It now takes the function name to print in error message (passed on to
PR_Sprintf) and the argument number of the format string. The variable
arguments (in ...) are assumed to be immediately after the format
argument.
This is actually an old bug in qwaq that was masked by v6p progs
parameter passing: it was just luck that event got put in the correct
parameter and not trampled until the responder saw it. Ruamoko progs,
however, simply lost the event entirely because it never got explicitly
passed by the listener implementation.
This was easy to achieve in v6p progs because all return values passed
through .return and thus could not be lost. However, Ruamoko progs use a
return pointer which can wind up pointed into the void (the return
buffer) and thus cause the return value to be lost. Using @return on
obj_msg_sendv bounces the return pointer through to the called function.
In addition, nil is returned when the forwarding target is nil.
This is achieved by marking a void function with the void_return
attribute and then calling that function in an @return expression.
@return can be used only inside a void function and only with void
functions marked with the void_return attribute. As this is intended for
Objective-QC message forwarding, it is deliberately "difficult" to use
as returning a larger than expected value is unlikely to end well for
the calling function.
However, as a convenience, "@return nil" is allowed (in a void
function). It always returns an integer (which, of course,can be
interpreted as a pointer). This is safe because if the return value is
ignored, it will go into the progs return buffer, and if it is not
ignored, it is the smallest value that can be returned.
Having to remember to copy yet another specifier bit was getting
tedious, so use a union of a struct with the bitfields and an unsigned
int to access them in parallel. Makes for a tidier spec_merge, and one
less headache.
This loads the current return pointer into the specified register. No
offset is used (should make that an error, but for now any offset is
simply ignored). This is part of the fix for getting obj_msg_sendv to
work with return values.
With the return buffer in progs_t, it could not be addressed by the
progs on 64-bit machines (this was intentional, actually), but in order
to get obj_msg_sendv working properly, I needed a way to "bounce" the
return address of a calling function to the called function. The
cleanest solution I could think of was to add a mode to the with
instruction allowing the return pointer to be loaded into a register and
then calling the function with a 0 offset for the return value but using
the relevant register (next few commits). Testing promptly segfaulted
due to the 64-bit offset not fitting into a 32-bit value.
This gets message forwarding apparently working, though something isn't
quite right as qwaq-app doesn't update properly when I try to step
through the program, but that could be an error elsewhere.
The plan is to use the types to extract the number of parameters for a
selector when it is necessary to know the count. However, it'll probably
become useful for something else alter (these things seem to always do
so).
This takes care of the problems with PR_RESET_PARAMS (which has recently
become just a wrapper for PR_SetupParams) changing the stack and causing
PR_CallFunction to save the wrong stack pointer. Message forwarding is
currently broken for Ruamoko ISA progs, but that is due to not having a
valid pr_argc. However, I do have a plan involving extracting the
parameter count from the selector, but that's something for a later
commit. Everything else seems to be ok (my little game is working
nicely).
When doing the builtin params data change, I had somehow switch
multicast's number from 82 to 81. Fortunately, another builtin is also
81, so the VM told me off when I tried to run qw-server :)
rua_obj was skipped because that looks to be a bit more work and should
be a separate commit.
This is to avoid the stack getting mangled when calling progs functions
with parameters.
I suppose having one builtin call another was a neat idea at the time,
and really could have been fixed by simply wrapping the calls with
push/pop frame, but this is probably faster.
obj_msg_sendv needs to push the parameters onto the stack for Ruamoko
progs, but this causes problems because PR_CallFunction winds up
recording the wrong stack pointer for progs functions, and nothing
restores the stack for builtins. The handling is basically the same as
for the return pointer.
It's a bit disconcerting seeing a builtin in the top 10 when builtins
are counted by call while progs functions are counted by instruction.
Also, show the total profile after the function top-10 list.
pr_argc cannot be used in Ruamoko progs because nothing sets it. This
fixes the parse errors and resulting segfault when trying to parse the
Vulkan pipeline config.
The command line option works the same way as
--advanced/traditional/extended, as does the pragma. As well, raumoko
(alternative spelling) can be used because both are legitimate and some
people may prefer one spelling over the other.
