A lot is broken, especially direct input, but things are working. Better
yet, it seems the X11 and Windows key bindings are at least mostly
compatible.
The event handling changes take care of VagueLobster's segfaults on
startup for all renderers (vulkan will still be iffy depending on his
hardware: it dies on my GTX 965 M, probably due to memory and QF's
shadows). One nice side effect is it takes care of the broken CD audio
event handling (does anyone even care, though?).
They're not quite working (trail path offset is incorrect) but their
pixels are getting to the screen. Also, lifetimes are off for rocket
trails in that as soon as the entity dies, so does the trail.
Although the model subsystem does this too, it does it too late relative
to the video shutdown, resulting in segfaults for glsl due to the
drivers having been unloaded.
Although the model subsystem does this too, it does it too late relative
to the video shutdown, resulting in segfaults for glsl due to the
drivers having been unloaded.
This gets things *compiling* again, though it's still non-functional and
definitely wrong (don't want trail in renderer_t), but I need to think
about the design for getting trails as components. Also need to think
about integrating trails into the client effects system so trails can be
shared between renderers.
I think I had though it using a constructor init was ok, but it turns
out that was problematic. That, or I missed it in my recent audit. Fixes
a sys syserror during shutdown.
This fixes another segfault on shutdown (not sure just which recent
change caused it, but the listener pointer needed clearing) but while
fixing the listener issue, I noticed that binding and imt shutdown were
in the wrong order with respect to buttons and axes.
Reloading progs (or shutting down) needs to clean up the buttons
otherwise the input system will have issues when it cleans up because
the buttons and axes have ceased to exist.
It turns out that initializing them via constructors led to their
shutdowns happening too late which resulted in problems with button and
axis cleanup.
sincos is just a wrapper around the GNU libc sincos. sincosh is the
equivalent for sinh and cosh, but there doesn't seem to be any such
function, so it's just the two wrapped. They both return their results
in a vec2/vec2d as (sih[h], cos[h]).
VM side of the work needed for #58. Tests are still only 4-component,
but the geometric algebra tests seem to have 2-component covered at
least a little bit.
While it could be emulated using a 3d cross-product, it was a hack and
required the use of a swizzle (or alias) to extract the scalar value.
This will make 2d PGA a little nicer when I get to modifying qfcc for it
While the progs engine itself implements the instructions correctly, the
opcode specs (and thus qfcc) treated the results as 32-bit (which was,
really, a hidden fixme, it seems).
Using swizzle for some of the geometric product operations was a bit
clunky and has problems with alignment. While I will still need it in
the future, it turns out that the extend instruction almost did what I
needed. However, I'm unsure that reversing components within an extended
vector is the way to go.
By default. Conversion of quake strings needs to be requested (which is
done by nq and qw clients and servers, as well as qfprogs via an
option). I got tired of seeing mangled source code in the disassembly.
This gets only some very basics working:
* Algebra (multi-vector) types: eg @algebra(float(3,0,1)).
* Algebra scopes (using either the above or @algebra(TYPE_NAME) where
the above was used in a typedef.
* Basis blades (eg, e12) done via procedural symbols that evaluate to
suitable constants based on the basis group for the blade.
* Addition and subtraction of multi-vectors (only partially tested).
* Assignment of sub-algebra multi-vectors to full-algebra multi-vectors
(missing elements zeroed).
There's still much work to be done, but I thought it time to get
something into git.
I realized recently that I had made a huge mistake making Ruamoko's
based addressing use unsigned offsets as it makes stack-relative
addressing more awkward when it comes to runtime-determined stack frames
(eg, using alloca). This does put a bit of an extra limit on directly
addressable globals, but that's what the based addressing is meant to
help with anyway.
I'm not sure what's up, but arm gcc thinks the array isn't properly
initialized even though x86_64 gcc does. Maybe something with padding.
At least c23 makes it easy to 0-initialize VLAs.
I'm actually surprised anything worked, though I guess it was just the
one entry getting corrupted (and not 32, but I figured allocate slots
for all of the dynamic lights just in case). Or none, really, since
larger scenes (ie, those with multiple lights that fit in the same image
size) would result in not all the maps getting used and thus one spare
for dynamic lights.
This seems excessive, but gmsp3v2 map has 1399 lights. Worse, it has a
lot of different light sizes that go up by small increments (generally
around 10) resulting in 33 shadow map images (1 too many). Quantizing
the sizes to 32 drops this nicely to 20, and reduces memory consumption
slightly too (image buffer overhead, I guess).
