id/doom3-bfg
0
0
Fork 0
mirror of https://github.com/id-Software/DOOM-3-BFG.git synced 2024-12-11 21:21:27 +00:00
Code Issues Projects Releases Packages Wiki Activity
doom3-bfg/neo/libs/jpeg-6/jdcolor.cpp
Robert Beckebans c2f45c550c Moved third-party libs to libs/
2012-11-27 21:26:06 +01:00

371 lines
14 KiB
C++
Raw Blame History

/*
* jdcolor.c
*
* Copyright (C) 1991-1995, Thomas G. Lane.
* This file is part of the Independent JPEG Group's software.
* For conditions of distribution and use, see the accompanying README file.
*
* This file contains output colorspace conversion routines.
*/
#define JPEG_INTERNALS
#include "jinclude.h"
#include "jpeglib.h"
/* Private subobject */
typedef struct {
struct jpeg_color_deconverter pub;/* public fields */
/* Private state for YCC->RGB conversion */
int * Cr_r_tab; /* => table for Cr to R conversion */
int * Cb_b_tab; /* => table for Cb to B conversion */
INT32 * Cr_g_tab; /* => table for Cr to G conversion */
INT32 * Cb_g_tab; /* => table for Cb to G conversion */
} my_color_deconverter;
typedef my_color_deconverter * my_cconvert_ptr;
/**************** YCbCr -> RGB conversion: most common case **************/
/*
* YCbCr is defined per CCIR 601-1, except that Cb and Cr are
* normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5.
* The conversion equations to be implemented are therefore
* R = Y + 1.40200 * Cr
* G = Y - 0.34414 * Cb - 0.71414 * Cr
* B = Y + 1.77200 * Cb
* where Cb and Cr represent the incoming values less CENTERJSAMPLE.
* (These numbers are derived from TIFF 6.0 section 21, dated 3-June-92.)
*
* To avoid floating-point arithmetic, we represent the fractional constants
* as integers scaled up by 2^16 (about 4 digits precision); we have to divide
* the products by 2^16, with appropriate rounding, to get the correct answer.
* Notice that Y, being an integral input, does not contribute any fraction
* so it need not participate in the rounding.
*
* For even more speed, we avoid doing any multiplications in the inner loop
* by precalculating the constants times Cb and Cr for all possible values.
* For 8-bit JSAMPLEs this is very reasonable (only 256 entries per table);
* for 12-bit samples it is still acceptable. It's not very reasonable for
* 16-bit samples, but if you want lossless storage you shouldn't be changing
* colorspace anyway.
* The Cr=>R and Cb=>B values can be rounded to integers in advance; the
* values for the G calculation are left scaled up, since we must add them
* together before rounding.
*/
#define SCALEBITS 16 /* speediest right-shift on some machines */
#define ONE_HALF ( (INT32) 1 << ( SCALEBITS - 1 ) )
#define FIX( x ) ( (INT32) ( ( x ) * ( 1L << SCALEBITS ) + 0.5 ) )
/*
* Initialize tables for YCC->RGB colorspace conversion.
*/
LOCAL void
build_ycc_rgb_table( j_decompress_ptr cinfo ) {
my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
int i;
INT32 x;
SHIFT_TEMPS
cconvert->Cr_r_tab = (int *)
( *cinfo->mem->alloc_small )( (j_common_ptr) cinfo, JPOOL_IMAGE,
( MAXJSAMPLE + 1 ) * SIZEOF( int ) );
cconvert->Cb_b_tab = (int *)
( *cinfo->mem->alloc_small )( (j_common_ptr) cinfo, JPOOL_IMAGE,
( MAXJSAMPLE + 1 ) * SIZEOF( int ) );
cconvert->Cr_g_tab = (INT32 *)
( *cinfo->mem->alloc_small )( (j_common_ptr) cinfo, JPOOL_IMAGE,
( MAXJSAMPLE + 1 ) * SIZEOF( INT32 ) );
cconvert->Cb_g_tab = (INT32 *)
( *cinfo->mem->alloc_small )( (j_common_ptr) cinfo, JPOOL_IMAGE,
( MAXJSAMPLE + 1 ) * SIZEOF( INT32 ) );
for ( i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++ ) {
/* i is the actual input pixel value, in the range 0..MAXJSAMPLE */
/* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */
/* Cr=>R value is nearest int to 1.40200 * x */
cconvert->Cr_r_tab[i] = (int)
RIGHT_SHIFT( FIX( 1.40200 ) * x + ONE_HALF, SCALEBITS );
/* Cb=>B value is nearest int to 1.77200 * x */
cconvert->Cb_b_tab[i] = (int)
RIGHT_SHIFT( FIX( 1.77200 ) * x + ONE_HALF, SCALEBITS );
/* Cr=>G value is scaled-up -0.71414 * x */
cconvert->Cr_g_tab[i] = ( -FIX( 0.71414 ) ) * x;
/* Cb=>G value is scaled-up -0.34414 * x */
/* We also add in ONE_HALF so that need not do it in inner loop */
cconvert->Cb_g_tab[i] = ( -FIX( 0.34414 ) ) * x + ONE_HALF;
}
}
/*
* Convert some rows of samples to the output colorspace.
