Spr2 freeslots
Needed for Miles, generally a good idea to have around anyway. Considering Miles uses it without problems, seems to work fine.
See merge request !24
for some apparent reason the compiler didn't like the while loop condition edit on its own (it complained about inline failures for P_MobjReadyToTrigger for some reason), so I had to add that extra bit above the while loop... and it was happy again, huh
If you want more specifics, sloped FOFs are to blame it turns out: sometimes the bottom of an FOF wall blocking a segment of an in-level wall column can be considered ABOVE the top part of the FOF there (yikes), and then the dc_y* values go offscreen, and then BOOM
Software crashes fix... fix
Fixes a typo introduced by merge request !75 that caused upper textures to set the wrong ceiling clipping value when not visible, allowing all sorts behind the walls to be visible. This is most noticable in GFZ2 when the inside of the tunnel section is visible
...probably a good idea to make sure this one doesn't introduce any MORE visual glitches by mistake (again, compare with 2.1.15 if possible)
See merge request !93
Fix for flats with transparent pixels on slopes
This fixes how R_DrawTiltedSplat_8 unintentionally allows the cyan pixels to NOT be considered "transparent" if after being remapped, depending on sector brightness and/or linedef type 606 colormaps, the result of remapping is not palette index 247 (the cyan we typically turn transparent). That is, the original colors from the source flat graphic are not checked, but instead the __result__ of coloring the flat under the respective colormap is checked for "transparent" pixels. This is only a problem for the tilted splat drawing function, not the regular one for non-sloped planes with cyan-pixel-using flats.
I found out about this bug from the issues Ritz was having with sloped 255-alpha translucent FOFs using transparent flats and his custom COLORMAP lump (and later when he applied a linedef type 606 colormap to the FOF) for his custom map. Thankfully he has some workarounds, but this should fix the code-side issues that caused his problems in the first place.
I also fixed stuff with another splat drawing function that's not currently used atm (maybe it will be in the future, if splats themselves are ever enabled again? *shrugs*).
See merge request !92
Skybox rendering offset fix for third person/alt view camera
Fixes the issue reported in this thread: https://mb.srb2.org/showthread.php?t=41729
I dunno if this will negatively affect any existing skyboxes in SRB2's own levels, that said. I tried out THZ2 and CEZ1 with this fix at least but I forgot to compare them with how they are in 2.1.15 so _*shrugs_*
See merge request !94
OS X Makefile build setup
This merge request:
* Cleans up the OS X bundle resource location code and fixes a SIGSEGV and memory leak
* Simplifies and fixes the OS X desktop alert code, closing more leaks
* Adds the MACOSX build flag to the Makefiles, to allow building a binary (but not Mac app yet) of SRB2.
This is intended to make it easier for developers to build on Mac OS X, without having to pull in all of XCode. You can keep using CMake if you prefer.
To test, use `make -C src MACOSX=1 NONX86=1 SDL=1 NOASM=1` for a release build.
Left to do:
* Add a content bundling script to be run after building, and a flag to trigger doing that.
`MACOSX_BUNDLE` maybe?
* Somehow get access to a Mac running PowerPC and figure out how to build a multi-platform binary.
* Add the proper magic to compile using gcc if requested. (Right now, compilation is done via LLVM/Clang)
See merge request !72
Gas jets, fan objects, springs and slopes
Whoop whoop whoop minor bugs that only get noticed due to weird experiments whoop whoop whoop
* For gas jets only: the object's standingslope is ALWAYS null. No drifting down the slope for you.
* For gas jets and fan objects: Now checks whether the player's top is below the bottom of the launcher, instead of its bottom. zdist calculation not affected, since it's signed and okay with being negative by about the height of the player.
* For all 3: the player's standingslope is NULL'd so the player isn't launched off at a wacky angle if they're standing on a slope then walk into the thing.
See merge request !91
Remove i_net.c
The code in i_net.c doesn't actually seem to be used in SRB2. I was able to compile a build without it, and hosting and joining netgames worked just fine (well, as fine as they can with the current state of the netcode...).
The vast majority of code in the file seems to be contained in HAVE_SDLNET ifdefs, and I'm pretty sure SRB2 has never used SDLNET in a public build. The only bit not contained in that block is I_InitNetwork(), which just prints an error and returns false.
Do we really need to keep it around? If not, I say get rid of it. It seems like useless clutter that is just going to confuse people who are trying to understand the source code.
