/*
===========================================================================
Doom 3 BFG Edition GPL Source Code
Copyright (C) 1993-2012 id Software LLC, a ZeniMax Media company.
This file is part of the Doom 3 BFG Edition GPL Source Code ("Doom 3 BFG Edition Source Code").
Doom 3 BFG Edition Source Code is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
Doom 3 BFG Edition Source Code is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with Doom 3 BFG Edition Source Code. If not, see .
In addition, the Doom 3 BFG Edition Source Code is also subject to certain additional terms. You should have received a copy of these additional terms immediately following the terms and conditions of the GNU General Public License which accompanied the Doom 3 BFG Edition Source Code. If not, please request a copy in writing from id Software at the address below.
If you have questions concerning this license or the applicable additional terms, you may contact in writing id Software LLC, c/o ZeniMax Media Inc., Suite 120, Rockville, Maryland 20850 USA.
===========================================================================
*/
#pragma hdrstop
#include "../precompiled.h"
/*
=================
UpdateVertexIndex
=================
*/
ID_INLINE int UpdateVertexIndex( int vertexIndexNum[2], int *vertexRemap, int *vertexCopyIndex, int vertNum ) {
int s = INT32_SIGNBITSET( vertexRemap[vertNum] );
vertexIndexNum[0] = vertexRemap[vertNum];
vertexRemap[vertNum] = vertexIndexNum[s];
vertexIndexNum[1] += s;
vertexCopyIndex[vertexRemap[vertNum]] = vertNum;
return vertexRemap[vertNum];
}
/*
=================
idSurface::Split
=================
*/
int idSurface::Split( const idPlane &plane, const float epsilon, idSurface **front, idSurface **back, int *frontOnPlaneEdges, int *backOnPlaneEdges ) const {
float * dists;
float f;
byte * sides;
int counts[3];
int * edgeSplitVertex;
int numEdgeSplitVertexes;
int * vertexRemap[2];
int vertexIndexNum[2][2];
int * vertexCopyIndex[2];
int * indexPtr[2];
int indexNum[2];
int * index;
int * onPlaneEdges[2];
int numOnPlaneEdges[2];
int maxOnPlaneEdges;
int i;
idSurface * surface[2];
idDrawVert v;
dists = (float *) _alloca( verts.Num() * sizeof( float ) );
sides = (byte *) _alloca( verts.Num() * sizeof( byte ) );
counts[0] = counts[1] = counts[2] = 0;
// determine side for each vertex
for ( i = 0; i < verts.Num(); i++ ) {
dists[i] = f = plane.Distance( verts[i].xyz );
if ( f > epsilon ) {
sides[i] = SIDE_FRONT;
} else if ( f < -epsilon ) {
sides[i] = SIDE_BACK;
} else {
sides[i] = SIDE_ON;
}
counts[sides[i]]++;
}
*front = *back = NULL;
// if coplanar, put on the front side if the normals match
if ( !counts[SIDE_FRONT] && !counts[SIDE_BACK] ) {
f = ( verts[indexes[1]].xyz - verts[indexes[0]].xyz ).Cross( verts[indexes[0]].xyz - verts[indexes[2]].xyz ) * plane.Normal();
if ( IEEE_FLT_SIGNBITSET( f ) ) {
*back = new (TAG_IDLIB_SURFACE) idSurface( *this );
return SIDE_BACK;
} else {
*front = new (TAG_IDLIB_SURFACE) idSurface( *this );
return SIDE_FRONT;
}
}
// if nothing at the front of the clipping plane
if ( !counts[SIDE_FRONT] ) {
*back = new (TAG_IDLIB_SURFACE) idSurface( *this );
return SIDE_BACK;
}
// if nothing at the back of the clipping plane
if ( !counts[SIDE_BACK] ) {
*front = new (TAG_IDLIB_SURFACE) idSurface( *this );
return SIDE_FRONT;
}
// allocate front and back surface
*front = surface[0] = new (TAG_IDLIB_SURFACE) idSurface();
