This improves the locality of reference when mixing and removes the
proxy sfx for streamed sounds.
The buffer for streamed sounds is allocated when the stream is opened
(since streamed sounds can't share buffers), and freed when the stream
is closed.
For block sounds, the buffer is reference counted (with the sfx holding
one reference, so currently block buffers never get freed), with their
reference count getting incremented on open and decremented on close.
That the reference counts get to 1 has been confirmed, so all that
should be needed is proper destruction of the sfx instances.
Still need to sort out just why channels leak across level changes.
Getting the tag is possibly useful in general and definitely in
debugging. Setting, I'm not so sure as it should be done when allocated,
but that's not always possible.
Also, correct the return type of z_block_size, though it affected only
Z_Print. While an allocation larger than 4GB is... big for zone, the
blocks do support it, so printing should too.
And use it for Ruamoko object reference counts.
I need reference counts for dealing with block sound buffers since they
can be shared by many channels. I figured I take care of Ruamoko's
reference count location at the same time.
Fixes#27.
Sounds no longer use the cache, which is good for multi-threaded, but a
pain for memory management: the buffers are shared between channels that
play back the sounds, but when the sounds were cached, they were
automagically (thus problematically) freed when the space was needed.
That no longer happens, so they leak. I think the solution is to use
reference counting and retain/release in sfx->open() and sfx->close().
Streams are the easy one as they were never in the cache. As a side
effect, sfxstream_t is much smaller as it no longer has the buffer
embedded in the struct.
More shrinkage. It turned out the mixer uses the phase fields, so they
couldn't be removed, but even at 192kHz, +/- 127 samples produces
sufficient phase separation for a 21cm head (which is, actually, pretty
big: mine is about 15cm across), but that change can come later.
The ambient sound loading has been removed from snd_channels because 1)
it doesn't work for nq, 2) it should never have been there in the first
place (it belongs in the client, but that needs some more API).
This is part of a process to shrink channel_t so it doesn't waste locked
memory when it gets moved there. Eventually, only the fields the mixer
needs will be in channel_t itself: those needed for spacialization will
be moved into a separate array.
In the process, I found that channels leak across level changes, but
this appears to be due to the cached sounds being removed during loading
and the mixer never marking them as done (it sees the null sfx pointer
and assumes the channel was never in use). Having the mixer mark the
channel as done seems to fix the leak, but cause a free channel list
overflow. Rather than fight with that, I'll leave the leak for now and
fix it at its root cause: the management of the sound samples
themselves.
The scaling up of the volumes when setting a channel's volume bothered
me. The biggest issue being it hasn't been necessary for over a decade
since the conversion to a float-mixer. Now the volume and attenuation
scaling from protocol bytes is entirely in the client's hands.
sfx_t is now private, and cd_file no longer accesses channel_t's
internals. This is necessary for hiding the code needed to make mixing
and channel management *properly* lock-free (I've been getting away with
murder thanks to x86's strong memory model and just plain luck with
gcc).
And make Sys_MaskPrintf take the developer enum rather than just a raw
int.
It was actually getting some nasty hunk corruption errors when under
memory pressure that made it clear the sound system needs some work.
I always wanted it there, there were dependency issues at the time. I
guess they got cleaned up for the most part since then (other than
cd_file, but it's on my hit-list).
The texture animation data is compacted into a small struct for each
texture, resulting in much less data access when animating the texture.
More importantly, no looping over the list of frames. I plan on
migrating this to at least the other hardware renderers.
The models are broken up into N sub-(sub-)models, one for each texture,
but all faces using the same texture are drawn as an instance, making
for both reduced draw calls and reduced index buffer use (and thus,
hopefully, reduced bandwidth). While texture animations are broken, this
does mark a significant milestone towards implementing shadows as it
should now be possible to use multiple threads (with multiple index and
entid buffers) to render the depth buffers for all the lights.
This allows the use of an entity id to index into the entity data and
fetch the transform and colormod data in the vertex shader, thus making
instanced rendering possible. Non-world brush entities are still not
rendered, but the world entity is using both the entity data buffer and
entid buffer.
Sub-models and instance models need an instance data buffer, but this
gets the basics working (and the proof of concept). Using arrays like
this actually simplified a lot of the code, and will make it easy to get
transparency without turbulence (just another queue).
The gl water warp ones have been useless since very early on due to not
doing water warp in gl (vertex warping just didn't work well), and the
recent water warp implementation doesn't need those hacks. The rest of
the removed flags just aren't needed for anything. SURF_DRAWNOALPHA
might get renamed, but should be useful for translucent bsp surfaces
(eg, vines in ad_tears).
