mframe configuration files.

git-svn-id: svn+ssh://svn.gna.org/svn/gnustep/libs/base/trunk@2923 72102866-910b-0410-8b05-ffd578937521

Source/mframe/README

@@ -0,0 +1,112 @@
+
+   This directory contains files used for the 'mframe' software in gstep-base.
+
+   These files are part of the GNUstep Base Library.
+
+   This library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public
+   License as published by the Free Software Foundation; either
+   version 2 of the License, or (at your option) any later version.
+   
+   This library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+   
+   You should have received a copy of the GNU Library General Public
+   License along with this library; if not, write to the Free
+   Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+   The code in this directory was written by
+   Richard Frith-Macdonald <richard@brainstorm.co.uk>.
+   Inspiration for this software came from the original mframe.m by
+   Andrew McCallum, and the libFoundation software by Ovidiu Predescu and
+   Mircea Oancea, while the algorithms used are copied from gcc and are
+   copyright the Free Software Foundation.  Many code fragments are derived
+   from gcc by way of libFoundation.
+
+
+   These files are used by the configuration script to build a
+   machine/operating-system specific 'mframe.m' file containing macros used
+   to access stack frames.
+   The 'mframe.m' file is simply built by wrapping a system dependant file
+   between mframe.head and mframe.foot
+
+
+Advice on porting -
+
+    See unknown/generic for an example of the following macros
+
+MFRAME_STACK_STRUCT
+	This should be defined to 1 if functions return structures by value
+	using the method where the caller places a pointer on the stack.
+	Define this to 0 otherwise (eg. when the pointer to the structure is
+	passed in a register).
+
+MFRAME_SMALL_STRUCT
+	This is the size of the largest structure returned by value on
+	the stack.  Normally gcc returns structures of up to 8 bytes on
+	the stack.  If your system never returns structures on the stack,
+	set this to zero rather than 8.
+	NB. If __builtin_apply_args() always returns an argframe for
+	structure return via pointe, you should also define this to zero.
+
+MFRAME_STRUCT_BYREF
+	This should be defined to 1 if structure aprguments are passed
+	by reference, 0 otherwise.
+
+MFRAME_ARGS_SIZE
+	This must be set to the value computed by the apply_args_size()
+	function in expr.c in the gcc source.  It is the size of the
+	area of memory allocated in which to pass arguments to a function.
+	If you can't figure out how to determine this - try using a
+	value like 128 - which will probably be far larger than required
+	(and therefore somewhat inefficient) but will msot likely work.
+
+MFRAME_RESULT_SIZE
+	This must be set to the value computed by the apply_result_size()
+	function in expr.c in the gcc source.  It is the size of the area
+	of memory allocated in which to return a value from a function.
+	If you can't figure out how to determine this - try using a
+	value like 128 - which will probably be far larger than required
+	(and therefore somewhat inefficient) but will msot likely work.
+
+MFRAME_STRUCT_ADDR(ARGFRAME,TYPES)
+	If a function returns a structure by copying it into a location
+	whose address is set by the caller, this macro must return that
+	address within the argframe.
+	Otherwise the macro must return zero.
+
+MFRAME_ARGS
+	This macro should define a data type to be used for recording
+	information about the arguments list of a method.
+	See 'CUMULATIVE_ARGS' in the configuration file for your system
+	in gcc for a parallel example.
+
+MFRAME_INIT_ARGS(CUM, RTYPE)
+	This macro is used to initialise a variable (CUM) of the type
+	defined by MFRAME_ARGS.  The RTYPE value is the type encoding for the
+	method return type, it is needed so that CUM can take int account any
+	invisible first argument used for returning structures by value.
+	See 'INIT_CUMULATIVE_ARGS' in the configuration file for your system
+	in gcc for a parallel example.
+
+MFRAME_ARG_ENCODING(CUM,TYPES,STACK,DEST)
+	This macro is used to to determine the encoding of arguments.
+	Before initial entry,
+	  CUM should have been initialised using the MFRAME_INIT_ARGS() macro,
+	  TYPES should be a (const char*) variable initialised to a
+	    type-encoding string listing the arguments of a function/method,
+	  STACK should be an integer variable of value 0 in which the size of
+	    the stack arguments will be accumulated,
+	  DEST should be a (char*) variable initialised to a pointer to a
+	    buffer into which the full type encoding will be written.
+	After each use of the macro, TYPES is advanced to point to the next
+	argument, and DEST is advanced to point after the encoding of the
+	previous argument.
+	Of course, you must ensure that the buffer pointed to by DEST is
+	large enough so that it does not overflow!
+	You will be safe if your buffer is at least ten times as big as
+	the type-encoding string you start from.
+
+  

Source/mframe/config.guess

@@ -0,0 +1,743 @@
+#! /bin/sh
+# Attempt to guess a canonical system name.
+#   Copyright (C) 1992, 93, 94, 95, 96, 1997 Free Software Foundation, Inc.
+#
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Written by Per Bothner <bothner@cygnus.com>.
+# The master version of this file is at the FSF in /home/gd/gnu/lib.
+#
+# This script attempts to guess a canonical system name similar to
+# config.sub.  If it succeeds, it prints the system name on stdout, and
+# exits with 0.  Otherwise, it exits with 1.
+#
+# The plan is that this can be called by configure scripts if you
+# don't specify an explicit system type (host/target name).
+#
+# Only a few systems have been added to this list; please add others
+# (but try to keep the structure clean).
