* FF_MIDDLESTARTCHANCE - has a 50% chance of starting the spr2 or FF_ANIMATE animation halfway in
* FF_SPR2ENDSTATE - if var1 == S_NULL, don't loop, just stop incrementing the frames. Otherwise, go to the state represented by var1.
The former is just something I did for fun, the latter is something that'll come in handy when porting in new-character-moves.
* radius - sets the player's radius for that skin.
* height - sets the player's normal height for that skin.
* spinheight - sets the player's spinheight for that skin.
* shieldscale - see http://i.imgur.com/BQ5DhKC.png for justification
* If a character select character image is not set, don't iterate every tic - iterate on first image get and then save to the struct.
* A character select screen with only two characters now has special case handling.
* A memory leak in the making has been plugged. (specifically, picname not being Z_Free'd if the loop fails to do so)
* Logic/operation simplification.
Also, some typo corrections and clarity case movements of stuff in other files I've been looking at.
* SF_NOJUMPSPIN - Player's height is full whilst jumping, SPR2_JUMP defaults to SPR2_SPNG instead of SPR2_SPIN, and the player goes into fall frames if they start moving downwards or use their ability.
* PA_JUMP - for jumping (upwards in the case of SF_NOJUMPSPIN.
* SF_NOJUMPDAMAGE - Ala rosy.wad, don't damage enemies, etc when jumping into them.
* SF_STOMPDAMAGE - Just for fun. Ala in Mario, always damage enemies when you land on top of them (your gravity reference, not theirs).
* SF_MARIODAMAGE - SF_NOJUMPDAMAGE|SF_STOMPDAMAGE is reasonably accurate to the Mario games, and might as well be surfaced as such.
Also, a minor change:
* Instead of not spawning the revitem if your SPR2_ is SPR2_DASH, don't spawn it if it's set to 0. This requires the player.dta I uploaded a couple days ago to behave as it was previously.
* Don't get stuck in spindash frames if your maxdash is 0, and don't flash rolling frames if you're on goop.
* SPR2_PEEL, SPR2_SPEE.
* S_PLAY_PEEL, S_PLAY_SUPER_PEEL.
* PA_PEEL.
* Dashmode actually starts charging from runspeed instead of the arbitrarily calculated (normalspeed - 5*FRACUNIT). This just made things easier, honestly, and it's 1 FU of difference compared to the current test case.
- Now checks whether the player's top is below the bottom of the fan/gas jet, instead of its bottom. zdist calculation not affected.
- mo->standingslope is NULL'd so the player isn't launched off at a wacky angle. (I also did this for springs, since Prime mentioned it was a problem for them too.)
Sectorlist traversal
MOM GET THE CAMERA
There's a LOT of code in the source that ended up mixing m_snext (the node for the next thing in the sector's thinglist) and m_tnext (the node for the next sector in the thing's sectorlist), so I renamed the following:
* m_snext ==> m_thinglist_next
* m_sprev ==> m_thinglist_prev
* m_tnext ==> m_sectorlist_next
* m_tprev ==> m_sectorlist_prev
Then, I changed all the instances where the code was trying to go m_thinglist_next on a mobj's touching_sectorlist (which would've just gone to the node for the next thing in the same sector, instead of the node for the next sector for the same thing). Notable samples:
* FF_SHATTER blocks now disappear the moment you go into their sector. You still can't give FF_SOLID to them because in that case they will still stop you if you never enter their sector at all (ie - clip on corners), but having them nonsolid no longer allows you to phase through entirely without busting them (which was the whole downside of making them intangible in the first place).
* You can now bump into multiple Mario blocks at a time, even if you're not exclusively in their sector.
* No more getting randomly stopped on the edges of bouncy FOFs.
* Landing on polyobjects might behave a little more consistently at the edge of their host sector.
* Teetering did a SHITTON of code that basically never got executed, and then had directly-blockmap-accessing code as a backup. The code was activatable by replacing the m_thinglist_next with m_sectorlist_next, but it behaved SUPER differently from what we're used to with teetering (if the player mobj's edge was JUST off the edge of a platform, you ended up in teetering frames - even if it looked like you could stand) so I ended up removing that section entirely.