One more step towards BSP thread-safety. This one brought with it a very
noticeable speed boost (ie, not lost in the noise) thanks to the face
visframes being in tightly packed groups instead of 128 bytes apart,
though the sw render's boost is lost in the noise (but it's very
fill-rate limited).
This is next critical step to making BSP rendering thread-safe.
visframe was replaced with cluster (not used yet) in anticipation of BSP
cluster reconstruction (which will be necessary for dealing with large
maps like ad_tears).
The main goal was to get visframe out of mnode_t to make it thread-safe
(each thread can have its own visframe array), but moving the plane info
into mnode_t made for better data access patters when traversing the bsp
tree as the plane is right there with the child indices. Nicely, the
size of mnode_t is the same as before (64 bytes due to alignment), with
4 bytes wasted.
Performance-wise, there seems to be very little difference. Maybe
slightly slower.
The unfortunate thing about the change is the plane distance is negated,
possibly leading to some confusion, particularly since the box and
sphere culling functions were affected. However, this is so point-plane
distance calculations can be done with a single 4d dot product.
GCC does a nice enough job compiling the more readable form (though
admittedly, hadd is possibly more readable than what's there for
dot[fd], hadd is supposedly slower than the shuffles and adds, and qfvis
seems to support that).
This fixes the annoying persistence of inputs when respawning and
changing levels. Axis input clearing is hooked up but does nothing as of
yet. Active device input clearing has always been hooked up, but also
does nothing in the evdev and x11 drivers.
It was added only because FitzQuake used it in its pre-bsp2 large-map
support. That support has been hidden in bspfile.c for some time now.
This doesn't gain much other than having one less type to worry about.
Well tested on Conflagrant Rodent (the map that caused the need for
mclipnode_t in the first place).
This was one of the biggest reasons I had trouble understanding the bsp
display list code, but it turns out it was for dealing with GLES's
16-bit limit on vertex indices. Since vulkan uses 32-bit indices,
there's no need for the extra layer of indirection. I'm pretty sure it
was that lack of understanding that prevented me from removing it when I
first converted the glsl bsp code to vulkan (ie, that 16-bit indices
were the only reason for elements_t).
It's hard to tell whether the change makes much difference to
performance, though it seems it might (noisy stats even over 50 timedemo
loops) and the better data localization indicate it should at least be
just as good if not better. However, the reason for the change is
simplifying the data structures so I can make bsp rendering thread-safe
in preparation for rendering shadow maps.
This is a particularly ancient bug, sort of introduced by rhamph when he
optimized temp entity model handling and later exacerbated by me.
However, I suspect the actual problem is limited to nq as qw's gamedir
handling would have caused the models to be reloaded, but nq doesn't
ever change game directories once running.
They should probably be cause leafsurfaces since they are the actual
surfaces of the leaf: ie, the faces of the leaf mesh if each leaf was
sub-sub-model.
For now, at least (I have some ideas to possibly reduce the numbers and
also to avoid the need for actual limits). I've seen gmsp3v2 use over
500 lights at once (it has over 1300), and I spent too long figuring out
that weird light behavior was due to the limit being hit and lights
getting dropped (and even longer figuring out that more weird behavior
was due to the lack of shadows and the world being too bright in the
first place).
Since the staging buffer allocates the command buffers it uses, it
needs to free them when it is freed. I think I was confused by the
validation layers not complaining about unfreed buffers when shutting
down, but that's because destroying the pool (during program shutdown,
when the validation layers would complain) frees all the buffers. Thus,
due to staging buffers being created and destroyed during the level load
process, (rather large) command buffers were piling up like imps in a
Doom level.
In the process, it was necessary to rearrange some of the shutdown code
because vulkan_vid_render_shutdown destroys the shared command pool, but
the pool is required for freeing the command buffers, but there was a
minor mess of long-lived staging buffers being freed afterwards. That
didn't end particularly well.
While gcc was quite correct in its warning, all I needed was to
explicitly truncate the string. I don't remember why I didn't do that
back when I made the changes in 4f58429137, but it works now, and the
surrounding code does expect the string to be no more than 15 chars
long. This fixes yet another memory leak (but timedemo over multiple
runs still leaks like a sieve).
This is meant for a "permanent" tear-down before freeing the memory
holding the VM state or at program shutdown. As a consequence, builtin
sub-systems registering resources are now required to pass a "destroy"
function pointer that will be called just before the memory holding
those resources is freed by the VM resource manager (ie, the manager
owns the resource memory block, but each subsystem is responsible for
cleaning up any resources held within that block).
