Fixed, Visual mode: things in sectors affected by line slope effect were not updated when sector height was indirectly changed.
Game configurations: added "internalsoundnames" property.
Updated documentation ("Game Configuration - Basic Settings" page).
Fixed, DECORATE support: the editor was unable to determine actor sprite when the actor itself had no sprites defined and the actor it inherited from was only defined in the game configuration.
Fixed, Drag geometry modes: linedefs without both sides were removed after dragging them when "Replace with Dragged Geometry" mode was active.
Updated ZDoom_DECORATE.cfg.
Fixed: voxel support logic was outdated, which in some cases resulted in voxels not being loaded and in some weird behaviour when trying to change pitch/roll of associated things.
Updated sprites lookup logic. Now it correctly handles sprites named like NNNNA0B0.
Fixed: in some cases DECORATE parser was unable to correctly detect sprite name & frame(s) block.
Updated ZDoom_ACS.cfg.
Updated ZDoom_DECORATE.cfg.
Changed, "Align Things to Nearest Linedef" action: the action can now also align things with FLATSPRITE and WALLSPRITE flags (previously only things with attached models were aligned).
Changed, "Align Things to Nearest Linedef" action: the action can now align things to the middle part of double-sided linedef, if it has a middle texture assigned.
Fixed: CVARINFO parser was unable to parse negative int/float values.
Fixed: in some cases TextLabel text size was checked before it was calculated.
Internal, Visual mode: reduced the number of unnecessary geometry updates when changing map geometry.
Updated ZDoom_DECORATE.cfg (atan2 and VectorAngle).
Added, Draw Line and Draw Curve modes: added "Auto-finish drawing" setting. When enabled, the modes will automatically finish drawing when currently drawn lines and already existing level geometry form a closed shape.
Changed: sector-wise linedef flipping is now done using the new "Align Linedefs" action. "Flip Linedefs" action works the same as in DB2 again.
Changed: when a map was already loaded, using "Open Map" action will use that map's directory as the starting directory.
Changed: official IWADs can no longer be saved.
Changed: disabled lump ranges/duplicate entries checks for official IWADs.
Changed: wad type is now preserved when saving a map (previously all wads were saved as PWADs).
Changed: moved Updater.exe launch much closer to the editor termination point to avoid any chance of it closing the editor before it properly closes itself.
Updated ZDoom_DECORATE.cfg (A_Blast).
Updated documentation.
Fixed, Visual mode: UDMF sidedef brightness should be ignored when a wall section is affected by Transfer Brightness effect.
Fixed, Visual mode: any custom fog should be rendered regardless of sector brightness.
Fixed, Visual mode: "fogdensity" and "outsidefogdensity" MAPINFO values were processed incorrectly.
Fixed, Visual mode: in some cases Things were rendered twice during a render pass.
Fixed, Visual mode: floor glow effect should affect thing brightness only when applied to floor of the sector thing is in.
Fixed, TEXTURES parser: TEXTURES group was named incorrectly in the Textures Browser window when parsed from a WAD file.
Fixed, MAPINFO, GLDEFS, DECORATE parsers: "//$GZDB_SKIP" special comment was processed incorrectly.
Fixed, MAPINFO parser: "fogdensity" and "outsidefogdensity" properties are now initialized using GZDoom default value (255) instead of 0.
Fixed, Map Analysis mode: fixed a crash when trying to dissolve an invalid sector when one of it's linedefs referenced it on the both sides.
Fixed, Sectors mode: fixed incorrect undo description when deleting sectors.
Internal: joined declaration and assignment of some more variables.
Fixed, Script Editor, cosmetic: we should not show error line number when we don't have one.
ZDoom acc.exe: several error types now output more detailed info.
Fixed, Visual mode: UDMF thing alpha property was applied only when UDMF renderstyle property was also set (should also be applied when renderstyle property is set in the DECORATE actor definition).
Game configurations, ZDoom family: Pistol and Gold Wand actors now use internal sprites.
Updated ZDoom ACC and ZDoom_ACS.cfg (PickActor flags).
Changed, ACC compiler: when building includes list, the compiler no longer tries to find/copy include files defined in current script configuration (previously it was hardcoded to skip "zcommon.acs" and "common.acs" only).
