This replaces old_console_t with con_buffer_t for managing scrollback,
and draw_charbuffer_t for actual character drawing, reducing the number
of calls into the renderer. There are numerous issues with placement and
sizing, but the basics are working nicely.
I really don't know why I tried to do ring-buffers without gaps, the
code complication is just not worth the tiny savings in memory. In fact,
just the switch from pointers to 32-bit offsets saves more memory than
not having gaps (on 64-bit systems, no change on 32-bit).
It handles basic cursor motion respecting \r \n \f and \t (might be a
problem for id chars), wraps at the right edge, and automatically
scrolls when the cursor tries to pass the bottom of the screen.
Clearing the buffer resets its cursor to the upper left.
This is intended for the built-in 8x8 bitmap characters and quake's
"conchars", but could potentially be used for any simple (non-composed
characters) mono-spaced font. Currently, the buffers can be created,
destroyed, cleared, scrolled vertically in either direction, and
rendered to the screen in a single blast.
One of the reasons for creating the buffer is to make it so scaling can
be supported in the sw renderer.
PR_Debug_ValueString prints the value at the given offset using the
provided type to format the string. The formatted string is appended to
the provided dstring.
PR_Debug_ValueString prints the value at the given offset using the
provided type to format the string. The formatted string is appended to
the provided dstring.
If no handler has been registered, then the corresponding parameter is
printed as a pointer but with surrounding brackets (eg, [0xfc48]). This
will allow the ruamoko runtime to implement object printing.
If no handler has been registered, then the corresponding parameter is
printed as a pointer but with surrounding brackets (eg, [0xfc48]). This
will allow the ruamoko runtime to implement object printing.
This means that QF should support more exotic fonts without any issue
(once the rest of the text handling system is up to snuff) as HarfBuzz
does all the hard work of handling OpenType, Graphite, etc text shaping,
including kerning (when enabled).
Also, font loading now loads all the glyphs into the atlas (preload is
gone).
While VRect_Difference worked for subrect allocation, it wasn't ideal as
it tended to produce a lot of long, narrow strips that were difficult to
reuse and thus wasted a lot of the super-rectangle's area. This is
because it always does horizontal splits first. However, rewriting
VRect_Difference didn't seem to be the best option.
VRect_SubRect (the new function) takes only width and height, and splits
the given rectangle such that if there are two off-cuts, they will be
both the minimum and maximum possible area. This does seem to make for
much better utilization of the available area. It's also faster as it
does only the two splits, rather than four.
It's implemented only in the Vulkan renderer, partly because there's a
lot of experimenting going on with it, but the glyphs do get transferred
to the GPU (checked in render doc). No rendering is done yet: still
thinking about whether to do a quick-and-dirty test, or to add HarfBuzz
immediately, and the design surrounding that.
The software renderer uses Bresenham's line slice algorithm as presented
by Michael Abrash in his Graphics Programming Black Book Special Edition
with the serial numbers filed off (as such, more just so *I* can read
the code easily), along with the Chen-Sutherland line clipping
algorithm. The other renderers were more or less trivial in comparison.
Most were pretty easy and fairly logical, but gib's regex was a bit of a
pain until I figured out the real problem was the conditional
assignments.
However, libs/gamecode/test/test-conv4 fails when optimizing due to gcc
using vcvttps2dq (which is nice, actually) for vector forms, but not the
single equivalent other times. I haven't decided what to do with the
test (I might abandon it as it does seem to be UD).
This gets ambient sounds (in particular, water and sky) working again
for quakeworld after the recent sound changes, and again for nq after I
don't know how long.
I never liked "cache" as a name because it said where the sound was
stored rather than how it was loaded/played, but "stream" is ok, since
that's pretty much spot on. I'm not sure "block" is the best, but it at
least makes sense because the sounds are loaded as a single block (as
opposed to being streamed). An now, neither use the cache system.
Nuclear powered audio ;)
More seriously, use _Atomic on a few fields that very obviously need it.
That is, channel's buffer pointer (used to signal to the mixer that the
channel is ready for use) and "flow control" flags (stop, done and
pause), and head and tail in the buffer itself. Since QF has been
working without _Atomic (admittedly, thanks to luck and x86's strong
memory model), this should do until proven otherwise. I imagine getting
stream reading out of the RT thread will highlight any issues.
