/*
===========================================================================

Doom 3 BFG Edition GPL Source Code
Copyright (C) 1993-2012 id Software LLC, a ZeniMax Media company.

This file is part of the Doom 3 BFG Edition GPL Source Code ("Doom 3 BFG Edition Source Code").

Doom 3 BFG Edition Source Code is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

Doom 3 BFG Edition Source Code is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with Doom 3 BFG Edition Source Code.  If not, see <http://www.gnu.org/licenses/>.

In addition, the Doom 3 BFG Edition Source Code is also subject to certain additional terms. You should have received a copy of these additional terms immediately following the terms and conditions of the GNU General Public License which accompanied the Doom 3 BFG Edition Source Code.  If not, please request a copy in writing from id Software at the address below.

If you have questions concerning this license or the applicable additional terms, you may contact in writing id Software LLC, c/o ZeniMax Media Inc., Suite 120, Rockville, Maryland 20850 USA.

===========================================================================
*/

#pragma hdrstop
#include "precompiled.h"

#include "tr_local.h"
#include "Model_local.h"

#include "../idlib/geometry/DrawVert_intrinsics.h"

// decalFade	filter 5 0.1
// polygonOffset
// {
// map invertColor( textures/splat )
// blend GL_ZERO GL_ONE_MINUS_SRC
// vertexColor
// clamp
// }

/*
==================
idRenderModelDecal::idRenderModelDecal
==================
*/
idRenderModelDecal::idRenderModelDecal() :
	firstDecal( 0 ),
	nextDecal( 0 ),
	firstDeferredDecal( 0 ),
	nextDeferredDecal( 0 ),
	numDecalMaterials( 0 )
{
}

/*
==================
idRenderModelDecal::~idRenderModelDecal
==================
*/
idRenderModelDecal::~idRenderModelDecal()
{
}

/*
=================
idRenderModelDecal::CreateProjectionParms
=================
*/
bool idRenderModelDecal::CreateProjectionParms( decalProjectionParms_t& parms, const idFixedWinding& winding, const idVec3& projectionOrigin, const bool parallel, const float fadeDepth, const idMaterial* material, const int startTime )
{

	if( winding.GetNumPoints() != NUM_DECAL_BOUNDING_PLANES - 2 )
	{
		common->Printf( "idRenderModelDecal::CreateProjectionInfo: winding must have %d points\n", NUM_DECAL_BOUNDING_PLANES - 2 );
		return false;
	}
	
	assert( material != NULL );
	
	parms.projectionOrigin = projectionOrigin;
	parms.material = material;
	parms.parallel = parallel;
	parms.fadeDepth = fadeDepth;
	parms.startTime = startTime;
	parms.force = false;
	
	// get the winding plane and the depth of the projection volume
	idPlane windingPlane;
	winding.GetPlane( windingPlane );
	float depth = windingPlane.Distance( projectionOrigin );
	
	// find the bounds for the projection
	winding.GetBounds( parms.projectionBounds );
	if( parallel )
	{
		parms.projectionBounds.ExpandSelf( depth );
	}
	else
	{
		parms.projectionBounds.AddPoint( projectionOrigin );
	}
	
	// calculate the world space projection volume bounding planes, positive sides face outside the decal
	if( parallel )
	{
		for( int i = 0; i < winding.GetNumPoints(); i++ )
		{
			idVec3 edge = winding[( i + 1 ) % winding.GetNumPoints()].ToVec3() - winding[i].ToVec3();
			parms.boundingPlanes[i].Normal().Cross( windingPlane.Normal(), edge );
			parms.boundingPlanes[i].Normalize();
			parms.boundingPlanes[i].FitThroughPoint( winding[i].ToVec3() );
		}
	}
	else
	{
		for( int i = 0; i < winding.GetNumPoints(); i++ )
		{
			parms.boundingPlanes[i].FromPoints( projectionOrigin, winding[i].ToVec3(), winding[( i + 1 ) % winding.GetNumPoints()].ToVec3() );
		}
	}
	parms.boundingPlanes[NUM_DECAL_BOUNDING_PLANES - 2] = windingPlane;
	parms.boundingPlanes[NUM_DECAL_BOUNDING_PLANES - 2][3] -= depth;
	parms.boundingPlanes[NUM_DECAL_BOUNDING_PLANES - 1] = -windingPlane;
	
	// fades will be from these plane
	parms.fadePlanes[0] = windingPlane;
	parms.fadePlanes[0][3] -= fadeDepth;
	parms.fadePlanes[1] = -windingPlane;
	parms.fadePlanes[1][3] += depth - fadeDepth;
	