+#
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 8/24/94.)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+	PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+trap 'rm -f dummy.c dummy.o dummy; exit 1' 1 2 15
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+    alpha:OSF1:*:*)
+	# A Vn.n version is a released version.
+	# A Tn.n version is a released field test version.
+	# A Xn.n version is an unreleased experimental baselevel.
+	# 1.2 uses "1.2" for uname -r.
+	echo alpha-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//'`
+	exit 0 ;;
+    21064:Windows_NT:50:3)
+	echo alpha-dec-winnt3.5
+	exit 0 ;;
+    Amiga*:UNIX_System_V:4.0:*)
+	echo m68k-cbm-sysv4
+	exit 0;;
+    amiga:NetBSD:*:*)
+      echo m68k-cbm-netbsd${UNAME_RELEASE}
+      exit 0 ;;
+    amiga:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    arc64:OpenBSD:*:*)
+	echo mips64el-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    arc:OpenBSD:*:*)
+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    hkmips:OpenBSD:*:*)
+	echo mips-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    pmax:OpenBSD:*:*)
+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    sgi:OpenBSD:*:*)
+	echo mips-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    wgrisc:OpenBSD:*:*)
+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+	echo arm-acorn-riscix${UNAME_RELEASE}
+	exit 0;;
+    SR2?01:HI-UX/MPP:*:*)
+	echo hppa1.1-hitachi-hiuxmpp
+	exit 0;;
+    Pyramid*:OSx*:*:*|MIS*:OSx*:*:*)
+	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+	if test "`(/bin/universe) 2>/dev/null`" = att ; then
+		echo pyramid-pyramid-sysv3
+	else
+		echo pyramid-pyramid-bsd
+	fi
+	exit 0 ;;
+    NILE:*:*:dcosx)
+	echo pyramid-pyramid-svr4
+	exit 0 ;;
+    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
+    i86pc:SunOS:5.*:*)
+	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
+    sun4*:SunOS:6*:*)
+	# According to config.sub, this is the proper way to canonicalize
+	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
+	# it's likely to be more like Solaris than SunOS4.
+	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
+    sun4*:SunOS:*:*)
+	case "`/usr/bin/arch -k`" in
+	    Series*|S4*)
+		UNAME_RELEASE=`uname -v`
+		;;
+	esac
+	# Japanese Language versions have a version number like `4.1.3-JL'.
+	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+	exit 0 ;;
+    sun3*:SunOS:*:*)
+	echo m68k-sun-sunos${UNAME_RELEASE}
+	exit 0 ;;
+    aushp:SunOS:*:*)
+	echo sparc-auspex-sunos${UNAME_RELEASE}
+	exit 0 ;;
+    atari*:NetBSD:*:*)
+	echo m68k-atari-netbsd${UNAME_RELEASE}
+	exit 0 ;;
+    atari*:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    sun3*:NetBSD:*:*)
+	echo m68k-sun-netbsd${UNAME_RELEASE}
+	exit 0 ;;
+    sun3*:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mac68k:NetBSD:*:*)
+	echo m68k-apple-netbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mac68k:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mvme68k:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mvme88k:OpenBSD:*:*)
+	echo m88k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    powerpc:machten:*:*)
+	echo powerpc-apple-machten${UNAME_RELEASE}
+	exit 0 ;;
+    RISC*:Mach:*:*)
+	echo mips-dec-mach_bsd4.3
+	exit 0 ;;
+    RISC*:ULTRIX:*:*)
+	echo mips-dec-ultrix${UNAME_RELEASE}
+	exit 0 ;;
+    VAX*:ULTRIX*:*:*)
+	echo vax-dec-ultrix${UNAME_RELEASE}
+	exit 0 ;;
+    2020:CLIX:*:*)
+	echo clipper-intergraph-clix${UNAME_RELEASE}
+	exit 0 ;;
+    mips:*:*:UMIPS | mips:*:*:RISCos)
+	sed 's/^	//' << EOF >dummy.c
+	int main (argc, argv) int argc; char **argv; {
+	#if defined (host_mips) && defined (MIPSEB)
+	#if defined (SYSTYPE_SYSV)
+	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_SVR4)
+	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+	#endif
+	#endif
+	  exit (-1);
+	}
+EOF
+	${CC-cc} dummy.c -o dummy \
+	  && ./dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
+	  && rm dummy.c dummy && exit 0
+	rm -f dummy.c dummy
+	echo mips-mips-riscos${UNAME_RELEASE}
+	exit 0 ;;
+    Night_Hawk:Power_UNIX:*:*)
+	echo powerpc-harris-powerunix
+	exit 0 ;;
+    m88k:CX/UX:7*:*)
+	echo m88k-harris-cxux7
+	exit 0 ;;
+    m88k:*:4*:R4*)
+	echo m88k-motorola-sysv4
+	exit 0 ;;
+    m88k:*:3*:R3*)
+	echo m88k-motorola-sysv3
+	exit 0 ;;
+    AViiON:dgux:*:*)
+        # DG/UX returns AViiON for all architectures
+        UNAME_PROCESSOR=`/usr/bin/uname -p`
+        if [ $UNAME_PROCESSOR = mc88100 -o $UNAME_PROCESSOR = mc88110 ] ; then
+	if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx \
+	     -o ${TARGET_BINARY_INTERFACE}x = x ] ; then
+		echo m88k-dg-dgux${UNAME_RELEASE}
+	else
+		echo m88k-dg-dguxbcs${UNAME_RELEASE}
+	fi
+        else echo i586-dg-dgux${UNAME_RELEASE}
+        fi
+ 	exit 0 ;;
+    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
+	echo m88k-dolphin-sysv3
+	exit 0 ;;
+    M88*:*:R3*:*)
+	# Delta 88k system running SVR3
+	echo m88k-motorola-sysv3
+	exit 0 ;;
+    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+	echo m88k-tektronix-sysv3
+	exit 0 ;;
+    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+	echo m68k-tektronix-bsd
+	exit 0 ;;
+    *:IRIX*:*:*)
+	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+	exit 0 ;;
