// leave this line at the top for all g_xxxx.cpp files... #include "g_headers.h" #include "g_functions.h" #include "objectives.h" #include "../Icarus/IcarusInterface.h" int BMS_START = 0; int BMS_MID = 1; int BMS_END = 2; extern void G_SetEnemy( gentity_t *self, gentity_t *enemy ); void CalcTeamDoorCenter ( gentity_t *ent, vec3_t center ); void InitMover( gentity_t *ent ) ; /* =============================================================================== PUSHMOVE =============================================================================== */ void MatchTeam( gentity_t *teamLeader, int moverState, int time ); extern qboolean G_BoundsOverlap(const vec3_t mins1, const vec3_t maxs1, const vec3_t mins2, const vec3_t maxs2); typedef struct { gentity_t *ent; vec3_t origin; vec3_t angles; float deltayaw; } pushed_t; pushed_t pushed[MAX_GENTITIES], *pushed_p; /* ------------------------- G_SetLoopSound ------------------------- */ void G_PlayDoorLoopSound( gentity_t *ent ) { if ( VALIDSTRING( ent->soundSet ) == false ) return; sfxHandle_t sfx = CAS_GetBModelSound( ent->soundSet, BMS_MID ); if ( sfx == -1 ) { ent->s.loopSound = 0; return; } ent->s.loopSound = sfx; } /* ------------------------- G_PlayDoorSound ------------------------- */ void G_PlayDoorSound( gentity_t *ent, int type ) { if ( VALIDSTRING( ent->soundSet ) == false ) return; sfxHandle_t sfx = CAS_GetBModelSound( ent->soundSet, type ); if ( sfx == -1 ) return; vec3_t doorcenter; CalcTeamDoorCenter( ent, doorcenter ); if ( ent->activator && ent->activator->client && ent->activator->client->playerTeam == TEAM_PLAYER ) { AddSoundEvent( ent->activator, doorcenter, 128, AEL_MINOR, qfalse, qtrue ); } G_AddEvent( ent, EV_BMODEL_SOUND, sfx ); } /* ============ G_TestEntityPosition ============ */ gentity_t *G_TestEntityPosition( gentity_t *ent ) { trace_t tr; int mask; if ( (ent->client && ent->health <= 0) || !ent->clipmask ) {//corpse or something with no clipmask mask = MASK_SOLID; } else { mask = ent->clipmask; } if ( ent->client ) { gi.trace( &tr, ent->client->ps.origin, ent->mins, ent->maxs, ent->client->ps.origin, ent->s.number, mask ); } else { if ( ent->s.eFlags & EF_MISSILE_STICK )//Arggh, this is dumb...but when it used the bbox, it was pretty much always in solid when it is riding something..which is wrong..so I changed it to basically be a point contents check { gi.trace( &tr, ent->s.pos.trBase, vec3_origin, vec3_origin, ent->s.pos.trBase, ent->s.number, mask ); } else { gi.trace( &tr, ent->s.pos.trBase, ent->mins, ent->maxs, ent->s.pos.trBase, ent->s.number, mask ); } } if (tr.startsolid) return &g_entities[ tr.entityNum ]; return NULL; } /* ================== G_TryPushingEntity Returns qfalse if the move is blocked ================== */ extern qboolean G_OkayToRemoveCorpse( gentity_t *self ); qboolean G_TryPushingEntity( gentity_t *check, gentity_t *pusher, vec3_t move, vec3_t amove ) { vec3_t forward, right, up; vec3_t org, org2, move2; gentity_t *block; /* // EF_MOVER_STOP will just stop when contacting another entity // instead of pushing it, but entities can still ride on top of it if ( ( pusher->s.eFlags & EF_MOVER_STOP ) && check->s.groundEntityNum != pusher->s.number ) { return qfalse; } */ // save off the old position if (pushed_p > &pushed[MAX_GENTITIES]) { G_Error( "pushed_p > &pushed[MAX_GENTITIES]" ); } pushed_p->ent = check; VectorCopy (check->s.pos.trBase, pushed_p->origin); VectorCopy (check->s.apos.trBase, pushed_p->angles); if ( check->client ) { pushed_p->deltayaw = check->client->ps.delta_angles[YAW]; VectorCopy (check->client->ps.origin, pushed_p->origin); } pushed_p++; // we need this for pushing things later VectorSubtract (vec3_origin, amove, org); AngleVectors (org, forward, right, up); // try moving the contacted entity VectorAdd (check->s.pos.trBase, move, check->s.pos.trBase); if (check->client) { // make sure the client's view rotates when on a rotating mover check->client->ps.delta_angles[YAW] += ANGLE2SHORT(amove[YAW]); } // figure movement due to the pusher's amove VectorSubtract (check->s.pos.trBase, pusher->currentOrigin, org); org2[0] = DotProduct (org, forward); org2[1] = -DotProduct (org, right); org2[2] = DotProduct (org, up); VectorSubtract (org2, org, move2); VectorAdd (check->s.pos.trBase, move2, check->s.pos.trBase); if ( check->client ) { VectorAdd (check->client->ps.origin, move, check->client->ps.origin); VectorAdd (check->client->ps.origin, move2, check->client->ps.origin); } // may have pushed them off an edge if ( check->s.groundEntityNum != pusher->s.number ) { check->s.groundEntityNum = ENTITYNUM_NONE; } /* if ( check->client && check->health <= 0 && check->contents == CONTENTS_CORPSE ) {//sigh... allow pushing corpses into walls... problem is, they'll be stuck in there... maybe just remove them? return qtrue; } */ block = G_TestEntityPosition( check ); if (!block) { // pushed ok if ( check->client ) { VectorCopy( check->client->ps.origin, check->currentOrigin ); } else { VectorCopy( check->s.pos.trBase, check->currentOrigin ); } gi.linkentity (check); return qtrue; } // if it is ok to leave in the old position, do it // this is only relevent for riding entities, not pushed // Sliding trapdoors can cause this. VectorCopy( (pushed_p-1)->origin, check->s.pos.trBase); if ( check->client ) { VectorCopy( (pushed_p-1)->origin, check->client->ps.origin); } VectorCopy( (pushed_p-1)->angles, check->s.apos.trBase ); block = G_TestEntityPosition (check); if ( !block ) { check->s.groundEntityNum = ENTITYNUM_NONE; pushed_p--; return qtrue; } // blocked if ( pusher->damage ) {//Do damage if ( (pusher->spawnflags&MOVER_CRUSHER)//a crusher && check->s.clientNum >= MAX_CLIENTS//not the player && check->client //NPC && check->health <= 0 //dead && G_OkayToRemoveCorpse( check ) )//okay to remove him {//crusher stuck on a non->player corpse that does not have a key and is not running a script G_FreeEntity( check ); } else { G_Damage(check, pusher, pusher->activator, move, check->currentOrigin, pusher->damage, 0, MOD_CRUSH ); } } return qfalse; } /* ============ G_MoverPush Objects need to be moved back on a failed push, otherwise riders would continue to slide. If qfalse is returned, *obstacle will be the blocking entity ============ */ qboolean G_MoverPush( gentity_t *pusher, vec3_t move, vec3_t amove, gentity_t **obstacle ) { qboolean notMoving; int i, e; int listedEntities; vec3_t mins, maxs; vec3_t pusherMins, pusherMaxs, totalMins, totalMaxs; pushed_t *p; gentity_t *entityList[MAX_GENTITIES]; gentity_t *check; *obstacle = NULL; if ( !pusher->bmodel ) {//misc_model_breakable VectorAdd( pusher->currentOrigin, pusher->mins, pusherMins ); VectorAdd( pusher->currentOrigin, pusher->maxs, pusherMaxs ); } // mins/maxs are the bounds at the destination // totalMins / totalMaxs are the bounds for the entire move if ( pusher->currentAngles[0] || pusher->currentAngles[1] || pusher->currentAngles[2] || amove[0] || amove[1] || amove[2] ) { float radius; radius = RadiusFromBounds( pusher->mins, pusher->maxs ); for ( i = 0 ; i < 3 ; i++ ) { mins[i] = pusher->currentOrigin[i] + move[i] - radius; maxs[i] = pusher->currentOrigin[i] + move[i] + radius; totalMins[i] = mins[i] - move[i]; totalMaxs[i] = maxs[i] - move[i]; } } else { for (i=0 ; i<3 ; i++) { mins[i] = pusher->absmin[i] + move[i]; maxs[i] = pusher->absmax[i] + move[i]; } VectorCopy( pusher->absmin, totalMins ); VectorCopy( pusher->absmax, totalMaxs ); for (i=0 ; i<3 ; i++) { if ( move[i] > 0 ) { totalMaxs[i] += move[i]; } else { totalMins[i] += move[i]; } } } // unlink the pusher so we don't get it in the entityList gi.unlinkentity( pusher ); listedEntities = gi.EntitiesInBox( totalMins, totalMaxs, entityList, MAX_GENTITIES ); // move the pusher to it's final position VectorAdd( pusher->currentOrigin, move, pusher->currentOrigin ); VectorAdd( pusher->currentAngles, amove, pusher->currentAngles ); gi.linkentity( pusher ); notMoving = (VectorCompare( vec3_origin, move )&&VectorCompare( vec3_origin, amove )); // see if any solid entities are inside the final position for ( e = 0 ; e < listedEntities ; e++ ) { check = entityList[ e ]; if (( check->s.eFlags & EF_MISSILE_STICK ) && (notMoving || check->s.groundEntityNum < 0 || check->s.groundEntityNum >= ENTITYNUM_NONE )) { // special case hack for sticky things, destroy it if we aren't attached to the thing that is moving, but the moving thing is pushing us G_Damage( check, pusher, pusher, NULL, NULL, 99999, 0, MOD_CRUSH ); continue; } // only push items and players if ( check->s.eType != ET_ITEM ) { //FIXME: however it allows items to be pushed through stuff, do same for corpses? if ( check->s.eType != ET_PLAYER ) { if ( !