This even enhances thread-safety in rua_obj (there are some problems
with cmd, cvar, and gib).
This gives a rather significant speed boost to timedemo demo1: from
about 2300-2360fps up to 2520-2600fps, at least when using
multi-texture.
Since it was necessary for testing the scrap, gl got the ability to set
the console background texture, too.
It's down to 128 bytes from 184, which fits nicely in two cache lines.
This made a nice difference to glsl, unknown to vulkan (it crashed after
about 31/51 timedemo loops), and was a was for sw and gl.
While it takes one extra step to grab the marksurface pointer,
R_MarkLeaves and R_MarkLights (the two actual users) seem to be either
the same speed or fractionally faster (by a few microseconds). I imagine
the loss gone to the extra fetch is made up for by better bandwidth
while traversing the leafs array (mleaf_t now fits in a single cache
line, so leafs are cache-aligned since hunk allocations are aligned).
It copies an entire hierarchy (minus actual entities, but I'm as yet
unsure how to proceed with them), even across scenes as the source scene
is irrelevant and the destination scene is used for creating the new
transforms.
Brush models looked a little too tricky due to the very different style
of command queue, so that's left for now, but alias, iqm and sprite
entities are now labeled. The labels are made up of the lower 5 hex
digits of the entity address, the position, and colored by the
normalized position vector. Not sure that's the best choice as it does
mean the color changes as the entity moves, and can be quite subtle
between nearby entities, but it still helps identify the entities in the
command buffer.
And, as I suspected, I've got multiple draw calls for the one ogre. Now
to find out why.
The bones aren't animated yet (and I realized I made the mistake of
thinking the bone buffer was per-model when it's really per-instance (I
think this mistake is in the rest of QF, too)), skin rendering is a
mess, need to default vertex attributes that aren't in the model...
Still, it's quite satisfying seeing Mr Fixit on screen again :)
I wound up moving the pipeline spec in with the rest of the pipelines as
the system isn't really ready for separating them.
Abyss of Pandemonium uses global ambient light a lot, but doesn't
specify it in every map (nothing extracting entities and adding a
reasonable value can't fix). I imagine some further tweaking will be
needed.
The parsing of light data from maps is now in the client library, and
basic light management is in scene. Putting the light loading code into
the Vulkan renderer was a mistake I've wanted to correct for a while.
The client code still needs a bit of cleanup, but the basics are working
nicely.
This replaces *_NewMap with *_NewScene and adds SCR_NewScene to handle
loading a new map (for quake) in the renderer, and will eventually be
how any new scene is loaded.
This leaves only the one conditional in the shader code, that being the
distance check. It doesn't seem to make any noticeable difference to
performance, but other than explosion sprites being blue, lighting
quality seems to have improved. However, I really need to get shadows
working: marcher is just silly-bright without them, and light levels
changing as I move around is a bit disconcerting (but reasonable as
those lights' leaf nodes go in and out of visibility).
Id Software had pretty much nothing to do with the vulkan renderer (they
still get credit for code that's heavily based on the original quake
code, of course).
Just "loading" and "unloading" (both really just hints due to the
caching system), and an internal function for converting a handle to a
model pointer, but it let me test IQM loading and unloading in Vulkan.
The model system is rather clunky as it is focused around caching, so
unloading is more of a suggestion than anything, but it was good enough
for testing loading and unloading of IQM models in Vulkan.
Despite the base IQM specification not supporting blend-shapes, I think
IQM will become the basis for QF's generic model representation (at
least for the more advanced renderers). After my experience with .mu
models (KSP) and unity mesh objects (both normal and skinned), and
reviewing the IQM spec, it looks like with the addition of support for
blend-shapes, IQM is actually pretty good.
This is just the preliminary work to get standard IQM models loading in
vulkan (seems to work, along with unloading), and they very basics into
the renderer (most likely not working: not tested yet). The rest of the
renderer seems to be unaffected, though, which is good.
The resource subsystem creates buffers, images, buffer views and image
views in a single batch operation, using a single memory object to back
all the buffers and images. I had been doing this by hand for a while,
but got tired of jumping through all those vulkan hoops. While it's
still a little tedious to set up the arrays for QFV_CreateResource (and
they need to be kept around for QFV_DestroyResource), it really eases
calculation of memory object size and sub-resource offsets. And
destroying all the objects is just one call to QFV_DestroyResource.
I might need to do similar for other formats, but i ran into the problem
of the texture type being tex_palette instead of the expected tex_rgba
when pre-(no-)loading a tga image resulting in Vulkan not liking my
attempt at generating mipmaps.