+    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+	echo romp-ibm-aix      # uname -m gives an 8 hex-code CPU id
+	exit 0 ;;              # Note that: echo "'`uname -s`'" gives 'AIX '
+    i?86:AIX:*:*)
+	echo i386-ibm-aix
+	exit 0 ;;
+    *:AIX:2:3)
+	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+		sed 's/^		//' << EOF >dummy.c
+		#include <sys/systemcfg.h>
+
+		main()
+			{
+			if (!__power_pc())
+				exit(1);
+			puts("powerpc-ibm-aix3.2.5");
+			exit(0);
+			}
+EOF
+		${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0
+		rm -f dummy.c dummy
+		echo rs6000-ibm-aix3.2.5
+	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+		echo rs6000-ibm-aix3.2.4
+	else
+		echo rs6000-ibm-aix3.2
+	fi
+	exit 0 ;;
+    *:AIX:*:4)
+	if /usr/sbin/lsattr -EHl proc0 | grep POWER >/dev/null 2>&1; then
+		IBM_ARCH=rs6000
+	else
+		IBM_ARCH=powerpc
+	fi
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV=4.${UNAME_RELEASE}
+	fi
+	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+	exit 0 ;;
+    *:AIX:*:*)
+	echo rs6000-ibm-aix
+	exit 0 ;;
+    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+	echo romp-ibm-bsd4.4
+	exit 0 ;;
+    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC NetBSD and
+	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
+	exit 0 ;;                           # report: romp-ibm BSD 4.3
+    *:BOSX:*:*)
+	echo rs6000-bull-bosx
+	exit 0 ;;
+    DPX/2?00:B.O.S.:*:*)
+	echo m68k-bull-sysv3
+	exit 0 ;;
+    9000/[34]??:4.3bsd:1.*:*)
+	echo m68k-hp-bsd
+	exit 0 ;;
+    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+	echo m68k-hp-bsd4.4
+	exit 0 ;;
+    9000/[3478]??:HP-UX:*:*)
+	case "${UNAME_MACHINE}" in
+	    9000/31? )            HP_ARCH=m68000 ;;
+	    9000/[34]?? )         HP_ARCH=m68k ;;
+	    9000/7?? | 9000/8?[1679] ) HP_ARCH=hppa1.1 ;;
+	    9000/8?? )            HP_ARCH=hppa1.0 ;;
+	esac
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+	exit 0 ;;
+    3050*:HI-UX:*:*)
+	sed 's/^	//' << EOF >dummy.c
+	#include <unistd.h>
+	int
+	main ()
+	{
+	  long cpu = sysconf (_SC_CPU_VERSION);
+	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
+	     results, however.  */
+	  if (CPU_IS_PA_RISC (cpu))
+	    {
+	      switch (cpu)
+		{
+		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+		  default: puts ("hppa-hitachi-hiuxwe2"); break;
+		}
+	    }
+	  else if (CPU_IS_HP_MC68K (cpu))
+	    puts ("m68k-hitachi-hiuxwe2");
+	  else puts ("unknown-hitachi-hiuxwe2");
+	  exit (0);
+	}
+EOF
+	${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0
+	rm -f dummy.c dummy
+	echo unknown-hitachi-hiuxwe2
+	exit 0 ;;
+    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+	echo hppa1.1-hp-bsd
+	exit 0 ;;
+    9000/8??:4.3bsd:*:*)
+	echo hppa1.0-hp-bsd
+	exit 0 ;;
+    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+	echo hppa1.1-hp-osf
+	exit 0 ;;
+    hp8??:OSF1:*:*)
+	echo hppa1.0-hp-osf
+	exit 0 ;;
+    i?86:OSF1:*:*)
+	if [ -x /usr/sbin/sysversion ] ; then
+	    echo ${UNAME_MACHINE}-unknown-osf1mk
+	else
+	    echo ${UNAME_MACHINE}-unknown-osf1
+	fi
+	exit 0 ;;
+    parisc*:Lites*:*:*)
+	echo hppa1.1-hp-lites
+	exit 0 ;;
+    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+	echo c1-convex-bsd
+        exit 0 ;;
+    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+        exit 0 ;;
+    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+	echo c34-convex-bsd
+        exit 0 ;;
+    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+	echo c38-convex-bsd
+        exit 0 ;;
+    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+	echo c4-convex-bsd
+        exit 0 ;;
+    CRAY*X-MP:*:*:*)
+	echo xmp-cray-unicos
+        exit 0 ;;
+    CRAY*Y-MP:*:*:*)
+	echo ymp-cray-unicos${UNAME_RELEASE}
+	exit 0 ;;
+    CRAY*[A-Z]90:*:*:*)
+	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/
+	exit 0 ;;
+    CRAY*TS:*:*:*)
+	echo t90-cray-unicos${UNAME_RELEASE}
+	exit 0 ;;
+    CRAY-2:*:*:*)
+	echo cray2-cray-unicos
+        exit 0 ;;
+    F300:UNIX_System_V:*:*)
+        FUJITSU_SYS=`uname -p | tr [A-Z] [a-z] | sed -e 's/\///'`
+        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+        echo "f300-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+        exit 0 ;;
+    F301:UNIX_System_V:*:*)
+       echo f301-fujitsu-uxpv`echo $UNAME_RELEASE | sed 's/ .*//'`
+       exit 0 ;;
+    hp3[0-9][05]:NetBSD:*:*)
+	echo m68k-hp-netbsd${UNAME_RELEASE}
+	exit 0 ;;
+    hp300:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    i?86:BSD/386:*:* | *:BSD/OS:*:*)
+	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+	exit 0 ;;
+    *:FreeBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+	exit 0 ;;
+    *:NetBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+	exit 0 ;;
+    *:OpenBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+	exit 0 ;;
+    i*:CYGWIN*:*)
+	echo i386-pc-cygwin32
+	exit 0 ;;
+    i*:MINGW*:*)
+	echo i386-pc-mingw32
+	exit 0 ;;
+    p*:CYGWIN*:*)
+	echo powerpcle-unknown-cygwin32
+	exit 0 ;;
+    prep*:SunOS:5.*:*)
+	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
+    *:GNU:*:*)
+	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+	exit 0 ;;
+    *:Linux:*:*)
+	# The BFD linker knows what the default object file format is, so
+	# first see if it will tell us.