( check->s.eFlags & EF_MISSILE_STICK )) { // cannot be pushed by this mover continue; } } /* else if ( check->health <= 0 ) {//For now, don't push on dead players continue; } */ else if ( !pusher->bmodel ) { vec3_t checkMins, checkMaxs; VectorAdd( check->currentOrigin, check->mins, checkMins ); VectorAdd( check->currentOrigin, check->maxs, checkMaxs ); if ( G_BoundsOverlap( checkMins, checkMaxs, pusherMins, pusherMaxs ) ) {//They're inside me already, no push - FIXME: we're testing a moves spot, aren't we, so we could have just moved inside them? continue; } } } if ( check->maxs[0] - check->mins[0] <= 0 && check->maxs[1] - check->mins[1] <= 0 && check->maxs[2] - check->mins[2] <= 0 ) {//no size, don't push continue; } // if the entity is standing on the pusher, it will definitely be moved if ( check->s.groundEntityNum != pusher->s.number ) { // see if the ent needs to be tested if ( check->absmin[0] >= maxs[0] || check->absmin[1] >= maxs[1] || check->absmin[2] >= maxs[2] || check->absmax[0] <= mins[0] || check->absmax[1] <= mins[1] || check->absmax[2] <= mins[2] ) { continue; } // see if the ent's bbox is inside the pusher's final position // this does allow a fast moving object to pass through a thin entity... if ( G_TestEntityPosition( check ) != pusher ) { continue; } } if ( ((pusher->spawnflags&2)&&!Q_stricmp("func_breakable",pusher->classname)) ||((pusher->spawnflags&16)&&!Q_stricmp("func_static",pusher->classname)) ) {//ugh, avoid stricmp with a unique flag //Damage on impact if ( pusher->damage ) {//Do damage G_Damage( check, pusher, pusher->activator, move, check->currentOrigin, pusher->damage, 0, MOD_CRUSH ); if ( pusher->health >= 0 && pusher->takedamage && !(pusher->spawnflags&1) ) {//do some damage to me, too G_Damage( pusher, check, pusher->activator, move, pusher->s.pos.trBase, floor(pusher->damage/4.0f), 0, MOD_CRUSH ); } } } // really need a flag like MOVER_TOUCH that calls the ent's touch function here, instead of this stricmp crap else if ( (pusher->spawnflags&2) && !Q_stricmp( "func_rotating", pusher->classname ) ) { GEntity_TouchFunc( pusher, check, NULL ); continue; // don't want it blocking so skip past it } vec3_t oldOrg; VectorCopy( check->s.pos.trBase, oldOrg ); // the entity needs to be pushed if ( G_TryPushingEntity( check, pusher, move, amove ) ) { // the mover wasn't blocked if ( check->s.eFlags & EF_MISSILE_STICK ) { if ( !VectorCompare( oldOrg, check->s.pos.trBase )) { // and the rider was actually pushed, so interpolate position change to smooth out the ride check->s.pos.trType = TR_INTERPOLATE; continue; } //else..the mover wasn't blocked & we are riding the mover & but the rider did not move even though the mover itself did...so // drop through and let it blow up the rider up } else { continue; } } // the move was blocked even after pushing this rider if ( check->s.eFlags & EF_MISSILE_STICK ) { // so nuke 'em so they don't block us anymore G_Damage( check, pusher, pusher, NULL, NULL, 99999, 0, MOD_CRUSH ); continue; } // save off the obstacle so we can call the block function (crush, etc) *obstacle = check; // move back any entities we already moved // go backwards, so if the same entity was pushed // twice, it goes back to the original position for ( p=pushed_p-1 ; p>=pushed ; p-- ) { VectorCopy (p->origin, p->ent->s.pos.trBase); VectorCopy (p->angles, p->ent->s.apos.trBase); if ( p->ent->client ) { p->ent->client->ps.delta_angles[YAW] = p->deltayaw; VectorCopy (p->origin, p->ent->client->ps.origin); } gi.linkentity (p->ent); } return qfalse; } return qtrue; } /* ================= G_MoverTeam ================= */ void G_MoverTeam( gentity_t *ent ) { vec3_t move, amove; gentity_t *part, *obstacle; vec3_t origin, angles; obstacle = NULL; // make sure all team slaves can move before commiting // any moves or calling any think functions // if the move is blocked, all moved objects will be backed out pushed_p = pushed; for (part = ent ; part ; part=part->teamchain) { // get current position part->s.eFlags &= ~EF_BLOCKED_MOVER; EvaluateTrajectory( &part->s.pos, level.time, origin ); EvaluateTrajectory( &part->s.apos, level.time, angles ); VectorSubtract( origin, part->currentOrigin, move ); VectorSubtract( angles, part->currentAngles, amove ); if ( !G_MoverPush( part, move, amove, &obstacle ) ) { break; // move was blocked } } if (part) { // if the pusher has a "blocked" function, call it // go back to the previous position for ( part = ent ; part ; part = part->teamchain ) { //Push up time so it doesn't wiggle when blocked part->s.pos.trTime += level.time - level.previousTime; part->s.apos.trTime += level.time - level.previousTime; EvaluateTrajectory( &part->s.pos, level.time, part->currentOrigin ); EvaluateTrajectory( &part->s.apos, level.time, part->currentAngles ); gi.linkentity( part ); part->s.eFlags |= EF_BLOCKED_MOVER; } if ( ent->e_BlockedFunc != blockedF_NULL ) {// this check no longer necessary, done internally below, but it's here for reference GEntity_BlockedFunc( ent, obstacle ); } return; } // the move succeeded for ( part = ent ; part ; part = part->teamchain ) { // call the reached function if time is at or past end point if ( part->s.pos.trType == TR_LINEAR_STOP || part->s.pos.trType == TR_NONLINEAR_STOP ) { if ( level.time >= part->s.pos.trTime + part->s.pos.trDuration ) { GEntity_ReachedFunc( part ); } } } } /* ================ G_RunMover ================ */ //void rebolt_turret( gentity_t *base ); void G_RunMover( gentity_t *ent ) { // if not a team captain, don't do anything, because // the captain will handle everything if ( ent->flags & FL_TEAMSLAVE ) { return; } // if stationary at one of the positions, don't move anything if ( ent->s.pos.trType != TR_STATIONARY || ent->s.apos.trType != TR_STATIONARY ) { G_MoverTeam( ent ); } /* if ( ent->classname && Q_stricmp("misc_turret", ent->classname ) == 0 ) { rebolt_turret( ent ); } */ // check think function G_RunThink( ent ); } /* ============================================================================ GENERAL MOVERS Doors, plats, and buttons are all binary (two position) movers Pos1 is "at rest", pos2 is "activated" ============================================================================ */ /* CalcTeamDoorCenter Finds all the doors of a team and returns their center position */ void CalcTeamDoorCenter ( gentity_t *ent, vec3_t center ) { vec3_t slavecenter; gentity_t *slave; //Start with our center VectorAdd(ent->mins, ent->maxs, center); VectorScale(center, 0.5, center); for ( slave = ent->teamchain ; slave ; slave = slave->teamchain ) { //Find slave's center VectorAdd(slave->mins, slave->maxs, slavecenter); VectorScale(slavecenter, 0.5, slavecenter); //Add that to our own, find middle VectorAdd(center, slavecenter, center); VectorScale(center, 0.5, center); } } /* =============== SetMoverState =============== */ void SetMoverState( gentity_t *ent, moverState_t moverState, int time ) { vec3_t delta; float f; ent->moverState = moverState; ent->s.pos.trTime = time; if ( ent->s.pos.trDuration <= 0 ) {//Don't allow divide by zero! ent->s.pos.trDuration = 1; } switch( moverState ) { case MOVER_POS1: VectorCopy( ent->pos1, ent->s.pos.trBase ); ent->s.pos.trType = TR_STATIONARY; break; case MOVER_POS2: VectorCopy( ent->pos2, ent->s.pos.trBase ); ent->s.pos.trType = TR_STATIONARY; break; case MOVER_1TO2: VectorCopy( ent->pos1, ent->s.pos.trBase ); VectorSubtract( ent->pos2, ent->pos1, delta ); f = 1000.0 / ent->s.pos.trDuration; VectorScale( delta, f, ent->s.pos.trDelta ); if ( ent->alt_fire ) { ent->s.pos.trType = TR_LINEAR_STOP; } else { ent->s.pos.trType = TR_NONLINEAR_STOP; } ent->s.eFlags &= ~EF_BLOCKED_MOVER; break; case MOVER_2TO1: VectorCopy( ent->pos2, ent->s.pos.trBase ); VectorSubtract( ent->pos1, ent->pos2, delta ); f = 1000.0 / ent->s.pos.trDuration; VectorScale( delta, f, ent->s.pos.trDelta ); if ( ent->alt_fire ) { ent->s.pos.trType = TR_LINEAR_STOP; } else { ent->s.pos.trType = TR_NONLINEAR_STOP; } ent->s.eFlags &= ~EF_BLOCKED_MOVER; break; } EvaluateTrajectory( &ent->s.pos, level.time, ent->currentOrigin ); gi.linkentity( ent ); } /* ================ MatchTeam All entities in a