Having to refigure out what values are going into the vectors got old
very fast. The comments don't help with verifying the values, but at
least I can tell at a glance where 2(xy - wz) goes and thus determine
the "orientation" of the matrix.
pr_type_t now contains only the one "value" field, and all the access
macros now use their PACKED variant for base access, making access to
larger types more consistent with the smaller types.
They're really redundant, and removing the next pointer makes for a
slightly smaller cvar struct. Cvar_Select was added to allow finding
lists of matching cvars.
The tab-completion and config saving code was reworked to use the hash
table DO functions. Comments removed since the code was completely
rewritten, but still many thanks to EvilTypeGuy and Fett.
Hash_Select returns a list of elements that match a given criterion
(select callback returning non-0).
Hash_ForEach simply calls a function for every element.
And use it for hud_scoreboard_gravity. Putting the enum def in view made
the most sense as view does own the base type and the enum is likely to
be by useful for other settings.
My script didn't know what type to make the cvars since they're not used
directly by the code, so they got treated as strings instead of ints or
floats.
This is an extremely extensive patch as it hits every cvar, and every
usage of the cvars. Cvars no longer store the value they control,
instead, they use a cexpr value object to reference the value and
specify the value's type (currently, a null type is used for strings).
Non-string cvars are passed through cexpr, allowing expressions in the
cvars' settings. Also, cvars have returned to an enhanced version of the
original (id quake) registration scheme.
As a minor benefit, relevant code having direct access to the
cvar-controlled variables is probably a slight optimization as it
removed a pointer dereference, and the variables can be located for data
locality.
The static cvar descriptors are made private as an additional safety
layer, though there's nothing stopping external modification via
Cvar_FindVar (which is needed for adding listeners).
While not used yet (partly due to working out the design), cvars can
have a validation function.
Registering a cvar allows a primary listener (and its data) to be
specified: it will always be called first when the cvar is modified. The
combination of proper listeners and direct access to the controlled
variable greatly simplifies the more complex cvar interactions as much
less null checking is required, and there's no need for one cvar's
callback to call another's.
nq-x11 is known to work at least well enough for the demos. More testing
will come.
The prefix gives more context to the error messages, making the system a
lot easier to use (it was especially helpful when getting my cvar revamp
into shape).
Based on the flags type used in vkparse (difference is the lack of
support for plists). Having this will make supporting named flags in
cvars much easier (though setting up the enum type is a bit of a chore).
This allows for easy (and safe) printing of cexpr values where the type
supports it. Types that don't support printing would be due to being too
complex or possibly write-only (eg, password strings, when strings are
supported directly).
This is progress towards #23. There are still some references to
host_time and host_client (via nq's server.h), and a lot of references
to sv and svs, but this is definitely a step in the right direction.
This allows a single render pass description to be used for both
on-screen and off-screen targets. While Vulkan does allow a VkRenderPass
to be used with any compatible frame buffer, and vkparse caches a
VkRenderPass created from the same description, this allows the same
description to be used for a compatible off-screen target without any
dependence on the swapchain. However, there is a problem in the caching
when it comes to targeting outputs with different formats.
This is progress towards #23. There are still some references to
host_time and host_client (via nq's server.h), and a lot of references
to sv and svs, but this is definitely a step in the right direction.
Really, this won't make all that much difference because alias models
with more than one skin are quite rare, and those with animated skin
groups are even rarer. However, for those models that do have more than
one skin, it will allow for reduced allocation overheads, and when
supported (glsl, vulkan, maybe gl), loading all the skins into an array
texture (since all skins are the same size, though external skins may
vary), but that's not implemented yet, this just wraps the old one skin
at a time code.
This allows a single render pass description to be used for both
on-screen and off-screen targets. While Vulkan does allow a VkRenderPass
to be used with any compatible frame buffer, and vkparse caches a
VkRenderPass created from the same description, this allows the same
description to be used for a compatible off-screen target without any
dependence on the swapchain. However, there is a problem in the caching
when it comes to targeting outputs with different formats.
This makes much more sense as they are intimately tied to the frame
buffer on which a render pass is working. Now, just the window width
and height are stored in vulkan_ctx_t. As a side benefit,
QFV_CreateSwapchain no long references viddef (now just palette and
conview in vulkan_draw.c to go).
While I have trouble imagining it making that much performance
difference going from 4 verts to 3 for a whopping 2 polygons, or even
from 2 triangles to 1 for each poly, using only indices for the vertices
does remove a lot of code, and better yet, some memory and buffer
allocations... always a good thing.
