The HTMLLinker tool

Introduction

The GNUstep HTML linker is able to fixup links from one HTML document to other HTML ones. By link we mean the standard <a href="NSString.html#DescriptionOfNSString"> tag. By fixing up a link we mean to modify the path in the href so that it points to the actual file on disk. For example, if you the DescriptionOfNSString location is in the file NSStringOverview.html in the directory /home/nicola/Doc, when the linker fixes up the <a href="NSString.html#DescriptionOfNSString"> link, it will replace it with <a href="/home/nicola/Doc/NSStringOverview.html#DescriptionOfNSString">. Please note that when fixing up the link, the linker modifies both the path and the file name that the link points to, but not the location inside the file (the DescriptionOfNSString in the example).

Practical Usage of the linker The typical usage of the linker is with maintaining cross-references in software documentation. You need to establish some sort of convention used by all your software documentation for the link names. For example, suppose that your documentation is about C libraries. For each C function, you might decide to tag its documentation in the files with the name function$function_name. For example, the place in the doc where it documents the start_library() function would have the HTML tag

<a
    name="function$start_library">

. Having established this convention, in any HTML file in your documentation in which you want to create a link to the documentation for the start_library() function, you use the code

<a rel="dynamic"
    href="#function$start_library">

(please note that you ignore the problem of locating the actual file which contains the documentation for the start_library() function, that is precisely what the linker will do for you). Whenever you install the documentation for a new project, you first create a relocation file for the project documentation, by running

      HTMLLinker -BuildRelocationFileForDir Documentation

if for example the project documentation is in the Documentation subdirectory. This will create a Documentation/table.htmlink file, which contains a list of all names found in the project documentation, and for each of them, the file in which it's found. Then, you install the project documentation (say for example that it's installed into /opt/gnustep/Local/Documentation/MyProject), and once it's installed, you can run the linker to update all links so that they point to the actual files

      HTMLLinker /opt/gnustep/Local/Documentation/MyProject \
              -l /opt/gnustep/Local/Documentation/MyProject \
              -l /opt/gnustep/Local/Documentation/MyOtherProject

This will fixup all links in MyProject's HTML files by using the relocation files of both MyProject and MyOtherProject, so all links to anything which is documented inside those files will be generated correctly.

Usage of the tool with autogsdoc You can use the tool with documentation generated by autogsdoc to perform the linking (or to relink it). Make sure to use the option -LinksMarker gsdoc because autogsdoc marks the links to be fixed up by the linker by using rel="gsdoc".

Modes of operation The HTML linker works in two phases:

The first (called generation of the relocation table) preprocesses a given set of HTML files so that it can be the destination of links. It builds a relocation table for the given set of HTML files. This relocation table simply maps all names (as in <a name="xxx">) in the files to the file in which the name is found. The HTML files are not touched. The linker is able to merge this dynamically generated relocation table with pregenerated relocation tables loaded from files (called relocation files).
The second (called linking) links a given file to the available HTML files on disk, by using the relocation table to modify the HTML links in the file so that they point to existing files.

The HTML linker can also be run in a special mode, to generate a relocation file for later reuse. In this mode, the HTML linker will build the relocation table for all files in a directory, then save the relocation table into a table.htmlink file in that directory for later reuse. There are three kinds of files:

input files: these are HTML files which are modified as a consequence of linking; they have their links fixed up.
destination files: these are HTML files which are read to produce relocation tables.
relocation files: these files are not HTML files - they are only created and read by the linker (unless you have a tool which can manage them), and are in a specific - very simple - format. They are used to save relocation information for later reuse, so that the linker can run faster. Normally, they have a .htmlink extension.

Linker behaviour The linker keeps a main relocation table, which is empty at the beginning. When run, the linker performs the following steps:

the linker reads and parses all relocation files specified on the command line, and merges the relocation tables found there into the main relocation table.
the linker reads and parses all destination files specified on the command line, and builds a relocation table for them, merging it into the main relocation table.
if any input files are specified on the command line, the linker links the files using the relocation table.

Specifying input, destination and relocation files All command line arguments which do not begin with a hypen (-), and which are not the values of defaults (for example, not the YES in -Warn YES, because that is the value of the default -Warn), are interpreted as input files. Each destination file is specified by using a -d option, and each relocation file by using a -l option. If a directory is specified as an input (or destination) file, the linker will recurse into the directory and add to the list of input (or destination) files all files in the directory (and in the directory's subdirectories, no matter how deeply nested) which have one of the following extensions: .html, .HTML, .htm or .HTM. If a directory is specified as a relocation file, the linker will add to the list of relocation files all files in the directory which have the extension .htmlink. A typical invocation of the linker is as follows:

      HTMLLinker -BuildRelocationFileForDir Doc

Builds a relocation file for the documentation in the directory Doc. After this has been done, the directory Doc can be used as a -l argument.

      HTMLLinker test.html -l Doc

Links the file test.html using the relocation file just generated in the Doc directory. What is a link A link is an anchor tag with and href, such as <a href="dest.html#location">. The destination file of the link is the file specified in the href; dest.html in the example. The destination file is ignored by the linker; the name of the link (which is everything which follows the #) is used to perform the linking. Which links are fixed up Normally, the linker will only fixup links which have the rel attribute set to dynamic, as in the following example:

<a href="nicola.html"
    rel="dynamic">

. In this way, you can specify in your HTML document which links you want to be fixed up, and which you don't want to be. You can change the type of links to be fixed up by using the -LinksMarker options, as in -LinksMarker gsdoc, which causes the linker to fixup all links with the rel attribute set to gsdoc rather than dynamic. In certain situations you might want to force the linker to attempt to fixup all links; you can run the linker with the