*back = surface[1] = new (TAG_IDLIB_SURFACE) idSurface();
edgeSplitVertex = (int *) _alloca( edges.Num() * sizeof( int ) );
numEdgeSplitVertexes = 0;
maxOnPlaneEdges = 4 * counts[SIDE_ON];
counts[SIDE_FRONT] = counts[SIDE_BACK] = counts[SIDE_ON] = 0;
// split edges
for ( i = 0; i < edges.Num(); i++ ) {
int v0 = edges[i].verts[0];
int v1 = edges[i].verts[1];
int sidesOr = ( sides[v0] | sides[v1] );
// if both vertexes are on the same side or one is on the clipping plane
if ( !( sides[v0] ^ sides[v1] ) || ( sidesOr & SIDE_ON ) ) {
edgeSplitVertex[i] = -1;
counts[sidesOr & SIDE_BACK]++;
counts[SIDE_ON] += ( sidesOr & SIDE_ON ) >> 1;
} else {
f = dists[v0] / ( dists[v0] - dists[v1] );
v.LerpAll( verts[v0], verts[v1], f );
edgeSplitVertex[i] = numEdgeSplitVertexes++;
surface[0]->verts.Append( v );
surface[1]->verts.Append( v );
}
}
// each edge is shared by at most two triangles, as such there can never be more indexes than twice the number of edges
surface[0]->indexes.Resize( ( ( counts[SIDE_FRONT] + counts[SIDE_ON] ) * 2 ) + ( numEdgeSplitVertexes * 4 ) );
surface[1]->indexes.Resize( ( ( counts[SIDE_BACK] + counts[SIDE_ON] ) * 2 ) + ( numEdgeSplitVertexes * 4 ) );
// allocate indexes to construct the triangle indexes for the front and back surface
vertexRemap[0] = (int *) _alloca( verts.Num() * sizeof( int ) );
memset( vertexRemap[0], -1, verts.Num() * sizeof( int ) );
vertexRemap[1] = (int *) _alloca( verts.Num() * sizeof( int ) );
memset( vertexRemap[1], -1, verts.Num() * sizeof( int ) );
vertexCopyIndex[0] = (int *) _alloca( ( numEdgeSplitVertexes + verts.Num() ) * sizeof( int ) );
vertexCopyIndex[1] = (int *) _alloca( ( numEdgeSplitVertexes + verts.Num() ) * sizeof( int ) );
vertexIndexNum[0][0] = vertexIndexNum[1][0] = 0;
vertexIndexNum[0][1] = vertexIndexNum[1][1] = numEdgeSplitVertexes;
indexPtr[0] = surface[0]->indexes.Ptr();
indexPtr[1] = surface[1]->indexes.Ptr();
indexNum[0] = surface[0]->indexes.Num();
indexNum[1] = surface[1]->indexes.Num();
maxOnPlaneEdges += 4 * numEdgeSplitVertexes;
// allocate one more in case no triangles are actually split which may happen for a disconnected surface
onPlaneEdges[0] = (int *) _alloca( ( maxOnPlaneEdges + 1 ) * sizeof( int ) );
onPlaneEdges[1] = (int *) _alloca( ( maxOnPlaneEdges + 1 ) * sizeof( int ) );
numOnPlaneEdges[0] = numOnPlaneEdges[1] = 0;
// split surface triangles
for ( i = 0; i < edgeIndexes.Num(); i += 3 ) {
int e0, e1, e2, v0, v1, v2, s, n;
e0 = abs( edgeIndexes[i+0] );
e1 = abs( edgeIndexes[i+1] );
e2 = abs( edgeIndexes[i+2] );
v0 = indexes[i+0];
v1 = indexes[i+1];
v2 = indexes[i+2];
switch( ( INT32_SIGNBITSET( edgeSplitVertex[e0] ) | ( INT32_SIGNBITSET( edgeSplitVertex[e1] ) << 1 ) | ( INT32_SIGNBITSET( edgeSplitVertex[e2] ) << 2 ) ) ^ 7 ) {
case 0: { // no edges split
if ( ( sides[v0] & sides[v1] & sides[v2] ) & SIDE_ON ) {
// coplanar
f = ( verts[v1].xyz - verts[v0].xyz ).Cross( verts[v0].xyz - verts[v2].xyz ) * plane.Normal();
s = IEEE_FLT_SIGNBITSET( f );
} else {
s = ( sides[v0] | sides[v1] | sides[v2] ) & SIDE_BACK;
}
n = indexNum[s];
onPlaneEdges[s][numOnPlaneEdges[s]] = n;
numOnPlaneEdges[s] += ( sides[v0] & sides[v1] ) >> 1;
onPlaneEdges[s][numOnPlaneEdges[s]] = n+1;
numOnPlaneEdges[s] += ( sides[v1] & sides[v2] ) >> 1;
onPlaneEdges[s][numOnPlaneEdges[s]] = n+2;
numOnPlaneEdges[s] += ( sides[v2] & sides[v0] ) >> 1;
index = indexPtr[s];
