorHeight < minSelectedHeight) {
					targetCeilingHeight = maxSelectedFloorHeight;
				} else {
					if (!string.IsNullOrEmpty(alignFailDescription)) alignFailDescription += " and ";
					alignFailDescription += ceilings.Count > 1 ? "ceilings" : "ceiling";
				}
			}

			if(!string.IsNullOrEmpty(alignFailDescription)) {
				General.Interface.DisplayStatus(StatusType.Warning, "Unable to align selected " + alignFailDescription + "!");
				return;
			}

			//APPLY VALUES:
			PreAction(UndoGroup.SectorHeightChange);

			//change floor height
			if(floors.Count > 0) {
				foreach(KeyValuePair<Sector, VisualFloor> group in floors) {
					if(targetFloorHeight != group.Key.FloorHeight)
						group.Value.OnChangeTargetHeight(targetFloorHeight - group.Key.FloorHeight);
				}
			}

			//change ceiling height
			if(ceilings.Count > 0) {
				foreach(KeyValuePair<Sector, VisualCeiling> group in ceilings) {
					if(targetCeilingHeight != group.Key.CeilHeight)
						group.Value.OnChangeTargetHeight(targetCeilingHeight - group.Key.CeilHeight);
				}
			}

			//process things. Just drop them to ground
			if(General.Map.FormatInterface.HasThingHeight){
				foreach(BaseVisualThing vt in things) {
					if(vt.Thing.Sector == null) continue;
					
					if(vt.Thing.Position.z != 0)
						vt.OnChangeTargetHeight((int)-vt.Thing.Position.z);
				}
			}

			PostAction();
		}

		//mxd
		[BeginAction("matchbrightness")]
		public void MatchBrightness() {
			//check input
			if (!General.Map.UDMF) {
				General.Interface.DisplayStatus(StatusType.Warning, "'Match Brightness' action works only in UDMF map format!");
				return;
			}

			if (selectedobjects.Count == 0) {
				General.Interface.DisplayStatus(StatusType.Warning, "'Match Brightness' action requires a selection!");
				return;
			}

			IVisualEventReceiver highlighted = (target.picked as IVisualEventReceiver);

			if(highlighted is BaseVisualThing) {
				General.Interface.DisplayStatus(StatusType.Warning, "Highlight a surface, to which you want to match the brightness.");
				return;
			}

			//get target brightness
			int targetBrightness;
			if(highlighted is VisualFloor) {
				VisualFloor v = highlighted as VisualFloor;
				targetBrightness = v.Level.sector.Fields.GetValue("lightfloor", 0);
				if (!v.Level.sector.Fields.GetValue("lightfloorabsolute", false)) {
					targetBrightness += v.Level.sector.Brightness;
				}
			} else if(highlighted is VisualCeiling) {
				VisualCeiling v = highlighted as VisualCeiling;
				targetBrightness = v.Level.sector.Fields.GetValue("lightceiling", 0);
				if(!v.Level.sector.Fields.GetValue("lightceilingabsolute", false)) {
					targetBrightness += v.Level.sector.Brightness;
				}
			} else if(highlighted is VisualUpper || highlighted is VisualMiddleSingle || highlighted is VisualMiddleDouble || highlighted is VisualLower) {
				BaseVisualGeometrySidedef v = highlighted as BaseVisualGeometrySidedef;
				targetBrightness = v.Sidedef.Fields.GetValue("light", 0);
				if(!v.Sidedef.Fields.GetValue("lightabsolute", false)) {
					targetBrightness += v.Sidedef.Sector.Brightness;
				}
			} else if(highlighted is VisualMiddle3D) {
				VisualMiddle3D v = highlighted as VisualMiddle3D;
				Sidedef sd = v.GetControlLinedef().Front;

				if (sd == null) {
					General.Interface.DisplayStatus(StatusType.Warning, "Highlight a surface, to which you want to match the brightness.");
					return;
				}
				targetBrightness = sd.Fields.GetValue("light", 0);
				if(!sd.Fields.GetValue("lightabsolute", false)) {
					targetBrightness += sd.Sector.Brightness;
				}

			} else {
				General.Interface.DisplayStatus(StatusType.Warning, "Highlight a surface, to which you want to match the brightness.");
				return;
			}

			//make undo
			CreateUndo("Match Brightness");
			targetBrightness = General.Clamp(targetBrightness, 0, 255);

			//apply new brightness
			foreach (IVisualEventReceiver obj in selectedobjects) {
				if(obj == highlighted) continue;

				if(obj is VisualFloor) {
					VisualFloor v = obj as VisualFloor;
					v.Level.sector.Fields.BeforeFieldsChange();
					v.Sector.Changed = true;

					if (v.Level.sector.Fields.GetValue("lightfloorabsolute", false)) {
						v.Level.sector.Fields["lightfloor"] = new UniValue(UniversalType.Integer, targetBrightness);
					} else {
						v.Level.sector.Fields["lightfloor"] = new UniValue(UniversalType.Integer, targetBrightness - v.Level.sector.Brightness);
					}

					v.Sector.UpdateSectorGeometry(false);

				} else if(obj is VisualCeiling) {
					VisualCeiling v = obj as VisualCeiling;
					v.Level.sector.Fields.BeforeFieldsChange();
					v.Sector.Changed = true;

					if(v.Level.sector.Fields.GetValue("lightceilingabsolute", false)) {
						v.Level.sector.Fields["lightceiling"] = new UniValue(UniversalType.Integer, targetBrightness);
					} else {
						v.Level.sector.Fields["lightceiling"] = new UniValue(UniversalType.Integer, targetBrightness - v.Level.sector.Brightness);
					}

					v.Sector.UpdateSectorGeometry(false);

				} else if(obj is VisualUpper || obj is VisualMiddleSingle || obj is VisualMiddleDouble || obj is VisualLower) {
					BaseVisualGeometrySidedef v = obj as BaseVisualGeometrySidedef;
					v.Sidedef.Fields.BeforeFieldsChange();
					v.Sector.Changed = true;

					if (v.Sidedef.Fields.GetValue("lightabsolute", false)) {
						v.Sidedef.Fields["light"] = new UniValue(UniversalType.Integer, targetBrightness);
					} else {
						v.Sidedef.Fields["light"] = new UniValue(UniversalType.Integer, targetBrightness - v.Sidedef.Sector.Brightness);
					}
				}
			}

			//done
			General.Interface.DisplayStatus(StatusType.Action, "Matched brightness for " + selectedobjects.Count + " surfaces.");
			Interface_OnSectorEditFormValuesChanged(this, EventArgs.Empty);
		}

		[BeginAction("showvisualthings")]
		public void ShowVisualThings()
		{
			BuilderPlug.Me.ShowVisualThings++;
			if(BuilderPlug.Me.ShowVisualThings > 2) BuilderPlug.Me.ShowVisualThings = 0;
		}

		[BeginAction("raisebrightness8")]
		public void RaiseBrightness8()
		{
			PreAction(UndoGroup.SectorBrightnessChange);
			List<IVisualEventReceiver> objs = GetSelectedObjects(true, true, false, false);
			foreach(IVisualEventReceiver i in objs) i.OnChangeTargetBrightness(true);
			PostAction();
		}

		[BeginAction("lowerbrightness8")]
		public void LowerBrightness8()
		{
			PreAction(UndoGroup.SectorBrightnessChange);
			List<IVisualEventReceiver> objs = GetSelectedObjects(true, true, false, false);
			foreach(IVisualEventReceiver i in objs) i.OnChangeTargetBrightness(false);
			PostAction();
		}

