fteqw/engine/common/net_chan.c

663 lines
16 KiB
C
Raw Normal View History

/*
Copyright (C) 1996-1997 Id Software, Inc.
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
as published by the Free Software Foundation; either version 2
of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include "quakedef.h"
#ifdef _WIN32
#include "winquake.h"
#else
#include "unistd.h"
#endif
#define PACKET_HEADER 8
/*
packet header
-------------
31 sequence
1 does this message contain a reliable payload
31 acknowledge sequence
1 acknowledge receipt of even/odd message
16 qport
The remote connection never knows if it missed a reliable message, the
local side detects that it has been dropped by seeing a sequence acknowledge
higher thatn the last reliable sequence, but without the correct evon/odd
bit for the reliable set.
If the sender notices that a reliable message has been dropped, it will be
retransmitted. It will not be retransmitted again until a message after
the retransmit has been acknowledged and the reliable still failed to get there.
if the sequence number is -1, the packet should be handled without a netcon
The reliable message can be added to at any time by doing
MSG_Write* (&netchan->message, <data>).
If the message buffer is overflowed, either by a single message, or by
multiple frames worth piling up while the last reliable transmit goes
unacknowledged, the netchan signals a fatal error.
Reliable messages are always placed first in a packet, then the unreliable
message is included if there is sufficient room.
To the receiver, there is no distinction between the reliable and unreliable
parts of the message, they are just processed out as a single larger message.
Illogical packet sequence numbers cause the packet to be dropped, but do
not kill the connection. This, combined with the tight window of valid
reliable acknowledgement numbers provides protection against malicious
address spoofing.
The qport field is a workaround for bad address translating routers that
sometimes remap the client's source port on a packet during gameplay.
If the base part of the net address matches and the qport matches, then the
channel matches even if the IP port differs. The IP port should be updated
to the new value before sending out any replies.
*/
int net_drop;
cvar_t showpackets = SCVAR("showpackets", "0");
cvar_t showdrop = SCVAR("showdrop", "0");
cvar_t qport = SCVAR("qport", "0");
/*
===============
Netchan_Init
===============
*/
void Netchan_Init (void)
{
int port;
// pick a port value that should be nice and random
#ifdef _WIN32
port = (time(NULL)) & 0xffff;
#else
port = ((int)(getpid()+getuid()*1000) * time(NULL)) & 0xffff;
#endif
Cvar_Register (&showpackets, "Networking");
Cvar_Register (&showdrop, "Networking");
Cvar_Register (&qport, "Networking");
Cvar_SetValue(&qport, port);
}
/*
===============
Netchan_OutOfBand
Sends an out-of-band datagram
================
*/
void Netchan_OutOfBand (netsrc_t sock, netadr_t adr, int length, qbyte *data)
{
sizebuf_t send;
qbyte send_buf[MAX_QWMSGLEN + PACKET_HEADER];
// write the packet header
send.data = send_buf;
send.maxsize = sizeof(send_buf);
send.cursize = 0;
MSG_WriteLong (&send, -1); // -1 sequence means out of band
SZ_Write (&send, data, length);
// send the datagram
//zoid, no input in demo playback mode
#ifndef SERVERONLY
if (!cls.demoplayback)
#endif
NET_SendPacket (sock, send.cursize, send.data, adr);
}
/*
===============
Netchan_OutOfBandPrint
Sends a text message in an out-of-band datagram
================
*/
void VARGS Netchan_OutOfBandPrint (netsrc_t sock, netadr_t adr, char *format, ...)
{
va_list argptr;
static char string[8192]; // ??? why static?
va_start (argptr, format);
vsnprintf (string,sizeof(string)-1, format,argptr);
va_end (argptr);
Netchan_OutOfBand (sock, adr, strlen(string), (qbyte *)string);
}
#ifndef CLIENTONLY
void VARGS Netchan_OutOfBandTPrintf (netsrc_t sock, netadr_t adr, int language, translation_t text, ...)
