Yukita Mayako
3bc56a91b2
Hotfix for platform movement being dropped on players.
...
Now players will apply platform movement when jumping,
but only if the platform is moving the same direction
as their jump is, and all other objects will have an
appropriate pmomz in reverse gravity FOF situations.
2015-05-29 04:34:53 -04:00
RedEnchilada
e00d682185
Fix issue with objects getting stuck IN floors
2015-05-25 13:25:23 -05:00
RedEnchilada
5e18db79e9
Fix mobjs sometimes clipping through floors (whoops!)
2015-05-25 12:16:19 -05:00
RedEnchilada
d9d3752b4e
Unbreak FOF specials
2015-05-25 11:46:09 -05:00
RedEnchilada
32759312a1
Shut up the Kalaron
2015-05-24 18:22:56 -05:00
RedEnchilada
bddcf98355
Remap slope line specials to 7xx range: shim old values for now
2015-05-24 15:59:17 -05:00
RedEnchilada
a9d49cd9fa
Make all specials reliant on floor touch work right with sloeps
...
(I might've missed some, though)
2015-05-24 12:53:30 -05:00
RedEnchilada
a9dba0ffd1
Condense GetFloor/CeilingZ into fewer functions, and use macros for the rest
2015-05-24 11:27:52 -05:00
RedEnchilada
e0d97e4b1a
Slope planes should now not turn into static in 99% of cases
2015-05-23 16:27:15 -05:00
RedEnchilada
109d379980
Fix conveyor slopes eventually turning to static
2015-05-23 15:44:53 -05:00
RedEnchilada
b121bcca68
Remove P_GetZAtf (it didn't seem to work right anyway)
2015-05-23 12:23:24 -05:00
RedEnchilada
485f671f23
Sloped planes now respect flat offsets
2015-05-23 02:18:32 -05:00
RedEnchilada
a5d7356fd2
Sayonara, m_vector.c
2015-05-23 01:32:28 -05:00
RedEnchilada
3629a2141b
Slope planes work again. I hacked an alignment fix in too.
2015-05-23 01:19:38 -05:00
RedEnchilada
89319b1c2a
Dummy out m_vector and use m_fixed's functions instead
...
These functions were already here before, and I /swear/ the slope
physics became slightly less glitchy after switching to them...
Only issue is the slope plane mapping code hasn't been properly
converted yet, so they don't render properly for now.
2015-05-22 22:07:07 -05:00
RedEnchilada
3f8e7b1739
Revert/remove unused/broken junk from original slopes port
...
m_vector removal to come later. The little thing commented out in it
is so I could revert the weird tables.c change.
2015-05-22 20:57:58 -05:00
RedEnchilada
8c54ee44e7
Slopey physics for some things that aren't players
...
This is incredibly messy and probably needs redone differently at
some point, but... fuck it.
2015-05-22 12:33:12 -05:00
JTE
f783df718c
Reset tmthing after P_CheckSector calls from Lua
...
tmthing must not be set outside of P_MapStart and P_MapEnd
or the game will fail a sanity check which ensures that
mobj references are not persistent across frames and crash.
2015-05-22 01:51:40 -04:00
JTE
c91cd3860b
Revert "Wrapped Lua MapLoad hook in P_MapStart / P_MapEnd."
...
This reverts commit 6ee50e803b
2015-05-22 01:46:59 -04:00
RedEnchilada
fb9d07b8ba
Bugfixes to sloped FOF plane clipping
2015-05-21 22:13:51 -05:00
JTE
6ee50e803b
Wrapped Lua MapLoad hook in P_MapStart / P_MapEnd.
...
This fixes a crash if a script tries to use a MapLoad hook
to immediately edit the map in some way the moment it
finishes loading.
2015-05-21 19:55:22 -04:00
JTE
dfa8ac7ccb
Added sidedef texture and offset manipulation to Lua.
2015-05-21 19:05:17 -04:00
RedEnchilada
0d9f8028b7
Players now bounce off of slopes on bouncy FOFs
2015-05-21 15:49:49 -05:00
RedEnchilada
f23f5d4379
Fix flat slopes eating jumps
2015-05-21 15:49:26 -05:00
RedEnchilada
e24595ed52
Make the crumble check account for slopes for... some reason
2015-05-21 10:17:53 -05:00
RedEnchilada
3d2b71b24c
Make cameras properly collide with slopes
2015-05-21 09:36:20 -05:00
JTE
ef0e61fc33
Change LUA_NUMBER to fixed_t, change angle_t handling in Lua.
