CC=gcc WINDRES=windres STRIP?=echo strip STRIPFLAGS=--strip-unneeded --remove-section=.comment CPUOPTIMIZATIONS= #canonicalize the source path. except emscripten warns about that like crazy. *sigh* ifeq ($(FTE_TARGET),web) BASE_DIR:=. else ifeq ($(FTE_TARGET),droid) BASE_DIR:=. else BASE_DIR:=$(realpath .) endif SVNREVISION:=-DSVNREVISION=$(shell test -d .svn && svnversion || echo -) WHOAMI:=$(shell whoami) #only limited forms of cross-making is supported #only the following 3 are supported #linux->win32 (FTE_TARGET=win32) RPM Package: "mingw32-gcc", DEB Package: "mingw32" #linux->linux32 (FTE_TARGET=linux32) #linux->linux64 (FTE_TARGET=linux64) #linux->morphos (FTE_TARGET=morphos) #linux->macosx (FTE_TARGET=macosx) or (FTE_TARGET=macosx_x86) #linux->javascript (FTE_TARGET=web) #linux->nacl (FTE_TARGET=nacl NARCH=x86_64) #win32->nacl #linux->droid (make droid) #win32->droid (make droid) #if you are cross compiling, you'll need to use FTE_TARGET=mytarget #cygwin's make's paths confuses non-cygwin things RELEASE_DIR=$(BASE_DIR)/release DEBUG_DIR=$(BASE_DIR)/debug PROFILE_DIR=$(BASE_DIR)/profile COMPILE_SYS:=$(shell uname -o 2>&1) NATIVE_ABSBASE_DIR:=$(realpath $(BASE_DIR)) ifeq ($(COMPILE_SYS),Cygwin) OUT_DIR?=. NATIVE_OUT_DIR:=$(shell cygpath -m $(OUT_DIR)) NATIVE_BASE_DIR:=$(shell cygpath -m $(BASE_DIR)) NATIVE_RELEASE_DIR:=$(shell cygpath -m $(RELEASE_DIR)) NATIVE_DEBUG_DIR:=$(shell cygpath -m $(DEBUG_DIR)) NATIVE_ABSBASE_DIR:=$(shell cygpath -m $(NATIVE_ABSBASE_DIR)) endif NATIVE_OUT_DIR?=$(OUT_DIR) NATIVE_BASE_DIR?=$(BASE_DIR) NATIVE_RELEASE_DIR?=$(RELEASE_DIR) NATIVE_DEBUG_DIR?=$(DEBUG_DIR) #include the appropriate games. ifneq (,$(BRANDING)) BRANDFLAGS+=-DBRANDING_INC=../game_$(BRANDING).h -include game_$(BRANDING).mak endif #correct the gcc build when cross compiling ifneq (,$(findstring win32,$(FTE_TARGET))) ifeq ($(shell $(CC) -v 2>&1 | grep mingw),) #CC didn't state that it was mingw... so try fixing that up #old/original mingw project, headers are not very up to date. ifneq ($(shell which i586-mingw32msvc-gcc 2> /dev/null),) #yup, the alternative exists (this matches the one debian has) CC=i586-mingw32msvc-gcc AR=i586-mingw32msvc-ar WINDRES=i586-mingw32msvc-windres STRIP=i586-mingw32msvc-strip # BITS?=32 endif #mingw64 provides a 32bit toolchain too, which has more up to date header files than the mingw32 project. so favour that if its installed. ifneq ($(shell which i686-w64-mingw32-gcc 2> /dev/null),) #yup, the alternative exists (this matches the one debian has) CC=i686-w64-mingw32-gcc AR=i686-w64-mingw32-ar WINDRES=i686-w64-mingw32-windres STRIP=i686-w64-mingw32-strip # BITS?=32 endif endif endif #correct the gcc build when cross compiling ifneq (,$(findstring win64,$(FTE_TARGET))) ifeq ($(shell $(CC) -v 2>&1 | grep mingw),) #CC didn't state that it was mingw... so try fixing that up ifneq ($(shell which x86_64-w64-mingw32-gcc 2> /dev/null),) #yup, the alternative exists (this matches the one debian has) CC=x86_64-w64-mingw32-gcc -m64 AR=x86_64-w64-mingw32-ar WINDRES=x86_64-w64-mingw32-windres STRIP=x86_64-w64-mingw32-strip # BITS=64 endif ifneq ($(shell which amd64-mingw32msvc-gcc 2> /dev/null),) #yup, the alternative exists (this matches the one debian has) CC=amd64-mingw32msvc-gcc -m64 AR=amd64-mingw32msvc-ar WINDRES=amd64-mingw32msvc-windres STRIP=amd64-mingw32msvc-strip # BITS=64 endif endif endif ifeq ($(FTE_TARGET),win32_sdl) FTE_TARGET=win32_SDL endif USER_TARGET:=$(FTE_TARGET) #make droid-rel doesn't get the right stuff #add a small default config file. its only small. DROID_PACKSU?= $(BASE_DIR)/droid/fte.cfg ANDROID_NDK_ROOT?=~/android-ndk-r8e ANDROID_HOME?=~/android-sdk-linux ANT?=ant JAVATOOL=$(JAVA_HOME)/bin/ ANDROID_SCRIPT=android ifeq ($(DROID_ARCH),) DROID_ARCH=armeabi endif ifeq ($(FTE_TARGET),droid) DROID_API_LEVEL=4 ifeq ($(DROID_ARCH),x86) DROID_PLAT_INC=arch-x86 #google fecked up. anything before api_level 9 will fail to compile on x86 DROID_API_LEVEL=9 else DROID_PLAT_INC=arch-arm #there are 3 ABI targets #armv5 (works on all arm droids) #armv7 (more common on 2.2+ droids) #armv7+neon DROID_ABI?=-mfloat-abi=softfp endif DROIDSYSROOT=$(realpath $(ANDROID_NDK_ROOT)/platforms/android-$(DROID_API_LEVEL)/$(DROID_PLAT_INC)) #if we're running under windows, then we want to run some other binary ifeq ($(shell uname -o 2>&1 | grep Cygwin),) #set up for linux ifeq ($(DROID_ARCH),x86) TOOLCHAINPATH:=$(ANDROID_NDK_ROOT)/toolchains/x86-4.7/prebuilt/linux-x86/bin/ TOOLCHAIN:=$(TOOLCHAINPATH)i686-linux-androideabi- else TOOLCHAINPATH:=$(ANDROID_NDK_ROOT)/toolchains/arm-linux-androideabi-4.7/prebuilt/linux-x86/bin/ TOOLCHAIN:=$(TOOLCHAINPATH)arm-linux-androideabi- endif TOOLOVERRIDES=PATH="/usr/bin:$(realpath $(TOOLCHAINPATH))" CFLAGS=--sysroot="$(realpath $(ANDROID_NDK_ROOT)/platforms/android-$(DROID_API_LEVEL)/$(DROID_PLAT_INC))" CPPFLAGS=--sysroot="$(realpath $(ANDROID_NDK_ROOT)/platforms/android-$(DROID_API_LEVEL)/$(DROID_PLAT_INC))" CONFIGARGS= --with-sysroot="$(realpath $(ANDROID_NDK_ROOT)/platforms/android-$(DROID_API_LEVEL)/$(DROID_PLAT_INC))" else #FIXME: support mingw too... #we're running upon windows ifeq ($(DROID_ARCH),x86) TOOLCHAINPATH:=$(ANDROID_NDK_ROOT)/toolchains/x86-4.7/prebuilt/windows-x86_64/bin/ TOOLCHAIN:=$(TOOLCHAINPATH)i686-linux-android- else TOOLCHAINPATH:=$(ANDROID_NDK_ROOT)/toolchains/arm-linux-androideabi-4.7/prebuilt/windows-x86_64/bin/ TOOLCHAIN:=$(TOOLCHAINPATH)arm-linux-androideabi- endif ANDROID_SCRIPT=android.bat #make can't cope with absolute win32 paths in dependancy files DEPCC= #configure hates android, with its broken default sysroot and lack of path etc DROIDSYSROOT:=$(shell cygpath -m $(DROIDSYSROOT)) TOOLOVERRIDES=PATH="/usr/bin:$(shell cygpath -u $(realpath $(TOOLCHAINPATH)))" CFLAGS=--sysroot="$(DROIDSYSROOT)" CPPFLAGS=--sysroot="$(DROIDSYSROOT)" CONFIGARGS= --with-sysroot="$(shell cygpath -u $(realpath $(ANDROID_NDK_ROOT)/platforms/android-$(DROID_API_LEVEL)/$(DROID_PLAT_INC)))" endif CC:=$(TOOLCHAIN)gcc --sysroot="$(DROIDSYSROOT)" -DANDROID $(DROID_ABI) -fno-strict-aliasing DO_LD=$(DO_ECHO) $(CC) -Wl,-soname,libftedroid.so -shared -Wl,--no-undefined -Wl,-z,noexecstack -o $@ $(LTO_LD) $(WCFLAGS) $(BRANDFLAGS) $(CFLAGS) -llog -lc -lz -lm LD:=$(TOOLCHAIN)ld AR:=$(TOOLCHAIN)ar STRIP=$(TOOLCHAIN)strip endif ifeq ($(FTE_TARGET),win64_sdl) FTE_TARGET=win64_SDL endif #crosscompile macosx from linux, default target ppc 32bit ifeq ($(FTE_TARGET),macosx) ifeq ($(shell $(CC) -v 2>&1 | grep apple),) ifneq ($(shell which powerpc-apple-darwin8-gcc 2> /dev/null),) CC=powerpc-apple-darwin8-gcc STRIP=powerpc-apple-darwin8-strip #seems, macosx has a more limited version of strip STRIPFLAGS= BITS=32 EXTENSION=_ppc endif endif endif ifeq ($(FTE_TARGET),macosx_ppc64) ifeq ($(shell $(CC) -v 2>&1 | grep apple),) ifneq ($(shell which powerpc-apple-darwin8-gcc 2> /dev/null),) FTE_TARGET=macosx CC=powerpc-apple-darwin8-gcc -arch ppc64 STRIP=powerpc-apple-darwin8-strip #seems, macosx has a more limited version of strip STRIPFLAGS= BITS=64 EXTENSION=_ppc endif endif endif ifeq ($(FTE_TARGET),macosx_x86) ifeq ($(shell $(CC) -v 2>&1 | grep apple),) ifneq ($(shell which i686-apple-darwin8-gcc 2> /dev/null),) FTE_TARGET=macosx # i686-apple-darwin8-gcc's default target is i386, powerpc-apple-darwin8-gcc -arch i386 just invokes i686-apple-darwin8-gcc anyway CC=i686-apple-darwin8-gcc STRIP=i686-apple-darwin8-strip #seems, macosx has a more limited version of strip STRIPFLAGS= EXTENSION=_x86 endif endif endif #crosscompile morphos from linux ifeq ($(FTE_TARGET),morphos) ifeq ($(shell $(CC) -v 2>&1 | grep morphos),) ifneq ($(shell which ppc-morphos-gcc 2> /dev/null),) CC=ppc-morphos-gcc #morphos strip has a 'feature', it strips permissions STRIP=ppc-morphos-strip endif endif endif #if you have an x86, you can get gcc to build binaries using 3 different ABIs, instead of builds for just the default ABI ifeq ($(FTE_TARGET),linux32) FTE_TARGET=linux CC=gcc -m32 BITS=32 endif ifeq ($(FTE_TARGET),linuxx32) #note: the x32 abi is still not finished or something. #at the current time, you will need to edit your kernel's commandline to allow this stuff to run FTE_TARGET=linux CC=gcc -mx32 BITS=x32 endif ifeq ($(FTE_TARGET),linux64) FTE_TARGET=linux CC=gcc -m64 BITS=64 endif ifeq ($(FTE_TARGET),) #user didn't specify prefered target ifneq ($(shell uname 2>&1 | grep CYGWIN),) FTE_TARGET=cygwin ANDROID_SCRIPT=android.bat endif ifneq ($(shell $(CC) -v 2>&1 | grep mingw),) FTE_TARGET=win32 endif ifeq ($(FTE_TARGET),) #still not set ifeq ($(shell uname),Linux) FTE_TARGET=linux endif ifeq ($(shell uname),Darwin) FTE_TARGET=macosx endif ifeq ($(shell uname),FreeBSD) FTE_TARGET=bsd endif ifeq ($(shell uname),NetBSD) FTE_TARGET=bsd endif ifeq ($(shell uname),OpenBSD) FTE_TARGET=bsd endif ifeq ($(shell uname),MorphOS) FTE_TARGET=morphos endif #else I've no idea what it is you're running endif FTE_TARGET ?