diff --git a/src/doomdef.h b/src/doomdef.h index 7f641558f..e5fa3a482 100644 --- a/src/doomdef.h +++ b/src/doomdef.h @@ -502,4 +502,11 @@ extern const char *compdate, *comptime, *comprevision, *compbranch; /// \note Required for proper collision with moving sloped surfaces that have sector specials on them. //#define SECTORSPECIALSAFTERTHINK +/// FINALLY some real clipping that doesn't make walls dissappear AND speeds the game up +/// (that was the original comment from SRB2CB, sadly it is a lie and actually slows game down) +/// on the bright side it fixes some weird issues with translucent walls +/// \note SRB2CB port. +/// SRB2CB itself ported this from PrBoom+ +//#define NEWCLIP + #endif // __DOOMDEF__ diff --git a/src/hardware/hw_clip.c b/src/hardware/hw_clip.c index 47cbbfa2b..8b01cabd5 100644 --- a/src/hardware/hw_clip.c +++ b/src/hardware/hw_clip.c @@ -92,14 +92,14 @@ clipnode_t *freelist; clipnode_t *clipnodes; clipnode_t *cliphead; -static clipnode_t * HWR_clipnode_GetNew(void); -static clipnode_t * HWR_clipnode_NewRange(angle_t start, angle_t end); -static boolean HWR_clipper_IsRangeVisible(angle_t startAngle, angle_t endAngle); -static void HWR_clipper_AddClipRange(angle_t start, angle_t end); -static void HWR_clipper_RemoveRange(clipnode_t * range); -static void HWR_clipnode_Free(clipnode_t *node); +static clipnode_t * gld_clipnode_GetNew(void); +static clipnode_t * gld_clipnode_NewRange(angle_t start, angle_t end); +static boolean gld_clipper_IsRangeVisible(angle_t startAngle, angle_t endAngle); +static void gld_clipper_AddClipRange(angle_t start, angle_t end); +static void gld_clipper_RemoveRange(clipnode_t * range); +static void gld_clipnode_Free(clipnode_t *node); -static clipnode_t * HWR_clipnode_GetNew(void) +static clipnode_t * gld_clipnode_GetNew(void) { if (freelist) { @@ -113,26 +113,26 @@ static clipnode_t * HWR_clipnode_GetNew(void) } } -static clipnode_t * HWR_clipnode_NewRange(angle_t start, angle_t end) +static clipnode_t * gld_clipnode_NewRange(angle_t start, angle_t end) { - clipnode_t * c = HWR_clipnode_GetNew(); + clipnode_t * c = gld_clipnode_GetNew(); c->start = start; c->end = end; c->next = c->prev=NULL; return c; } -boolean HWR_clipper_SafeCheckRange(angle_t startAngle, angle_t endAngle) +boolean gld_clipper_SafeCheckRange(angle_t startAngle, angle_t endAngle) { if(startAngle > endAngle) { - return (HWR_clipper_IsRangeVisible(startAngle, ANGLE_MAX) || HWR_clipper_IsRangeVisible(0, endAngle)); + return (gld_clipper_IsRangeVisible(startAngle, ANGLE_MAX) || gld_clipper_IsRangeVisible(0, endAngle)); } - return HWR_clipper_IsRangeVisible(startAngle, endAngle); + return gld_clipper_IsRangeVisible(startAngle, endAngle); } -static boolean HWR_clipper_IsRangeVisible(angle_t startAngle, angle_t endAngle) +static boolean gld_clipper_IsRangeVisible(angle_t startAngle, angle_t endAngle) { clipnode_t *ci; ci = cliphead; @@ -152,13 +152,13 @@ static boolean HWR_clipper_IsRangeVisible(angle_t startAngle, angle_t endAngle) return true; } -static void HWR_clipnode_Free(clipnode_t *node) +static void gld_clipnode_Free(clipnode_t *node) { node->next = freelist; freelist = node; } -static void