Game configurations, Line Identification action: added "Front side only" (128) flag to arg1.
Game configurations, Line Identification action: renamed arg1 flags to match corresponding UDMF flag names.
Updated udmf_zdoom.txt.
Fixed: PairedFloatControl had incorrect initial link icon.
Internal, AngleControl: rewritten AngleChanged event so it behaves like the rest of custom events.
Updated GZDB icon.
Fixed, Fit Textures action: vertical texture offset of a middle part of double-sided linedef with "Lower unpegged" flag was calculated incorrectly.
Fixed, Fit Textures action: texture offsets were calculated incorrectly when using the action on several groups of connected walls at once with "Fit across connected surfaces" enabled.
Fixed, Visual mode: middle parts of double-sided linedefs were not rendered when ScaleY was negative.
Updated ZDoom_DECORATE.cfg.
Visual mode: removed "Fit Texture's Width" and "Fit Texture's Height" actions.
Visual mode: "Auto-align texture offsets" actions were incorrectly aligning double-sided middle walls in some cases.
Visual mode: "Auto-align texture offsets" actions now align non-wrapped double-sided middle walls to vertical offset closest to their initial vertical offset.
Visual mode: middle parts of double-sided walls were ignored when Shift-selecting walls.
Nodebuilders/Game configurations: GL nodes definitions were missing from game configurations.
Nodebuilders/Game configurations: "~MAP" wildcard can now be a part of a lump name.
Nodebuilders: GL nodes were not properly handled by the editor.
Main Window: the window is now moved into the view when stored position is ouside of screen bounds.
Classic and Visual modes: changing thing pitch was ignored in some cases.
Visual mode: raising and lowering a thing with "+SPAWNCEILING" flag now works the same way as when raising/lowering a regular thing.
Visual mode: using "Raise/Lower Floor/Ceiling to adjacent sector" actions on a thing with "+SPAWNCEILING" flag now works the same way as when using them on a regular thing.
Rendering: even more fixes to MODELDEF and UDMF properties-related model rendering logic.
Internal, ResourceListEditor: rewritten resource validation check in a more OOP-ish way.
Configurations: fixed an infinite loop crash when a file was trying to include() itself.
UDMF thing flags: added Skill 6-8 to the flags list (because there are thing filters for these).
ZDoom_ACS.cfg: added definitions for SetTeleFog and SwapTeleFog.
ZDoom_DECORATE.cfg: added definitions for A_SetTeleFog and A_SwapTeleFog.
Updated ZDoom ACC.
Updated documentation.
Resource List Editor: not existing resources are now shown using different color.
Map Options, Open Map Options, Game Configurations windows: a warning is now shown when a map resource doesn't exist.
Some minor fixes to Resource List Editor's context menu.
Updated ZDoom_DECORATE.cfg.
Import Wavefront .obj as Terrain mode: floor height of each created sector is now set to the average height of an .obj polygon it was created from.
Import Wavefront .obj as Terrain Settings window: added "Use slopes" checkbox. When enabled, the mode will create slopes using vertex height offsets (UDMF) or Floor Vertex Height things (1504).
Fixed, Visual Mode: things were rendered at wrong height after using "Lower/Raise Height" actions in sectors with sloped floor (or ceiling for ceiling-aligned things)
Fixed: info panel was not updated after switching to another Edit Mode.
Bit Flags form now changes width to show flags with long names without scrolling.
Bit Flags form: flag numbers are now shown as well as names.
Game configurations: updated Hexen and ZDoom linedef definitions. Now they (hopefully) fully match ZDoom ones.
Action Selector Control: fixed a crash when trying to increase action above maximum value using mouse wheel.
Sector/Linedef/Thing tag lists are now handled by corresponding TypeHandlers (and not by dirty hacks as before).
Linedef info panel: line peggedness labels were obscured by effect label in Doom/Hexen map formats.
Cosmetic changes in Sector Info Panel and Thing Browser Control.