+	ld_help_string=`ld --help 2>&1`
+	if echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: elf_i.86"; then
+	  echo "${UNAME_MACHINE}-pc-linux-gnu" ; exit 0
+	elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: i.86linux"; then
+	  echo "${UNAME_MACHINE}-pc-linux-gnuaout" ; exit 0
+	elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: i.86coff"; then
+	  echo "${UNAME_MACHINE}-pc-linux-gnucoff" ; exit 0
+	elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: m68kelf"; then
+	  echo "${UNAME_MACHINE}-unknown-linux-gnu" ; exit 0
+	elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: m68klinux"; then
+	  echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0
+	elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: elf32ppc"; then
+	  echo "powerpc-unknown-linux-gnu" ; exit 0
+	elif test "${UNAME_MACHINE}" = "alpha" ; then
+	  echo alpha-unknown-linux-gnu ; exit 0
+	elif test "${UNAME_MACHINE}" = "sparc" ; then
+	  echo sparc-unknown-linux-gnu ; exit 0
+	elif test "${UNAME_MACHINE}" = "mips" ; then
+	  cat >dummy.c <<EOF
+main(argc, argv)
+int argc;
+char *argv[];
+{
+#ifdef __MIPSEB__
+  printf ("%s-unknown-linux-gnu\n", argv[1]);
+#endif
+#ifdef __MIPSEL__
+  printf ("%sel-unknown-linux-gnu\n", argv[1]);
+#endif
+  return 0;
+}
+EOF
+	  ${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0
+	  rm -f dummy.c dummy
+	else
+	  # Either a pre-BFD a.out linker (linux-gnuoldld) or one that does not give us
+	  # useful --help.  Gcc wants to distinguish between linux-gnuoldld and linux-gnuaout.
+	  test ! -d /usr/lib/ldscripts/. \
+	    && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0
+	  # Determine whether the default compiler is a.out or elf
+	  cat >dummy.c <<EOF
+main(argc, argv)
+int argc;
+char *argv[];
+{
+#ifdef __ELF__
+  printf ("%s-pc-linux-gnu\n", argv[1]);
+#else
+  printf ("%s-pc-linux-gnuaout\n", argv[1]);
+#endif
+  return 0;
+}
+EOF
+	  ${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0
+	  rm -f dummy.c dummy
+	fi ;;
+# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.  earlier versions
+# are messed up and put the nodename in both sysname and nodename.
+    i?86:DYNIX/ptx:4*:*)
+	echo i386-sequent-sysv4
+	exit 0 ;;
+    i?86:*:4.*:* | i?86:SYSTEM_V:4.*:*)
+	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+		echo ${UNAME_MACHINE}-univel-sysv${UNAME_RELEASE}
+	else
+		echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE}
+	fi
+	exit 0 ;;
+    i?86:*:3.2:*)
+	if test -f /usr/options/cb.name; then
+		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+	elif /bin/uname -X 2>/dev/null >/dev/null ; then
+		UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
+		(/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
+		(/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
+			&& UNAME_MACHINE=i586
+		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+	else
+		echo ${UNAME_MACHINE}-pc-sysv32
+	fi
+	exit 0 ;;
+    Intel:Mach:3*:*)
+	echo i386-pc-mach3
+	exit 0 ;;
+    paragon:*:*:*)
+	echo i860-intel-osf1
+	exit 0 ;;
+    i860:*:4.*:*) # i860-SVR4
+	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+	else # Add other i860-SVR4 vendors below as they are discovered.