Care needs to be taken when freeing channels as doing so while an
asynchronous mixer is using them is unlikely to end well. However,
whether the mixer is asynchronous depends on the output driver. This
lets the driver inform the rest of the system that the output and mixer
are running asynchronously.
This improves the locality of reference when mixing and removes the
proxy sfx for streamed sounds.
The buffer for streamed sounds is allocated when the stream is opened
(since streamed sounds can't share buffers), and freed when the stream
is closed.
For block sounds, the buffer is reference counted (with the sfx holding
one reference, so currently block buffers never get freed), with their
reference count getting incremented on open and decremented on close.
That the reference counts get to 1 has been confirmed, so all that
should be needed is proper destruction of the sfx instances.
Still need to sort out just why channels leak across level changes.
Getting the tag is possibly useful in general and definitely in
debugging. Setting, I'm not so sure as it should be done when allocated,
but that's not always possible.
Also, correct the return type of z_block_size, though it affected only
Z_Print. While an allocation larger than 4GB is... big for zone, the
blocks do support it, so printing should too.
And use it for Ruamoko object reference counts.
I need reference counts for dealing with block sound buffers since they
can be shared by many channels. I figured I take care of Ruamoko's
reference count location at the same time.
Fixes#27.
Sounds no longer use the cache, which is good for multi-threaded, but a
pain for memory management: the buffers are shared between channels that
play back the sounds, but when the sounds were cached, they were
automagically (thus problematically) freed when the space was needed.
That no longer happens, so they leak. I think the solution is to use
reference counting and retain/release in sfx->open() and sfx->close().
Streams are the easy one as they were never in the cache. As a side
effect, sfxstream_t is much smaller as it no longer has the buffer
embedded in the struct.
More shrinkage. It turned out the mixer uses the phase fields, so they
couldn't be removed, but even at 192kHz, +/- 127 samples produces
sufficient phase separation for a 21cm head (which is, actually, pretty
big: mine is about 15cm across), but that change can come later.
The ambient sound loading has been removed from snd_channels because 1)
it doesn't work for nq, 2) it should never have been there in the first
place (it belongs in the client, but that needs some more API).
This is part of a process to shrink channel_t so it doesn't waste locked
memory when it gets moved there. Eventually, only the fields the mixer
needs will be in channel_t itself: those needed for spacialization will
be moved into a separate array.
In the process, I found that channels leak across level changes, but
this appears to be due to the cached sounds being removed during loading
and the mixer never marking them as done (it sees the null sfx pointer
and assumes the channel was never in use). Having the mixer mark the
channel as done seems to fix the leak, but cause a free channel list
overflow. Rather than fight with that, I'll leave the leak for now and
fix it at its root cause: the management of the sound samples
themselves.
The scaling up of the volumes when setting a channel's volume bothered
me. The biggest issue being it hasn't been necessary for over a decade
since the conversion to a float-mixer. Now the volume and attenuation
scaling from protocol bytes is entirely in the client's hands.
sfx_t is now private, and cd_file no longer accesses channel_t's
internals. This is necessary for hiding the code needed to make mixing
and channel management *properly* lock-free (I've been getting away with
murder thanks to x86's strong memory model and just plain luck with
gcc).
And make Sys_MaskPrintf take the developer enum rather than just a raw
int.
It was actually getting some nasty hunk corruption errors when under
memory pressure that made it clear the sound system needs some work.
I always wanted it there, there were dependency issues at the time. I
guess they got cleaned up for the most part since then (other than
cd_file, but it's on my hit-list).
The texture animation data is compacted into a small struct for each
texture, resulting in much less data access when animating the texture.
More importantly, no looping over the list of frames. I plan on
migrating this to at least the other hardware renderers.
The models are broken up into N sub-(sub-)models, one for each texture,
but all faces using the same texture are drawn as an instance, making
for both reduced draw calls and reduced index buffer use (and thus,
hopefully, reduced bandwidth). While texture animations are broken, this
does mark a significant milestone towards implementing shadows as it
should now be possible to use multiple threads (with multiple index and
entid buffers) to render the depth buffers for all the lights.
This allows the use of an entity id to index into the entity data and
fetch the transform and colormod data in the vertex shader, thus making
instanced rendering possible. Non-world brush entities are still not
rendered, but the world entity is using both the entity data buffer and
entid buffer.
