/*
===========================================================================

Doom 3 BFG Edition GPL Source Code
Copyright (C) 1993-2012 id Software LLC, a ZeniMax Media company. 

This file is part of the Doom 3 BFG Edition GPL Source Code ("Doom 3 BFG Edition Source Code").  

Doom 3 BFG Edition Source Code is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

Doom 3 BFG Edition Source Code is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with Doom 3 BFG Edition Source Code.  If not, see <http://www.gnu.org/licenses/>.

In addition, the Doom 3 BFG Edition Source Code is also subject to certain additional terms. You should have received a copy of these additional terms immediately following the terms and conditions of the GNU General Public License which accompanied the Doom 3 BFG Edition Source Code.  If not, please request a copy in writing from id Software at the address below.

If you have questions concerning this license or the applicable additional terms, you may contact in writing id Software LLC, c/o ZeniMax Media Inc., Suite 120, Rockville, Maryland 20850 USA.

===========================================================================
*/

#ifndef __DRAWVERT_H__
#define __DRAWVERT_H__

// The hardware converts a byte to a float by division with 255 and in the
// vertex programs we convert the floating-point value in the range [0, 1]
// to the range [-1, 1] by multiplying with 2 and subtracting 1.
#define VERTEX_BYTE_TO_FLOAT( x )		( (x) * ( 2.0f / 255.0f ) - 1.0f )
#define VERTEX_FLOAT_TO_BYTE( x )		idMath::Ftob( ( (x) + 1.0f ) * ( 255.0f / 2.0f ) + 0.5f )

// The hardware converts a byte to a float by division with 255 and in the
// fragment programs we convert the floating-point value in the range [0, 1]
// to the range [-1, 1] by multiplying with 2 and subtracting 1.
// This is the conventional OpenGL mapping which specifies an exact
// representation for -1 and +1 but not 0. The DirectX 10 mapping is
// in the comments which specifies a non-linear mapping with an exact
// representation of -1, 0 and +1 but -1 is represented twice.
#define NORMALMAP_BYTE_TO_FLOAT( x )	VERTEX_BYTE_TO_FLOAT( x )	//( (x) - 128.0f ) * ( 1.0f / 127.0f )
#define NORMALMAP_FLOAT_TO_BYTE( x )	VERTEX_FLOAT_TO_BYTE( x )	//idMath::Ftob( 128.0f + 127.0f * (x) + 0.5f )

/*
================================================
halfFloat_t
================================================
*/
typedef unsigned short halfFloat_t;

// GPU half-float bit patterns
#define HF_MANTISSA(x)	(x&1023)
#define HF_EXP(x)		((x&32767)>>10)
#define HF_SIGN(x)		((x&32768)?-1:1)

/*
========================
F16toF32
========================
*/
ID_INLINE float F16toF32( halfFloat_t x ) {
	int e = HF_EXP( x );
	int m = HF_MANTISSA( x );
	int s = HF_SIGN( x );

	if ( 0 < e && e < 31 ) {
		return s * powf( 2.0f, ( e - 15.0f ) ) * ( 1 + m / 1024.0f );
	} else if ( m == 0 ) {
        return s * 0.0f;
	}
    return s * powf( 2.0f, -14.0f ) * ( m / 1024.0f );
}

/*
========================
F32toF16
========================
*/
ID_INLINE halfFloat_t F32toF16( float a ) {
	unsigned int f = *(unsigned *)( &a );
	unsigned int signbit  = ( f & 0x80000000 ) >> 16;
	int exponent = ( ( f & 0x7F800000 ) >> 23 ) - 112;
	unsigned int mantissa = ( f & 0x007FFFFF );

	if ( exponent <= 0 ) {
		return 0;
	}
	if ( exponent > 30 ) {
		return (halfFloat_t)( signbit | 0x7BFF );
	}

	return (halfFloat_t)( signbit | ( exponent << 10 ) | ( mantissa >> 13 ) );
}

/*
===============================================================================

	Draw Vertex.