...
Angles now go from 0 to 0xFFFF (360 degrees == FRACUNIT) instead
of using a full UINT32. Lua only has one number type, so signedness
gets in the way of using angle_t directly. This handling of angles
matches up with how ZDoom ACS scripting and the like does it.
I also changed all the integer casts and pushes of fixed_t to
their own macro in preperation for possible future seperation.
2015-05-20 23:54:04 -04:00
RedEnchilada
7a3c5b3dd9
Scenery objects (notably, bubbles) now use slope when finding water surfaces
2015-05-20 19:21:44 -05:00
RedEnchilada
0e94cc66ff
2-in-1! Fixed slide movement AND climbing when around slopes
2015-05-20 19:08:49 -05:00
JTE
9d36cf37bd
Removed EvalMath from base Lua.
...
EvalMath is for SOC only.
It spawns an entirely seperate instance of Lua and requires
uppercase-only strings, and it's ability to parse strings to
enums is redundant to Lua's _G table (try using
_G["MT_BLUECRAWLA"] for instance)
2015-05-20 18:44:03 -04:00
JTE
1e62be15ce
ALL7EMERALDS is a boolean you idiot, not an integer.
2015-05-20 17:29:32 -04:00
RedEnchilada
7b0e98ef35
Change sliding physics and standing/rolling rules on slopes
2015-05-20 13:18:41 -05:00
RedEnchilada
1376f399d3
Sprite lighting obeys the slope overlords now
2015-05-18 00:23:44 -05:00
RedEnchilada
e7bc004bbf
Sloped lights n shit
2015-05-17 23:51:38 -05:00
RedEnchilada
e83844796e
Proper sorting fix for sloped FOFs and sprites
2015-05-17 21:49:13 -05:00
RedEnchilada
41573b118c
I'm a dumbass
2015-05-17 12:36:06 -05:00
RedEnchilada
0af3852273
Add translucent slope renderer
2015-05-17 12:24:20 -05:00
RedEnchilada
780c568aaf
Fix sprite-to-plane sorting on sloped FOFs
2015-05-17 12:03:52 -05:00
RedEnchilada
d138f7e14f
Collision with FOF slopes (might be unfinished, idk)
2015-05-17 11:53:28 -05:00
RedEnchilada
8ba5b66853
Slight optimization (don't get seg ends for slopes if there are no slopes)
2015-05-16 23:55:49 -05:00
RedEnchilada
c08253d796
FOF sides now render slopified too!
2015-05-16 23:04:54 -05:00
RedEnchilada
4e11d6d615
Make FOF planes render slopedly if set
2015-05-16 22:32:12 -05:00
RedEnchilada
d81cecdac9
Minor cleanup so it stops bugging me
2015-05-16 19:59:52 -05:00
RedEnchilada
09f8dec7d1
Optimization/configuration option: No Tails on a slope line makes a slope non-dynamic
2015-05-16 00:04:19 -05:00
RedEnchilada
6fcdac494f
Spawned things spawn relative to slope floor/ceiling heights now
...
This was a headache. :<
2015-05-16 00:02:01 -05:00
RedEnchilada
36d576adf4
I think those were being cast wrong
2015-05-15 12:36:16 -05:00
RedEnchilada
445e778309
Improvements to slope collision/landing/ejecting/fajitas
2015-05-15 12:35:54 -05:00
RedEnchilada
b69678f1a6
PLACEHOLDER, DO NOT PUSH THIS COMMIT
2015-05-15 10:23:53 -05:00
RedEnchilada
bd0b7829bb
Fix rotated flats on slopes
2015-05-14 10:55:43 -05:00
RedEnchilada
e39c8aa62e
Fix ceiling slopes lol
2015-05-13 21:57:47 -05:00
RedEnchilada
0cc917a0ff
Plane lighting for slopes now actually acts like it should
2015-05-13 21:41:54 -05:00
RedEnchilada
2187dac49b
Fix random texture triangles rendering on lines with slopes?????
2015-05-13 16:48:34 -05:00
RedEnchilada
a3358479f0
Improvements related to slope collision, and quantize momentum properly for landing
2015-05-13 16:15:32 -05:00
RedEnchilada
371e23d55d
Reduce acceleration pushback to less absurd levels
2015-05-13 16:02:19 -05:00
RedEnchilada
2183912100
Change upper/lower textures to not skew by default, add new linedef flags on normal linedefs:
...