mover team will move from pos1 to pos2 in the same amount of time ================ */ void MatchTeam( gentity_t *teamLeader, int moverState, int time ) { gentity_t *slave; for ( slave = teamLeader ; slave ; slave = slave->teamchain ) { SetMoverState( slave, (moverState_t) moverState, time ); } } /* ================ ReturnToPos1 ================ */ void ReturnToPos1( gentity_t *ent ) { ent->e_ThinkFunc = thinkF_NULL; ent->nextthink = 0; ent->s.time = level.time; MatchTeam( ent, MOVER_2TO1, level.time ); // starting sound G_PlayDoorLoopSound( ent ); G_PlayDoorSound( ent, BMS_START ); //?? } /* ================ Reached_BinaryMover ================ */ void Reached_BinaryMover( gentity_t *ent ) { // stop the looping sound ent->s.loopSound = 0; if ( ent->moverState == MOVER_1TO2 ) {//reached open // reached pos2 SetMoverState( ent, MOVER_POS2, level.time ); vec3_t doorcenter; CalcTeamDoorCenter( ent, doorcenter ); if ( ent->activator && ent->activator->client && ent->activator->client->playerTeam == TEAM_PLAYER ) { AddSightEvent( ent->activator, doorcenter, 256, AEL_MINOR, 1 ); } // play sound G_PlayDoorSound( ent, BMS_END ); if ( ent->wait < 0 ) {//Done for good ent->e_ThinkFunc = thinkF_NULL; ent->nextthink = -1; ent->e_UseFunc = useF_NULL; } else { // return to pos1 after a delay ent->e_ThinkFunc = thinkF_ReturnToPos1; if(ent->spawnflags & 8) {//Toggle, keep think, wait for next use? ent->nextthink = -1; } else { ent->nextthink = level.time + ent->wait; } } // fire targets if ( !ent->activator ) { ent->activator = ent; } G_UseTargets2( ent, ent->activator, ent->opentarget ); } else if ( ent->moverState == MOVER_2TO1 ) {//closed // reached pos1 SetMoverState( ent, MOVER_POS1, level.time ); vec3_t doorcenter; CalcTeamDoorCenter( ent, doorcenter ); if ( ent->activator && ent->activator->client && ent->activator->client->playerTeam == TEAM_PLAYER ) { AddSightEvent( ent->activator, doorcenter, 256, AEL_MINOR, 1 ); } // play sound G_PlayDoorSound( ent, BMS_END ); // close areaportals if ( ent->teammaster == ent || !ent->teammaster ) { gi.AdjustAreaPortalState( ent, qfalse ); } G_UseTargets2( ent, ent->activator, ent->closetarget ); } else { G_Error( "Reached_BinaryMover: bad moverState" ); } } /* ================ Use_BinaryMover_Go ================ */ void Use_BinaryMover_Go( gentity_t *ent ) { int total; int partial; // gentity_t *other = ent->enemy; gentity_t *activator = ent->activator; ent->activator = activator; if ( ent->moverState == MOVER_POS1 ) { // start moving 50 msec later, becase if this was player // triggered, level.time hasn't been advanced yet MatchTeam( ent, MOVER_1TO2, level.time + 50 ); vec3_t doorcenter; CalcTeamDoorCenter( ent, doorcenter ); if ( ent->activator && ent->activator->client && ent->activator->client->playerTeam == TEAM_PLAYER ) { AddSightEvent( ent->activator, doorcenter, 256, AEL_MINOR, 1 ); } // starting sound G_PlayDoorLoopSound( ent ); G_PlayDoorSound( ent, BMS_START ); ent->s.time = level.time; // open areaportal if ( ent->teammaster == ent || !ent->teammaster ) { gi.AdjustAreaPortalState( ent, qtrue ); } G_UseTargets( ent, ent->activator ); return; } // if all the way up, just delay before coming down if ( ent->moverState == MOVER_POS2 ) { //have to do this because the delay sets our think to Use_BinaryMover_Go ent->e_ThinkFunc = thinkF_ReturnToPos1; if ( ent->spawnflags & 8 ) {//TOGGLE doors don't use wait! ent->nextthink = level.time + FRAMETIME; } else { ent->nextthink = level.time + ent->wait; } G_UseTargets2( ent, ent->activator, ent->target2 ); return; } // only partway down before reversing if ( ent->moverState == MOVER_2TO1 ) { total = ent->s.pos.trDuration-50; if ( ent->s.pos.trType == TR_NONLINEAR_STOP ) { vec3_t curDelta; VectorSubtract( ent->currentOrigin, ent->pos1, curDelta ); float fPartial = VectorLength( curDelta )/VectorLength( ent->s.pos.trDelta ); VectorScale( ent->s.pos.trDelta, fPartial, curDelta ); fPartial /= ent->s.pos.trDuration; fPartial /= 0.001f; fPartial = acos( fPartial ); fPartial = RAD2DEG( fPartial ); fPartial = (90.0f - fPartial)/90.0f*ent->s.pos.trDuration; partial = total - floor( fPartial ); } else { partial = level.time - ent->s.pos.trTime;//ent->s.time; } if ( partial > total ) { partial = total; } ent->s.pos.trTime = level.time - ( total - partial );//ent->s.time; MatchTeam( ent, MOVER_1TO2, ent->s.pos.trTime ); G_PlayDoorSound( ent, BMS_START ); return; } // only partway up before reversing if ( ent->moverState == MOVER_1TO2 ) { total = ent->s.pos.trDuration-50; if ( ent->s.pos.trType == TR_NONLINEAR_STOP ) { vec3_t curDelta; VectorSubtract( ent->currentOrigin, ent->pos2, curDelta ); float fPartial = VectorLength( curDelta )/VectorLength( ent->s.pos.trDelta ); VectorScale( ent->s.pos.trDelta, fPartial, curDelta ); fPartial /= ent->s.pos.trDuration; fPartial /= 0.001f; fPartial = acos( fPartial ); fPartial = RAD2DEG( fPartial ); fPartial = (90.0f - fPartial)/90.0f*ent->s.pos.trDuration; partial = total - floor( fPartial ); } else { partial = level.time - ent->s.pos.trTime;//ent->s.time; } if ( partial > total ) { partial = total; } ent->s.pos.trTime = level.time - ( total - partial );//ent->s.time; MatchTeam( ent, MOVER_2TO1, ent->s.pos.trTime ); G_PlayDoorSound( ent, BMS_START ); return; } } void UnLockDoors(gentity_t *const ent) { //noise? //go through and unlock the door and all the slaves gentity_t *slave = ent; do { // want to allow locked toggle doors, so keep the targetname if( !(slave->spawnflags & MOVER_TOGGLE) ) { slave->targetname = NULL;//not usable ever again } slave->spawnflags &= ~MOVER_LOCKED; slave->s.frame = 1;//second stage of anim slave = slave->teamchain; } while ( slave ); } void LockDoors(gentity_t *const ent) { //noise? //go through and lock the door and all the slaves gentity_t *slave = ent; do { slave->spawnflags |= MOVER_LOCKED; slave->s.frame = 0;//first stage of anim slave = slave->teamchain; } while ( slave ); } /* ================ Use_BinaryMover ================ */ void Use_BinaryMover( gentity_t *ent, gentity_t *other, gentity_t *activator ) { int key; char *text; if ( ent->e_UseFunc == useF_NULL ) {//I cannot be used anymore, must be a door with a wait of -1 that's opened. return; } // only the master should be used if ( ent->flags & FL_TEAMSLAVE ) { Use_BinaryMover( ent->teammaster, other, activator ); return; } if ( ent->svFlags & SVF_INACTIVE ) { return; } if ( ent->spawnflags & MOVER_LOCKED ) {//a locked door, unlock it UnLockDoors(ent); return; } if ( ent->spawnflags & MOVER_GOODIE ) { if ( ent->fly_sound_debounce_time > level.time ) { return; } else { key = INV_GoodieKeyCheck( activator ); if (key) {//activator has a goodie key, remove it activator->client->ps.inventory[key]--; G_Sound( activator, G_SoundIndex( "sound/movers/goodie_pass.wav" ) ); // once the goodie mover has been used, it no longer requires a goodie key ent->spawnflags &= ~MOVER_GOODIE; } else { //don't have a goodie key G_Sound( activator, G_SoundIndex( "sound/movers/goodie_fail.wav" ) ); ent->fly_sound_debounce_time = level.time + 5000; text = "cp @SP_INGAME_NEED_KEY_TO_OPEN"; //FIXME: temp message, only on certain difficulties?, graphic instead of text? gi.SendServerCommand( NULL, text ); return; } } } G_ActivateBehavior(ent,BSET_USE); G_SetEnemy( ent, other ); ent->activator = activator; if(ent->delay) { ent->e_ThinkFunc = thinkF_Use_BinaryMover_Go; ent->nextthink = level.time + ent->delay; } else { Use_BinaryMover_Go(ent); } } /* ================ InitMover "pos1", "pos2", and "speed" should be set before calling, so the movement delta can be calculated ================ */ void InitMoverTrData( gentity_t *ent ) { vec3_t move; float distance; ent->s.pos.trType = TR_STATIONARY; VectorCopy( ent->pos1, ent->s.pos.trBase ); // calculate time to reach second position from speed VectorSubtract( ent->pos2, ent->pos1, move ); distance = VectorLength( move ); if ( ! ent->speed ) { ent->speed = 100; } VectorScale( move, ent->speed, ent->s.pos.trDelta ); ent->s.pos.trDuration = distance * 1000 / ent->speed; if ( ent->s.pos.trDuration <= 0 ) { ent->s.pos.trDuration = 1; } } void InitMover( gentity_t *ent ) { float light; vec3_t color; qboolean lightSet, colorSet; // if the "model2" key is set, use a seperate model // for drawing, but clip against the brushes if ( ent->model2 ) { if ( strstr( ent->model2, ".glm" )) { ent->s.modelindex2 = G_ModelIndex( ent->model2 ); ent->playerModel = gi.G2API_InitGhoul2Model( ent->ghoul2, ent->model2, ent->s.modelindex2 ); if ( ent->playerModel >= 0 ) { ent->rootBone = gi.G2API_GetBoneIndex( &ent->ghoul2[ent->playerModel], "model_root", qtrue ); } ent->s.radius = 120; } else { ent->s.modelindex2 = G_ModelIndex( ent->model2 ); } } // if the "color" or "light" keys are set, setup constantLight lightSet = G_SpawnFloat( "light", "100", &light ); colorSet = G_SpawnVector( "color", "1 1 1", color ); if ( lightSet || colorSet ) { int r, g, b, i; r = color[0] * 255; if ( r > 255 ) { r = 255; } g = color[1] * 255; if ( g > 255 ) { g = 255; } b = color[2] * 255; if ( b > 255 ) { b = 255; } i = light / 4; if ( i > 255 ) { i = 255; } ent->s.constantLight = r | ( g << 8 ) | ( b << 16 ) | ( i << 24 ); } ent->e_UseFunc = useF_Use_BinaryMover; ent->e_ReachedFunc = reachedF_Reached_BinaryMover; ent->moverState = MOVER_POS1; ent->svFlags = SVF_USE_CURRENT_ORIGIN; if ( ent->spawnflags & MOVER_INACTIVE ) {// Make it inactive ent->svFlags |= SVF_INACTIVE; } if(ent->spawnflags & MOVER_PLAYER_USE) {//Can be used by the player's BUTTON_USE ent->svFlags |= SVF_PLAYER_USABLE; } ent->s.eType = ET_MOVER; VectorCopy( ent->pos1, ent->currentOrigin ); gi.linkentity( ent ); InitMoverTrData( ent ); } /* =============================================================================== DOOR A use can be triggered either by a touch function, by being shot, or by being targeted by another entity. =============================================================================== */ /* ================ Blocked_Door ================ */ void Blocked_Door( gentity_t *ent, gentity_t *other ) { // remove anything other than a client -- no longer the case // don't remove security keys or goodie keys if ( (other->s.eType == ET_ITEM) && (other->item->giTag >= INV_GOODIE_KEY && other->item->giTag <= INV_SECURITY_KEY) ) { // should we be doing anything special if a key blocks it... move it somehow..? } // if your not a client, or your a dead client remove yourself... else if ( other->s.number && (!other->client || (other->client && other->health <= 0 && other->contents == CONTENTS_CORPSE && !other->message)) ) { if ( !IIcarusInterface::GetIcarus()->IsRunning( other->m_iIcarusID ) /*!other->taskManager || !other->taskManager->IsRunning()*/ ) { // if an item or weapon can we do a little explosion..? G_FreeEntity( other ); return; } } if ( ent->damage ) { if ( (ent->spawnflags&MOVER_CRUSHER)//a crusher && other->s.clientNum >= MAX_CLIENTS//not the player && other->client //NPC && other->health <= 0 //dead && G_OkayToRemoveCorpse( other ) )//okay to remove him {//crusher stuck on a non->player corpse that does not have a key and is not running a script G_FreeEntity( other ); } else { G_Damage( other, ent, ent, NULL, NULL, ent->damage, 0, MOD_CRUSH ); } } if ( ent->spawnflags & MOVER_CRUSHER ) { return; // crushers don't reverse } // reverse direction Use_BinaryMover( ent, ent, other ); } /* ================ Touch_DoorTrigger ================ */ void Touch_DoorTrigger( gentity_t *ent, gentity_t *other, trace_t *trace ) { if ( ent->svFlags & SVF_INACTIVE ) { return; } if ( ent->owner->spawnflags & MOVER_LOCKED ) {//don't even try to use the door if it's locked return; } if ( ent->owner->moverState != MOVER_1TO2 ) {//Door is not already opening //if ( ent->owner->moverState == MOVER_POS1 || ent->owner->moverState == MOVER_2TO1 ) //{//only check these if closed or closing //If door is closed, opening or open, check this Use_BinaryMover( ent->owner, ent, other ); } /* //Old style if ( ent->owner->moverState != MOVER_1TO2 ) { Use_BinaryMover( ent->owner, ent, other ); } */ } /* ====================== Think_SpawnNewDoorTrigger All of the parts of a door have been spawned, so create a trigger that encloses all of them ====================== */ void Think_SpawnNewDoorTrigger( gentity_t *ent ) { gentity_t *other; vec3_t mins, maxs; int i, best; // set all of the slaves as shootable if ( ent->takedamage ) { for ( other = ent ; other ; other = other->teamchain ) { other->takedamage = qtrue; } } // find the bounds of everything on the team VectorCopy (ent->absmin, mins); VectorCopy (ent->absmax, maxs); for (other = ent->teamchain ; other ; other=other->teamchain) { AddPointToBounds (other->absmin, mins, maxs); AddPointToBounds (other->absmax, mins, maxs); } // find the thinnest axis, which will be the one we expand best = 0; for ( i = 1 ; i < 3 ; i++ ) { if ( maxs[i] - mins[i] < maxs[best] - mins[best] ) { best = i; } } maxs[best] += 120; mins[best] -= 120; // create a trigger with this size other = G_Spawn (); VectorCopy (mins, other->mins); VectorCopy (maxs, other->maxs); other->owner = ent; other->contents = CONTENTS_TRIGGER; other->e_TouchFunc = touchF_Touch_DoorTrigger; gi.linkentity (other); other->classname = "trigger_door"; MatchTeam( ent, ent->moverState, level.time ); } void Think_MatchTeam( gentity_t *ent ) { MatchTeam( ent, ent->moverState, level.time ); } qboolean G_EntIsDoor( int entityNum ) { if ( entityNum < 0 || entityNum >= ENTITYNUM_WORLD ) { return qfalse; } gentity_t *ent = &g_entities[entityNum]; if ( ent && !Q_stricmp( "func_door", ent->classname ) ) {//blocked by a door return qtrue; } return qfalse; } gentity_t *G_FindDoorTrigger( gentity_t *ent ) { gentity_t *owner = NULL; gentity_t *door = ent; if ( door->flags & FL_TEAMSLAVE ) {//not the master door, get the master door while ( door->teammaster && (door->flags&FL_TEAMSLAVE)) { door = door->teammaster; } } if ( door->targetname ) {//find out what is targeting it //FIXME: if ent->targetname, check what kind of trigger/ent is targetting it? If a normal trigger (active, etc), then it's okay? while ( (owner = G_Find( owner, FOFS( target ), door->targetname )) != NULL ) { if ( owner && (owner->contents&CONTENTS_TRIGGER) ) { return owner; } } owner = NULL; while ( (owner = G_Find( owner, FOFS( target2 ), door->targetname )) != NULL ) { if ( owner && (owner->contents&CONTENTS_TRIGGER) ) { return owner; } } } owner = NULL; while ( (owner = G_Find( owner, FOFS( classname ), "trigger_door" )) != NULL ) { if ( owner->owner == door ) { return owner; } } return NULL; } qboolean G_TriggerActive( gentity_t *self ); qboolean G_EntIsUnlockedDoor( int entityNum ) { if ( entityNum < 0 || entityNum >= ENTITYNUM_WORLD ) { return qfalse; } if ( G_EntIsDoor( entityNum ) ) { gentity_t *ent = &g_entities[entityNum]; gentity_t *owner = NULL; if ( ent->flags & FL_TEAMSLAVE ) {//not the master door, get the master door while ( ent->teammaster && (ent->flags&FL_TEAMSLAVE)) { ent = ent->teammaster; } } if ( ent->targetname ) {//find out what is targetting it owner = NULL; //FIXME: if ent->targetname, check what kind of trigger/ent is targetting it? If a normal trigger (active, etc), then it's okay? while ( (owner = G_Find( owner, FOFS( target ), ent->targetname )) != NULL ) { if ( !Q_stricmp( "trigger_multiple", owner->classname ) || !Q_stricmp( "trigger_once", owner->classname ) )//FIXME: other triggers okay too? { if ( G_TriggerActive( owner ) ) { return qtrue; } } } owner = NULL; while ( (owner = G_Find( owner, FOFS( target2 ), ent->targetname )) != NULL ) { if ( !Q_stricmp( "trigger_multiple", owner->classname ) )//FIXME: other triggers okay too? { if ( G_TriggerActive( owner ) ) { return qtrue; } } } return qfalse; } else {//check the door's auto-created trigger instead owner = G_FindDoorTrigger( ent ); if ( owner && (owner->svFlags&SVF_INACTIVE) ) {//owning auto-created trigger is inactive return qfalse; } } if ( !(ent->svFlags & SVF_INACTIVE) && //assumes that the reactivate trigger isn't right next to the door! !ent->health && !(ent->spawnflags & MOVER_PLAYER_USE) && !(ent->spawnflags & MOVER_FORCE_ACTIVATE) && !