		[BeginAction("movetextureleft")]
		public void MoveTextureLeft1()
		{
			PreAction(UndoGroup.TextureOffsetChange);
			List<IVisualEventReceiver> objs = GetSelectedObjects(true, true, false, false);
			foreach (IVisualEventReceiver i in objs) i.OnChangeTextureOffset(-1, 0, true);
			PostAction();
		}

		[BeginAction("movetextureright")]
		public void MoveTextureRight1()
		{
			PreAction(UndoGroup.TextureOffsetChange);
			List<IVisualEventReceiver> objs = GetSelectedObjects(true, true, false, false);
			foreach (IVisualEventReceiver i in objs) i.OnChangeTextureOffset(1, 0, true);
			PostAction();
		}

		[BeginAction("movetextureup")]
		public void MoveTextureUp1()
		{
			PreAction(UndoGroup.TextureOffsetChange);
			List<IVisualEventReceiver> objs = GetSelectedObjects(true, true, false, false);
			foreach (IVisualEventReceiver i in objs) i.OnChangeTextureOffset(0, -1, true);
			PostAction();
		}

		[BeginAction("movetexturedown")]
		public void MoveTextureDown1()
		{
			PreAction(UndoGroup.TextureOffsetChange);
			List<IVisualEventReceiver> objs = GetSelectedObjects(true, true, false, false);
			foreach (IVisualEventReceiver i in objs) i.OnChangeTextureOffset(0, 1, true);
			PostAction();
		}

		[BeginAction("movetextureleft8")]
		public void MoveTextureLeft8()
		{
			PreAction(UndoGroup.TextureOffsetChange);
			List<IVisualEventReceiver> objs = GetSelectedObjects(true, true, false, false);
			foreach(IVisualEventReceiver i in objs) i.OnChangeTextureOffset(-General.Map.Grid.GridSize, 0, true);
			PostAction();
		}

		[BeginAction("movetextureright8")]
		public void MoveTextureRight8()
		{
			PreAction(UndoGroup.TextureOffsetChange);
			List<IVisualEventReceiver> objs = GetSelectedObjects(true, true, false, false);
			foreach (IVisualEventReceiver i in objs) i.OnChangeTextureOffset(General.Map.Grid.GridSize, 0, true);
			PostAction();
		}

		[BeginAction("movetextureup8")]
		public void MoveTextureUp8()
		{
			PreAction(UndoGroup.TextureOffsetChange);
			List<IVisualEventReceiver> objs = GetSelectedObjects(true, true, false, false);
			foreach(IVisualEventReceiver i in objs) i.OnChangeTextureOffset(0, -General.Map.Grid.GridSize, true);
			PostAction();
		}

		[BeginAction("movetexturedown8")]
		public void MoveTextureDown8()
		{
			PreAction(UndoGroup.TextureOffsetChange);
			List<IVisualEventReceiver> objs = GetSelectedObjects(true, true, false, false);
			foreach(IVisualEventReceiver i in objs) i.OnChangeTextureOffset(0, General.Map.Grid.GridSize, true);
			PostAction();
		}

		//mxd
		[BeginAction("scaletextureupx")]
		public void ScaleTextureUpX() {
			PreAction(UndoGroup.TextureScaleChange);
			List<IVisualEventReceiver> objs = GetSelectedObjects(true, true, false, false);
			foreach(IVisualEventReceiver i in objs) i.OnChangeTextureScale(-0.1f, 0);
			PostAction();
		}

		//mxd
		[BeginAction("scaletexturedownx")]
		public void ScaleTextureDownX() {
			PreAction(UndoGroup.TextureScaleChange);
			List<IVisualEventReceiver> objs = GetSelectedObjects(true, true, false, false);
			foreach(IVisualEventReceiver i in objs) i.OnChangeTextureScale(0.1f, 0);
			PostAction();
		}

		//mxd
		[BeginAction("scaletextureupy")]
		public void ScaleTextureUpY() {
			PreAction(UndoGroup.TextureScaleChange);
			List<IVisualEventReceiver> objs = GetSelectedObjects(true, true, false, false);
			foreach(IVisualEventReceiver i in objs) i.OnChangeTextureScale(0, 0.1f);
			PostAction();
		}

		//mxd
		[BeginAction("scaletexturedowny")]
		public void ScaleTextureDownY() {
			PreAction(UndoGroup.TextureScaleChange);
			List<IVisualEventReceiver> objs = GetSelectedObjects(true, true, false, false);
			foreach(IVisualEventReceiver i in objs) i.OnChangeTextureScale(0, -0.1f);
			PostAction();
		}

		[BeginAction("textureselect")]
		public void TextureSelect()
		{
			PreAction(UndoGroup.None);
			renderer.SetCrosshairBusy(true);
			General.Interface.RedrawDisplay();
			GetTargetEventReceiver(false).OnSelectTexture();
			UpdateChangedObjects();
			renderer.SetCrosshairBusy(false);
			PostAction();
		}

		[BeginAction("texturecopy")]
		public void TextureCopy()
		{
			PreActionNoChange();
			GetTargetEventReceiver(true).OnCopyTexture(); //mxd
			PostAction();
		}

		[BeginAction("texturepaste")]
		public void TexturePaste()
		{
			PreAction(UndoGroup.None);
			List<IVisualEventReceiver> objs = GetSelectedObjects(true, true, false, false);
			foreach(IVisualEventReceiver i in objs) i.OnPasteTexture();
			PostAction();
		}

		//mxd
		[BeginAction("visualautoalign")]
		public void TextureAutoAlign() {
			PreAction(UndoGroup.None);
			renderer.SetCrosshairBusy(true);
			General.Interface.RedrawDisplay();
			GetTargetEventReceiver(false).OnTextureAlign(true, true);
			UpdateChangedObjects();
			renderer.SetCrosshairBusy(false);
			PostAction();
		}

		[BeginAction("visualautoalignx")]
		public void TextureAutoAlignX()
		{
			PreAction(UndoGroup.None);
			renderer.SetCrosshairBusy(true);
			General.Interface.RedrawDisplay();
			GetTargetEventReceiver(false).OnTextureAlign(true, false);
			UpdateChangedObjects();
			renderer.SetCrosshairBusy(false);
			PostAction();
		}

		[BeginAction("visualautoaligny")]
		public void TextureAutoAlignY()
		{
			PreAction(UndoGroup.None);
			renderer.SetCrosshairBusy(true);
			General.Interface.RedrawDisplay();
			GetTargetEventReceiver(false).OnTextureAlign(false, true);
			UpdateChangedObjects();
			renderer.SetCrosshairBusy(false);
			PostAction();
		}

		//mxd
		[BeginAction("visualautoaligntoselection")]
		public void TextureAlignToSelected() {
			PreAction(UndoGroup.None);
			renderer.SetCrosshairBusy(true);
			General.Interface.RedrawDisplay();

			autoAlignTexturesToSelected(true, true);

			UpdateChangedObjects();
			renderer.SetCrosshairBusy(false);
			PostAction();
		}

		//mxd
		[BeginAction("visualautoaligntoselectionx")]
		public void TextureAlignToSelectedX() {
			PreAction(UndoGroup.None);
			renderer.SetCrosshairBusy(true);
			General.Interface.RedrawDisplay();

			autoAlignTexturesToSelected(true, false);

