Batching shadow map rendering needs be able to reference matrices for
multiple lights in a single batch, but the only input is the view index,
so use that to look up the matrix index rather than using it to index
the matrices directly (modulo the base index that's still there).
Since switching to the 1.2 api as a requirement, might as well use the
relevant structs instead of extension struct (for multiview). Came up
when double-checking the max views property due to running into what
appears to be an nvidia bug where > 29 views (any bit pattern) cause a
segfault when creating the pipeline.
I had missed that upping max lights to 2048 meant that up to 12288
matrices are needed for all the possible lights. This made it so the
light type could not be encoded in id_data, but the shaders never used
it anyway. This leaves one bit free.
While QFV_PacketScatterBuffer works on only one destination buffer, it
turns out it's still useful for scattering to multiple buffers, just
with multiple calls. This makes it pretty easy to combine multiple
buffer updates into a single staging buffer packet, resulting in
reducing lighting's packet use from up to 7 to just one, drastically
reducing the pressure on the stating buffer packet pool, and thus
reducing the chances of QFV_PacketAcquire stalling.
This relies on my fork of tracy: https://github.com/taniwha/tracy
on the wip-c-vulkan branch. Everything is still rather flaky though.
This necessitated the jump to vulkan 1.2 as a requirement.
This allows tracy to clean up properly. However, Sys_Quit will use the
jump buffer (sys_exit_jmpbuf) only if it has been set, so the use of
Sys_setjmp is optional.
I'm still not happy with it being a compile time constant, but this
takes care of the interlock between frames in flight... for now: it's
fragile and really needs the excessive small-packet use in draw and
lighting to be cleaned up.
After discussion with Darian, I've decided to go with one big staging
buffer (with lots of packets) shared between FiF as the large size will,
in the end, be more flexible.
Host_Error and Host_EndGame use setjmp/longjmp to implement an exception
of sorts, but this messes with tracy's state even with cleanup
attributes. However, it turns out that those cleanup attributes are
exactly how gcc implements C++ destructors, and so the standard Unwind
api (part of libgcc) respects them (so long as -fexceptions is enabled
for C). Thus... replace longjmp with an implementation that uses Unwind
to unwind the stack and call the cleanup functions as needed. This is
actually important for more than just tracy as the cleanup attributed
vars can be thread locks.
Tracy is a frame profiler: https://github.com/wolfpld/tracy
This uses Tracy's C API to instrument the code (already added in several
places). It turns out there is something very weird with the fence
behavior between the staging buffers and render commands as the
inter-frame delay occurs in a very strangle place (in the draw code's
packet acquisition rather than the fence waiter that's there for that
purpose). I suspect some tangled dependencies.
This fixes the weird slug when running nq on windows. It turns out it
was the "friendly neighbor" sleep code activating due to bitrot. In
addition, there are cvars for enabling unfocused sleep (defaults off)
and disabling minimized sleep (defaults on).
The event handling changes take care of VagueLobster's segfaults on
startup for all renderers (vulkan will still be iffy depending on his
hardware: it dies on my GTX 965 M, probably due to memory and QF's
shadows). One nice side effect is it takes care of the broken CD audio
event handling (does anyone even care, though?).
They're not quite working (trail path offset is incorrect) but their
pixels are getting to the screen. Also, lifetimes are off for rocket
trails in that as soon as the entity dies, so does the trail.
This gets things *compiling* again, though it's still non-functional and
definitely wrong (don't want trail in renderer_t), but I need to think
about the design for getting trails as components. Also need to think
about integrating trails into the client effects system so trails can be
shared between renderers.
I think I had though it using a constructor init was ok, but it turns
out that was problematic. That, or I missed it in my recent audit. Fixes
a sys syserror during shutdown.
This fixes another segfault on shutdown (not sure just which recent
change caused it, but the listener pointer needed clearing) but while
fixing the listener issue, I noticed that binding and imt shutdown were
in the wrong order with respect to buttons and axes.