index[n++] = UpdateVertexIndex( vertexIndexNum[s], vertexRemap[s], vertexCopyIndex[s], v0 );
index[n++] = UpdateVertexIndex( vertexIndexNum[s], vertexRemap[s], vertexCopyIndex[s], v1 );
index[n++] = UpdateVertexIndex( vertexIndexNum[s], vertexRemap[s], vertexCopyIndex[s], v2 );
indexNum[s] = n;
break;
}
case 1: { // first edge split
s = sides[v0] & SIDE_BACK;
n = indexNum[s];
onPlaneEdges[s][numOnPlaneEdges[s]++] = n;
index = indexPtr[s];
index[n++] = edgeSplitVertex[e0];
index[n++] = UpdateVertexIndex( vertexIndexNum[s], vertexRemap[s], vertexCopyIndex[s], v2 );
index[n++] = UpdateVertexIndex( vertexIndexNum[s], vertexRemap[s], vertexCopyIndex[s], v0 );
indexNum[s] = n;
s ^= 1;
n = indexNum[s];
onPlaneEdges[s][numOnPlaneEdges[s]++] = n;
index = indexPtr[s];
index[n++] = UpdateVertexIndex( vertexIndexNum[s], vertexRemap[s], vertexCopyIndex[s], v2 );
index[n++] = edgeSplitVertex[e0];
index[n++] = UpdateVertexIndex( vertexIndexNum[s], vertexRemap[s], vertexCopyIndex[s], v1 );
indexNum[s] = n;
break;
}
case 2: { // second edge split
s = sides[v1] & SIDE_BACK;
n = indexNum[s];
onPlaneEdges[s][numOnPlaneEdges[s]++] = n;
index = indexPtr[s];
index[n++] = edgeSplitVertex[e1];
index[n++] = UpdateVertexIndex( vertexIndexNum[s], vertexRemap[s], vertexCopyIndex[s], v0 );
index[n++] = UpdateVertexIndex( vertexIndexNum[s], vertexRemap[s], vertexCopyIndex[s], v1 );
indexNum[s] = n;
s ^= 1;
n = indexNum[s];
onPlaneEdges[s][numOnPlaneEdges[s]++] = n;
index = indexPtr[s];
index[n++] = UpdateVertexIndex( vertexIndexNum[s], vertexRemap[s], vertexCopyIndex[s], v0 );
index[n++] = edgeSplitVertex[e1];
index[n++] = UpdateVertexIndex( vertexIndexNum[s], vertexRemap[s], vertexCopyIndex[s], v2 );
indexNum[s] = n;
break;
}
case 3: { // first and second edge split
s = sides[v1] & SIDE_BACK;
n = indexNum[s];
onPlaneEdges[s][numOnPlaneEdges[s]++] = n;
index = indexPtr[s];
index[n++] = edgeSplitVertex[e1];
index[n++] = edgeSplitVertex[e0];
index[n++] = UpdateVertexIndex( vertexIndexNum[s], vertexRemap[s], vertexCopyIndex[s], v1 );
indexNum[s] = n;
s ^= 1;
n = indexNum[s];
onPlaneEdges[s][numOnPlaneEdges[s]++] = n;
index = indexPtr[s];
index[n++] = edgeSplitVertex[e0];
index[n++] = edgeSplitVertex[e1];
index[n++] = UpdateVertexIndex( vertexIndexNum[s], vertexRemap[s], vertexCopyIndex[s], v0 );
index[n++] = edgeSplitVertex[e1];
index[n++] = UpdateVertexIndex( vertexIndexNum[s], vertexRemap[s], vertexCopyIndex[s], v2 );
index[n++] = UpdateVertexIndex( vertexIndexNum[s], vertexRemap[s], vertexCopyIndex[s], v0 );
indexNum[s] = n;
break;
}
case 4: { // third edge split
s = sides[v2] & SIDE_BACK;
n = indexNum[s];
onPlaneEdges[s][numOnPlaneEdges[s]++] = n;
index = indexPtr[s];
index[n++] = edgeSplitVertex[e2];
index[n++] = UpdateVertexIndex( vertexIndexNum[s], vertexRemap[s], vertexCopyIndex[s], v1 );
index[n++] = UpdateVertexIndex( vertexIndexNum[s], vertexRemap[s], vertexCopyIndex[s], v2 );
indexNum[s] = n;
s ^= 1;
n = indexNum[s];
onPlaneEdges[s][numOnPlaneEdges[s]++] = n;
index = indexPtr[s];
index[n++] = UpdateVertexIndex( vertexIndexNum[s], vertexRemap[s], vertexCopyIndex[s], v1 );
index[n++] = edgeSplitVertex[e2];
index[n++] = UpdateVertexIndex( vertexIndexNum[s], vertexRemap[s], vertexCopyIndex[s], v0 );
indexNum[s] = n;
break;
}
case 5: { // first and third edge split
s = sides[v0] & SIDE_BACK;
n = indexNum[s];
onPlaneEdges[s][numOnPlaneEdges[s]++] = n;