			UpdateChangedObjects();
			renderer.SetCrosshairBusy(false);
			PostAction();
		}

		//mxd
		[BeginAction("visualautoaligntoselectiony")]
		public void TextureAlignToSelectedY() {
			PreAction(UndoGroup.None);
			renderer.SetCrosshairBusy(true);
			General.Interface.RedrawDisplay();

			autoAlignTexturesToSelected(false, true);

			UpdateChangedObjects();
			renderer.SetCrosshairBusy(false);
			PostAction();
		}

		//mxd
		private void autoAlignTexturesToSelected(bool alignX, bool alignY) {
			string rest;
			if(alignX && alignY) rest = "(X and Y)";
			else if(alignX) rest = "(X)";
			else rest = "(Y)";

			CreateUndo("Auto-align textures to selected sidedefs " + rest);
			SetActionResult("Auto-aligned textures to selected sidedefs " + rest + ".");

			// Clear all marks, this will align everything it can
			General.Map.Map.ClearMarkedSidedefs(false);
			
			//get selection
			List<IVisualEventReceiver> objs = GetSelectedObjects(false, true, false, false);

			//align
			foreach(IVisualEventReceiver i in objs) {
				BaseVisualGeometrySidedef side = i as BaseVisualGeometrySidedef;
				
				// Make sure the texture is loaded (we need the texture size)
				if(!side.Texture.IsImageLoaded) side.Texture.LoadImage();

				//Align textures
				AutoAlignTextures(side, side.Texture, alignX, alignY, false, false);

				// Get the changed sidedefs
				List<Sidedef> changes = General.Map.Map.GetMarkedSidedefs(true);

				foreach(Sidedef sd in changes) {
					// Update the parts for this sidedef!
					if(VisualSectorExists(sd.Sector)) {
						BaseVisualSector vs = (GetVisualSector(sd.Sector) as BaseVisualSector);
						VisualSidedefParts parts = vs.GetSidedefParts(sd);
						parts.SetupAllParts();
					}
				}
			}
		}

		//mxd
		[BeginAction("visualfittextures")]
		public void TextureFit() {
			PreAction(UndoGroup.None);
			List<IVisualEventReceiver> objs = GetSelectedObjects(false, true, false, false);
			foreach(IVisualEventReceiver i in objs) i.OnTextureFit(true, true);
			PostAction();
		}

		//mxd
		[BeginAction("visualfittexturesx")]
		public void TextureFitX() {
			PreAction(UndoGroup.None);
			List<IVisualEventReceiver> objs = GetSelectedObjects(false, true, false, false);
			foreach(IVisualEventReceiver i in objs) i.OnTextureFit(true, false);
			PostAction();
		}

		//mxd
		[BeginAction("visualfittexturesy")]
		public void TextureFitY() {
			PreAction(UndoGroup.None);
			List<IVisualEventReceiver> objs = GetSelectedObjects(false, true, false, false);
			foreach(IVisualEventReceiver i in objs) i.OnTextureFit(false, true);
			PostAction();
		}

		[BeginAction("toggleupperunpegged")]
		public void ToggleUpperUnpegged()
		{
			PreAction(UndoGroup.None);
			GetTargetEventReceiver(false).OnToggleUpperUnpegged();
			PostAction();
		}

		[BeginAction("togglelowerunpegged")]
		public void ToggleLowerUnpegged()
		{
			PreAction(UndoGroup.None);
			GetTargetEventReceiver(false).OnToggleLowerUnpegged();
			PostAction();
		}

		[BeginAction("togglegravity")]
		public void ToggleGravity()
		{
			BuilderPlug.Me.UseGravity = !BuilderPlug.Me.UseGravity;
			string onoff = BuilderPlug.Me.UseGravity ? "ON" : "OFF";
			General.Interface.DisplayStatus(StatusType.Action, "Gravity is now " + onoff + ".");
		}

		[BeginAction("togglehighlight")]
		public void ToggleHighlight()
		{
			BuilderPlug.Me.UseHighlight = !BuilderPlug.Me.UseHighlight;
			string onoff = BuilderPlug.Me.UseHighlight ? "ON" : "OFF";
			General.Interface.DisplayStatus(StatusType.Action, "Highlight is now " + onoff + ".");
		}

		[BeginAction("resettexture")]
		public void ResetTexture()
		{
			PreAction(UndoGroup.None);
			List<IVisualEventReceiver> objs = GetSelectedObjects(true, true, false, false);
			foreach(IVisualEventReceiver i in objs) i.OnResetTextureOffset();
			PostAction();
		}

		[BeginAction("resettextureudmf")]
		public void ResetLocalOffsets() {
			PreAction(UndoGroup.None);
			List<IVisualEventReceiver> objs = GetSelectedObjects(true, true, false, false);
			foreach(IVisualEventReceiver i in objs) i.OnResetLocalTextureOffset();
			PostAction();
		}

		[BeginAction("floodfilltextures")]
		public void FloodfillTextures()
		{
			PreAction(UndoGroup.None);
			GetTargetEventReceiver(false).OnTextureFloodfill();
			PostAction();
		}

		[BeginAction("texturecopyoffsets")]
		public void TextureCopyOffsets()
		{
			PreActionNoChange();
			GetTargetEventReceiver(true).OnCopyTextureOffsets(); //mxd
			PostAction();
		}

		[BeginAction("texturepasteoffsets")]
		public void TexturePasteOffsets()
		{
			PreAction(UndoGroup.None);
			List<IVisualEventReceiver> objs = GetSelectedObjects(true, true, false, false);
			foreach(IVisualEventReceiver i in objs) i.OnPasteTextureOffsets();
			PostAction();
		}

		[BeginAction("copyproperties")]
		public void CopyProperties()
		{
			PreActionNoChange();
			GetTargetEventReceiver(true).OnCopyProperties(); //mxd
			PostAction();
		}

		[BeginAction("pasteproperties")]
		public void PasteProperties()
		{
			PreAction(UndoGroup.None);
			List<IVisualEventReceiver> objs = GetSelectedObjects(true, true, true, true);
			foreach(IVisualEventReceiver i in objs) i.OnPasteProperties();
			PostAction();
		}

		//mxd. now we can insert things in Visual modes
		[BeginAction("insertitem", BaseAction = true)] 
		public void InsertThing()
		{
			Vector2D hitpos = GetHitPosition();

			if (!hitpos.IsFinite()) {
				General.Interface.DisplayStatus(StatusType.Warning, "Cannot insert thing here!");
				return;
			}
			
			ClearSelection();
			PreActionNoChange();
			General.Map.UndoRedo.ClearAllRedos();
			General.Map.UndoRedo.CreateUndo("Insert thing");

			Thing t = CreateThing(new Vector2D(hitpos.x, hitpos.y));

			if (t == null) {
				General.Map.UndoRedo.WithdrawUndo();
				return;
			}

			// Edit the thing?
			if (BuilderPlug.Me.EditNewThing)
				General.Interface.ShowEditThings(new List<Thing> { t });

			//add thing to blockmap
			blockmap.AddThing(t);

			General.Interface.DisplayStatus(StatusType.Action, "Inserted a new thing.");
			PostAction();
		}

		//mxd
		[BeginAction("deleteitem", BaseAction = true)]
		public void Delete()
		{
			PreAction(UndoGroup.None);
			List<IVisualEventReceiver> objs = GetSelectedObjects(true, true, true, true);
			foreach(IVisualEventReceiver i in objs) i.OnDelete();
			PostAction();

