Co-Authored-By: Sally Coolatta <tehrealsalt@gmail.com>
Co-Authored-By: James R <justsomejames2@gmail.com>
Co-Authored-By: Monster Iestyn <iestynjealous@ntlworld.com>
Co-Authored-By: katsy <katmint@live.com>
Place Frame Interpolation in "Experimental" video options header
This seems like an appropriate way to describe the feature for now.
Add smooth level platter under interpolation, `renderdeltatics`
`renderdeltatics` can be used as a standard delta time in any place,
allowing for smooth menus. It will always be equal to `realtics`
when frame interpolation is turned off, producing consistent
framerate behavior everywhere it is used.
Add smooth rendering to save select screen
Add smooth rendering to Record/NiGHTS Attack, F_SkyScroll
Ensure viewsector is accurate to viewx/viewy
This fixes a potential crash in OpenGL when changing between levels.
Ensure + commands get executed before map start
Always have precise_t defined
Fix misc dropshadow issues
Reset view interpolation on level load
Remove unnecessary precipmobj thinker hack
Add reset interpolation state functions
Reset precip interpolation on snap to ceil
Reset mobj interp state on TeleportMove
Only swap view interp state if a tick is run
Run anti-lag chasecam at tic frequency
Fixes jittery and unstable chasecam in high latency netgames
Homogenize mobj interpolations
Add sector plane level interpolations
Add SectorScroll interpolator
Add SideScroll interpolator
Add Polyobj interpolator
Intialize interpolator list at a better time
Delete interpolators associated with thinkers
Interpolate mobj angles and player drawangle
Interpolate HWR_DrawModel
Add functions to handle interpolation
Much less code duplication
P_InitAngle, to fix angle interpolation on spawning objects
Fully fix drop shadows
It used the thing's floorz / ceilingz directly -- that wouldn't account for interpolated coordinates.
Do not speed up underwater/heatwave effect in OpenGL
Closer OpenGL underwater/heatwave effect to Software
Interpolate from time of previous tic
Previously interpolated from last 35th of a second, which
may be offset from game time due to connection lag.
Consider this the proper fix to 54148a0dd0 too.
Calculate FPS stuff even if frame is skipped
I decided ultimately to actually keep the frame skip optimization disabled, because I think it is actually a little bit helpful that you can still get accurate rendering perfstats while paused, however if we decide otherwise then we can have this optimization back without making the game act like it's lagging.
Keep rect in memory
Feel better about this than creating one all da time
Lots of FPS stuff
- Disabled VSync, due to the numerous problems it has.
- Instead, added an FPS cap.
- Frame interpolation is now tied to fpscap != 35.
- By default, the FPS cap is set to the monitor's refresh rate.
- Rewrote the FPS counter.
(This also consolidates several more commits ahead of this
fixing various issues. -eid)
Misc changes after Kart cherry-picks
Fix renderdeltatics with new timing data
Update mobj oldstates before all thinkers
Allow FPS cap values
Adjust how FPS cap is checked to improve FPS stability
Fix precip crash from missing vars
Improve the framerate limiter's timing for extreme stable FPS
Handle the sleep at the end of D_SRB2Loop instead of the start
Simplifies logic in the other parts of the loop, and fixes problems with it frequently waiting too long.
Reset mobj interp state on add
Add mobj interpolator on load netgame
Move mobj interpolators to r_fps
Dynamic slope interpolators
I_GetFrameTime to try and improve frame pace
(It doesn't feel that much better though.)
Move I_FinishUpdate to D_SRB2Loop to sync screen updates with FPS cap, use timestamps in I_FrameCapSleep to simplify the code
Fix plane interpolation light level flickering
Fix flickering plane interpolation for OpenGL in the exact same way
Funny OpenGL renderer being at least 50% copy-pasted Software code :)
P_SetOrigin & P_MoveOrigin to replace P_TeleportMove
Convert P_TeleportMove use to origin funcs
Revert "P_InitAngle, to fix angle interpolation on spawning objects"
This reverts commit a80c98bd164a2748cbbfad9027b34601185d93f5.
Waypoint polyobjects interpolate z & children
Add interpolation to more moving plane types
Adds interpolation to the following:
- Crumbling platforms
- Mario blocks
- Floatbob platforms (this one works really strangely due to two thinkers, maybe double-check this one?)
Reset overlays interp states each TryRunTics
Interpolate model interpolation (lol)
Use interp tracer pos for GL linkdraw
Papersprite angle interpolation
Makes the ending signpost smooth
Move intermission emerald bounce to ticker
Bring back shadows on polyobjects
Also optimizes the method used so rings can show their shadows too. Using just the subsector is a tad bit imprecise admittedly but any more precise methods get really laggy.
