// qcommon.h -- definitions common between client and server, but not game.or ref modules #ifndef __QCOMMON_H__ #define __QCOMMON_H__ #include "stripPublic.h" #include "../qcommon/cm_public.h" // some zone mem debugging stuff #ifndef FINAL_BUILD #ifdef _DEBUG // // both of these should be REM'd unless you specifically need them... // //#define DEBUG_ZONE_ALLOCS // adds __FILE__ and __LINE__ info to zone blocks, to see who's leaking //#define DETAILED_ZONE_DEBUG_CODE // this slows things down a LOT, and is only for tracking nasty double-freeing Z_Malloc bugs #endif #endif //============================================================================ // // msg.c // typedef struct { qboolean allowoverflow; // if false, do a Com_Error qboolean overflowed; // set to true if the buffer size failed (with allowoverflow set) byte *data; int maxsize; int cursize; int readcount; int bit; // for bitwise reads and writes } msg_t; void MSG_Init (msg_t *buf, byte *data, int length); void MSG_Clear (msg_t *buf); void *MSG_GetSpace (msg_t *buf, int length); void MSG_WriteData (msg_t *buf, const void *data, int length); struct usercmd_s; struct entityState_s; struct playerState_s; void MSG_WriteBits( msg_t *msg, int value, int bits ); void MSG_WriteByte (msg_t *sb, int c); void MSG_WriteShort (msg_t *sb, int c); void MSG_WriteLong (msg_t *sb, int c); void MSG_WriteString (msg_t *sb, const char *s); void MSG_BeginReading (msg_t *sb); int MSG_ReadBits( msg_t *msg, int bits ); int MSG_ReadByte (msg_t *sb); int MSG_ReadShort (msg_t *sb); int MSG_ReadLong (msg_t *sb); char *MSG_ReadString (msg_t *sb); char *MSG_ReadStringLine (msg_t *sb); void MSG_ReadData (msg_t *sb, void *buffer, int size); void MSG_WriteDeltaUsercmd( msg_t *msg, struct usercmd_s *from, struct usercmd_s *to ); void MSG_ReadDeltaUsercmd( msg_t *msg, struct usercmd_s *from, struct usercmd_s *to ); void MSG_WriteDeltaEntity( msg_t *msg, struct entityState_s *from, struct entityState_s *to , qboolean force ); void MSG_ReadDeltaEntity( msg_t *msg, entityState_t *from, entityState_t *to, int number ); void MSG_WriteDeltaPlayerstate( msg_t *msg, struct playerState_s *from, struct playerState_s *to ); void MSG_ReadDeltaPlayerstate( msg_t *msg, struct playerState_s *from, struct playerState_s *to ); //============================================================================ #ifdef _M_IX86 // // optimised stuff for Intel, since most of our data is in that format anyway... // extern short BigShort (short l); extern int BigLong (int l); extern float BigFloat (float l); #define LittleShort(l) l #define LittleLong(l) l #define LittleFloat(l) l // #else // // standard smart-swap code... // extern short BigShort (short l); extern short LittleShort (short l); extern int BigLong (int l); extern int LittleLong (int l); extern float BigFloat (float l); extern float LittleFloat (float l); // #endif /* ============================================================== NET ============================================================== */ #define PACKET_BACKUP 16 // number of old messages that must be kept on client and // server for delta comrpession and ping estimation #define PACKET_MASK (PACKET_BACKUP-1) #define MAX_PACKET_USERCMDS 32 // max number of usercmd_t in a packet #define PORT_ANY -1 #define MAX_RELIABLE_COMMANDS 64 // max string commands buffered for restransmit typedef enum { NA_BAD, // an address lookup failed NA_LOOPBACK, } netadrtype_t; typedef enum { NS_CLIENT, NS_SERVER } netsrc_t; typedef struct { netadrtype_t type; unsigned short port; } netadr_t; void NET_SendPacket (netsrc_t sock, int length, const void *data, netadr_t to); void NET_OutOfBandPrint( netsrc_t net_socket, netadr_t adr, const char *format, ...); qboolean NET_CompareAdr (netadr_t a, netadr_t b); qboolean NET_CompareBaseAdr (netadr_t a, netadr_t b); qboolean NET_IsLocalAddress (netadr_t adr); qboolean NET_IsLANAddress (netadr_t