			ClearSelection();
		}

		//mxd
		[BeginAction("copyselection", BaseAction = true)]
		public void CopySelection() {
			List<IVisualEventReceiver> objs = GetSelectedObjects(false, false, true, false);
			if (objs.Count == 0) return;

			copyBuffer.Clear();
			foreach (IVisualEventReceiver i in objs) {
				VisualThing vt = i as VisualThing;
				if (vt != null) copyBuffer.Add(new ThingCopyData(vt.Thing));
			}
			General.Interface.DisplayStatus(StatusType.Info, "Copied " + copyBuffer.Count + " Things");
		}

		//mxd
		[BeginAction("cutselection", BaseAction = true)]
		public void CutSelection() {
			CopySelection();

			//Create undo
			string rest = copyBuffer.Count + " thing" + (copyBuffer.Count > 1 ? "s." : ".");
			CreateUndo("Cut " + rest);
			General.Interface.DisplayStatus(StatusType.Info, "Cut " + rest);

			List<IVisualEventReceiver> objs = GetSelectedObjects(false, false, true, false);
			foreach (IVisualEventReceiver i in objs) {
				BaseVisualThing thing = i as BaseVisualThing;
				thing.Thing.Fields.BeforeFieldsChange();
				thing.Thing.Dispose();
				thing.Dispose();
			}

			General.Map.IsChanged = true;
			General.Map.ThingsFilter.Update();
		}

		//mxd. We'll just use currently selected objects 
		[BeginAction("pasteselection", BaseAction = true)]
		public void PasteSelection() {
			if(copyBuffer.Count == 0){
				General.Interface.DisplayStatus(StatusType.Warning, "Nothing to paste, cut or copy some Things first!");
				return;
			}
			
			Vector2D hitpos = GetHitPosition();

			if (!hitpos.IsFinite()) {
				General.Interface.DisplayStatus(StatusType.Warning, "Cannot paste here!");
				return;
			}

			string rest = copyBuffer.Count + " thing" + (copyBuffer.Count > 1 ? "s." : ".");
			General.Map.UndoRedo.CreateUndo("Paste " + rest);
			General.Interface.DisplayStatus(StatusType.Info, "Pasted " + rest);
			
			PreActionNoChange();
			ClearSelection();

			//get translated positions
			Vector3D[] coords = new Vector3D[copyBuffer.Count];
			for (int i = 0; i < copyBuffer.Count; i++ )
				coords[i] = copyBuffer[i].Position;

			Vector3D[] translatedCoords = translateCoordinates(coords, hitpos, true);

			//create things from copyBuffer
			for (int i = 0; i < copyBuffer.Count; i++) {
				Thing t = CreateThing(new Vector2D());
				if (t != null) {
					copyBuffer[i].ApplyTo(t);
					t.Move(translatedCoords[i]);
					//add thing to blockmap
					blockmap.AddThing(t);
				}
			}
			PostAction();
		}

		//mxd. rotate clockwise
		[BeginAction("rotateclockwise")]
		public void RotateCW() {
			rotateThingsAndTextures(5);
		}

		//mxd. rotate counterclockwise
		[BeginAction("rotatecounterclockwise")]
		public void RotateCCW() {
			rotateThingsAndTextures(-5);
		}

		//mxd
		private void rotateThingsAndTextures(int increment) {
			PreAction(UndoGroup.ThingRotate);

			List<IVisualEventReceiver> selection = GetSelectedObjects(true, false, true, false);
			if(selection.Count == 0) return;

			foreach(IVisualEventReceiver obj in selection) {
				if(obj is BaseVisualThing) {
					BaseVisualThing t = obj as BaseVisualThing;
					t.Rotate(General.ClampAngle(t.Thing.AngleDoom + increment));
				}else if(obj is VisualFloor) {
					VisualFloor vf = obj as VisualFloor;
					vf.OnChangeTextureRotation(General.ClampAngle(vf.GetControlSector().Fields.GetValue("rotationfloor", 0.0f) + increment));
				} else if(obj is VisualCeiling) {
					VisualCeiling vc = obj as VisualCeiling;
					vc.OnChangeTextureRotation(General.ClampAngle(vc.GetControlSector().Fields.GetValue("rotationceiling", 0.0f) + increment));
				}
			}

			PostAction();
		}

		//mxd
		[BeginAction("togglegzdoomrenderingeffects")]
		public void ToggleGZDoomRenderingEffects() {
			gzdoomRenderingEffects = !gzdoomRenderingEffects;
			RebuildElementData();
			UpdateChangedObjects();
			General.Interface.DisplayStatus(StatusType.Info, "(G)ZDoom rendering effects are " + (gzdoomRenderingEffects ? "ENABLED" : "DISABLED"));
		}

		//mxd
		[BeginAction("thingaligntowall")]
		public void AlignThingsToWall() {
			List<VisualThing> visualThings = GetSelectedVisualThings(true);

			if(visualThings.Count == 0) {
				General.Interface.DisplayStatus(StatusType.Warning, "This action requires selected Things!");
				return;
			}

			List<Thing> things = new List<Thing>();

			foreach(VisualThing vt in visualThings)
				things.Add(vt.Thing);

			// Make undo
			if(things.Count > 1) {
				General.Map.UndoRedo.CreateUndo("Align " + things.Count + " things");
				General.Interface.DisplayStatus(StatusType.Action, "Aligned " + things.Count + " things.");
			} else {
				General.Map.UndoRedo.CreateUndo("Align thing");
				General.Interface.DisplayStatus(StatusType.Action, "Aligned a thing.");
			}

			//align things
			int thingsCount = General.Map.Map.Things.Count;

			foreach(Thing t in things) {
				List<Linedef> excludedLines = new List<Linedef>();
				bool aligned;

				do {
					Linedef l = General.Map.Map.NearestLinedef(t.Position, excludedLines);
					aligned = Tools.TryAlignThingToLine(t, l);

					if(!aligned) {
						excludedLines.Add(l);

						if(excludedLines.Count == thingsCount) {
							ThingTypeInfo tti = General.Map.Data.GetThingInfo(t.Type);
							General.ErrorLogger.Add(ErrorType.Warning, "Unable to align Thing ¹" + t.Index + " (" + tti.Title + ") to any linedef in a map!");
							aligned = true;
						}
					}
				} while(!aligned);
			}

			//apply changes to Visual Things
			for(int i = 0; i < visualThings.Count; i++) {
				BaseVisualThing t = visualThings[i] as BaseVisualThing;
				t.Changed = true;

				// Update what must be updated
				ThingData td = GetThingData(t.Thing);
				foreach(KeyValuePair<Sector, bool> s in td.UpdateAlso) {
					if(VisualSectorExists(s.Key)) {
						BaseVisualSector vs = (BaseVisualSector)GetVisualSector(s.Key);
						vs.UpdateSectorGeometry(s.Value);
					}
				}
			}

			UpdateChangedObjects();
			ShowTargetInfo();
		}

		//mxd
		[BeginAction("lookthroughthing")]
		public void LookThroughThing() {
			List<VisualThing> visualThings = GetSelectedVisualThings(true);

			if(visualThings.Count != 1) {
				General.Interface.DisplayStatus(StatusType.Warning, "Look Through Selection action requires 1 selected Thing!");
				return;
			}