ArgumentInfo: fixed a crash when enum specified in a game configuration doesn't exist.
Updated Hexen and ZDoom linedef configs.
Updated ZDoom_DECORATE.cfg
Fixed, Texture Browser Form: well, I broke "Tab" key functionality again (in previous commit)...
Maintenance: changed curly braces style to match DB2 one (hopefully not breaking anything in the process...).
Maintenance: changed private method names casing to match DB2 one.
Texture browser form: added "Long texture names" check-box. It can be used to toggle between displaying long and short texture names.
Texture browser form: added "Show image size" check-box.
Texture browser form: image size is now shown differently.
Image Selector: added a button to toggle between long and short texture name.
Linedef info panel: long texture names are now displayed properly.
Sector info panel: long texture names are now displayed properly.
Fixed: "Save Screenshot" and "Save Edit Area Screenshot" actions were triggered multiple times when a child window was open.
Fixed: used textures should be always updated after using "Change map in current WAD" action.
Fixed, "Change map in current WAD": fixed a crash when trying to switch from a map with missing game configuration path.
Updated ZDoom_ACS.cfg.
Open Map in Current WAD: resources are now reloaded when current and target map's resources don't match.
Added some boilerplate to UniversalParser and PK3FileImage.
Internal: ImageSelectorControl now has "UsePreviews" property.
Internal: added ConfigurablePictureBox.
Updated ZDoom_DECORATE.cfg.
Thing Edit form: when selection contains more than one thing, thing types form selected category are now randomly applied to it.
Fixed, Thing Edit form: selection change was not processed in some cases.
"Find Any Texture or Flat", "Find Sector Flat" and "Find Sidedef Texture" options now support "*" (match any number of characters) and "?" (match any single character) wildcards.
"Find Any Texture or Flat" is now available any game configuration (previously it was disabled when "MixTexturesFlats" game configuration option was disabled, now only "Replace" functionality is disabled).
"Find Thing Flags" and "Find Linedef Flags" can now replace flags.
Added "Find Sidedef Flags" and "Find Sector Flags" search options.
Fixed, Draw Grid mode: grid triangles are now aligned properly with previously drawn triangulated grids when using the same map grid size and "Lock slices to grid" and "Triangulate" options are enabled.
Fixed, Draw Grid mode: not all grid cells were drawn in some cases.
Fixed, Draw Grid mode: current grid size was not increased when "Lock slices to grid" was enabled and the start point was no longer on the map grid.
Changed, Draw Grid mode: snap to grid is now always enabled and snap to nearest is now always disabled when "Lock slices to grid" is enabled.
Changed, Draw Grid mode: when grid's width or height is 0 when accepting the mode, a segmented line is now drawn instead of just a line.
Fixed incorrect screenshot size when a window was maximized.
Fixed: more than one screenshot per second can now be saved.
Changed screenshot filename date format to yyyy.mm.dd.
Consistency, Randomize Sectors form: persistent settings are now saved only when applying changes done in the form (e.g. in the same conditions as in Randomize Things / Vertices forms).
Fixed: Randomize Sectors, UDMF: vertex height changes were not undone properly after using the mode (I broke it in r2101).
Fixed: Randomize Sectors: floor/ceiling textures can not be used as lower/upper textures when "MixTexturesAndFlats" is disabled. In this case the corresponding option is now changed to "Use default texture".
Changed, Thing Edit form: multi-select mode is now disabled when only one thing is edited.
Internal: different implementation of MultiSelectTreeview (http://sourceforge.net/projects/mstreeview/) is now used.
Fixed, WavefrontExporter: floor and ceiling textures were not exported when using "classic" game configurations (ones with disabled "MixTexturesAndFlats" option). This should also fix incorrect flats on exported model when there are flats and textures with the same name.
Fixed, WavefrontExporter: 3d floors geometry and wall geometry around them was created incorrectly.