See merge request !73
Re-factoring AA tree code from m_misc.c/m_misc.h into its own files
What the title says. The AA tree-related code now lives in the files m_aatree.c and m_aatree.h. Part of why I did this was to solve this m_misc.h/w_wad.h cyclic dependency problem (involving MAX_WADPATH and AA trees themselves) mentioned in the now-removed comments, another reason was ...only OpenGL uses AA trees at all, why include the relevent structs/functions/otherwise anywhere except where is necessary (which is very few files as it turns out)?
Otherwise, it just looked better on its own rather than mixed with all the other stuff already in the m_misc files. Not really important or anything affecting gameplay at all I guess.
See merge request !82
* When moving slowly, P_InstaThrust at S_SKIN's maxdash forward, and set momz to S_SKIN's mindash upwards. Plays a tok noise (not thok). Hurts enemies/bosses, busts spikes/monitors/all types of bustable blocks.
* When moving quickly... doesn't do anything yet, but WILL do a slide.
Also, P_DoSpinDash is now renamed to P_DoSpinAbility, and CA_TWINSPIN users can bust all bustable blocks on collision too.
* CA_TWINSPIN - you can do it multiple times
* CA_DOUBLEJUMP - your jump height is reduced each time, like in Kirby games. The number of extra jumps once you've left the ground that are available is determined by the character's actionspd.
* Electric sparks coming off entire body instead of bubbles coming out mouth
* Different sounds.
* Different icons.
These sprites are currently local only, but I'll be doing a lot of asset updating this evening since Rob asked me to so it won't be long until you can get them.
Sideways springs, horizontal hog-launchers, perpendicular plungers...
Call them what you like, they're in the code now. And have been for months!
Nev3r uses the hell out of these and I'm fed up of them being <!>'s all over the place, so please have 'em in master so we can update srb2.srb and make things better for all of us.
See merge request !30
* FF_MIDDLESTARTCHANCE - has a 50% chance of starting the spr2 or FF_ANIMATE animation halfway in
* FF_SPR2ENDSTATE - if var1 == S_NULL, don't loop, just stop incrementing the frames. Otherwise, go to the state represented by var1.
The former is just something I did for fun, the latter is something that'll come in handy when porting in new-character-moves.
Setup:
* S_SKIN needs an "availability" line. Set to 0 to have always available, otherwise is assumed to be UINT8 unlockable number. If it's a valid unlockable, its name will be copied over with the character's realname.
* Define an unlockable via SOC or hardcode. If you don't want it visible on the Secrets menu, just set its type to None. Everything else is as normal - you can set the conditionset to whatever, objective, height, nochecklist, nocecho...
* radius - sets the player's radius for that skin.
* height - sets the player's normal height for that skin.
* spinheight - sets the player's spinheight for that skin.
* shieldscale - see http://i.imgur.com/BQ5DhKC.png for justification
R_SkinUnlock defines the circumstances under which a skin is available. For simplicty's sake, I've currently bound it to an S_SKIN variable so I can toggle it easily, but it WILL be replaced with a hook into the savegame system at some point.
* Currently has three tiers of unlock - freebie (forceskin or modeattacking via a loaded replay), Ringslinger Only, and SP/Coop and Ringslinger.
* I don't know anything about netcode so I basically decided to make R_SkinUnlock relevant only under local circumstances, try as hard as possible to stop bad skin info from getting sent to the server, and then admit defeat once the server has the information. If this is a bad choice, please discipline me and show me how to fix it.
* Character Select now checks for whether the character is hidden or not on menu load and does/undoes it based on that info, but will never touch one disabled via SOC. I also used this opportunity to optimise, checking for/filling out charsel pictures instead of doing it later. (It now also includes special casing for a select screen with zero characters!)
* Mode Attack now hides hidden characters in its character select based on SP rules.
Things that still need to be done:
* ForceSkin_OnChange. Is there a graceful way to handle this?
* No obvious skin name conflicts. Add a salt to the names of hidden skins, and then remove it when they're unhidden?
* The gap between Knuckles' skin number and the first custom character anybody adds will be way too obvious. A seperate hidden skin numbering system? Start at 32 and count up from there? There's a few ways...
* If a character select character image is not set, don't iterate every tic - iterate on first image get and then save to the struct.
* A character select screen with only two characters now has special case handling.
* A memory leak in the making has been plugged. (specifically, picname not being Z_Free'd if the loop fails to do so)
* Logic/operation simplification.
Also, some typo corrections and clarity case movements of stuff in other files I've been looking at.
* SF_NOJUMPSPIN - Player's height is full whilst jumping, SPR2_JUMP defaults to SPR2_SPNG instead of SPR2_SPIN, and the player goes into fall frames if they start moving downwards or use their ability.
* PA_JUMP - for jumping (upwards in the case of SF_NOJUMPSPIN.