While the gl renderer does (or did) have it's attempt at shadows, the
others don't even try, thus the onlyshadows-marked player model doesn't
work so well (looks rather goofy seeing the arms like that).
Having more than one copy of ShadowMatrices went against my plans, and I
had trouble finding the attachments set (light_attach.h wasn't such a
good idea).
This covers only the rendering of the shadow maps (actual use still
needs to be implemented). Working with orthographic projection matrices
is surprisingly difficult, partly because creating one includes the
translations needed to get the scene into the view (and depth range),
which means care needs to be taken with the view (camera) matrix in
order to avoid double-translating depending on just how the orthographic
matrix is set up (if it's set up to focus on the origin, then the camera
matrix will need translation, otherwise the camera matrix needs to avoid
translation).
I found it rather confusing that the matrices were all backwards, and
the existing comments about being "horizontal" didn't really help all
that much. After spending some time with maxima, I was able to verify
that the comments were indeed correct, just transposed (horizontal),
with the final composition reversed to reflect that transposition.
Updating directional light CSM matrices made me realize I needed to be
able to send the contents of a packet to multiple locations in a buffer
(I may need to extend it to multiple buffers). Seems to work, but I have
only the one directional light with which to test.
This improves the projection API in that near clip is a parameter rather
than being taken directly from the cvar, and a far clip (ie, finite far
plane) version is available (necessary for cascaded shadow maps as it's
rather hard to fit a box to an infinite frustum).
Also, the orthographic projection matrix is now reversed as per the
perspective matrix (and the code tidied up a little), and a version that
takes min and max vectors is available.
gcc didn't like a couple of the changes (rightly so: one was actually
incorrect), and the fix for qfcc I didn't think to suggest while working
with Emily.
The general CFLAGS etc fixes mostly required just getting the order of
operations right: check for attributes after setting the warnings flags,
though those needed some care for gcc as it began warning about main
wanting the const attribute.
Fixing the imui link errors required moving the ui functions and setup
to vulkan_lighting.c, which is really the only place they're used.
Fixing a load of issues related to autoconf and some small source-level issues to re-add clang support.
autoconf feature detection probably needs some addressing - partially as -Werror is applied late.
Lines are drawn for a light's leaf, the leafs visible to it, or those in
its efrags chain. Still no idea why lights are drawing when they
shouldn't. Deek suggest holes in the map, but I think if that was the
case, there'd be something visible. My suspicion is I'm doing something
wrong in with efrags.
This has resulted in some rather interesting information: it seems the
surfaces (and thus, presumably bounding boxes) for leafs have little to
do with the actual leaf node's volume.
I really don't know what I was thinking when I wrote that code. Maybe I
was trying for a half angle. Now the rendered "cone" matches up with a
hard-clipped cone light (soft edges stick out a bit).
I spent way too long tracking down the easy teleporter disappearing only
to realize it might be the watervised map. After moving it out of the
way and using id's maps, it works just fine.
This takes care of rockets and lava balls casting shadows when they
shouldn't (rockets more because the shadow doesn't look that nice, lava
balls because they glow and thus shouldn't cast shadows). Same for
flames, though the small torches lost their cool sconce shadows (need to
split up the model into flame and sconce parts and mark each
separately).
This clears up the shadow acne, but does cause problems with lights
inside models. However, this can be fixed by setting the models to not
cast shadows.
The use of a static set makes Mod_LeafPVS not thread safe and also means
that the set is not usable with the set iterators after going to a
smaller map from a larger map.
Dynamic lights can't go directly on visible entities as one or the other
will fail to be queued. In addition, the number of lights on an entity
needs to be limited. For now, one general purpose light for various
effects (eg, quad damage etc) and one for the muzzle flash.
This also fixes the segfault in the previous commit.
Dynamic light shadow sizes are fixed, but can be controlled via the
dynlight_size cvar (defaults to 250).
While the insertion of dlights into the BSP might wind up being overly
expensive, the automatic management of the component pool cleans up the
various loops in the renderers.
Unfortunately, (current bug) lights on entities cause the entity to
disappear due to how the entity queue system works, and the doubled
efrag chain causes crashes when changing maps, meaning lights should be
on their own entities, not additional components on entities with
visible models.
Also, the vulkan renderer segfaults on dlights (fix incoming, along with
shadows for dlights).