index = indexPtr[s];
index[n++] = edgeSplitVertex[e0];
index[n++] = edgeSplitVertex[e2];
index[n++] = UpdateVertexIndex( vertexIndexNum[s], vertexRemap[s], vertexCopyIndex[s], v0 );
indexNum[s] = n;
s ^= 1;
n = indexNum[s];
onPlaneEdges[s][numOnPlaneEdges[s]++] = n;
index = indexPtr[s];
index[n++] = edgeSplitVertex[e2];
index[n++] = edgeSplitVertex[e0];
index[n++] = UpdateVertexIndex( vertexIndexNum[s], vertexRemap[s], vertexCopyIndex[s], v1 );
index[n++] = UpdateVertexIndex( vertexIndexNum[s], vertexRemap[s], vertexCopyIndex[s], v1 );
index[n++] = UpdateVertexIndex( vertexIndexNum[s], vertexRemap[s], vertexCopyIndex[s], v2 );
index[n++] = edgeSplitVertex[e2];
indexNum[s] = n;
break;
}
case 6: { // second and third edge split
s = sides[v2] & SIDE_BACK;
n = indexNum[s];
onPlaneEdges[s][numOnPlaneEdges[s]++] = n;
index = indexPtr[s];
index[n++] = edgeSplitVertex[e2];
index[n++] = edgeSplitVertex[e1];
index[n++] = UpdateVertexIndex( vertexIndexNum[s], vertexRemap[s], vertexCopyIndex[s], v2 );
indexNum[s] = n;
s ^= 1;
n = indexNum[s];
onPlaneEdges[s][numOnPlaneEdges[s]++] = n;
index = indexPtr[s];
index[n++] = edgeSplitVertex[e1];
index[n++] = edgeSplitVertex[e2];
index[n++] = UpdateVertexIndex( vertexIndexNum[s], vertexRemap[s], vertexCopyIndex[s], v1 );
index[n++] = UpdateVertexIndex( vertexIndexNum[s], vertexRemap[s], vertexCopyIndex[s], v0 );
index[n++] = UpdateVertexIndex( vertexIndexNum[s], vertexRemap[s], vertexCopyIndex[s], v1 );
index[n++] = edgeSplitVertex[e2];
indexNum[s] = n;
break;
}
}
}
surface[0]->indexes.SetNum( indexNum[0] );
surface[1]->indexes.SetNum( indexNum[1] );
// copy vertexes
surface[0]->verts.SetNum( vertexIndexNum[0][1] );
index = vertexCopyIndex[0];
for ( i = numEdgeSplitVertexes; i < surface[0]->verts.Num(); i++ ) {
surface[0]->verts[i] = verts[index[i]];
}
surface[1]->verts.SetNum( vertexIndexNum[1][1] );
index = vertexCopyIndex[1];
for ( i = numEdgeSplitVertexes; i < surface[1]->verts.Num(); i++ ) {
surface[1]->verts[i] = verts[index[i]];
}
// generate edge indexes
surface[0]->GenerateEdgeIndexes();
surface[1]->GenerateEdgeIndexes();
if ( frontOnPlaneEdges ) {
memcpy( frontOnPlaneEdges, onPlaneEdges[0], numOnPlaneEdges[0] * sizeof( int ) );
frontOnPlaneEdges[numOnPlaneEdges[0]] = -1;
}
if ( backOnPlaneEdges ) {
memcpy( backOnPlaneEdges, onPlaneEdges[1], numOnPlaneEdges[1] * sizeof( int ) );
backOnPlaneEdges[numOnPlaneEdges[1]] = -1;
}
return SIDE_CROSS;
}
/*
=================
idSurface::ClipInPlace
=================
*/
bool idSurface::ClipInPlace( const idPlane &plane, const float epsilon, const bool keepOn ) {
float * dists;
float f;
byte * sides;
int counts[3];
int i;
int * edgeSplitVertex;
int * vertexRemap;
int vertexIndexNum[2];
int * vertexCopyIndex;
int * indexPtr;
int indexNum;
int numEdgeSplitVertexes;
idDrawVert v;
idList newVerts;
idList newIndexes;
dists = (float *) _alloca( verts.Num() * sizeof( float ) );
sides = (byte *) _alloca( verts.Num() * sizeof( byte ) );
counts[0] = counts[1] = counts[2] = 0;
// determine side for each vertex
for ( i = 0; i < verts.Num(); i++ ) {
dists[i] = f = plane.Distance( verts[i].xyz );
if ( f > epsilon ) {
sides[i] = SIDE_FRONT;
} else if ( f < -epsilon ) {
sides[i] = SIDE_BACK;
} else {
sides[i] = SIDE_ON;
}
counts[sides[i]]++;
}
// if coplanar, put on the front side if the normals match
if ( !counts[SIDE_FRONT] && !counts[SIDE_BACK] ) {