			//set position and angles
			Thing t = visualThings[0].Thing;
			if((t.Type == 9072 || t.Type == 9073) && t.Args[3] > 0) { //AimingCamera or MovingCamera with target?
				//position
				if(t.Type == 9072 && (t.Args[0] > 0 || t.Args[1] > 0)) { //positon MovingCamera at targeted interpolation point
					int ipTag = t.Args[0] + (t.Args[1] << 8);

					Thing ip = null;

					//find interpolation point
					foreach(Thing tgt in General.Map.Map.Things) {
						if(tgt.Tag == ipTag && tgt.Type == 9070) {
							ip = tgt;
							break;
						}
					}

					if(ip != null) {
						VisualThing vTarget = !VisualThingExists(ip) ? CreateVisualThing(ip) : GetVisualThing(ip);
						Vector3D targetPos;
						if(vTarget == null) {
							targetPos = ip.Position;
							if(ip.Sector != null) targetPos.z += ip.Sector.FloorHeight;
						} else {
							targetPos = vTarget.CenterV3D;
						}

						General.Map.VisualCamera.Position = targetPos; //position at interpolation point
					} else {
						General.Map.VisualCamera.Position = visualThings[0].CenterV3D; //position at camera
					}

				}else{
					General.Map.VisualCamera.Position = visualThings[0].CenterV3D; //position at camera
				}

				//angle
				Thing target = null;

				foreach(Thing tgt in General.Map.Map.Things) {
					if(tgt.Tag == t.Args[3]) {
						target = tgt;
						break;
					}
				}

				if (target == null) {
					General.Interface.DisplayStatus(StatusType.Warning, "Camera target with Tag " + t.Args[3] + " does not exist!");
					General.Map.VisualCamera.AngleXY = t.Angle - Angle2D.PI;
					General.Map.VisualCamera.AngleZ = Angle2D.PI;
				} else {
					VisualThing vTarget = !VisualThingExists(target) ? CreateVisualThing(target) : GetVisualThing(target);
					Vector3D targetPos;
					if(vTarget == null) {
						targetPos = target.Position;
						if(target.Sector != null) targetPos.z += target.Sector.FloorHeight;
					} else {
						targetPos = vTarget.CenterV3D;
					}

					bool pitch = (t.Args[2] & 4) != 0;
					Vector3D delta = General.Map.VisualCamera.Position - targetPos;
					General.Map.VisualCamera.AngleXY = delta.GetAngleXY();
					General.Map.VisualCamera.AngleZ = pitch ? -delta.GetAngleZ() : Angle2D.PI;
				}
			} else if((t.Type == 9025 || t.Type == 9073 || t.Type == 9070) && t.Args[0] != 0) { //InterpolationPoint, SecurityCamera or AimingCamera with pitch?
				General.Map.VisualCamera.Position = visualThings[0].CenterV3D; //position at camera
				General.Map.VisualCamera.AngleXY = t.Angle - Angle2D.PI;
				General.Map.VisualCamera.AngleZ = Angle2D.PI + Angle2D.DegToRad(t.Args[0]);
			} else { //nope, just a generic thing
				General.Map.VisualCamera.Position = visualThings[0].CenterV3D; //position at thing
				General.Map.VisualCamera.AngleXY = t.Angle - Angle2D.PI;
				General.Map.VisualCamera.AngleZ = Angle2D.PI;
			}
		}

		//mxd
		[BeginAction("toggleslope")]
		public void ToggleSlope() {
			List<VisualGeometry> selection = GetSelectedSurfaces();

			if(selection.Count == 0) {
				General.Interface.DisplayStatus(StatusType.Warning, "Toggle Slope action requires selected surfaces!");
				return;
			}

			bool update;
			List<BaseVisualSector> toUpdate = new List<BaseVisualSector>();
			General.Map.UndoRedo.CreateUndo("Toggle Slope");

			//check selection
			foreach(VisualGeometry vg in selection) {
				update = false;

				//assign/remove action
				if(vg.GeometryType == VisualGeometryType.WALL_LOWER) {
					if(vg.Sidedef.Line.Action == 0 || (vg.Sidedef.Line.Action == 181 && vg.Sidedef.Line.Args[0] == 0)) {
						//check if the sector already has floor slopes
						foreach(Sidedef side in vg.Sidedef.Sector.Sidedefs) {
							if(side == vg.Sidedef || side.Line.Action != 181) continue;

							int arg = (side == side.Line.Front ? 1 : 2);

							if(side.Line.Args[0] == arg) {
								//if only floor is affected, remove action
								if(side.Line.Args[1] == 0)
									side.Line.Action = 0;
								else //clear floor alignment
									side.Line.Args[0] = 0;
							}
						}

						//set action
						vg.Sidedef.Line.Action = 181;
						vg.Sidedef.Line.Args[0] = (vg.Sidedef == vg.Sidedef.Line.Front ? 1 : 2);
						update = true;
					}
				} else if(vg.GeometryType == VisualGeometryType.WALL_UPPER) {
					if(vg.Sidedef.Line.Action == 0 || (vg.Sidedef.Line.Action == 181 && vg.Sidedef.Line.Args[1] == 0)) {
						//check if the sector already has ceiling slopes
						foreach(Sidedef side in vg.Sidedef.Sector.Sidedefs) {
							if(side == vg.Sidedef || side.Line.Action != 181) continue;

							int arg = (side == side.Line.Front ? 1 : 2);

							if(side.Line.Args[1] == arg) {
								//if only ceiling is affected, remove action
								if(side.Line.Args[0] == 0)
									side.Line.Action = 0;
								else //clear ceiling alignment
									side.Line.Args[1] = 0;
							}
						}

						//set action
						vg.Sidedef.Line.Action = 181;
						vg.Sidedef.Line.Args[1] = (vg.Sidedef == vg.Sidedef.Line.Front ? 1 : 2);
						update = true;
					}
				} else if(vg.GeometryType == VisualGeometryType.CEILING) {
					//check if the sector has ceiling slopes
					foreach(Sidedef side in vg.Sector.Sector.Sidedefs) {
						if(side.Line.Action != 181)	continue;

						int arg = (side == side.Line.Front ? 1 : 2);

						if(side.Line.Args[1] == arg) {
							//if only ceiling is affected, remove action
							if(side.Line.Args[0] == 0)
								side.Line.Action = 0;
							else //clear ceiling alignment
								side.Line.Args[1] = 0;

							update = true;
						}
					}
				} else if(vg.GeometryType == VisualGeometryType.FLOOR) {
					//check if the sector has floor slopes
					foreach(Sidedef side in vg.Sector.Sector.Sidedefs) {
						if(side.Line.Action != 181)	continue;

						int arg = (side == side.Line.Front ? 1 : 2);

						if(side.Line.Args[0] == arg) {
							//if only floor is affected, remove action
							if(side.Line.Args[1] == 0)
								side.Line.Action = 0;
							else //clear floor alignment
								side.Line.Args[0] = 0;

							update = true;
						}
					}
				}

				//add to update list
				if(update) toUpdate.Add(vg.Sector as BaseVisualSector);
			}

			//update changed geometry
			if(toUpdate.Count > 0) {
				RebuildElementData();

				foreach(BaseVisualSector vs in toUpdate)
					vs.UpdateSectorGeometry(true);