(ent->spawnflags & MOVER_LOCKED)) //FIXME: what about MOVER_GOODIE? { return qtrue; } } return qfalse; } /*QUAKED func_door (0 .5 .8) ? START_OPEN FORCE_ACTIVATE CRUSHER TOGGLE LOCKED GOODIE PLAYER_USE INACTIVE START_OPEN the door to moves to its destination when spawned, and operate in reverse. It is used to temporarily or permanently close off an area when triggered (not useful for touch or takedamage doors). FORCE_ACTIVATE Can only be activated by a force push or pull CRUSHER ? TOGGLE wait in both the start and end states for a trigger event - does NOT work on Trek doors. LOCKED Starts locked, with the shader animmap at the first frame and inactive. Once used, the animmap changes to the second frame and the door operates normally. Note that you cannot use the door again after this. GOODIE Door will not work unless activator has a "goodie key" in his inventory PLAYER_USE Player can use it with the use button INACTIVE must be used by a target_activate before it can be used "target" Door fires this when it starts moving from it's closed position to its open position. "opentarget" Door fires this after reaching its "open" position "target2" Door fires this when it starts moving from it's open position to its closed position. "closetarget" Door fires this after reaching its "closed" position "model2" .md3 model to also draw "modelAngles" md3 model's angles (in addition to any rotation on the part of the brush entity itself) "angle" determines the opening direction "targetname" if set, no touch field will be spawned and a remote button or trigger field activates the door. "speed" movement speed (100 default) "wait" wait before returning (3 default, -1 = never return) "delay" when used, how many seconds to wait before moving - default is none "lip" lip remaining at end of move (8 default) "dmg" damage to inflict when blocked (2 default, set to negative for no damage) "color" constantLight color "light" constantLight radius "health" if set, the door must be shot open "sounds" - sound door makes when opening/closing "linear" set to 1 and it will move linearly rather than with acceleration (default is 0) 0 - no sound (default) */ void SP_func_door (gentity_t *ent) { vec3_t abs_movedir; float distance; vec3_t size; float lip; ent->e_BlockedFunc = blockedF_Blocked_Door; if ( ent->spawnflags & MOVER_GOODIE ) { G_SoundIndex( "sound/movers/goodie_fail.wav" ); G_SoundIndex( "sound/movers/goodie_pass.wav" ); } // default speed of 400 if (!ent->speed) ent->speed = 400; // default wait of 2 seconds if (!ent->wait) ent->wait = 2; ent->wait *= 1000; ent->delay *= 1000; // default lip of 8 units G_SpawnFloat( "lip", "8", &lip ); // default damage of 2 points G_SpawnInt( "dmg", "2", &ent->damage ); if ( ent->damage < 0 ) { ent->damage = 0; } // first position at start VectorCopy( ent->s.origin, ent->pos1 ); // calculate second position gi.SetBrushModel( ent, ent->model ); G_SetMovedir( ent->s.angles, ent->movedir ); abs_movedir[0] = fabs( ent->movedir[0] ); abs_movedir[1] = fabs( ent->movedir[1] ); abs_movedir[2] = fabs( ent->movedir[2] ); VectorSubtract( ent->maxs, ent->mins, size ); distance = DotProduct( abs_movedir, size ) - lip; VectorMA( ent->pos1, distance, ent->movedir, ent->pos2 ); // if "start_open", reverse position 1 and 2 if ( ent->spawnflags & 1 ) { vec3_t temp; VectorCopy( ent->pos2, temp ); VectorCopy( ent->s.origin, ent->pos2 ); VectorCopy( temp, ent->pos1 ); } if ( ent->spawnflags & MOVER_LOCKED ) {//a locked door, set up as locked until used directly ent->s.eFlags |= EF_SHADER_ANIM;//use frame-controlled shader anim ent->s.frame = 0;//first stage of anim } InitMover( ent ); ent->nextthink = level.time + FRAMETIME; if ( !(ent->flags&FL_TEAMSLAVE) ) { int health; G_SpawnInt( "health", "0", &health ); if ( health ) { ent->takedamage = qtrue; } if ( !(ent->spawnflags&MOVER_LOCKED) && (ent->targetname || health || ent->spawnflags & MOVER_PLAYER_USE || ent->spawnflags & MOVER_FORCE_ACTIVATE) ) { // non touch/shoot doors ent->e_ThinkFunc = thinkF_Think_MatchTeam; } else {//locked doors still spawn a trigger ent->e_ThinkFunc = thinkF_Think_SpawnNewDoorTrigger; } } } /* =============================================================================== PLAT =============================================================================== */ /* ============== Touch_Plat Don't allow decent if a living player is on it =============== */ void Touch_Plat( gentity_t *ent, gentity_t *other, trace_t *trace ) { if ( !other->client || other->client->ps.stats[STAT_HEALTH] <= 0 ) { return; } // delay return-to-pos1 by one second if ( ent->moverState == MOVER_POS2 ) { ent->nextthink = level.time + 1000; } } /* ============== Touch_PlatCenterTrigger If the plat is at the bottom position, start it going up =============== */ void Touch_PlatCenterTrigger(gentity_t *ent, gentity_t *other, trace_t *trace ) { if ( !other->client ) { return; } if ( ent->owner->moverState == MOVER_POS1 ) { Use_BinaryMover( ent->owner, ent, other ); } } /* ================ SpawnPlatTrigger Spawn a trigger in the middle of the plat's low position Elevator cars require that the trigger extend through the entire low position, not just sit on top of it. ================ */ void SpawnPlatTrigger( gentity_t *ent ) { gentity_t *trigger; vec3_t tmin, tmax; // the middle trigger will be a thin trigger just // above the starting position trigger = G_Spawn(); trigger->e_TouchFunc = touchF_Touch_PlatCenterTrigger; trigger->contents = CONTENTS_TRIGGER; trigger->owner = ent; tmin[0] = ent->pos1[0] + ent->mins[0] + 33; tmin[1] = ent->pos1[1] + ent->mins[1] + 33; tmin[2] = ent->pos1[2] + ent->mins[2]; tmax[0] = ent->pos1[0] + ent->maxs[0] - 33; tmax[1] = ent->pos1[1] + ent->maxs[1] - 33; tmax[2] = ent->pos1[2] + ent->maxs[2] + 8; if ( tmax[0] <= tmin[0] ) { tmin[0] = ent->pos1[0] + (ent->mins[0] + ent->maxs[0]) *0.5; tmax[0] = tmin[0] + 1; } if ( tmax[1] <= tmin[1] ) { tmin[1] = ent->pos1[1] + (ent->mins[1] + ent->maxs[1]) *0.5; tmax[1] = tmin[1] + 1; } VectorCopy (tmin, trigger->mins); VectorCopy (tmax, trigger->maxs); gi.linkentity (trigger); } /*QUAKED func_plat (0 .5 .8) ? x x x x x x PLAYER_USE INACTIVE PLAYER_USE Player can use it with the use button INACTIVE must be used by a target_activate before it can be used Plats are always drawn in the extended position so they will light correctly. "lip" default 8, protrusion above rest position "height" total height of movement, defaults to model height "speed" overrides default 200. "dmg" overrides default 2 "model2" .md3 model to also draw "modelAngles" md3 model's angles (in addition to any rotation on the part of the brush entity itself) "color" constantLight color "light" constantLight radius */ void SP_func_plat (gentity_t *ent) { float lip, height; // ent->sound1to2 = ent->sound2to1 = G_SoundIndex("sound/movers/plats/pt1_strt.wav"); // ent->soundPos1 = ent->soundPos2 = G_SoundIndex("sound/movers/plats/pt1_end.wav"); VectorClear (ent->s.angles); G_SpawnFloat( "speed", "200", &ent->speed ); G_SpawnInt( "dmg", "2", &ent->damage ); G_SpawnFloat( "wait", "1", &ent->wait ); G_SpawnFloat( "lip", "8", &lip ); ent->wait = 1000; // create second position gi.SetBrushModel( ent, ent->model ); if ( !G_SpawnFloat( "height", "0", &height ) ) { height = (ent->maxs[2] - ent->mins[2]) - lip; } // pos1 is the rest (bottom) position, pos2 is the top VectorCopy( ent->s.origin, ent->pos2 ); VectorCopy( ent->pos2, ent->pos1 ); ent->pos1[2] -= height; InitMover( ent ); // touch function keeps the plat from returning while // a live player is standing on it ent->e_TouchFunc = touchF_Touch_Plat; ent->e_BlockedFunc = blockedF_Blocked_Door; ent->owner = ent; // so it can be treated as a door // spawn the trigger if one hasn't been custom made if ( !ent->targetname ) { SpawnPlatTrigger(ent); } } /* =============================================================================== BUTTON =============================================================================== */ /* ============== Touch_Button =============== */ void Touch_Button(gentity_t *ent, gentity_t *other, trace_t *trace ) { if ( !other->client ) { return; } if ( ent->moverState == MOVER_POS1 ) { Use_BinaryMover( ent, other, other ); } } /*QUAKED func_button (0 .5 .8) ? x x x x x x PLAYER_USE INACTIVE PLAYER_USE Player can use it with the use button INACTIVE must be used by a target_activate before it can be used When a button is touched, it moves some distance in the direction of it's angle, triggers all of it's targets, waits some time, then returns to it's original position where it can be triggered again. "model2" .md3 model to also draw "modelAngles" md3 model's angles (in addition to any rotation on the part of the brush entity itself) "angle" determines the opening direction "target" all entities with a matching targetname will be used "speed" override the default 40 speed "wait" override the default 1 second wait (-1 = never return) "lip" override the default 4 pixel lip remaining at end of move "health" if set, the button must be killed instead of touched "color" constantLight color "light" constantLight radius */ void