Sub-models and instance models need an instance data buffer, but this
gets the basics working (and the proof of concept). Using arrays like
this actually simplified a lot of the code, and will make it easy to get
transparency without turbulence (just another queue).
The gl water warp ones have been useless since very early on due to not
doing water warp in gl (vertex warping just didn't work well), and the
recent water warp implementation doesn't need those hacks. The rest of
the removed flags just aren't needed for anything. SURF_DRAWNOALPHA
might get renamed, but should be useful for translucent bsp surfaces
(eg, vines in ad_tears).
One more step towards BSP thread-safety. This one brought with it a very
noticeable speed boost (ie, not lost in the noise) thanks to the face
visframes being in tightly packed groups instead of 128 bytes apart,
though the sw render's boost is lost in the noise (but it's very
fill-rate limited).
This is next critical step to making BSP rendering thread-safe.
visframe was replaced with cluster (not used yet) in anticipation of BSP
cluster reconstruction (which will be necessary for dealing with large
maps like ad_tears).
The main goal was to get visframe out of mnode_t to make it thread-safe
(each thread can have its own visframe array), but moving the plane info
into mnode_t made for better data access patters when traversing the bsp
tree as the plane is right there with the child indices. Nicely, the
size of mnode_t is the same as before (64 bytes due to alignment), with
4 bytes wasted.
Performance-wise, there seems to be very little difference. Maybe
slightly slower.
The unfortunate thing about the change is the plane distance is negated,
possibly leading to some confusion, particularly since the box and
sphere culling functions were affected. However, this is so point-plane
distance calculations can be done with a single 4d dot product.
GCC does a nice enough job compiling the more readable form (though
admittedly, hadd is possibly more readable than what's there for
dot[fd], hadd is supposedly slower than the shuffles and adds, and qfvis
seems to support that).
This fixes the annoying persistence of inputs when respawning and
changing levels. Axis input clearing is hooked up but does nothing as of
yet. Active device input clearing has always been hooked up, but also
does nothing in the evdev and x11 drivers.
It was added only because FitzQuake used it in its pre-bsp2 large-map
support. That support has been hidden in bspfile.c for some time now.
This doesn't gain much other than having one less type to worry about.
Well tested on Conflagrant Rodent (the map that caused the need for
mclipnode_t in the first place).
This was one of the biggest reasons I had trouble understanding the bsp
display list code, but it turns out it was for dealing with GLES's
16-bit limit on vertex indices. Since vulkan uses 32-bit indices,
there's no need for the extra layer of indirection. I'm pretty sure it
was that lack of understanding that prevented me from removing it when I
first converted the glsl bsp code to vulkan (ie, that 16-bit indices
were the only reason for elements_t).
It's hard to tell whether the change makes much difference to
performance, though it seems it might (noisy stats even over 50 timedemo
loops) and the better data localization indicate it should at least be
just as good if not better. However, the reason for the change is
simplifying the data structures so I can make bsp rendering thread-safe
in preparation for rendering shadow maps.
This is a particularly ancient bug, sort of introduced by rhamph when he
optimized temp entity model handling and later exacerbated by me.
However, I suspect the actual problem is limited to nq as qw's gamedir
handling would have caused the models to be reloaded, but nq doesn't
ever change game directories once running.
They should probably be cause leafsurfaces since they are the actual
surfaces of the leaf: ie, the faces of the leaf mesh if each leaf was
sub-sub-model.
For now, at least (I have some ideas to possibly reduce the numbers and
also to avoid the need for actual limits). I've seen gmsp3v2 use over
500 lights at once (it has over 1300), and I spent too long figuring out
that weird light behavior was due to the limit being hit and lights
getting dropped (and even longer figuring out that more weird behavior
was due to the lack of shadows and the world being too bright in the
first place).
Since the staging buffer allocates the command buffers it uses, it
needs to free them when it is freed. I think I was confused by the
validation layers not complaining about unfreed buffers when shutting
down, but that's because destroying the pool (during program shutdown,
when the validation layers would complain) frees all the buffers. Thus,
due to staging buffers being created and destroyed during the level load
process, (rather large) command buffers were piling up like imps in a
Doom level.
In the process, it was necessary to rearrange some of the shutdown code
because vulkan_vid_render_shutdown destroys the shared command pool, but
the pool is required for freeing the command buffers, but there was a
minor mess of long-lived staging buffers being freed afterwards. That
didn't end particularly well.