===============================================================================
*/

class idDrawVert {
public:
	idVec3				xyz;			// 12 bytes
	halfFloat_t			st[2];			// 4 bytes
	byte				normal[4];		// 4 bytes
	byte				tangent[4];		// 4 bytes -- [3] is texture polarity sign
	byte				color[4];		// 4 bytes
	byte				color2[4];		// 4 bytes -- weights for skinning

	float				operator[]( const int index ) const;
	float &				operator[]( const int index );

	void				Clear();

	const idVec3		GetNormal() const;
	const idVec3		GetNormalRaw() const;		// not re-normalized for renderbump

	// must be normalized already!
	void				SetNormal( float x, float y, float z );
	void				SetNormal( const idVec3 & n );

	const idVec3		GetTangent() const;
	const idVec3		GetTangentRaw() const;		// not re-normalized for renderbump

	// must be normalized already!
	void				SetTangent( float x, float y, float z );
	void				SetTangent( const idVec3 & t );

	// derived from normal, tangent, and tangent flag
	const idVec3 		GetBiTangent() const;
	const idVec3 		GetBiTangentRaw() const;	// not re-normalized for renderbump

	void				SetBiTangent( float x, float y, float z );
	ID_INLINE void		SetBiTangent( const idVec3 & t );

	float				GetBiTangentSign() const;
	byte				GetBiTangentSignBit() const;

	void				SetTexCoordNative( const halfFloat_t s, const halfFloat_t t );
	void				SetTexCoord( const idVec2 & st );
	void				SetTexCoord( float s, float t );
	void				SetTexCoordS( float s );
	void				SetTexCoordT( float t );
	const idVec2		GetTexCoord() const;
	const halfFloat_t	GetTexCoordNativeS() const;
	const halfFloat_t	GetTexCoordNativeT() const;

	// either 1.0f or -1.0f
	ID_INLINE void		SetBiTangentSign( float sign );
	ID_INLINE void		SetBiTangentSignBit( byte bit );

	void				Lerp( const idDrawVert &a, const idDrawVert &b, const float f );
	void				LerpAll( const idDrawVert &a, const idDrawVert &b, const float f );

	void				SetColor( dword color );
	void				SetNativeOrderColor( dword color );
	dword				GetColor() const;

	void				SetColor2( dword color );
	void				SetNativeOrderColor2( dword color );
	void				ClearColor2();
	dword				GetColor2() const;

	static idDrawVert	GetSkinnedDrawVert( const idDrawVert & vert, const idJointMat * joints );
	static idVec3		GetSkinnedDrawVertPosition( const idDrawVert & vert, const idJointMat * joints );
};

#define DRAWVERT_SIZE				32
#define DRAWVERT_XYZ_OFFSET			(0*4)
#define DRAWVERT_ST_OFFSET			(3*4)
#define DRAWVERT_NORMAL_OFFSET		(4*4)
#define DRAWVERT_TANGENT_OFFSET		(5*4)
#define DRAWVERT_COLOR_OFFSET		(6*4)
#define DRAWVERT_COLOR2_OFFSET		(7*4)

assert_offsetof( idDrawVert, xyz,		DRAWVERT_XYZ_OFFSET );
assert_offsetof( idDrawVert, normal,	DRAWVERT_NORMAL_OFFSET );
assert_offsetof( idDrawVert, tangent,	DRAWVERT_TANGENT_OFFSET );

/*
========================
VertexFloatToByte

Assumes input is in the range [-1, 1]
========================
*/
ID_INLINE void VertexFloatToByte( const float & x, const float & y, const float & z, byte * bval ) {
	assert_4_byte_aligned( bval );	// for __stvebx


	const __m128 vector_float_one			= { 1.0f, 1.0f, 1.0f, 1.0f };
	const __m128 vector_float_half			= { 0.5f, 0.5f, 0.5f, 0.5f };
	const __m128 vector_float_255_over_2	= { 255.0f / 2.0f, 255.0f / 2.0f, 255.0f / 2.0f, 255.0f / 2.0f };

	const __m128 xyz = _mm_unpacklo_ps( _mm_unpacklo_ps( _mm_load_ss( &x ), _mm_load_ss( &z ) ), _mm_load_ss( &y ) );
	const __m128 xyzScaled = _mm_madd_ps( _mm_add_ps( xyz, vector_float_one ), vector_float_255_over_2, vector_float_half );
	const __m128i xyzInt = _mm_cvtps_epi32( xyzScaled );
	const __m128i xyzShort = _mm_packs_epi32( xyzInt, xyzInt );
	const __m128i xyzChar = _mm_packus_epi16( xyzShort, xyzShort );
	const __m128i xyz16 = _mm_unpacklo_epi8( xyzChar, _mm_setzero_si128() );

	bval[0] = (byte)_mm_extract_epi16( xyz16, 0 );	// cannot use _mm_extract_epi8 because it is an SSE4 instruction
	bval[1] = (byte)_mm_extract_epi16( xyz16, 1 );
	bval[2] = (byte)_mm_extract_epi16( xyz16, 2 );