-FixupAllLinks
    YES

option to cause this behaviour. As a special exception, links which obviously are not to be fixed up, such as links beginning with mailto: or news:, or links without a name, are never fixed up. How links are fixed up When the HTML linker encounters a link which needs to be fixed up (say <a href="dest.html#location">), it searches the relocation table for a destination file which contains the location name. If no such file is found, the HTML linker emits a warning, and replaces the link in the file with a link to the destination without the filename. In the example, it would simply emit

<a
    href="#location">

. If the destination file is found in the list, instead, the HTML linker replaces the link with the full path to the destination file on disk. For example, if - according to the relocation table, the file /home/nicola/Doc/dest.html contains the name location, the HTML linker will fixup the link to be <a href="/home/nicola/Doc/dest.html#location"> (as a special exception, if there is a path mapping which matches the path to the destination file, it's applied to the path in the link. See below for a detailed explanation of path mappings). It's important to notice that you must have unique link names for the linker to work properly. For example, if you have two different destination files containing the same name, say NSObject.html and NSString.html both containing the name init, then the linker can't resolve <a href="#init">, because it has no way to know if you meant the link to point to the first or the second destination file! You should choose names better so that they uniquely specify what they represent contents, for example NSObject_i_init and NSString_i_init if the first link is in the place documenting the -init method of the NSObject class and the second one the one of the NSString class. Then all links will clearly refer to one place or the other one, and no confusion will arise. If there are multiple destination files for a link, the linker will guess which one is the right one, and that might not give the desired result. How links are checked When a link is fixed up, the linker implicitly checks that the link is correct, because if the link name can't be found in the relocation tables, a warning is issued. Path mappings Path mappings are an additional feature of the HTML linker which can be used when exporting documentation to be served by a web server. If you are not putting your documentation on a web server but simply reading it from the filesystem, then you don't need the path mappings. The issue with exporting documentation to a web server is that you refer to files using paths which are not necessarily the same paths where the files are on disk. For example, suppose that you have some HTML documentation in /opt/doc/base and some other HTML documentation in /opt/doc/gui. The HTML files in the two documentation directories refer to each other. You can run the HTML linker and fixup all links, and we are happy. But now suppose that you set up a web server; the web server, for example, will serve URLs beginning with /Base (meaning as in requests from a browser of the form http://www.server.org/Base) by taking files from /opt/doc/base, and URLs beginning with Gui by taking files from /opt/doc/gui. To fixup the links in this case, you need path mappings. A path mapping specifies that a certain directory on disk is to be referred in some different way in links. In the example, you would pass

     -PathMapping '{ "/opt/doc/base"="/Base"; "/opt/doc/gui"="/Gui"; }'

to the linker. Each path mapping maps a path on disk to a virtual path. For example, it maps the path on disk /opt/doc/base to the virtual path /Base. Each time the linker fixes up a link, after finding the destination file, it checks the list of path mappings. If the path to the destination file begins with the path on disk of one of the path mappings, then that path on disk is replaced with the corresponding virtual path in the path to the destination file before the path to the destination file is written out in the link. For example, if you have the path mapping explained above, and if the linker is fixing up the link

<a
    href="hi.html#nicola">

, where the destination file is /opt/doc/base/nicola/hi.html, then the destination path matches the path mapping for /opt/doc/base, so the path mapping is applied and the link is fixed up to be <a href="/Base/nicola/hi.html#nicola"> rather than <a href="/opt/doc/base/nicola/hi.html#nicola"> as it would normally have been without the path mapping. Specifying path mappings

On the command line

Each path mapping specifies a mapping of a path on disk to a web server alias. The first way to specify the mappings is on the command line, in the form of a dictionary argument to the -PathMappings, as in

     -PathMappings '{ "/opt/doc/base"="/Base"; "/opt/doc/gui"="/Gui"; }'

where /opt/doc/base and /opt/doc/gui are the paths on disk and /Base and /Gui are the corresponding web server URL paths.

In a path mappings file

The other way to specify mappings is to write them into a file, in the format of a dictionary, as, for example, in a file containing the following lines

      { 
        "/opt/doc/base"="/Base"; 
        "/opt/doc/gui"="/Gui"; 
      }

and then tell the linker to read the path mappings from that file, by giving the filename as option to the -PathMappingsFile. For example, if the file containing the mappings is called mappings, then you need to pass

      -PathMappingsFile mappings

to the linker to have it read mappings from the file.

Command line path mappings override file path mappings

Both command line path mappings and path mappings from a file can be used at the same time; in case of conflict, command line path mappings override path mappings from the file.

Summary of all the options

Each of the options beginning with a single hypen (-) require an argument, as in

      HTMLLinker Documentation -LinksMarker gsdoc -d Documentation

which sets LinksMarker to gsdoc. The options might be anywhere on the command line. Options which do not begin with a single hypen (such as --help) do not require an argument, as in

      HTMLLinker --help

-d

Followed by a destination HTML file, or a directory containing destination HTML files.

-l

Followed by a relocation file, or a directory containing relocation files.

-FixupAllLinks

If set to NO (the default) only links containing the rel attribute set to dynamic (or whatever specified as LinksMarkers)are fixed up in the input files. If set to YES, all links are fixed up.

-LinksMarker

If set (and if FixupAllLinks is NO), only links with the rel attribute set to its value are processed. By default it is set to dynamic.

-PathMappings

If set to a dictionary, read the dictionary as path mappings. See above for more details of path mappings.

-PathMappingsFile

If set to a string, consider it to be the name of a file; read path mappings from that file. The file must contain the path mappings in the form of a dictionary. See above for more details on path mappings.

-Verbose

If set to YES prints some more messages than if set to NO (the default).

--help

Prints a quick explanation of the command line syntax and exits.

--version

Prints the version and exits.