Fixed, WavefrontExporter: floor and ceiling textures of non-Vavoom 3d floors were swapped on exported geometry.
Fixed, DECORATE parser: error status was not cleared when switching to different resource.
Fixed, DECORATE parser: fixed a parse error when DB2-specific actor properties (like "//$category") were located outside of actor's scope.
Added icons for "Save Screenshot" menu items.
Development: "Save Screenshot (active window)" action will work on a child Form only if it is inherited from DelayedForm.
Renamed "Toggle dynamic lights rendering" action to "Show dynamic lights".
Changed: "Show dynamic lights" action now toggles between available dynamic light rendering modes.
Renamed "Toggle models rendering" action to "Show models".
Changed: "Show models" action now toggles between available model rendering modes.
Removed "Toggle dynamic lights animation" and "Render selected/all models" actions.
Fixed, Randomize Sectors form: selection highlight was not updated after applying the changes when the form was shown in Sectors mode.
Consistency: selection is now cleared after applying changes done in Randomize Things and Randomize Vertices forms.
Fixed, Classic modes: sprites of things with attached models were not rendered when model rendering was disabled.
Updated documentation.
Visual mode: "Lower/Raise Floor/Ceiling" actions now work on surfaces with sector slopes.
Cosmetic: numeric textboxes, which support relative values, now have differently colored text and a tooltip.
Internal: renamed Sector.CeilingSlopeOffset to Sector.CeilSlopeOffset, Sector.CeilingSlope to Sector.CeilSlope to match their names with similar sector properties.
Textures Browser form: PK3/Directory TEXTURES images are now shown in a separate folder in the resources tree.
Fixed, Textures Browser form: fixed a logic error when trying to select initial flat when mix textures & flats was disabled in the current game configuration (this resulted in the blank textures list after opening the form).
Fixed, Textures Browser form: resources tree showed textures count even when browsing flats.
Fixed, Textures Browser form: PK3/Directory textures took precedence even when browsing flats (this means when there were a flat and a texture with the same name, a texture was displayed when browsing flats).
Fixed, Classic modes: actor's scale set in DECORATE was ignored when rendering models.
Fixed, MODELDEF parser: in some cases, several model definitions were skipped when trying to skip the current one.
Fixed, resource management: flat and sprite TEXTURES definitions were loaded only from TEXTURES files named "TEXTURES".
Fixed/added, PK3/folder resource management: patch locations for sprites defined in TEXTURES are now checked the same way as in ZDoom (previously only the "sprites" folder was checked).
Fixed/added, PK3/folder resource management: patch locations for textures defined in TEXTURES are now checked the same way as in ZDoom (previously only the "textures" folder was checked).
Fixed, PK3/folder resource management: flats defined in TEXTURES were not added to the global Flats image list.
Fixed, PK3/folder resource management: in some cases, the image search algorithm could find flats, textures, patches or sprites in incorrect folders (for example, it could find a flat in "flats_backup" folder).
Map Analysis, internal: some ErrorCheckers and ErrorResult had inconsistent namespaces.
Thing Edit forms, internal: optimized missing flags check a bit.
Game Configurations: moved "thingflagscompare" from Game to Map format blocks. "Check stuck things" check now works properly in Doom/Boom game configurations.
Map Analysis: fixed a possible crash during "Check texture alignment" check.
Map Analysis: ResultStuckThingInLine now highlights both thing and line.
Map Analysis: ResultStuckThingInThing now highlights both things and allows to delete any of them.
Internal, Map Analysis: rewritten parts of "Check stuck things" class.
Internal, Map Analysis: changed the way processed stuff is stored in "Check texture alignment" class.
Internal: changed CurrentDomainOnUnhandledException, so ExceptionDialog with proper info shows up even if adding exception to the Event Log failed.
Internal: changed format, in which thingflagscompare info is stored.
Map Analysis form: error checks are now alphabetically sorted.
