#ifndef __QFILES_H__
#define __QFILES_H__

//
// qfiles.h: quake file formats
// This file must be identical in the quake and utils directories
//

// surface geometry should not exceed these limits
#define	SHADER_MAX_VERTEXES	1000
#define	SHADER_MAX_INDEXES	(6*SHADER_MAX_VERTEXES)


// the maximum size of game reletive pathnames
#define	MAX_QPATH		64

/*
========================================================================

QVM files

========================================================================
*/

#define	VM_MAGIC	0x12721444
typedef struct {
	int		vmMagic;

	int		instructionCount;

	int		codeOffset;
	int		codeLength;

	int		dataOffset;
	int		dataLength;
	int		litLength;			// ( dataLength - litLength ) should be byteswapped on load
	int		bssLength;			// zero filled memory appended to datalength
} vmHeader_t;

/*
========================================================================

PCX files are used for 8 bit images

========================================================================
*/

typedef struct {
    char	manufacturer;
    char	version;
    char	encoding;
    char	bits_per_pixel;
    unsigned short	xmin,ymin,xmax,ymax;
    unsigned short	hres,vres;
    unsigned char	palette[48];
    char	reserved;
    char	color_planes;
    unsigned short	bytes_per_line;
    unsigned short	palette_type;
    char	filler[58];
    unsigned char	data;			// unbounded
} pcx_t;


/*
========================================================================

TGA files are used for 24/32 bit images

========================================================================
*/

typedef struct _TargaHeader {
	unsigned char 	id_length, colormap_type, image_type;
	unsigned short	colormap_index, colormap_length;
	unsigned char	colormap_size;
	unsigned short	x_origin, y_origin, width, height;
	unsigned char	pixel_size, attributes;
} TargaHeader;



/*
========================================================================

.MD3 triangle model file format

========================================================================
*/

#define MD3_IDENT			(('3'<<24)+('P'<<16)+('D'<<8)+'I')
#define MD3_VERSION			15

// limits
#define MD3_MAX_LODS		3
#define	MD3_MAX_TRIANGLES	8192	// per surface
#define MD3_MAX_VERTS		4096	// per surface
#define MD3_MAX_SHADERS		256		// per surface
#define MD3_MAX_FRAMES		1024	// per model
#define	MD3_MAX_SURFACES	32 + 32	// per model
#define MD3_MAX_TAGS		16		// per frame

// vertex scales
#define	MD3_XYZ_SCALE		(1.0/64)

typedef struct md3Frame_s {
	vec3_t		bounds[2];
	vec3_t		localOrigin;
	float		radius;
	char		name[16];
} md3Frame_t;

typedef struct md3Tag_s {
	char		name[MAX_QPATH];	// tag name
	vec3_t		origin;
	vec3_t		axis[3];
} md3Tag_t;

/*
** md3Surface_t
**
** CHUNK			SIZE
** header			sizeof( md3Surface_t )
** shaders			sizeof( md3Shader_t ) * numShaders
** triangles[0]		sizeof( md3Triangle_t ) * numTriangles
** st				sizeof( md3St_t ) * numVerts
** XyzNormals		sizeof( md3XyzNormal_t ) * numVerts * numFrames
*/
typedef struct {
	int		ident;				// 

	char	name[MAX_QPATH];	// polyset name

	int		flags;
	int		numFrames;			// all surfaces in a model should have the same

	int		numShaders;			// all surfaces in a model should have the same
	int		numVerts;

	int		numTriangles;
	int		ofsTriangles;

	int		ofsShaders;			// offset from start of md3Surface_t
	int		ofsSt;				// texture coords are common for all frames
	int		ofsXyzNormals;		// numVerts * numFrames

	int		ofsEnd;				// next surface follows
} md3Surface_t;

typedef struct {
	char			name[MAX_QPATH];
	int				shaderIndex;	// for in-game use
} md3Shader_t;

typedef struct {
	int			indexes[3];
} md3Triangle_t;

typedef struct {
	float		st[2];
} md3St_t;

typedef struct {
	short		xyz[3];
	short		normal;
} md3XyzNormal_t;

typedef struct {
	int			ident;
	int			version;

	char		name[MAX_QPATH];	// model name

	int			flags;

	int			numFrames;
	int			numTags;			
	int			numSurfaces;

	int			numSkins;

	int			ofsFrames;			// offset for first frame
	int			ofsTags;			// numFrames * numTags
	int			ofsSurfaces;		// first surface, others follow

	int			ofsEnd;				// end of file
} md3Header_t;