	// calculate the texture vectors for the winding
	float	len, texArea, inva;
	idVec3	temp;
	idVec5	d0, d1;
	
	const idVec5& a = winding[0];
	const idVec5& b = winding[1];
	const idVec5& c = winding[2];
	
	d0 = b.ToVec3() - a.ToVec3();
	d0.s = b.s - a.s;
	d0.t = b.t - a.t;
	d1 = c.ToVec3() - a.ToVec3();
	d1.s = c.s - a.s;
	d1.t = c.t - a.t;
	
	texArea = ( d0[3] * d1[4] ) - ( d0[4] * d1[3] );
	inva = 1.0f / texArea;
	
	temp[0] = ( d0[0] * d1[4] - d0[4] * d1[0] ) * inva;
	temp[1] = ( d0[1] * d1[4] - d0[4] * d1[1] ) * inva;
	temp[2] = ( d0[2] * d1[4] - d0[4] * d1[2] ) * inva;
	len = temp.Normalize();
	parms.textureAxis[0].Normal() = temp * ( 1.0f / len );
	parms.textureAxis[0][3] = winding[0].s - ( winding[0].ToVec3() * parms.textureAxis[0].Normal() );
	
	temp[0] = ( d0[3] * d1[0] - d0[0] * d1[3] ) * inva;
	temp[1] = ( d0[3] * d1[1] - d0[1] * d1[3] ) * inva;
	temp[2] = ( d0[3] * d1[2] - d0[2] * d1[3] ) * inva;
	len = temp.Normalize();
	parms.textureAxis[1].Normal() = temp * ( 1.0f / len );
	parms.textureAxis[1][3] = winding[0].t - ( winding[0].ToVec3() * parms.textureAxis[1].Normal() );
	
	return true;
}

/*
=================
idRenderModelDecal::GlobalProjectionParmsToLocal
=================
*/
void idRenderModelDecal::GlobalProjectionParmsToLocal( decalProjectionParms_t& localParms, const decalProjectionParms_t& globalParms, const idVec3& origin, const idMat3& axis )
{
	float modelMatrix[16];
	
	R_AxisToModelMatrix( axis, origin, modelMatrix );
	
	for( int j = 0; j < NUM_DECAL_BOUNDING_PLANES; j++ )
	{
		R_GlobalPlaneToLocal( modelMatrix, globalParms.boundingPlanes[j], localParms.boundingPlanes[j] );
	}
	R_GlobalPlaneToLocal( modelMatrix, globalParms.fadePlanes[0], localParms.fadePlanes[0] );
	R_GlobalPlaneToLocal( modelMatrix, globalParms.fadePlanes[1], localParms.fadePlanes[1] );
	R_GlobalPlaneToLocal( modelMatrix, globalParms.textureAxis[0], localParms.textureAxis[0] );
	R_GlobalPlaneToLocal( modelMatrix, globalParms.textureAxis[1], localParms.textureAxis[1] );
	R_GlobalPointToLocal( modelMatrix, globalParms.projectionOrigin, localParms.projectionOrigin );
	localParms.projectionBounds = globalParms.projectionBounds;
	localParms.projectionBounds.TranslateSelf( -origin );
	localParms.projectionBounds.RotateSelf( axis.Transpose() );
	localParms.material = globalParms.material;
	localParms.parallel = globalParms.parallel;
	localParms.fadeDepth = globalParms.fadeDepth;
	localParms.startTime = globalParms.startTime;
	localParms.force = globalParms.force;
}

/*
=================
idRenderModelDecal::ReUse
=================
*/
void idRenderModelDecal::ReUse()
{
	firstDecal = 0;
	nextDecal = 0;
	firstDeferredDecal = 0;
	nextDeferredDecal = 0;
	numDecalMaterials = 0;
}

/*
=================
idRenderModelDecal::CreateDecalFromWinding
=================
*/
void idRenderModelDecal::CreateDecalFromWinding( const idWinding& w, const idMaterial* decalMaterial, const idPlane fadePlanes[2], float fadeDepth, int startTime )
{
	// Often we are appending a new triangle to an existing decal, so merge with the previous decal if possible
	int decalIndex = ( nextDecal - 1 ) & ( MAX_DECALS - 1 );
	if( decalIndex >= 0
			&& decals[decalIndex].material == decalMaterial
			&& decals[decalIndex].startTime == startTime
			&& decals[decalIndex].numVerts + w.GetNumPoints() <= MAX_DECAL_VERTS
			&& decals[decalIndex].numIndexes + 3 * ( w.GetNumPoints() - 2 ) <= MAX_DECAL_INDEXES )
	{
	}
	else
	{
		decalIndex = nextDecal++ & ( MAX_DECALS - 1 );
		decals[decalIndex].material = decalMaterial;
		decals[decalIndex].startTime = startTime;
		decals[decalIndex].numVerts = 0;
		decals[decalIndex].numIndexes = 0;
		assert( w.GetNumPoints() <= MAX_DECAL_VERTS );
		if( nextDecal - firstDecal > MAX_DECALS )
		{
			firstDecal = nextDecal - MAX_DECALS;
		}
	}
	
	decal_t& decal = decals[decalIndex];
	
	const float invFadeDepth = -1.0f / fadeDepth;
	
	int firstVert = decal.numVerts;
	