It turns out that initializing them via constructors led to their
shutdowns happening too late which resulted in problems with button and
axis cleanup.
By default. Conversion of quake strings needs to be requested (which is
done by nq and qw clients and servers, as well as qfprogs via an
option). I got tired of seeing mangled source code in the disassembly.
This gets only some very basics working:
* Algebra (multi-vector) types: eg @algebra(float(3,0,1)).
* Algebra scopes (using either the above or @algebra(TYPE_NAME) where
the above was used in a typedef.
* Basis blades (eg, e12) done via procedural symbols that evaluate to
suitable constants based on the basis group for the blade.
* Addition and subtraction of multi-vectors (only partially tested).
* Assignment of sub-algebra multi-vectors to full-algebra multi-vectors
(missing elements zeroed).
There's still much work to be done, but I thought it time to get
something into git.
I realized recently that I had made a huge mistake making Ruamoko's
based addressing use unsigned offsets as it makes stack-relative
addressing more awkward when it comes to runtime-determined stack frames
(eg, using alloca). This does put a bit of an extra limit on directly
addressable globals, but that's what the based addressing is meant to
help with anyway.
This seems excessive, but gmsp3v2 map has 1399 lights. Worse, it has a
lot of different light sizes that go up by small increments (generally
around 10) resulting in 33 shadow map images (1 too many). Quantizing
the sizes to 32 drops this nicely to 20, and reduces memory consumption
slightly too (image buffer overhead, I guess).
This covers only the rendering of the shadow maps (actual use still
needs to be implemented). Working with orthographic projection matrices
is surprisingly difficult, partly because creating one includes the
translations needed to get the scene into the view (and depth range),
which means care needs to be taken with the view (camera) matrix in
order to avoid double-translating depending on just how the orthographic
matrix is set up (if it's set up to focus on the origin, then the camera
matrix will need translation, otherwise the camera matrix needs to avoid
translation).
Updating directional light CSM matrices made me realize I needed to be
able to send the contents of a packet to multiple locations in a buffer
(I may need to extend it to multiple buffers). Seems to work, but I have
only the one directional light with which to test.
This improves the projection API in that near clip is a parameter rather
than being taken directly from the cvar, and a far clip (ie, finite far
plane) version is available (necessary for cascaded shadow maps as it's
rather hard to fit a box to an infinite frustum).
Also, the orthographic projection matrix is now reversed as per the
perspective matrix (and the code tidied up a little), and a version that
takes min and max vectors is available.
gcc didn't like a couple of the changes (rightly so: one was actually
incorrect), and the fix for qfcc I didn't think to suggest while working
with Emily.
The general CFLAGS etc fixes mostly required just getting the order of
operations right: check for attributes after setting the warnings flags,
though those needed some care for gcc as it began warning about main
wanting the const attribute.
Fixing the imui link errors required moving the ui functions and setup
to vulkan_lighting.c, which is really the only place they're used.
Fixing a load of issues related to autoconf and some small source-level issues to re-add clang support.
autoconf feature detection probably needs some addressing - partially as -Werror is applied late.
This has resulted in some rather interesting information: it seems the
surfaces (and thus, presumably bounding boxes) for leafs have little to
do with the actual leaf node's volume.
This allows components to display themselves in the UI. Because the
component meta-data is copied into the registry, the function pointer
can be updated by systems (eg, the renderers) to display system-specific
interpretations of the component.
This takes care of rockets and lava balls casting shadows when they
shouldn't (rockets more because the shadow doesn't look that nice, lava
balls because they glow and thus shouldn't cast shadows). Same for
flames, though the small torches lost their cool sconce shadows (need to
split up the model into flame and sconce parts and mark each
separately).
The use of a static set makes Mod_LeafPVS not thread safe and also means
that the set is not usable with the set iterators after going to a
smaller map from a larger map.