Any objections?
See merge request !85
Also, the teetering angle on slopes is now FRACUNIT/2 because there's literally no way to stand still on a slope that steep unless it doesn't have physics.
Two interesting points of note:
* The touchspecial sector flag seems to actually do its job now.
* Detection of sectors with polyobjects in seems to have done this incorrectly, but this doesn't mess with anything about touching the polies themselves so it seems to really only handle edge cases where the polyobject was too close to the border of another sector (which would've likely made rendering glitches anyways).
* There was a whole swathe of teetering code that was basically never run properly because of this mistake. I did a simple fix at first, but you started teetering whenever you were slightly less than your radius away from a sector's edge, which was completely different and undesirable behaviour. Instead, I cut out the code that was never running, and just left the hacky method in instead since it was more accurate to what we want in general.
Issue was caused by attempting to traverse the sector's thing-touching-list across all the things in the sector (which would inevitably have the same sector as the first node in mobj->touching_sectorlist) instead of traversing the thing's sector-touching-list (which has the same thing but different sector references).
I wonder how many times AJ copypasted this code with absolutely no idea why it wasn't working properly. I'll figure that out tomorrow, maybe set up some compiler macros so this mistake is never made again. For now, I must sleeb.
*Didn't take into account object scale
*Doubled force when on the ground (ignore what the comment of the line I moved says, it was relevant for slopes...)
This also led to a mistake with slopes, where I was double-multiplying by the gravity constant to get half (because of a quirk of numbers...)
*The No Physics flag now works (Red, you might want to doublecheck this to see whether I haven't missed any eosteric stuff out). Going downhill is a little bumpy, and I'm not sure whether that's good or not. Someone help me out here?
*The SRB2CB typeshims are now behind #ifdef ESLOPE_TYPESHIM instead of #if 1 for easier disabling.
*Slopes' downhill thrusts are now scaled with regards to object gravity. This is actually untested in gravities other than normal and reverse normal but it's one line which can be easily reverted in that circumstance. I also checked with MI to make sure this is how it's calculated elsewhere, so fingers crossed this doesn't cause any edge cases.
*As a consequence of the above point, there's now a function in p_mobj.c/h that returns an object's internal gravity - seperated out from the logic of P_CheckGravity, which really didn't need to be so monolithic. Multiply by global gravity to get the thrust. This should probably be available to Lua somehow, but I have absolutely no idea where to start with that. Wolfs, maybe?
Non-comprehensive test file available at /toaster/slptst3.wad on the ftp.
NiGHTS hotfix
Fixes the following issues relating to playing as NiGHTS Super Sonic that apparently popped up between 2.1.14 and next (mostly due to the changes to SRB2's trig stuff it seems):
* Super Sonic drifts to the side at some angles around an axis, and is unable to go directly upwards or downwards as a result
* Drilling to the side when on the ground causes the drill sound to constantly restart
* CEZS's start not actually being lined up properly with the first axis means the player is not able to go backwards along the track (because the player is not actually aligned with the track properly, preventing you from touching the attached line transfer)
* trying to hug some walls such as the tall wall before the library section of CEZS allows Super Sonic to go through them
These fixes needs proper testing before this branch can be merged in, in case they accidentally break other things as a result or something.
See merge request !71
Slope fixes
This branch fixes the following slope-related physics and rendering bugs:
* Rings in multiplayer stages respawning inside slopes (even despite being able to spawn ABOVE them on map load)
* Player starts spawning players inside slopes
* Elemental flame trails not appearing if a player spindashes UP a slope; see issue #21
* Dying players "jumping" off slopes to the side if they were previously standing on one
* Some issues with FOF slope rendering
* Various issues with sprites displaying through walls adjacent to slopes
Other features added:
* Objectplace now supports slopes (this is Inuyasha's doing)
* Automap in DEVMODE now supports slopes (my doing)
Just making this merge request now rather than later, ~~in case I decide not to make any more fixes for the time being~~ (this branch doesn't seem to want to die lol), and so we can get these merged in as soon as the code's all been checked over.
See merge request !50
P_RandomChance is now a macro for something that should happen a
certain percentage of time.