adr); const char *NET_AdrToString (netadr_t a); qboolean NET_StringToAdr ( const char *s, netadr_t *a); qboolean NET_GetLoopPacket (netsrc_t sock, netadr_t *net_from, msg_t *net_message); #define MAX_MSGLEN (3*16384) // max length of a message, which may // be fragmented into multiple packets /* Netchan handles packet fragmentation and out of order / duplicate suppression */ typedef struct { netsrc_t sock; int dropped; // between last packet and previous netadr_t remoteAddress; int qport; // qport value to write when transmitting // sequencing variables int incomingSequence; int incomingAcknowledged; int outgoingSequence; // incoming fragment assembly buffer int fragmentSequence; int fragmentLength; byte fragmentBuffer[MAX_MSGLEN]; } netchan_t; void Netchan_Init( int qport ); void Netchan_Setup( netsrc_t sock, netchan_t *chan, netadr_t adr, int qport ); void Netchan_Transmit( netchan_t *chan, int length, const byte *data ); qboolean Netchan_Process( netchan_t *chan, msg_t *msg ); /* ============================================================== PROTOCOL ============================================================== */ #define PROTOCOL_VERSION 40 #define PORT_SERVER 27960 // the svc_strings[] array in cl_parse.c should mirror this // // server to client // enum svc_ops_e { svc_bad, svc_nop, svc_gamestate, svc_configstring, // [short] [string] only in gamestate messages svc_baseline, // only in gamestate messages svc_serverCommand, // [string] to be executed by client game module svc_download, // [short] size [size bytes] svc_snapshot }; // // client to server // enum clc_ops_e { clc_bad, clc_nop, clc_move, // [[usercmd_t] clc_clientCommand // [string] message }; /* ============================================================== CMD Command text buffering and command execution ============================================================== */ /* Any number of commands can be added in a frame, from several different sources. Most commands come from either keybindings or console line input, but entire text files can be execed. */ void Cbuf_Init (void); // allocates an initial text buffer that will grow as needed void Cbuf_AddText( const char *text ); // Adds command text at the end of the buffer, does NOT add a final \n void Cbuf_ExecuteText( int exec_when, const char *text ); // this can be used in place of either Cbuf_AddText or Cbuf_InsertText void Cbuf_Execute (void); // Pulls off \n terminated lines of text from the command buffer and sends // them through Cmd_ExecuteString. Stops when the buffer is empty. // Normally called once per frame, but may be explicitly invoked. // Do not call inside a command function, or current args will be destroyed. //=========================================================================== /* Command execution takes a null terminated string, breaks it into tokens, then searches for a command or variable that matches the first token. */ typedef void (*xcommand_t) (void); void Cmd_Init (void); void Cmd_AddCommand( const char *cmd_name, xcommand_t function ); // called by the init functions of other parts of the program to // register commands and functions to call for them. // The cmd_name is referenced later, so it should not be in temp memory // if function is NULL, the command will be forwarded to the server // as a clc_clientCommand instead of executed locally void Cmd_RemoveCommand( const char *cmd_name ); char *Cmd_CompleteCommand( const char *partial ); // attempts to match a partial command for automatic command line completion // returns NULL if nothing fits int Cmd_Argc (void); char *Cmd_Argv (int arg); void Cmd_ArgvBuffer( int arg, char *buffer, int bufferLength ); char *Cmd_Args (void); void Cmd_ArgsBuffer( char *buffer, int bufferLength ); // The functions that execute commands get their parameters with these // functions. Cmd_Argv () will return an empty string, not a NULL // if arg > argc, so string operations are allways safe. void Cmd_TokenizeString( const char *text ); // Takes a null terminated string. Does not need to be /n terminated. // breaks the string up into arg tokens. void Cmd_ExecuteString( const char *text ); // Parses a single line of text into arguments and tries to execute it // as if it was typed at the console /* ============================================================== CVAR ============================================================== */ /* cvar_t variables are used to hold scalar or string variables that can be changed or displayed at the console or prog code as well as accessed directly in C code. The user can access cvars from the console in three ways: r_draworder prints the current value r_draworder 0 sets the current value to 0 set r_draworder 0 as above, but creates the cvar if not present Cvars are restricted from having the same names as commands to keep this interface from being ambiguous. The are also occasionally used to communicated information between different modules of the program. */ cvar_t *Cvar_Get( const char *var_name, const char *value, int flags ); // creates the variable if it doesn't exist, or returns the existing one // if it exists, the value will not be changed, but flags will be ORed in // that allows variables to be unarchived without needing bitflags // if value is "", the value will not override a previously set value. void Cvar_Register( vmCvar_t *vmCvar, const char *varName, const char *defaultValue, int flags ); // basically a slightly modified Cvar_Get for the interpreted modules void Cvar_Update( vmCvar_t *vmCvar ); // updates an interpreted modules' version of a cvar void Cvar_Set( const char *var_name, const char *value ); // will create the variable with no flags if it doesn't exist void Cvar_SetValue( const char *var_name, float value ); // expands value to a string and calls Cvar_Set float Cvar_VariableValue( const char *var_name ); int Cvar_VariableIntegerValue( const char *var_name ); // returns 0 if not defined or non numeric char *Cvar_VariableString( const char *var_name ); void Cvar_VariableStringBuffer( const char *var_name, char *buffer, int bufsize ); // returns an empty string if not defined char *Cvar_CompleteVariable( const char *partial ); // attempts to match a partial variable name for command line completion // returns NULL if nothing fits void Cvar_Reset( const char *var_name ); void Cvar_SetCheatState( void ); // reset all testing vars to a safe value qboolean Cvar_Command( void ); // called by Cmd_ExecuteString when Cmd_Argv(0) doesn't match a known // command. Returns true if the command was a variable reference that // was handled. (print or change) void Cvar_WriteVariables( fileHandle_t f ); // writes lines containing "set variable value" for all variables // with the archive flag set to true. void Cvar_Init( void ); char *Cvar_InfoString( int bit ); // returns an info string containing all the cvars that have the given bit set // in their flags ( CVAR_USERINFO, CVAR_SERVERINFO, CVAR_SYSTEMINFO, etc ) void Cvar_InfoStringBuffer( int bit, char *buff, int buffsize ); void Cvar_Restart_f( void ); extern int cvar_modifiedFlags; // whenever a cvar is modifed, its flags will be OR'd into this, so // a single check can determine if any CVAR_USERINFO, CVAR_SERVERINFO, // etc, variables have been modified since the last check. The bit // can then be cleared to allow another change detection. /* ============================================================== FILESYSTEM No stdio calls should be used by any part of the game, because we need to deal with all sorts of directory and seperator char issues. ============================================================== */ qboolean FS_Initialized(); void FS_InitFilesystem (void); char **FS_ListFiles( const char *directory, const char *extension, int *numfiles ); // directory should not have