While gcc was quite correct in its warning, all I needed was to
explicitly truncate the string. I don't remember why I didn't do that
back when I made the changes in 4f58429137, but it works now, and the
surrounding code does expect the string to be no more than 15 chars
long. This fixes yet another memory leak (but timedemo over multiple
runs still leaks like a sieve).
This is meant for a "permanent" tear-down before freeing the memory
holding the VM state or at program shutdown. As a consequence, builtin
sub-systems registering resources are now required to pass a "destroy"
function pointer that will be called just before the memory holding
those resources is freed by the VM resource manager (ie, the manager
owns the resource memory block, but each subsystem is responsible for
cleaning up any resources held within that block).
This even enhances thread-safety in rua_obj (there are some problems
with cmd, cvar, and gib).
This gives a rather significant speed boost to timedemo demo1: from
about 2300-2360fps up to 2520-2600fps, at least when using
multi-texture.
Since it was necessary for testing the scrap, gl got the ability to set
the console background texture, too.
It's down to 128 bytes from 184, which fits nicely in two cache lines.
This made a nice difference to glsl, unknown to vulkan (it crashed after
about 31/51 timedemo loops), and was a was for sw and gl.
While it takes one extra step to grab the marksurface pointer,
R_MarkLeaves and R_MarkLights (the two actual users) seem to be either
the same speed or fractionally faster (by a few microseconds). I imagine
the loss gone to the extra fetch is made up for by better bandwidth
while traversing the leafs array (mleaf_t now fits in a single cache
line, so leafs are cache-aligned since hunk allocations are aligned).
It copies an entire hierarchy (minus actual entities, but I'm as yet
unsure how to proceed with them), even across scenes as the source scene
is irrelevant and the destination scene is used for creating the new
transforms.
Brush models looked a little too tricky due to the very different style
of command queue, so that's left for now, but alias, iqm and sprite
entities are now labeled. The labels are made up of the lower 5 hex
digits of the entity address, the position, and colored by the
normalized position vector. Not sure that's the best choice as it does
mean the color changes as the entity moves, and can be quite subtle
between nearby entities, but it still helps identify the entities in the
command buffer.
And, as I suspected, I've got multiple draw calls for the one ogre. Now
to find out why.
The bones aren't animated yet (and I realized I made the mistake of
thinking the bone buffer was per-model when it's really per-instance (I
think this mistake is in the rest of QF, too)), skin rendering is a
mess, need to default vertex attributes that aren't in the model...
Still, it's quite satisfying seeing Mr Fixit on screen again :)
I wound up moving the pipeline spec in with the rest of the pipelines as
the system isn't really ready for separating them.
Abyss of Pandemonium uses global ambient light a lot, but doesn't
specify it in every map (nothing extracting entities and adding a
reasonable value can't fix). I imagine some further tweaking will be
needed.
The parsing of light data from maps is now in the client library, and
basic light management is in scene. Putting the light loading code into
the Vulkan renderer was a mistake I've wanted to correct for a while.
The client code still needs a bit of cleanup, but the basics are working
nicely.
This replaces *_NewMap with *_NewScene and adds SCR_NewScene to handle
loading a new map (for quake) in the renderer, and will eventually be
how any new scene is loaded.
This leaves only the one conditional in the shader code, that being the
distance check. It doesn't seem to make any noticeable difference to
performance, but other than explosion sprites being blue, lighting
quality seems to have improved. However, I really need to get shadows
working: marcher is just silly-bright without them, and light levels
changing as I move around is a bit disconcerting (but reasonable as
those lights' leaf nodes go in and out of visibility).
Id Software had pretty much nothing to do with the vulkan renderer (they
still get credit for code that's heavily based on the original quake
code, of course).
Just "loading" and "unloading" (both really just hints due to the
caching system), and an internal function for converting a handle to a
model pointer, but it let me test IQM loading and unloading in Vulkan.
The model system is rather clunky as it is focused around caching, so
unloading is more of a suggestion than anything, but it was good enough
for testing loading and unloading of IQM models in Vulkan.
Despite the base IQM specification not supporting blend-shapes, I think
IQM will become the basis for QF's generic model representation (at
least for the more advanced renderers). After my experience with .mu
models (KSP) and unity mesh objects (both normal and skinned), and
reviewing the IQM spec, it looks like with the addition of support for
blend-shapes, IQM is actually pretty good.