= unk #so go for sdl. endif ifneq ($(shell ls|grep config.h),) HAVECONFIG=-DHAVE_CONFIG_H endif CLIENT_DIR=$(BASE_DIR)/client GL_DIR=$(BASE_DIR)/gl D3D_DIR=$(BASE_DIR)/d3d SERVER_DIR=$(BASE_DIR)/server COMMON_DIR=$(BASE_DIR)/common HTTP_DIR=$(BASE_DIR)/http #LIBS_DIR=$(BASE_DIR)/libs LIBS_DIR?=. PROGS_DIR=$(BASE_DIR)/qclib NACL_DIR=$(BASE_DIR)/nacl BOTLIB_DIR=$(BASE_DIR)/botlib ALL_CFLAGS=$(HAVECONFIG) $(VISIBILITY_FLAGS) $(BRANDFLAGS) $(CFLAGS) $(BASE_CFLAGS) $(WCFLAGS) $(ARCH_CFLAGS) #cheap compile-everything-in-one-unit (compile becomes preprocess only) ifneq ($(WPO),) LTO_CC= -E LTO_LD= -combine -fwhole-program -x c LTO_END=ltoxnone LTO_START=ltoxc endif #proper/consistant link-time optimisations (requires gcc 4.5+ or so) ifneq ($(LTO),) LTO_CC=-flto LTO_LD=-flto endif #DO_ECHO=@echo $< && DO_ECHO=@ #DO_ECHO= DO_CC=$(DO_ECHO) $(CC) $(LTO_CC) $(ALL_CFLAGS) -o $@ -c $< ifeq ($(FTE_TARGET),vc) BASELDFLAGS= endif ifeq ($(FTE_TARGET),cygwin) BASELDFLAGS=-lm endif ifeq ($(FTE_TARGET),morphos) BASELDFLAGS=-lm endif ifeq ($(FTE_TARGET),bsd) BASELDFLAGS=-lm VISIBILITY_FLAGS=-fvisibility=hidden endif ifeq ($(FTE_TARGET),linux) VISIBILITY_FLAGS=-fvisibility=hidden endif ifeq ($(FTE_TARGET),droid) VISIBILITY_FLAGS=-fvisibility=hidden endif ifeq ($(FTE_TARGET),macosx) VISIBILITY_FLAGS=-fvisibility=hidden endif BASELDFLAGS ?= -lm -ldl -lpthread ifeq (win,$(findstring cyg,$(FTE_TARGET))$(findstring win,$(FTE_TARGET))) BASELDFLAGS=-lm MINGW_LIBS_DIR=$(LIBS_DIR)/mingw-libs ifeq ($(shell echo $(FTE_TARGET)|grep -v win64),) MINGW_LIBS_DIR=$(LIBS_DIR)/mingw64-libs endif IMAGELDFLAGS=$(MINGW_LIBS_DIR)/libpng.a $(MINGW_LIBS_DIR)/libz.a $(MINGW_LIBS_DIR)/libjpeg.a OGGVORBISLDFLAGS=$(MINGW_LIBS_DIR)/libvorbisfile.a $(MINGW_LIBS_DIR)/libvorbis.a $(MINGW_LIBS_DIR)/libogg.a endif #try to statically link ifeq ($(COMPILE_SYS),Darwin) ifneq (,$(findstring SDL,$(FTE_TARGET))) IMAGELDFLAGS = $(shell pkg-config libpng --variable=libdir)/libpng.a $(shell pkg-config libjpeg --variable=libdir)/libjpeg.a OGGVORBISLDFLAGS = $(shell pkg-config vorbisfile --variable=libdir)/libvorbisfile.a $(shell pkg-config vorbis --variable=libdir)/libvorbis.a $(shell pkg-config ogg --variable=libdir)/libogg.a endif endif IMAGELDFLAGS ?= -lpng -ljpeg OGGVORBISLDFLAGS ?= -lvorbisfile -lvorbis -logg VISIBILITY_FLAGS?= #BASELDFLAGS=-lm -lz XLDFLAGS=$(IMAGELDFLAGS) #hack some other arguments based upon the toolchain ifeq ($(FTE_TARGET),vc) WARNINGFLAGS=-W3 -D_CRT_SECURE_NO_WARNINGS GNUC_FUNCS= else WARNINGFLAGS=-Wall -Wno-pointer-sign -Wno-unknown-pragmas -Wno-format-zero-length -Wno-strict-aliasing GNUC_FUNCS= -Dstrnicmp=strncasecmp -Dstricmp=strcasecmp endif SDL_INCLUDES= #-I$(LIBS_DIR)/sdl/include -I/usr/include/SDL -I$(LIBS_DIR)/sdl/include/SDL BOTLIB_CFLAGS=-I$(BOTLIB_DIR) -DBOTLIB BASE_CFLAGS=$(WARNINGFLAGS) $(GNUC_FUNCS) -I$(CLIENT_DIR) -I$(SERVER_DIR) -I$(COMMON_DIR) -I$(GL_DIR) -I$(D3D_DIR) -I$(PROGS_DIR) -I. -I$(LIBS_DIR) -I$(LIBS_DIR)/dxsdk9/include -I$(LIBS_DIR)/dxsdk7/include $(SDL_INCLUDES) -I./libs/freetype2/include -I./libs/freetype2/include/freetype -I./libs/speex $(BOTLIB_CFLAGS) $(SVNREVISION) CLIENT_ONLY_CFLAGS=-DCLIENTONLY SERVER_ONLY_CFLAGS=-DSERVERONLY JOINT_CFLAGS= DEBUG_CFLAGS?=-ggdb -g DEBUG_CFLAGS+=-DDEBUG RELEASE_CFLAGS?=-O3 -ffast-math $(CPUOPTIMIZATIONS) #incase our compiler doesn't support it (mingw) ifeq ($(shell LANG=c $(CC) -rdynamic 2>&1 | grep unrecognized),) DEBUG_CFLAGS+= -rdynamic endif OBJS+=$(SPEEX_OBJS) PROFILE_CFLAGS=-pg DX7SDK=-I./libs/dxsdk7/include/ GLCFLAGS?=-DGLQUAKE D3DCFLAGS?=-DD3D9QUAKE NPFTECFLAGS=-DNPFTE SPEEXCFLAGS=-DSPEEX_STATIC -I$(BASE_DIR)/libs/speex/include -DFIXED_POINT -DUSE_KISS_FFT -DEXPORT="" SPEEX_OBJS = \ bits.o \ buffer.o \ cb_search.o \ exc_10_16_table.o \ exc_10_32_table.o \ exc_20_32_table.o \ exc_5_256_table.o \ exc_5_64_table.o \ exc_8_128_table.o \ fftwrap.o \ filterbank.o \ filters.o \ gain_table.o \ gain_table_lbr.o \ hexc_10_32_table.o \ hexc_table.o \ high_lsp_tables.o \ jitter.o \ kiss_fft.o \ kiss_fftr.o \ lpc.o \ lsp.o \ lsp_tables_nb.o \ ltp.o \ mdf.o \ modes.o \ modes_wb.o \ nb_celp.o \ preprocess.o \ quant_lsp.o \ resample.o \ sb_celp.o \ scal.o \ smallft.o \ speex.o \ speex_callbacks.o \ speex_header.o \ stereo.o \ vbr.o \ vq.o \ window.o CLIENT_OBJS = \ textedit.o \ fragstats.o \ teamplay.o \ zqtp.o \ cl_demo.o \ cl_ents.o \ clq2_ents.o \ cl_input.o \ in_generic.o \ cl_main.o \ cl_parse.o \ cl_pred.o \ cl_tent.o \ cl_cam.o \ cl_screen.o \ pr_clcmd.o \ cl_ui.o \ cl_ignore.o \ cl_cg.o \ clq3_parse.o \ pr_csqc.o \ console.o \ image.o \ keys.o \ menu.o \ m_download.o \ m_master.o \ m_multi.o \ m_items.o \ m_options.o \ m_single.o \ m_script.o \ m_mp3.o \ roq_read.o \ clq2_cin.o \ r_part.o \ p_script.o \ p_null.o \ p_classic.o \ r_partset.o \ renderer.o \ renderque.o \ sbar.o \ skin.o \ snd_al.o \ snd_dma.o \ snd_mem.o \ snd_mix.o \ snd_mp3.o \ snd_ov.o \ valid.o \ view.o \ wad.o \ \ ftpclient.o \ \ \ pr_menu.o GLQUAKE_OBJS = \ gl_draw.o \ gl_backend.o \ gl_rmain.o \ gl_rmisc.o \ gl_rsurf.o \ gl_screen.o \ gl_bloom.o \ gl_vidcommon.o D3DQUAKE_OBJS = \ d3d_backend.o \ d3d_image.o \ d3d_shader.o \ vid_d3d.o \ d3d11_backend.o \ d3d11_image.o \ d3d11_shader.o \ vid_d3d11.o D3DGL_OBJS = \ gl_font.o \ gl_ngraph.o \ gl_shader.o \ gl_shadow.o \ gl_rlight.o \ gl_hlmdl.o \ gl_warp.o \ ltface.o \ r_surf.o \ r_2d.o MP3_OBJS = \ fixed.o \ bit.o \ timer.o \ stream.o \ frame.o \ synth.o \ decoder.o \ layer12.o \ layer3.o \ huffman.o \ mymad.o QCC_OBJS= \ comprout.o \ hash.o \ qcc_cmdlib.o \ qccmain.o \ qcc_pr_comp.o \ qcc_pr_lex.o \ qcd_main.o PROGS_OBJS = \ $(QCC_OBJS) \ initlib.o \ pr_bgcmd.o \ pr_skelobj.o \ pr_edict.o \ pr_exec.o \ pr_multi.o \ pr_x86.o \ qcdecomp.o SERVER_OBJS = \ pr_cmds.o \ pr_q1qvm.o \ pr_lua.o \ sv_master.o \ sv_init.o \ sv_main.o \ sv_nchan.o \ sv_ents.o \ sv_send.o \ sv_user.o \ sv_sql.o \ sv_mvd.o \ sv_ccmds.o \ sv_cluster.o \ sv_rankin.o \ sv_chat.o \ sv_demo.o \ net_preparse.o \ savegame.o \ svq2_ents.o \ svq2_game.o \ svq3_game.o \ webgen.o \ ftpserver.o \ httpserver.o SERVERONLY_OBJS = \ sv_sys_unix.o WINDOWSSERVERONLY_OBJS = \ net_ssl_winsspi.o \ sv_sys_win.o \ sys_win_threads.o WINDOWS_OBJS = \ snd_win.o \ snd_directx.o \ cd_win.o \ fs_win32.o \ in_win.o \ vid_headless.o \ sys_win.o \ sys_win_threads.o \ net_ssl_winsspi.o \ $(LTO_END) resources.o $(LTO_START) COMMON_OBJS = \ gl_alias.o \ gl_heightmap.o \ gl_model.o \ com_mesh.o \ com_phys_ode.o \ common.o \ cvar.o \ cmd.o \ crc.o \ net_ssl_gnutls.o \ net_master.o \ fs.o \ fs_stdio.o \ fs_pak.o \ fs_zip.o \ fs_xz.o \ mathlib.o \ huff.o \ md4.o \ sha1.o \ log.o \ net_chan.o \ net_wins.o \ net_ice.o \ httpclient.o \ zone.o \ qvm.o \ r_d3.o \ gl_q2bsp.o \ glmod_doom.o \ q3common.o \ world.o \ sv_phys.o \ sv_move.o \ pmove.o \ pmovetst.o \ iwebiface.o \ translate.o \ plugin.o \ q1bsp.o \ q2pmove.o BOTLIB_OBJS = \ be_aas_bspq3.o \ be_aas_cluster.o \ be_aas_debug.o \ be_aas_entity.o \ be_aas_file.o \ be_aas_main.o \ be_aas_move.o \ be_aas_optimize.o \ be_aas_reach.o \ be_aas_route.o \ be_aas_routealt.o \ be_aas_sample.o \ be_ai_char.o \ be_ai_chat.o \ be_ai_gen.o \ be_ai_goal.o \ be_ai_move.o \ be_ai_weap.o \ be_ai_weight.o \ be_ea.o \ be_interface.o \ l_crc.o \ l_libvar.o \ l_log.o \ l_memory.o \ l_precomp.o \ l_script.o \ l_struct.o #the defaults for sdl come first #CC_MACHINE:=$(shell $(CC) -dumpmachine) ifeq ($(FTE_TARGET),SDL2) SDLCONFIG?=sdl2-config FTE_FULLTARGET?=sdl2$(BITS) endif ifeq ($(FTE_TARGET),SDL) FTE_FULLTARGET?=sdl$(BITS) endif SDLCONFIG?=sdl-config FTE_FULLTARGET?