either a leading or trailing / // if extension is "/", only subdirectories will be returned // the returned files will not include any directories or / void FS_FreeFileList( char **list ); int FS_GetFileList( const char *path, const char *extension, char *listbuf, int bufsize ); fileHandle_t FS_FOpenFileWrite( const char *qpath ); // will properly create any needed paths and deal with seperater character issues fileHandle_t FS_FOpenFileAppend( const char *filename ); // this was present already, but no public proto qboolean FS_GetExtendedInfo_FOpenFileRead(const char *filename, char **ppsFilename, int *piOffset); //return value is success of opening file, then ppsFilename and piOffset are valid int FS_FOpenFileRead( const char *qpath, fileHandle_t *file, qboolean uniqueFILE ); // if uniqueFILE is true, then a new FILE will be fopened even if the file // is found in an already open pak file. If uniqueFILE is false, you must call // FS_FCloseFile instead of fclose, otherwise the pak FILE would be improperly closed // It is generally safe to always set uniqueFILE to true, because the majority of // file IO goes through FS_ReadFile, which Does The Right Thing already. int FS_FileIsInPAK(const char *filename ); // returns 1 if a file is in the PAK file, otherwise -1 int FS_Write( const void *buffer, int len, fileHandle_t f ); int FS_Read( void *buffer, int len, fileHandle_t f ); // properly handles partial reads and reads from other dlls void FS_FCloseFile( fileHandle_t f ); // note: you can't just fclose from another DLL, due to MS libc issues int FS_ReadFile( const char *qpath, void **buffer ); // returns the length of the file // a null buffer will just return the file length without loading // as a quick check for existance. -1 length == not present // A 0 byte will always be appended at the end, so string ops are safe. // the buffer should be considered read-only, because it may be cached // for other uses. void FS_ForceFlush( fileHandle_t f ); // forces flush on files we're writing to. void FS_FreeFile( void *buffer ); // frees the memory returned by FS_ReadFile void FS_WriteFile( const char *qpath, const void *buffer, int size ); // writes a complete file, creating any subdirectories needed int FS_filelength( fileHandle_t f ); // doesn't work for files that are opened from a pack file int FS_FTell( fileHandle_t f ); // where are we? void FS_Flush( fileHandle_t f ); void QDECL FS_Printf( fileHandle_t f, const char *fmt, ... ); // like fprintf int FS_FOpenFileByMode( const char *qpath, fileHandle_t *f, fsMode_t mode ); // opens a file for reading, writing, or appending depending on the value of mode int FS_Seek( fileHandle_t f, long offset, int origin ); // seek on a file (doesn't work for zip files!!!!!!!!) // These 2 are generally only used by the save games, filenames are local (eg "saves/blah.sav") // void FS_DeleteUserGenFile( const char *filename ); qboolean FS_CopyUserGenFile ( const char *filename_src, const char *filename_dst ); /* ============================================================== MISC ============================================================== */ //========================================================== // // NOTE NOTE NOTE!!!!!!!!!!!!! // // Any CPUID_XXXX defined as higher than CPUID_INTEL_MMX *must* have MMX support (eg like CPUID_AMD_3DNOW (0x30) has), // this allows convenient MMX capability checking. If you for some reason want to support some new processor that does // *NOT* have MMX (yeah, right), then define it as a lower number. -slc // // ( These values are returned by Sys_GetProcessorId ) // #define CPUID_GENERIC 0 // any unrecognized processor #define CPUID_AXP 0x10 #define CPUID_INTEL_UNSUPPORTED 0x20 // Intel 386/486 #define CPUID_INTEL_PENTIUM 0x21 // Intel Pentium or PPro #define CPUID_INTEL_MMX 0x22 // Intel Pentium/MMX or P2/MMX #define CPUID_INTEL_KATMAI 0x23 // Intel Katmai #define