}

/*
========================
idDrawVert::operator[]
========================
*/
ID_INLINE float idDrawVert::operator[]( const int index ) const {
	assert( index >= 0 && index < 5 );
	return ((float *)(&xyz))[index];
}

/*
========================
idDrawVert::operator[]
========================
*/
ID_INLINE float	&idDrawVert::operator[]( const int index ) {
	assert( index >= 0 && index < 5 );
	return ((float *)(&xyz))[index];
}

/*
========================
idDrawVert::Clear
========================
*/
ID_INLINE void idDrawVert::Clear() {
	*reinterpret_cast<dword *>(&this->xyz.x) = 0;
	*reinterpret_cast<dword *>(&this->xyz.y) = 0;
	*reinterpret_cast<dword *>(&this->xyz.z) = 0;
	*reinterpret_cast<dword *>(this->st) = 0;
	*reinterpret_cast<dword *>(this->normal) = 0x00FF8080;	// x=0, y=0, z=1
	*reinterpret_cast<dword *>(this->tangent) = 0xFF8080FF;	// x=1, y=0, z=0
	*reinterpret_cast<dword *>(this->color) = 0;
	*reinterpret_cast<dword *>(this->color2) = 0;
}

/*
========================
idDrawVert::GetNormal
========================
*/
ID_INLINE const idVec3 idDrawVert::GetNormal() const {
	idVec3 n(	VERTEX_BYTE_TO_FLOAT( normal[0] ),
				VERTEX_BYTE_TO_FLOAT( normal[1] ),
				VERTEX_BYTE_TO_FLOAT( normal[2] ) );
	n.Normalize();	// after the normal has been compressed & uncompressed, it may not be normalized anymore
	return n;
}

/*
========================
idDrawVert::GetNormalRaw
========================
*/
ID_INLINE const idVec3 idDrawVert::GetNormalRaw() const {
	idVec3 n(	VERTEX_BYTE_TO_FLOAT( normal[0] ),
				VERTEX_BYTE_TO_FLOAT( normal[1] ),
				VERTEX_BYTE_TO_FLOAT( normal[2] ) );
	// don't re-normalize just like we do in the vertex programs
	return n;
}

/*
========================
idDrawVert::SetNormal
must be normalized already!
========================
*/
ID_INLINE void idDrawVert::SetNormal( const idVec3 & n ) {
	VertexFloatToByte( n.x, n.y, n.z, normal );
}

/*
========================
idDrawVert::SetNormal
========================
*/
ID_INLINE void idDrawVert::SetNormal( float x, float y, float z ) {
	VertexFloatToByte( x, y, z, normal );
}

/*
========================
&idDrawVert::GetTangent
========================
*/
ID_INLINE const idVec3 idDrawVert::GetTangent() const {
	idVec3 t(	VERTEX_BYTE_TO_FLOAT( tangent[0] ),
				VERTEX_BYTE_TO_FLOAT( tangent[1] ),
				VERTEX_BYTE_TO_FLOAT( tangent[2] ) );
	t.Normalize();
	return t;
}

/*
========================
&idDrawVert::GetTangentRaw
========================
*/
ID_INLINE const idVec3 idDrawVert::GetTangentRaw() const {
	idVec3 t(	VERTEX_BYTE_TO_FLOAT( tangent[0] ),
				VERTEX_BYTE_TO_FLOAT( tangent[1] ),
				VERTEX_BYTE_TO_FLOAT( tangent[2] ) );
	// don't re-normalize just like we do in the vertex programs
	return t;
}

/*
========================
idDrawVert::SetTangent
========================
*/
ID_INLINE void idDrawVert::SetTangent( float x, float y, float z ) {
	VertexFloatToByte( x, y, z, tangent );
}

/*
========================
idDrawVert::SetTangent
========================
*/
ID_INLINE void idDrawVert::SetTangent( const idVec3 & t ) {
	VertexFloatToByte( t.x, t.y, t.z, tangent );
}