The reversed depth buffer is very nice, but it also reversed the OIT
blending. Too much demo watching not enough walking around in the maps
(especially start near the episode 4 gate).
Other than the rather bad shadow acne, this is actually quake itself
working nicely. Still need to get directional lights working for
community maps, and all sorts of other little things (hide view model,
show player, fix brush backfaces, etc).
This takes care of the type punning issue by each pass using the correct
sampler type with the correct view types bound. Also, point light and
spot light shadow maps are now guaranteed to be separated (it was just
luck that they were before) and spot light maps may be significantly
smaller as their cone angle is taken into account. Lighting is quite
borked, but at least the engine is running again.
I guess it's kind of UB, but it's handy for images that will be
conditionally written by the GPU but need to be in shader-read-only for
draw calls and the validation layers can't tell that the layers won't be
used.
This gets everything but the actual shadow map bindings working: the
validation layers don't like my type punning (which may well be the
right thing) and specialization constants don't help (yet, anyway) but I
want to get things into git.
Directional lights don't get correct matrices yet as I need to study the
math involved for cascaded shadow maps (and id maps don't have
directional lights).
Getting spotlights working correctly was insanely frustrating: I just
couldn't get the entities into the view of the spotlight with any
sensible combination of inverses and the z_up matrix. It turned out it
was all due to an incorrect reference vector: it was +Z instead of +X.
It turns out bsp faces are still back-face culled despite the null point
being on the front of every possible plane... or really, because it's on
the front of every possible plane: sometimes the back face is the front
face, and this breaks the face selection code (a separate traversal
function will be needed for non-culling rendering).
Despite that, other than having to deal with different pipelines,
getting the model renderers working went better than expected.
This involved rewriting the descriptor update code too, but that now
feels cleaner.
The matrices are loaded into a storage buffer as it can get quite big at
6 matrices per light (and the current max lights is 768).
The parameter will be passed on to the pipeline tasks in their task
context, allowing for communication between the subsystem calling
QFV_RunRenderPass and the pipeline tasks (for the case of lighting,
passing the current matrix base index).
They're now qfv_* and shared within the vulkan renderer. qfv_z_up cannot
be shared across renderers as they have their own ideas for the world
frame. qfv_box_rotations currently can't be shared across renderers
because if the Y-axis flip and the way it's handled, but sharing should
be achievable by modifying the other renderers to handle the sides
correctly (glsl and gl need to do lookups for the side enums, sw just
needs to be shown which way is up).
Using set iterators can be quite a lot faster for sparse sets due to the
function call overhead in testing each element. Times for ad_tears
dropped from about 1200us to about 670us (hard to say due to there being
only 3 data points and a lot of noise in the time).
If a step has process tasks, any render or compute
pipelines/renderpasses are **not** run automatically: the idea is the
process tasks need to run the relevant pipelines in a custom manner but
needs the objects to be created.
The recent light changes highlighted that the renderer does not own the
efrags (segfault in qwaq when shutting down my test scene). After
digging through the history of efrag clearing, it turns out that the
renderer never owned them, I just didn't understand the concept of
scenes at the time that I moved efrags into the renderer.
This makes a pretty significant difference: 8-25% for demo1, demo2,
demo3 and bigass1. Many thanks to Nick Alger
(https://stackoverflow.com/questions/5122228/box-to-sphere-collision).
It took me a moment to recognize that it's the Minkowski difference (and
maybe GJK?). Of course, I adapted it for simd.
This eliminates the O(N^2) (N = map leaf count) operation of finding
visible lights and will later allow for finer culling of the lights as
they can be tested against the leaf volume (which they currently are
not as this was just getting things going). However, this has severely
hurt ad_tears' performance (I suspect due to the extreme number of
leafs), but the speed seems to be very steady. Hopefully, reconstructing
the vis clusters will help (I imagine it will help in many places, not
just lights).
I guess I wasn't sure how to find all the allocated entities from within
the registry, but it turned out to be trivial. This takes care of leaked
static entities (and, in a later commit, leaked light entities, which is
how I found the problem).
The grid calculations are modified from those of Inigo Quilez
(https://iquilezles.org/articles/filterableprocedurals/), but give very
nice results: when thin enough, the lines fade out nicely instead of
producing crazy moire patterns. Though currently disabled, the default
planes are the xy, yz and zx planes with colored axes.