Map Analysis form: added "Toggle All" check box.
Internal: CheckboxArrayControl now has Sort() method.
More fixes in ZDoom_DECORATE.cfg
Fixed: Visual mode: "Select" action with "with the same textures" / "with the same height" modifiers (Shift/Ctrl + LMB) was not working properly when used on vavoom-type 3d floor sidedefs.
Fixed: Visual mode, UDMF, "Auto-align textures" actions: vertical texture offset was calculated incorrectly for vavoom-type 3d floors.
Visual mode: "Select" action with "with the same textures" modifier (Shift + LMB) now selects adjacent sidedefs only when their height intersects with the height of the current sidedef.
Visual mode: "Select" action with "with the same textures" modifier (Shift + LMB) was not selecting connected one-sided sidedefs when used on a sidedef without a texture.
Cosmetic: fixed a couple of action descriptions in BuilderModes' Actions.cfg.
Cosmetic: MainForm.UpdateToolStripSeparators was working incorrectly in some cases.
Cosmetic: ErrorChecksForm's title was not updated when no errors were found.
The editor will fail more gracefully when no D3D device is detected.
In some cases the editor was constantly checking D3D device availability when minimized.
Added more DX-related debug output (only in Debug builds).
Fixed: certain UDMF-only properties were not cleared when pasting map elements from UDMF to non-UDMF maps.
Fixed a bug introduced in r2043: helper objects were not updated in some cases.
Linedef Edit Form, UDMF: missing activation flags warning is now displayed only for linedef actions with "requiresactivation" property set in a game configuration.
Game configurations: fixed a couple of property names, added more enums & default values.
Updated BCC compiler to rev. 20140818r2.
Sector Edit Form (UDMF): sector brightness value was processed incorrectly when relative value was entered.
Internal: added "ButtonStepsWrapAround" property to ButtonsNumericTextbox.
Internal, SectorEditFormUDMF: more changes to Slopes tab. Still not operational...
Map Analysis mode: export to file command will now show "Save File" dialog instead of putting the file in the same folder as the map, also added some boilerplate.
Tag Explorer plugin: save to file command will now show "Save File" dialog instead of putting the file in the same folder as the map, also added some boilerplate.
Internal: reformatted GZCrash.log a bit.
Program Configuration: selected test engine index was not saved when applying the form.
Program Configuration: selected test engine index was not pasted when pasting a game configuration or test engines.
Program Configuration: in some cases current test engine name was not saved when applying the form.
Program Configuration: fixed broken logic when trying to add a test engine with the same file name as already existing one.
Texture Browser Form: don't save current texture group when the form was canceled.
Keyboard Shortcut Reference export: generated html will now be saved to program configuration folder if working folder is write-protected.
Internal: added SupportedMapFormats property to EditModeAttribute. A mode with this property specified will be available only in specified map formats.
Interface: Ceiling Align Mode and Floor Align Mode are now enabled by default.
Interface: Ceiling Align Mode and Floor Align Mode are now only available in UDMF map format.
Interface: Visplane Explorer Mode is now available only in Doom map format.
Also, I would like to use this opportunity to thank Siberian Tiger from DTD Team for helping me with SVN builds for more than two years. You made my constant wrestling with the code a much less tedious process.
Game Configurations: changed default map name for Doom maps to "E1M1".
New Map Form: "E1M1" is now used as a default name for Doom maps.
Thing Browser Control: double-click event is now sent only if user clicked in the node's label area.
Interface: added info messages for several toolbar toggles.
Interface: made Brightness icon more readable when using dark windows themes.
Internal: UDMF sector slopes and offsets are no longer stored in sector.Fields. Use sector.FloorSlope, sector.FloorSlopeOffset, sector.CeilingSlope and sector.CeilingSlopeOffset.
Tag Range plugin: tags can be set in relative mode (when this mode is enabled, generated values are added to existing tags instead of replacing them).
Updated documentation.