	// create the vertices
	for( int i = 0; i < w.GetNumPoints(); i++ )
	{
		float depthFade = fadePlanes[0].Distance( w[i].ToVec3() ) * invFadeDepth;
		if( depthFade < 0.0f )
		{
			depthFade = fadePlanes[1].Distance( w[i].ToVec3() ) * invFadeDepth;
		}
		if( depthFade < 0.0f )
		{
			depthFade = 0.0f;
		}
		else if( depthFade > 0.99f )
		{
			depthFade = 1.0f;
		}
		decal.vertDepthFade[decal.numVerts] = 1.0f - depthFade;
		decal.verts[decal.numVerts].Clear();
		decal.verts[decal.numVerts].xyz = w[i].ToVec3();
		decal.verts[decal.numVerts].SetTexCoord( w[i].s, w[i].t );
		decal.numVerts++;
	}
	
	// create the indexes
	for( int i = 2; i < w.GetNumPoints(); i++ )
	{
		assert( decal.numIndexes + 3 <= MAX_DECAL_INDEXES );
		decal.indexes[decal.numIndexes + 0] = firstVert;
		decal.indexes[decal.numIndexes + 1] = firstVert + i - 1;
		decal.indexes[decal.numIndexes + 2] = firstVert + i;
		decal.numIndexes += 3;
	}
	
	// add degenerate triangles until the index size is a multiple of 16 bytes
	for( ; ( ( ( decal.numIndexes * sizeof( triIndex_t ) ) & 15 ) != 0 ); decal.numIndexes += 3 )
	{
		assert( decal.numIndexes + 3 <= MAX_DECAL_INDEXES );
		decal.indexes[decal.numIndexes + 0] = 0;
		decal.indexes[decal.numIndexes + 1] = 0;
		decal.indexes[decal.numIndexes + 2] = 0;
	}
}

/*
============
R_DecalPointCullStatic
============
*/
static void R_DecalPointCullStatic( byte* cullBits, const idPlane* planes, const idDrawVert* verts, const int numVerts )
{
	assert_16_byte_aligned( cullBits );
	assert_16_byte_aligned( verts );
	
#if defined(USE_INTRINSICS)
	idODSStreamedArray< idDrawVert, 16, SBT_DOUBLE, 4 > vertsODS( verts, numVerts );
	
	const __m128 vector_float_zero	= _mm_setzero_ps();
	const __m128i vector_int_mask0	= _mm_set1_epi32( 1 << 0 );
	const __m128i vector_int_mask1	= _mm_set1_epi32( 1 << 1 );
	const __m128i vector_int_mask2	= _mm_set1_epi32( 1 << 2 );
	const __m128i vector_int_mask3	= _mm_set1_epi32( 1 << 3 );
	const __m128i vector_int_mask4	= _mm_set1_epi32( 1 << 4 );
	const __m128i vector_int_mask5	= _mm_set1_epi32( 1 << 5 );
	
	const __m128 p0 = _mm_loadu_ps( planes[0].ToFloatPtr() );
	const __m128 p1 = _mm_loadu_ps( planes[1].ToFloatPtr() );
	const __m128 p2 = _mm_loadu_ps( planes[2].ToFloatPtr() );
	const __m128 p3 = _mm_loadu_ps( planes[3].ToFloatPtr() );
	const __m128 p4 = _mm_loadu_ps( planes[4].ToFloatPtr() );
	const __m128 p5 = _mm_loadu_ps( planes[5].ToFloatPtr() );
	
	const __m128 p0X = _mm_splat_ps( p0, 0 );
	const __m128 p0Y = _mm_splat_ps( p0, 1 );
	const __m128 p0Z = _mm_splat_ps( p0, 2 );
	const __m128 p0W = _mm_splat_ps( p0, 3 );
	
	const __m128 p1X = _mm_splat_ps( p1, 0 );
	const __m128 p1Y = _mm_splat_ps( p1, 1 );
	const __m128 p1Z = _mm_splat_ps( p1, 2 );
	const __m128 p1W = _mm_splat_ps( p1, 3 );
	