+	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
+	fi
+	exit 0 ;;
+    mini*:CTIX:SYS*5:*)
+	# "miniframe"
+	echo m68010-convergent-sysv
+	exit 0 ;;
+    M68*:*:R3V[567]*:*)
+	test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
+    3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0)
+	OS_REL=''
+	test -r /etc/.relid \
+	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && echo i486-ncr-sysv4.3${OS_REL} && exit 0
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	  && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
+    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+          && echo i486-ncr-sysv4 && exit 0 ;;
+    m68*:LynxOS:2.*:*)
+	echo m68k-unknown-lynxos${UNAME_RELEASE}
+	exit 0 ;;
+    mc68030:UNIX_System_V:4.*:*)
+	echo m68k-atari-sysv4
+	exit 0 ;;
+    i?86:LynxOS:2.*:*)
+	echo i386-unknown-lynxos${UNAME_RELEASE}
+	exit 0 ;;
+    TSUNAMI:LynxOS:2.*:*)
+	echo sparc-unknown-lynxos${UNAME_RELEASE}
+	exit 0 ;;
+    rs6000:LynxOS:2.*:* | PowerPC:LynxOS:2.*:*)
+	echo rs6000-unknown-lynxos${UNAME_RELEASE}
+	exit 0 ;;
+    SM[BE]S:UNIX_SV:*:*)
+	echo mips-dde-sysv${UNAME_RELEASE}
+	exit 0 ;;
+    RM*:SINIX-*:*:*)
+	echo mips-sni-sysv4
+	exit 0 ;;
+    *:SINIX-*:*:*)
+	if uname -p 2>/dev/null >/dev/null ; then
+		UNAME_MACHINE=`(uname -p) 2>/dev/null`
+		echo ${UNAME_MACHINE}-sni-sysv4
+	else
+		echo ns32k-sni-sysv
+	fi
+	exit 0 ;;
+    PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+                           # says <Richard.M.Bartel@ccMail.Census.GOV>
+        echo i586-unisys-sysv4
+        exit 0 ;;
+    *:UNIX_System_V:4*:FTX*)
+	# From Gerald Hewes <hewes@openmarket.com>.
+	# How about differentiating between stratus architectures? -djm
+	echo hppa1.1-stratus-sysv4
+	exit 0 ;;
+    *:*:*:FTX*)
+	# From seanf@swdc.stratus.com.
+	echo i860-stratus-sysv4
+	exit 0 ;;
+    mc68*:A/UX:*:*)
+	echo m68k-apple-aux${UNAME_RELEASE}
+	exit 0 ;;
+    R3000:*System_V*:*:* | R4000:UNIX_SYSV:*:*)
+	if [ -d /usr/nec ]; then
+	        echo mips-nec-sysv${UNAME_RELEASE}
+	else
+	        echo mips-unknown-sysv${UNAME_RELEASE}
+	fi
+        exit 0 ;;
+esac
+
+#echo '(No uname command or uname output not recognized.)' 1>&2
+#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+
+cat >dummy.c <<EOF
+#ifdef _SEQUENT_
+# include <sys/types.h>
+# include <sys/utsname.h>
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
+     I don't know....  */
+  printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include <sys/param.h>
+  printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+          "4"
+#else
+	  ""
+#endif
+         ); exit (0);
+#endif
+#endif
+
+#if defined (__arm) && defined (__acorn) && defined (__unix)
+  printf ("arm-acorn-riscix"); exit (0);
+#endif
+
+#if defined (hp300) && !defined (hpux)
+  printf ("m68k-hp-bsd\n"); exit (0);
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+  int version;
+  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+  printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+  exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+  printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+  printf ("ns32k-encore-mach\n"); exit (0);
+#else
+  printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+  printf ("i386-pc-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+  printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+  printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+    struct utsname un;
+
+    uname(&un);
+
+    if (strncmp(un.version, "V2", 2) == 0) {
+	printf ("i386-sequent-ptx2\n"); exit (0);
+    }
+    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+	printf ("i386-sequent-ptx1\n"); exit (0);
+    }
+    printf ("i386-sequent-ptx\n"); exit (0);
+
+#endif
+
+#if defined (vax)
+#if !defined (ultrix)
+  printf ("vax-dec-bsd\n"); exit (0);
+#else
+  printf ("vax-dec-ultrix\n"); exit (0);
+#endif
+#endif
+
+#if defined (alliant) && defined (i860)
+  printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+  exit (1);
+}
+EOF
+
+${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy && rm dummy.c dummy && exit 0
+rm -f dummy.c dummy
+
+# Apollos put the system type in the environment.
+
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
+
+# Convex versions that predate uname can use getsysinfo(1)
+
+if [ -x /usr/convex/getsysinfo ]
+then
+    case `getsysinfo -f cpu_type` in
+    c1*)
+	echo c1-convex-bsd
+	exit 0 ;;
+    c2*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+	exit 0 ;;
+    c34*)
+	echo c34-convex-bsd
+	exit 0 ;;
+    c38*)
+	echo c38-convex-bsd
+	exit 0 ;;
+    c4*)
+	echo c4-convex-bsd
+	exit 0 ;;
+    esac
+fi
+
+#echo '(Unable to guess system type)' 1>&2
+
+exit 1

Source/mframe/configure

@@ -0,0 +1,959 @@
+#! /bin/sh
+
+# Guess values for system-dependent variables and create Makefiles.
+# Generated automatically using autoconf version 2.12 
+# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+
+# Defaults:
+ac_help=
+ac_default_prefix=/usr/local
+# Any additions from configure.in:
+
+# Initialize some variables set by options.
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+build=NONE
+cache_file=./config.cache
+exec_prefix=NONE
+host=NONE
+no_create=
+nonopt=NONE
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+target=NONE
+verbose=
+x_includes=NONE
+x_libraries=NONE
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
+
+# Initialize some other variables.
+subdirs=
+MFLAGS= MAKEFLAGS=
+# Maximum number of lines to put in a shell here document.