/*
========================
idDrawVert::GetBiTangent
========================
*/
ID_INLINE const idVec3 idDrawVert::GetBiTangent() const {
	// derive from the normal, tangent, and bitangent direction flag
	idVec3 bitangent;
	bitangent.Cross( GetNormal(), GetTangent() );
	bitangent *= GetBiTangentSign();
	return bitangent;
}

/*
========================
idDrawVert::GetBiTangentRaw
========================
*/
ID_INLINE const idVec3 idDrawVert::GetBiTangentRaw() const {
	// derive from the normal, tangent, and bitangent direction flag
	// don't re-normalize just like we do in the vertex programs
	idVec3 bitangent;
	bitangent.Cross( GetNormalRaw(), GetTangentRaw() );
	bitangent *= GetBiTangentSign();
	return bitangent;
}

/*
========================
idDrawVert::SetBiTangent
========================
*/
ID_INLINE void idDrawVert::SetBiTangent( float x, float y, float z ) {
	SetBiTangent( idVec3( x, y, z ) );
}

/*
========================
idDrawVert::SetBiTangent
========================
*/
ID_INLINE void idDrawVert::SetBiTangent( const idVec3 &t ) {
	idVec3 bitangent;
	bitangent.Cross( GetNormal(), GetTangent() );
	SetBiTangentSign( bitangent * t );
}

/*
========================
idDrawVert::GetBiTangentSign
========================
*/
ID_INLINE float idDrawVert::GetBiTangentSign() const {
	return ( tangent[3] < 128 ) ? -1.0f : 1.0f;
}

/*
========================
idDrawVert::GetBiTangentSignBit
========================
*/
ID_INLINE byte idDrawVert::GetBiTangentSignBit() const {
	return ( tangent[3] < 128 ) ? 1 : 0;
}

/*
========================
idDrawVert::SetBiTangentSign
========================
*/
ID_INLINE void idDrawVert::SetBiTangentSign( float sign ) {
	tangent[3] = ( sign < 0.0f ) ? 0 : 255;
}

/*
========================
idDrawVert::SetBiTangentSignBit
========================
*/
ID_INLINE void idDrawVert::SetBiTangentSignBit( byte sign ) {
	tangent[3] = sign ? 0 : 255;
}

/*
========================
idDrawVert::Lerp
========================
*/
ID_INLINE void idDrawVert::Lerp( const idDrawVert &a, const idDrawVert &b, const float f ) {
	xyz = a.xyz + f * ( b.xyz - a.xyz );
	SetTexCoord( ::Lerp( a.GetTexCoord(), b.GetTexCoord(), f ) );
}

/*
========================
idDrawVert::LerpAll
========================
*/
ID_INLINE void idDrawVert::LerpAll( const idDrawVert &a, const idDrawVert &b, const float f ) {
	xyz = ::Lerp( a.xyz, b.xyz, f );
	SetTexCoord( ::Lerp( a.GetTexCoord(), b.GetTexCoord(), f ) );

	idVec3 normal = ::Lerp( a.GetNormal(), b.GetNormal(), f );
	idVec3 tangent = ::Lerp( a.GetTangent(), b.GetTangent(), f );
	idVec3 bitangent = ::Lerp( a.GetBiTangent(), b.GetBiTangent(), f );
	normal.Normalize();
	tangent.Normalize();
	bitangent.Normalize();
	SetNormal( normal );
	SetTangent( tangent );
	SetBiTangent( bitangent );

	color[0] = (byte)( a.color[0] + f * ( b.color[0] - a.color[0] ) );
	color[1] = (byte)( a.color[1] + f * ( b.color[1] - a.color[1] ) );
	color[2] = (byte)( a.color[2] + f * ( b.color[2] - a.color[2] ) );
	color[3] = (byte)( a.color[3] + f * ( b.color[3] - a.color[3] ) );

	color2[0] = (byte)( a.color2[0] + f * ( b.color2[0] - a.color2[0] ) );
	color2[1] = (byte)( a.color2[1] + f * ( b.color2[1] - a.color2[1] ) );
	color2[2] = (byte)( a.color2[2] + f * ( b.color2[2] - a.color2[2] ) );
	color2[3] = (byte)( a.color2[3] + f * ( b.color2[3] - a.color2[3] ) );
}