Fix a bunch of ticking in hu_ drawing functions
Revert "Reset overlays interp states each TryRunTics"
This reverts commit a71a216faa20e8751b3bd0157354e8d748940c92.
Move intro ticking out of the drawer
Adjust 1up monitor icon z offsets
Fixes interpolation issues with 1up monitors.
Delta time choose player menu animations
Add drawerlib deltaTime function
Interpolate afterimages further back
Use old sleep in dedicated mode
Clamp cechotimer to 0
Fixes issues with cechos staying on-screen and glitching out
(NiGHTS items for example).
Revert "Remove unnecessary precipmobj thinker hack"
This reverts commit 0e38208620d19ec2ab690740438ac2fc7862a49e.
Fix frame pacing when game lags behind
The frame timestamp should've been made at the start of the frame, not the end.
Fix I_FrameCapSleep not respecting cpusleep
Jonathan Joestar bruh
Allow dedicated to use precise sleep timing again
Instead of only using one old sleep, just enforce framerate cap to match TICRATE.
Make Lua TeleportMove call MoveOrigin
Reset Metal fume interp state on appear
Add interpdebug
Put interpdebug stuff in perfstats instead
Add timescale cvar
Slow the game down to debug animations / interpolation problems! Speed it up if you need to get somewhere quickly while mapping!
Enable timescale outside of DEVELOP builds
It has NETVAR, so it should be fine -- put an end to useful debugging features excluded in multiplayer!
Force interpolation when timescale != 1.0
Reset old_z in MT_LOCKON think
Fixes interpolation artifacting due to spawn pos.
Fix cutscenes in interp
Fix boss1 laser in interp
Interpolate mobj scale
Precalculate refresh rate
Slower PCs can have issue querying mode over and over. This might kinda suck for windowed mode if you have different refresh rate displays but oh well
Fix interp scaling crashing software
Reset interp scale when Lua sets .scale
Disable angle interp on fresh mobjs
Fix interp scale crash for hires sprites
Interp shadow scales
Copy interp state in P_SpawnMobjFromMobj
Fix multiplayer character select
Don't interpolate mobj state if frac = 1.0
Fix Mario block item placement
Interpolate spritescale/offset x/y
Fix offset copies for SpawnMobjFromMobj
THANKS SAL
Add Lua HUD drawlists
Buffers draw calls between tics to ensure hooks
run at the originally intended rate.
Rename drawerlib deltaTime to getDeltaTime
Make renderisnewtic is false between tics
I know what I'm doing! I swear
Completely refactor timing system
Time is now tracked internally in the game using I_GetPreciseTime
and I_UpdateTime. I_Time now pulls from this internal timer. The
system code no longer needs to keep track of time itself.
This significantly improves frame and tic timing in interp mode,
resulting in a much smoother image with essentially no judder at
any framerate.
Ensure mobj interpolators reset on level load
Ensure view is not interpolated on first frame
Disable sprite offset interpolation (for now)
Refactor timing code even more
System layer is greatly simplified and framecap
logic has been moved internally. I_Sleep now
takes a sleep duration and I_SleepDuration
generically implements a precise sleep with spin
loop.
* Objects!
* Gone is the arcane, difficult-to-remember list of random flags. Say hello to MF_DONTENCOREMAP!
* Alternatively, if the object has a skincolour applied to it, it isn't encoremapped either. (Useful for ghosts, for example.)
* Sectors!
* The autodetecting of sneaker and spring panels is now much more intelligent, and only avoids remapping the plane(s) the effect is availible upon.
* Sector special group 2 no. 15 is now "Invert Encore Remap". It inverts the above detection.
* Linedefs!
* The "Transfer Line" linedef flag can now also be used to deny Encore remappings on linedef textures.
* Right now it applies to every pixel drawn specifically belonging to that linedef, but if people decide it needs changing, we CAN make it apply to midtextures only (like linedef types 900-910).
* Remove FUNCMATH from all void-returning functions, given GCC80 specifically complains about this case.
* Extend the length of all extant buffers to the safety threshold recommended by the compiler.
* Add void casts to WS_getaddrinfo's setting to prevent complaints about incompatible typecasts.
* Extend the charsel, face, and superface buffer sizes and writes to include the null terminator. (I didn't really want to do this because it's not even particularily NEEDED, but there was literally zero way to get around the request that I could find with multiple online searches. I tried.)
Here's how it works: When a player walks off the
moving platform, it applies their pmomz once, and
then _keeps pmomz set_ so that the camera still
adds pmomz to its movements until they hit another
floor. This way, the camera doesn't jerk around.