Fixed, Visual mode: things with Additive RenderStyle were rendered as additive only when their alpha was less than 1.0.
Fixed, Classic modes: 3d floor linedef indicators shown in Classic modes were not updated after finishing sector drawing.
Updated ZDoom ACC to git rev. f92fbb9.
Updated ZDoom_ACS.cfg.
Added "makedoorceil" game configuration property. Works the same way as "makedoortrack" and "makedoordoor", but for ceilings of door sectors.
Changed, Game configurations: the editor no longer tries to load DECORATE/MODELDEF/VOXELDEF/GLDEFS/REVERBS lumps when "decorategames" setting is not specified / is set to empty string.
Changed, General interface: "Tools -> Reload MODELDEF/VOXELDEF" and "Tools -> Reload GLDEFS" menu items are no longer shown when current game configuration doesn't support DECORATE.
Fixed a crash when pasting linedef/thing properties in Hexen map format.
Fixed, Visual mode: Visual Thing resources were not fully unloaded when resetting D3D device leading to crash when switching to the editor from a DX-using game engine (like ZDoom) running in fullscreen.
Fixed: in some cases, when current game configuration supported multiple script compilers, it was possible to open/create a map or change map options without selecting any script compiler.
Fixed, New Map Options window: default map name was not updated when switching game configurations.
Fixed: copied map element properties were not reset after switching to another map.
Fixed: stored textures for "Make Door" action were not reset after switching to another map.
Fixed, Game Configurations window: currently selected test engine name was not updated when pasting test engines from another configuration.
Fixed, Game Configurations: all "Heretic in Doom map format" configurations were using Doom sector effects list.
Fixed, Game Configurations: all "Strife in Doom map format" configurations were using Doom sector effects list.
DECORATE: added "$obsolete" special comment. When present, it marks the thing as obsolete. It will be detected by "Check obsolete thing" Map Analysis Mode check and will be marked in the Thing Properties Window and the Thing Info panel.
Map Analysis mode: added "Check obsolete things" check.
Updated documentation ("DECORATE keys" page).
Updated ZDoom_DECORATE.cfg.
Changed: Visplane Explorer plugin is now initialized only in Doom/Hexen map formats.
Fixed, Visual mode: thing cages were not rendered when things didn't have a sprite.
Fixed, Internal, DB2 bug: Plug.Dispose() was never called.
Added "Paste Properties Special" actions in "Classic" and "Visual" categories. They work the same way as "Paste Special" action.
Added: "Copy Properties", "Paste Properties" and "Paste Properties Special" options are now shown in the Edit menu if current classic mode supports them.
Changed, Paste Properties Special window: only options relevant to current map format are now displayed.
Changed, Paste Properties Special window, UDMF: all UI-managed options are now available.
Fixed: MAPINFO parser was unable to process "include" directives.
Fixed, General interface: selection info was reset to "Nothing selected" after few seconds regardless of current selection.
Fixed, Visual mode: thing bounding boxes were not updated when changing things positions using Randomize mode.
Fixed, Visual mode: event lines were displayed at incorrect height when entering Visual mode for the first time.
Fixed, Texture Browser window: when MixTexturesFlats Game Configuration option is disabled, textures/flats are no longer shown in the Used group when flats/textures with the same names are used in the map.
Fixed(?): probably fixed an exception some users reported when trying to initialize a Classic mode after switching from Visual mode with "Sync cameras" option enabled.
Changed, Game configurations, Thing Categories: a block must have at least one thing category property to be recognized as a thing category.
Changed, Visplane Explorer: the plugin now outputs more info when it fails to initialize vpo.dll.
Cosmetic, Thing Edit window, Doom/Hexen map format: adjusted UI layout so thing flags control no longer displays scrollbars in Hexen map format.
Internal: merged methods from UDMFTools into UniFields, removed UDMFTools.
Updated Inno Setup script (added VC++ 2008 SP1 distributive).
Updated ZDoom_DECORATE.cfg (A_CheckBlock).
Updated documentation (added "System Requirements" page).
Visual mode: fog distance calculation is now much closer to GZDoom one.