	const __m128 p2X = _mm_splat_ps( p2, 0 );
	const __m128 p2Y = _mm_splat_ps( p2, 1 );
	const __m128 p2Z = _mm_splat_ps( p2, 2 );
	const __m128 p2W = _mm_splat_ps( p2, 3 );
	
	const __m128 p3X = _mm_splat_ps( p3, 0 );
	const __m128 p3Y = _mm_splat_ps( p3, 1 );
	const __m128 p3Z = _mm_splat_ps( p3, 2 );
	const __m128 p3W = _mm_splat_ps( p3, 3 );
	
	const __m128 p4X = _mm_splat_ps( p4, 0 );
	const __m128 p4Y = _mm_splat_ps( p4, 1 );
	const __m128 p4Z = _mm_splat_ps( p4, 2 );
	const __m128 p4W = _mm_splat_ps( p4, 3 );
	
	const __m128 p5X = _mm_splat_ps( p5, 0 );
	const __m128 p5Y = _mm_splat_ps( p5, 1 );
	const __m128 p5Z = _mm_splat_ps( p5, 2 );
	const __m128 p5W = _mm_splat_ps( p5, 3 );
	
	for( int i = 0; i < numVerts; )
	{
	
		const int nextNumVerts = vertsODS.FetchNextBatch() - 4;
		
		for( ; i <= nextNumVerts; i += 4 )
		{
			const __m128 v0 = _mm_load_ps( vertsODS[i + 0].xyz.ToFloatPtr() );
			const __m128 v1 = _mm_load_ps( vertsODS[i + 1].xyz.ToFloatPtr() );
			const __m128 v2 = _mm_load_ps( vertsODS[i + 2].xyz.ToFloatPtr() );
			const __m128 v3 = _mm_load_ps( vertsODS[i + 3].xyz.ToFloatPtr() );
			
			const __m128 r0 = _mm_unpacklo_ps( v0, v2 );	// v0.x, v2.x, v0.z, v2.z
			const __m128 r1 = _mm_unpackhi_ps( v0, v2 );	// v0.y, v2.y, v0.w, v2.w
			const __m128 r2 = _mm_unpacklo_ps( v1, v3 );	// v1.x, v3.x, v1.z, v3.z
			const __m128 r3 = _mm_unpackhi_ps( v1, v3 );	// v1.y, v3.y, v1.w, v3.w
			
			const __m128 vX = _mm_unpacklo_ps( r0, r2 );	// v0.x, v1.x, v2.x, v3.x
			const __m128 vY = _mm_unpackhi_ps( r0, r2 );	// v0.y, v1.y, v2.y, v3.y
			const __m128 vZ = _mm_unpacklo_ps( r1, r3 );	// v0.z, v1.z, v2.z, v3.z
			
			const __m128 d0 = _mm_madd_ps( vX, p0X, _mm_madd_ps( vY, p0Y, _mm_madd_ps( vZ, p0Z, p0W ) ) );
			const __m128 d1 = _mm_madd_ps( vX, p1X, _mm_madd_ps( vY, p1Y, _mm_madd_ps( vZ, p1Z, p1W ) ) );
			const __m128 d2 = _mm_madd_ps( vX, p2X, _mm_madd_ps( vY, p2Y, _mm_madd_ps( vZ, p2Z, p2W ) ) );
			const __m128 d3 = _mm_madd_ps( vX, p3X, _mm_madd_ps( vY, p3Y, _mm_madd_ps( vZ, p3Z, p3W ) ) );
			const __m128 d4 = _mm_madd_ps( vX, p4X, _mm_madd_ps( vY, p4Y, _mm_madd_ps( vZ, p4Z, p4W ) ) );
			const __m128 d5 = _mm_madd_ps( vX, p5X, _mm_madd_ps( vY, p5Y, _mm_madd_ps( vZ, p5Z, p5W ) ) );
			
			__m128i c0 = __m128c( _mm_cmpgt_ps( d0, vector_float_zero ) );
			__m128i c1 = __m128c( _mm_cmpgt_ps( d1, vector_float_zero ) );
			__m128i c2 = __m128c( _mm_cmpgt_ps( d2, vector_float_zero ) );
			__m128i c3 = __m128c( _mm_cmpgt_ps( d3, vector_float_zero ) );
			__m128i c4 = __m128c( _mm_cmpgt_ps( d4, vector_float_zero ) );
			__m128i c5 = __m128c( _mm_cmpgt_ps( d5, vector_float_zero ) );
			
			c0 = _mm_and_si128( c0, vector_int_mask0 );
			c1 = _mm_and_si128( c1, vector_int_mask1 );
			c2 = _mm_and_si128( c2, vector_int_mask2 );
			c3 = _mm_and_si128( c3, vector_int_mask3 );
			c4 = _mm_and_si128( c4, vector_int_mask4 );
			c5 = _mm_and_si128( c5, vector_int_mask5 );
			
			c0 = _mm_or_si128( c0, c1 );
			c2 = _mm_or_si128( c2, c3 );
			c4 = _mm_or_si128( c4, c5 );
			
			c0 = _mm_or_si128( c0, c2 );
			c0 = _mm_or_si128( c0, c4 );
			