That said, I guess freeing up a GPU thread for something else could make
a difference.
I think I had gotten lucky with captures not being corrupt due to them
being much bigger than all but the L3 cache (and then they're over 1/2
the size), so the memory was being automatically invalidated by other
activity. Don't want to trust such luck, though.
This means that a tex_t object is passed in instead of just raw bytes
and width and height, but it means the texture can specify whether it's
flipped or uses BGR instead of RGB. This fixes the upside down
screenshots for vulkan.
This fixes (*ahem*) the vulkan renderer segfaulting when attempting to
take a screenshot. However, the image is upside down. Also, remote
snapshots and demo capture are broken for the moment.
QFS_NextFilename was renamed to QFS_NextFile to reflect the fact it now
returns a QFile pointer for the newly created file (as well as the
name). This necessitated updating WritePNG to take a file pointer
instead of a file name, with the advantage that WritePNGqfs is no longer
necessary and callers have much more control over the creation of the
file.
This makes QFS_NextFile much more secure against file system race
conditions and attacks (at least in theory). If nothing else, it will
make it more robust in a multi-threaded environment.
QF currently uses unique file names for screenshots and server-side
demos (and remote snapshots), but they're generally useful.
QFS_NextFilename has been filling this role, but it is highly insecure
in its current implementation. This is the first step to taking care of
that.
clang doesn't like the same variable name being used in nested
expression statements, so give the "safety" variables in reused macros
semi-meaningful (based on macro name) tails to keep them separate.
gcc and clang have rather different swizzle builtins, but both do a nice
job of optimizing the intuitive initializer swizzle (I think gcc 8(?)
didn't do such a good job thus my use of __builtin_shuffle).
Viewport and FOV updates are now separate so updating one doesn't cause
recalculations of the other. Also, perspective setup is now done
directly from the tangents of the half angles for fov_x and fov_y making
the renderers independent of fov/aspect mode. I imagine things are a bit
of a mess with view size changes, and especially screen size changes
(not supported yet anyway), and vulkan winds up updating its projection
matrices every frame, but everything that's expected to work does
(vulkan errors out for fisheye or warp due to frame buffer creation not
being supported yet).
Definitely not something for the renderer to care about directly (ie, at
most, a post-process filter setting or palette update, which is how it
actually is currently).
I meant to do this a while ago but forgot about it. Things are a bit of
a mess in that the renderer knows too much about entities, but
eventually the renderer will know about only things to render (meshes,
particles, etc).
The quake-specific enums are now in the client header, and the particle
system now has a gravity field rather than getting it from
vid_render_data (which I hope to eventually get rid of entirely).
r_refdef is really meant for holding the various screen "constants" for
the software renderer rather than the more generic scene stuff. All the
fields referenced by the low level rendering code (especially assembly)
have been moved to the beginning of the struct (and nicely fit within 64
bytes). The other fields should be moved elsewhere, but not this commit.
On top of that, R_ViewChanged is much easier to read, and there are
fewer static globals.
Of course, it's not as correct as glsl or sw due to using polygons and
uvs rather than a fragment shader (not that such is out of the question
since GL 3.0 is requested, but I don't feel like getting shaders going
just for a couple of post-processing effects in an obsolete renderer).
While it's not where I want it to be, it at least now no longer messes
with frame buffer binding or the view ports. This involved switching
around buffers in D_WarpScreen so that the main buffer could be bound
before post-processing.
The code dealing with state is a bit of a mess, but everything is
working nicely. Get around 400fps when all 6 faces need to be rendered
(no surprise: it should be about 1/6 of that for normal rendering). The
messy state handling code did not come as a surprise as I suspected
there were various mistakes in my scene rendering "recipe", and fisheye
highlighted them nicely (I'm sure getting this stuff working in Vulkan
will highlight even more issues).
Finally, after a decade :P Looks pretty good, too, and is (almost)
properly scaled to the resolution (almost because the effect is a little
squashed, but I think the sw renderer does the same).
Again, gl/vulkan not working yet (on the assumption that sw would be
trickier).
Fisheye overrides water warp because updating the projection map every
frame is far too expensive.
I've added a post-process pass to the interface in order to hide the
implementation details, but I'm not sure I'm happy about how the
multi-pass rendering for cube maps is handled (or having the frame
buffers as exposed as they are), but mainly because Vulkan will make
implementation interesting.
For now, OpenGL and Vulkan renderers are broken as I focused on getting
the software renderer working (which was quite tricky to get right).