{
va_list argptr;
static char string[8192]; // ??? why static?
char *format = langtext(text, language);
string[0] = A2C_PRINT;
va_start (argptr, text);
vsnprintf (string+1,sizeof(string)-1, format,argptr);
va_end (argptr);
Netchan_OutOfBand (sock, adr, strlen(string), (qbyte *)string);
}
#endif
/*
==============
Netchan_Setup
called to open a channel to a remote system
==============
*/
void Netchan_Setup (netsrc_t sock, netchan_t *chan, netadr_t adr, int qport)
{
memset (chan, 0, sizeof(*chan));
chan->sock = sock;
chan->remote_address = adr;
chan->last_received = realtime;
chan->message.data = chan->message_buf;
chan->message.allowoverflow = true;
chan->message.maxsize = MAX_QWMSGLEN;//sizeof(chan->message_buf);
chan->qport = qport;
}
/*
===============
Netchan_CanPacket
Returns true if the bandwidth choke isn't active
================
*/
#define MAX_BACKUP 200
qboolean Netchan_CanPacket (netchan_t *chan, int rate)
{
if (chan->remote_address.type == NA_LOOPBACK)
return true; //don't ever drop packets due to possible routing problems when there is no routing.
if (chan->cleartime < realtime + MAX_BACKUP/(float)rate)
return true;
return false;
}
/*
===============
Netchan_CanReliable
Returns true if the bandwidth choke isn't
================
*/
qboolean Netchan_CanReliable (netchan_t *chan, int rate)
{
if (chan->reliable_length)
return false; // waiting for ack
return Netchan_CanPacket (chan, rate);
}
#ifdef SERVERONLY
qboolean ServerPaused(void);
#endif
#ifdef NQPROT
nqprot_t NQNetChan_Process(netchan_t *chan)
{
int header;
int sequence;
int drop;
MSG_BeginReading ();
header = LongSwap(MSG_ReadLong());
if (net_message.cursize != (header & NETFLAG_LENGTH_MASK))
return NQP_ERROR; //size was wrong, couldn't have been ours.
if (header & NETFLAG_CTL)
return NQP_ERROR; //huh?
sequence = LongSwap(MSG_ReadLong());
if (header & NETFLAG_ACK)
{
if (sequence == chan->reliable_sequence)
{
chan->reliable_start += MAX_NQDATAGRAM;
if (chan->reliable_start >= chan->reliable_length)
{
chan->reliable_length = 0; //they got the entire message
chan->reliable_start = 0;
}
chan->incoming_reliable_acknowledged = chan->reliable_sequence;
chan->reliable_sequence++;
chan->last_received = realtime;
}
else if (sequence < chan->reliable_sequence)
Con_DPrintf("Stale ack recieved\n");
else if (sequence > chan->reliable_sequence)
Con_Printf("Future ack recieved\n");
return NQP_ERROR; //don't try execing the 'payload'. I hate ack packets.
}
if (header & NETFLAG_UNRELIABLE)
{
if (sequence < chan->incoming_unreliable)
{
Con_DPrintf("Stale datagram recieved\n");
return NQP_ERROR;
}
drop = sequence - chan->incoming_unreliable - 1;
if (drop > 0)
{
Con_DPrintf("Dropped %i datagrams\n", drop);
chan->drop_count += drop;
}
chan->incoming_unreliable = sequence;
chan->last_received = realtime;
chan->incoming_acknowledged++;
chan->good_count++;
return NQP_DATAGRAM;
}
if (header & NETFLAG_DATA)
{
int runt[2];
//always reply. a stale sequence probably means our ack got lost.
runt[0] = BigLong(NETFLAG_ACK | 8);
runt[1] = BigLong(sequence);
NET_SendPacket (chan->sock, 8, runt, net_from);
chan->last_received = realtime;
if (sequence == chan->incoming_reliable_sequence)
{
chan->incoming_reliable_sequence++;
if (chan->in_fragment_length + net_message.cursize-8 >= sizeof(chan->in_fragment_buf))
{
chan->fatal_error = true;
return NQP_ERROR;
}
memcpy(chan->in_fragment_buf + chan->in_fragment_length, net_message.data+8, net_message.cursize-8);
chan->in_fragment_length += net_message.cursize-8;
if (header & NETFLAG_EOM)
{
SZ_Clear(&net_message);
SZ_Write(&net_message, chan->in_fragment_buf, chan->in_fragment_length);
chan->in_fragment_length = 0;
MSG_BeginReading();
return NQP_RELIABLE; //we can read it now
}
}
else
Con_DPrintf("Stale reliable (%i)\n", sequence);
return NQP_ERROR;
}
return NQP_ERROR; //not supported.
}
#endif
/*
===============
Netchan_Transmit
tries to send an unreliable message to a connection, and handles the
transmition / retransmition of the reliable messages.
A 0 length will still generate a packet and deal with the reliable messages.