HWR_clipper_RemoveRange(clipnode_t *range) +static void gld_clipper_RemoveRange(clipnode_t *range) { if (range == cliphead) { @@ -176,25 +176,25 @@ static void HWR_clipper_RemoveRange(clipnode_t *range) } } - HWR_clipnode_Free(range); + gld_clipnode_Free(range); } -void HWR_clipper_SafeAddClipRange(angle_t startangle, angle_t endangle) +void gld_clipper_SafeAddClipRange(angle_t startangle, angle_t endangle) { if(startangle > endangle) { // The range has to added in two parts. - HWR_clipper_AddClipRange(startangle, ANGLE_MAX); - HWR_clipper_AddClipRange(0, endangle); + gld_clipper_AddClipRange(startangle, ANGLE_MAX); + gld_clipper_AddClipRange(0, endangle); } else { // Add the range as usual. - HWR_clipper_AddClipRange(startangle, endangle); + gld_clipper_AddClipRange(startangle, endangle); } } -static void HWR_clipper_AddClipRange(angle_t start, angle_t end) +static void gld_clipper_AddClipRange(angle_t start, angle_t end) { clipnode_t *node, *temp, *prevNode, *node2, *delnode; @@ -208,7 +208,7 @@ static void HWR_clipper_AddClipRange(angle_t start, angle_t end) { temp = node; node = node->next; - HWR_clipper_RemoveRange(temp); + gld_clipper_RemoveRange(temp); } else { @@ -250,7 +250,7 @@ static void HWR_clipper_AddClipRange(angle_t start, angle_t end) delnode = node2; node2 = node2->next; - HWR_clipper_RemoveRange(delnode); + gld_clipper_RemoveRange(delnode); } return; } @@ -260,7 +260,7 @@ static void HWR_clipper_AddClipRange(angle_t start, angle_t end) //just add range node = cliphead; prevNode = NULL; - temp = HWR_clipnode_NewRange(start, end); + temp = gld_clipnode_NewRange(start, end); while (node != NULL && node->start < end) { prevNode = node; @@ -296,13 +296,13 @@ static void HWR_clipper_AddClipRange(angle_t start, angle_t end) } else { - temp = HWR_clipnode_NewRange(start, end); + temp = gld_clipnode_NewRange(start, end); cliphead = temp; return; } } -void HWR_clipper_Clear(void) +void gld_clipper_Clear(void) { clipnode_t *node = cliphead; clipnode_t *temp; @@ -311,7 +311,7 @@ void HWR_clipper_Clear(void) { temp = node; node = node->next; - HWR_clipnode_Free(temp); + gld_clipnode_Free(temp); } cliphead = NULL; @@ -319,7 +319,7 @@ void HWR_clipper_Clear(void) #define RMUL (1.6f/1.333333f) -angle_t HWR_FrustumAngle(void) +angle_t gld_FrustumAngle(void) { double floatangle; angle_t a1; @@ -356,7 +356,7 @@ angle_t HWR_FrustumAngle(void) // btw to renable define HAVE_SPHEREFRUSTRUM in hw_clip.h #ifdef HAVE_SPHEREFRUSTRUM // -// HWR_FrustrumSetup +// gld_FrustrumSetup // #define CALCMATRIX(a, b, c, d, e, f, g, h)\ @@ -375,7 +375,7 @@ frustum[i][1] /= t; \ frustum[i][2] /= t; \ frustum[i][3] /= t -void HWR_FrustrumSetup(void) +void gld_FrustrumSetup(void) { float t; float clip[16]; @@ -446,7 +446,7 @@ void HWR_FrustrumSetup(void) NORMALIZE_PLANE(5); } -boolean HWR_SphereInFrustum(float x, float y, float z, float radius) +boolean gld_SphereInFrustum(float x, float y, float z, float radius) { int p; diff --git a/src/hardware/hw_clip.h b/src/hardware/hw_clip.h index c55041b7e..3ba26e5e5 100644 --- a/src/hardware/hw_clip.h +++ b/src/hardware/hw_clip.h @@ -12,13 +12,13 @@ #include "../tables.h" #include "../doomtype.h" -//#define