Dynamic lights can't go directly on visible entities as one or the other
will fail to be queued. In addition, the number of lights on an entity
needs to be limited. For now, one general purpose light for various
effects (eg, quad damage etc) and one for the muzzle flash.
This also fixes the segfault in the previous commit.
Dynamic light shadow sizes are fixed, but can be controlled via the
dynlight_size cvar (defaults to 250).
While the insertion of dlights into the BSP might wind up being overly
expensive, the automatic management of the component pool cleans up the
various loops in the renderers.
Unfortunately, (current bug) lights on entities cause the entity to
disappear due to how the entity queue system works, and the doubled
efrag chain causes crashes when changing maps, meaning lights should be
on their own entities, not additional components on entities with
visible models.
Also, the vulkan renderer segfaults on dlights (fix incoming, along with
shadows for dlights).
This takes care of the type punning issue by each pass using the correct
sampler type with the correct view types bound. Also, point light and
spot light shadow maps are now guaranteed to be separated (it was just
luck that they were before) and spot light maps may be significantly
smaller as their cone angle is taken into account. Lighting is quite
borked, but at least the engine is running again.
I guess it's kind of UB, but it's handy for images that will be
conditionally written by the GPU but need to be in shader-read-only for
draw calls and the validation layers can't tell that the layers won't be
used.
This gets everything but the actual shadow map bindings working: the
validation layers don't like my type punning (which may well be the
right thing) and specialization constants don't help (yet, anyway) but I
want to get things into git.
It turns out bsp faces are still back-face culled despite the null point
being on the front of every possible plane... or really, because it's on
the front of every possible plane: sometimes the back face is the front
face, and this breaks the face selection code (a separate traversal
function will be needed for non-culling rendering).
Despite that, other than having to deal with different pipelines,
getting the model renderers working went better than expected.
This involved rewriting the descriptor update code too, but that now
feels cleaner.
The matrices are loaded into a storage buffer as it can get quite big at
6 matrices per light (and the current max lights is 768).
The parameter will be passed on to the pipeline tasks in their task
context, allowing for communication between the subsystem calling
QFV_RunRenderPass and the pipeline tasks (for the case of lighting,
passing the current matrix base index).
They're now qfv_* and shared within the vulkan renderer. qfv_z_up cannot
be shared across renderers as they have their own ideas for the world
frame. qfv_box_rotations currently can't be shared across renderers
because if the Y-axis flip and the way it's handled, but sharing should
be achievable by modifying the other renderers to handle the sides
correctly (glsl and gl need to do lookups for the side enums, sw just
needs to be shown which way is up).
This eliminates the O(N^2) (N = map leaf count) operation of finding
visible lights and will later allow for finer culling of the lights as
they can be tested against the leaf volume (which they currently are
not as this was just getting things going). However, this has severely
hurt ad_tears' performance (I suspect due to the extreme number of
leafs), but the speed seems to be very steady. Hopefully, reconstructing
the vis clusters will help (I imagine it will help in many places, not
just lights).
I guess I wasn't sure how to find all the allocated entities from within
the registry, but it turned out to be trivial. This takes care of leaked
static entities (and, in a later commit, leaked light entities, which is
how I found the problem).
The grid calculations are modified from those of Inigo Quilez
(https://iquilezles.org/articles/filterableprocedurals/), but give very
nice results: when thin enough, the lines fade out nicely instead of
producing crazy moire patterns. Though currently disabled, the default
planes are the xy, yz and zx planes with colored axes.
The idea is the UI system can call into the renderer without knowing
anything about the renderer, and the renderer can do what it pleases to
create UI elements in the correct context (passes as a parameter).
Panels can be anchored to a widget in another hierarchy, allowing for
things like cascading menus. They can also be extended via referencing
them by name, allowing for subsystems to add items to an already panel
(eg, extending a menu).
SCR_UpdateScreen_Legacy now takes only the screen functions pointer (it
didn't need camera or realtime), and the camera sizzle code has been
moved into one place to make cleaning it up easier (when I get around to
auditing AngleVectors etc).