================
*/
void Netchan_Transmit (netchan_t *chan, int length, qbyte *data, int rate)
{
sizebuf_t send;
qbyte send_buf[MAX_OVERALLMSGLEN + PACKET_HEADER];
qboolean send_reliable;
unsigned w1, w2;
int i;
#ifdef NQPROT
if (chan->isnqprotocol)
{
send.data = send_buf;
send.maxsize = MAX_NQMSGLEN + PACKET_HEADER;
send.cursize = 0;
if (!chan->reliable_length && chan->message.cursize)
{
memcpy (chan->reliable_buf, chan->message_buf, chan->message.cursize);
chan->reliable_length = chan->message.cursize;
chan->reliable_start = 0;
chan->message.cursize = 0;
}
i = chan->reliable_length - chan->reliable_start;
if (i>0)
{
MSG_WriteLong(&send, 0);
MSG_WriteLong(&send, LongSwap(chan->reliable_sequence));
if (i > MAX_NQDATAGRAM)
i = MAX_NQDATAGRAM;
SZ_Write (&send, chan->reliable_buf+chan->reliable_start, i);
if (chan->reliable_start+i == chan->reliable_length)
{
if (send.cursize + length < send.maxsize)
{ //throw the unreliable packet into the same one as the reliable (but not sent reliably)
SZ_Write (&send, data, length);
length = 0;
}
*(int*)send_buf = BigLong(NETFLAG_DATA | NETFLAG_EOM | send.cursize);
}
else
*(int*)send_buf = BigLong(NETFLAG_DATA | send.cursize);
NET_SendPacket (chan->sock, send.cursize, send.data, chan->remote_address);
if (chan->cleartime < realtime)
chan->cleartime = realtime + send.cursize/(float)rate;
else
chan->cleartime += send.cursize/(float)rate;
}
//send out the unreliable (if still unsent)
if (length)
{
MSG_WriteLong(&send, 0);
MSG_WriteLong(&send, LongSwap(chan->outgoing_unreliable));
chan->outgoing_unreliable++;
SZ_Write (&send, data, length);
*(int*)send_buf = BigLong(NETFLAG_UNRELIABLE | send.cursize);
NET_SendPacket (chan->sock, send.cursize, send.data, chan->remote_address);
if (chan->cleartime < realtime)
chan->cleartime = realtime + send.cursize/(float)rate;
else
chan->cleartime += send.cursize/(float)rate;
send.cursize = 0;
}
return;
}
#endif
// check for message overflow
if (chan->message.overflowed)
{
chan->fatal_error = true;
Con_TPrintf (TL_OUTMESSAGEOVERFLOW
, NET_AdrToString (chan->remote_address));
return;
}
// if the remote side dropped the last reliable message, resend it
send_reliable = false;
if (chan->incoming_acknowledged > chan->last_reliable_sequence
&& chan->incoming_reliable_acknowledged != chan->reliable_sequence)
send_reliable = true;
// if the reliable transmit buffer is empty, copy the current message out
if (!chan->reliable_length && chan->message.cursize)
{
memcpy (chan->reliable_buf, chan->message_buf, chan->message.cursize);
chan->reliable_length = chan->message.cursize;
chan->message.cursize = 0;
chan->reliable_sequence ^= 1;
send_reliable = true;
}
// write the packet header
send.data = send_buf;
send.maxsize = MAX_QWMSGLEN + PACKET_HEADER; //dmw: wasn't quite true.