This fixes a couple of issues: the segfault when warping the screen (due
to the scene rendering move invalidating the warp buffer), and warp
always having 320x200 resolution. There's still the problem of the
effect being too subtle at high resolution, but that's just a matter of
updating the tables and tweaking the code in D_WarpScreen.
Another issue is the Draw functions should probably write directly to
the main frame buffer or even one passed in as a parameter. This would
remove the need for binding the main buffer at the beginning and end of
the frame.
Its guts have been moved to D_Init temporarily while I work on the
frame buffer design. This is actually a big part of that work as it
moves most of the frame buffer creation into the one place, making it
easier to ensure I get all the sub-buffers and caches created.
I think the widespread use of recalc_refdef (and force_fullscreen) was
the result of a rushed merge of the renderer and video code (I do seem
to remember sprinkling them around). This cleans the two out of the
client code.
Other than the view model (undecided on the approach) this has
R_RenderView pretty much pulled out of the low level renderers. With
this, I'll be able to focus on scene handling for a bit then getting
shadows and fisheye working (again for fisheye).
r_screen isn't really the right place, but it gets the scene rendering
out of the low-level renderers and will make it easier to sort out
later, and hopefully easier to figure out a good design for vulkan.
The change to using separate per-model-type entity queues resulted in
the lighting vector used for alias and iqm models being in an ephemeral
location (in the shared setup_lighting function's stack frame). This
resulted in the model rendering code getting a garbage vector due to it
being overwritten by another stack frame. What I don't get is why the
garbage varied from run to run for the same demo (demo2, the first scrag
behind the start door showed the bad lighting nicely), which made
tracking down the offending commit (and thus the code) rather
troublesome, though once I found it, it was a bit of a face-palm moment.
Move r_pcurrentvertbase into the sw renderer, cleaning up gl's use of
(not really needed there). Not ready to move r_bsp into the main bin yet
as there are linking issues since only the low-level code references any
of its symbols.
While the scheme of using our own allocated did work just fine, fisheye
rendering uses glGenTextures which caused a texture id clash and thus
invalid operations (the cube map texture happened to be the same as the
console background texture). Sure, I could have just "fixed" the fisheye
init code, but this brings gl closer in line with glsl (which makes
extensive use of glGenTextures and glDeleteTextures). This doesn't fix
any texture leaks gl has (plenty, I imagine), but it's a step in the
right direction.
Finally. I never liked it (felt bad adding it in the first place), and
it has caused confusion with function and global variable names, but it
did let me get the render plugins working.
This moves the common camera setup code out of the individual drivers,
and completely removes vup/vright/vpn from the non-software renderers.
This has highlighted the craziness around AngleVectors with it putting
+X forward, -Y right and +Z up. The main issue with this is it requires
a 90 degree pre-rotation about the Z axis to get the camera pointing in
the right direction, and that's for the native sw renderer (vulkan needs
a 90 degree pre-rotation about X, and gl and glsl need to invert an
axis, too), though at least it's just a matrix swizzle and vector
negation. However, it does mean the camera matrices can't be used
directly.
Also rename vpn to vfwd (still abbreviated, but fwd is much clearer in
meaning (to me, at least) than pn (plane normal, I guess, but which
way?)).
I'd been considering it for a while, but in the end, all the issues it
presented made me decide it wasn't worth merging and was never really
worth keeping: it was a neat proof of concept but of little actual use,
especially now everyone either has an OK GPU or would want to stick to
8-bit rendering anyway (sorry L-Havoc).
However, both it and my merge work are preserved in git history :)
I got tired of having to maintain two separate software renderers, but
didn't want to just nuke sw32, so its core changes are merged into sw.
Alias model rendering is broken, but I know exactly what's wrong and how
to fix it, just need to take care due to asm.
So far, in gl and glsl, but viewposition is much clearer than r_origin
(despite being the same thing), and modelorg is just confusing (I think
it's the view position relative to the current model).
GL still has its own functions for enabling and disabling fog while
rendering, but GLSL doesn't need such (thanks to the shaders), nor will
vulkan (and the software renderers don't support fog).
This is a step towards high-level unification of the renderers, as far
as possible keeping only actual low-level implementation details in the
individual renderers (some higher level stuff, eg shadows, is expected
to be per-renderer as some things are just not feasible to implement in
all renderers). However, the idea is to move the high-level
functionality into scene rendering.
Only CaptureBGR is per-renderer as the rest of the screenshot code uses
it to do the actual capture (which is target dependent). Vulkan is
currently broken due to capture being an asynchronous process and the
rest of the code expecting capture to be synchronous (also, bgr vs rgb).