/*
==============================================================================

  .BSP file format

==============================================================================
*/


#define BSP_IDENT	(('P'<<24)+('S'<<16)+('B'<<8)+'R')
		// little-endian "IBSP"

#define BSP_VERSION			1


// there shouldn't be any problem with increasing these values at the
// expense of more memory allocation in the utilities
#define	MAX_MAP_MODELS		0x400
#define	MAX_MAP_BRUSHES		0x8000
#define	MAX_MAP_ENTITIES	0x800
#define	MAX_MAP_ENTSTRING	0x40000
#define	MAX_MAP_SHADERS		0x400

#define	MAX_MAP_AREAS		0x100	// MAX_MAP_AREA_BYTES in q_shared must match!
#define	MAX_MAP_FOGS		0x100
#define	MAX_MAP_PLANES		0x20000
#define	MAX_MAP_NODES		0x20000
#define	MAX_MAP_BRUSHSIDES	0x20000
#define	MAX_MAP_LEAFS		0x20000
#define	MAX_MAP_LEAFFACES	0x20000
#define	MAX_MAP_LEAFBRUSHES 0x40000
#define	MAX_MAP_PORTALS		0x20000
#define	MAX_MAP_LIGHTING	0x800000
#define	MAX_MAP_LIGHTGRID	65535
#define	MAX_MAP_LIGHTGRID_ARRAY	0x100000

#define	MAX_MAP_VISIBILITY	0x400000

#define	MAX_MAP_DRAW_SURFS	0x20000
#define	MAX_MAP_DRAW_VERTS	0x80000
#define	MAX_MAP_DRAW_INDEXES	0x80000


// key / value pair sizes in the entities lump
#define	MAX_KEY				32
#define	MAX_VALUE			1024

// the editor uses these predefined yaw angles to orient entities up or down
#define	ANGLE_UP			-1
#define	ANGLE_DOWN			-2

#define	LIGHTMAP_WIDTH		128
#define	LIGHTMAP_HEIGHT		128

//=============================================================================

#ifdef _XBOX

#pragma pack(push, 1)

typedef struct {
	float			mins[3], maxs[3];
	int				firstSurface;
	unsigned short	numSurfaces;
	int				firstBrush;
	unsigned short	numBrushes;
} dmodel_t;

typedef struct {
	char		shader[MAX_QPATH];
	int			surfaceFlags;
	int			contentFlags;
} dshader_t;

// planes x^1 is allways the opposite of plane x

typedef struct {
	float		normal[3];
	float		dist;
} dplane_t;

typedef struct {
	int				planeNum;
	short			children[2];	// negative numbers are -(leafs+1), not nodes
	short			mins[3];		// for frustom culling
	short			maxs[3];
} dnode_t;

typedef struct {
	short			cluster;			// -1 = opaque cluster (do I still store these?)
	signed char		area;

	short			mins[3];			// for frustum culling
	short			maxs[3];

	unsigned short	firstLeafSurface;
	unsigned short	numLeafSurfaces;

	unsigned short	firstLeafBrush;
	unsigned short	numLeafBrushes;
} dleaf_t;

typedef struct {
	int				planeNum;		// positive plane side faces out of the leaf
	byte			shaderNum;
} dbrushside_t;

typedef struct {
	int				firstSide;
	byte			numSides;
	unsigned short	shaderNum;		// the shader that determines the contents flags
} dbrush_t;

typedef struct {
	char		shader[MAX_QPATH];
	int			brushNum;
	int			visibleSide;	// the brush side that ray tests need to clip against (-1 == none)
} dfog_t;

// Light Style Constants
#define	MAXLIGHTMAPS	4
#define LS_NORMAL		0x00
#define LS_UNUSED		0xfe
#define	LS_NONE			0xff
#define MAX_LIGHT_STYLES		64

typedef struct {
	float			lightmap[MAXLIGHTMAPS][2];
	float			st[2];
	short			xyz[3];
	short			normal[3];
	byte			color[MAXLIGHTMAPS][4];
} mapVert_t;

#define DRAWVERT_LIGHTMAP_SCALE 32768.0f
// Change texture coordinates for TriSurfs to be even more fine grain.
// See below for note about keeping MIN_ST and MAX_ST up to date with
// ST_SCALE. These are in 4.12. Okay, how about 5.11?
//#define DRAWVERT_ST_SCALE 4096.0f
#define DRAWVERT_ST_SCALE 2048.0f