=sdl$(FTE_TARGET)$(BITS) GLCL_OBJS=$(GL_OBJS) $(D3DGL_OBJS) $(GLQUAKE_OBJS) gl_vidsdl.o snd_sdl.o cd_sdl.o sys_sdl.o in_sdl.o GL_EXE_NAME=../fteqw_gl$(FTE_FULLTARGET) GLCL_EXE_NAME=../fteqwcl_gl$(FTE_FULLTARGET) #SDLCONFIG:=libs/sdl2_mingw/$(CC_MACHINE)/bin/sdl2-config --prefix=libs/sdl2_mingw/$(CC_MACHINE) ifdef windir GL_LDFLAGS=$(GLLDFLAGS) -lmingw32 -lws2_32 `$(SDLCONFIG) --static-libs` else GL_LDFLAGS=$(GLLDFLAGS) $(IMAGELDFLAGS) $(OGGVORBISLDFLAGS) `$(SDLCONFIG) --static-libs` endif GL_CFLAGS=-DFTE_SDL $(GLCFLAGS) `$(SDLCONFIG) --cflags` GLB_DIR=gl_$(FTE_FULLTARGET) GLCL_DIR=glcl_$(FTE_FULLTARGET) SV_OBJS=$(COMMON_OBJS) $(SERVER_OBJS) $(PROGS_OBJS) $(SERVERONLY_OBJS) SV_EXE_NAME=../fteqw_sv$(FTE_FULLTARGET) SV_CFLAGS=$(SERVER_ONLY_CFLAGS) SV_LDFLAGS= MINGL_DIR=mingl_$(FTE_FULLTARGET) MINGL_EXE_NAME=../fteqw_mingl$(FTE_FULLTARGET) MB_DIR=m_$(FTE_FULLTARGET) M_EXE_NAME=../fteqw_$(FTE_FULLTARGET) MCL_OBJS=$(D3DGL_OBJS) $(GLQUAKE_OBJS) $(SOFTWARE_OBJS) gl_vidsdl.o snd_sdl.o cd_sdl.o sys_sdl.o in_sdl.o M_CFLAGS=$(GLCFLAGS) `$(SDLCONFIG) --cflags` M_LDFLAGS=$(GLLDFLAGS) $(IMAGELDFLAGS) $(OGGVORBISLDFLAGS) ifdef windir M_LDFLAGS=$(MLDFLAGS) -lmingw32 -lws2_32 `$(SDLCONFIG) --static-libs` else #pthread is needed because of SDL. M_LDFLAGS=$(MLDFLAGS) `$(SDLCONFIG) --static-libs` $(IMAGELDFLAGS) $(OGGVORBISLDFLAGS) endif ifeq (,$(findstring NO_ZLIB,$(CFLAGS))) SV_LDFLAGS+=-lz GL_LDFLAGS+=-lz M_LDFLAGS+=-lz endif #specific targets override those defaults as needed. #google native client ifeq ($(FTE_TARGET),nacl) OGGVORBISLDFLAGS= NARCH ?= x86_32 ifeq ($(shell uname -o 2>&1 | grep Cygwin),) MYOS=linux else MYOS=win endif CC= STRIP= ifeq ($(NARCH),x86_32) CC=$(NACL_SDK_ROOT)/toolchain/$(MYOS)_x86_newlib/bin/i686-nacl-gcc -DNACL -m32 STRIP=$(NACL_SDK_ROOT)/toolchain/$(MYOS)_x86_newlib/bin/i686-nacl-strip BITS= NACLLIBS=newlib_x86_32/Release endif ifeq ($(NARCH),x86_64) CC=$(NACL_SDK_ROOT)/toolchain/$(MYOS)_x86_newlib/bin/i686-nacl-gcc -DNACL -m64 STRIP=$(NACL_SDK_ROOT)/toolchain/$(MYOS)_x86_newlib/bin/i686-nacl-strip BITS= NACLLIBS=newlib_x86_64/Release endif ifeq ($(NARCH),arm) CC=NACL_SDK_ROOT/toolchain/$(MYOS)_arm_newlib/bin/arm-nacl-gcc -DNACL STRIP=$(NACL_SDK_ROOT)/toolchain/$(MYOS)_arm_newlib/bin/arm-nacl-strip BITS= NACLLIBS=newlib_arm/Release endif ifeq ($(NARCH),pnacl) CC=$(NACL_SDK_ROOT)/toolchain/$(MYOS)_pnacl/bin/pnacl-clang -DNACL STRIP=$(NACL_SDK_ROOT)/toolchain/$(MYOS)_pnacl/bin/pnacl-strip STRIPFLAGS= BITS= NACLLIBS=pnacl/Release endif BASELDFLAGS = -lm -lppapi_gles2 -lnosys -lppapi IMAGELDFLAGS = GL_CFLAGS=$(GLCFLAGS) GL_CFLAGS+=$(SPEEXCFLAGS) GL_CFLAGS+=-I$(realpath $(NACL_SDK_ROOT)/include) BASELDFLAGS+=-L$(realpath $(NACL_SDK_ROOT)/lib/$(NACLLIBS)) GLCL_OBJS=$(GL_OBJS) $(D3DGL_OBJS) $(GLQUAKE_OBJS) $(SPEEX_OBJS) sys_ppapi.o cd_null.o gl_vidppapi.o fs_ppapi.o snd_ppapi.o GL_LDFLAGS=$(GLLDFLAGS) $(OGGVORBISLDFLAGS) M_LDFLAGS=$(GLLDFLAGS) $(OGGVORBISLDFLAGS) GLB_DIR=gl_nacl_$(NARCH) MINGL_DIR=mingl_nacl_$(NARCH) ifeq ($(NARCH),pnacl) GL_EXE_NAME=../fteqw.pexe GLCL_EXE_NAME=../fteqwcl.pexe MINGL_EXE_NAME=../fteqw_mingl.pexe else GL_EXE_NAME=../fteqw_$(NARCH).nexe GLCL_EXE_NAME=../fteqwcl_$(NARCH).nexe MINGL_EXE_NAME=../fteqw_mingl_$(NARCH).nexe endif endif #FTE_TARGET=win32_SDL | FTE_TARGET=win64_SDL (MinGW32 + SDL | MinGW64 + SDL) ifeq (win_SDL,$(findstring win,$(FTE_TARGET))$(findstring _SDL,$(FTE_TARGET))) LIBS_DIR=./libs ifneq (,$(findstring win64,$(FTE_TARGET))) BITS=64 endif EXEPOSTFIX=.exe CC_MACHINE:=$(shell $(CC) -dumpmachine) ARCH_PREDEP=$(BASE_DIR)/libs/SDL2-2.0.1/$(CC_MACHINE)/bin/sdl2-config SDLCONFIG=$(ARCH_PREDEP) --prefix=$(BASE_DIR)/libs/SDL2-2.0.1/$(CC_MACHINE) ARCH_CFLAGS=`$(SDLCONFIG) --cflags` #the defaults for sdl come first GLCL_OBJS=$(GL_OBJS) $(D3DGL_OBJS) $(GLQUAKE_OBJS) $(BOTLIB_OBJS) $(SPEEX_OBJS) gl_vidsdl.o snd_sdl.o cd_sdl.o sys_sdl.o in_sdl.o snd_directx.o $(LTO_END) resources.o $(LTO_START) GL_EXE_NAME=../fteqw_sdl_gl$(BITS)$(EXEPOSTFIX) GLCL_EXE_NAME=../fteqwcl_sdl$(BITS)$(EXEPOSTFIX) ifdef windir GL_LDFLAGS=$(GLLDFLAGS) -lmingw32 -lws2_32 `$(SDLCONFIG) --static-libs` else GL_LDFLAGS=$(IMAGELDFLAGS) $(OGGVORBISLDFLAGS) -lws2_32 -lmingw32 $(SDL_LDFLAGS) -mwindows -ldxguid -lwinmm -lole32 $(GLLDFLAGS) `$(SDLCONFIG) --static-libs` endif GL_CFLAGS=-DFTE_SDL -I$(MINGW_LIBS_DIR)/ -I$(MINGW_LIBS_DIR) -I$(LIBS_DIR) $(GLCFLAGS) -DLIBVORBISFILE_STATIC $(DX7SDK) $(SPEEXCFLAGS) ifeq ($(shell echo $(FTE_TARGET)|grep -E -i -v "win32.*sdl"),) GL_CFLAGS+= -D_MINGW_VFPRINTF endif GLB_DIR=gl_mgw_sdl$(BITS) GLCL_DIR=glcl_mgw_sdl$(BITS) SV_OBJS=$(COMMON_OBJS) $(SERVER_OBJS) $(PROGS_OBJS) $(WINDOWSSERVERONLY_OBJS) $(BOTLIB_OBJS) $(LTO_END) resources.o $(LTO_START) SV_EXE_NAME=../fteqw_sdl_sv$(BITS)$(EXEPOSTFIX) SV_CFLAGS=$(SERVER_ONLY_CFLAGS) -DFTE_SDL SV_LDFLAGS=$(MINGW_LIBS_DIR)/libz.a -lm -lmingw32 -lws2_32 -lwinmm `$(SDLCONFIG) --static-libs` MINGL_DIR=mingl_sdlwin$(BITS) MINGL_EXE_NAME=../fteqw_sdl_mingl$(BITS)$(EXEPOSTFIX) MB_DIR=m_mgw_sdl$(BITS) M_EXE_NAME=../fteqw_sdl$(BITS)$(EXEPOSTFIX) MCL_OBJS=$(D3DGL_OBJS) $(GLQUAKE_OBJS) $(SOFTWARE_OBJS) $(D3DQUAKE_OBJS) $(BOTLIB_OBJS) $(SPEEX_OBJS) gl_vidsdl.o snd_sdl.o cd_sdl.o sys_sdl.o in_sdl.o snd_directx.o $(LTO_END) resources.o $(LTO_START) M_CFLAGS=$(D3DCFLAGS) -DFTE_SDL -I$(LIBS_DIR) -I$(MINGW_LIBS_DIR)/ -I$(MINGW_LIBS_DIR) $(GLCFLAGS) -DLIBVORBISFILE_STATIC -D_MERGED_SDL $(DX7SDK) $(SPEEXCFLAGS) ifeq ($(shell echo $(FTE_TARGET)|grep -E -i -v "win32.*sdl"),) M_CFLAGS+= -D_MINGW_VFPRINTF endif M_LDFLAGS=$(GLLDFLAGS) $(IMAGELDFLAGS) $(OGGVORBISLDFLAGS) ifdef windir M_LDFLAGS=$(MLDFLAGS) -lmingw32 -lws2_32 `$(SDLCONFIG) --static-libs` else #pthread is needed because of SDL. M_LDFLAGS=$(IMAGELDFLAGS) $(OGGVORBISLDFLAGS) -lws2_32 -lmingw32 -mwindows -ldxguid -lwinmm -lole32 $(MLDFLAGS) `$(SDL_CONFIG) --libs` $(IMAGELDFLAGS) endif D3DCL_OBJS=$(D3DQUAKE_OBJS) $(SPEEX_OBJS) snd_sdl.o cd_sdl.o sys_sdl.o in_sdl.o snd_directx.o $(D3DGL_OBJS) $(LTO_END) resources.o $(LTO_START) D3D_EXE_NAME=../fted3d_sdl_qw$(BITS)$(EXEPOSTFIX) D3DCL_EXE_NAME=../fted3d_sdl_clqw$(BITS)$(EXEPOSTFIX) D3D_LDFLAGS=$(IMAGELDFLAGS) $(OGGVORBISLDFLAGS) -lws2_32 -lmingw32 $(SDL_LDFLAGS) -mwindows -ldxguid -lwinmm -lole32 D3D_CFLAGS=$(D3DCFLAGS) -DFTE_SDL -DNO_XFLIP -I$(LIBS_DIR) -I$(MINGW_LIBS_DIR)/ -I$(MINGW_LIBS_DIR) -DLIBVORBISFILE_STATIC $(DX7SDK) $(SPEEXCFLAGS) ifeq ($(shell echo $(FTE_TARGET)|grep -E -i -v "win32.*sdl"),) D3D_CFLAGS+= -D_MINGW_VFPRINTF endif D3DB_DIR=sdl_d3d_mgw$(BITS) D3DCL_DIR=sdl_d3dcl_mgw$(BITS) endif #FTE_TARGET=vc (Visual C) ifeq ($(FTE_TARGET),vc) DEBUG_CFLAGS= MSVCDIR=Microsoft Visual Studio 10.0 ifeq ($(WINRT),1) WINDOWSSDKDIR=C:/Program Files (x86)/Windows Kits/8.1 ifeq ($(BITS),64) WINDRES=x86_64-w64-mingw32-windres MSVCPATH=C:/Program Files (x86)/$(MSVCDIR)/VC/BIN/amd64/ else WINDRES=i686-w64-mingw32-windres MSVCPATH=C:/Program Files (x86)/$(MSVCDIR)/VC/BIN/ SDKINC=-I"$(WINDOWSSDKDIR)\Include\shared" -I"$(WINDOWSSDKDIR)\Include\um" MSVCINC=-I"C:\Program Files (x86)\$(MSVCDIR)\VC\INCLUDE" #-I"C:\Program Files (x86)\$(MSVCDIR)\VC\ATLMFC\INCLUDE" # -I"C:\Program Files (x86)\$(MSVCDIR)\VC\PlatformSDK\include" -I"C:\Program Files (x86)\$(MSVCDIR)\SDK\v2.0\include" MSVCLIB=/LIBPATH:"C:\Program Files (x86)\$(MSVCDIR)\VC\ATLMFC\LIB" /LIBPATH:"C:\Program Files (x86)\$(MSVCDIR)\VC\LIB" /LIBPATH:"$(WINDOWSSDKDIR)/lib/winv6.3/um/x86" /LIBPATH:"C:\Program Files (x86)\$(MSVCDIR)\SDK\v2.0\LIB" JPEGLIB=libs/jpeg.lib endif else WINDOWSSDKDIR=C:/Program Files/Microsoft SDKs/Windows/v7.1 ifeq ($(BITS),64) WINDRES=x86_64-w64-mingw32-windres MSVCPATH=C:/Program Files (x86)/$(MSVCDIR)/VC/BIN/amd64/ MSVCINC=-I"C:\Program Files (x86)\$(MSVCDIR)\VC\ATLMFC\INCLUDE" -I"C:\Program Files (x86)\$(MSVCDIR)\VC\INCLUDE" -I"$(WINDOWSSDKDIR)/Include" -I"C:\Program Files (x86)\$(MSVCDIR)\VC\PlatformSDK\include" -I"C:\Program Files (x86)\$(MSVCDIR)\SDK\v2.0\include" MSVCLIB=/LIBPATH:"C:\Program Files (x86)\$(MSVCPATH)\VC\ATLMFC\LIB\amd64" /LIBPATH:"C:\Program Files (x86)\$(MSVCDIR)\VC\LIB\amd64" /LIBPATH:"$(WINDOWSSDKDIR)\lib\amd64" /LIBPATH:"C:\Program Files (x86)\$(MSVCDIR)\SDK\v2.0\LIB\AMD64" /LIBPATH:"$(WINDOWSSDKDIR)\lib\x64" JPEGLIB=libs/libjpeg$(BITS).lib else WINDRES=i686-w64-mingw32-windres MSVCPATH=C:/Program Files (x86)/$(MSVCDIR)/VC/BIN/ MSVCINC=-I"C:\Program Files (x86)\$(MSVCDIR)\VC\ATLMFC\INCLUDE" -I"C:\Program Files (x86)\$(MSVCDIR)\VC\INCLUDE" -I"$(WINDOWSSDKDIR)/Include" -I"C:\Program Files (x86)\$(MSVCDIR)\VC\PlatformSDK\include" -I"C:\Program Files (x86)\$(MSVCDIR)\SDK\v2.0\include" MSVCLIB=/LIBPATH:"C:\Program Files (x86)\$(MSVCDIR)\VC\ATLMFC\LIB" /LIBPATH:"C:\Program Files (x86)\$(MSVCDIR)\VC\LIB" /LIBPATH:"$(WINDOWSSDKDIR)\lib" /LIBPATH:"C:\Program Files (x86)\$(MSVCDIR)\SDK\v2.0\LIB" JPEGLIB=libs/jpeg.lib endif endif STRIP=@echo strip EXEPOSTFIX=.exe CC=PATH="C:\Program Files (x86)\$(MSVCDIR)\Common7\IDE" "$(MSVCPATH)cl" $(SDKINC) $(MSVCINC) -D_CRT_SECURE_NO_WARNINGS DEBUG_CFLAGS ?