This is just the preliminary work to get standard IQM models loading in
vulkan (seems to work, along with unloading), and they very basics into
the renderer (most likely not working: not tested yet). The rest of the
renderer seems to be unaffected, though, which is good.
The resource subsystem creates buffers, images, buffer views and image
views in a single batch operation, using a single memory object to back
all the buffers and images. I had been doing this by hand for a while,
but got tired of jumping through all those vulkan hoops. While it's
still a little tedious to set up the arrays for QFV_CreateResource (and
they need to be kept around for QFV_DestroyResource), it really eases
calculation of memory object size and sub-resource offsets. And
destroying all the objects is just one call to QFV_DestroyResource.
I might need to do similar for other formats, but i ran into the problem
of the texture type being tex_palette instead of the expected tex_rgba
when pre-(no-)loading a tga image resulting in Vulkan not liking my
attempt at generating mipmaps.
Having to refigure out what values are going into the vectors got old
very fast. The comments don't help with verifying the values, but at
least I can tell at a glance where 2(xy - wz) goes and thus determine
the "orientation" of the matrix.
pr_type_t now contains only the one "value" field, and all the access
macros now use their PACKED variant for base access, making access to
larger types more consistent with the smaller types.
They're really redundant, and removing the next pointer makes for a
slightly smaller cvar struct. Cvar_Select was added to allow finding
lists of matching cvars.
The tab-completion and config saving code was reworked to use the hash
table DO functions. Comments removed since the code was completely
rewritten, but still many thanks to EvilTypeGuy and Fett.
Hash_Select returns a list of elements that match a given criterion
(select callback returning non-0).
Hash_ForEach simply calls a function for every element.
And use it for hud_scoreboard_gravity. Putting the enum def in view made
the most sense as view does own the base type and the enum is likely to
be by useful for other settings.
My script didn't know what type to make the cvars since they're not used
directly by the code, so they got treated as strings instead of ints or
floats.
This is an extremely extensive patch as it hits every cvar, and every
usage of the cvars. Cvars no longer store the value they control,
instead, they use a cexpr value object to reference the value and
specify the value's type (currently, a null type is used for strings).
Non-string cvars are passed through cexpr, allowing expressions in the
cvars' settings. Also, cvars have returned to an enhanced version of the
original (id quake) registration scheme.
As a minor benefit, relevant code having direct access to the
cvar-controlled variables is probably a slight optimization as it
removed a pointer dereference, and the variables can be located for data
locality.
The static cvar descriptors are made private as an additional safety
layer, though there's nothing stopping external modification via
Cvar_FindVar (which is needed for adding listeners).
While not used yet (partly due to working out the design), cvars can
have a validation function.
Registering a cvar allows a primary listener (and its data) to be
specified: it will always be called first when the cvar is modified. The
combination of proper listeners and direct access to the controlled
variable greatly simplifies the more complex cvar interactions as much
less null checking is required, and there's no need for one cvar's
callback to call another's.
nq-x11 is known to work at least well enough for the demos. More testing
will come.
The prefix gives more context to the error messages, making the system a
lot easier to use (it was especially helpful when getting my cvar revamp
into shape).
Based on the flags type used in vkparse (difference is the lack of
support for plists). Having this will make supporting named flags in
cvars much easier (though setting up the enum type is a bit of a chore).
This allows for easy (and safe) printing of cexpr values where the type
supports it. Types that don't support printing would be due to being too
complex or possibly write-only (eg, password strings, when strings are
supported directly).
This is progress towards #23. There are still some references to
host_time and host_client (via nq's server.h), and a lot of references
to sv and svs, but this is definitely a step in the right direction.
This allows a single render pass description to be used for both
on-screen and off-screen targets. While Vulkan does allow a VkRenderPass
to be used with any compatible frame buffer, and vkparse caches a
VkRenderPass created from the same description, this allows the same
description to be used for a compatible off-screen target without any
dependence on the swapchain. However, there is a problem in the caching
when it comes to targeting outputs with different formats.
This is progress towards #23. There are still some references to
host_time and host_client (via nq's server.h), and a lot of references
to sv and svs, but this is definitely a step in the right direction.