P_SignedRandom was moved to a macro. Nobody cared.
# Conflicts:
# src/p_inter.c
Rob request player anims
[21:44:35] <@Rob> As far as I can tell the player-anims that I requested work
[21:44:45] <@Rob> That can probably be merged at this point
See merge request !22
* SPR2_JUMP and SPR2_SJMP are now the jump sprite sets for spin chars
* SPR2_SPNG and SPR2_SSPG are the new sprite sets for spring up anims (instead of JUMP/SJMP)
* S_PLAY_JUMP and S_PLAY_SUPER_JUMP are now the states for spin char jumps
* S_PLAY_SPRING and S_PLAY_SUPER_SPRING are the new states for spring up (instead of the "JUMP" states)
* PA_JUMP is now PA_SPRING (jumping anims are lumped with PA_ROLL)
Compiling errors fixed in this commit:
* Various cases of mixed declaration and statement code
* Implicit declaration of slope functions (read: you forgot to put "include "p_slopes.h" in MORE than a few places)
* an odd case of a bad fixed_t to float typecase, cause by using P_GetZAt directly inside FIXED_TO_FLOAT
* a few minor cases of bad unsigned-signed comparisons
* no prototypes for some of the new slope functions. For goodness sake Red, this is basic stuff!
It's a lot nicer in general, honestly. I think a couple bugs with custom monitors respawning got fixed in the process.
Note that a monitorgfx.wad is needed if you want to see things besides <!>s for monitors, due to graphic changes.
Compiling errors fixed in this commit:
* Various cases of mixed declaration and statement code
* Implicit declaration of slope functions (read: you forgot to put "include "p_slopes.h" in MORE than a few places)
* an odd case of a bad fixed_t to float typecase, cause by using P_GetZAt directly inside FIXED_TO_FLOAT
* a few minor cases of bad unsigned-signed comparisons
* no prototypes for some of the new slope functions. For goodness sake Red, this is basic stuff!
Oops. (Minor animation bugfix I forgot.)
Apparently I pushed this one commit to GitHub instead of SRB2Internal before the branch was merged...
Oops.
See merge request !8
*player->health (formerly the "HUD" health) is now to be known as player->rings, and now acts as the player's actual ring count
*player->mo->health (formerly rings + 1) is now always 1 when alive, regardless of ring count; if player with rings is damaged, this is untouched
Damage in normal SP/Coop gameplay has been tested and still works fine; still a lot of mess to clear up though
Tag damaging probably is broken now, I'll fix this later
New player animations (Updated player.dta Sonic)
Adds support for several completely new player animations, mostly for Super Sonic.
See merge request !5
This commit makes Super floating players break into
a normal walk again when they hit the floor, instead
of keeping their float animation on the ground.
Goo Water (THZ Goop) adjustements
At Nev3r's request:
Adjusted goop so that you spend less time bouncing around in it. The goop will become a walkable surface with a higher velocity threshold.
The actual goop physics haven't been altered as far as the initial entrance and underwater time is concerned, only leaving goop and subsequent bounces has been dampened significantly.
See merge request !7
Re-add/fix broken platform momz mobj code.
The changes in this branch re-add the platform's momentum to players and mobjs which leave the platform (eg. by jumping) so that they move with relative velocity as expected. This behavior was unintentionally broken in SRB2 2.0, which adds a lot of artificial difficulty to certain segments of the levels, where you have to jump between high velocity moving platforms which seemingly cut your jump height to nothing.
Not only has the behavior been fixed, but it has now been enhanced to move the camera while free-falling between platforms as well, completing the illusion of full relative velocity with minimal hiccups. [Observe.](http://i.imgur.com/zmSfUyp.gifv)
See merge request !14
This fixes the issue with upside-down springs shooting downwards if you touch another of its kind. Also fixes one of the issues with monitors in Icicle Falls (after you phase inside the East-most float-bob FOF's monitor via the other bug and jump up to break it while there, the NEXT monitor moves upwards too)
Here's how it works: When a player walks off the
moving platform, it applies their pmomz once, and
then _keeps pmomz set_ so that the camera still
adds pmomz to its movements until they hit another
floor. This way, the camera doesn't jerk around.