= -Od $(CPUOPTIMIZATIONS) /fp:fast PROFILE_CFLAGS = -O2 -Ot -Ox -GL $(CPUOPTIMISATIONS) /fp:fast PROFILE_LDFLAGS = /LTCG:PGINSTRUMENT RELEASE_CFLAGS = -O2 -Ot -Ox -GL -GS- -Gr $(CPUOPTIMIZATIONS) /fp:fast RELEASE_LDFLAGS = /LTCG # /LTCG:PGOPTIMIZE DO_CC=$(DO_ECHO) $(CC) /nologo $(ALL_CFLAGS) -Fo$(shell cygpath -m $@) -c $(shell cygpath -m $<) DO_LD=$(DO_ECHO) PATH="C:\Program Files (x86)\$(MSVCDIR)\Common7\IDE" "$(MSVCPATH)link" /nologo /out:"$(shell cygpath -m $@)" /nodefaultlib:libc.lib /LARGEADDRESSAWARE /nodefaultlib:MSVCRT $(MSVCLIB) $(SDKLIB) /manifest:no /OPT:REF wsock32.lib user32.lib kernel32.lib advapi32.lib winmm.lib libs/zlib$(BITS).lib shell32.lib PRECOMPHEADERS = DEPCC= LIBS_DIR=./libs/ SPEEXCFLAGS+= -Dinline=_inline -D_USE_MATH_DEFINES BASE_CFLAGS:=$(WARNINGFLAGS) $(GNUC_FUNCS) -I$(shell cygpath -m $(CLIENT_DIR)) -I$(shell cygpath -m $(SERVER_DIR)) -I$(shell cygpath -m $(COMMON_DIR)) -I$(shell cygpath -m $(GL_DIR)) -I$(shell cygpath -m $(D3D_DIR)) -I$(shell cygpath -m $(PROGS_DIR)) -I. -I$(LIBS_DIR) -I$(LIBS_DIR)/dxsdk9/include -I$(LIBS_DIR)/dxsdk7/include $(SDL_INCLUDES) -I./libs/freetype2/include -I./libs/freetype2/include/freetype -I./libs/speex $(BOTLIB_CFLAGS) $(SVNREVISION) SV_CFLAGS=$(SERVER_ONLY_CFLAGS) $(W32_CFLAGS) -DMULTITHREAD -DMSVCLIBPATH=libs/ SV_EXE_NAME=../fteqwsv$(BITS)$(EXEPOSTFIX) SV_DIR=sv_vc$(BITS) SV_OBJS=$(COMMON_OBJS) $(SERVER_OBJS) $(PROGS_OBJS) $(WINDOWSSERVERONLY_OBJS) fs_win32.o resources.o SV_LDFLAGS=/subsystem:console GL_EXE_NAME=../fteglqw$(BITS)$(EXEPOSTFIX) GLCL_EXE_NAME=../minfteqw.gl$(BITS) GLB_DIR=gl_vc$(BITS) GLCL_DIR=glcl_vc$(BITS) GL_LDFLAGS=$(GLLDFLAGS) $(JPEGLIB) libs/libpng$(BITS).lib uuid.lib gdi32.lib ole32.lib /subsystem:windows GL_CFLAGS=$(GLCFLAGS) $(W32_CFLAGS) -DMULTITHREAD $(SPEEXCFLAGS) -DMSVCLIBPATH=libs/ GLCL_OBJS=$(D3DGL_OBJS) $(GLQUAKE_OBJS) $(SPEEX_OBJS) gl_vidnt.o $(WINDOWS_OBJS) GL_OBJS= MINGL_DIR=mingl_vc$(BITS) MINGL_EXE_NAME=../fteminglqw$(BITS)$(EXEPOSTFIX) D3DCL_OBJS=$(D3DQUAKE_OBJS) $(D3DGL_OBJS) $(SPEEX_OBJS) $(WINDOWS_OBJS) D3D_EXE_NAME=../fted3dqw$(BITS)$(EXEPOSTFIX) D3DCL_EXE_NAME=../fted3dclqw$(BITS)$(EXEPOSTFIX) D3D_LDFLAGS=$(JPEGLIB) libs/libpng$(BITS).lib uuid.lib gdi32.lib ole32.lib /subsystem:windows D3D_CFLAGS=$(D3DCFLAGS) $(W32_CFLAGS) $(DX7SDK) -DMULTITHREAD $(SPEEXCFLAGS) -DMSVCLIBPATH=libs/ D3DB_DIR=d3d_vc$(BITS) D3DCL_DIR=d3dcl_vc$(BITS) M_EXE_NAME=../fteqw$(BITS)$(EXEPOSTFIX) MCL_OBJS=$(GL_OBJS) $(D3DGL_OBJS) $(D3DQUAKE_OBJS) $(GLQUAKE_OBJS) gl_vidnt.o $(SPEEX_OBJS) $(WINDOWS_OBJS) M_CFLAGS=$(D3DCFLAGS) $(GLCFLAGS) $(W32_CFLAGS) $(D3DCFLAGS) -DMULTITHREAD $(SPEEXCFLAGS) -DMSVCLIBPATH=libs/ MB_DIR=m_vc$(BITS) M_LDFLAGS=$(GLLDFLAGS) $(JPEGLIB) libs/libpng$(BITS).lib uuid.lib gdi32.lib ole32.lib /subsystem:windows endif #FTE_TARGET=win32 | FTE_TARGET=win64 (MinGW32 | MinGW64) ifeq (win,$(findstring win,$(FTE_TARGET))$(findstring _SDL,$(FTE_TARGET))) # The extra object file called resources.o is specific for MinGW to link the icon in #cygwin's gcc requires an extra command to use mingw instead of cygwin (default paths, etc). ifneq ($(shell $(CC) -dumpmachine 2>&1 | grep cygwin),) W32_CFLAGS=-mno-cygwin endif ifeq ($(FTE_TARGET),win64) BITS=64 endif BASELDFLAGS= # Allow 32bit FTE to access beyond the 2GB address space ifeq ($(FTE_TARGET),win32) BASELDFLAGS=-Wl,--large-address-aware endif BASELDFLAGS+=-lcomctl32 EXEPOSTFIX=.exe SV_CFLAGS=$(SERVER_ONLY_CFLAGS) $(W32_CFLAGS) LIBS_DIR = $(BASE_DIR)/libs SV_EXE_NAME=../fteqwsv$(BITS)$(EXEPOSTFIX) SV_LDFLAGS=$(MINGW_LIBS_DIR)/libz.a -lws2_32 -lwinmm SV_DIR=sv_mingw$(BITS) SV_OBJS=$(COMMON_OBJS) $(SERVER_OBJS) $(PROGS_OBJS) $(WINDOWSSERVERONLY_OBJS) $(BOTLIB_OBJS) fs_win32.o $(LTO_END) resources.o $(LTO_START) GLCL_OBJS=$(GL_OBJS) $(D3DGL_OBJS) $(GLQUAKE_OBJS) $(BOTLIB_OBJS) $(SPEEX_OBJS) gl_vidnt.o $(WINDOWS_OBJS) GL_EXE_NAME=../fteglqw$(BITS)$(EXEPOSTFIX) GLCL_EXE_NAME=../fteglqwcl$(BITS)$(EXEPOSTFIX) GL_LDFLAGS=$(GLLDFLAGS) $(IMAGELDFLAGS) $(OGGVORBISLDFLAGS) -ldxguid -lws2_32 -lwinmm -lgdi32 -lole32 -Wl,--subsystem,windows GL_CFLAGS=$(GLCFLAGS) $(W32_CFLAGS) $(DX7SDK) -DMULTITHREAD -DLIBVORBISFILE_STATIC $(SPEEXCFLAGS) GLB_DIR=gl_mgw$(BITS) GLCL_DIR=glcl_mgw$(BITS) NPFTE_OBJS=httpclient.o image.o sys_win_threads.o sys_npfte.o sys_axfte.o sys_plugfte.o $(LTO_END) npplug.o ../../ftequake/npapi.def $(LTO_START) NPFTE_DLL_NAME=../npfte$(BITS).dll NPFTE_LDFLAGS=-Wl,--enable-stdcall-fixup $(IMAGELDFLAGS) -ldxguid -lws2_32 -lwinmm -lgdi32 -lole32 -loleaut32 -luuid -lstdc++ -shared -Wl,--subsystem,windows NPFTE_CFLAGS=$(NPFTECFLAGS) $(W32_CFLAGS) -DMULTITHREAD NPFTEB_DIR=npfte_mgw$(BITS) MCL_OBJS=$(D3DGL_OBJS) $(GLQUAKE_OBJS) $(SOFTWARE_OBJS) $(D3DQUAKE_OBJS) $(BOTLIB_OBJS) $(SPEEX_OBJS) gl_vidnt.o $(WINDOWS_OBJS) M_EXE_NAME=../fteqw$(BITS)$(EXEPOSTFIX) MCL_EXE_NAME=../fteqwcl$(BITS)$(EXEPOSTFIX) M_LDFLAGS=$(GLLDFLAGS) $(IMAGELDFLAGS) $(OGGVORBISLDFLAGS) -ldxguid -lws2_32 -lwinmm -lgdi32 -lole32 -Wl,--subsystem,windows M_CFLAGS=$(GLCFLAGS) $(W32_CFLAGS) $(D3DCFLAGS) $(DX7SDK) -DMULTITHREAD -DLIBVORBISFILE_STATIC $(SPEEXCFLAGS) MB_DIR=m_mgw$(BITS) MCL_DIR=mcl_mgw$(BITS) D3DCL_OBJS=$(D3DQUAKE_OBJS) $(D3DGL_OBJS) $(SPEEX_OBJS) $(WINDOWS_OBJS) D3D_EXE_NAME=../fted3dqw$(BITS)$(EXEPOSTFIX) D3DCL_EXE_NAME=../fted3dclqw$(BITS)$(EXEPOSTFIX) D3D_LDFLAGS=$(IMAGELDFLAGS) $(OGGVORBISLDFLAGS) -ldxguid -lws2_32 -lwinmm -lgdi32 -lole32 -Wl,--subsystem,windows D3D_CFLAGS=$(D3DCFLAGS) $(W32_CFLAGS) $(DX7SDK) -DMULTITHREAD -DLIBVORBISFILE_STATIC $(SPEEXCFLAGS) D3DB_DIR=d3d_mgw$(BITS) D3DCL_DIR=d3dcl_mgw$(BITS) MINGL_EXE_NAME=../fteminglqw$(BITS)$(EXEPOSTFIX) MINGL_DIR=mingl_mgw$(BITS) ifeq ($(NOCOMPAT),1) SV_EXE_NAME=../engine_sv$(BITS)$(EXEPOSTFIX) GL_EXE_NAME=../engine_gl$(BITS)$(EXEPOSTFIX) M_EXE_NAME=../engine$(BITS)$(EXEPOSTFIX) D3D_EXE_NAME=../engine_d3d$(BITS)$(EXEPOSTFIX) MINGL_EXE_NAME=../engine_cl_gl$(BITS)$(EXEPOSTFIX) endif endif ifeq ($(FTE_TARGET),bsd) #mostly uses the linux stuff. #oss, X, etc. SV_DIR=sv_linux SV_LDFLAGS=-lz -ldl GLCL_OBJS=$(GL_OBJS) $(D3DGL_OBJS) $(GLQUAKE_OBJS) $(BOTLIB_OBJS) gl_vidlinuxglx.o snd_linux.o cd_null.o sys_linux.o sys_linux_threads.o GL_EXE_NAME=../fteqw.gl GLCL_EXE_NAME=../fteqwcl.gl GL_LDFLAGS= -L/usr/local/lib $(GLLDFLAGS) $(XLDFLAGS) -lpthread GL_CFLAGS=$(GLCFLAGS) -I/usr/local/include -I/usr/X11R6/include GLB_DIR=gl_bsd GLCL_DIR=glcl_bsd MCL_OBJS=$(D3DGL_OBJS) $(GLQUAKE_OBJS) $(SOFTWARE_OBJS) $(BOTLIB_OBJS) gl_vidlinuxglx.o snd_linux.o cd_null.o sys_linux.o sys_linux_threads.o M_EXE_NAME=../fteqw MCL_EXE_NAME=../fteqwcl M_LDFLAGS=$(GLLDFLAGS) $(XLDFLAGS) -lpthread M_CFLAGS=$(GLCFLAGS) -I/usr/X11R6/include MB_DIR=m_bsd MCL_DIR=mcl_bsd MINGL_EXE_NAME=../fteqw.mingl MINGL_DIR=mingl_bsd endif ifneq (,$(findstring linux,$(FTE_TARGET))) SV_DIR=sv_linux$(BITS) SV_EXE_NAME=../fteqw.sv$(BITS) SV_LDFLAGS= NPFTE_OBJS=httpclient.o image.o sys_linux_threads.o sys_npfte.o sys_axfte.o sys_plugfte.o NPFTE_DLL_NAME=../npfte$(BITS).so NPFTE_LDFLAGS=-shared -Wl,-z,defs -ldl -lpthread NPFTE_CFLAGS=$(NPFTECFLAGS) $(W32_CFLAGS) -DMULTITHREAD -fPIC -DDYNAMIC_LIBPNG -DDYNAMIC_LIBJPEG NPFTEB_DIR=npfte_linux$(BITS) GLCL_OBJS=$(GL_OBJS) $(D3DGL_OBJS) $(GLQUAKE_OBJS) $(BOTLIB_OBJS) $(SPEEX_OBJS) gl_vidlinuxglx.o gl_videgl.o snd_alsa.o snd_linux.o snd_sdl.o cd_linux.o sys_linux.o sys_linux_threads.o GL_EXE_NAME=../fteqw.gl$(BITS) GLCL_EXE_NAME=../fteqwcl.gl$(BITS) GL_LDFLAGS=$(GLLDFLAGS) $(XLDFLAGS) $(OGGVORBISLDFLAGS) GL_CFLAGS=$(GLCFLAGS) -I/usr/X11R6/include $(SPEEXCFLAGS) -DMULTITHREAD -DLIBVORBISFILE_STATIC -DDYNAMIC_LIBPNG -DDYNAMIC_LIBJPEG -DDYNAMIC_SDL GLB_DIR=gl_linux$(BITS) GLCL_DIR=glcl_linux$(BITS) MCL_OBJS=$(D3DGL_OBJS) $(GLQUAKE_OBJS) $(SOFTWARE_OBJS) $(BOTLIB_OBJS) $(SPEEX_OBJS) gl_vidlinuxglx.o gl_videgl.o snd_linux.o snd_sdl.o snd_alsa.o cd_linux.o sys_linux.o sys_linux_threads.o M_EXE_NAME=../fteqw$(BITS) MCL_EXE_NAME=../fteqwcl$(BITS) M_LDFLAGS=$(GL_LDFLAGS) M_CFLAGS=$(GL_CFLAGS) MB_DIR=m_linux$(BITS) MCL_DIR=mcl_linux$(BITS) IMAGELDFLAGS= ifeq (,$(findstring