The best thing is all renderers now write the same format (currently
png).
While there's currently only the one still, this will allow the entities
to be multiply queued for multi-pass rendering (eg, shadows). As the
avoidance of putting an entity in the same queue more than once relies
on the entity id, all entities now come from the scene (which is stored
in cl_world in the client code for nq and qw), thus the extensive
changes in the clients.
The root transform of each hierarchy can be extracted from the first
transform of the list in the hierarchy, so no information is lost. The
main reason for the change is I discovered (obvious in hindsight) that
deleting root transforms was O(n) due to keeping them in an array, thus
the use of a linked list (I don't expect a hierarchy to be in more than
one such list), and I didn't want the transforms to be in a linked list.
While I doubt the difference is all that significant, this should speed
up entity rendering because it cuts out a lot of branching, and
eliminates scanning the same list multiple times only to not do anything
for large chunks of the list.
Since transforms now know the scene to which they belong, and they know
when they are root and when not, getting the transform code to manage
the scene roots is the best way to keep the list of root transforms
consistent.
It's a lot easier to read (and see the difference between modes 2 and 3)
with all the ifs removed, and the state is properly is chasestate_t now
(though not handled properly on level reset etc).
The more advanced modes are rather broken (continuous spinning), but
they may have been for a while. The bulk of the various changes were due
to renaming viewstate's origin and angles to make their meaning more
explicit.
They've been near-identical for years, now they're only one. It proved
necessary to start merging the HUD code which for now is just a few cvar
declarations (not even init), but that should be a separate set of
commits.
It holds the data for a basic 3d camera (transform, fov, near and far
clip). Not used yet as there is much work to be done in cleaning up the
client code.
Handling of view angles is a little hacky at the moment, but this gets
the chase camera code and most of the common input code into one place,
which will make cleaning up the camera code much easier.
Regardless of whether the sky is spinning or not, the matrix needs to be
updated with the current origin in order to get the direction vector
right in the shader. Also, it's in the update that the required x-y
plane rotation gets in so the skies move in the correct direction.
This actually has at least two benefits: the transform id is managed by
the scene and thus does not need separate management by the Ruamoko
wrapper functions, and better memory handling of the transform objects.
Another benefit that isn't realized yet is that this is a step towards
breaking the renderers free of quake and quakeworld: although the
clients don't actually use the scene yet, it will be a good place to
store the rendering information (functions to run, etc).
I've run into a bit of an issue with transform management (really, just
need to make them owned by the scene, but that means creating a scene
for quake and quakeworld).
This is the bulk of the work for recording the resource pointer with
with builtin data. I don't know how much of a difference it makes for
most things, but it's probably pretty big for qwaq-curses due to the
very high number of calls to the curses builtins.
Closes#26
It's not enforced a this stage, and it would be easy enough to handle,
but it turns out all the standard quake and quakeworld progs never used
... for the print functions: the behavior of PF_VarString was
undocumented and so... tough :P.
It now takes the function name to print in error message (passed on to
PR_Sprintf) and the argument number of the format string. The variable
arguments (in ...) are assumed to be immediately after the format
argument.
With the return buffer in progs_t, it could not be addressed by the
progs on 64-bit machines (this was intentional, actually), but in order
to get obj_msg_sendv working properly, I needed a way to "bounce" the
return address of a calling function to the called function. The
cleanest solution I could think of was to add a mode to the with
instruction allowing the return pointer to be loaded into a register and
then calling the function with a 0 offset for the return value but using
the relevant register (next few commits). Testing promptly segfaulted
due to the 64-bit offset not fitting into a 32-bit value.
The plan is to use the types to extract the number of parameters for a
selector when it is necessary to know the count. However, it'll probably
become useful for something else alter (these things seem to always do
so).
It's currently only 4 (or even 3 for v6) words, but this fixes false
positives when checking for null pointers in Ruamoko progs due to
pr_return pointing to the return buffer and thus outside the progs
memory map resulting in an impossible to exceed value.
Thanks to the size of the type encoding being explicit in the encoding,
anything that tries to read the encodings without expecting the width
will simply skip over the width, as it is placed after the ev type in
the encoding.
Any code that needs to read both the old encodings and the new can check
the size of the basic encodings to see if the width field is present.
I abandoned the reason for doing it (adding a pile of vector types), but
I liked the cleanup. All the implementations are hand-written still, but
at least the boilerplate stuff is automated.
This cleans up dprograms_t, making it easier to read and see what chunks
are in it (I was surprised to see only 6, the explicit pairs made it
seem to have more).