// We use a slightly different format for the fixed point texture
// coords in Grid/Mesh drawverts: 10.6 rather than 12.4
// To be sure that this is ok, keep the max and min values equal to
// the largest and smallest whole numbers that can be stored using the
// format. (ie: Don't change GRID_DRAWVERT_ST_SCALE without changing
// the other two!) (And don't forget that we're using a bit for sign.)
#define GRID_DRAWVERT_ST_SCALE 64.0f

// This master switch controls whether we use compressed (4-bit per channel)
// vertex colors in draw and surface verts. It saves memory, but I'm switching
// it off, because we end up with that nasty green/purple streaking effect.
// If we ever figure out how to do it better... (1555? 565?)
//#define COMPRESS_VERTEX_COLORS

typedef struct {
	short		xyz[3];
	short		dvst[2];
	short		dvlightmap[MAXLIGHTMAPS][2];
	short		normal[3];
#ifdef _XBOX
	vec3_t		tangent;
#endif
#ifdef COMPRESS_VERTEX_COLORS
	byte		dvcolor[MAXLIGHTMAPS][1];
#else
	byte		dvcolor[MAXLIGHTMAPS][4];
#endif
} drawVert_t;

typedef struct {
	byte	flags;
	byte	latLong[2];
} dgrid_t;

typedef struct {
	int			code;
	byte		shaderNum;
	signed char	fogNum;

	unsigned int	verts;				// high 20 bits are first vert, low 12 are num verts
	unsigned int	indexes;			// high 20 bits are first index, low 12 are num indices

	byte		lightmapStyles[MAXLIGHTMAPS];
	byte		lightmapNum[MAXLIGHTMAPS];

	short		lightmapVecs[3];
} dface_t;

typedef struct {
	int			code;
	byte		shaderNum;
	signed char	fogNum;

	unsigned int	verts;				// high 20 bits are first vert, low 12 are num verts

	byte		lightmapStyles[MAXLIGHTMAPS];
	byte		lightmapNum[MAXLIGHTMAPS];

	short		lightmapVecs[2][3];		// for patches, [0] and [1] are lodbounds

	byte		patchWidth;
	byte		patchHeight;
} dpatch_t;

typedef struct {
	int			code;
	byte		shaderNum;
	signed char	fogNum;

	unsigned int	verts;				// high 20 bits are first vert, low 12 are num verts
	unsigned int	indexes;			// high 20 bits are first index, low 12 are num indices

	byte		lightmapStyles[MAXLIGHTMAPS];
} dtrisurf_t;

typedef struct {
	int				code;
	byte			shaderNum;
	signed char     fogNum;

	short			origin[3];
	short			normal[3];
	byte			color[3];
} dflare_t;

#pragma pack(pop)

#else // _XBOX

typedef struct {
	int		fileofs, filelen;
} lump_t;

#define	LUMP_ENTITIES		0
#define	LUMP_SHADERS		1
#define	LUMP_PLANES			2
#define	LUMP_NODES			3
#define	LUMP_LEAFS			4
#define	LUMP_LEAFSURFACES	5
#define	LUMP_LEAFBRUSHES	6
#define	LUMP_MODELS			7
#define	LUMP_BRUSHES		8
#define	LUMP_BRUSHSIDES		9
#define	LUMP_DRAWVERTS		10
#define	LUMP_DRAWINDEXES	11
#define	LUMP_FOGS			12
#define	LUMP_SURFACES		13
#define	LUMP_LIGHTMAPS		14
#define	LUMP_LIGHTGRID		15
#define	LUMP_VISIBILITY		16
#define LUMP_LIGHTARRAY		17
#define	HEADER_LUMPS		18

typedef struct {
	int			ident;
	int			version;

	lump_t		lumps[HEADER_LUMPS];
} dheader_t;

typedef struct {
	float		mins[3], maxs[3];
	int			firstSurface, numSurfaces;
	int			firstBrush, numBrushes;
} dmodel_t;

typedef struct dshader_s {
	char		shader[MAX_QPATH];
	int			surfaceFlags;
	int			contentFlags;
} dshader_t;