+ac_max_here_lines=12
+
+ac_prev=
+for ac_option
+do
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval "$ac_prev=\$ac_option"
+    ac_prev=
+    continue
+  fi
+
+  case "$ac_option" in
+  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) ac_optarg= ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case "$ac_option" in
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir="$ac_optarg" ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build="$ac_optarg" ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file="$ac_optarg" ;;
+
+  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+  | --da=*)
+    datadir="$ac_optarg" ;;
+
+  -disable-* | --disable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    eval "enable_${ac_feature}=no" ;;
+
+  -enable-* | --enable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "enable_${ac_feature}='$ac_optarg'" ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix="$ac_optarg" ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he)
+    # Omit some internal or obsolete options to make the list less imposing.
+    # This message is too long to be a string in the A/UX 3.1 sh.
+    cat << EOF
+Usage: configure [options] [host]
+Options: [defaults in brackets after descriptions]
+Configuration:
+  --cache-file=FILE       cache test results in FILE
+  --help                  print this message
+  --no-create             do not create output files
+  --quiet, --silent       do not print \`checking...' messages
+  --version               print the version of autoconf that created configure
+Directory and file names:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [same as prefix]
+  --bindir=DIR            user executables in DIR [EPREFIX/bin]
+  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
+  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
+  --datadir=DIR           read-only architecture-independent data in DIR
+                          [PREFIX/share]
+  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
+                          [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
+  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
+  --includedir=DIR        C header files in DIR [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
+  --infodir=DIR           info documentation in DIR [PREFIX/info]
+  --mandir=DIR            man documentation in DIR [PREFIX/man]
+  --srcdir=DIR            find the sources in DIR [configure dir or ..]
+  --program-prefix=PREFIX prepend PREFIX to installed program names
+  --program-suffix=SUFFIX append SUFFIX to installed program names
+  --program-transform-name=PROGRAM
+                          run sed PROGRAM on installed program names
+EOF
+    cat << EOF
+Host type:
+  --build=BUILD           configure for building on BUILD [BUILD=HOST]
+  --host=HOST             configure for HOST [guessed]
+  --target=TARGET         configure for TARGET [TARGET=HOST]
+Features and packages:
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --x-includes=DIR        X include files are in DIR
+  --x-libraries=DIR       X library files are in DIR
+EOF
+    if test -n "$ac_help"; then
+      echo "--enable and --with options recognized:$ac_help"
+    fi
+    exit 0 ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host="$ac_optarg" ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir="$ac_optarg" ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir="$ac_optarg" ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir="$ac_optarg" ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir="$ac_optarg" ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst \
+  | --locals | --local | --loca | --loc | --lo)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+    localstatedir="$ac_optarg" ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir="$ac_optarg" ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir="$ac_optarg" ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix="$ac_optarg" ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix="$ac_optarg" ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix="$ac_optarg" ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name="$ac_optarg" ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir="$ac_optarg" ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir="$ac_optarg" ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site="$ac_optarg" ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir="$ac_optarg" ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir="$ac_optarg" ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target="$ac_optarg" ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers)
+    echo "configure generated by autoconf version 2.12"
+    exit 0 ;;
+
+  -with-* | --with-*)
+    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "with_${ac_package}='$ac_optarg'" ;;
+
+  -without-* | --without-*)
+    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    eval "with_${ac_package}=no" ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes="$ac_optarg" ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries="$ac_optarg" ;;
+
+  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
+    ;;
+
+  *)
+    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
+      echo "configure: warning: $ac_option: invalid host type" 1>&2
+    fi
+    if test "x$nonopt" != xNONE; then
+      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
+    fi
+    nonopt="$ac_option"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
+fi
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+# File descriptor usage:
+# 0 standard input
+# 1 file creation
+# 2 errors and warnings
+# 3 some systems may open it to /dev/tty
+# 4 used on the Kubota Titan
+# 6 checking for... messages and results
+# 5 compiler messages saved in config.log
+if test "$silent" = yes; then
+  exec 6>/dev/null
+else
+  exec 6>&1
+fi
+exec 5>./config.log
+
+echo "\
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+" 1>&5
+
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Also quote any args containing shell metacharacters.
+ac_configure_args=
+for ac_arg
+do
+  case "$ac_arg" in
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c) ;;
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
+  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
+  esac
+done
+
+# NLS nuisances.
+# Only set these to C if already set.  These must not be set unconditionally
+# because not all systems understand e.g. LANG=C (notably SCO).
+# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
+# Non-C LC_CTYPE values break the ctype check.
+if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
+if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo > confdefs.h
+
+# A filename unique to this package, relative to the directory that
+# configure is in, which we can look for to find out if srcdir is correct.
+ac_unique_file=mframe.head
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then its parent.
+  ac_prog=$0
+  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
+  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
+  srcdir=$ac_confdir
+  if test ! -r $srcdir/$ac_unique_file; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+  if test "$ac_srcdir_defaulted" = yes; then
+    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
+  else
+    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
+  fi
+fi
+srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
+
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$CONFIG_SITE"; then
+  if test "x$prefix" != xNONE; then
+    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+  else
+    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+  fi
+fi
+for ac_site_file in $CONFIG_SITE; do
+  if test -r "$ac_site_file"; then
+    echo "loading site script $ac_site_file"
+    . "$ac_site_file"
+  fi
+done
+
+if test -r "$cache_file"; then
+  echo "loading cache $cache_file"
+  . $cache_file
+else
+  echo "creating cache $cache_file"
+  > $cache_file
+fi
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+    ac_n= ac_c='
+' ac_t='	'
+  else
+    ac_n=-n ac_c= ac_t=
+  fi
+else
+  ac_n= ac_c='\c' ac_t=
+fi
+
+
+
+# configure.in for mframe software
+# Process this file with autoconf to produce a configure script.