NO_ZLIB,$(CFLAGS))) SV_LDFLAGS+= -lz GL_LDFLAGS+= -lz M_LDFLAGS+= -lz endif MINGL_EXE_NAME=../fteqw.mingl$(BITS) MINGL_DIR=mingl_linux$(BITS) endif ifneq (,$(findstring rpi,$(FTE_TARGET))) #These next two lines enable cross compiling. If you're compiling natively you can just kill the two. RPI_SYSROOT:=$(realpath $(shell echo ~)/rpi/rpi-sysroot/) CC=~/rpi/tools/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian/bin/arm-linux-gnueabihf-gcc --sysroot=$(RPI_SYSROOT) SDLCONFIG=$(RPI_SYSROOT)/usr/bin/sdl-config --prefix=$(RPI_SYSROOT)/usr GL_CFLAGS+= -I$(RPI_SYSROOT)/opt/vc/include -I$(RPI_SYSROOT)/opt/vc/include/interface/vmcs_host/linux -I$(RPI_SYSROOT)/opt/vc/include/interface/vcos/pthreads -DFTE_RPI -DUSE_EGL GL_LDFLAGS+= -L$(RPI_SYSROOT)/opt/vc/lib -Wl,--sysroot=$(RPI_SYSROOT),-rpath=/opt/vc/lib,-rpath-link=$(RPI_SYSROOT)/opt/vc/lib -lbcm_host GLCL_OBJS+=gl_vidrpi.o endif ifneq (,$(findstring wayland,$(FTE_TARGET))) GL_CFLAGS+=-DUSE_EGL GLCL_OBJS+=gl_vidwayland.o GL_LDFLAGS+=-lwayland-client -lwayland-egl endif ifneq (,$(findstring fbdev,$(FTE_TARGET))) GL_CFLAGS+=-DUSE_EGL GLCL_OBJS+=gl_vidfbdev.o endif ifneq ($(shell echo $(FTE_TARGET)|grep macosx),) SV_DIR=sv_macosx$(EXTENSION)$(BITS) GLB_DIR=gl_macosx$(EXTENSION)$(BITS) GLCL_DIR=glcl_macosx$(EXTENSION)$(BITS) MINGL_DIR=mingl_macosx$(EXTENSION)$(BITS) OGGVORBISLDFLAGS= GL_CFLAGS=$(GLCFLAGS) -D__MACOSX__ -L/sw/lib -I/sw/include -L/opt/local/lib -I/opt/local/include -I$(LIBS_DIR) ifeq ($(FTE_TARGET),macosx_x86) GL_CFLAGS=$(GLCFLAGS) -D__MACOSX__ -L/sw/lib -I/sw/include -L/opt/local/lib -I/opt/local/include -I$(LIBS_DIR) endif GL_LDFLAGS=-framework AGL -framework OpenGL -framework Cocoa -framework AudioUnit -lz -lpng -ljpeg GLCL_OBJS=$(GL_OBJS) $(D3DGL_OBJS) $(GLQUAKE_OBJS) gl_vidcocoa.mo gl_vidmacos.o sys_linux.o cd_null.o snd_macos.o sys_linux_threads.o GL_EXE_NAME=../macosx_fteqw.gl$(EXTENSION)$(BITS) GLCL_EXE_NAME=../macosx_fteqwcl.gl$(EXTENSION)$(BITS) M_EXE_NAME=../macosx_fteqw$(EXTENSION)$(BITS) MCL_EXE_NAME=../macosx_fteqwcl$(EXTENSION)$(BITS) MINGL_EXE_NAME=../macosx_fteqw.mingl$(EXTENSION)$(BITS) MINGL_DIR=mingl_macosx$(EXTENSION)$(BITS) SV_OBJS=$(COMMON_OBJS) $(SERVER_OBJS) $(PROGS_OBJS) $(SERVERONLY_OBJS) SV_EXE_NAME=../macosx_fteqw.sv$(EXTENSION)$(BITS) SV_CFLAGS=$(SERVER_ONLY_CFLAGS) SV_LDFLAGS=-lz #seems, macosx has a more limited version of strip STRIPFLAGS= endif ifeq ($(FTE_TARGET),morphos) #-Wno-pointer-sign unrecognised WARNINGFLAGS=-Wall CFLAGS+=-D__MORPHOS_SHAREDLIBS SV_DIR=sv_morphos SV_LDFLAGS=-ldl -lz OGGVORBISLDFLAGS= GLCL_OBJS=$(GL_OBJS) $(D3DGL_OBJS) $(GLQUAKE_OBJS) $(BOTLIB_OBJS) gl_vidmorphos.o in_morphos.o snd_morphos.o cd_null.o sys_morphos.o GL_EXE_NAME=../morphos_fteqw.gl GLCL_EXE_NAME=../morphos_fteqwcl.gl GL_LDFLAGS=$(GLLDFLAGS) -ldl $(IMAGELDFLAGS) -lz GL_CFLAGS=$(GLCFLAGS) -noixemul -I./libs/speex -I./ GLB_DIR=gl_morphos GLCL_DIR=glcl_morphos MCL_OBJS=$(D3DGL_OBJS) $(GLQUAKE_OBJS) $(SOFTWARE_OBJS) $(BOTLIB_OBJS) gl_vidmorphos.o vid_morphos.o in_morphos.o snd_morphos.o cd_null.o sys_morphos.o M_EXE_NAME=../morphos_fteqw MCL_EXE_NAME=../morphos_fteqwcl M_LDFLAGS=$(GLLDFLAGS) M_CFLAGS=$(GLCFLAGS) MB_DIR=m_morphos MCL_DIR=mcl_morphos MINGL_EXE_NAME=../morphos_fteqw.mingl MINGL_DIR=mingl_morphos SV_OBJS=$(COMMON_OBJS) $(SERVER_OBJS) $(PROGS_OBJS) $(SERVERONLY_OBJS) $(BOTLIB_OBJS) SV_EXE_NAME=../morphos_fteqw.sv$(BITS) SV_CFLAGS=$(SERVER_ONLY_CFLAGS) endif ifeq ($(FTE_TARGET),cygwin) SV_DIR=sv_cygwin SV_LDFLAGS=-lz EXEPOSTFIX=.exe GLCL_OBJS=$(GL_OBJS) $(D3DGL_OBJS) $(GLQUAKE_OBJS) $(BOTLIB_OBJS) $(SPEEX_OBJS) gl_vidlinuxglx.o snd_linux.o cd_null.o sys_linux.o sys_linux_threads.o GL_EXE_NAME=../fteqwglcyg$(EXEPOSTFIX) GLCL_EXE_NAME=../fteqwclglcyg$(EXEPOSTFIX) GL_LDFLAGS=$(GLLDFLAGS) $(XLDFLAGS) $(OGGVORBISLDFLAGS) -lz -lltdl GL_CFLAGS=$(GLCFLAGS) -I/usr/X11R6/include $(SPEEXCFLAGS) -DLIBVORBISFILE_STATIC -DUSE_LIBTOOL GLB_DIR=gl_cygwin GLCL_DIR=glcl_cygwin MCL_OBJS=$(D3DGL_OBJS) $(GLQUAKE_OBJS) $(SOFTWARE_OBJS) $(BOTLIB_OBJS) $(SPEEX_OBJS) gl_vidlinuxglx.o snd_linux.o cd_null.o sys_linux.o sys_linux_threads.o M_EXE_NAME=../fteqwcyg$(EXEPOSTFIX) MCL_EXE_NAME=../fteqwclcyg$(EXEPOSTFIX) M_LDFLAGS=$(GLLDFLAGS) $(XLDFLAGS) $(OGGVORBISLDFLAGS) -lz -lltdl M_CFLAGS=$(GLCFLAGS) $(SPEEXCFLAGS) -DLIBVORBISFILE_STATIC -DUSE_LIBTOOL MB_DIR=m_cygwin MCL_DIR=mcl_cygwin LIBS_DIR = $(BASE_DIR)/libs MINGL_EXE_NAME=../fteqwminglcyg$(EXEPOSTFIX) MINGL_DIR=mingl_cygwin endif ifeq ($(FTE_TARGET),droid) BASELDFLAGS= SV_CFLAGS= SV_LDFLAGS= SV_DIR=sv_droid-$(DROID_ARCH) SV_OBJS=$(COMMON_OBJS) $(SERVER_OBJS) $(PROGS_OBJS) $(BOTLIB_OBJS) sys_droid.o SV_EXE_NAME=libftedroid.so GL_CFLAGS=$(GLCFLAGS) GL_LDFLAGS=$(GLLDFLAGS) GLCL_OBJS=$(GL_OBJS) $(D3DGL_OBJS) $(GLQUAKE_OBJS) $(BOTLIB_OBJS) gl_viddroid.o sys_droid.o cd_null.o snd_droid.o GLB_DIR=gl_droid-$(DROID_ARCH) GL_EXE_NAME=libftedroid.so endif ifeq ($(FTE_TARGET),web) COMMON_OBJS+=sys_web.o fs_web.o WEB_PREJS ?= --pre-js web/prejs.js # WEB_MEMORY?=402653184 #384mb # ASMJS_MEMORY?=16777216 #16mb # ASMJS_MEMORY?=33554432 #32mb ASMJS_MEMORY?=268435456 #256mb # ASMJS_MEMORY?=536870912 #512mb # ASMJS_MEMORY?=1073741824 #1025mb # ASMJS_MEMORY?=2147483648 #2048mb WEB_MEMORY?=$(ASMJS_MEMORY) JSLIBS=--js-library web/ftejslib.js -s LEGACY_GL_EMULATION=0 EMCC_ARGS=$(JSLIBS) $(WEB_PREJS) -s ERROR_ON_UNDEFINED_SYMBOLS=1 RELEASE_CFLAGS=-DOMIT_QCC -DGL_STATIC -DFTE_TARGET_WEB DEBUG_CFLAGS=-g -DOMIT_QCC -DGL_STATIC -DFTE_TARGET_WEB RELEASE_LDFLAGS=-s ASM_JS=1 -O3 -s TOTAL_MEMORY=$(ASMJS_MEMORY) $(EMCC_ARGS) # RELEASE_LDFLAGS=-s ASM_JS=0 -O1 -s TOTAL_MEMORY=$(WEB_MEMORY) $(EMCC_ARGS) DEBUG_LDFLAGS=-O0 -g4 -s TOTAL_MEMORY=$(WEB_MEMORY) $(EMCC_ARGS) CC?=emcc #BASELDFLAGS= PRECOMPHEADERS= #mostly we inherit the sdl defaults. because we can, however emscripten does not support sdl cd code. GLCL_OBJS=$(GL_OBJS) $(D3DGL_OBJS) $(GLQUAKE_OBJS) gl_vidweb.o cd_null.o SDL_INCLUDES= SV_DIR=sv_web #SV_LDFLAGS=-lz #SV_OBJS=$(COMMON_OBJS) $(SERVER_OBJS) $(PROGS_OBJS) SV_EXE_NAME=../libftesv.js #SV_LDFLAGS= STRIP=echo SPEEXCFLAGS= SPEEX_OBS= #GLCL_OBJS=$(GL_OBJS) $(D3DGL_OBJS) $(GLQUAKE_OBJS) cd_null.o #GL_LDFLAGS=$(GLLDFLAGS) GLB_DIR=gl_web GL_EXE_NAME=../ftewebgl.js GL_LDFLAGS=$(GLLDFLAGS) $(IMAGELDFLAGS) $(OGGVORBISLDFLAGS) GL_CFLAGS=$(GLCFLAGS) IMAGELDFLAGS= OGGVORBISLDFLAGS= BOTLIB_CFLAGS= #generate deps properly #DEPCC= endif SV_DIR?=sv_sdl DEPCC?=$(CC) -include Makefile_private .default: help all: rel rel: sv-rel gl-rel mingl-rel dbg: sv-dbg gl-dbg mingl-dbg relcl: glcl-rel mcl-rel profile: sv-profile gl-profile mingl-profile releases: #this is for releasing things from a linux box #just go through compiling absolutly everything -$(MAKE) FTE_TARGET=linux32 rel -$(MAKE) FTE_TARGET=linux64 rel -$(MAKE) FTE_TARGET=win32 rel -$(MAKE) FTE_TARGET=win64 rel -$(MAKE) FTE_TARGET=win32_SDL rel -$(MAKE) FTE_TARGET=win64_SDL rel -$(MAKE) FTE_TARGET=morphos rel -$(MAKE) FTE_TARGET=macosx rel # -$(MAKE) FTE_TARGET=linux32 relcl # -$(MAKE) FTE_TARGET=linux64 relcl # -$(MAKE) FTE_TARGET=win32 relcl -$(MAKE) droid-rel -$(MAKE) web-rel -$(MAKE) FTE_TARGET=win32 npfte-rel autoconfig: clean /bin/bash makeconfig.sh y config: clean /bin/bash makeconfig.sh ifneq ($(OUT_DIR),) -include $(OUT_DIR)/*.o.d endif VPATH = $(BASE_DIR) : $(CLIENT_DIR) : $(GL_DIR) : $(COMMON_DIR) : $(SERVER_DIR) : $(HTTP_DIR) : $(BASE_DIR)/irc : $(BASE_DIR)/email : $(QUX_DIR) : $(PROGS_DIR) : $(NACL_DIR) : $(D3D_DIR) : $(BOTLIB_DIR) : $(BASE_DIR)/libs/speex/libspeex : $(BASE_DIR)/web ifneq ($(findstring -DSPEEX_STATIC, $(CFLAGS)),) #add these to statically link libspeex BASE_CFLAGS += $(SPEEXCFLAGS) CLIENT_OBJS += $(SPEEX_OBJS) endif # This is for linking the FTE icon to the MinGW target $(OUT_DIR)/resources.o : winquake.rc @$(WINDRES) $(BRANDFLAGS) -I$(CLIENT_DIR) -O coff $< $@ #npAPI stuff requires some extra resources $(OUT_DIR)/npplug.o : ftequake/npplug.rc @$(WINDRES) $(BRANDFLAGS) -I$(CLIENT_DIR) -O coff $< $@ #$(OUT_DIR)/%.d: %.c # @set -e; rm -f $@; \ # $(CC) -MM $(ALL_CFLAGS) $< > $@.$$$$; \ # sed 's,\($*\)\.o[ :]*,\1.o $@ : ,g' < $@.$$$$ > $@; \ # rm -f $@.$$$$ $(OUT_DIR)/%.o $(OUT_DIR)/%.d : %.c ifneq ($(DEPCC),) @-set -e; rm -f $@.d; \ $(DEPCC) -MM $(ALL_CFLAGS) $< > $@.d.$$$$; \ sed 's,\($*\)\.o[ :]*,$@ $@.d : ,g' < $@.d.$$$$ > $@.d; \ sed -e 's/.*://' -e 's/\\$$//' < $@.d.$$$$ | fmt -1 | sed -e 's/^ *//' -e 's/$$/:/' >> $@.d; \ rm -f $@.d.