Visual mode: thing brightness calculation when a thing is affected by floor glow is now much closer to GZDoom one.
Linedef edit window, UDMF: added "Reset front/back brightness" buttons.
Sector edit window, UDMF: added "Reset ceiling/floor brightness" buttons.
Internal, Visual mode, Things mode: persistent event lines are now updated only when map objects are changed instead of doing it on every display redraw.
Internal: improved Dictionary lookup times when using map objects and textures as keys.
Internal: added "Release + Profiler" solution configuration.
Updated ZDoom_ACS.cfg (Warp).
Added, Visual mode, DECORATE: "RenderStyle" property is now partially supported.
Added, Visual mode, DECORATE: +BRIGHT flag is now supported.
Added, Visual mode, UDMF: "Alpha" thing property is now supported.
Added, Visual mode, UDMF: "RenderStyle" thing property is now partially supported.
Added, Visual mode, Hexen map format and UDMF: "Translucent" and "Invisible" thing flags are now supported.
Added, Game Configurations: added "alpha" and "renderstyle" Thing and Thing Category properties.
Fixed, Visual mode: blockmap was not updated when moving things using "Move Thing Left/Right/Forward/Backward" and "Move Thing to Cursor Location" actions.
DECORATE parser: added a warning when unable to find actor's parent class.
Internal: current map format can now be checked using "General.Map.UDMF", "General.Map.HEXEN" and "General.Map.DOOM" properties.
Updated documentation ("Game Configuration - Things Settings" page).
Removed, Texture Browser: removed "Show image sizes" checkbox. "Show texture and flat sizes in browsers" preferences setting is now used instead.
Fixed, Things mode: event line between pre-last and the last PatrolPoint was not drawn.
Fixed, Things mode: highlight range for sizeless things (things with "fixedsize" game configuration property) was calculated incorrectly.
Fixed: fixed a crash when opening Script Editor after using "Open map in current wad" command to switch to UDMF map with SCRIPTS lump when current script configuration was not saved in the wad's .dbs file.
Fixed: map closing events were not triggered when using "Open map in current wad" command, which could potentially result in plugin crashes/incorrect behavior.
Fixed: Sector Drawing overrides panel could trigger an exception when closing the map during resource loading.
Internal: added "Debug + Profiler" solution configuration, added 2 profiling methods to DebugConsole.
Internal: rewrote MainForm.DisplayStatus() / StatusInfo to handle selection info in a more structured way.
Fixed, internal: some destructors could potentially be executed more than once potentially leading to exceptions. Other destructors were not called at all.
Updated ZDoom_DECORATE.cfg.
Changed, Visual mode: changed thing fog calculation logic. Should be closer to GZDoom now.
Fixed, GLDEFS parser: "height" texture parameter was not treated as optional.
Fixed, text lump parsers: in some cases incorrect line number was displayed in error and warning messages.
Fixed, Visual mode: glow effect was not applied to sectors with 3 sidedefs.
Fixed, Visual mode: in some cases glow effect was not updated when replacing textures.
Fixed, general interface: "Full Brightness" button state was not updated during map loading.
Fixed, Drag Linedefs/Vertices/Sectors/Things modes: positions of line length labels were not updated while panning the view.
Cosmetic: added a bunch of new icons.
Cosmetic: changed Visual mode crosshair.
Changed, Drag Linedefs/Vertices/Sectors/Things modes: line length labels are now displayed the same way as in Draw modes.
Changed, Drag Linedefs/Vertices/Sectors/Things modes: "lock movement to cardinal directions" mode (Alt-Shift-Drag) now locks movement in 4 directions instead of 8 and doesn't snap map elements to nearest grid intersections when they are not aligned to it.
Added, Visual mode, GZDoom, DECORATE: FORCEXYBILLBOARD flag is now supported.
Added, Visual mode, GLOOME, DECORATE: FLOORSPRITE, CEILSPRITE, WALLSPRITE, ROLLSPRITE and STICKTOPLANE flags are now supported (implementation is somewhat broken ATM and probably doesn't work the same way as in GLOOME, because Windows build with most these features is nowhere to be found...).
Fixed, Visual mode: in some cases Thing brightness was calculated incorrectly.