* SF_NOJUMPDAMAGE - Ala rosy.wad, don't damage enemies, etc when jumping into them.
* SF_STOMPDAMAGE - Just for fun. Ala in Mario, always damage enemies when you land on top of them (your gravity reference, not theirs).
* SF_MARIODAMAGE - SF_NOJUMPDAMAGE|SF_STOMPDAMAGE is reasonably accurate to the Mario games, and might as well be surfaced as such.
Also, a minor change:
* Instead of not spawning the revitem if your SPR2_ is SPR2_DASH, don't spawn it if it's set to 0. This requires the player.dta I uploaded a couple days ago to behave as it was previously.
* Don't get stuck in spindash frames if your maxdash is 0, and don't flash rolling frames if you're on goop.
* Characters disabled through SOC are outright removed. No awkward gap in scrolling - no hint they were ever there in the first place.
* Vertical loop - the character select images are visually continuous. No matter where you are in the chain, you'll always see a hint of the character above or below your current selection in the chain.
* Smooth scrolling - Moto and Prime showed me a gfy from back during 2.1 development where it was super smooth. I didn't make it as slow as that one, but the smoothness was easy to add and the reason it was removed previously - gaps in the character select leading to varying speeds - is no longer relevant.
* SPR2_PEEL, SPR2_SPEE.
* S_PLAY_PEEL, S_PLAY_SUPER_PEEL.
* PA_PEEL.
* Dashmode actually starts charging from runspeed instead of the arbitrarily calculated (normalspeed - 5*FRACUNIT). This just made things easier, honestly, and it's 1 FU of difference compared to the current test case.
- Now checks whether the player's top is below the bottom of the fan/gas jet, instead of its bottom. zdist calculation not affected.
- mo->standingslope is NULL'd so the player isn't launched off at a wacky angle. (I also did this for springs, since Prime mentioned it was a problem for them too.)
Some slope improvements/fixes (plus P_GetMobjGravity)
Dear Red, I did some things.
* Made the slope flag SL_NOPHYSICS actually have an effect like we wanted to, but didn't get around to implementing yet - activated by setting the slope's linedef flags to have ML_NOSONIC.
* Made downhill slope thrusts proportional to an object's gravity and friction.
* To make the above happen - seperated out the gravity value finding code in P_CheckGravity into a seperate function, P_GetMobjGravity. (p_mobj.c, p_local.h) I also made this function available to Lua.
* Turned those PANIC n console messages (which would inevitably be followed up with a crash, since we're accessing invalid memory immediately after) into a descriptive I_Error.
* Put the SRB2CB type-shimming behind an ESLOPE_TYPESHIM ifdef.
* Removed SPRINGCLEAN-ifdef'd code.
* Cleaned up some eosteric comments.
* NEW SINCE RED +1'd THIS: The teetering code now takes slopes into account pretty well. There are edge circumstances as outlined in commit 9d221f4f3f, but this is unilaterally better behaviour in every way and the teetering code was kind of a mess anyways.
* NEW SINCE RED AND ALAM +1'd THIS: P_ReverseQuantiseMomentumToSlope. Simple function that replaces the inverse angle stuff (which also wasn't using InvAngle, just ANGLE_MAX - angle - which is inaccurate!!)
Current testing files available at /toaster/slptst3.wad and /toaster/gravitytest.lua on the ftp.
I want to do more to the branch like implement SL_ANCHORVERTEX in the near future, but this is probably safe to merge in its current state.
See merge request !77
The whole thing needs a refactor in general, but it's almost 2am here, I need my sleeb, and this fix would probably break something with 2.1 climbing if I made it any more/less (depending on viewpoint) complicated.
Sectorlist traversal
MOM GET THE CAMERA
There's a LOT of code in the source that ended up mixing m_snext (the node for the next thing in the sector's thinglist) and m_tnext (the node for the next sector in the thing's sectorlist), so I renamed the following:
* m_snext ==> m_thinglist_next
* m_sprev ==> m_thinglist_prev
* m_tnext ==> m_sectorlist_next
* m_tprev ==> m_sectorlist_prev
Then, I changed all the instances where the code was trying to go m_thinglist_next on a mobj's touching_sectorlist (which would've just gone to the node for the next thing in the same sector, instead of the node for the next sector for the same thing). Notable samples:
* FF_SHATTER blocks now disappear the moment you go into their sector. You still can't give FF_SOLID to them because in that case they will still stop you if you never enter their sector at all (ie - clip on corners), but having them nonsolid no longer allows you to phase through entirely without busting them (which was the whole downside of making them intangible in the first place).
* You can now bump into multiple Mario blocks at a time, even if you're not exclusively in their sector.