f = ( verts[indexes[1]].xyz - verts[indexes[0]].xyz ).Cross( verts[indexes[0]].xyz - verts[indexes[2]].xyz ) * plane.Normal();
if ( IEEE_FLT_SIGNBITSET( f ) ) {
Clear();
return false;
} else {
return true;
}
}
// if nothing at the front of the clipping plane
if ( !counts[SIDE_FRONT] ) {
Clear();
return false;
}
// if nothing at the back of the clipping plane
if ( !counts[SIDE_BACK] ) {
return true;
}
edgeSplitVertex = (int *) _alloca( edges.Num() * sizeof( int ) );
numEdgeSplitVertexes = 0;
counts[SIDE_FRONT] = counts[SIDE_BACK] = 0;
// split edges
for ( i = 0; i < edges.Num(); i++ ) {
int v0 = edges[i].verts[0];
int v1 = edges[i].verts[1];
// if both vertexes are on the same side or one is on the clipping plane
if ( !( sides[v0] ^ sides[v1] ) || ( ( sides[v0] | sides[v1] ) & SIDE_ON ) ) {
edgeSplitVertex[i] = -1;
counts[(sides[v0]|sides[v1]) & SIDE_BACK]++;
} else {
f = dists[v0] / ( dists[v0] - dists[v1] );
v.LerpAll( verts[v0], verts[v1], f );
edgeSplitVertex[i] = numEdgeSplitVertexes++;
newVerts.Append( v );
}
}
// each edge is shared by at most two triangles, as such there can never be
// more indexes than twice the number of edges
newIndexes.Resize( ( counts[SIDE_FRONT] << 1 ) + ( numEdgeSplitVertexes << 2 ) );
// allocate indexes to construct the triangle indexes for the front and back surface
vertexRemap = (int *) _alloca( verts.Num() * sizeof( int ) );
memset( vertexRemap, -1, verts.Num() * sizeof( int ) );
vertexCopyIndex = (int *) _alloca( ( numEdgeSplitVertexes + verts.Num() ) * sizeof( int ) );
vertexIndexNum[0] = 0;
vertexIndexNum[1] = numEdgeSplitVertexes;
indexPtr = newIndexes.Ptr();
indexNum = newIndexes.Num();
// split surface triangles
for ( i = 0; i < edgeIndexes.Num(); i += 3 ) {
int e0, e1, e2, v0, v1, v2;
e0 = abs( edgeIndexes[i+0] );
e1 = abs( edgeIndexes[i+1] );
e2 = abs( edgeIndexes[i+2] );
v0 = indexes[i+0];
v1 = indexes[i+1];
v2 = indexes[i+2];
switch( ( INT32_SIGNBITSET( edgeSplitVertex[e0] ) | ( INT32_SIGNBITSET( edgeSplitVertex[e1] ) << 1 ) | ( INT32_SIGNBITSET( edgeSplitVertex[e2] ) << 2 ) ) ^ 7 ) {
case 0: { // no edges split
if ( ( sides[v0] | sides[v1] | sides[v2] ) & SIDE_BACK ) {
break;
}
if ( ( sides[v0] & sides[v1] & sides[v2] ) & SIDE_ON ) {
// coplanar
if ( !keepOn ) {
break;
}
f = ( verts[v1].xyz - verts[v0].xyz ).Cross( verts[v0].xyz - verts[v2].xyz ) * plane.Normal();
if ( IEEE_FLT_SIGNBITSET( f ) ) {
break;
}
}
indexPtr[indexNum++] = UpdateVertexIndex( vertexIndexNum, vertexRemap, vertexCopyIndex, v0 );
indexPtr[indexNum++] = UpdateVertexIndex( vertexIndexNum, vertexRemap, vertexCopyIndex, v1 );
indexPtr[indexNum++] = UpdateVertexIndex( vertexIndexNum, vertexRemap, vertexCopyIndex, v2 );
break;
}
case 1: { // first edge split
if ( !( sides[v0] & SIDE_BACK ) ) {
indexPtr[indexNum++] = UpdateVertexIndex( vertexIndexNum, vertexRemap, vertexCopyIndex, v0 );
indexPtr[indexNum++] = edgeSplitVertex[e0];
indexPtr[indexNum++] = UpdateVertexIndex( vertexIndexNum, vertexRemap, vertexCopyIndex, v2 );
} else {
indexPtr[indexNum++] = edgeSplitVertex[e0];
indexPtr[indexNum++] = UpdateVertexIndex( vertexIndexNum, vertexRemap, vertexCopyIndex, v1 );
indexPtr[indexNum++] = UpdateVertexIndex( vertexIndexNum, vertexRemap, vertexCopyIndex, v2 );
}
break;
}
case 2: { // second edge split
if ( !( sides[v1] & SIDE_BACK ) ) {
indexPtr[indexNum++] = UpdateVertexIndex( vertexIndexNum, vertexRemap, vertexCopyIndex, v1 );