SP_func_button( gentity_t *ent ) { vec3_t abs_movedir; float distance; vec3_t size; float lip; // ent->sound1to2 = G_SoundIndex("sound/movers/switches/butn2.wav"); if ( !ent->speed ) { ent->speed = 40; } if ( !ent->wait ) { ent->wait = 1; } ent->wait *= 1000; // first position VectorCopy( ent->s.origin, ent->pos1 ); // calculate second position gi.SetBrushModel( ent, ent->model ); G_SpawnFloat( "lip", "4", &lip ); G_SetMovedir( ent->s.angles, ent->movedir ); abs_movedir[0] = fabs(ent->movedir[0]); abs_movedir[1] = fabs(ent->movedir[1]); abs_movedir[2] = fabs(ent->movedir[2]); VectorSubtract( ent->maxs, ent->mins, size ); distance = abs_movedir[0] * size[0] + abs_movedir[1] * size[1] + abs_movedir[2] * size[2] - lip; VectorMA (ent->pos1, distance, ent->movedir, ent->pos2); if (ent->health) { // shootable button ent->takedamage = qtrue; } else { // touchable button ent->e_TouchFunc = touchF_Touch_Button; } InitMover( ent ); } /* =============================================================================== TRAIN =============================================================================== */ #define TRAIN_START_ON 1 #define TRAIN_TOGGLE 2 #define TRAIN_BLOCK_STOPS 4 /* =============== Think_BeginMoving The wait time at a corner has completed, so start moving again =============== */ void Think_BeginMoving( gentity_t *ent ) { if ( ent->spawnflags & 2048 ) { // this tie fighter hack is done for doom_detention, where the shooting gallery takes place. let them draw again when they start moving ent->s.eFlags &= ~EF_NODRAW; } ent->s.pos.trTime = level.time; if ( ent->alt_fire ) { ent->s.pos.trType = TR_LINEAR_STOP; } else { ent->s.pos.trType = TR_NONLINEAR_STOP; } } /* =============== Reached_Train =============== */ void Reached_Train( gentity_t *ent ) { gentity_t *next; float speed; vec3_t move; float length; // copy the apropriate values next = ent->nextTrain; if ( !next || !next->nextTrain ) { //FIXME: can we go backwards- say if we are toggle-able? return; // just stop } // fire all other targets G_UseTargets( next, ent ); // set the new trajectory ent->nextTrain = next->nextTrain; VectorCopy( next->s.origin, ent->pos1 ); VectorCopy( next->nextTrain->s.origin, ent->pos2 ); // if the path_corner has a speed, use that if ( next->speed ) { speed = next->speed; } else { // otherwise use the train's speed speed = ent->speed; } if ( speed < 1 ) { speed = 1; } // calculate duration VectorSubtract( ent->pos2, ent->pos1, move ); length = VectorLength( move ); ent->s.pos.trDuration = length * 1000 / speed; // looping sound /* if ( VALIDSTRING( next->soundSet ) ) { ent->s.loopSound = CAS_GetBModelSound( next->soundSet, BMS_MID );//ent->soundLoop; } */ G_PlayDoorLoopSound( ent ); // start it going SetMoverState( ent, MOVER_1TO2, level.time ); if (( next->spawnflags & 1 )) { vec3_t angs; vectoangles( move, angs ); AnglesSubtract( angs, ent->currentAngles, angs ); for ( int i = 0; i < 3; i++ ) { AngleNormalize360( angs[i] ); } VectorCopy( ent->currentAngles, ent->s.apos.trBase ); VectorScale( angs, 0.5f, ent->s.apos.trDelta ); ent->s.apos.trTime = level.time; ent->s.apos.trDuration = 2000; if ( ent->alt_fire ) { ent->s.apos.trType = TR_LINEAR_STOP; } else { ent->s.apos.trType = TR_NONLINEAR_STOP; } } else { if (( next->spawnflags & 4 )) {//yaw vec3_t angs; vectoangles( move, angs ); AnglesSubtract( angs, ent->currentAngles, angs ); for ( int i = 0; i < 3; i++ ) { AngleNormalize360( angs[i] ); } VectorCopy( ent->currentAngles, ent->s.apos.trBase ); ent->s.apos.trDelta[YAW] = angs[YAW] * 0.5f; if (( next->spawnflags & 8 )) {//roll, too ent->s.apos.trDelta[ROLL] = angs[YAW] * -0.1f; } ent->s.apos.trTime = level.time; ent->s.apos.trDuration = 2000; if ( ent->alt_fire ) { ent->s.apos.trType = TR_LINEAR_STOP; } else { ent->s.apos.trType = TR_NONLINEAR_STOP; } } } // This is for the tie fighter shooting gallery on doom detention, you could see them waiting under the bay, but the architecture couldn't easily be changed.. if (( next->spawnflags & 2 )) { ent->s.eFlags |= EF_NODRAW; // make us invisible until we start moving again } // if there is a "wait" value on the target, don't start moving yet if ( next->wait ) { ent->nextthink = level.time + next->wait * 1000; ent->e_ThinkFunc = thinkF_Think_BeginMoving; ent->s.pos.trType = TR_STATIONARY; } else if (!( next->spawnflags & 2 )) { // we aren't waiting to start, so let us draw right away ent->s.eFlags &= ~EF_NODRAW; } } void TrainUse( gentity_t *ent, gentity_t *other, gentity_t *activator ) { Reached_Train( ent ); } /* =============== Think_SetupTrainTargets Link all the corners together =============== */ void Think_SetupTrainTargets( gentity_t *ent ) { gentity_t *path, *next, *start; ent->nextTrain = G_Find( NULL, FOFS(targetname), ent->target ); if ( !ent->nextTrain ) { gi.Printf( "func_train at %s with an unfound target\n", vtos(ent->absmin) ); //Free me?` return; } //FIXME: this can go into an infinite loop if last path_corner doesn't link to first //path_corner, like so: // t1---->t2---->t3 // ^ | // \_____| start = NULL; next = NULL; int iterations = 2000; //max attempts to find our path start for ( path = ent->nextTrain ; path != start ; path = next ) { if (!iterations--) { G_Error( "Think_SetupTrainTargets: last path_corner doesn't link back to first on func_train(%s)", vtos(ent->absmin) ); } if (!start) { start = path; } if ( !path->target ) { // gi.Printf( "Train corner at %s without a target\n", vtos(path->s.origin) ); //end of path break; } // find a path_corner among the targets // there may also be other targets that get fired when the corner // is reached next = NULL; do { next = G_Find( next, FOFS(targetname), path->target ); if ( !next ) { // gi.Printf( "Train corner at %s without a target path_corner\n", vtos(path->s.origin) ); //end of path break; } } while ( strcmp( next->classname, "path_corner" ) ); if ( next ) { path->nextTrain = next; } else { break; } } if ( !ent->targetname || (ent->spawnflags&1) /*start on*/) { // start the train moving from the first corner Reached_Train( ent ); } else { G_SetOrigin( ent, ent->s.origin ); } } /*QUAKED path_corner (.5 .3 0) (-8 -8 -8) (8 8 8) TURN_TRAIN INVISIBLE YAW_TRAIN ROLL_TRAIN TURN_TRAIN func_train moving on this path will turn to face the next path_corner within 2 seconds INVISIBLE - train will become invisible ( but still solid ) when it reaches this path_corner. It will become visible again at the next path_corner that does not have this option checked Train path corners. Target: next path corner and other targets to fire "speed" speed to move to the next corner "wait" seconds to wait before behining move to next corner */ void SP_path_corner( gentity_t *self ) { if ( !self->targetname ) { gi.Printf ("path_corner with no targetname at %s\n", vtos(self->s.origin)); G_FreeEntity( self ); return; } // path corners don't need to be linked in VectorCopy(self->s.origin, self->currentOrigin); } void func_train_die( gentity_t *self, gentity_t *inflictor, gentity_t *attacker, int damage, int mod, int dFlags, int hitLoc ) { if ( self->target3 ) { G_UseTargets2( self, self, self->target3 ); } //HACKHACKHACKHACK G_PlayEffect( "explosions/fighter_explosion2", self->currentOrigin ); G_FreeEntity( self ); //HACKHACKHACKHACK } /*QUAKED func_train (0 .5 .8) ? START_ON TOGGLE BLOCK_STOPS x x LOOP PLAYER_USE INACTIVE TIE LOOP - if it's a ghoul2 model, it will just loop the animation PLAYER_USE Player can use it with the use button INACTIVE must be used by a target_activate before it can be used TIE flying Tie-fighter hack, should be made more flexible so other things can use this if needed A train is a mover that moves between path_corner target points. Trains MUST HAVE AN ORIGIN BRUSH. The train spawns at the first target it is pointing at. "model2" .md3 model to also draw "modelAngles" md3 model's angles (in addition to any rotation on the part of the brush entity itself) "speed" default 100 "dmg" default 2 "health" default 0 "noise" looping sound to play when the train is in motion "targetname" will not start until used "target" next path corner "target3" what to use when it breaks "color" constantLight color "light" constantLight radius "linear" set to 1 and it will move linearly rather than with acceleration (default is 0) "startframe" default 0...ghoul2 animation start frame "endframe" default 0...ghoul2 animation end frame */ void SP_func_train (gentity_t *self) { VectorClear (self->s.angles); if (self->spawnflags & TRAIN_BLOCK_STOPS) { self->damage = 0; } else { if (!self->damage) { self->damage = 2; } } if ( !self->speed ) { self->speed = 100; } if ( !self->target ) { gi.Printf ("func_train without a target at %s\n", vtos(self->absmin)); G_FreeEntity( self ); return; } char *noise; G_SpawnInt( "startframe", "0", &self->startFrame ); G_SpawnInt( "endframe", "0", &self->endFrame ); if ( G_SpawnString( "noise", "", &noise ) ) { if ( VALIDSTRING( noise ) ) { self->s.loopSound = cgi_S_RegisterSound( noise );//G_SoundIndex( noise ); } } gi.SetBrushModel( self, self->model ); InitMover( self ); if ( self->spawnflags & 2048 ) // TIE HACK { //HACKHACKHACKHACKHACKHACKHACKHACKHACKHACKHACKHACKHACKHACKHACKHACKHACKHACKHACKHACK self->s.modelindex2 = G_ModelIndex( "models/map_objects/ships/tie_fighter.md3" ); G_EffectIndex( "explosions/fighter_explosion2" ); self->contents = CONTENTS_SHOTCLIP; self->takedamage = qtrue; VectorSet( self->maxs, 112, 112, 112 ); VectorSet( self->mins, -112, -112, -112 ); self->e_DieFunc = dieF_func_train_die; gi.linkentity( self ); //HACKHACKHACKHACKHACKHACKHACKHACKHACKHACKHACKHACKHACKHACKHACKHACKHACKHACKHACKHACK } if ( self->targetname ) { self->e_UseFunc = useF_TrainUse; } self->e_ReachedFunc = reachedF_Reached_Train; // start trains on the second frame, to make sure their targets have had // a chance to spawn self->nextthink = level.time + START_TIME_LINK_ENTS; self->e_ThinkFunc = thinkF_Think_SetupTrainTargets; if ( self->playerModel >= 0 && self->spawnflags & 32 ) // loop...dunno, could support it on other things, but for now I need it for the glider...so...kill the flag { self->spawnflags &= ~32; // once only gi.G2API_SetBoneAnim( &self->ghoul2[self->playerModel], "model_root", self->startFrame, self->endFrame, BONE_ANIM_OVERRIDE_LOOP, 1.0f + crandom() * 0.1f, 0 ); self->endFrame = 0; // don't allow it to do anything with the animation function in G_main } } /* =============================================================================== STATIC =============================================================================== */ /*QUAKED func_static (0 .5 .8) ? F_PUSH F_PULL SWITCH_SHADER CRUSHER IMPACT SOLITARY PLAYER_USE INACTIVE BROADCAST F_PUSH Will be used when you Force-Push it F_PULL Will be used when you Force-Pull it SWITCH_SHADER Toggle the shader anim frame between 1 and 2 when used CRUSHER Make it do damage when it's blocked IMPACT Make it do damage when it hits any entity SOLITARY Can only be pushed when directly under crosshair, when pushed you shall push nothing else BUT me. PLAYER_USE Player can use it with the use button INACTIVE must be used by a target_activate before it can be used BROADCAST don't ever use this, it's evil A bmodel that just sits there, doing nothing. Can be used for conditional walls and models. "model2" .md3 model to also draw "modelAngles" md3 model's angles (in addition to any rotation on the part of the brush entity itself) "color" constantLight color "light" constantLight radius "dmg" how much damage to do when it crushes (use with CRUSHER spawnflag default is 2) "linear" set to 1 and it will move linearly rather than with acceleration (default is 0) "NPC_targetname" if set up to be push/pullable, only this NPC can push/pull it (for the player, use "player") */ void SP_func_static( gentity_t *ent ) { gi.SetBrushModel( ent, ent->model ); VectorCopy( ent->s.origin, ent->pos1 ); VectorCopy( ent->s.origin, ent->pos2 ); InitMover( ent ); G_SetOrigin( ent, ent->s.origin ); G_SetAngles( ent, ent->s.angles ); ent->e_UseFunc = useF_func_static_use; ent->e_ReachedFunc = reachedF_NULL; if( ent->spawnflags & 2048 ) { // yes this is very very evil, but for now (pre-alpha) it's a solution ent->svFlags |= SVF_BROADCAST; // I need to rotate something that is huge and it's touching too many area portals... } if ( ent->spawnflags & 4/*SWITCH_SHADER*/ ) { ent->s.eFlags |= EF_SHADER_ANIM;//use frame-controlled shader anim ent->s.frame = 0;//first stage of anim ent->spawnflags &= ~4;//this is the CRUSHER spawnflag! remove it! } if ( ent->spawnflags & 8 ) {//!!! 8 is NOT the crusher spawnflag, 4 is!!! ent->spawnflags &= ~8; ent->spawnflags |= MOVER_CRUSHER; if ( !ent->damage ) { ent->damage = 2; } } gi.linkentity( ent ); if (level.mBSPInstanceDepth) { // this means that this guy will never be updated, moved, changed, etc. ent->s.eFlags = EF_PERMANENT; } } void func_static_use ( gentity_t *self, gentity_t *other, gentity_t *activator ) { G_ActivateBehavior( self, BSET_USE ); if ( self->spawnflags & 4/*SWITCH_SHADER*/ ) { self->s.frame = self->s.frame ? 0 : 1;//toggle frame } G_UseTargets( self, activator ); } /* =============================================================================== ROTATING =============================================================================== */ void func_rotating_touch( gentity_t *self, gentity_t *other, trace_t *trace ) { // vec3_t spot; // gentity_t *tent; if( !other->client ) // don't want to disintegrate items or weapons, etc... { return; } // yeah, this is a bit hacky... if( self->s.apos.trType != TR_STATIONARY && !(other->flags & FL_DISINTEGRATED) ) // only damage if it's moving { // VectorCopy( self->currentOrigin, spot ); // tent = G_TempEntity( spot, EV_DISINTEGRATION ); // tent->s.eventParm = PW_DISRUPTION; // tent->owner = self; // let G_Damage call the fx instead, beside, this way you can disintegrate a corpse this way G_Sound( other, G_SoundIndex( "sound/effects/energy_crackle.wav" ) ); G_Damage( other, self, self, NULL, NULL, 10000, DAMAGE_NO_KNOCKBACK, MOD_SNIPER ); } } void func_rotating_use( gentity_t *self, gentity_t *other, gentity_t *activator ) { if( self->s.apos.trType == TR_LINEAR ) { self->s.apos.trType = TR_STATIONARY; // stop the sound if it stops moving self->s.loopSound = 0; // play stop sound too? if ( VALIDSTRING( self->soundSet ) == true ) { G_AddEvent( self, EV_BMODEL_SOUND, CAS_GetBModelSound( self->soundSet, BMS_END )); } } else { if ( VALIDSTRING( self->soundSet ) == true ) { G_AddEvent( self, EV_BMODEL_SOUND, CAS_GetBModelSound( self->soundSet, BMS_START )); self->s.loopSound = CAS_GetBModelSound( self->soundSet, BMS_MID ); if ( self->s.loopSound < 0 ) { self->s.loopSound = 0; } } self->s.apos.trType = TR_LINEAR; } } /*QUAKED func_rotating (0 .5 .8) ? START_ON TOUCH_KILL X_AXIS Y_AXIS x x PLAYER_USE INACTIVE PLAYER_USE Player can use it with the use button TOUCH_KILL Inflicts massive damage upon touching it, disitegrates bodies INACTIVE must be used by a target_activate before it can be used You need to have an origin brush as part of this entity. The center of that brush will be the point around which it is rotated. It will rotate around the Z axis by default. You can check either the X_AXIS or Y_AXIS box to change that. "model2" .md3 model to also draw "modelAngles" md3 model's angles (in addition to any rotation on the part of the brush entity itself) "speed" determines how fast it moves; default value is 100. "dmg" damage to inflict when blocked (2 default) "color" constantLight color "light" constantLight radius */ void SP_func_rotating (gentity_t *ent) { if ( !ent->speed ) { ent->speed = 100; } ent->s.apos.trType = TR_STATIONARY; if( ent->spawnflags & 1 ) // start on { ent->s.apos.trType = TR_LINEAR; } // set the axis of rotation if ( ent->spawnflags & 4 ) { ent->s.apos.trDelta[2] = ent->speed; } else if ( ent->spawnflags & 8 ) { ent->s.apos.trDelta[0] = ent->speed; } else { ent->s.apos.trDelta[1] = ent->speed; } if (!ent->damage) { ent->damage = 2; } gi.SetBrushModel( ent, ent->model ); InitMover( ent ); if ( ent->targetname ) { ent->e_UseFunc = useF_func_rotating_use; } VectorCopy( ent->s.origin, ent->s.pos.trBase ); VectorCopy( ent->s.pos.trBase, ent->currentOrigin ); VectorCopy( ent->s.apos.trBase, ent->currentAngles ); if( ent->spawnflags & 2 ) { ent->e_TouchFunc = touchF_func_rotating_touch; G_SoundIndex( "sound/effects/energy_crackle.wav" ); } gi.linkentity( ent ); } /* =============================================================================== BOBBING =============================================================================== */ void func_bobbing_use( gentity_t *self, gentity_t *other, gentity_t *activator ) { // Toggle our move state if ( self->s.pos.trType == TR_SINE ) { self->s.pos.trType = TR_INTERPOLATE; // Save off roughly where we were VectorCopy( self->currentOrigin, self->s.pos.trBase ); // Store the current phase value so we know how to start up where we left off. self->radius = ( level.time - self->s.pos.trTime ) / (float)self->s.pos.trDuration; } else { self->s.pos.trType = TR_SINE; // Set the time based on the saved phase value self->s.pos.trTime = level.time - self->s.pos.trDuration * self->radius; // Always make sure we are starting with a fresh base VectorCopy( self->s.origin, self->s.pos.trBase ); } } /*QUAKED func_bobbing (0 .5 .8) ? X_AXIS Y_AXIS START_OFF x x x PLAYER_USE INACTIVE PLAYER_USE Player can use it with the use button INACTIVE must be used by a target_activate before it can be used Normally bobs on the Z axis "model2" .md3 model to also draw "modelAngles" md3 model's angles (in addition to any rotation on the part of the brush entity itself) "height" amplitude of bob (32 default) "speed" seconds to complete a bob cycle (4 default) "phase" the 0.0 to 1.0 offset in the cycle to start at "dmg" damage to inflict when blocked (2 default) "color" constantLight color "light" constantLight radius "targetname" turns on/off when used */ void SP_func_bobbing (gentity_t *ent) { float height; float phase; G_SpawnFloat( "speed", "4", &ent->speed ); G_SpawnFloat( "height", "32", &height ); G_SpawnInt( "dmg", "2", &ent->damage ); G_SpawnFloat( "phase", "0", &phase ); gi.SetBrushModel( ent, ent->model ); InitMover( ent ); VectorCopy( ent->s.origin, ent->s.pos.trBase ); VectorCopy( ent->s.origin, ent->currentOrigin ); // set the axis of bobbing if ( ent->spawnflags & 1 ) { ent->s.pos.trDelta[0] = height; } else if ( ent->spawnflags & 2 ) { ent->s.pos.trDelta[1] = height; } else { ent->s.pos.trDelta[2] = height; } ent->s.pos.trDuration = ent->speed * 1000; ent->s.pos.trTime = ent->s.pos.trDuration * phase; if ( ent->spawnflags & 4 ) // start_off { ent->s.pos.trType = TR_INTERPOLATE; // Now use the phase to calculate where it should be at the start. ent->radius = phase; phase = (float)sin( phase * M_PI * 2 ); VectorMA( ent->s.pos.trBase, phase, ent->s.pos.trDelta, ent->s.pos.trBase ); if ( ent->targetname ) { ent->e_UseFunc = useF_func_bobbing_use; } } else { ent->s.pos.trType = TR_SINE; } } /* =============================================================================== PENDULUM =============================================================================== */ /*QUAKED func_pendulum (0 .5 .8) ? x x x x x x PLAYER_USE INACTIVE PLAYER_USE Player can use it with the use button INACTIVE must be used by a target_activate before it can be used You need to have an origin brush as part of this entity. Pendulums always swing north / south on unrotated models. Add an angles field to the model to allow rotation in other directions. Pendulum frequency is a physical constant based on the length of the beam and gravity. "model2" .md3 model to also draw "modelAngles" md3 model's angles (in addition to any rotation on the part of the brush entity itself) "speed" the number of degrees each way the pendulum swings, (30 default) "phase" the 0.0 to 1.0 offset in the cycle to start at "dmg" damage to inflict when blocked (2 default) "color" constantLight color "light" constantLight radius */ void SP_func_pendulum(gentity_t *ent) { float freq; float length; float phase; float speed; G_SpawnFloat( "speed", "30", &speed ); G_SpawnInt( "dmg", "2", &ent->damage ); G_SpawnFloat( "phase", "0", &phase ); gi.SetBrushModel( ent, ent->model ); // find pendulum length length = fabs( ent->mins[2] ); if ( length < 8 ) { length = 8; } freq = 1 / ( M_PI * 2 ) * sqrt( g_gravity->value / ( 3 * length ) ); ent->s.pos.trDuration = ( 1000 / freq ); InitMover( ent ); VectorCopy( ent->s.origin, ent->s.pos.trBase ); VectorCopy( ent->s.origin, ent->currentOrigin ); VectorCopy( ent->s.angles, ent->s.apos.trBase ); ent->s.apos.trDuration = 1000 / freq; ent->s.apos.trTime = ent->s.apos.trDuration * phase; ent->s.apos.trType = TR_SINE; ent->s.apos.trDelta[2] = speed; } /* =============================================================================== WALL =============================================================================== */ //static -slc void use_wall( gentity_t *ent, gentity_t *other, gentity_t *activator ) { G_ActivateBehavior(ent,BSET_USE); // Not there so make it there //if (!(ent->contents & CONTENTS_SOLID)) if (!ent->count) // off { ent->svFlags &= ~SVF_NOCLIENT; ent->s.eFlags &= ~EF_NODRAW; ent->count = 1; //NOTE: reset the brush model because we need to get *all* the contents back //ent->contents |= CONTENTS_SOLID; gi.SetBrushModel( ent, ent->model ); if ( !(ent->spawnflags&1) ) {//START_OFF doesn't effect area portals gi.AdjustAreaPortalState( ent, qfalse ); } } // Make it go away else { //NOTE: MUST do this BEFORE clearing contents, or you may not open the area portal!!! if ( !(ent->spawnflags&1) ) {//START_OFF doesn't effect area portals gi.AdjustAreaPortalState( ent, qtrue ); } ent->contents = 0; ent->svFlags |= SVF_NOCLIENT; ent->s.eFlags |= EF_NODRAW; ent->count = 0; // off } } #define FUNC_WALL_OFF 1 #define FUNC_WALL_ANIM 2 /*QUAKED func_wall (0 .5 .8) ? START_OFF AUTOANIMATE x x x x PLAYER_USE INACTIVE PLAYER_USE Player can use it with the use button INACTIVE must be used by a target_activate before it can be used A bmodel that just sits there, doing nothing. Can be used for conditional walls and models. "model2" .md3 model to also draw "modelAngles" md3 model's angles (in addition to any rotation on the part of the brush entity itself) "color" constantLight color "light" constantLight radius START_OFF - the wall will not be there AUTOANIMATE - if a model is used it will animate */ void SP_func_wall( gentity_t *ent ) { gi.SetBrushModel( ent, ent->model ); VectorCopy( ent->s.origin, ent->pos1 ); VectorCopy( ent->s.origin, ent->pos2 ); InitMover( ent ); VectorCopy( ent->s.origin, ent->s.pos.trBase ); VectorCopy( ent->s.origin, ent->currentOrigin ); // count is used as an on/off switch (start it on) ent->count = 1; // it must be START_OFF if (ent->spawnflags & FUNC_WALL_OFF) { ent->spawnContents = ent->contents; ent->contents = 0; ent->svFlags |= SVF_NOCLIENT; ent->s.eFlags |= EF_NODRAW; // turn it off ent->count = 0; } if (!(ent->spawnflags & FUNC_WALL_ANIM)) { ent->s.eFlags |= EF_ANIM_ALLFAST; } ent->e_UseFunc = useF_use_wall; gi.linkentity (ent); } void security_panel_use( gentity_t *self, gentity_t *other, gentity_t *activator ) { if ( !activator ) { return; } if ( INV_SecurityKeyCheck( activator, self->message ) ) {//congrats! gi.SendServerCommand( NULL, "cp @SP_INGAME_SECURITY_KEY_UNLOCKEDDOOR" ); //use targets G_UseTargets( self, activator ); //take key INV_SecurityKeyTake( activator, self->message ); if ( activator->ghoul2.size() ) { gi.G2API_SetSurfaceOnOff( &activator->ghoul2[activator->playerModel], "l_arm_key", 0x00000002 ); } //FIXME: maybe set frame on me to have key sticking out? //self->s.frame = 1; //play sound G_Sound( self, self->soundPos2 ); //unusable self->e_UseFunc = useF_NULL; } else {//failure sound/display if ( activator->message ) {//have a key, just the wrong one gi.SendServerCommand( NULL, "cp @SP_INGAME_INCORRECT_KEY" ); } else {//don't have a key at all gi.SendServerCommand( NULL, "cp @SP_INGAME_NEED_SECURITY_KEY" ); } G_UseTargets2( self, activator, self->target2 ); //FIXME: change display? Maybe shader animmap change? //play sound G_Sound( self, self->soundPos1 ); } } /*QUAKED misc_security_panel (0 .5 .8) (-8 -8 -8) (8 8 8) x x x x x x x INACTIVE model="models/map_objects/kejim/sec_panel.md3" A model that just sits there and opens when a player uses it and has right key INACTIVE - Start off, has to be activated to be usable "message" name of the key player must have "target" thing to use when successfully opened "target2" thing to use when player uses the panel without the key */ void SP_misc_security_panel ( gentity_t *self ) { self->s.modelindex = G_ModelIndex( "models/map_objects/kejim/sec_panel.md3" ); self->soundPos1 = G_SoundIndex( "sound/movers/sec_panel_fail.mp3" ); self->soundPos2 = G_SoundIndex( "sound/movers/sec_panel_pass.mp3" ); G_SetOrigin( self, self->s.origin ); G_SetAngles( self, self->s.angles ); VectorSet( self->mins, -8, -8, -8 ); VectorSet( self->maxs, 8, 8, 8 ); self->contents = CONTENTS_SOLID; gi.linkentity( self ); //NOTE: self->message is the key self->svFlags |= SVF_PLAYER_USABLE; if(self->spawnflags & 128) { self->svFlags |= SVF_INACTIVE; } self->e_UseFunc = useF_security_panel_use; }