+#
+#   Copyright (C) 1998 Free Software Foundation, Inc.
+#
+#   Written by:  Richard Frith-Macdonald <richard@brainstorm.co.uk>
+#
+#   This file is part of the GNUstep project
+#
+#   This library is free software; you can redistribute it and/or
+#   modify it under the terms of the GNU Library General Public
+#   License as published by the Free Software Foundation; either
+#   version 2 of the License, or (at your option) any later version.
+#   
+#   This library is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+#   Library General Public License for more details.
+#
+#   You should have received a copy of the GNU Library General Public
+#   License along with this library; if not, write to the Free
+#   Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+#--------------------------------------------------------------------
+# Determine the host, build, and target systems
+#--------------------------------------------------------------------
+ac_aux_dir=
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+  if test -f $ac_dir/install-sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f $ac_dir/install.sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+
+# Do some error checking and defaulting for the host and target type.
+# The inputs are:
+#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
+#
+# The rules are:
+# 1. You are not allowed to specify --host, --target, and nonopt at the
+#    same time.
+# 2. Host defaults to nonopt.
+# 3. If nonopt is not specified, then host defaults to the current host,
+#    as determined by config.guess.
+# 4. Target and build default to nonopt.
+# 5. If nonopt is not specified, then target and build default to host.
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+case $host---$target---$nonopt in
+NONE---*---* | *---NONE---* | *---*---NONE) ;;
+*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
+esac
+
+
+# Make sure we can run config.sub.
+if $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:596: checking host system type" >&5
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+  case $nonopt in
+  NONE)
+    if host_alias=`$ac_config_guess`; then :
+    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+    fi ;;
+  *) host_alias=$nonopt ;;
+  esac ;;
+esac
+
+host=`$ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
+
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:617: checking target system type" >&5
+
+target_alias=$target
+case "$target_alias" in
+NONE)
+  case $nonopt in
+  NONE) target_alias=$host_alias ;;
+  *) target_alias=$nonopt ;;
+  esac ;;
+esac
+
+target=`$ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:635: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+  case $nonopt in
+  NONE) build_alias=$host_alias ;;
+  *) build_alias=$nonopt ;;
+  esac ;;
+esac
+
+build=`$ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
+test "$host_alias" != "$target_alias" &&
+  test "$program_prefix$program_suffix$program_transform_name" = \
+    NONENONEs,x,x, &&
+  program_prefix=${target_alias}-
+
+
+
+case "$target_cpu" in
+    alpha*)		host_cpu=alpha;;
+    hppa*)		host_cpu=hppa;;
+    i[456]86*)	host_cpu=i386;;
+    sparc*)		host_cpu=sparc;;
+esac
+
+if test -d $host_cpu
+then
+    my_dir=$host_cpu
+else
+    echo '*************** Warning ****************'
+    echo The 'mframe' software has not been ported to $target_cpu.
+    echo Using information from unknown.
+    echo '****************************************'
+    my_dir=unknown
+fi
+
+if test -f $my_dir/$target_os
+then
+    my_path=$my_dir/$target_os
+else
+    echo '*************** Warning ****************'
+    echo The 'mframe' software has not been ported to $target_cpu-$target_os.
+    echo Using information from $my_dir/generic.
+    echo '****************************************'
+    my_path=$my_dir/generic
+fi
+
+rm -f ../include/mframe.h
+echo "/***************** WARNING ****************" > ../include/mframe.h
+echo "*  DO NOT EDIT THIS FILE DIRECTLY - IT IS *" >> ../include/mframe.h
+echo "*  GENERATED AUTOMATICALLY BY THE CONFIG  *" >> ../include/mframe.h
+echo "*  PROCESS IN THE 'mframe' SUBDIRECTORY.  *" >> ../include/mframe.h
+echo "****************** WARNING ***************/" >> ../include/mframe.h
+cat mframe.head $my_path mframe.foot >> ../include/mframe.h
+
+trap '' 1 2 15
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs.  It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already.  You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+  case `(ac_space=' '; set) 2>&1` in
+  *ac_space=\ *)
+    # `set' does not quote correctly, so add quotes (double-quote substitution
+    # turns \\\\ into \\, and sed turns \\ into \).
+    sed -n \
+      -e "s/'/'\\\\''/g" \
+      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+    ;;
+  *)
+    # `set' quotes correctly as required by POSIX, so do not add quotes.
+    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+    ;;
+  esac >> confcache
+if cmp -s $cache_file confcache; then
+  :
+else
+  if test -w $cache_file; then
+    echo "updating cache $cache_file"
+    cat confcache > $cache_file
+  else
+    echo "not updating unwritable cache $cache_file"
+  fi
+fi
+rm -f confcache
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Any assignment to VPATH causes Sun make to only execute
+# the first set of double-colon rules, so remove it if not needed.
+# If there is a colon in the path, we need to keep it.
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
+fi
+
+trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+cat > conftest.defs <<\EOF
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
+s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
+s%\[%\\&%g
+s%\]%\\&%g
+s%\$%$$%g
+EOF
+DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
+rm -f conftest.defs
+
+
+# Without the "./", some shells look in PATH for config.status.
+: ${CONFIG_STATUS=./config.status}
+
+echo creating $CONFIG_STATUS
+rm -f $CONFIG_STATUS
+cat > $CONFIG_STATUS <<EOF
+#! /bin/sh
+# Generated automatically by configure.