			__m128i s0 = _mm_packs_epi32( c0, c0 );
			__m128i b0 = _mm_packus_epi16( s0, s0 );
			
			*( unsigned int* )&cullBits[i] = _mm_cvtsi128_si32( b0 );
		}
	}
	
#else
	
	idODSStreamedArray< idDrawVert, 16, SBT_DOUBLE, 1 > vertsODS( verts, numVerts );
	
	for( int i = 0; i < numVerts; )
	{
	
		const int nextNumVerts = vertsODS.FetchNextBatch() - 1;
	
		for( ; i <= nextNumVerts; i++ )
		{
			const idVec3& v = vertsODS[i].xyz;
	
			const float d0 = planes[0].Distance( v );
			const float d1 = planes[1].Distance( v );
			const float d2 = planes[2].Distance( v );
			const float d3 = planes[3].Distance( v );
			const float d4 = planes[4].Distance( v );
			const float d5 = planes[5].Distance( v );
	
			byte bits;
			bits  = IEEE_FLT_SIGNBITNOTSET( d0 ) << 0;
			bits |= IEEE_FLT_SIGNBITNOTSET( d1 ) << 1;
			bits |= IEEE_FLT_SIGNBITNOTSET( d2 ) << 2;
			bits |= IEEE_FLT_SIGNBITNOTSET( d3 ) << 3;
			bits |= IEEE_FLT_SIGNBITNOTSET( d4 ) << 4;
			bits |= IEEE_FLT_SIGNBITNOTSET( d5 ) << 5;
	
			cullBits[i] = bits;
		}
	}
	
#endif
}

/*
=================
idRenderModelDecal::CreateDecal
=================
*/
void idRenderModelDecal::CreateDecal( const idRenderModel* model, const decalProjectionParms_t& localParms )
{
	int maxVerts = 0;
	for( int surfNum = 0; surfNum < model->NumSurfaces(); surfNum++ )
	{
		const modelSurface_t* surf = model->Surface( surfNum );
		if( surf->geometry != NULL && surf->shader != NULL )
		{
			maxVerts = Max( maxVerts, surf->geometry->numVerts );
		}
	}
	
	idTempArray< byte > cullBits( ALIGN( maxVerts, 4 ) );
	
	// check all model surfaces
	for( int surfNum = 0; surfNum < model->NumSurfaces(); surfNum++ )
	{
		const modelSurface_t* surf = model->Surface( surfNum );
		
		// if no geometry or no shader
		if( surf->geometry == NULL || surf->shader == NULL )
		{
			continue;
		}
		
		// decals and overlays use the same rules
		if( !localParms.force && !surf->shader->AllowOverlays() )
		{
			continue;
		}
		
		srfTriangles_t* tri = surf->geometry;
		
		// if the triangle bounds do not overlap with the projection bounds
		if( !localParms.projectionBounds.IntersectsBounds( tri->bounds ) )
		{
			continue;
		}
		
		// decals don't work on animated models
		assert( tri->staticModelWithJoints == NULL );
		
		// catagorize all points by the planes
		R_DecalPointCullStatic( cullBits.Ptr(), localParms.boundingPlanes, tri->verts, tri->numVerts );
		
		// start streaming the indexes
		idODSStreamedArray< triIndex_t, 256, SBT_QUAD, 3 > indexesODS( tri->indexes, tri->numIndexes );
		
		// find triangles inside the projection volume
		for( int i = 0; i < tri->numIndexes; )
		{
		
			const int nextNumIndexes = indexesODS.FetchNextBatch() - 3;
			
			for( ; i <= nextNumIndexes; i += 3 )
			{
				const int i0 = indexesODS[i + 0];
				const int i1 = indexesODS[i + 1];
				const int i2 = indexesODS[i + 2];
				
				// skip triangles completely off one side
				if( cullBits[i0] & cullBits[i1] & cullBits[i2] )
				{
					continue;
				}
				
				const idDrawVert* verts[3] =
				{
					&tri->verts[i0],
					&tri->verts[i1],
					&tri->verts[i2]
				};
				
				// skip back facing triangles
				const idPlane plane( verts[0]->xyz, verts[1]->xyz, verts[2]->xyz );
				if( plane.Normal() * localParms.boundingPlanes[NUM_DECAL_BOUNDING_PLANES - 2].Normal() < -0.1f )
				{
					continue;
				}
				