Effect 1: Restore skewing on upper/lower textures
Effect 2: Disable skewing on midtextures
Effect 3: Flips effect of Lower Unpegged for midtextures only
(Effect 3 w/o LU: midtexture sticks to bottom, bottom texture sticks to
upper edge. Effect 3 w/ LU: midtexture sticks to top, bottom texture
sticks to lower edge.)
2015-05-04 17:45:02 -05:00
RedEnchilada
7e13cb8b47
Fix various issues/crashes with texture alignments
2015-05-04 16:40:02 -05:00
RedEnchilada
1b9180111c
Pin midtextures based on slopes, including bending on wall crossing
2015-05-04 15:15:57 -05:00
RedEnchilada
c66bb1c330
Make textures skew according to slope (midtextures not fixed yet)
2015-05-03 15:47:40 -05:00
RedEnchilada
79fedf91a0
Fix occasionally running into an invisible wall around slopes
2015-04-30 18:36:21 -05:00
RedEnchilada
3644d4d883
Minor code cleanup around renderer gunk
...
(Who let that silhouette == 1/etc thing sit there all those years? :V)
2015-04-30 00:41:29 -05:00
RedEnchilada
234f734fe5
Fix sprite clipping and some blocking walls being rendered around slopes
2015-04-30 00:38:51 -05:00
RedEnchilada
02d63aa011
Tweaks to slope physics + add accel rules for slopes
...
Your acceleration vector parallel to the slope is reduced based on slope
angle if it's going up the slope. The pull physics' momentum increase was
toned down a bit to go along with this. Also, I removed the ifdefs for
OLD_MOVEMENT_CODE because why should that be kept around?
2015-04-30 00:32:44 -05:00
RedEnchilada
fe8a2ae680
Fix compile error
2015-04-29 01:45:39 -05:00
chi.miru
c4306b624d
Optimized R_DrawTiltedSpan_8
2015-04-29 02:36:18 -04:00
RedEnchilada
ae935a0955
Stop rubbing my ass on the code long enough to fix reverse gravity
2015-04-29 00:36:24 -05:00
RedEnchilada
db883f6a23
Add a bunch of slope physics
...
I know giant commits all at once like this are a bad thing, but
too bad I worked without staging commits and now it's all here
at once :)
2015-04-29 00:35:54 -05:00
RedEnchilada
1f0f6b64c1
Store the slope an object is resting on (if applicable)
2015-04-29 00:33:04 -05:00
RedEnchilada
de81d01fbc
Fixes to slope generation (backfloor crash and wrong zdelta/zangle)
2015-04-29 00:30:39 -05:00
RedEnchilada
776b5254e6
Slope collision fixes
2015-04-29 00:29:51 -05:00
RedEnchilada
10ba850871
Fix dynamic slopes not working right in some cases
2015-04-27 14:07:04 -05:00
RedEnchilada
6694480f68
Overhaul slope collision (NOT PHYSICS) to work almost perfectly
2015-04-27 13:20:50 -05:00
RedEnchilada
58dd6d42af
Add P_GetFloorZ and P_GetCeilingZ as boilerplate to facilitate better slope collision
...
I have not used this anywhere in the code yet.
2015-04-27 13:18:12 -05:00
RedEnchilada
0c477c685d
Removing unused cruft
2015-04-26 22:20:03 -05:00
RedEnchilada
6fa1448f59
More cleanup, and made dynamic sloping more efficient/fixed memory leak
2015-04-26 21:50:50 -05:00
RedEnchilada
d0a726c00b
Teeny optimization in renderer code??
2015-04-26 13:06:45 -05:00
RedEnchilada
aeef23e816
MakeSlope_Line cleanup/fixed-point conversion
2015-04-26 13:06:23 -05:00
RedEnchilada
5070a964b9
Starting to clean up a bit of Kal's mess
...
I still don't know why Git reacts so strangely to the new files' line breaks...