send.cursize = 0;
w1 = chan->outgoing_sequence | (send_reliable<<31);
w2 = chan->incoming_sequence | (chan->incoming_reliable_sequence<<31);
chan->outgoing_sequence++;
MSG_WriteLong (&send, w1);
MSG_WriteLong (&send, w2);
// send the qport if we are a client
#ifndef SERVERONLY
if (chan->sock == NS_CLIENT)
MSG_WriteShort (&send, cls.qport);
#endif
// copy the reliable message to the packet first
if (send_reliable)
{
SZ_Write (&send, chan->reliable_buf, chan->reliable_length);
chan->last_reliable_sequence = chan->outgoing_sequence;
}
// add the unreliable part if space is available
if (send.maxsize - send.cursize >= length)
SZ_Write (&send, data, length);
// send the datagram
i = chan->outgoing_sequence & (MAX_LATENT-1);
chan->outgoing_size[i] = send.cursize;
chan->outgoing_time[i] = realtime;
#ifdef HUFFNETWORK
if (chan->compress)
{
//int oldsize = send.cursize;
Huff_CompressPacket(&send, (chan->sock == NS_CLIENT)?10:8);
// Con_Printf("%i becomes %i\n", oldsize, send.cursize);
// Huff_DecompressPacket(&send, (chan->sock == NS_CLIENT)?10:8);
}
#endif
//zoid, no input in demo playback mode
#ifndef SERVERONLY
if (!cls.demoplayback)
#endif
{
NET_SendPacket (chan->sock, send.cursize, send.data, chan->remote_address);
}
if (chan->cleartime < realtime)
chan->cleartime = realtime + send.cursize/(float)rate;
else
chan->cleartime += send.cursize/(float)rate;
#ifdef SERVERONLY
if (ServerPaused())
chan->cleartime = realtime;
#endif
if (showpackets.value)
Con_Printf ("--> s=%i(%i) a=%i(%i) %i\n"
, chan->outgoing_sequence
, send_reliable
, chan->incoming_sequence
, chan->incoming_reliable_sequence
, send.cursize);
}
/*
=================
Netchan_Process
called when the current net_message is from remote_address
modifies net_message so that it points to the packet payload
=================
*/
qboolean Netchan_Process (netchan_t *chan)
{
unsigned sequence, sequence_ack;
unsigned reliable_ack, reliable_message;
#ifndef CLIENTONLY
int qport;
#endif
if (
#ifndef SERVERONLY
!cls.demoplayback &&
#endif
!NET_CompareAdr (net_from, chan->remote_address))
return false;
// get sequence numbers
MSG_BeginReading ();
sequence = MSG_ReadLong ();
sequence_ack = MSG_ReadLong ();
// read the qport if we are a server
#ifndef CLIENTONLY
if (chan->sock == NS_SERVER)
qport = MSG_ReadShort ();
#endif
reliable_message = sequence >> 31;
reliable_ack = sequence_ack >> 31;
sequence &= ~(1<<31);
sequence_ack &= ~(1<<31);
if (showpackets.value)
Con_Printf ("<-- s=%i(%i) a=%i(%i) %i\n"
, sequence
, reliable_message
, sequence_ack
, reliable_ack
, net_message.cursize);
// get a rate estimation
#if 0
if (chan->outgoing_sequence - sequence_ack < MAX_LATENT)
{
int i;
double time, rate;
i = sequence_ack & (MAX_LATENT - 1);
time = realtime - chan->outgoing_time[i];
time -= 0.1; // subtract 100 ms
if (time <= 0)
{ // gotta be a digital link for <100 ms ping
if (chan->rate > 1.0/5000)
chan->rate = 1.0/5000;
}
else
{
if (chan->outgoing_size[i] < 512)
{ // only deal with small messages
rate = chan->outgoing_size[i]/time;
if (rate > 5000)
rate = 5000;
rate = 1.0/rate;
if (chan->rate > rate)
chan->rate = rate;
}
}
}
#endif
//
// discard stale or duplicated packets
//
if (sequence <= (unsigned)chan->incoming_sequence)
{
if (showdrop.value)
Con_TPrintf (TL_OUTOFORDERPACKET
, NET_AdrToString (chan->remote_address)
, sequence
, chan->incoming_sequence);
return false;
}
//
// dropped packets don't keep the message from being used
//
net_drop = sequence - (chan->incoming_sequence+1);
if (net_drop > 0)
{
chan->drop_count += 1;
if (showdrop.value)
Con_TPrintf (TL_DROPPEDPACKETCOUNT
, NET_AdrToString (chan->remote_address)
, sequence-(chan->incoming_sequence+1)
, sequence);
}
//
// if the current outgoing reliable message has been acknowledged
// clear the buffer to make way for the next
//
if (reliable_ack == (unsigned)chan->reliable_sequence)
chan->reliable_length = 0; // it has been received
//
// if this message contains a reliable message, bump incoming_reliable_sequence
//
chan->incoming_sequence = sequence;
chan->incoming_acknowledged = sequence_ack;
chan->incoming_reliable_acknowledged = reliable_ack;
if (reliable_message)
chan->incoming_reliable_sequence ^= 1;
//
// the message can now be read from the current message pointer
// update statistics counters
//
chan->frame_latency = chan->frame_latency*OLD_AVG
+ (chan->outgoing_sequence-sequence_ack)*(1.0-OLD_AVG);
chan->frame_rate = chan->frame_rate*OLD_AVG
+ (realtime-chan->last_received)*(1.0-OLD_AVG);
chan->good_count += 1;
chan->last_received = realtime;
#ifdef HUFFNETWORK
if (chan->compress)
{
// Huff_CompressPacket(&net_message, (chan->sock == NS_SERVER)?10:8);
Huff_DecompressPacket(&net_message, (chan->sock == NS_SERVER)?10:8);
}
#endif
return true;
}