				// create a winding with texture coordinates for the triangle
				idFixedWinding fw;
				fw.SetNumPoints( 3 );
				if( localParms.parallel )
				{
					for( int j = 0; j < 3; j++ )
					{
						fw[j] = verts[j]->xyz;
						fw[j].s = localParms.textureAxis[0].Distance( verts[j]->xyz );
						fw[j].t = localParms.textureAxis[1].Distance( verts[j]->xyz );
					}
				}
				else
				{
					for( int j = 0; j < 3; j++ )
					{
						const idVec3 dir = verts[j]->xyz - localParms.projectionOrigin;
						float scale;
						localParms.boundingPlanes[NUM_DECAL_BOUNDING_PLANES - 1].RayIntersection( verts[j]->xyz, dir, scale );
						const idVec3 intersection = verts[j]->xyz + scale * dir;
						
						fw[j] = verts[j]->xyz;
						fw[j].s = localParms.textureAxis[0].Distance( intersection );
						fw[j].t = localParms.textureAxis[1].Distance( intersection );
					}
				}
				
				const int orBits = cullBits[i0] | cullBits[i1] | cullBits[i2];
				
				// clip the exact surface triangle to the projection volume
				for( int j = 0; j < NUM_DECAL_BOUNDING_PLANES; j++ )
				{
					if( ( orBits & ( 1 << j ) ) != 0 )
					{
						if( !fw.ClipInPlace( -localParms.boundingPlanes[j] ) )
						{
							break;
						}
					}
				}
				
				// if there is a part of the triangle between the bounding planes then clip
				// the triangle based on depth and add decals for the depth faded parts
				if( fw.GetNumPoints() != 0 )
				{
					idFixedWinding back;
					
					if( fw.Split( &back, localParms.fadePlanes[0], 0.1f ) == SIDE_CROSS )
					{
						CreateDecalFromWinding( back, localParms.material, localParms.fadePlanes, localParms.fadeDepth, localParms.startTime );
					}
					
					if( fw.Split( &back, localParms.fadePlanes[1], 0.1f ) == SIDE_CROSS )
					{
						CreateDecalFromWinding( back, localParms.material, localParms.fadePlanes, localParms.fadeDepth, localParms.startTime );
					}
					
					CreateDecalFromWinding( fw, localParms.material, localParms.fadePlanes, localParms.fadeDepth, localParms.startTime );
				}
			}
		}
	}
}

/*
=====================
idRenderModelDecal::CreateDeferredDecals
=====================
*/
void idRenderModelDecal::CreateDeferredDecals( const idRenderModel* model )
{
	for( unsigned int i = firstDeferredDecal; i < nextDeferredDecal; i++ )
	{
		decalProjectionParms_t& parms = deferredDecals[i & ( MAX_DEFERRED_DECALS - 1 )];
		if( parms.startTime > tr.viewDef->renderView.time[0] -  DEFFERED_DECAL_TIMEOUT )
		{
			CreateDecal( model, parms );
		}
	}
	firstDeferredDecal = 0;
	nextDeferredDecal = 0;
}

/*
=====================
idRenderModelDecal::AddDeferredDecal
=====================
*/
void idRenderModelDecal::AddDeferredDecal( const decalProjectionParms_t& localParms )
{
	deferredDecals[nextDeferredDecal++ & ( MAX_DEFERRED_DECALS - 1 )] = localParms;
	if( nextDeferredDecal - firstDeferredDecal > MAX_DEFERRED_DECALS )
	{
		firstDeferredDecal = nextDeferredDecal - MAX_DEFERRED_DECALS;
	}
}

/*
=====================
idRenderModelDecal::RemoveFadedDecals
=====================
*/
void idRenderModelDecal::RemoveFadedDecals( int time )
{
	for( unsigned int i = firstDecal; i < nextDecal; i++ )
	{
		decal_t& decal = decals[i & ( MAX_DECALS - 1 )];
		
		const decalInfo_t decalInfo = decal.material->GetDecalInfo();
		const int minTime = time - ( decalInfo.stayTime + decalInfo.fadeTime );
		
		if( decal.startTime <= minTime )
		{
			decal.numVerts = 0;
			decal.numIndexes = 0;
			if( i == firstDecal )
			{
				firstDecal++;
			}
		}
	}
	if( firstDecal == nextDecal )
	{
		firstDecal = 0;
		nextDecal = 0;
	}
}

