Sectorlist traversal
MOM GET THE CAMERA
There's a LOT of code in the source that ended up mixing m_snext (the node for the next thing in the sector's thinglist) and m_tnext (the node for the next sector in the thing's sectorlist), so I renamed the following:
* m_snext ==> m_thinglist_next
* m_sprev ==> m_thinglist_prev
* m_tnext ==> m_sectorlist_next
* m_tprev ==> m_sectorlist_prev
Then, I changed all the instances where the code was trying to go m_thinglist_next on a mobj's touching_sectorlist (which would've just gone to the node for the next thing in the same sector, instead of the node for the next sector for the same thing). Notable samples:
* FF_SHATTER blocks now disappear the moment you go into their sector. You still can't give FF_SOLID to them because in that case they will still stop you if you never enter their sector at all (ie - clip on corners), but having them nonsolid no longer allows you to phase through entirely without busting them (which was the whole downside of making them intangible in the first place).
* You can now bump into multiple Mario blocks at a time, even if you're not exclusively in their sector.
* No more getting randomly stopped on the edges of bouncy FOFs.
* Landing on polyobjects might behave a little more consistently at the edge of their host sector.
* Teetering did a SHITTON of code that basically never got executed, and then had directly-blockmap-accessing code as a backup. The code was activatable by replacing the m_thinglist_next with m_sectorlist_next, but it behaved SUPER differently from what we're used to with teetering (if the player mobj's edge was JUST off the edge of a platform, you ended up in teetering frames - even if it looked like you could stand) so I ended up removing that section entirely.
Any objections?
See merge request !85
Fixes and changes related to the act of setting up a level (in other words, setup fixes)
Changes made in this branch so far:
* a REJECT lump of zero length (NOT to be confused with a REJECT lump of non-zero length with all-zeros, just to clarify) should no longer cause problems with netgames and otherwise. The game now checks if the lump exists, has the right name, and length is not zero - if it fails any of these, the REJECT lump is not loaded and P_CheckSight won't be allowed to use it. This means ZDBSP (no reject) should be safe(r) to use now!
* there's now a simple devmode-only message (requires "Setup" mode) if a sector is found to have no lines at all during setup. It's a far cry from the plot to I_Error the game I once had for that unsusal scenario, but such a level still works anyway so whatever.
See merge request !87
FF_REVERSEPLATFORM clipping
Ran into an issue whilst testing out one last feature (there's always one more...) for flat_alignment_revamp. This is a backported fix.
The bug was such that if you're falling through a platform with FF_REVERSEPLATFORM and not FF_PLATFORM, you'll be pushed downwards such that your head is against the bottom of the FOF. This just checks momz is greater than zero if it has FF_REVERSEPLATFORM to make sure it's okay to set ceilingz. (OR the alternative in reverse gravity.)
No test map because this was originally done for internal. Instead, test it on the other branch's test map.
See merge request !83
Software crashes fix
This branch SHOULD fix the many crashes people have reported lately that all point to the software renderer. Simply put, the software renderer allowed stuff to be drawn out of the screen even though that wasn't safe, and even the existing checks to prevent that didn't work.
If you saw me worrying about the sky HOMs I discovered in AGZ earlier in the commits for this branch, don't worry - it turns out that issue already existed in 2.1.15's srb2win.exe (and probably srb2dd.exe too) anyway, the changes in this branch didn't cause them. Hopefully nothing else broke then.
See merge request !75
Also, the teetering angle on slopes is now FRACUNIT/2 because there's literally no way to stand still on a slope that steep unless it doesn't have physics.
This means the current skewing-by-default effect isn't changed, and OpenGL's equivalent code doesn't have to be touched since apparently it was already like that.
This should mean that maps built with ZBSDP (no reject) should have less or no problems in netgames compared to the standard ZenNode maps now, hopefully. =)
note: once this is merged into internal, you should probably remove me from "programming assistance" so i'm not duplicated for no clear reason. unless you want me to slowly take over every section in the credits >:3c
"frontsector" in this part of the code isn't actually the polyobject's sector for back-side polyobject segs, it's the in-level sector the polyobject as a whole is being rendered in it turns out.
Red apparently left in code for single-sided linedefs to NOT skew their midtextures ...but it doesn't work because it doesn't stop the skewing code from running instead, regardless of whether Effect 1 is on or not. If it's decided single-sided line midtextures shouldn't do this though, the non-skew code could just as well be thrown out lol (or something else I guess?)
When I first wrote this, I thought the .h file that contained a function declaration needed to have the same name as the .c file the function was in. Now I know that's not the case, off to p_local.h with you.
Two interesting points of note:
* The touchspecial sector flag seems to actually do its job now.