$$$$ endif $(DO_CC) -I$(OUT_DIR) $(OUT_DIR)/%.o $(OUT_DIR)/%.d : %.cpp ifneq ($(DEPCC),) @-set -e; rm -f $@.d; \ $(DEPCC) -MM $(ALL_CFLAGS) $< > $@.d.$$$$; \ sed 's,\($*\)\.o[ :]*,$@ $@.d : ,g' < $@.d.$$$$ > $@.d; \ sed -e 's/.*://' -e 's/\\$$//' < $@.d.$$$$ | fmt -1 | sed -e 's/^ *//' -e 's/$$/:/' >> $@.d; \ rm -f $@.d.$$$$ endif $(DO_CC) -I$(OUT_DIR) $(OUT_DIR)/%.o $(OUT_DIR)/%.d : %.cxx ifneq ($(DEPCC),) @-set -e; rm -f $@.d; \ $(DEPCC) -MM $(ALL_CFLAGS) $< > $@.d.$$$$; \ sed 's,\($*\)\.o[ :]*,$@ $@.d : ,g' < $@.d.$$$$ > $@.d; \ sed -e 's/.*://' -e 's/\\$$//' < $@.d.$$$$ | fmt -1 | sed -e 's/^ *//' -e 's/$$/:/' >> $@.d; \ rm -f $@.d.$$$$ endif $(DO_CC) -I$(OUT_DIR) $(OUT_DIR)/%.oo $(OUT_DIR)/%.d : %.c ifneq ($(DEPCC),) @-set -e; rm -f $@.d; \ $(DEPCC) -MM $(ALL_CFLAGS) $< > $@.d.$$$$; \ sed 's,\($*\)\.oo[ :]*,$@ $@.d : ,g' < $@.d.$$$$ > $@.d; \ sed -e 's/.*://' -e 's/\\$$//' < $@.d.$$$$ | fmt -1 | sed -e 's/^ *//' -e 's/$$/:/' >> $@.d; \ rm -f $@.d.$$$$ endif $(DO_CC) -I$(OUT_DIR) $(OUT_DIR)/%.mo $(OUT_DIR)/%.d : %.m @-set -e; rm -f $@.d; \ $(DEPCC) -MM $(ALL_CFLAGS) $< > $@.d.$$$$; \ sed 's,\($*\)\.mo[ :]*,$@ $@.d : ,g' < $@.d.$$$$ > $@.d; \ sed -e 's/.*://' -e 's/\\$$//' < $@.d.$$$$ | fmt -1 | sed -e 's/^ *//' -e 's/$$/:/' >> $@.d; \ rm -f $@.d.$$$$ $(DO_CC) -I$(OUT_DIR) #enables use of precompiled headers in gcc 3.4 onwards. $(OUT_DIR)/quakedef.h.gch : quakedef.h $(CC) -x c $(ALL_CFLAGS) -o $@ -c $< PRECOMPHEADERS ?= $(OUT_DIR)/quakedef.h.gch #addprefix is to add the ./release/server/ part of the object name #foreach is needed as the OBJS is a list of variable names containing object lists. #which is needed as windows sucks too much for the chaining to carry a full list. #god knows how gcc loads the list properly. #or at least I hope he does. It makes no sence to mortals. DO_LD ?= $(DO_ECHO) $(CC) -o $@ $(LTO_LD) $(WCFLAGS) $(BRANDFLAGS) $(CFLAGS) $(OUT_DIR)/$(EXE_NAME): $(PRECOMPHEADERS) $(foreach fn, $(CUSTOMOBJS) $(foreach ol, $(OBJS), $($(ol))),$(if $(findstring ltox,$(fn)),,$(OUT_DIR)/$(fn))) $(DO_LD) $(foreach fn, $(CUSTOMOBJS) $(foreach ol, $(OBJS) $(LTO_END), $($(ol))),$(if $(findstring ltox,$(fn)),$(subst ltox,-x ,$(fn)),$(NATIVE_OUT_DIR)/$(fn)) ) $(LDFLAGS) _out-rel: $(ARCH_PREDEP) @$(MAKE) $(OUT_DIR)/$(EXE_NAME) EXE_NAME="$(EXE_NAME)" OUT_DIR="$(OUT_DIR)" WCFLAGS="$(WCFLAGS) $(RELEASE_CFLAGS)" LDFLAGS="$(BASELDFLAGS) $(LDFLAGS) $(RELEASE_LDFLAGS)" OBJS="$(OBJS)" $(STRIP) $(STRIPFLAGS) $(OUT_DIR)/$(EXE_NAME) _out-dbg: $(ARCH_PREDEP) @$(MAKE) $(OUT_DIR)/$(EXE_NAME) EXE_NAME="$(EXE_NAME)" OUT_DIR="$(OUT_DIR)" WCFLAGS="$(WCFLAGS) $(DEBUG_CFLAGS)" LDFLAGS="$(BASELDFLAGS) $(LDFLAGS) $(DEBUG_LDFLAGS)" OBJS="$(OBJS)" _out-profile: $(ARCH_PREDEP) @$(MAKE) $(OUT_DIR)/$(EXE_NAME) EXE_NAME="$(EXE_NAME)" OUT_DIR="$(OUT_DIR)" WCFLAGS="$(WCFLAGS) $(PROFILE_CFLAGS)" LDFLAGS="$(BASELDFLAGS) $(LDFLAGS) $(PROFILE_LDFLAGS)" OBJS="$(OBJS)" _cl-rel: reldir @$(MAKE) _out-rel EXE_NAME="$(EXE_NAME)" OUT_DIR="$(OUT_DIR)" WCFLAGS="$(CLIENT_ONLY_CFLAGS) $(WCFLAGS)" LDFLAGS="$(LDFLAGS)" SOBJS="$(SOBJS)" OBJS="SOBJS COMMON_OBJS CLIENT_OBJS PROGS_OBJS" _cl-dbg: debugdir @$(MAKE) _out-dbg EXE_NAME="$(EXE_NAME)" OUT_DIR="$(OUT_DIR)" WCFLAGS="$(CLIENT_ONLY_CFLAGS) $(WCFLAGS)" LDFLAGS="$(LDFLAGS)" SOBJS="$(SOBJS)" OBJS="SOBJS COMMON_OBJS CLIENT_OBJS PROGS_OBJS" _cl-profile: reldir @$(MAKE) _out-profile EXE_NAME="$(EXE_NAME)" OUT_DIR="$(OUT_DIR)" WCFLAGS="$(CLIENT_ONLY_CFLAGS) $(WCFLAGS)" LDFLAGS="$(LDFLAGS)" SOBJS="$(SOBJS)" OBJS="SOBJS COMMON_OBJS CLIENT_OBJS PROGS_OBJS" _clsv-rel: reldir @$(MAKE) _out-rel EXE_NAME="$(EXE_NAME)" OUT_DIR="$(OUT_DIR)" WCFLAGS="$(JOINT_CFLAGS) $(WCFLAGS)" LDFLAGS="$(LDFLAGS)" SOBJS="$(SOBJS)" OBJS="SOBJS COMMON_OBJS CLIENT_OBJS PROGS_OBJS SERVER_OBJS" _clsv-dbg: debugdir @$(MAKE) _out-dbg EXE_NAME="$(EXE_NAME)" OUT_DIR="$(OUT_DIR)" WCFLAGS="$(JOINT_CFLAGS) $(WCFLAGS)" LDFLAGS="$(LDFLAGS)" SOBJS="$(SOBJS)" OBJS="SOBJS COMMON_OBJS CLIENT_OBJS PROGS_OBJS SERVER_OBJS" _clsv-profile: reldir @$(MAKE) _out-profile EXE_NAME="$(EXE_NAME)" OUT_DIR="$(OUT_DIR)" WCFLAGS="$(JOINT_CFLAGS) $(WCFLAGS)" LDFLAGS="$(LDFLAGS)" SOBJS="$(SOBJS)" OBJS="SOBJS COMMON_OBJS CLIENT_OBJS PROGS_OBJS SERVER_OBJS" sv-tmp: reldir debugdir @$(MAKE) $(TYPE) OUT_DIR="$(OUT_DIR)" EXE_NAME="$(SV_EXE_NAME)" WCFLAGS="$(SV_CFLAGS)" LDFLAGS="$(SV_LDFLAGS) $(LDFLAGS)" OBJS="SV_OBJS" sv-rel: @$(MAKE) sv-tmp TYPE=_out-rel OUT_DIR="$(RELEASE_DIR)/$(SV_DIR)" sv-dbg: @$(MAKE) sv-tmp TYPE=_out-dbg OUT_DIR="$(DEBUG_DIR)/$(SV_DIR)" sv-profile: @$(MAKE) sv-tmp TYPE=_out-profile OUT_DIR="$(PROFILE_DIR)/$(SV_DIR)" d3dcl-tmp: @$(MAKE) $(TYPE) OUT_DIR="$(OUT_DIR)" EXE_NAME="$(D3DCL_EXE_NAME)" WCFLAGS="$(D3D_CFLAGS)" LDFLAGS="$(D3D_LDFLAGS) $(LDFLAGS)" SOBJS="$(D3DCL_OBJS)" d3d-tmp: @$(MAKE) $(TYPE) OUT_DIR="$(OUT_DIR)" EXE_NAME="$(D3D_EXE_NAME)" WCFLAGS="$(D3D_CFLAGS)" LDFLAGS="$(D3D_LDFLAGS) $(LDFLAGS)" SOBJS="$(D3DCL_OBJS)" d3dcl-rel: @$(MAKE) d3dcl-tmp TYPE=_cl-rel OUT_DIR="$(RELEASE_DIR)/$(D3DCL_DIR)" d3dcl-dbg: @$(MAKE) d3dcl-tmp TYPE=_cl-dbg OUT_DIR="$(DEBUG_DIR)/$(D3DCL_DIR)" d3dcl-profile: @$(MAKE) d3dcl-tmp TYPE=_cl-profile OUT_DIR="$(PROFILE_DIR)/$(D3DCL_DIR)" d3d-rel: @$(MAKE) d3d-tmp TYPE=_clsv-rel OUT_DIR="$(RELEASE_DIR)/$(D3DB_DIR)" d3d-dbg: @$(MAKE) d3d-tmp TYPE=_clsv-dbg OUT_DIR="$(DEBUG_DIR)/$(D3DB_DIR)" d3d-profile: @$(MAKE) d3d-tmp TYPE=_clsv-profile OUT_DIR="$(PROFILE_DIR)/$(D3DB_DIR)" glcl-tmp: @$(MAKE) $(TYPE) OUT_DIR="$(OUT_DIR)" EXE_NAME="$(GLCL_EXE_NAME)" WCFLAGS="$(GL_CFLAGS)" LDFLAGS="$(GL_LDFLAGS) $(LDFLAGS)" SOBJS="$(GLCL_OBJS)" gl-tmp: @$(MAKE) $(TYPE) OUT_DIR="$(OUT_DIR)" EXE_NAME="$(GL_EXE_NAME)" WCFLAGS="$(GL_CFLAGS)" LDFLAGS="$(GL_LDFLAGS) $(LDFLAGS)" SOBJS="$(GLCL_OBJS)" glcl-rel: @$(MAKE) glcl-tmp TYPE=_cl-rel OUT_DIR="$(RELEASE_DIR)/$(GLCL_DIR)" glcl-dbg: @$(MAKE) glcl-tmp TYPE=_cl-dbg OUT_DIR="$(DEBUG_DIR)/$(GLCL_DIR)" glcl-profile: @$(MAKE) glcl-tmp TYPE=_cl-profile OUT_DIR="$(PROFILE_DIR)/$(GLCL_DIR)" gl-rel: @$(MAKE) gl-tmp TYPE=_clsv-rel OUT_DIR="$(RELEASE_DIR)/$(GLB_DIR)" gl-dbg: @$(MAKE) gl-tmp TYPE=_clsv-dbg OUT_DIR="$(DEBUG_DIR)/$(GLB_DIR)" gl-profile: @$(MAKE) gl-tmp TYPE=_clsv-profile OUT_DIR="$(PROFILE_DIR)/$(GLB_DIR)" mingl-tmp: reldir @$(MAKE) $(TYPE) OUT_DIR="$(OUT_DIR)" EXE_NAME="$(MINGL_EXE_NAME)" WCFLAGS="$(GL_CFLAGS) -DMINIMAL" LDFLAGS="$(GL_LDFLAGS) $(LDFLAGS)" SOBJS="$(GLCL_OBJS)" mingl-rel: @$(MAKE) mingl-tmp TYPE=_cl-rel OUT_DIR="$(RELEASE_DIR)/$(MINGL_DIR)" mingl-dbg: @$(MAKE) mingl-tmp TYPE=_cl-dbg OUT_DIR="$(DEBUG_DIR)/$(MINGL_DIR)" mingl-profile: @$(MAKE) mingl-tmp TYPE=_cl-profile OUT_DIR="$(PROFILE_DIR)/$(MINGL_DIR)" mcl-tmp: @$(MAKE) $(TYPE) OUT_DIR="$(OUT_DIR)" EXE_NAME="$(MCL_EXE_NAME)" WCFLAGS="$(M_CFLAGS)" LDFLAGS="$(M_LDFLAGS) $(LDFLAGS)" SOBJS="$(MCL_OBJS)" m-tmp: @$(MAKE) $(TYPE) OUT_DIR="$(OUT_DIR)" EXE_NAME="$(M_EXE_NAME)" WCFLAGS="$(M_CFLAGS)" LDFLAGS="$(M_LDFLAGS) $(LDFLAGS)" SOBJS="$(MCL_OBJS)" mcl-rel: @$(MAKE) mcl-tmp TYPE=_cl-rel OUT_DIR="$(RELEASE_DIR)/$(MCL_DIR)" mcl-dbg: @$(MAKE) mcl-tmp TYPE=_cl-dbg OUT_DIR="$(DEBUG_DIR)/$(MCL_DIR)" mcl-profile: @$(MAKE) mcl-tmp TYPE=_cl-profile OUT_DIR="$(PROFILE_DIR)/$(MCL_DIR)" m-rel: @$(MAKE) m-tmp TYPE=_clsv-rel OUT_DIR="$(RELEASE_DIR)/$(MB_DIR)" m-dbg: @$(MAKE) m-tmp TYPE=_clsv-dbg OUT_DIR="$(DEBUG_DIR)/$(MB_DIR)" m-profile: @$(MAKE) m-tmp TYPE=_clsv-profile OUT_DIR="$(PROFILE_DIR)/$(MB_DIR)" .PHONY: m-tmp mcl-tmp mingl-tmp glcl-tmp gl-tmp sv-tmp _clsv-dbg _clsv-rel _cl-dbg _cl-rel _out-rel _out-dbg reldir debugdir makelibs _qcc-tmp: $(REQDIR) @$(MAKE) $(TYPE) EXE_NAME="$(EXE_NAME)$(EXEPOSTFIX)" PRECOMPHEADERS="" OUT_DIR="$(OUT_DIR)" WCFLAGS="$(CLIENT_ONLY_CFLAGS) $(WCFLAGS)" LDFLAGS="$(LDFLAGS)" OBJS="QCC_OBJS SOBJS" qcc-rel: @$(MAKE) _qcc-tmp TYPE=_out-rel REQDIR=reldir EXE_NAME="../fteqcc" OUT_DIR="$(RELEASE_DIR)/qcc" SOBJS="qcctui.o" qccgui-rel: @$(MAKE) _qcc-tmp TYPE=_out-rel REQDIR=reldir EXE_NAME="../fteqccgui" OUT_DIR="$(RELEASE_DIR)/qcc" SOBJS="qccgui.o qccguistuff.o" LDFLAGS="$(LDFLAGS) -lole32 -lcomdlg32 -lcomctl32 -lshlwapi -mwindows" qcc-dbg: @$(MAKE) _qcc-tmp TYPE=_out-dbg REQDIR=debugdir EXE_NAME="../fteqcc" OUT_DIR="$(DEBUG_DIR)/qcc" SOBJS="qcctui.o" qccgui-dbg: @$(MAKE) _qcc-tmp TYPE=_out-dbg REQDIR=debugdir EXE_NAME="../fteqccgui" OUT_DIR="$(DEBUG_DIR)/qcc" SOBJS="qccgui.o qccguistuff.o" LDFLAGS="$(LDFLAGS) -lole32 -lcomdlg32 -lcomctl32 -lshlwapi -mwindows" #scintilla is messy as fuck when building statically. but at least we can strip out the lexers we don't use this way. #note that this is only used in the 'qccgui-scintilla' target. SCINTILLAVER=352 SCINTILLA_FILES= AutoComplete.o CallTip.o CaseConvert.o CaseFolder.o CellBuffer.o CharacterCategory.o CharacterSet.o CharClassify.o ContractionState.o Decoration.o Document.o EditModel.o Editor.o EditView.o KeyMap.o Indicator.o LineMarker.o MarginView.o PerLine.o PlatWin.o PositionCache.o PropSetSimple.o RESearch.o RunStyles.o Selection.o Style.o UniConversion.o ViewStyle.o XPM.o ScintillaWin.o ScintillaBase.o Accessor.o Catalogue.o ExternalLexer.o LexerBase.o LexerModule.o LexerSimple.o StyleContext.o WordList.o LexCPP.o SCINTILLA_ROOT=$(BASE_DIR)/scintilla$(SCINTILLAVER)/scintilla SCINTILLA_DIRS=$(SCINTILLA_ROOT)/lexers:$(SCINTILLA_ROOT)/lexlib:$(SCINTILLA_ROOT)/src:$(SCINTILLA_ROOT)/win32 SCINTILLA_INC=-I$(SCINTILLA_ROOT)/include -I$(SCINTILLA_ROOT)/lexlib -I$(SCINTILLA_ROOT)/win32 -I$(SCINTILLA_ROOT)/src $(RELEASE_DIR)/scintilla$(BITS).a: $(foreach f,$(SCINTILLA_FILES),$(OUT_DIR)/$(f)) $(AR) -r $@ $? $(AR) -s $@ scintilla$(BITS)_static: @test -f scintilla$(SCINTILLAVER).tar.gz || wget http://prdownloads.sourceforge.net/scintilla/scintilla$(SCINTILLAVER).tgz?download -O scintilla$(SCINTILLAVER).tar.gz -test -f $(SCINTILLA_ROOT) || (mkdir $(BASE_DIR)/scintilla$(SCINTILLAVER) && cd $(BASE_DIR)/scintilla$(SCINTILLAVER) && tar -xvzf ../scintilla$(SCINTILLAVER).tar.gz && cd scintilla && mv lexers/LexCPP.cxx . && rm lexers/Lex*.cxx && mv LexCPP.cxx lexers/ && cd scripts && python LexGen.py) @$(MAKE) reldir OUT_DIR=$(RELEASE_DIR)/qcc @$(MAKE) $(RELEASE_DIR)/scintilla$(BITS).a VPATH="$(SCINTILLA_DIRS)" CFLAGS="$(SCINTILLA_INC) -DDISABLE_D2D -DSTATIC_BUILD -DSCI_LEXER" OUT_DIR=$(RELEASE_DIR)/qcc WCFLAGS="$(WCFLAGS) -Os" qccgui-scintilla: scintilla$(BITS)_static @$(MAKE) _qcc-tmp TYPE=_out-rel REQDIR=reldir EXE_NAME="../fteqccgui" OUT_DIR="$(RELEASE_DIR)/qcc" SOBJS="qccgui.o qccguistuff.o" WCFLAGS="$(WCFLAGS) -DSCISTATIC" LDFLAGS="$(LDFLAGS) $(RELEASE_DIR)/scintilla$(BITS).a -static -luuid -lole32 -limm32 -lstdc++ -lcomdlg32 -lcomctl32 -lshlwapi -mwindows" ifdef windir debugdir: @-mkdir -p $(subst /,\, $(OUT_DIR)) reldir: @-mkdir -p $(subst /,\, $(OUT_DIR)) else reldir: @-mkdir -p $(RELEASE_DIR) @-mkdir -p $(OUT_DIR) debugdir: @-mkdir -p $(DEBUG_DIR) @-mkdir -p $(OUT_DIR) endif plugins-dbg: @if test -e ../plugins/Makefile; \ then $(MAKE) native -C ../plugins OUT_DIR="$(DEBUG_DIR)" CC="$(CC) $(W32_CFLAGS) $(DEBUG_CFLAGS)" BASE_CFLAGS="$(BASE_CFLAGS)" FTE_TARGET="$(FTE_TARGET)"; \ else echo no plugins directory installed; \ fi plugins: plugins-rel: @if test -e ../plugins/Makefile; \ then $(MAKE) native -C ../plugins OUT_DIR="$(RELEASE_DIR)" CC="$(CC) $(W32_CFLAGS) $(RELEASE_CFLAGS)" BASE_CFLAGS="$(BASE_CFLAGS)" FTE_TARGET="$(FTE_TARGET)"; \ else echo no plugins directory installed; \ fi plugins-rel: help: @-echo "Specfic targets:" @-echo "clean - removes all output (use make dirs afterwards)" @-echo "all - make all the targets possible" @-echo "rel - make the releases for the default system" @-echo "dbg - make the debug builds for the default system" @-echo "profile - make all the releases with profiling support for the default system" @-echo "" @-echo "Normal targets:" @-echo "(each of these targets must have the postfix -rel or -dbg)" @-echo "'sv-???' (Dedicated Server)" @-echo "'gl-???' (OpenGL rendering + Built-in Server)" @-echo "'m-???' (Merged client, OpenGL & D3D rendering + Dedicated server)" @-echo "'mingl-???' (Minimal featured OpenGL render)" @-echo "'d3d-???' (for windows builds)" @-echo "'mcl-???' (currently broken)" @-echo "'glcl-???' (currently broken)" @-echo "'droid-???' (cross compiles Android package)" @-echo "'web-???' (compiles javascript/emscripten page)" @-echo "'npfte-???' (cross compiles QuakeTV Firefox/Netscape browser plugin)" @-echo "'nacl-???' (cross compiles QuakeTV Firefox/Netscape browser plugin)" @-echo "" @-echo "Cross targets can be specified with FTE_TARGET=blah" @-echo "linux32, linux64 specify specific x86 archs" @-echo "SDL - Attempt to use sdl for the current target" @-echo "win32 - Mingw compile for win32" @-echo "vc - Attempts to use msvc8+ to compile. Note: uses profile guided optimisations. You must build+run the relevent profile target before a release target will compile properly. Debug doesn't care." @-echo "android, npfte, nacl targets explicitly cross compile, and should generally not be given an FTE_TARGET." clean: -rm -f -r $(RELEASE_DIR) -rm -f -r $(DEBUG_DIR) -rm -f -r $(PROFILE_DIR) -rm -f -r droid/bin -rm -f -r droid/gen -rm -f -r droid/libs -rm -f droid/default.properties -rm -f droid/local.properties -rm -f droid/proguard.cfg -rm -f droid/build.xml distclean: clean -rm -f droid/ftekeystore -rm -f -r libs/SDL2-2.0.1 ################################################# #npfte npfte-tmprel: reldir @$(MAKE) $(OUT_DIR)/$(EXE_NAME) OUT_DIR="$(OUT_DIR)" WCFLAGS="$(NPFTE_CFLAGS) $(RELEASE_CFLAGS)" LDFLAGS="$(NPFTE_LDFLAGS) $(LDFLAGS) $(RELEASE_LDFLAGS)" OBJS="NPFTE_OBJS" npfte-tmpdbg: debugdir @$(MAKE) $(OUT_DIR)/$(EXE_NAME) OUT_DIR="$(OUT_DIR)" WCFLAGS="$(NPFTE_CFLAGS) $(DEBUG_CFLAGS)" LDFLAGS="$(NPFTE_LDFLAGS) $(LDFLAGS) $(DEBUG_LDFLAGS)" OBJS="NPFTE_OBJS" npfte-rel: -@$(MAKE) npfte-tmprel OUT_DIR="$(RELEASE_DIR)/$(NPFTEB_DIR)w32" EXE_NAME="../npfte.dll" PRECOMPHEADERS="" FTE_TARGET=win32 -@$(MAKE) npfte-tmprel OUT_DIR="$(RELEASE_DIR)/$(NPFTEB_DIR)l32" EXE_NAME="../npfte32.so" PRECOMPHEADERS="" FTE_TARGET=linux32 -@$(MAKE) npfte-tmprel OUT_DIR="$(RELEASE_DIR)/$(NPFTEB_DIR)l64" EXE_NAME="../npfte64.so" PRECOMPHEADERS="" FTE_TARGET=linux64 -cp $(RELEASE_DIR)/npfte.dll npfte/plugins -cp $(RELEASE_DIR)/npfte32.so npfte/plugins -cp $(RELEASE_DIR)/npfte64.so npfte/plugins cd npfte && zip $(abspath $(RELEASE_DIR)/npfte.xpi) install.rdf plugins/npfte.dll plugins/npfte32.so plugins/npfte64.so rm -rf /tmp/npfte mkdir /tmp/npfte cp $(RELEASE_DIR)/npfte.dll /tmp/npfte cp ./npfte/manifest.json /tmp/npfte -cd $(RELEASE_DIR)/ && ../npfte/crxmake.sh /tmp/npfte ../npfte/chrome.pem rm -rf /tmp/npfte npfte-dbg: @$(MAKE) npfte-tmpdbg OUT_DIR="$(DEBUG_DIR)/$(NPFTEB_DIR)w32" EXE_NAME="../npfte.dll" PRECOMPHEADERS="" FTE_TARGET=win32 @$(MAKE) npfte-tmpdbg OUT_DIR="$(DEBUG_DIR)/$(NPFTEB_DIR)l32" EXE_NAME="../npfte32.so" PRECOMPHEADERS="" FTE_TARGET=linux32 @$(MAKE) npfte-tmpdbg OUT_DIR="$(DEBUG_DIR)/$(NPFTEB_DIR)l64" EXE_NAME="../npfte64.so" PRECOMPHEADERS="" FTE_TARGET=linux64 npfte-profile: @$(MAKE) npfte-tmp TYPE=_npfte-profile OUT_DIR="$(PROFILE_DIR)/$(NPFTEB_DIR)" ################################################# #nacl shortcut nacl-rel: @$(MAKE) gl-rel FTE_TARGET=nacl NARCH=x86_32 @$(MAKE) gl-rel FTE_TARGET=nacl NARCH=x86_64 @$(MAKE) gl-rel FTE_TARGET=nacl NARCH=arm @$(MAKE) gl-rel FTE_TARGET=nacl NARCH=pnacl nacl-dbg: @$(MAKE) gl-dbg FTE_TARGET=nacl NARCH=x86_32 @$(MAKE) gl-dbg FTE_TARGET=nacl NARCH=x86_64 @$(MAKE) gl-dbg FTE_TARGET=nacl NARCH=arm @$(MAKE) gl-dbg FTE_TARGET=nacl NARCH=pnacl ################################################# #webgl helpers #just adds some extra paths (WINDOWS HOST ONLY) #assumes you installed the emscripten 1.22.0 sdk to EMSCRIPTENROOT #if you have a different version installed, you will need to fix up the paths yourself (or just use fte_target explicitly yourself). EMSCRIPTENROOT?