The intent is to use them for menus, tooltips and anything else along
those lines, but windows was a good starting point (and puts a border
along the top of the window too).
Canvas draw order is sorted by group then order within the group. As a
fallback, the canvas entity id is used to keep the sort stable, but
that's only as stable as the ids themselves (if the canvases are
destroyed and recreated, the ids may switch around).
This has use when the order of components in the pool affects draw order
(or has other significance), especially at the subpool level. I plan to
use it for fixing overlapping windows in imui.
Shaped text is cached using all the shaping parameters as well as the
text itself as a key. This makes text shaping a non-issue for imui when
the text is stable, taking my simple test from 120fps to 1000fps
(optimized build).
As I had long suspected, building large hierarchies is fiendishly
expensive (at least O(N^2)). However, this is because the hierarchies
are structured such that adding high-level nodes results in a lot of
copying due to the flattened (breadth-first) layout (which does make for
excellent breadth-first performance when working with a hierarchy).
Using tree mode allows adding new nodes to be O(1) (I guess O(N) for the
size of the sub-tree being added, but that's not supported yet) and
costs only an additional 8 bytes per node. Switching from flat mode to
tree mode is very cheap as only the additional tree-related indices need
to be fixed up (they're almost entirely ignored in flat mode). Switching
from tree to flat mode is a little more expensive as the entire tree
needs to be copied, but it seems to be an O(N) (size of the tree).
With this, building the style editor window went from about 25% to about
5% (and most of that is realloc!), with a 1.3% cost for switching from
tree mode to flat mode.
There's still a lot of work to do (supporting removal and tree inserts).
By default, horizontal and vertical layouts expand to fill their parent
in their on-axis direction (horizontally for horizontal layouts), but
fit to their child views in their off-axis.
Flexible space views take advantage of auto-expansion, pushing sibling
views such that the grandparent view is filled on the parent view's
on-axis, and the parent view is filled by the space in the parent view's
off-axis. Flexible views currently have a background fill, allowing them
to provide background filling of the overall view with minimal overdraw
(ancestor views don't need to have any fill at all).
The biggest change was splitting up the job resources into
per-render-pass resources, allowing individual render passes to
reallocate their resources without affecting any others. After that, it
was just getting translucency and capture working after a window resize.
This takes care of element order stability. It did need reworking the
mouse tracking code (including adding an active flag to views), but now
buttons seem to work correctly.
TextContent seems redundant at this stage since a text view is always
sized to its content, and PercentOfParent doesn't work yet. Pixels
definitely works and Null seems to work in that it does no sizing or
positioning. Vertical layout is supported but not yet tested, similar
for ChildrenSum, but I can have two buttons side by side.
It does almost nothing (just puts a non-function button on the screen),
but it will help develop the IMUI code and, of course, come to help with
debugging in general.
Both passage and simple text are supported, but only simple text has
been tested at this stage. However, as passage text was taken directly
from rua_gui.c and formed the basis for simple text rendering, I expect
it's at least close to working.
The same underlying mechanism is used for both simple text strings and
passages, but without the intervening hierarchy of paragraphs etc.
Results in only the one view for a simple text string.
I'm not sure I like fontconfig (docs are...), but it is pretty standard,
and I was able to find some reasonable examples on stackexchange
(https://stackoverflow.com/questions/10542832/how-to-use-fontconfig-to-get-font-list-c-c).
Currently, only the one font is handled, no font sets for fall backs
etc. It's meant for the debug UI I'm working on, so that shouldn't be a
big deal.
It's usually desirable to hide the cursor when playing quake, but when
using the console, or in various other states, being able to see the
cursor can be quite important.
It's currently very simplistic (visible, not visible), but it gets
things started for making QF more usable in a windowed environment (not
having a visible cursor was fine in DOS, or when full screen, but not
when windowed (and not actively playing).