indexPtr[indexNum++] = edgeSplitVertex[e1];
indexPtr[indexNum++] = UpdateVertexIndex( vertexIndexNum, vertexRemap, vertexCopyIndex, v0 );
} else {
indexPtr[indexNum++] = edgeSplitVertex[e1];
indexPtr[indexNum++] = UpdateVertexIndex( vertexIndexNum, vertexRemap, vertexCopyIndex, v2 );
indexPtr[indexNum++] = UpdateVertexIndex( vertexIndexNum, vertexRemap, vertexCopyIndex, v0 );
}
break;
}
case 3: { // first and second edge split
if ( !( sides[v1] & SIDE_BACK ) ) {
indexPtr[indexNum++] = UpdateVertexIndex( vertexIndexNum, vertexRemap, vertexCopyIndex, v1 );
indexPtr[indexNum++] = edgeSplitVertex[e1];
indexPtr[indexNum++] = edgeSplitVertex[e0];
} else {
indexPtr[indexNum++] = UpdateVertexIndex( vertexIndexNum, vertexRemap, vertexCopyIndex, v0 );
indexPtr[indexNum++] = edgeSplitVertex[e0];
indexPtr[indexNum++] = edgeSplitVertex[e1];
indexPtr[indexNum++] = edgeSplitVertex[e1];
indexPtr[indexNum++] = UpdateVertexIndex( vertexIndexNum, vertexRemap, vertexCopyIndex, v2 );
indexPtr[indexNum++] = UpdateVertexIndex( vertexIndexNum, vertexRemap, vertexCopyIndex, v0 );
}
break;
}
case 4: { // third edge split
if ( !( sides[v2] & SIDE_BACK ) ) {
indexPtr[indexNum++] = UpdateVertexIndex( vertexIndexNum, vertexRemap, vertexCopyIndex, v2 );
indexPtr[indexNum++] = edgeSplitVertex[e2];
indexPtr[indexNum++] = UpdateVertexIndex( vertexIndexNum, vertexRemap, vertexCopyIndex, v1 );
} else {
indexPtr[indexNum++] = edgeSplitVertex[e2];
indexPtr[indexNum++] = UpdateVertexIndex( vertexIndexNum, vertexRemap, vertexCopyIndex, v0 );
indexPtr[indexNum++] = UpdateVertexIndex( vertexIndexNum, vertexRemap, vertexCopyIndex, v1 );
}
break;
}
case 5: { // first and third edge split
if ( !( sides[v0] & SIDE_BACK ) ) {
indexPtr[indexNum++] = UpdateVertexIndex( vertexIndexNum, vertexRemap, vertexCopyIndex, v0 );
indexPtr[indexNum++] = edgeSplitVertex[e0];
indexPtr[indexNum++] = edgeSplitVertex[e2];
} else {
indexPtr[indexNum++] = edgeSplitVertex[e0];
indexPtr[indexNum++] = UpdateVertexIndex( vertexIndexNum, vertexRemap, vertexCopyIndex, v1 );
indexPtr[indexNum++] = edgeSplitVertex[e2];
indexPtr[indexNum++] = UpdateVertexIndex( vertexIndexNum, vertexRemap, vertexCopyIndex, v1 );
indexPtr[indexNum++] = UpdateVertexIndex( vertexIndexNum, vertexRemap, vertexCopyIndex, v2 );
indexPtr[indexNum++] = edgeSplitVertex[e2];
}
break;
}
case 6: { // second and third edge split
if ( !( sides[v2] & SIDE_BACK ) ) {
indexPtr[indexNum++] = UpdateVertexIndex( vertexIndexNum, vertexRemap, vertexCopyIndex, v2 );
indexPtr[indexNum++] = edgeSplitVertex[e2];
indexPtr[indexNum++] = edgeSplitVertex[e1];
} else {
indexPtr[indexNum++] = edgeSplitVertex[e2];
indexPtr[indexNum++] = UpdateVertexIndex( vertexIndexNum, vertexRemap, vertexCopyIndex, v1 );
indexPtr[indexNum++] = edgeSplitVertex[e1];
indexPtr[indexNum++] = UpdateVertexIndex( vertexIndexNum, vertexRemap, vertexCopyIndex, v0 );
indexPtr[indexNum++] = UpdateVertexIndex( vertexIndexNum, vertexRemap, vertexCopyIndex, v1 );
indexPtr[indexNum++] = edgeSplitVertex[e2];
}
break;
}
}
}
newIndexes.SetNum( indexNum );
// copy vertexes
newVerts.SetNum( vertexIndexNum[1] );
for ( i = numEdgeSplitVertexes; i < newVerts.Num(); i++ ) {
newVerts[i] = verts[vertexCopyIndex[i]];
}
// copy back to this surface
indexes = newIndexes;
verts = newVerts;
GenerateEdgeIndexes();
return true;
}
/*
=============
idSurface::IsConnected
=============
*/