As always, use of the pragma is at one's own risk: its intended use is
forcing the target in the unit tests.
dvec4, lvec4 and ulvec4 need to be aligned to 8 words (32 bytes) in
order to avoid hardware exceptions. Rather than dealing with possibly
mixed alignment when a function has 8-word aligned locals but only
4-word aligned parameters, simply keep the stack frame 8-word aligned at
all times.
As for sizes, the temp def recycler was written before the Ruamoko ISA
was even a pipe dream and thus never expected temp def sizes over 4. At
least now any future adjustments can be done in one place.
My quick and dirty test program works :)
dvec4 xy = {1d, 2d, 0d, 0.5};
void printf(string fmt, ...) = #0;
int main()
{
dvec4 u = {3, 4, 3.14};
dvec4 v = {3, 4, 0, 1};
dvec4 w = v * xy + u;
printf ("[%g, %g, %g, %g]\n", w[0], w[1], w[2], w[3]);
return 0;
}
They're now properly part of the type system and can be used for
declaring variables, initialized (using {} block initializers), operated
on (=, *, + tested) though much work needs to be done on binary
expressions, and indexed. So far, only ivec2 has been tested.
Commit 76b3bedb72 broke more than just the
swap test, but at least I know I need to get an edge in the dag.
Currently, the following code is generated: return and add are reversed.
../tools/qfcc/test/return-postop.r:8: return counter++;
0001 store.i counter, .tmp0
0002 return .tmp0
0003 add.i .tmp0, (1), counter
However, I don't want to deal with it right now, so it's marked XFAIL.
When possible, of course. However, this tightens up struct and constant
index array accesses, and avoids issues with flow analysis losing track
of the def (such trucking is something I want to do, but haven't decided
out to get the information out to the right statements).
Since address expressions always product a pointer type, aliasing one to
another pointer type is redundant. Instead, simply return an address
expression with the desired type.
The FIXME was there because I couldn't remember why the test was
type_compatible but the internal error complains about the types being
the same size. The compatibility check is to see if the op can be used
directly or whether a temp is required. The offset check is because
types that are the same size (which they must be if they are
compatible) is because it is not possible to create an offset alias def
that escapes the bounds of the real def, which any non-zero offset will
do if the types are the same size.
This is the intended purpose of the offset field in address expressions,
and will make struct and array accesses more efficient when I sort out
the code generation side.
Ruamoko passes va_list (@args) through the ... parameter (as such), but
IMP uses ... to defeat parameter type and count checking and doesn't
want va_list. While possibly not the best solution, adding a no_va_list
flag to function types and skipping ex_args entirely does take care of
the problem without hard-coding anything specific to IMP.
The system currently just sets some bits in the type specifier (the
attribute list should probably be carried around with the specifier),
but it gets the job done for now, and at least gets things started.
This makes it much easier to check (and more robust to name changes),
allowing for effectively killing the node to which the variable being
addressed is attached. This fixes the incorrect address being used for
va_list, which is what caused double-alias to fail.
In order to not waste instructions, the Ruamoko ISA does not provide 1
and 2 component 64-bit load/store instructions since they can be
implemented using 2 and 4 component 32-bit instructions (load and store
are independent of the interpretation of the data). This fixes the
double test, and technically the double-alias test, but it fails due to
a problem with the optimizer causing lea to use the wrong reference for
the address. It also breaks the quaternion test due to what seems to be
a type error that may have been lurking for a while, further
investigation is needed there.
Since the call instruction in the Ruamoko ISA specifies the destination
of the return value of the called function, it is much like any
expression type instruction in that the def referenced by its c operand
is both defined and killed by the instruction. However, unlike other
instructions, it really has many pseudo-operands: the arguments placed
on the stack. The problem is that when one of the arguments is also the
destination of the return value, the dags code wants to use the stack
argument as it was the last use of the real argument. Thus, instead of
using the value of the child node for the result, use the value label
attached to the call node (there should be only one such label).
This fixes iterfunc, typedef, zerolinker and vkgen when optimizing. Now
all but the double tests and return postop tests pass (and the retun
postop test is not related to the Ruamoko ISA, so fails either way).
That is, updating a variable using a function that takes the same
variable, probably very common in iterators, thus the name. It happens
to be the first qfcc test specific to Ruamoko. It's really just the
typedef, zerolinker, and vkgen type encoding loop stripped down for ease
of debugging.
Of course, it fails :)