/*
========================
idDrawVert::SetNativeOrderColor
========================
*/
ID_INLINE void idDrawVert::SetNativeOrderColor( dword color ) {
	*reinterpret_cast<dword *>(this->color) = color;
}

/*
========================
idDrawVert::SetColor
========================
*/
ID_INLINE void idDrawVert::SetColor( dword color ) {
	*reinterpret_cast<dword *>(this->color) = color;
}

/*
========================
idDrawVert::SetColor
========================
*/
ID_INLINE dword idDrawVert::GetColor() const {
	return *reinterpret_cast<const dword *>(this->color);
}

/*
========================
idDrawVert::SetTexCoordNative
========================
*/
ID_INLINE void idDrawVert::SetTexCoordNative( const halfFloat_t s, const halfFloat_t t ) {
	st[0] = s;
	st[1] = t;
}

/*
========================
idDrawVert::SetTexCoord
========================
*/
ID_INLINE void idDrawVert::SetTexCoord( const idVec2 & st ) {
	SetTexCoordS( st.x );
	SetTexCoordT( st.y );
}

/*
========================
idDrawVert::SetTexCoord
========================
*/
ID_INLINE void idDrawVert::SetTexCoord( float s, float t ) {
	SetTexCoordS( s );
	SetTexCoordT( t );
}

/*
========================
idDrawVert::SetTexCoordS
========================
*/
ID_INLINE void idDrawVert::SetTexCoordS( float s ) {
	st[0] = F32toF16( s );
}

/*
========================
idDrawVert::SetTexCoordT
========================
*/
ID_INLINE void idDrawVert::SetTexCoordT( float t ) {
	st[1] = F32toF16( t );
}

/*
========================
idDrawVert::GetTexCoord
========================
*/
ID_INLINE const idVec2	idDrawVert::GetTexCoord() const {
	return idVec2( F16toF32( st[0] ), F16toF32( st[1] ) );
}

/*
========================
idDrawVert::GetTexCoordNativeS
========================
*/
ID_INLINE const halfFloat_t idDrawVert::GetTexCoordNativeS() const {
	return st[0];
}

/*
========================
idDrawVert::GetTexCoordNativeT
========================
*/
ID_INLINE const halfFloat_t idDrawVert::GetTexCoordNativeT() const {
	return st[1];
}

/*
========================
idDrawVert::SetNativeOrderColor2
========================
*/
ID_INLINE void idDrawVert::SetNativeOrderColor2( dword color2 ) {
	*reinterpret_cast<dword *>(this->color2) = color2;
}

/*
========================
idDrawVert::SetColor
========================
*/
ID_INLINE void idDrawVert::SetColor2( dword color2 ) {
	*reinterpret_cast<dword *>(this->color2) = color2;
}

/*
========================
idDrawVert::ClearColor2
========================
*/
ID_INLINE void idDrawVert::ClearColor2() {
	*reinterpret_cast<dword *>(this->color2) = 0x80808080;
}

/*
========================
idDrawVert::GetColor2
========================
*/
ID_INLINE dword idDrawVert::GetColor2() const {
	return *reinterpret_cast<const dword *>(this->color2);
}

/*
========================
WriteDrawVerts16

Use 16-byte in-order SIMD writes because the destVerts may live in write-combined memory
========================
*/
ID_INLINE void WriteDrawVerts16( idDrawVert * destVerts, const idDrawVert * localVerts, int numVerts ) {
	assert_sizeof( idDrawVert, 32 );
	assert_16_byte_aligned( destVerts );
	assert_16_byte_aligned( localVerts );


	for ( int i = 0; i < numVerts; i++ ) {
		__m128i v0 = _mm_load_si128( (const __m128i *)( (byte *)( localVerts + i ) +  0 ) );
		__m128i v1 = _mm_load_si128( (const __m128i *)( (byte *)( localVerts + i ) + 16 ) );
		_mm_stream_si128( (__m128i *)( (byte *)( destVerts + i ) +  0 ), v0 );
		_mm_stream_si128( (__m128i *)( (byte *)( destVerts + i ) + 16 ), v1 );
	}