/*
=====================
R_CopyDecalSurface
=====================
*/
static void R_CopyDecalSurface( idDrawVert* verts, int numVerts, triIndex_t* indexes, int numIndexes,
								const decal_t* decal, const float fadeColor[4] )
{
	assert_16_byte_aligned( &verts[numVerts] );
	assert_16_byte_aligned( &indexes[numIndexes] );
	assert_16_byte_aligned( decal->indexes );
	assert_16_byte_aligned( decal->verts );
	assert( ( ( decal->numVerts * sizeof( idDrawVert ) ) & 15 ) == 0 );
	assert( ( ( decal->numIndexes * sizeof( triIndex_t ) ) & 15 ) == 0 );
	assert_16_byte_aligned( fadeColor );
	
#if defined(USE_INTRINSICS)
	
	const __m128i vector_int_num_verts = _mm_shuffle_epi32( _mm_cvtsi32_si128( numVerts ), 0 );
	const __m128i vector_short_num_verts = _mm_packs_epi32( vector_int_num_verts, vector_int_num_verts );
	const __m128 vector_fade_color = _mm_load_ps( fadeColor );
	const __m128i vector_color_mask = _mm_set_epi32( 0, -1, 0, 0 );
	
	// copy vertices and apply depth/time based fading
	assert_offsetof( idDrawVert, color, 6 * 4 );
	for( int i = 0; i < decal->numVerts; i++ )
	{
		const idDrawVert& srcVert = decal->verts[i];
		idDrawVert& dstVert = verts[numVerts + i];
		
		__m128i v0 = _mm_load_si128( ( const __m128i* )( ( byte* )&srcVert +  0 ) );
		__m128i v1 = _mm_load_si128( ( const __m128i* )( ( byte* )&srcVert + 16 ) );
		__m128 depthFade = _mm_splat_ps( _mm_load_ss( decal->vertDepthFade + i ), 0 );
		
		__m128 timeDepthFade = _mm_mul_ps( depthFade, vector_fade_color );
		__m128i colorInt = _mm_cvtps_epi32( timeDepthFade );
		__m128i colorShort = _mm_packs_epi32( colorInt, colorInt );
		__m128i colorByte = _mm_packus_epi16( colorShort, colorShort );
		v1 = _mm_or_si128( v1, _mm_and_si128( colorByte, vector_color_mask ) );
		
		_mm_stream_si128( ( __m128i* )( ( byte* )&dstVert +  0 ), v0 );
		_mm_stream_si128( ( __m128i* )( ( byte* )&dstVert + 16 ), v1 );
	}
	
	// copy indexes
	assert( ( decal->numIndexes & 7 ) == 0 );
	assert( sizeof( triIndex_t ) == 2 );
	for( int i = 0; i < decal->numIndexes; i += 8 )
	{
		__m128i vi = _mm_load_si128( ( const __m128i* )&decal->indexes[i] );
		
		vi = _mm_add_epi16( vi, vector_short_num_verts );
		
		_mm_stream_si128( ( __m128i* )&indexes[numIndexes + i], vi );
	}
	
	_mm_sfence();
	
#else
	
	// copy vertices and apply depth/time based fading
	for( int i = 0; i < decal->numVerts; i++ )
	{
		// NOTE: bad out-of-order write-combined write, SIMD code does the right thing
		verts[numVerts + i] = decal->verts[i];
		for( int j = 0; j < 4; j++ )
		{
			verts[numVerts + i].color[j] = idMath::Ftob( fadeColor[j] * decal->vertDepthFade[i] );
		}
	}
	
	// copy indices
	assert( ( decal->numIndexes & 1 ) == 0 );
	for( int i = 0; i < decal->numIndexes; i += 2 )
	{
		assert( decal->indexes[i + 0] < decal->numVerts && decal->indexes[i + 1] < decal->numVerts );
		WriteIndexPair( &indexes[numIndexes + i], numVerts + decal->indexes[i + 0], numVerts + decal->indexes[i + 1] );
	}
	
#endif
}

/*
=====================
idRenderModelDecal::GetNumDecalDrawSurfs
=====================
*/
unsigned int idRenderModelDecal::GetNumDecalDrawSurfs()
{
	numDecalMaterials = 0;
	
	for( unsigned int i = firstDecal; i < nextDecal; i++ )
	{
		const decal_t& decal = decals[i & ( MAX_DECALS - 1 )];
		
		unsigned int j = 0;
		for( ; j < numDecalMaterials; j++ )
		{
			if( decalMaterials[j] == decal.material )
			{
				break;
			}
		}
		if( j >= numDecalMaterials )
		{
			decalMaterials[numDecalMaterials++] = decal.material;
		}
	}
	