HAVE_SPHEREFRUSTRUM // enable if you want HWR_SphereInFrustum and related code +//#define HAVE_SPHEREFRUSTRUM // enable if you want gld_SphereInFrustum and related code -boolean HWR_clipper_SafeCheckRange(angle_t startAngle, angle_t endAngle); -void HWR_clipper_SafeAddClipRange(angle_t startangle, angle_t endangle); -void HWR_clipper_Clear(void); -angle_t HWR_FrustumAngle(void); +boolean gld_clipper_SafeCheckRange(angle_t startAngle, angle_t endAngle); +void gld_clipper_SafeAddClipRange(angle_t startangle, angle_t endangle); +void gld_clipper_Clear(void); +angle_t gld_FrustumAngle(void); #ifdef HAVE_SPHEREFRUSTRUM -void HWR_FrustrumSetup(void); -boolean HWR_SphereInFrustum(float x, float y, float z, float radius); +void gld_FrustrumSetup(void); +boolean gld_SphereInFrustum(float x, float y, float z, float radius); #endif diff --git a/src/hardware/hw_main.c b/src/hardware/hw_main.c index 7e8152583..c10f4bf12 100644 --- a/src/hardware/hw_main.c +++ b/src/hardware/hw_main.c @@ -44,6 +44,10 @@ #endif #include "hw_md2.h" +#ifdef NEWCLIP +#include "hw_clip.h" +#endif + #define R_FAKEFLOORS #define HWPRECIP #define SORTING @@ -99,8 +103,9 @@ CV_PossibleValue_t granisotropicmode_cons_t[] = {{1, "MIN"}, {16, "MAX"}, {0, NU boolean drawsky = true; // needs fix: walls are incorrectly clipped one column less +#ifndef NEWCLIP static consvar_t cv_grclipwalls = {"gr_clipwalls", "Off", 0, CV_OnOff, NULL, 0, NULL, NULL, 0, 0, NULL}; - +#endif //development variables for diverse uses static consvar_t cv_gralpha = {"gr_alpha", "160", 0, CV_Unsigned, NULL, 0, NULL, NULL, 0, 0, NULL}; static consvar_t cv_grbeta = {"gr_beta", "0", 0, CV_Unsigned, NULL, 0, NULL, NULL, 0, 0, NULL}; @@ -1030,6 +1035,7 @@ static void HWR_ProjectWall(wallVert3D * wallVerts, // (in fact a clipping plane that has a constant, so can clip with simple 2d) // with the wall segment // +#ifndef NEWCLIP static float HWR_ClipViewSegment(INT32 x, polyvertex_t *v1, polyvertex_t *v2) { float num, den; @@ -1058,6 +1064,7 @@ static float HWR_ClipViewSegment(INT32 x, polyvertex_t *v1, polyvertex_t *v2) return num / den; } +#endif // // HWR_SplitWall @@ -1333,7 +1340,11 @@ static void HWR_DrawSkyWall(wallVert3D *wallVerts, FSurfaceInfo *Surf, fixed_t b // Anything between means the wall segment has been clipped with solidsegs, // reducing wall overdraw to a minimum // +#ifdef NEWCLIP +static void HWR_ProcessSeg(void) // Sort of like GLWall::Process in GZDoom +#else static void HWR_StoreWallRange(double startfrac, double endfrac) +#endif { wallVert3D wallVerts[4]; v2d_t vs, ve; // start, end vertices of 2d line (view from above) @@ -1358,8 +1369,10 @@ static void HWR_StoreWallRange(double startfrac, double endfrac) extracolormap_t *colormap; FSurfaceInfo Surf; +#ifndef NEWCLIP if (startfrac > endfrac) return; +#endif gr_sidedef = gr_curline->sidedef; gr_linedef = gr_curline->linedef; @@ -1408,15 +1421,19 @@ static void HWR_StoreWallRange(double startfrac, double endfrac) // x offset the texture fixed_t texturehpeg = gr_sidedef->textureoffset + gr_curline->offset; +#ifndef NEWCLIP // clip texture s start/end coords with solidsegs if (startfrac > 0.0f && startfrac < 1.0f) cliplow = (float)(texturehpeg + (gr_curline->flength*FRACUNIT) * startfrac); else +#endif cliplow = (float)texturehpeg; +#ifndef NEWCLIP if (endfrac > 0.0f && endfrac < 1.0f) cliphigh = (float)(texturehpeg + (gr_curline->flength*FRACUNIT) * endfrac); else +#endif cliphigh = (float)(texturehpeg + (gr_curline->flength*FRACUNIT)); } @@ -2325,6 +2342,135 @@ static void HWR_StoreWallRange(double startfrac, double endfrac) //Hurdler: end of 3d-floors test } +// From PrBoom: +// +// e6y: Check whether the player can look beyond this line +// +#ifdef NEWCLIP +// Don't modify anything here, just check +// Kalaron: Modified for sloped linedefs +static boolean CheckClip(seg_t * seg, sector_t * afrontsector, sector_t * abacksector) +{ + fixed_t frontf1,frontf2, frontc1, frontc2; // front floor/ceiling ends + fixed_t backf1, backf2, backc1, backc2; // back floor ceiling ends + + // GZDoom method of sloped line clipping + +#ifdef ESLOPE + if (afrontsector->f_slope || afrontsector->c_slope || abacksector->f_slope || abacksector->c_slope) + { + fixed_t v1x, v1y, v2x, v2y; // the seg's vertexes as fixed_t + v1x = FLOAT_TO_FIXED(((polyvertex_t *)gr_curline->pv1)->x); + v1y = FLOAT_TO_FIXED(((polyvertex_t *)gr_curline->pv1)->y); + v2x = FLOAT_TO_FIXED(((polyvertex_t *)gr_curline->pv2)->x); + v2y = FLOAT_TO_FIXED(((polyvertex_t *)gr_curline->pv2)->y); +#define SLOPEPARAMS(slope, end1, end2, normalheight) \ + if (slope) { \ + end1 = P_GetZAt(slope, v1x, v1y); \ + end2 = P_GetZAt(slope, v2x, v2y); \ + } else \ + end1 = end2 = normalheight; + + SLOPEPARAMS(afrontsector->f_slope, frontf1, frontf2, afrontsector->floorheight) + SLOPEPARAMS(afrontsector->c_slope, frontc1, frontc2, afrontsector->ceilingheight) + SLOPEPARAMS( abacksector->f_slope, backf1, backf2, abacksector->floorheight) + SLOPEPARAMS( abacksector->c_slope, backc1, backc2, abacksector->ceilingheight) +#undef SLOPEPARAMS + } + else +#endif + { + frontf1 = frontf2 = afrontsector->floorheight; + frontc1 = frontc2 = afrontsector->ceilingheight; + backf1 = backf2 = abacksector->floorheight; + backc1 = backc2 = abacksector->ceilingheight; + } + + // now check for closed sectors! + if (backc1 <= frontf1 && backc2 <= frontf2) + { + if (!seg->sidedef->toptexture) + return false; + + if (abacksector->ceilingpic == skyflatnum && afrontsector->ceilingpic == skyflatnum) + return false; + + return true; + } + + if (backf1 >= frontc1 && backf2 >= frontc2) + { + if (!seg->sidedef->bottomtexture) + return false; + + // properly render skies (consider door "open" if both floors are sky): + if (abacksector->ceilingpic == skyflatnum && afrontsector->ceilingpic == skyflatnum) + return false; + + return true; + } + + if (backc1 <= backf1 && backc2 <= backf2) + { + // preserve a kind of transparent door/lift special effect: + if (backc1 < frontc1 || backc2 < frontc2) + { + if (!seg->sidedef->toptexture) + return false; + } + if (backf1 > frontf1 || backf2 > frontf2) + { + if (!seg->sidedef->bottomtexture) + return false; + } + if (abacksector->ceilingpic == skyflatnum && afrontsector->ceilingpic == skyflatnum) + return false; + + if (abacksector->floorpic == skyflatnum && afrontsector->floorpic == skyflatnum) + return