}

/*
=====================
idDrawVert::GetSkinnedDrawVert
=====================
*/
ID_INLINE idDrawVert idDrawVert::GetSkinnedDrawVert( const idDrawVert & vert, const idJointMat * joints ) {
	if ( joints == NULL ) {
		return vert;
	}

	const idJointMat & j0 = joints[vert.color[0]];
	const idJointMat & j1 = joints[vert.color[1]];
	const idJointMat & j2 = joints[vert.color[2]];
	const idJointMat & j3 = joints[vert.color[3]];

	const float w0 = vert.color2[0] * ( 1.0f / 255.0f );
	const float w1 = vert.color2[1] * ( 1.0f / 255.0f );
	const float w2 = vert.color2[2] * ( 1.0f / 255.0f );
	const float w3 = vert.color2[3] * ( 1.0f / 255.0f );

	idJointMat accum;
	idJointMat::Mul( accum, j0, w0 );
	idJointMat::Mad( accum, j1, w1 );
	idJointMat::Mad( accum, j2, w2 );
	idJointMat::Mad( accum, j3, w3 );

	idDrawVert outVert;
	outVert.xyz = accum * idVec4( vert.xyz.x, vert.xyz.y, vert.xyz.z, 1.0f );
	outVert.SetTexCoordNative( vert.GetTexCoordNativeS(), vert.GetTexCoordNativeT() );
	outVert.SetNormal( accum * vert.GetNormal() );
	outVert.SetTangent( accum * vert.GetTangent() );
	outVert.tangent[3] = vert.tangent[3];
	for ( int i = 0; i < 4; i++ ) {
		outVert.color[i] = vert.color[i];
		outVert.color2[i] = vert.color2[i];
	}
	return outVert;
}

/*
=====================
idDrawVert::GetSkinnedDrawVertPosition
=====================
*/
ID_INLINE idVec3 idDrawVert::GetSkinnedDrawVertPosition( const idDrawVert & vert, const idJointMat * joints ) {
	if ( joints == NULL ) {
		return vert.xyz;
	}

	const idJointMat & j0 = joints[vert.color[0]];
	const idJointMat & j1 = joints[vert.color[1]];
	const idJointMat & j2 = joints[vert.color[2]];
	const idJointMat & j3 = joints[vert.color[3]];

	const float w0 = vert.color2[0] * ( 1.0f / 255.0f );
	const float w1 = vert.color2[1] * ( 1.0f / 255.0f );
	const float w2 = vert.color2[2] * ( 1.0f / 255.0f );
	const float w3 = vert.color2[3] * ( 1.0f / 255.0f );

	idJointMat accum;
	idJointMat::Mul( accum, j0, w0 );
	idJointMat::Mad( accum, j1, w1 );
	idJointMat::Mad( accum, j2, w2 );
	idJointMat::Mad( accum, j3, w3 );

	return accum * idVec4( vert.xyz.x, vert.xyz.y, vert.xyz.z, 1.0f );
}

/*
===============================================================================
Shadow Vertex
===============================================================================
*/
class idShadowVert {
public:
	idVec4			xyzw;

	void			Clear();
	static int		CreateShadowCache( idShadowVert * vertexCache, const idDrawVert *verts, const int numVerts );
};

#define SHADOWVERT_XYZW_OFFSET		(0)

assert_offsetof( idShadowVert, xyzw, SHADOWVERT_XYZW_OFFSET );

ID_INLINE void idShadowVert::Clear() {
	xyzw.Zero();
}

/*
===============================================================================
Skinned Shadow Vertex
===============================================================================
*/
class idShadowVertSkinned {
public:
	idVec4			xyzw;
	byte			color[4];
	byte			color2[4];
	byte			pad[8];		// pad to multiple of 32-byte for glDrawElementsBaseVertex

	void			Clear();
	static int		CreateShadowCache( idShadowVertSkinned * vertexCache, const idDrawVert *verts, const int numVerts );
};

#define SHADOWVERTSKINNED_XYZW_OFFSET		(0)
#define SHADOWVERTSKINNED_COLOR_OFFSET		(16)
#define SHADOWVERTSKINNED_COLOR2_OFFSET		(20)

assert_offsetof( idShadowVertSkinned, xyzw, SHADOWVERTSKINNED_XYZW_OFFSET );
assert_offsetof( idShadowVertSkinned, color, SHADOWVERTSKINNED_COLOR_OFFSET );
assert_offsetof( idShadowVertSkinned, color2, SHADOWVERTSKINNED_COLOR2_OFFSET );

ID_INLINE void idShadowVertSkinned::Clear() {
	xyzw.Zero();
}

#endif /* !__DRAWVERT_H__ */