	return numDecalMaterials;
}

/*
=====================
idRenderModelDecal::CreateDecalDrawSurf
=====================
*/
drawSurf_t* idRenderModelDecal::CreateDecalDrawSurf( const viewEntity_t* space, unsigned int index )
{
	if( index < 0 || index >= numDecalMaterials )
	{
		return NULL;
	}
	
	const idMaterial* material = decalMaterials[index];
	
	int maxVerts = 0;
	int maxIndexes = 0;
	for( unsigned int i = firstDecal; i < nextDecal; i++ )
	{
		const decal_t& decal = decals[i & ( MAX_DECALS - 1 )];
		if( decal.material == material )
		{
			maxVerts += decal.numVerts;
			maxIndexes += decal.numIndexes;
		}
	}
	
	if( maxVerts == 0 || maxIndexes == 0 )
	{
		return NULL;
	}
	
	// create a new triangle surface in frame memory so it gets automatically disposed of
	srfTriangles_t* newTri = ( srfTriangles_t* )R_ClearedFrameAlloc( sizeof( *newTri ), FRAME_ALLOC_SURFACE_TRIANGLES );
	newTri->numVerts = maxVerts;
	newTri->numIndexes = maxIndexes;
	
	newTri->ambientCache = vertexCache.AllocVertex( NULL, ALIGN( maxVerts * sizeof( idDrawVert ), VERTEX_CACHE_ALIGN ) );
	newTri->indexCache = vertexCache.AllocIndex( NULL, ALIGN( maxIndexes * sizeof( triIndex_t ), INDEX_CACHE_ALIGN ) );
	
	idDrawVert* mappedVerts = ( idDrawVert* )vertexCache.MappedVertexBuffer( newTri->ambientCache );
	triIndex_t* mappedIndexes = ( triIndex_t* )vertexCache.MappedIndexBuffer( newTri->indexCache );
	
	const decalInfo_t decalInfo = material->GetDecalInfo();
	const int maxTime = decalInfo.stayTime + decalInfo.fadeTime;
	const int time = tr.viewDef->renderView.time[0];
	
	int numVerts = 0;
	int numIndexes = 0;
	for( unsigned int i = firstDecal; i < nextDecal; i++ )
	{
		const decal_t& decal = decals[i & ( MAX_DECALS - 1 )];
		
		if( decal.numVerts == 0 )
		{
			if( i == firstDecal )
			{
				firstDecal++;
			}
			continue;
		}
		
		if( decal.material != material )
		{
			continue;
		}
		
		const int deltaTime = time - decal.startTime;
		const int fadeTime = deltaTime - decalInfo.stayTime;
		if( deltaTime > maxTime )
		{
			continue;	// already completely faded away, but not yet removed
		}
		
		const float f = ( deltaTime > decalInfo.stayTime ) ? ( ( float ) fadeTime / decalInfo.fadeTime ) : 0.0f;
		
		ALIGNTYPE16 float fadeColor[4];
		for( int j = 0; j < 4; j++ )
		{
			fadeColor[j] = 255.0f * ( decalInfo.start[j] + ( decalInfo.end[j] - decalInfo.start[j] ) * f );
		}
		
		// use SIMD optimized routine to copy the vertices and indices directly to write-combined memory
		// this also applies any depth/time based fading while copying
		R_CopyDecalSurface( mappedVerts, numVerts, mappedIndexes, numIndexes, &decal, fadeColor );
		
		numVerts += decal.numVerts;
		numIndexes += decal.numIndexes;
	}
	newTri->numVerts = numVerts;
	newTri->numIndexes = numIndexes;
	
	// create the drawsurf
	drawSurf_t* drawSurf = ( drawSurf_t* )R_FrameAlloc( sizeof( *drawSurf ), FRAME_ALLOC_DRAW_SURFACE );
	drawSurf->frontEndGeo = newTri;
	drawSurf->numIndexes = newTri->numIndexes;
	drawSurf->ambientCache = newTri->ambientCache;
	drawSurf->indexCache = newTri->indexCache;
	drawSurf->shadowCache = 0;
	drawSurf->jointCache = 0;
	drawSurf->space = space;
	drawSurf->scissorRect = space->scissorRect;
	drawSurf->extraGLState = 0;
	drawSurf->renderZFail = 0;
	
	R_SetupDrawSurfShader( drawSurf, material, &space->entityDef->parms );
	
	return drawSurf;
}

/*
====================
idRenderModelDecal::ReadFromDemoFile
====================
*/
void idRenderModelDecal::ReadFromDemoFile( idDemoFile* f )
{
	// FIXME: implement
}

/*
====================
idRenderModelDecal::WriteToDemoFile
====================
*/
void idRenderModelDecal::WriteToDemoFile( idDemoFile* f ) const
{
	// FIXME: implement
}