				UpdateChangedObjects();
				ClearSelection();
				ShowTargetInfo();
			}

			General.Interface.DisplayStatus(StatusType.Action, "Toggled Slope for " + toUpdate.Count + (toUpdate.Count == 1 ? " surface." : " surfaces."));
		}
		
		#endregion

		#region ================== Texture Alignment

		//mxd. If checkSelectedSidedefParts is set to true, only selected linedef parts will be aligned (when a sidedef has both top and bottom parts, but only bottom is selected, top texture won't be aligned)
		internal void AutoAlignTextures(BaseVisualGeometrySidedef start, ImageData texture, bool alignx, bool aligny, bool resetsidemarks, bool checkSelectedSidedefParts) {
			if(General.Map.UDMF)
				autoAlignTexturesUDMF(start, texture, alignx, aligny, resetsidemarks, checkSelectedSidedefParts);
			else
				autoAlignTextures(start, texture, alignx, aligny, resetsidemarks);
		}

		//mxd. Moved here from Tools
		// This performs texture alignment along all walls that match with the same texture
		// NOTE: This method uses the sidedefs marking to indicate which sides have been aligned
		// When resetsidemarks is set to true, all sidedefs will first be marked false (not aligned).
		// Setting resetsidemarks to false is usefull to align only within a specific selection
		// (set the marked property to true for the sidedefs outside the selection)
		private void autoAlignTextures(BaseVisualGeometrySidedef start, ImageData texture, bool alignx, bool aligny, bool resetsidemarks) {
			Stack<SidedefAlignJob> todo = new Stack<SidedefAlignJob>(50);
			float scalex = (General.Map.Config.ScaledTextureOffsets && !texture.WorldPanning) ? texture.Scale.x : 1.0f;
			float scaley = (General.Map.Config.ScaledTextureOffsets && !texture.WorldPanning) ? texture.Scale.y : 1.0f;

			// Mark all sidedefs false (they will be marked true when the texture is aligned).
			if(resetsidemarks) General.Map.Map.ClearMarkedSidedefs(false);

			// Begin with first sidedef
			SidedefAlignJob first = new SidedefAlignJob();
			first.sidedef = start.Sidedef;
			first.offsetx = start.Sidedef.OffsetX;
			int ystartalign = start.Sidedef.OffsetY; //mxd

			//mxd
			if(start.GeometryType == VisualGeometryType.WALL_MIDDLE_3D) {
				first.controlSide = start.GetControlLinedef().Front;
				first.offsetx += first.controlSide.OffsetX;
				ystartalign += first.controlSide.OffsetY;
			} else {
				first.controlSide = start.Sidedef;
			}

			first.forward = true;
			todo.Push(first);

			// Continue until nothing more to align
			while(todo.Count > 0) {
				// Get the align job to do
				SidedefAlignJob j = todo.Pop();

				if(j.forward) {
					// Apply alignment
					if(alignx)
						j.controlSide.OffsetX = (int)j.offsetx;
					if(aligny)
						j.sidedef.OffsetY = (int)Math.Round((first.ceilingHeight - j.ceilingHeight) / scaley) + ystartalign;
					int forwardoffset = (int)j.offsetx + (int)Math.Round(j.sidedef.Line.Length / scalex);
					int backwardoffset = (int)j.offsetx;

					j.sidedef.Marked = true;

					// Wrap the value within the width of the texture (to prevent ridiculous values)
					// NOTE: We don't use ScaledWidth here because the texture offset is in pixels, not mappixels
					if(texture.IsImageLoaded) {
						if(alignx) j.sidedef.OffsetX %= texture.Width;
						if(aligny) j.sidedef.OffsetY %= texture.Height;
					}

					// Add sidedefs forward (connected to the right vertex)
					Vertex v = j.sidedef.IsFront ? j.sidedef.Line.End : j.sidedef.Line.Start;
					AddSidedefsForAlignment(todo, v, true, forwardoffset, 1.0f, texture.LongName, false);

					// Add sidedefs backward (connected to the left vertex)
					v = j.sidedef.IsFront ? j.sidedef.Line.Start : j.sidedef.Line.End;
					AddSidedefsForAlignment(todo, v, false, backwardoffset, 1.0f, texture.LongName, false);
				} else {
					// Apply alignment
					if(alignx)
						j.controlSide.OffsetX = (int)j.offsetx - (int)Math.Round(j.sidedef.Line.Length / scalex);
					if(aligny)
						j.sidedef.OffsetY = (int)Math.Round((first.ceilingHeight - j.ceilingHeight) / scaley) + ystartalign;
					int forwardoffset = (int)j.offsetx;
					int backwardoffset = (int)j.offsetx - (int)Math.Round(j.sidedef.Line.Length / scalex);

					j.sidedef.Marked = true;

					// Wrap the value within the width of the texture (to prevent ridiculous values)
					// NOTE: We don't use ScaledWidth here because the texture offset is in pixels, not mappixels
					if(texture.IsImageLoaded) {
						if(alignx) j.sidedef.OffsetX %= texture.Width;
						if(aligny) j.sidedef.OffsetY %= texture.Height;
					}

					// Add sidedefs backward (connected to the left vertex)
					Vertex v = j.sidedef.IsFront ? j.sidedef.Line.Start : j.sidedef.Line.End;
					AddSidedefsForAlignment(todo, v, false, backwardoffset, 1.0f, texture.LongName, false);

					// Add sidedefs forward (connected to the right vertex)
					v = j.sidedef.IsFront ? j.sidedef.Line.End : j.sidedef.Line.Start;
					AddSidedefsForAlignment(todo, v, true, forwardoffset, 1.0f, texture.LongName, false);
				}
			}
		}

		//mxd. Moved here from GZDoomEditing plugin
		// This performs UDMF texture alignment along all walls that match with the same texture
		// NOTE: This method uses the sidedefs marking to indicate which sides have been aligned
		// When resetsidemarks is set to true, all sidedefs will first be marked false (not aligned).
		// Setting resetsidemarks to false is usefull to align only within a specific selection
		// (set the marked property to true for the sidedefs outside the selection)
		private void autoAlignTexturesUDMF(BaseVisualGeometrySidedef start, ImageData texture, bool alignx, bool aligny, bool resetsidemarks, bool checkSelectedSidedefParts) {
			// Mark all sidedefs false (they will be marked true when the texture is aligned)
			if(resetsidemarks) General.Map.Map.ClearMarkedSidedefs(false);
			if(!texture.IsImageLoaded) return;

			Stack<SidedefAlignJob> todo = new Stack<SidedefAlignJob>(50);
			float scalex = (General.Map.Config.ScaledTextureOffsets && !texture.WorldPanning) ? texture.Scale.x : 1.0f;
			float scaley = (General.Map.Config.ScaledTextureOffsets && !texture.WorldPanning) ? texture.Scale.y : 1.0f;

			SidedefAlignJob first = new SidedefAlignJob();
			first.sidedef = start.Sidedef;
			first.offsetx = start.Sidedef.OffsetX;

			if (start.GeometryType == VisualGeometryType.WALL_MIDDLE_3D)
				first.controlSide = start.GetControlLinedef().Front;
			else
				first.controlSide = start.Sidedef;

			//mxd
			List<BaseVisualGeometrySidedef> selectedVisualSides = new List<BaseVisualGeometrySidedef>();
			if(checkSelectedSidedefParts && !singleselection) {
				foreach(IVisualEventReceiver i in selectedobjects) {
					if(i is BaseVisualGeometrySidedef) {
						BaseVisualGeometrySidedef sd = i as BaseVisualGeometrySidedef;
						if(!selectedVisualSides.Contains(sd)) selectedVisualSides.Add(sd);
					}
				}
			}
			