bool idSurface::IsConnected() const {
int i, j, numIslands, numTris;
int queueStart, queueEnd;
int *queue, *islandNum;
int curTri, nextTri, edgeNum;
const int *index;
numIslands = 0;
numTris = indexes.Num() / 3;
islandNum = (int *) _alloca16( numTris * sizeof( int ) );
memset( islandNum, -1, numTris * sizeof( int ) );
queue = (int *) _alloca16( numTris * sizeof( int ) );
for ( i = 0; i < numTris; i++ ) {
if ( islandNum[i] != -1 ) {
continue;
}
queueStart = 0;
queueEnd = 1;
queue[0] = i;
islandNum[i] = numIslands;
for ( curTri = queue[queueStart]; queueStart < queueEnd; curTri = queue[++queueStart] ) {
index = &edgeIndexes[curTri * 3];
for ( j = 0; j < 3; j++ ) {
edgeNum = index[j];
nextTri = edges[abs(edgeNum)].tris[INT32_SIGNBITNOTSET(edgeNum)];
if ( nextTri == -1 ) {
continue;
}
nextTri /= 3;
if ( islandNum[nextTri] != -1 ) {
continue;
}
queue[queueEnd++] = nextTri;
islandNum[nextTri] = numIslands;
}
}
numIslands++;
}
return ( numIslands == 1 );
}
/*
=================
idSurface::IsClosed
=================
*/
bool idSurface::IsClosed() const {
for ( int i = 0; i < edges.Num(); i++ ) {
if ( edges[i].tris[0] < 0 || edges[i].tris[1] < 0 ) {
return false;
}
}
return true;
}
/*
=============
idSurface::IsPolytope
=============
*/
bool idSurface::IsPolytope( const float epsilon ) const {
int i, j;
idPlane plane;
if ( !IsClosed() ) {
return false;
}
for ( i = 0; i < indexes.Num(); i += 3 ) {
plane.FromPoints( verts[indexes[i+0]].xyz, verts[indexes[i+1]].xyz, verts[indexes[i+2]].xyz );
for ( j = 0; j < verts.Num(); j++ ) {
if ( plane.Side( verts[j].xyz, epsilon ) == SIDE_FRONT ) {
return false;
}
}
}
return true;
}
/*
=============
idSurface::PlaneDistance
=============
*/
float idSurface::PlaneDistance( const idPlane &plane ) const {
int i;
float d, min, max;
min = idMath::INFINITY;
max = -min;
for ( i = 0; i < verts.Num(); i++ ) {
d = plane.Distance( verts[i].xyz );
if ( d < min ) {
min = d;
if ( IEEE_FLT_SIGNBITSET( min ) & IEEE_FLT_SIGNBITNOTSET( max ) ) {
return 0.0f;
}
}
if ( d > max ) {
max = d;
if ( IEEE_FLT_SIGNBITSET( min ) & IEEE_FLT_SIGNBITNOTSET( max ) ) {
return 0.0f;
}
}
}
if ( IEEE_FLT_SIGNBITNOTSET( min ) ) {
return min;
}
if ( IEEE_FLT_SIGNBITSET( max ) ) {
return max;
}
return 0.0f;
}
/*
=============
idSurface::PlaneSide
=============
*/
int idSurface::PlaneSide( const idPlane &plane, const float epsilon ) const {
bool front, back;
int i;
float d;
front = false;
back = false;
for ( i = 0; i < verts.Num(); i++ ) {
d = plane.Distance( verts[i].xyz );
if ( d < -epsilon ) {
if ( front ) {
return SIDE_CROSS;
}
back = true;
continue;
}
else if ( d > epsilon ) {
if ( back ) {
return SIDE_CROSS;
}
front = true;
continue;
}
}
if ( back ) {
return SIDE_BACK;
}
if ( front ) {
return SIDE_FRONT;
}
return SIDE_ON;
}
/*
=================
idSurface::LineIntersection
=================
*/
bool idSurface::LineIntersection( const idVec3 &start, const idVec3 &end, bool backFaceCull ) const {
float scale;
RayIntersection( start, end - start, scale, false );
return ( scale >= 0.0f && scale <= 1.0f );
}
/*
=================
idSurface::RayIntersection
=================
*/
bool idSurface::RayIntersection( const idVec3 &start, const idVec3 &dir, float &scale, bool backFaceCull ) const {
int i, i0, i1, i2, s0, s1, s2;
float d, s;
byte *sidedness;
idPluecker rayPl, pl;
idPlane plane;
sidedness = (byte *)_alloca( edges.Num() * sizeof(byte) );
scale = idMath::INFINITY;