// planes x^1 is allways the opposite of plane x

typedef struct {
	float		normal[3];
	float		dist;
} dplane_t;

typedef struct {
	int			planeNum;
	int			children[2];	// negative numbers are -(leafs+1), not nodes
	int			mins[3];		// for frustom culling
	int			maxs[3];
} dnode_t;

typedef struct {
	int			cluster;			// -1 = opaque cluster (do I still store these?)
	int			area;

	int			mins[3];			// for frustum culling
	int			maxs[3];

	int			firstLeafSurface;
	int			numLeafSurfaces;

	int			firstLeafBrush;
	int			numLeafBrushes;
} dleaf_t;

typedef struct {
	int			planeNum;			// positive plane side faces out of the leaf
	int			shaderNum;
	int			drawSurfNum;
} dbrushside_t;

typedef struct {
	int			firstSide;
	int			numSides;
	int			shaderNum;		// the shader that determines the contents flags
} dbrush_t;

typedef struct {
	char		shader[MAX_QPATH];
	int			brushNum;
	int			visibleSide;	// the brush side that ray tests need to clip against (-1 == none)
} dfog_t;

// Light Style Constants
#define	MAXLIGHTMAPS	4
#define LS_NORMAL		0x00
#define LS_UNUSED		0xfe
#define	LS_NONE			0xff
#define MAX_LIGHT_STYLES		64

typedef struct {
	vec3_t		xyz;
	float		st[2];
	float		lightmap[MAXLIGHTMAPS][2];
	vec3_t		normal;
	byte		color[MAXLIGHTMAPS][4];
} mapVert_t;

typedef struct {
	vec3_t		xyz;
	float		st[2];
	float		lightmap[MAXLIGHTMAPS][2];
	vec3_t		normal;
	byte		color[MAXLIGHTMAPS][4];
} drawVert_t;

typedef struct
{
	byte		ambientLight[MAXLIGHTMAPS][3];
	byte		directLight[MAXLIGHTMAPS][3];
	byte		styles[MAXLIGHTMAPS];
	byte		latLong[2];
}  dgrid_t;

typedef enum {
	MST_BAD,
	MST_PLANAR,
	MST_PATCH,
	MST_TRIANGLE_SOUP,
	MST_FLARE
} mapSurfaceType_t;

typedef struct {
	int			shaderNum;
	int			fogNum;
	int			surfaceType;

	int			firstVert;
	int			numVerts;

	int			firstIndex;
	int			numIndexes;

	byte		lightmapStyles[MAXLIGHTMAPS], vertexStyles[MAXLIGHTMAPS];
	int			lightmapNum[MAXLIGHTMAPS];
	int			lightmapX[MAXLIGHTMAPS], lightmapY[MAXLIGHTMAPS];
	int			lightmapWidth, lightmapHeight;

	vec3_t		lightmapOrigin;
	vec3_t		lightmapVecs[3];	// for patches, [0] and [1] are lodbounds

	int			patchWidth;
	int			patchHeight;
} dsurface_t;

#endif // _XBOX

typedef enum //# hunkAllocType_e
{
	HA_MISC,	
	HA_MAP,
	HA_SHADERS,
	HA_LIGHTING,
	HA_FOG,
	HA_PATCHES,
	HA_VIS,
	HA_SUBMODELS,
	HA_MODELS,
	MAX_HA_TYPES
} hunkAllocType_t;



/////////////////////////////////////////////////////////////
//
// Defines and structures required for fonts

#define GLYPH_COUNT			256

// Must match define in stmparse.h
#define STYLE_DROPSHADOW	0x80000000
#define STYLE_BLINK			0x40000000
#define	SET_MASK			0x00ffffff

typedef struct 
{
	short		width;					// number of pixels wide
	short		height;					// number of scan lines
	short		horizAdvance;			// number of pixels to advance to the next char
	short		horizOffset;			// x offset into space to render glyph
	int			baseline;				// y offset 
	float		s;						// x start tex coord
	float		t;						// y start tex coord
	float		s2;						// x end tex coord
	float		t2;						// y end tex coord
} glyphInfo_t;


// this file corresponds 1:1 with the "*.fontdat" files, so don't change it unless you're going to
//	recompile the fontgen util and regenerate all the fonts!
//
typedef struct dfontdat_s
{
	glyphInfo_t		mGlyphs[GLYPH_COUNT];

	short			mPointSize;
	short			mHeight;				// max height of font
	short			mAscender;
	short			mDescender;

	short			mKoreanHack;			// unused field, written out by John's fontgen program but we have to leave it there for disk structs <sigh>
} dfontdat_t;

/////////////////// fonts end ////////////////////////////////////



#endif