* Detection of sectors with polyobjects in seems to have done this incorrectly, but this doesn't mess with anything about touching the polies themselves so it seems to really only handle edge cases where the polyobject was too close to the border of another sector (which would've likely made rendering glitches anyways).
* There was a whole swathe of teetering code that was basically never run properly because of this mistake. I did a simple fix at first, but you started teetering whenever you were slightly less than your radius away from a sector's edge, which was completely different and undesirable behaviour. Instead, I cut out the code that was never running, and just left the hacky method in instead since it was more accurate to what we want in general.
Issue was caused by attempting to traverse the sector's thing-touching-list across all the things in the sector (which would inevitably have the same sector as the first node in mobj->touching_sectorlist) instead of traversing the thing's sector-touching-list (which has the same thing but different sector references).
I wonder how many times AJ copypasted this code with absolutely no idea why it wasn't working properly. I'll figure that out tomorrow, maybe set up some compiler macros so this mistake is never made again. For now, I must sleeb.
Behaves ALMOST as you'd expect. It gets the z position of the slope at the player coordinates when it comes to the sectorlist check (which is first), though, so there's a few oddities that are amplified with steep slopes:
* If the slope's sloping away from you at a steep angle, you might not be able to step down onto it, but you won't teeter (because it's at a step-down-able height if it extended to directly beneath you)
* If the slope's sloping towards you at a steep angle, you might end up in teetering frames when you're able to step down onto it (because it's NOT at a step-down-able height if it extended to directly beneath you)
HOWEVER, it would be pretty obnoxious to hold back code which is functionally superior in every way otherwise, and it doesn't really seem like there's a good way to get that checked tbph
Also updated any relevant project files that I can think of to include the new files, as well as the makefile of course. Some of the other project files haven't been touched in years so I'll leave those alone ...unless someone objects
Basically this makes sure numwadfiles is updated before loading the SOC/Lua scripts, so if a Lua script calls COM_BufInsertText with the contents "addfile scr_mysticrealm.wad" it can't overwrite the last written wadfile slot! Not that COM_BufInsertText really should be used like that to begin with
*Didn't take into account object scale
*Doubled force when on the ground (ignore what the comment of the line I moved says, it was relevant for slopes...)
This also led to a mistake with slopes, where I was double-multiplying by the gravity constant to get half (because of a quirk of numbers...)
Also took the opportunity to nuke or otherwise neuter a bunch of Kalaron's bizzare ramblings (most are questions which have long-been answered by Red's efforts) at the same time.
*The No Physics flag now works (Red, you might want to doublecheck this to see whether I haven't missed any eosteric stuff out). Going downhill is a little bumpy, and I'm not sure whether that's good or not. Someone help me out here?
*The SRB2CB typeshims are now behind #ifdef ESLOPE_TYPESHIM instead of #if 1 for easier disabling.
*Slopes' downhill thrusts are now scaled with regards to object gravity. This is actually untested in gravities other than normal and reverse normal but it's one line which can be easily reverted in that circumstance. I also checked with MI to make sure this is how it's calculated elsewhere, so fingers crossed this doesn't cause any edge cases.
*As a consequence of the above point, there's now a function in p_mobj.c/h that returns an object's internal gravity - seperated out from the logic of P_CheckGravity, which really didn't need to be so monolithic. Multiply by global gravity to get the thrust. This should probably be available to Lua somehow, but I have absolutely no idea where to start with that. Wolfs, maybe?
Non-comprehensive test file available at /toaster/slptst3.wad on the ftp.
Do we really need to keep it around? If not, I say get rid of it. It seems like useless clutter that is just going to confuse people who are trying to understand the source code.
* -lSDL2_mixer is already added to SDL_LDFLAGS by default, unless NOMIXER=1 is set
* -DSDLMAIN should also be added to OPTS by default for MINGW=1 builds, unless NOSDLMAIN=1 is set
NiGHTS hotfix
Fixes the following issues relating to playing as NiGHTS Super Sonic that apparently popped up between 2.1.14 and next (mostly due to the changes to SRB2's trig stuff it seems):
* Super Sonic drifts to the side at some angles around an axis, and is unable to go directly upwards or downwards as a result
* Drilling to the side when on the ground causes the drill sound to constantly restart
* CEZS's start not actually being lined up properly with the first axis means the player is not able to go backwards along the track (because the player is not actually aligned with the track properly, preventing you from touching the attached line transfer)
* trying to hug some walls such as the tall wall before the library section of CEZS allows Super Sonic to go through them
These fixes needs proper testing before this branch can be merged in, in case they accidentally break other things as a result or something.