false; + + return true; + } + + + // Reject empty lines used for triggers and special events. + // Identical floor and ceiling on both sides, + // identical light levels on both sides, + // and no middle texture. + if ( +#ifdef POLYOBJECTS + !seg->polyseg && +#endif + gr_backsector->ceilingpic == gr_frontsector->ceilingpic + && gr_backsector->floorpic == gr_frontsector->floorpic +#ifdef ESLOPE + && gr_backsector->f_slope == gr_frontsector->f_slope + && gr_backsector->c_slope == gr_frontsector->c_slope +#endif + && gr_backsector->lightlevel == gr_frontsector->lightlevel + && !gr_curline->sidedef->midtexture + // Check offsets too! + && gr_backsector->floor_xoffs == gr_frontsector->floor_xoffs + && gr_backsector->floor_yoffs == gr_frontsector->floor_yoffs + && gr_backsector->floorpic_angle == gr_frontsector->floorpic_angle + && gr_backsector->ceiling_xoffs == gr_frontsector->ceiling_xoffs + && gr_backsector->ceiling_yoffs == gr_frontsector->ceiling_yoffs + && gr_backsector->ceilingpic_angle == gr_frontsector->ceilingpic_angle + // Consider altered lighting. + && gr_backsector->floorlightsec == gr_frontsector->floorlightsec + && gr_backsector->ceilinglightsec == gr_frontsector->ceilinglightsec + // Consider colormaps + && gr_backsector->extra_colormap == gr_frontsector->extra_colormap + && ((!gr_frontsector->ffloors && !gr_backsector->ffloors) + || gr_frontsector->tag == gr_backsector->tag)) + { + return false; + } + + + return false; +} +#else //Hurdler: just like in r_bsp.c #if 1 #define MAXSEGS MAXVIDWIDTH/2+1 @@ -2610,6 +2756,7 @@ static void HWR_ClearClipSegs(void) gr_solidsegs[1].last = 0x7fffffff; hw_newend = gr_solidsegs+2; } +#endif // NEWCLIP // -----------------+ // HWR_AddLine : Clips the given segment and adds any visible pieces to the line list. @@ -2618,17 +2765,20 @@ static void HWR_ClearClipSegs(void) // -----------------+ static void HWR_AddLine(seg_t * line) { - INT32 x1, x2; angle_t angle1, angle2; +#ifndef NEWCLIP + INT32 x1, x2; angle_t span, tspan; +#endif // SoM: Backsector needs to be run through R_FakeFlat static sector_t tempsec; fixed_t v1x, v1y, v2x, v2y; // the seg's vertexes as fixed_t - +#ifdef POLYOBJECTS if (line->polyseg && !(line->polyseg->flags & POF_RENDERSIDES)) return; +#endif gr_curline = line; @@ -2641,6 +2791,18 @@ static void HWR_AddLine(seg_t * line) angle1 = R_PointToAngle(v1x, v1y); angle2 = R_PointToAngle(v2x, v2y); +#ifdef NEWCLIP + // PrBoom: Back side, i.e. backface culling - read: endAngle >= startAngle! + if (angle2 - angle1 < ANGLE_180) + return; + + // PrBoom: use REAL clipping math YAYYYYYYY!!! + + if (!gld_clipper_SafeCheckRange(angle2, angle1)) + { + return; + } +#else // Clip to view edges. span = angle1 - angle2; @@ -2719,8 +2881,35 @@ static void HWR_AddLine(seg_t * line) return; } */ +#endif + gr_backsector = line->backsector; +#ifdef NEWCLIP + if (!line->backsector) + { + gld_clipper_SafeAddClipRange(angle2, angle1); + } + else + { + gr_backsector = R_FakeFlat(gr_backsector, &tempsec, NULL, NULL, true); + if (line->frontsector == line->backsector) + { + if (!line->sidedef->midtexture) + { + //e6y: nothing to do here! + //return; + } + } + if (CheckClip(line, gr_frontsector, gr_backsector)) + { + gld_clipper_SafeAddClipRange(angle2, angle1); + } + } + + HWR_ProcessSeg(); // Doesn't need arguments because they're defined globally :D + return; +#else // Single sided line? if (!gr_backsector) goto clipsolid; @@ -2835,6 +3024,7 @@ clipsolid: if (x1 == x2) goto clippass; HWR_ClipSolidWallSegment(x1, x2-1); +#endif } // HWR_CheckBBox @@ -2846,9 +3036,13 @@ clipsolid: static boolean HWR_CheckBBox(fixed_t *bspcoord) { - INT32 boxpos, sx1, sx2; + INT32 boxpos; fixed_t px1, py1, px2, py2; - angle_t angle1, angle2, span, tspan; + angle_t angle1, angle2; +#ifndef NEWCLIP + INT32 sx1, sx2; + angle_t span, tspan; +#endif // Find the corners of the box // that define the edges from current viewpoint. @@ -2874,6 +3068,11 @@ static boolean HWR_CheckBBox(fixed_t *bspcoord) px2 = bspcoord[checkcoord[boxpos][2]]; py2 = bspcoord[checkcoord[boxpos][3]]; +#ifdef NEWCLIP + angle1 = R_PointToAngle(px1, py1); + angle2 = R_PointToAngle(px2, py2); + return gld_clipper_SafeCheckRange(angle2, angle1); +#else // check clip list for an open space angle1 = R_PointToAngle2(dup_viewx>>1, dup_viewy>>1, px1>>1, py1>>1) - dup_viewangle; angle2 = R_PointToAngle2(dup_viewx>>1, dup_viewy>>1, px2>>1, py2>>1) - dup_viewangle; @@ -2921,6 +3120,7 @@ static boolean HWR_CheckBBox(fixed_t *bspcoord) return false; return HWR_ClipToSolidSegs(sx1, sx2 - 1); +#endif } #ifdef POLYOBJECTS @@ -5694,7 +5894,19 @@ if (0) #ifdef SORTING drawcount = 0; #endif +#ifdef NEWCLIP + if (rendermode == render_opengl) + { + angle_t a1 = gld_FrustumAngle(); + gld_clipper_Clear(); + gld_clipper_SafeAddClipRange(viewangle + a1, viewangle - a1); +#ifdef HAVE_SPHEREFRUSTRUM + gld_FrustrumSetup(); +#endif + } +#else HWR_ClearClipSegs(); +#endif //04/01/2000: Hurdler: added for T&L // Actually it only works on Walls and Planes @@ -5704,6 +5916,7 @@ if (0) HWR_RenderBSPNode((INT32)numnodes-1); +#ifndef NEWCLIP // Make a viewangle int so we can render things based on mouselook if (player == &players[consoleplayer]) viewangle = localaiming; @@ -5730,6 +5943,7 @@ if (0) dup_viewangle += ANGLE_90; } +#endif // Check for new console commands. NetUpdate(); @@ -5901,7 +6115,19 @@ if (0) #ifdef SORTING drawcount = 0; #endif +#ifdef NEWCLIP + if (rendermode == render_opengl) + { + angle_t a1 = gld_FrustumAngle(); + gld_clipper_Clear(); + gld_clipper_SafeAddClipRange(viewangle + a1, viewangle - a1); +#ifdef HAVE_SPHEREFRUSTRUM + gld_FrustrumSetup(); +#endif + } +#else HWR_ClearClipSegs(); +#endif //04/01/2000: Hurdler: added for T&L // Actually it only works on Walls and Planes @@ -5911,6 +6137,7 @@ if (0) HWR_RenderBSPNode((INT32)numnodes-1); +#ifndef NEWCLIP // Make a viewangle int so we can render things based on mouselook if (player == &players[consoleplayer]) viewangle = localaiming; @@ -5937,6 +6164,7 @@ if (0) dup_viewangle += ANGLE_90; } +#endif // Check for new console commands. NetUpdate(); @@ -6079,7 +6307,9 @@ static inline void HWR_AddEngineCommands(void) { // engine state variables //CV_RegisterVar(&cv_grzbuffer); +#ifndef NEWCLIP CV_RegisterVar(&cv_grclipwalls); +#endif // engine development mode variables // - usage may vary from version to version..