Updated ZDoom_DECORATE.cfg.
Game Configurations: updated things in ZDoom "Bridges" category to use argument types 23 and 24.
Documentation: added "Action Argument Settings" page, updated "Basic Settings", "Map Format Settings", "Linedefs Settings" and "Things Settings" pages in Configurations -> Game Configurations group.
Documentation: updated "DECORATE keys" page.
Visual mode: added support for "Transfer Floor Brightness" (210) effect.
Visual mode: added support for "Transfer Ceiling Brightness" (211) effect.
Visual mode: changed the way thing brightness is calculated. Should be closer to GZDoom now.
Sector Edit Form: you can now enter "++" or "--" into "Height Offset" input to raise or lower sectors by their height.
Cosmetic fix in ZDoom_linedefs.cfg.
Added, Visual mode, UDMF: added "Increase Scale" and "Decrease Scale" actions.
Added, Visual mode, UDMF: "Reset Texture Offsets" action now resets scale when used on things.
Added, Visual mode, UDMF: "Reset Local Texture Offsets" action now resets scale, pitch and roll when used on things.
Changed, Visual mode, UDMF: "Reset Texture Offsets" action now only resets texture offsets (previously it also reset texture scale).
Changed, Visual mode, UDMF: "Reset Local Texture Offsets" action now resets texture offsets, scale and brightness of sidedefs and also rotation of floors/ceilings.
Changed, Visual mode, UDMF: thing box arrow now displays pitch and roll for things, which have attached model and appropriate MODELDEF flags.
Changed, Thing Edit Form, UDMF: negative pitch and roll can now be entered.
Updated documentation.
Info panels: float values are now formatted regardless of current CultureInfo (e.g. decimal separator is now always dot). Also, they are no longer clamped to 2 decimal places.
Updated ZDoom_ACS.cfg.
Visual mode: removed "Fit Texture's Width" and "Fit Texture's Height" actions.
Visual mode: "Auto-align texture offsets" actions were incorrectly aligning double-sided middle walls in some cases.
Visual mode: "Auto-align texture offsets" actions now align non-wrapped double-sided middle walls to vertical offset closest to their initial vertical offset.
Visual mode: middle parts of double-sided walls were ignored when Shift-selecting walls.
Nodebuilders/Game configurations: GL nodes definitions were missing from game configurations.
Nodebuilders/Game configurations: "~MAP" wildcard can now be a part of a lump name.
Nodebuilders: GL nodes were not properly handled by the editor.
Main Window: the window is now moved into the view when stored position is ouside of screen bounds.
Classic and Visual modes: changing thing pitch was ignored in some cases.
Visual mode: raising and lowering a thing with "+SPAWNCEILING" flag now works the same way as when raising/lowering a regular thing.
Visual mode: using "Raise/Lower Floor/Ceiling to adjacent sector" actions on a thing with "+SPAWNCEILING" flag now works the same way as when using them on a regular thing.
Rendering: even more fixes to MODELDEF and UDMF properties-related model rendering logic.
Internal, ResourceListEditor: rewritten resource validation check in a more OOP-ish way.
Configurations: fixed an infinite loop crash when a file was trying to include() itself.
UDMF thing flags: added Skill 6-8 to the flags list (because there are thing filters for these).
ZDoom_ACS.cfg: added definitions for SetTeleFog and SwapTeleFog.
ZDoom_DECORATE.cfg: added definitions for A_SetTeleFog and A_SwapTeleFog.
Updated ZDoom ACC.
Updated documentation.
Import Wavefront .obj as Terrain mode: floor height of each created sector is now set to the average height of an .obj polygon it was created from.
Import Wavefront .obj as Terrain Settings window: added "Use slopes" checkbox. When enabled, the mode will create slopes using vertex height offsets (UDMF) or Floor Vertex Height things (1504).
Fixed, Visual Mode: things were rendered at wrong height after using "Lower/Raise Height" actions in sectors with sloped floor (or ceiling for ceiling-aligned things)
Fixed: info panel was not updated after switching to another Edit Mode.
Fixed, Texture Browser Form: well, I broke "Tab" key functionality again (in previous commit)...
Maintenance: changed curly braces style to match DB2 one (hopefully not breaking anything in the process...).