			//mxd. scaleY
			switch(start.GeometryType) {
				case VisualGeometryType.WALL_UPPER:
					first.scaleY = start.Sidedef.Fields.GetValue("scaley_top", 1.0f);
					break;
				case VisualGeometryType.WALL_MIDDLE:
				case VisualGeometryType.WALL_MIDDLE_3D:
					first.scaleY = first.controlSide.Fields.GetValue("scaley_mid", 1.0f);
					break;
				case VisualGeometryType.WALL_LOWER:
					first.scaleY = start.Sidedef.Fields.GetValue("scaley_bottom", 1.0f);
					break;
			}

			// Determine the Y alignment
			float ystartalign = start.Sidedef.OffsetY;
			switch(start.GeometryType) {
				case VisualGeometryType.WALL_UPPER:
					ystartalign += Tools.GetSidedefTopOffsetY(start.Sidedef, start.Sidedef.Fields.GetValue("offsety_top", 0.0f), first.scaleY, false);//mxd
					break;
				case VisualGeometryType.WALL_MIDDLE:
					ystartalign += Tools.GetSidedefMiddleOffsetY(start.Sidedef, start.Sidedef.Fields.GetValue("offsety_mid", 0.0f), first.scaleY, false);//mxd
					break;
				case VisualGeometryType.WALL_MIDDLE_3D: //mxd. 3d-floors are not affected by Lower/Upper unpegged flags
					ystartalign += first.controlSide.OffsetY - (start.Sidedef.Sector.CeilHeight - first.ceilingHeight);
					ystartalign += start.Sidedef.Fields.GetValue("offsety_mid", 0.0f);
					ystartalign += first.controlSide.Fields.GetValue("offsety_mid", 0.0f);
					break;
				case VisualGeometryType.WALL_LOWER:
					ystartalign += Tools.GetSidedefBottomOffsetY(start.Sidedef, start.Sidedef.Fields.GetValue("offsety_bottom", 0.0f), first.scaleY, false);//mxd
					break;
			}

			// Begin with first sidedef
			switch(start.GeometryType) {
				case VisualGeometryType.WALL_UPPER:
					first.offsetx += start.Sidedef.Fields.GetValue("offsetx_top", 0.0f);
					break;
				case VisualGeometryType.WALL_MIDDLE:
					first.offsetx += start.Sidedef.Fields.GetValue("offsetx_mid", 0.0f);
					break;
				case VisualGeometryType.WALL_MIDDLE_3D: //mxd. Yup, 4 sets of texture offsets are used
					first.offsetx += start.Sidedef.Fields.GetValue("offsetx_mid", 0.0f);
					first.offsetx += first.controlSide.OffsetX;
					first.offsetx += first.controlSide.Fields.GetValue("offsetx_mid", 0.0f);
					break;
				case VisualGeometryType.WALL_LOWER:
					first.offsetx += start.Sidedef.Fields.GetValue("offsetx_bottom", 0.0f);
					break;
			}
			first.forward = true;
			todo.Push(first);

			// Continue until nothing more to align
			while(todo.Count > 0) {
				Vertex v;
				float forwardoffset;
				float backwardoffset;
				float offsetscalex = 1.0f;

				// Get the align job to do
				SidedefAlignJob j = todo.Pop();

				bool matchtop = (!j.sidedef.Marked && (j.sidedef.LongHighTexture == texture.LongName) && j.sidedef.HighRequired());
				bool matchbottom = (!j.sidedef.Marked && (j.sidedef.LongLowTexture == texture.LongName) && j.sidedef.LowRequired());
				bool matchmid = ((j.controlSide.LongMiddleTexture == texture.LongName) && (j.controlSide.MiddleRequired() || j.controlSide.LongMiddleTexture != MapSet.EmptyLongName)); //mxd

				//mxd. If there's a selection, check if matched part is actually selected
				if(checkSelectedSidedefParts && !singleselection) {
					if(matchtop) matchtop = sidePartIsSelected(selectedVisualSides, j.sidedef, VisualGeometryType.WALL_UPPER);
					if(matchbottom) matchbottom = sidePartIsSelected(selectedVisualSides, j.sidedef, VisualGeometryType.WALL_LOWER);
					if(matchmid) matchmid = sidePartIsSelected(selectedVisualSides, j.sidedef, VisualGeometryType.WALL_MIDDLE) || 
						sidePartIsSelected(selectedVisualSides, j.sidedef, VisualGeometryType.WALL_MIDDLE_3D);
				}

				if(!matchbottom && !matchtop && !matchmid) continue; //mxd

				if(matchtop)
					offsetscalex = j.sidedef.Fields.GetValue("scalex_top", 1.0f);
				else if(matchbottom)
					offsetscalex = j.sidedef.Fields.GetValue("scalex_bottom", 1.0f);
				else if(matchmid)
					offsetscalex = j.controlSide.Fields.GetValue("scalex_mid", 1.0f);
				
				j.sidedef.Fields.BeforeFieldsChange();
				j.controlSide.Fields.BeforeFieldsChange(); //mxd
				
				//mxd. Apply scaleY
				if(matchtop) UDMFTools.SetFloat(j.sidedef.Fields, "scaley_top", j.scaleY, 1.0f);
				if(matchmid) UDMFTools.SetFloat(j.controlSide.Fields, "scaley_mid", j.scaleY, 1.0f);
				if(matchbottom)	UDMFTools.SetFloat(j.sidedef.Fields, "scaley_bottom", j.scaleY, 1.0f);

				if(j.forward) {
					// Apply alignment
					if(alignx) {
						float offset = j.offsetx;
						offset -= j.sidedef.OffsetX;

						if(matchtop)
							j.sidedef.Fields["offsetx_top"] = new UniValue(UniversalType.Float, offset % texture.Width);
						if(matchbottom)
							j.sidedef.Fields["offsetx_bottom"] = new UniValue(UniversalType.Float, offset % texture.Width);
						if(matchmid) {
							if(j.sidedef.Index != j.controlSide.Index) { //mxd. if it's a part of 3d-floor 
								offset -= j.controlSide.OffsetX;
								offset -= j.controlSide.Fields.GetValue("offsetx_mid", 0.0f);
							}

							j.sidedef.Fields["offsetx_mid"] = new UniValue(UniversalType.Float, offset % texture.Width);
						}
					}

					if(aligny) {
						float offset = ((start.Sidedef.Sector.CeilHeight - j.ceilingHeight) / scaley) * j.scaleY + ystartalign; //mxd
						offset -= j.sidedef.OffsetY; //mxd
						offset = (float)Math.Round(offset); //mxd
						
						if(matchtop)
							j.sidedef.Fields["offsety_top"] = new UniValue(UniversalType.Float, Tools.GetSidedefTopOffsetY(j.sidedef, offset, j.scaleY, true) % texture.Height); //mxd
						if(matchbottom)
							j.sidedef.Fields["offsety_bottom"] = new UniValue(UniversalType.Float, Tools.GetSidedefBottomOffsetY(j.sidedef, offset, j.scaleY, true) % texture.Height); //mxd
						if(matchmid) {
							//mxd. Side is part of a 3D floor?
							if(j.sidedef.Index != j.controlSide.Index) {
								offset -= j.controlSide.OffsetY;
								offset -= j.controlSide.Fields.GetValue("offsety_mid", 0.0f);
								j.sidedef.Fields["offsety_mid"] = new UniValue(UniversalType.Float, offset % texture.Height);
							} else {
								offset = Tools.GetSidedefMiddleOffsetY(j.sidedef, offset, j.scaleY, true);