See merge request !71
Basically I kind of worked around any potential trig inaccuracies by not using the player position directly for setting momx/momy. This way, if player->angle_pos == player->old_angle_pos, momx/momy are zero
Demo replay fixes
Changes made/bugs fixed in this branch:
* Replay camera is now controllable when climbing (https://mb.srb2.org/showthread.php?t=38668), and in waterslides
* localangle (read: the angle between you and the camera, I think) now doesn't change during demo replays in most situations, unless the player is in analog mode. Exceptions include zoomtubes and NiGHTS super
* Replay camera now doesn't act silly if the player is in analog mode (assuming you also recorded it in that mode to begin with, anyway)
See merge request !66
DO NOT MERGE THIS INTO THE INTERNAL REPO. This is a temporary 2.1.15 only fix. This commit allows an optional boolean for tan(), which when true will automatically shift angles by ANGLE_90.
the most common condition (correct drawing) shouldn't be last, however it can't be first without making the conditions longer anyway.
it's a nitpicky thing, but this is the renderer we're talking about here.
i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs
Previous overflow fix resulted in extra tall FOFs disappearing up close (see: ERZ1's elevators at start)
This works "better" in that only some lighting bugs and really really finicky visual glitches show now. I give up trying to totally fix this stuff dfsdfgdgf
One more name in the credits
I probably messed up by making toast_credits based on master instead of next. If that's blocking, just delete this branch and I'll re-do it. It's a single line, though - shouldn't exactly matter so much.
Could probably stand to be merged into Internal as well, since I hadn't actually worked on any textures when we'd updated the credits there.
See merge request !69
Fix portal and plane/sky interaction
More portal-related fixes:
* Fixes rendering issue 4 from issue #21 (Slope planes render with wrong height values when visportals are visible on-screen)
* Fixes sky rendering through portals, so that the sky you see through each portal is what you'd expect to see if you were actually there. Easiest way to see what I mean is through sky 22's planet, in a map with portals at 90 degrees to the other sides respectively (the example map on the wiki for ld40, for instance).
See merge request !65
The idea is for the layman Lua user to understand better what range of values to use for mobj types, states, sfxs, player #s etc. Additionally, mobjinfo/states/sfxinfo/hudinfo tables all now have actual bound checks when accessing/editing them. Yikes, why didn't they have any before?!
Slope fixes
This branch fixes the following slope-related physics and rendering bugs:
* Rings in multiplayer stages respawning inside slopes (even despite being able to spawn ABOVE them on map load)
* Player starts spawning players inside slopes
* Elemental flame trails not appearing if a player spindashes UP a slope; see issue #21
* Dying players "jumping" off slopes to the side if they were previously standing on one
* Some issues with FOF slope rendering
* Various issues with sprites displaying through walls adjacent to slopes
Other features added:
* Objectplace now supports slopes (this is Inuyasha's doing)
* Automap in DEVMODE now supports slopes (my doing)
Just making this merge request now rather than later, ~~in case I decide not to make any more fixes for the time being~~ (this branch doesn't seem to want to die lol), and so we can get these merged in as soon as the code's all been checked over.
See merge request !50
xorshift* PRNG
This needs testing to ensure I didn't mess anything up switching function names around.
Our PRNG sucks. This is probably obvious. I wish I had known better at the time I implemented it, but oh well.
The replacement is an xorshift* PRNG variant with period 2^32 - 1 (meaning that the PRNG state will loop after four billion calls ... that's not likely to happen), versus the old PRNG's period of about 2^22 (?). The output is also much more random and less predictable; the old PRNG would fall into a predictable loop of output after about 4000 numbers were generated, which isn't much.
The PRNG here also outputs numbers as fixed point from [0,1) (that's 0 to FRACUNIT-1, in other words) instead of single bytes at a time. This makes it much easier to calculate things for, say, P_RandomRange and P_RandomKey. A new macro, P_RandomChance(p), is now in use that returns true _p_ percent of the time, where _p_ is a fixed_t probability from 0 (0%) to FRACUNIT (100%).
This doesn't affect netgames at all; the code for seed saving and restoring is identical (aside from a check to prevent seed being set to 0, which breaks xorshift PRNGs). Demos break, but A: _duh_ and B: they're already broken by all the changes to physics to accommodate slopes.
P_Random is deprecated in Lua, as the function was renamed to P_RandomByte. Aside from that, nothing special.
See merge request !64
* add skidtime, which we forgot before 2.1 release apparently
* change tics from INT16 to INT32
* change eflags from UINT8 to UINT16
* change actionspd/mindash/maxdash from INT32 to fixed_t
Until we use something besides Native MIDI to play
back MIDI music, MIDI volume changing is disabled
since it causes way too much of a damn headache.
(It's not even our fault, it's fucking MS.)