*
* Note that we change from noninterleaved, one-plane-per-component format
* to interleaved-pixel format. The output buffer is therefore three times
* as wide as the input buffer.
* A starting row offset is provided only for the input buffer. The caller
* can easily adjust the passed output_buf value to accommodate any row
* offset required on that side.
*/
METHODDEF void
ycc_rgb_convert( j_decompress_ptr cinfo,
JSAMPIMAGE input_buf, JDIMENSION input_row,
JSAMPARRAY output_buf, int num_rows ) {
my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
register int y, cb, cr;
register JSAMPROW outptr;
register JSAMPROW inptr0, inptr1, inptr2;
register JDIMENSION col;
JDIMENSION num_cols = cinfo->output_width;
/* copy these pointers into registers if possible */
register JSAMPLE * range_limit = cinfo->sample_range_limit;
register int * Crrtab = cconvert->Cr_r_tab;
register int * Cbbtab = cconvert->Cb_b_tab;
register INT32 * Crgtab = cconvert->Cr_g_tab;
register INT32 * Cbgtab = cconvert->Cb_g_tab;
SHIFT_TEMPS
while ( --num_rows >= 0 ) {
inptr0 = input_buf[0][input_row];
inptr1 = input_buf[1][input_row];
inptr2 = input_buf[2][input_row];
input_row++;
outptr = *output_buf++;
for ( col = 0; col < num_cols; col++ ) {
y = GETJSAMPLE( inptr0[col] );
cb = GETJSAMPLE( inptr1[col] );
cr = GETJSAMPLE( inptr2[col] );
/* Range-limiting is essential due to noise introduced by DCT losses. */
outptr[RGB_RED] = range_limit[y + Crrtab[cr]];
outptr[RGB_GREEN] = range_limit[y +
( (int) RIGHT_SHIFT( Cbgtab[cb] + Crgtab[cr],
SCALEBITS ) )];
outptr[RGB_BLUE] = range_limit[y + Cbbtab[cb]];
outptr += RGB_PIXELSIZE;
}
}
}
/**************** Cases other than YCbCr -> RGB **************/
/*
* Color conversion for no colorspace change: just copy the data,
* converting from separate-planes to interleaved representation.
*/
METHODDEF void
null_convert( j_decompress_ptr cinfo,
JSAMPIMAGE input_buf, JDIMENSION input_row,
JSAMPARRAY output_buf, int num_rows ) {
register JSAMPROW inptr, outptr;
register JDIMENSION count;
register int num_components = cinfo->num_components;
JDIMENSION num_cols = cinfo->output_width;
int ci;
while ( --num_rows >= 0 ) {
for ( ci = 0; ci < num_components; ci++ ) {
inptr = input_buf[ci][input_row];
outptr = output_buf[0] + ci;
for ( count = num_cols; count > 0; count-- ) {
*outptr = *inptr++;/* needn't bother with GETJSAMPLE() here */
outptr += num_components;
}
}
input_row++;
output_buf++;
}
}
/*
* Color conversion for grayscale: just copy the data.
* This also works for YCbCr -> grayscale conversion, in which
* we just copy the Y (luminance) component and ignore chrominance.
*/
METHODDEF void
grayscale_convert( j_decompress_ptr cinfo,
JSAMPIMAGE input_buf, JDIMENSION input_row,
JSAMPARRAY output_buf, int num_rows ) {
jcopy_sample_rows( input_buf[0], (int) input_row, output_buf, 0,
num_rows, cinfo->output_width );
}
/*
* Adobe-style YCCK->CMYK conversion.
* We convert YCbCr to R=1-C, G=1-M, and B=1-Y using the same
* conversion as above, while passing K (black) unchanged.
* We assume build_ycc_rgb_table has been called.