Really, this won't make all that much difference because alias models
with more than one skin are quite rare, and those with animated skin
groups are even rarer. However, for those models that do have more than
one skin, it will allow for reduced allocation overheads, and when
supported (glsl, vulkan, maybe gl), loading all the skins into an array
texture (since all skins are the same size, though external skins may
vary), but that's not implemented yet, this just wraps the old one skin
at a time code.
This allows a single render pass description to be used for both
on-screen and off-screen targets. While Vulkan does allow a VkRenderPass
to be used with any compatible frame buffer, and vkparse caches a
VkRenderPass created from the same description, this allows the same
description to be used for a compatible off-screen target without any
dependence on the swapchain. However, there is a problem in the caching
when it comes to targeting outputs with different formats.
This makes much more sense as they are intimately tied to the frame
buffer on which a render pass is working. Now, just the window width
and height are stored in vulkan_ctx_t. As a side benefit,
QFV_CreateSwapchain no long references viddef (now just palette and
conview in vulkan_draw.c to go).
While I have trouble imagining it making that much performance
difference going from 4 verts to 3 for a whopping 2 polygons, or even
from 2 triangles to 1 for each poly, using only indices for the vertices
does remove a lot of code, and better yet, some memory and buffer
allocations... always a good thing.
That said, I guess freeing up a GPU thread for something else could make
a difference.
I think I had gotten lucky with captures not being corrupt due to them
being much bigger than all but the L3 cache (and then they're over 1/2
the size), so the memory was being automatically invalidated by other
activity. Don't want to trust such luck, though.
This means that a tex_t object is passed in instead of just raw bytes
and width and height, but it means the texture can specify whether it's
flipped or uses BGR instead of RGB. This fixes the upside down
screenshots for vulkan.
This fixes (*ahem*) the vulkan renderer segfaulting when attempting to
take a screenshot. However, the image is upside down. Also, remote
snapshots and demo capture are broken for the moment.
QFS_NextFilename was renamed to QFS_NextFile to reflect the fact it now
returns a QFile pointer for the newly created file (as well as the
name). This necessitated updating WritePNG to take a file pointer
instead of a file name, with the advantage that WritePNGqfs is no longer
necessary and callers have much more control over the creation of the
file.
This makes QFS_NextFile much more secure against file system race
conditions and attacks (at least in theory). If nothing else, it will
make it more robust in a multi-threaded environment.
QF currently uses unique file names for screenshots and server-side
demos (and remote snapshots), but they're generally useful.
QFS_NextFilename has been filling this role, but it is highly insecure
in its current implementation. This is the first step to taking care of
that.
clang doesn't like the same variable name being used in nested
expression statements, so give the "safety" variables in reused macros
semi-meaningful (based on macro name) tails to keep them separate.
gcc and clang have rather different swizzle builtins, but both do a nice
job of optimizing the intuitive initializer swizzle (I think gcc 8(?)
didn't do such a good job thus my use of __builtin_shuffle).
Viewport and FOV updates are now separate so updating one doesn't cause
recalculations of the other. Also, perspective setup is now done
directly from the tangents of the half angles for fov_x and fov_y making
the renderers independent of fov/aspect mode. I imagine things are a bit
of a mess with view size changes, and especially screen size changes
(not supported yet anyway), and vulkan winds up updating its projection
matrices every frame, but everything that's expected to work does
(vulkan errors out for fisheye or warp due to frame buffer creation not
being supported yet).
Definitely not something for the renderer to care about directly (ie, at
most, a post-process filter setting or palette update, which is how it
actually is currently).
I meant to do this a while ago but forgot about it. Things are a bit of
a mess in that the renderer knows too much about entities, but
eventually the renderer will know about only things to render (meshes,
particles, etc).
The quake-specific enums are now in the client header, and the particle
system now has a gravity field rather than getting it from
vid_render_data (which I hope to eventually get rid of entirely).
r_refdef is really meant for holding the various screen "constants" for
the software renderer rather than the more generic scene stuff. All the
fields referenced by the low level rendering code (especially assembly)
have been moved to the beginning of the struct (and nicely fit within 64
bytes). The other fields should be moved elsewhere, but not this commit.
On top of that, R_ViewChanged is much easier to read, and there are
fewer static globals.
Of course, it's not as correct as glsl or sw due to using polygons and
uvs rather than a fragment shader (not that such is out of the question
since GL 3.0 is requested, but I don't feel like getting shaders going
just for a couple of post-processing effects in an obsolete renderer).