PR_SetupParams is new and sets up the parameter pointers so older code
that expects only up to 8 parameter will work with both v6p and Ruamoko
progs without having to check what progs are running. PR_SetupParams is
useful even when Ruamoko progs are expected as it reserves the required
space (respecting alignment) on the stack and returns a pointer to the
top (bottom? confusing) of the stack. PR_PushFrame and PR_PopFrame
need to be used around PR_SetupParams, regardless of using temp strings,
to avoid a stack leak (need to do an audit).
This is part of the work for #26 (Record resource pointer with builtin
function data). Currently, the data pointer gets as far as the
per-instance VM function table (I don't feel like tackling the job of
converting all the builtin functions tonight). All the builtin modules
that register a resources data block pass that block on to
PR_RegisterBuiltins.
The builtin and progs function data is overlaid so the extra data
doesn't cause too much memory to be used (it's actually 8 bytes smaller
now). The plan is to pre-compute the offsets based on the parameter
size and alignment data.
This will make it possible for the engine to set up their parameter
pointers when running Ruamoko progs. At this stage, it doesn't matter
*too* much, except for varargs functions, because no builtin yet takes
anything larger than a float quaternion, but it will be critical when
double or long vec3 and vec4 values are passed.
Just 32-bit rounding to next higher power of two, and base 2 logarithm.
Most importantly, they are suitable for use in initializers as they are
constant in, constant out.
I found the docs in PR_ExecuteProgram and PR_CallFunction to be a little
confusing, so making it explicit that PR_ExecuteProgram calls
PR_CallFunction and that PR_CallFunction should be called only in a
builtin seemed like a good idea.
And fix an incorrect definition for RETURN_QUAT.
Prefixed MAX_STACK_DEPTH and LOCALSTACK_SIZE (and LOCALSTACK_SIZE got an
extra _).
The rest is just edits to documentation comments.
Due to how OP_RETURN works, a destination is required for any function
returning data, but the caller may not have allocated any space for the
value. Thus the VM maintains a buffer into which the data can be put and
ignored. It also makes a good place for return values when the engine
calls Ruamoko code as trusting progs code with return sizes seems like a
recipe for disaster, especially if the return location is on the C
stack.
And provide a table for such for qfcc and the like. With this, using
pr_double_t (for example) in C will cause the double value to always be
8-byte aligned and thus structures shared between gcc and qfcc will be
consistent (with a little fuss to take care of the warts).
And other related fields so integer is now int (and uinteger is uint). I
really don't know why I went with integer in the first place, but this
will make using macros easier for dealing with types.
They are both gone, and pr_pointer_t is now pr_ptr_t (pointer may be a
little clearer than ptr, but ptr is consistent with things like intptr,
and keeps the type name short).
This required delaying the setting of the return pointer by call until
after the current pointer had been saved, and thus passing the desired
pointer into PR_CallFunction (which does have some advantages for C
functions calling progs functions, but some dangers too (should ensure a
128 byte (32 word) buffer when calling untrusted code (which is any,
really)).
This fixes the issue of the data stack not being restored properly
because the returning function needs to return a value from its local
variables (stored on the stack) and accessing stack data below the stack
pointer is a bad idea (sure, no interrupts yet, but who knows...).
I don't know why they were ever signed (oversight at id and just
propagated?). Anyway, this resulted in "unsigned" spreading a bit, but
all to reasonable places.
This has been a long-held wishlist item, really, and I thought I might
as well take the opportunity to add the instructions. The double
versions of STATE require both the nextthink field and time global to be
double (but they're not resolved properly yet: marked with
"FIXME double time" comments).
Also, the frame number for double time state is integer rather than
float.
While it doesn't cover the addressing modes, it does match the bit
pattern used in the Ruamoko instruction set. It will make selecting
branch instructions easier (especially for Ruamoko).
In some cases, gcc-11 does a good enough job translating normal looking
C expressions so use just those, but other times need to dig around for
an appropriate intrinsic.
Also, now need to disable psapi warnings when compiling for anything
less than avx.
And partial implementations in qfcc (most places will generate an
internal error (not implemented) or segfault, but some low-hanging fruit
has already been implemented).
As I expect to be tweaking things for a while, it's part of the build
process. This will make it a lot easier to adjust mnemonics and argument
formats (tweaking the old table was a pain when conventions changed).
It's not quite done as it still needs arg widths and types.
While working on the new opcode table, I decided a lot of the names were
not to my liking. Part of the problem was the earlier clash with the
v6p opcode names, but that has been resolved via the v6p tag.