CPUID_INTEL_WILLIAMETTE 0x24 // Intel Williamette #define CPUID_AMD_3DNOW 0x30 // AMD K6 3DNOW! // //========================================================== char *CopyString( const char *in ); void Info_Print( const char *s ); void Com_BeginRedirect (char *buffer, int buffersize, void (*flush)(char *)); void Com_EndRedirect( void ); void QDECL Com_Printf( const char *fmt, ... ); void QDECL Com_DPrintf( const char *fmt, ... ); void QDECL Com_Error( int code, const char *fmt, ... ); void Com_Quit_f( void ); int Com_EventLoop( void ); int Com_Milliseconds( void ); // will be journaled properly unsigned Com_BlockChecksum( const void *buffer, int length ); int Com_Filter(char *filter, char *name, int casesensitive); void Com_StartupVariable( const char *match ); // checks for and removes command line "+set var arg" constructs // if match is NULL, all set commands will be executed, otherwise // only a set with the exact name. Only used during startup. extern cvar_t *com_developer; extern cvar_t *com_speeds; extern cvar_t *com_timescale; extern cvar_t *com_sv_running; extern cvar_t *com_cl_running; extern cvar_t *com_viewlog; // 0 = hidden, 1 = visible, 2 = minimized extern cvar_t *com_version; extern cvar_t *com_journal; // both client and server must agree to pause extern cvar_t *cl_paused; extern cvar_t *sv_paused; // com_speeds times extern int time_game; extern int time_frontend; extern int time_backend; // renderer backend time extern int timeInTrace; extern int timeInPVSCheck; extern int numTraces; extern int com_frameTime; extern int com_frameMsec; extern qboolean com_errorEntered; extern fileHandle_t com_journalFile; extern fileHandle_t com_journalDataFile; /* --- low memory ---- server vm server clipmap ---mark--- renderer initialization (shaders, etc) UI vm cgame vm renderer map renderer models ---free--- temp file loading --- high memory --- */ void Z_Validate( void ); int Z_MemSize ( memtag_t eTag ); void Z_TagFree ( memtag_t eTag ); void Z_Free ( void *ptr ); int Z_Size ( void *pvAddress); #ifdef DEBUG_ZONE_ALLOCS void *_D_Z_Malloc ( int iSize, memtag_t eTag, qboolean bZeroit, const char *psFile, int iLine ); void *_D_S_Malloc ( int iSize, const char *psFile, int iLine ); void _D_Z_Label ( const void *pvAddress, const char *pslabel ); #define Z_Malloc(_iSize, _eTag, _bZeroit) _D_Z_Malloc (_iSize, _eTag, _bZeroit, __FILE__, __LINE__) #define S_Malloc(_iSize) _D_S_Malloc (_iSize, __FILE__, __LINE__) // NOT 0 filled memory only for small allocations #define Z_Label(_ptr, _label) _D_Z_Label (_ptr, _label) #else void *Z_Malloc ( int iSize, memtag_t eTag, qboolean bZeroit); // return memory NOT zero-filled by default void *S_Malloc ( int iSize ); // NOT 0 filled memory only for small allocations #define Z_Label(_ptr, _label) /* */ #endif void Hunk_Clear( void ); void Hunk_ClearToMark( void ); void Hunk_SetMark( void ); // note the opposite default for 'bZeroIt' in Hunk_Alloc to Z_Malloc, since Hunk_Alloc always used to memset(0)... // inline void *Hunk_Alloc( int size, qboolean bZeroIt = qtrue) { return Z_Malloc(size, TAG_HUNKALLOC, bZeroIt); } void Com_TouchMemory( void ); // commandLine should not include the executable name (argv[0]) void Com_SetOrgAngles(vec3_t org,vec3_t angles); void Com_Init( char *commandLine ); void Com_Frame( void ); void Com_Shutdown( void ); void Com_ShutdownZoneMemory(void); void Com_ShutdownHunkMemory(void); /* ============================================================== CLIENT / SERVER SYSTEMS ============================================================== */ // // client interface // void CL_InitKeyCommands( void ); // the keyboard binding interface must be setup before execing // config files, but the rest of client startup will happen later void CL_Init( void ); void CL_Disconnect( void ); void CL_Shutdown( void ); void CL_Frame( int msec,float fractionMsec ); qboolean CL_GameCommand( void ); void CL_KeyEvent (int key, qboolean down, unsigned time); void CL_CharEvent( int key ); // char events are for field typing, not game control void CL_MouseEvent( int dx, int dy, int time ); void CL_JoystickEvent( int axis, int value, int time ); void CL_PacketEvent( netadr_t from, msg_t *msg ); void CL_ConsolePrint( char *text ); void CL_MapLoading( void ); // do a screen update before starting to load a map // when the server is going to load a new map, the entire hunk // will be cleared, so the client must shutdown cgame, ui, and // the renderer void CL_ForwardCommandToServer( void ); // adds the current command line as a clc_clientCommand to the client message. // things like godmode, noclip, etc, are commands directed to the server, // so when they are typed in at the console, they will need to be forwarded. void CL_FlushMemory( void ); // dump all memory on an error void CL_StartHunkUsers( void ); void Key_WriteBindings( fileHandle_t f ); // for writing the config files void S_ClearSoundBuffer( void ); // call before filesystem access void SCR_DebugGraph (float value, int color); // FIXME: move logging to common? // // server interface // void SV_Init( void ); void SV_Shutdown( char *finalmsg ); void SV_Frame( int msec,float fractionMsec); void SV_PacketEvent( netadr_t from, msg_t *msg ); qboolean SV_GameCommand( void ); // // UI interface // qboolean UI_GameCommand( void ); /* ============================================================== NON-PORTABLE SYSTEM SERVICES ============================================================== */ typedef enum { AXIS_SIDE, AXIS_FORWARD, AXIS_UP, AXIS_ROLL, AXIS_YAW, AXIS_PITCH, MAX_JOYSTICK_AXIS } joystickAxis_t; typedef enum { SE_NONE, // evTime is still valid SE_KEY, // evValue is a key code, evValue2 is the down flag SE_CHAR, // evValue is an ascii char SE_MOUSE, // evValue and evValue2 are reletive signed x / y moves SE_JOYSTICK_AXIS, // evValue is an axis number and evValue2 is the current state (-127 to 127) SE_CONSOLE, // evPtr is a char* SE_PACKET // evPtr is a netadr_t followed by data bytes to evPtrLength } sysEventType_t; typedef struct { int evTime; sysEventType_t evType; int evValue, evValue2; int evPtrLength; // bytes of data pointed to by evPtr, for journaling void *evPtr; // this must be manually freed if not NULL } sysEvent_t; sysEvent_t Sys_GetEvent( void ); void Sys_Init (void); char *Sys_GetCurrentUser( void ); void QDECL Sys_Error( const char *error, ...); void Sys_Quit (void); char *Sys_GetClipboardData( void ); // note that this isn't journaled... void Sys_Print( const char *msg ); // Sys_Milliseconds should only be used for profiling purposes, // any game related timing information should come from event timestamps int Sys_Milliseconds (void); // the system console is shown when a dedicated server is running void Sys_DisplaySystemConsole( qboolean show ); int Sys_GetProcessorId( void ); void Sys_BeginStreamedFile( fileHandle_t f, int readahead ); void Sys_EndStreamedFile( fileHandle_t f ); int Sys_StreamedRead( void *buffer, int size, int count, fileHandle_t f ); void Sys_StreamSeek( fileHandle_t f, int offset, int origin ); void Sys_ShowConsole( int level, qboolean quitOnClose ); void Sys_SetErrorText( const char *text ); qboolean Sys_CheckCD( void ); void Sys_Mkdir( const char *path ); char *Sys_Cwd( void ); char *Sys_DefaultCDPath(void); char *Sys_DefaultBasePath(void); char **Sys_ListFiles( const char *directory, const char *extension, int *numfiles, qboolean wantsubs ); void Sys_FreeFileList( char **list ); void Sys_BeginProfiling( void ); void Sys_EndProfiling( void ); byte* SCR_GetScreenshot(qboolean *qValid); void SCR_SetScreenshot(const byte *pbData, int w, int h); byte* SCR_TempRawImage_ReadFromFile(const char *psLocalFilename, int *piWidth, int *piHeight, byte *pbReSampleBuffer, qboolean qbVertFlip); void SCR_TempRawImage_CleanUp(); #endif //__QCOMMON_H__