*/
METHODDEF void
ycck_cmyk_convert( j_decompress_ptr cinfo,
JSAMPIMAGE input_buf, JDIMENSION input_row,
JSAMPARRAY output_buf, int num_rows ) {
my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
register int y, cb, cr;
register JSAMPROW outptr;
register JSAMPROW inptr0, inptr1, inptr2, inptr3;
register JDIMENSION col;
JDIMENSION num_cols = cinfo->output_width;
/* copy these pointers into registers if possible */
register JSAMPLE * range_limit = cinfo->sample_range_limit;
register int * Crrtab = cconvert->Cr_r_tab;
register int * Cbbtab = cconvert->Cb_b_tab;
register INT32 * Crgtab = cconvert->Cr_g_tab;
register INT32 * Cbgtab = cconvert->Cb_g_tab;
SHIFT_TEMPS
while ( --num_rows >= 0 ) {
inptr0 = input_buf[0][input_row];
inptr1 = input_buf[1][input_row];
inptr2 = input_buf[2][input_row];
inptr3 = input_buf[3][input_row];
input_row++;
outptr = *output_buf++;
for ( col = 0; col < num_cols; col++ ) {
y = GETJSAMPLE( inptr0[col] );
cb = GETJSAMPLE( inptr1[col] );
cr = GETJSAMPLE( inptr2[col] );
/* Range-limiting is essential due to noise introduced by DCT losses. */
outptr[0] = range_limit[MAXJSAMPLE - ( y + Crrtab[cr] )];/* red */
outptr[1] = range_limit[MAXJSAMPLE - ( y + /* green */
( (int) RIGHT_SHIFT( Cbgtab[cb] + Crgtab[cr],
SCALEBITS ) ) )];
outptr[2] = range_limit[MAXJSAMPLE - ( y + Cbbtab[cb] )];/* blue */
/* K passes through unchanged */
outptr[3] = inptr3[col];/* don't need GETJSAMPLE here */
outptr += 4;
}
}
}
/*
* Empty method for start_pass.
*/
METHODDEF void
start_pass_dcolor( j_decompress_ptr cinfo ) {
/* no work needed */
}
/*
* Module initialization routine for output colorspace conversion.
*/
GLOBAL void
jinit_color_deconverter( j_decompress_ptr cinfo ) {
my_cconvert_ptr cconvert;
int ci;
cconvert = (my_cconvert_ptr)
( *cinfo->mem->alloc_small )( (j_common_ptr) cinfo, JPOOL_IMAGE,
SIZEOF( my_color_deconverter ) );
cinfo->cconvert = (struct jpeg_color_deconverter *) cconvert;
cconvert->pub.start_pass = start_pass_dcolor;
/* Make sure num_components agrees with jpeg_color_space */
switch ( cinfo->jpeg_color_space ) {
case JCS_GRAYSCALE:
if ( cinfo->num_components != 1 ) {
ERREXIT( cinfo, JERR_BAD_J_COLORSPACE );
}
break;
case JCS_RGB:
case JCS_YCbCr:
if ( cinfo->num_components != 3 ) {
ERREXIT( cinfo, JERR_BAD_J_COLORSPACE );
}
break;
case JCS_CMYK:
case JCS_YCCK:
if ( cinfo->num_components != 4 ) {
ERREXIT( cinfo, JERR_BAD_J_COLORSPACE );
}
break;
default: /* JCS_UNKNOWN can be anything */
if ( cinfo->num_components < 1 ) {
ERREXIT( cinfo, JERR_BAD_J_COLORSPACE );
}
break;
}
/* Set out_color_components and conversion method based on requested space.
* Also clear the component_needed flags for any unused components,
* so that earlier pipeline stages can avoid useless computation.
*/
switch ( cinfo->out_color_space ) {
case JCS_GRAYSCALE:
cinfo->out_color_components = 1;
if ( ( cinfo->jpeg_color_space == JCS_GRAYSCALE ) ||
( cinfo->jpeg_color_space == JCS_YCbCr ) ) {
cconvert->pub.color_convert = grayscale_convert;
/* For color->grayscale conversion, only the Y (0) component is needed */
for ( ci = 1; ci < cinfo->num_components; ci++ ) {
cinfo->comp_info[ci].component_needed = FALSE;
}
} else {
ERREXIT( cinfo, JERR_CONVERSION_NOTIMPL );
}
break;
case JCS_RGB:
cinfo->out_color_components = RGB_PIXELSIZE;
if ( cinfo->jpeg_color_space == JCS_YCbCr ) {
cconvert->pub.color_convert = ycc_rgb_convert;
build_ycc_rgb_table( cinfo );
} else if ( cinfo->jpeg_color_space == JCS_RGB && RGB_PIXELSIZE == 3 ) {
cconvert->pub.color_convert = null_convert;
} else {
ERREXIT( cinfo, JERR_CONVERSION_NOTIMPL );
}
break;
case JCS_CMYK:
cinfo->out_color_components = 4;
if ( cinfo->jpeg_color_space == JCS_YCCK ) {
cconvert->pub.color_convert = ycck_cmyk_convert;
build_ycc_rgb_table( cinfo );
} else if ( cinfo->jpeg_color_space == JCS_CMYK ) {
cconvert->pub.color_convert = null_convert;
} else {
ERREXIT( cinfo, JERR_CONVERSION_NOTIMPL );
}
break;
default:
/* Permit null conversion to same output space */
if ( cinfo->out_color_space == cinfo->jpeg_color_space ) {
cinfo->out_color_components = cinfo->num_components;
cconvert->pub.color_convert = null_convert;
} else {/* unsupported non-null conversion */
ERREXIT( cinfo, JERR_CONVERSION_NOTIMPL );
}
break;
}
if ( cinfo->quantize_colors ) {
cinfo->output_components = 1;
} /* single colormapped output component */
else {
cinfo->output_components = cinfo->out_color_components;
}
}
Reference in a new issue View git blame Copy permalink