Maintenance: changed private method names casing to match DB2 one.
Thing Edit Form, UDMF: added controls for setting pitch, roll, scale, render style, fill color, alpha, health and score.
Visual mode, UDMF: UDMF scale is now applied when rendering sprites.
Added Thing Statistics form (Edit -> View Thing Types...), which shows all loaded thing types with some additional info.
Visual mode: sprites with negative ScaleX and positive ScaleY were not rendered properly.
Classic modes: display was not updated after loading a sprite.
Current testing engine change was not saved on closing the program when no other game configuration settings were changed.
Visual mode: added "Match Brightness" action.
DECORATE parser: actor names, which contain "+" and "-" symbols, are now parsed correctly.
Fixed an error in lump ranges creation logic.
Cosmetic fixes in various warning/error messages.
Updated documentation.
Visual mode: added "Reset Local Texture Offsets (UDMF)" action (default key is Ctrl-Shift-R). It will reset upper/middle/lower texture offsets in UDMF and will act exactly as "Reset Texture Offsets" action in other map formats.
Textures were not loaded properly from PK3/PK7 archives.
Visual mode: restored ability to remove textures using Delete action.
Visual mode: fixed several bugs in Cut/Copy/Paste things actions.
Visual mode: vavoom style 3d floors were not displayed properly.
Visual mode, 3d floors: added support for "RestrictLighting" (2) flag.
Visual mode, 3d floors: inner sides of 3d floors with "swimmable"/"render inside" flags used incorrect brightness value.
Textures now load up to 2x faster when "mix textures and flats" flag is set in game configuration.
TEXTUREx/TEXTURES: texture will now be created if at least one of it's patches is loaded.
Visual mode: fixed a crash when "Slope floor to here" (9500) or "Slope ceiling to here" (9501) things were not inside sector.
Fixed: flats were not loaded form wads inside Directory and PK3/PK7 resources.
Sector Info Panel, Linedef Info Panel: texture size was shown for unknown textures.
Texture scale controls now have "Link" button.
Thing, Sector (UDMF) and Linedef edit forms now work in realtime mode.
Some more fixes in Edit form realtime update stuff.
Removed some unused variables and functions.
Visual mode, UDMF: renamed "Rotate Thing Clockwise" and "Rotate Thing Counterclockwise" actions to "Rotate Clockwise" and "Rotate Counterclockwise". These actions can now be used to change rotation of floor/ceiling textures.
Visual mode, UDMF: "Reset Texture Offsets" action now also resets sidedef's scale and floor/ceiling's scale and rotation.
Visual mode, UDMF: control line's OffsetX and OffsetY were not taken into account when calculating texture offsets of 3d floors' sides.
Visual mode, UDMF: fixed a ton of bugs in Auto align functions.
Visual mode, UDMF: when using "Move Texture Left/Right/Up/Down by 1" actions texture offsets were not updated properly when texture's scale was < 1.0.
Visual mode, UDMF: OffsetX and OffsetY were not taken into account in "Fit Texture Width/Height" actions.
Dockers Panel: added Pin/Unpin button, which acts the same as "Preferences -> Interface -> Side panels -> Auto hide" checkbox.
Texture size labels can now be disabled by unchecking "Preferences -> Interface -> Show texture and flat sizes in browsers" checkbox.
Texture size labels now are not shown for unknown textures.
Most of texture size labels had incorrect bg color.
ZDoom_linedefs.cfg: action specials 223 and 224 had incorrect Arg0.
Visual Mode, UDMF, Visual Vertices: you can now press "Delete" key to clear z-offsets of selected vertices.
Visual Mode, UDMF, Visual Vertices: the logic, which decides whether z-offset should be kept or removed, was not working properly.
Visual Mode, UDMF: Auto-align Textures (Y) action was not working properly when targeted texture was lower wall without "Lower Unpegged" flag.
Visual Mode, UDMF: "Auto Align Textures" actions now work on slopes.
Visual Mode, UDMF: Floor/ceiling texture rotation is now taken into account when moving texture offsets with arrow keys.
Visual Mode, UDMF: Fixed a bug in floor/ceiling texture dragging by mouse.