								//mxd. Clamp offset if this part is middle single or wrapped middle double 
								if(j.sidedef.Other == null || j.sidedef.IsFlagSet("wrapmidtex") || j.sidedef.Line.IsFlagSet("wrapmidtex")) {
									offset %= texture.Height;
								}

								j.sidedef.Fields["offsety_mid"] = new UniValue(UniversalType.Float, offset);//mxd
							}
						}
					}

					forwardoffset = j.offsetx + (int)Math.Round(j.sidedef.Line.Length / scalex * offsetscalex);
					backwardoffset = j.offsetx;

					// Done this sidedef
					j.sidedef.Marked = true;
					j.controlSide.Marked = true;

					// Add sidedefs backward (connected to the left vertex)
					v = j.sidedef.IsFront ? j.sidedef.Line.Start : j.sidedef.Line.End;
					AddSidedefsForAlignment(todo, v, false, backwardoffset, j.scaleY, texture.LongName, true);

					// Add sidedefs forward (connected to the right vertex)
					v = j.sidedef.IsFront ? j.sidedef.Line.End : j.sidedef.Line.Start;
					AddSidedefsForAlignment(todo, v, true, forwardoffset, j.scaleY, texture.LongName, true);
				} else {
					// Apply alignment
					if(alignx) {
						float offset = j.offsetx - (int)Math.Round(j.sidedef.Line.Length / scalex * offsetscalex);
						offset -= j.sidedef.OffsetX;

						if(matchtop)
							j.sidedef.Fields["offsetx_top"] = new UniValue(UniversalType.Float, offset % texture.Width);
						if(matchbottom)
							j.sidedef.Fields["offsetx_bottom"] = new UniValue(UniversalType.Float, offset % texture.Width);
						if(matchmid) {
							if(j.sidedef.Index != j.controlSide.Index) { //mxd
								offset -= j.controlSide.OffsetX;
								offset -= j.controlSide.Fields.GetValue("offsetx_mid", 0.0f);
							}

							j.sidedef.Fields["offsetx_mid"] = new UniValue(UniversalType.Float, offset % texture.Width);
						}
					}
					if(aligny) {
						float offset = ((start.Sidedef.Sector.CeilHeight - j.ceilingHeight) / scaley) * j.scaleY + ystartalign; //mxd
						offset -= j.sidedef.OffsetY; //mxd
						offset = (float)Math.Round(offset); //mxd

						if(matchtop)
							j.sidedef.Fields["offsety_top"] = new UniValue(UniversalType.Float, Tools.GetSidedefTopOffsetY(j.sidedef, offset, j.scaleY, true) % texture.Height); //mxd
						if(matchbottom)
							j.sidedef.Fields["offsety_bottom"] = new UniValue(UniversalType.Float, Tools.GetSidedefBottomOffsetY(j.sidedef, offset, j.scaleY, true) % texture.Height); //mxd
						if(matchmid) {
							//mxd. Side is part of a 3D floor?
							if(j.sidedef.Index != j.controlSide.Index) {
								offset -= j.controlSide.OffsetY;
								offset -= j.controlSide.Fields.GetValue("offsety_mid", 0.0f);
								j.sidedef.Fields["offsety_mid"] = new UniValue(UniversalType.Float, offset % texture.Height); //mxd
							} else {
								j.sidedef.Fields["offsety_mid"] = new UniValue(UniversalType.Float, Tools.GetSidedefMiddleOffsetY(j.sidedef, offset, j.scaleY, true) % texture.Height); //mxd
							}
						}
					}
					forwardoffset = j.offsetx;
					backwardoffset = j.offsetx - (int)Math.Round(j.sidedef.Line.Length / scalex * offsetscalex);

					// Done this sidedef
					j.sidedef.Marked = true;
					j.controlSide.Marked = true;

					// Add sidedefs forward (connected to the right vertex)
					v = j.sidedef.IsFront ? j.sidedef.Line.End : j.sidedef.Line.Start;
					AddSidedefsForAlignment(todo, v, true, forwardoffset, j.scaleY, texture.LongName, true);

					// Add sidedefs backward (connected to the left vertex)
					v = j.sidedef.IsFront ? j.sidedef.Line.Start : j.sidedef.Line.End;
					AddSidedefsForAlignment(todo, v, false, backwardoffset, j.scaleY, texture.LongName, true);
				}
			}
		}

		// This adds the matching, unmarked sidedefs from a vertex for texture alignment
		private void AddSidedefsForAlignment(Stack<SidedefAlignJob> stack, Vertex v, bool forward, float offsetx, float scaleY, long texturelongname, bool udmf) {
			foreach(Linedef ld in v.Linedefs) {
				Sidedef side1 = forward ? ld.Front : ld.Back;
				Sidedef side2 = forward ? ld.Back : ld.Front;

				if((ld.Start == v) && (side1 != null) && !side1.Marked) {
					List<Sidedef> controlSides = getControlSides(side1, udmf);//mxd

					foreach(Sidedef s in controlSides) {
						if(Tools.SidedefTextureMatch(s, texturelongname)) {
							SidedefAlignJob nj = new SidedefAlignJob();
							nj.forward = forward;
							nj.offsetx = offsetx;
							nj.scaleY = scaleY; //mxd
							nj.sidedef = side1;
							nj.controlSide = s; //mxd
							stack.Push(nj);
						}
					}
				} else if((ld.End == v) && (side2 != null) && !side2.Marked) {
					List<Sidedef> controlSides = getControlSides(side2, udmf);//mxd

					foreach(Sidedef s in controlSides) {
						if(Tools.SidedefTextureMatch(s, texturelongname)) {
							SidedefAlignJob nj = new SidedefAlignJob();
							nj.forward = forward;
							nj.offsetx = offsetx;
							nj.scaleY = scaleY; //mxd
							nj.sidedef = side2;
							nj.controlSide = s; //mxd
							stack.Push(nj);
						}
					}
				}
			}
		}

		//mxd
		private static bool sidePartIsSelected(List<BaseVisualGeometrySidedef> selection, Sidedef side, VisualGeometryType geoType) 
		{
			foreach(BaseVisualGeometrySidedef vs in selection) 
				if(vs.GeometryType == geoType && vs.Sidedef.Index == side.Index) return true;
			return false;
		}

		//mxd
		private List<Sidedef> getControlSides(Sidedef side, bool udmf) {
			if(side.Other == null) return new List<Sidedef>() { side };
			if(side.Other.Sector.Tag == 0) return new List<Sidedef>() { side };

			SectorData data = GetSectorData(side.Other.Sector);
			if(data.ExtraFloors.Count == 0)	return new List<Sidedef>() { side };

			List<Sidedef> sides = new List<Sidedef>();
			foreach(Effect3DFloor ef in data.ExtraFloors)
				sides.Add(ef.Linedef.Front);

			if(udmf)
				sides.Add(side); //UDMF map format
			else
				sides.Insert(0, side); //Doom/Hexen map format: if a sidedef has lower/upper parts, they take predecence in alignment

			return sides;
		}

		#endregion
	}
}