rayPl.FromRay( start, dir );
// ray sidedness for edges
for ( i = 0; i < edges.Num(); i++ ) {
pl.FromLine( verts[ edges[i].verts[1] ].xyz, verts[ edges[i].verts[0] ].xyz );
d = pl.PermutedInnerProduct( rayPl );
sidedness[ i ] = IEEE_FLT_SIGNBITSET( d );
}
// test triangles
for ( i = 0; i < edgeIndexes.Num(); i += 3 ) {
i0 = edgeIndexes[i+0];
i1 = edgeIndexes[i+1];
i2 = edgeIndexes[i+2];
s0 = sidedness[abs(i0)] ^ INT32_SIGNBITSET( i0 );
s1 = sidedness[abs(i1)] ^ INT32_SIGNBITSET( i1 );
s2 = sidedness[abs(i2)] ^ INT32_SIGNBITSET( i2 );
if ( s0 & s1 & s2 ) {
plane.FromPoints( verts[indexes[i+0]].xyz, verts[indexes[i+1]].xyz, verts[indexes[i+2]].xyz );
plane.RayIntersection( start, dir, s );
if ( idMath::Fabs( s ) < idMath::Fabs( scale ) ) {
scale = s;
}
} else if ( !backFaceCull && !(s0 | s1 | s2) ) {
plane.FromPoints( verts[indexes[i+0]].xyz, verts[indexes[i+1]].xyz, verts[indexes[i+2]].xyz );
plane.RayIntersection( start, dir, s );
if ( idMath::Fabs( s ) < idMath::Fabs( scale ) ) {
scale = s;
}
}
}
if ( idMath::Fabs( scale ) < idMath::INFINITY ) {
return true;
}
return false;
}
/*
=================
idSurface::GenerateEdgeIndexes
Assumes each edge is shared by at most two triangles.
=================
*/
void idSurface::GenerateEdgeIndexes() {
int i, j, i0, i1, i2, s, v0, v1, edgeNum;
int *index, *vertexEdges, *edgeChain;
surfaceEdge_t e[3];
vertexEdges = (int *) _alloca16( verts.Num() * sizeof( int ) );
memset( vertexEdges, -1, verts.Num() * sizeof( int ) );
edgeChain = (int *) _alloca16( indexes.Num() * sizeof( int ) );
edgeIndexes.SetNum( indexes.Num() );
edges.Clear();
// the first edge is a dummy
e[0].verts[0] = e[0].verts[1] = e[0].tris[0] = e[0].tris[1] = 0;
edges.Append( e[0] );
for ( i = 0; i < indexes.Num(); i += 3 ) {
index = indexes.Ptr() + i;
// vertex numbers
i0 = index[0];
i1 = index[1];
i2 = index[2];
// setup edges each with smallest vertex number first
s = INT32_SIGNBITSET(i1 - i0);
e[0].verts[0] = index[s];
e[0].verts[1] = index[s^1];
s = INT32_SIGNBITSET(i2 - i1) + 1;
e[1].verts[0] = index[s];
e[1].verts[1] = index[s^3];
s = INT32_SIGNBITSET(i2 - i0) << 1;
e[2].verts[0] = index[s];
e[2].verts[1] = index[s^2];
// get edges
for ( j = 0; j < 3; j++ ) {
v0 = e[j].verts[0];
v1 = e[j].verts[1];
for ( edgeNum = vertexEdges[v0]; edgeNum >= 0; edgeNum = edgeChain[edgeNum] ) {
if ( edges[edgeNum].verts[1] == v1 ) {
break;
}
}
// if the edge does not yet exist
if ( edgeNum < 0 ) {
e[j].tris[0] = e[j].tris[1] = -1;
edgeNum = edges.Append( e[j] );
edgeChain[edgeNum] = vertexEdges[v0];
vertexEdges[v0] = edgeNum;
}
// update edge index and edge tri references
if ( index[j] == v0 ) {
assert( edges[edgeNum].tris[0] == -1 ); // edge may not be shared by more than two triangles
edges[edgeNum].tris[0] = i;
edgeIndexes[i+j] = edgeNum;
} else {
assert( edges[edgeNum].tris[1] == -1 ); // edge may not be shared by more than two triangles
edges[edgeNum].tris[1] = i;
edgeIndexes[i+j] = -edgeNum;
}
}
}
}
/*
=================
idSurface::FindEdge
=================
*/
int idSurface::FindEdge( int v1, int v2 ) const {
int i, firstVert, secondVert;
if ( v1 < v2 ) {
firstVert = v1;
secondVert = v2;
} else {
firstVert = v2;
secondVert = v1;
}
for ( i = 1; i < edges.Num(); i++ ) {
if ( edges[i].verts[0] == firstVert ) {
if ( edges[i].verts[1] == secondVert ) {
break;
}
}
}
if ( i < edges.Num() ) {
return v1 < v2 ? i : -i;
}
return 0;
}