Based on the article
(https://developer.nvidia.com/content/depth-precision-visualized), this
should give nice precision behavior, and removes the need to worry about
large maps getting clipped. If I'm doing my math correctly, despite
being reversed, near precision is still crazy high. And (thanks to the
reversed depth) about a quarter of a unit (for near clip of 4) out at 1M
unit distance.
This seems to be more for legacy X11 (ie, without fixes etc), but
fullscreen really shouldn't affect grabbing directly (rather, it should
be up to the client whether grabbing (and thus warping) is enabled at
all.
con_linewidt starts out as 0, which leads to bad results for the initial
widths of input lines and later calculations. However, really, they
probably shouldn't be using size_t for the width, but this is a nice
quick fix.
Due to doing most of my testing using the demos, I hadn't noticed the
double-draw until flying around with the debug camera (and it showed as
a weird shimmer behind the sky layers).
Panels can be anchored to a widget in another hierarchy, allowing for
things like cascading menus. They can also be extended via referencing
them by name, allowing for subsystems to add items to an already panel
(eg, extending a menu).
This prevent the layout system from repositioning the text view and thus
breaking text-shaping. Now Tengwar Telcontar looks much more balanced in
the widgets.
The lights debug is from the light splat experiment (this is why I kept
the code), and the bsp debug is based on that. Both currently disabled
for now until I get UI controls in.
SCR_UpdateScreen_Legacy now takes only the screen functions pointer (it
didn't need camera or realtime), and the camera sizzle code has been
moved into one place to make cleaning it up easier (when I get around to
auditing AngleVectors etc).
Skipping the root view (widget) sort of made sense before windows became
separate canvases as there was only the one hierarchy, but doing so
prevented windows (panels) from fitting themselves to their children.
However, now I need to think of a good way of specifying a minimum size
for panels.
WIdgets can't possibly be active when the entire UI is hidden, and
resetting the active widget when hiding the UI helps when the state gets
broken due to widget id conflicts.
The intent is to use them for menus, tooltips and anything else along
those lines, but windows was a good starting point (and puts a border
along the top of the window too).
It's not perfect as the first N expanding children get grown by 1 pixel
regarless of weight, but it's much better than leaving a (possibly quite
large) gap at the edge of the layout.
I'm not sure this is what I want, especially in the long run, but it
does make simple windows much easier to create (and not look broken due
to being specified too small).
Canvas draw order is sorted by group then order within the group. As a
fallback, the canvas entity id is used to keep the sort stable, but
that's only as stable as the ids themselves (if the canvases are
destroyed and recreated, the ids may switch around).
This has use when the order of components in the pool affects draw order
(or has other significance), especially at the subpool level. I plan to
use it for fixing overlapping windows in imui.
Shaped text is cached using all the shaping parameters as well as the
text itself as a key. This makes text shaping a non-issue for imui when
the text is stable, taking my simple test from 120fps to 1000fps
(optimized build).
As I had long suspected, building large hierarchies is fiendishly
expensive (at least O(N^2)). However, this is because the hierarchies
are structured such that adding high-level nodes results in a lot of
copying due to the flattened (breadth-first) layout (which does make for
excellent breadth-first performance when working with a hierarchy).
Using tree mode allows adding new nodes to be O(1) (I guess O(N) for the
size of the sub-tree being added, but that's not supported yet) and
costs only an additional 8 bytes per node. Switching from flat mode to
tree mode is very cheap as only the additional tree-related indices need
to be fixed up (they're almost entirely ignored in flat mode). Switching
from tree to flat mode is a little more expensive as the entire tree
needs to be copied, but it seems to be an O(N) (size of the tree).
With this, building the style editor window went from about 25% to about
5% (and most of that is realloc!), with a 1.3% cost for switching from
tree mode to flat mode.
There's still a lot of work to do (supporting removal and tree inserts).
There's still the problem with unused variables when building for
windows because of vulkan debug stuff, but this fixes the important
errors. It actually still works (at least under wine).
By default, horizontal and vertical layouts expand to fill their parent
in their on-axis direction (horizontally for horizontal layouts), but
fit to their child views in their off-axis.
Flexible space views take advantage of auto-expansion, pushing sibling
views such that the grandparent view is filled on the parent view's
on-axis, and the parent view is filled by the space in the parent view's
off-axis. Flexible views currently have a background fill, allowing them
to provide background filling of the overall view with minimal overdraw
(ancestor views don't need to have any fill at all).