* No more getting randomly stopped on the edges of bouncy FOFs.
* Landing on polyobjects might behave a little more consistently at the edge of their host sector.
* Teetering did a SHITTON of code that basically never got executed, and then had directly-blockmap-accessing code as a backup. The code was activatable by replacing the m_thinglist_next with m_sectorlist_next, but it behaved SUPER differently from what we're used to with teetering (if the player mobj's edge was JUST off the edge of a platform, you ended up in teetering frames - even if it looked like you could stand) so I ended up removing that section entirely.
Any objections?
See merge request !85
Fixes and changes related to the act of setting up a level (in other words, setup fixes)
Changes made in this branch so far:
* a REJECT lump of zero length (NOT to be confused with a REJECT lump of non-zero length with all-zeros, just to clarify) should no longer cause problems with netgames and otherwise. The game now checks if the lump exists, has the right name, and length is not zero - if it fails any of these, the REJECT lump is not loaded and P_CheckSight won't be allowed to use it. This means ZDBSP (no reject) should be safe(r) to use now!
* there's now a simple devmode-only message (requires "Setup" mode) if a sector is found to have no lines at all during setup. It's a far cry from the plot to I_Error the game I once had for that unsusal scenario, but such a level still works anyway so whatever.
See merge request !87
FF_REVERSEPLATFORM clipping
Ran into an issue whilst testing out one last feature (there's always one more...) for flat_alignment_revamp. This is a backported fix.
The bug was such that if you're falling through a platform with FF_REVERSEPLATFORM and not FF_PLATFORM, you'll be pushed downwards such that your head is against the bottom of the FOF. This just checks momz is greater than zero if it has FF_REVERSEPLATFORM to make sure it's okay to set ceilingz. (OR the alternative in reverse gravity.)
No test map because this was originally done for internal. Instead, test it on the other branch's test map.
See merge request !83
Software crashes fix
This branch SHOULD fix the many crashes people have reported lately that all point to the software renderer. Simply put, the software renderer allowed stuff to be drawn out of the screen even though that wasn't safe, and even the existing checks to prevent that didn't work.
If you saw me worrying about the sky HOMs I discovered in AGZ earlier in the commits for this branch, don't worry - it turns out that issue already existed in 2.1.15's srb2win.exe (and probably srb2dd.exe too) anyway, the changes in this branch didn't cause them. Hopefully nothing else broke then.
See merge request !75
Also, the teetering angle on slopes is now FRACUNIT/2 because there's literally no way to stand still on a slope that steep unless it doesn't have physics.
This means the current skewing-by-default effect isn't changed, and OpenGL's equivalent code doesn't have to be touched since apparently it was already like that.
This should mean that maps built with ZBSDP (no reject) should have less or no problems in netgames compared to the standard ZenNode maps now, hopefully. =)
note: once this is merged into internal, you should probably remove me from "programming assistance" so i'm not duplicated for no clear reason. unless you want me to slowly take over every section in the credits >:3c
"frontsector" in this part of the code isn't actually the polyobject's sector for back-side polyobject segs, it's the in-level sector the polyobject as a whole is being rendered in it turns out.
Red apparently left in code for single-sided linedefs to NOT skew their midtextures ...but it doesn't work because it doesn't stop the skewing code from running instead, regardless of whether Effect 1 is on or not. If it's decided single-sided line midtextures shouldn't do this though, the non-skew code could just as well be thrown out lol (or something else I guess?)
When I first wrote this, I thought the .h file that contained a function declaration needed to have the same name as the .c file the function was in. Now I know that's not the case, off to p_local.h with you.
Two interesting points of note:
* The touchspecial sector flag seems to actually do its job now.
* Detection of sectors with polyobjects in seems to have done this incorrectly, but this doesn't mess with anything about touching the polies themselves so it seems to really only handle edge cases where the polyobject was too close to the border of another sector (which would've likely made rendering glitches anyways).
* There was a whole swathe of teetering code that was basically never run properly because of this mistake. I did a simple fix at first, but you started teetering whenever you were slightly less than your radius away from a sector's edge, which was completely different and undesirable behaviour. Instead, I cut out the code that was never running, and just left the hacky method in instead since it was more accurate to what we want in general.
Issue was caused by attempting to traverse the sector's thing-touching-list across all the things in the sector (which would inevitably have the same sector as the first node in mobj->touching_sectorlist) instead of traversing the thing's sector-touching-list (which has the same thing but different sector references).
I wonder how many times AJ copypasted this code with absolutely no idea why it wasn't working properly. I'll figure that out tomorrow, maybe set up some compiler macros so this mistake is never made again. For now, I must sleeb.
