The cvar setup for particles is a bit wonky in that the arrays get
initialized using the default max particle count but never updated.
Though things could be improved some more, this solution works (and has
been more or less copied to gl, but I couldn't reproduce the crash
there, or even the valgrind error).
The code dealing with state is a bit of a mess, but everything is
working nicely. Get around 400fps when all 6 faces need to be rendered
(no surprise: it should be about 1/6 of that for normal rendering). The
messy state handling code did not come as a surprise as I suspected
there were various mistakes in my scene rendering "recipe", and fisheye
highlighted them nicely (I'm sure getting this stuff working in Vulkan
will highlight even more issues).
Finally, after a decade :P Looks pretty good, too, and is (almost)
properly scaled to the resolution (almost because the effect is a little
squashed, but I think the sw renderer does the same).
The GLSL compiler requires any #version lines to be the first (real)
line of the program, even #line causes an error, so if the first line of
the chunk starts with #version, insert the #line directive as the second
line.
Other than the view model (undecided on the approach) this has
R_RenderView pretty much pulled out of the low level renderers. With
this, I'll be able to focus on scene handling for a bit then getting
shadows and fisheye working (again for fisheye).
r_screen isn't really the right place, but it gets the scene rendering
out of the low-level renderers and will make it easier to sort out
later, and hopefully easier to figure out a good design for vulkan.
The code is really part of scene (not a typo wrt r_screen: that is
misnamed as such, or at least SCR_UpdateScreen needs to be split into
screen (2d overlay, really) and scene updates).
This breaks fisheye rendering as the fisheye code calls the actual scene
render code multiple times, but the fisheye code is called by said scene
render code via a diversion. The fisheye needs to be moved out to the
high level scene render, but that will takes some extra work for frame
buffer setup.
Finally. I never liked it (felt bad adding it in the first place), and
it has caused confusion with function and global variable names, but it
did let me get the render plugins working.
This moves the common camera setup code out of the individual drivers,
and completely removes vup/vright/vpn from the non-software renderers.
This has highlighted the craziness around AngleVectors with it putting
+X forward, -Y right and +Z up. The main issue with this is it requires
a 90 degree pre-rotation about the Z axis to get the camera pointing in
the right direction, and that's for the native sw renderer (vulkan needs
a 90 degree pre-rotation about X, and gl and glsl need to invert an
axis, too), though at least it's just a matrix swizzle and vector
negation. However, it does mean the camera matrices can't be used
directly.
Also rename vpn to vfwd (still abbreviated, but fwd is much clearer in
meaning (to me, at least) than pn (plane normal, I guess, but which
way?)).
So far, in gl and glsl, but viewposition is much clearer than r_origin
(despite being the same thing), and modelorg is just confusing (I think
it's the view position relative to the current model).
GL still has its own functions for enabling and disabling fog while
rendering, but GLSL doesn't need such (thanks to the shaders), nor will
vulkan (and the software renderers don't support fog).
This is a step towards high-level unification of the renderers, as far
as possible keeping only actual low-level implementation details in the
individual renderers (some higher level stuff, eg shadows, is expected
to be per-renderer as some things are just not feasible to implement in
all renderers). However, the idea is to move the high-level
functionality into scene rendering.
Only CaptureBGR is per-renderer as the rest of the screenshot code uses
it to do the actual capture (which is target dependent). Vulkan is
currently broken due to capture being an asynchronous process and the
rest of the code expecting capture to be synchronous (also, bgr vs rgb).
The best thing is all renderers now write the same format (currently
png).
While there's currently only the one still, this will allow the entities
to be multiply queued for multi-pass rendering (eg, shadows). As the
avoidance of putting an entity in the same queue more than once relies
on the entity id, all entities now come from the scene (which is stored
in cl_world in the client code for nq and qw), thus the extensive
changes in the clients.
GL and GLSL were drawing the view model after particles instead of
before. For GL, this is likely due to avoiding fog affecting the view
model (which I think is not the right thing to do), and GLSL due to
copying GL (because I had no idea at the time). This makes the two
renderers consistent with the software renderers, and might even speed
things up a little as that's one less set of blends to do when the
particles are covered by the view model (I don't expect much
difference).
While I doubt the difference is all that significant, this should speed
up entity rendering because it cuts out a lot of branching, and
eliminates scanning the same list multiple times only to not do anything
for large chunks of the list.
The actual view and projection matrices are now consistent with vulkan,
with the vulkan-gl disparity moved into adjustment matrices. The goal is
to allow the same camera data and code to be used in all renderers. The
extra matrix multiplication shouldn't be too expensive as it occurs only
when the field of view (not often, under user control) or near and far
clip distances (very rarely) change.
This takes care of the global variables to a point (there is still the
global struct shared between the non-vulkan renderers), but it also
takes care of glsl's points-only rendering.
After yesterday's crazy marathon editing all the particles files, and
starting to do another big change to them today, I realized that I
really do need to merge them down. All the actual spawning is now in the
client library (though particle insertion will need to be moved). GLSL
particle rendering is semi-broken in that it now does only points (until
I come up with a way to select between points and quads (probably a
context object, which I need anyway for Vulkan)).
This has the advantage of getting entity_t out of the particle system,
and much easier to read math. Also, it served as a nice test for my
particle physics shaders (implemented the ideas in C). There's a lot of
code that needs merging down: all but the actual drawing can be merged.
There's some weirdness with color ramps, but I'll look into that later.
As the sw renderer's implementation was the closest to id's, it was used
as the model (thus a fair bit of cleanup is still needed). This fixes
some incorrect implementations in glsl and gl.
This is actually a better solution to the renderer directly accessing
client code than provided by 7e078c7f9c.
Essentially, V_RenderView should not have been calling R_RenderView, and
CL_UpdateScreen should have been calling V_RenderView directly. The
issue was that the renderers expected the world entity model to be valid
at all times. Now, R_RenderView checks the world entity model's validity
and immediately bails if it is not, and R_ClearState (which is called
whenever the client disconnects and thus no longer has a world to
render) clears the world entity model. Thus R_RenderView can (and is)
now called unconditionally from within the renderer, simplifying
renderer-specific variants.
Getting close to understanding (again) how it all works. I only just
barely understood when I got vulkan's renderer running, but I really
need to understand for when I modify things for shadows. The main thing
hurdle was tinst, but that was dealt with in the previous commit, and
now it's just sorting out the mess of elechains and elementss.
Its sole purpose was to pass the newly allocated instsurf when chaining
an instance model (ammo box, etc) surface, but using expresion
statements removes the need for such shenanigans, and even makes
msurface_t that little bit smaller (though a separate array would be
much better for cache coherence).
More importantly, the relevant code is actually easier to understand: I
spent way too long working out what tinst was for and why it was never
cleared.
The renderer's LineGraph now takes a height parameter, and netgraph now
uses cl_* cvars instead of r_* (which never really made sense),
including it's own height cvar (the render graphs still use
r_graphheight).
conwidth and conheight have been moved into vid.conview (probably change
the name at some time), and scr_vrect has been replaced by a view as
well. This makes it much easier to create 2d elements that follow the
screen size (taking advantage of a view's gravity) which will, in the
end, make changing the window size easier.
vid.aspect is removed (for now) as it was not really the right idea (I
really didn't know what I was doing at the time). Nicely, this *almost*
fixes the fov bug on fresh installs: the view is now properly
upside-down rather than just flipped vertically (ie, it's now rotated
180 degrees).