=C:/Games/tools/Emscripten EMSCRIPTENPATH=$(realpath $(EMSCRIPTENROOT)):$(realpath $(EMSCRIPTENROOT)/clang/e1.22.0_64bit):$(realpath $(EMSCRIPTENROOT)/node/0.10.17_64bit):$(realpath $(EMSCRIPTENROOT)/python/2.7.5.3_64bit):$(realpath $(EMSCRIPTENROOT)/emscripten/1.22.0):$(PATH) web-rel: @$(MAKE) gl-rel FTE_TARGET=web PATH="$(EMSCRIPTENPATH)" CC="emcc.bat" cp $(BASE_DIR)/web/fteshell.html $(RELEASE_DIR)/ftewebgl.html @gzip -f $(RELEASE_DIR)/ftewebgl.html @gzip -f $(RELEASE_DIR)/ftewebgl.js @gzip -f $(RELEASE_DIR)/ftewebgl.js.mem web-dbg: @$(MAKE) gl-dbg FTE_TARGET=web PATH="$(EMSCRIPTENPATH)" CC="emcc.bat" cp $(BASE_DIR)/web/fteshell.html $(RELEASE_DIR)/ftewebgl.html @gzip -f $(DEBUG_DIR)/ftewebgl.html @gzip -f $(DEBUG_DIR)/ftewebgl.js @gzip -f $(DEBUG_DIR)/ftewebgl.js.map ################################################# #android #building for android will require: #download android sdk+ndk #ant installed #droid-dbg will install it on 'the current device', if you've got a device plugged in or an emulator running, it should just work. #makes an ant project for us droid/build.xml: -cd droid && PATH=$$PATH:$(realpath $(ANDROID_HOME)/tools):$(realpath $(ANDROID_NDK_ROOT)) $(ANDROID_SCRIPT) update project -t android-8 -p . -n FTEDroid #build FTE as a library, then build the java+package (release) droid/ftekeystore: ifeq ($(KEYTOOLARGS),) @echo @echo In order to build a usable APK file it must be signed. That requires a private key. @echo Creation of a private key requries various bits of info... @echo You are expected to fill that stuff in now... By the way, don\'t forget the password! @echo Note that every time you use make droid-rel, you will be required to enter a password. @echo You can use \'make droid-opt\' instead if you wish to build an optimised build without signing, @echo but such packages will require a rooted device \(or to be signed later\). @echo Just press control-c if you don\'t want to proceed. @echo Morality warning: never distribute droid/ftekeystore - always do make distclean before distributing. @echo $(JAVATOOL)keytool -genkey -v -keystore $@ -alias autogen -keyalg RSA -keysize 2048 -validity 10000 else @echo Generating keystore @$(JAVATOOL)keytool -genkey -keystore $@ -alias autogen -keyalg RSA -keysize 2048 -validity 10000 -noprompt $(KEYTOOLARGS) endif droid-rel: $(MAKE) FTE_TARGET=droid droid/build.xml droid/ftekeystore $(foreach a, $(DROID_ARCH), $(MAKE) FTE_TARGET=droid gl-rel DROID_ARCH=$a; ) @$(foreach a, $(DROID_ARCH), mkdir -p droid/libs/$a; ) -@$(foreach a, $(DROID_ARCH), cp $(RELEASE_DIR)/gl_droid-$a/libftedroid.so droid/libs/$a/libftedroid.so; ) @cd droid && $(ANT) release ifneq ($(DROID_PACKSU),) @echo @echo Adding custom data files - non-compressed @echo zip droid/bin/FTEDroid-release-unsigned.apk -0 -j $(DROID_PACKSU) endif ifneq ($(DROID_PACKSC),) @echo @echo Adding custom data files - compressed @echo zip droid/bin/FTEDroid-release-unsigned.apk -9 -j $(DROID_PACKSC) endif @echo @echo @echo Signing package... I hope you remember your password. @echo @$(JAVATOOL)jarsigner $(JARSIGNARGS) -digestalg SHA1 -sigalg MD5withRSA -keystore droid/ftekeystore droid/bin/FTEDroid-release-unsigned.apk autogen -rm -f $(RELEASE_DIR)/FTEDroid.apk $(ANDROID_HOME)/tools/zipalign 4 droid/bin/FTEDroid-release-unsigned.apk $(NATIVE_RELEASE_DIR)/FTEDroid.apk droid-opt: $(MAKE) FTE_TARGET=droid droid/build.xml droid/ftekeystore $(MAKE) FTE_TARGET=droid gl-rel mkdir -p droid/libs/armeabi @cp $(RELEASE_DIR)/libftedroid.so droid/libs/armeabi/ @cd droid && $(ANT) release cp droid/bin/FTEDroid-unsigned.apk $(RELEASE_DIR)/FTEDroid.apk #build FTE as a library, then build the java+package (release). also installs it onto the 'current' device. droid-dbg: $(MAKE) FTE_TARGET=droid droid/build.xml $(foreach a, $(DROID_ARCH), $(MAKE) FTE_TARGET=droid gl-dbg DROID_ARCH=$a; ) @$(foreach a, $(DROID_ARCH), mkdir -p droid/libs/$a; ) -@$(foreach a, $(DROID_ARCH), cp $(DEBUG_DIR)/gl_droid-$a/libftedroid.so droid/libs/$a/libftedroid.so; ) @cd droid && $(ANT) debug #&& $(ANT) debug install cp droid/bin/FTEDroid-debug.apk $(DEBUG_DIR)/FTEDroid.apk droid-help: @-echo "make droid-dbg - compiles engine with debug info and signs package with debug key. Attempts to install onto emulator." @-echo "make droid-opt - compiles engine with optimisations, but does not sign package. Not useful." @-echo "make droid-rel - compiles engine with optimisations, adds custom data files, signs with private key, requires password." @-echo @-echo "Android Settings: @-echo "DROID_PACKSC: specifies additional pak or pk3 files to compress into the package, which avoids extra configuration. Only used in release builds. You probably shouldn't use this except for really small packages. Any file seeks will give really poor performance." @-echo "DROID_PACKSU: like DROID_PACKSC, but without compression. Faster loading times, but bigger. Use for anything that is already compressed (especially pk3s)." @-echo "ANDROID_HOME: path to the android sdk install path." @-echo "ANDROID_NDK_ROOT: path to the android ndk install path." @-echo "ANT: path and name of apache ant. Probably doesn't need to be set if you're on linux." @-echo "JAVA_HOME: path of your java install. Commonly already set in environment settings." @-echo "JAVATOOL: path to your java install's bin directory. Doesn't need to be set if its already in your path." @-echo "JARSIGNARGS: Additional optional arguments to java's jarsigner program. You may want to put -storepass FOO in here, but what ever you do - keep it secure. Avoid bash history snooping, etc. If its not present, you will safely be prompted as required." @-echo @-echo "Note that 'make droid-rel' will automatically generate a keystore. If you forget the password, just do a 'make dist-clean'." $(BASE_DIR)/libs/SDL2-2.0.1/i686-w64-mingw32/bin/sdl2-config: wget http://www.libsdl.org/release/SDL2-devel-2.0.1-mingw.tar.gz -O $(BASE_DIR)/sdl2.tar.gz cd $(BASE_DIR)/libs && tar -xvzf $(BASE_DIR)/sdl2.tar.gz rm $(BASE_DIR)/sdl2.tar.gz $(BASE_DIR)/libs/SDL2-2.0.1/x86_64-w64-mingw32/bin/sdl2-config: $(BASE_DIR)/libs/SDL2-2.0.1/i686-w64-mingw32/bin/sdl2-config #update these to download+build a different version. this assumes that the url+subdirs etc contain a consistant version everywhere. JPEGVER=9a ZLIBVER=1.2.8 PNGVER=1.6.14 OGGVER=1.3.2 VORBISVER=1.3.4 #makes sure the configure scripts get the right idea. AR?=$(ARCH)-ar CONFIGARGS+= -host=$(ARCH) --enable-shared=no #--disable-silent-rules makelibs: #lock these down, to avoid expanding them too often #TOOLOVERRIDES:=$(TOOLOVERRIDES) #CONFIGARGS:=$(CONFIGARGS) ifndef ARCH $(MAKE) makelibs ARCH=$(shell $(CC) -dumpmachine) else mkdir -p libs-$(ARCH) test -f jpegsrc.v$(JPEGVER).tar.gz || wget http://www.ijg.org/files/jpegsrc.v$(JPEGVER).tar.gz -test -f libs-$(ARCH)/libjpeg.a || (cd libs-$(ARCH) && tar -xvzf ../jpegsrc.v$(JPEGVER).tar.gz && cd jpeg-$(JPEGVER) && $(TOOLOVERRIDES) ./configure $(CONFIGARGS) && $(TOOLOVERRIDES) $(MAKE) && cp .libs/libjpeg.a ../ && $(TOOLOVERRIDES) $(AR) -s ../libjpeg.a && cp jconfig.h jerror.h jmorecfg.h jpeglib.h jversion.h ../ ) test -f zlib-$(ZLIBVER).tar.gz || wget http://zlib.net/zlib-$(ZLIBVER).tar.gz -test -f libs-$(ARCH)/libz.a || (cd libs-$(ARCH) && tar -xvzf ../zlib-$(ZLIBVER).tar.gz && cd zlib-$(ZLIBVER) && $(TOOLOVERRIDES) ./configure --static && $(TOOLOVERRIDES) $(MAKE) libz.a CC="$(CC) $(W32_CFLAGS)" && cp libz.a ../ && $(TOOLOVERRIDES) $(AR) -s ../libz.a && cp zlib.h zconf.h zutil.h ../ ) test -f libpng-$(PNGVER).tar.gz || wget http://prdownloads.sourceforge.net/libpng/libpng-$(PNGVER).tar.gz?download -O libpng-$(PNGVER).tar.gz -test -f libs-$(ARCH)/libpng.a || (cd libs-$(ARCH) && tar -xvzf ../libpng-$(PNGVER).tar.gz && cd libpng-$(PNGVER) && $(TOOLOVERRIDES) ./configure $(CONFIGARGS) --with-zlib-prefix=$(NATIVE_ABSBASE_DIR)/libs-$(ARCH)/zlib-$(ZLIBVER)/ && $(TOOLOVERRIDES) $(MAKE) && cp .libs/libpng16.a ../libpng.a && cp png*.h ../ ) test -f libogg-$(OGGVER).tar.gz || wget http://downloads.xiph.org/releases/ogg/libogg-$(OGGVER).tar.gz -test -f libs-$(ARCH)/libogg.a || (cd libs-$(ARCH) && tar -xvzf ../libogg-$(OGGVER).tar.gz && cd libogg-$(OGGVER) && $(TOOLOVERRIDES) ./configure $(CONFIGARGS) && $(TOOLOVERRIDES) $(MAKE) && cp src/.libs/libogg.a ../ && $(TOOLOVERRIDES) $(AR) -s ../libogg.a) test -f libvorbis-$(VORBISVER).tar.gz || wget http://downloads.xiph.org/releases/vorbis/libvorbis-$(VORBISVER).tar.gz -test -f libs-$(ARCH)/libvorbisfile.a || (cd libs-$(ARCH) && tar -xvzf ../libvorbis-$(VORBISVER).tar.gz && cd libvorbis-$(VORBISVER) && $(TOOLOVERRIDES) ./configure PKG_CONFIG= $(CONFIGARGS) --disable-oggtest --with-ogg-libraries=.. --with-ogg-includes=$(NATIVE_ABSBASE_DIR)/libs-$(ARCH)/libogg-$(OGGVER)/include && $(TOOLOVERRIDES) $(MAKE) && cp lib/.libs/libvorbis.a ../ && cp lib/.libs/libvorbisfile.a ../ ) endif prefix ?= /usr/local exec_prefix ?= $(prefix) bindir ?= $(exec_prefix)/bin sbindir ?= $(exec_prefix)/sbin INSTALL ?= install INSTALL_PROGRAM ?= $(INSTALL) INSTALL_DATA ?= ${INSTALL} -m 644 install: sv-rel gl-rel mingl-rel qcc-rel $(INSTALL_PROGRAM) $(RELEASE_DIR)fteqw $(DESTDIR)$(bindir)/fteqw $(INSTALL_PROGRAM) $(RELEASE_DIR)fteqwsv $(DESTDIR)$(bindir)/fteqwsv $(INSTALL_PROGRAM) $(RELEASE_DIR)fteqcc $(DESTDIR)$(bindir)/fteqcc