2015-04-25 22:22:50 -05:00
RedEnchilada
bac34d783e
Fix crash with ceiling slopes and line collisions
2015-04-25 20:39:18 -05:00
RedEnchilada
f130a529b1
make stupid slopes render on stupid unix stupids
2015-04-21 10:01:51 -05:00
RedEnchilada
7703eae0e8
Actually fix slope generation (also whitespace stuff)
2015-04-20 13:25:39 -05:00
RedEnchilada
f4ea285f02
Fix vertical linedefs on slopes rendering improperly
2015-04-20 12:31:30 -05:00
RedEnchilada
12202d94a9
Fix calculation of slope extent, whoops
2015-04-20 12:18:56 -05:00
RedEnchilada
779faaa93f
SLOPES IN SOFTWARE MOD EHOLY SHIT
2015-04-20 02:10:14 -05:00
RedEnchilada
65719c5b99
Make wall renderer account for slopes properly (in most cases)
2015-04-19 22:20:54 -05:00
RedEnchilada
8d35c5064a
Fix slope generation
...
Physics seem to work at least partially, but no rendering yet (not even in OGL)
2015-04-19 16:54:20 -05:00
RedEnchilada
6e1f7e5f3a
Add slope files to CMakeLists
2015-04-19 16:21:19 -05:00
RedEnchilada
923fae476e
Merge branch 'fury-gh/slopes' into angles
...
Conflicts:
src/p_maputl.c
2015-04-19 15:56:55 -05:00
RedEnchilada
ddd66b9eff
Make A_SetObjectFlags only reset sector/bmap links if needed
2015-04-17 12:10:40 -05:00
Furyhunter
f7c463418e
Merge branch 'actual-blockmap-fix' into 'next'
...
Actual blockmap fix
MI's "fix" was a reversion of something that allowed 2.0 maps to use the entire blockmap. This MR reverts that fix and adds a proper fix to the issue of west/south edges of the blockmap not working as they should. Tested with a thokbarrier-less square map (all sides were solid) and with AGZ (objects are tangible all around the map, like they are in 2.1.14).
See merge request !10
2015-04-14 20:22:25 -04:00
Furyhunter
420c90fb48
Merge branch 'serverfix' into 'next'
...
Re-fix the server global variable in Lua
I screwed up the conditions on my first attempt to fix this, since I only tested one scenario. Tested this in SP, at the main menu, and both clientside and (dedicated)serverside in MP. Everything works as intended.
See merge request !9
2015-04-14 20:14:17 -04:00
Furyhunter
63089c885e
Merge branch 'polyobject-more-fixes' into 'next'
...
Polyobject more fixes
Extra fixes related to polyobjects; actually properly putting their flats alongside them in the draw list, and making them able to use single-waypoint zoom tube sequences. Also threw in a smoothness fix for swinging chains while I was there.
See merge request !8
2015-04-14 20:13:16 -04:00
Furyhunter
3d59e337ac
Merge branch 'polyobject-scroll-hotfix' into 'next'
...
Polyobject scroll hotfix
Things fixed:
* Polyobjects should now carry the same thing types as conveyors (notable example; they'll now carry Crawlas when they wouldn't before)
* The drifting issue with players on spinning polyobjects should be fixed. (I swapped in the old bad hack for a new hack that should work like it's supposed to)
See merge request !6
2015-04-14 20:10:07 -04:00
RedEnchilada
d2c74e1b13
Fix the west/south blockmap issue without fucking up huge maps
2015-04-08 21:32:07 -05:00
RedEnchilada
09345ce929
Revert "Guess what major breaking-news bug I just fixed B)"
...
This reverts commit 9e306394dd
2015-04-08 20:50:49 -05:00
Wolfy
55bfb4ffe8
Re-fix the server global variable in Lua
2015-04-08 13:46:30 -04:00
RedEnchilada
210279625a
Extra tiny logic fixes; swinging chains are smoother, and polyobjects can follow single-waypoint sequences
2015-04-06 11:23:08 -05:00
RedEnchilada
1078be3c30
Insert polyobject planes into their proper spot in the draw list; replace related hack with other hacks
2015-04-06 11:22:27 -05:00
JTE
4f06650a1e
Removed the small velocity boost you get for surfacing from goo.
...
This will prevent the goo from maintaining momentum for too long,
and shorten the amount of time before you stabilize on the surface.
2015-04-04 18:39:32 -04:00
JTE
4016d15f7b
Adjusted platform-creating velocity of goo water.
...
Now it will only bounce ONCE when you jump on it, and Knuckles
just barely gets enough velocity out of his jump for even that.
This will leave players vulnerable and annoyed for a lot less
time while they wait to finish bouncing.
2015-04-04 18:38:20 -04:00
RedEnchilada
5a4d9f885b
Making RotateThings a bit nicer??
2015-04-01 20:41:53 -05:00