+# Run this file to recreate the current configuration.
+# This directory was configured as follows,
+# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+#
+# $0 $ac_configure_args
+#
+# Compiler output produced by configure, useful for debugging
+# configure, is in ./config.log if it exists.
+
+ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
+for ac_option
+do
+  case "\$ac_option" in
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
+    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
+  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
+    echo "$CONFIG_STATUS generated by autoconf version 2.12"
+    exit 0 ;;
+  -help | --help | --hel | --he | --h)
+    echo "\$ac_cs_usage"; exit 0 ;;
+  *) echo "\$ac_cs_usage"; exit 1 ;;
+  esac
+done
+
+ac_given_srcdir=$srcdir
+
+trap 'rm -fr `echo "" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+# Protect against being on the right side of a sed subst in config.status.
+sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
+ s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
+$ac_vpsub
+$extrasub
+s%@CFLAGS@%$CFLAGS%g
+s%@CPPFLAGS@%$CPPFLAGS%g
+s%@CXXFLAGS@%$CXXFLAGS%g
+s%@DEFS@%$DEFS%g
+s%@LDFLAGS@%$LDFLAGS%g
+s%@LIBS@%$LIBS%g
+s%@exec_prefix@%$exec_prefix%g
+s%@prefix@%$prefix%g
+s%@program_transform_name@%$program_transform_name%g
+s%@bindir@%$bindir%g
+s%@sbindir@%$sbindir%g
+s%@libexecdir@%$libexecdir%g
+s%@datadir@%$datadir%g
+s%@sysconfdir@%$sysconfdir%g
+s%@sharedstatedir@%$sharedstatedir%g
+s%@localstatedir@%$localstatedir%g
+s%@libdir@%$libdir%g
+s%@includedir@%$includedir%g
+s%@oldincludedir@%$oldincludedir%g
+s%@infodir@%$infodir%g
+s%@mandir@%$mandir%g
+s%@host@%$host%g
+s%@host_alias@%$host_alias%g
+s%@host_cpu@%$host_cpu%g
+s%@host_vendor@%$host_vendor%g
+s%@host_os@%$host_os%g
+s%@target@%$target%g
+s%@target_alias@%$target_alias%g
+s%@target_cpu@%$target_cpu%g
+s%@target_vendor@%$target_vendor%g
+s%@target_os@%$target_os%g
+s%@build@%$build%g
+s%@build_alias@%$build_alias%g
+s%@build_cpu@%$build_cpu%g
+s%@build_vendor@%$build_vendor%g
+s%@build_os@%$build_os%g
+
+CEOF
+EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+
+# Split the substitutions into bite-sized pieces for seds with
+# small command number limits, like on Digital OSF/1 and HP-UX.
+ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
+ac_file=1 # Number of current file.
+ac_beg=1 # First line for current file.
+ac_end=$ac_max_sed_cmds # Line after last line for current file.
+ac_more_lines=:
+ac_sed_cmds=""
+while $ac_more_lines; do
+  if test $ac_beg -gt 1; then
+    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
+  else
+    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
+  fi
+  if test ! -s conftest.s$ac_file; then
+    ac_more_lines=false
+    rm -f conftest.s$ac_file
+  else
+    if test -z "$ac_sed_cmds"; then
+      ac_sed_cmds="sed -f conftest.s$ac_file"
+    else
+      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
+    fi
+    ac_file=`expr $ac_file + 1`
+    ac_beg=$ac_end
+    ac_end=`expr $ac_end + $ac_max_sed_cmds`
+  fi
+done
+if test -z "$ac_sed_cmds"; then
+  ac_sed_cmds=cat
+fi
+EOF
+
+cat >> $CONFIG_STATUS <<EOF
+
+CONFIG_FILES=\${CONFIG_FILES-""}
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case "$ac_file" in
+  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+  *) ac_file_in="${ac_file}.in" ;;
+  esac
+
+  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
+
+  # Remove last slash and all that follows it.  Not all systems have dirname.
+  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+    # The file is in a subdirectory.
+    test ! -d "$ac_dir" && mkdir "$ac_dir"
+    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
+    # A "../" for each directory in $ac_dir_suffix.
+    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
+  else
+    ac_dir_suffix= ac_dots=
+  fi
+
+  case "$ac_given_srcdir" in
+  .)  srcdir=.
+      if test -z "$ac_dots"; then top_srcdir=.
+      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
+  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
+  *) # Relative path.
+    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
+    top_srcdir="$ac_dots$ac_given_srcdir" ;;
+  esac
+
+
+  echo creating "$ac_file"
+  rm -f "$ac_file"
+  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
+  case "$ac_file" in
+  *Makefile*) ac_comsub="1i\\
+# $configure_input" ;;
+  *) ac_comsub= ;;
+  esac
+
+  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+  sed -e "$ac_comsub
+s%@configure_input@%$configure_input%g
+s%@srcdir@%$srcdir%g
+s%@top_srcdir@%$top_srcdir%g
+" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
+fi; done
+rm -f conftest.s*
+
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+
+exit 0
+EOF
+chmod +x $CONFIG_STATUS
+rm -fr confdefs* $ac_clean_files
+test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
+
+

Source/mframe/configure.in

@@ -0,0 +1,77 @@
+AC_INIT(mframe.head)
+
+# configure.in for mframe software
+# Process this file with autoconf to produce a configure script.
+#
+#   Copyright (C) 1998 Free Software Foundation, Inc.
+#
+#   Written by:  Richard Frith-Macdonald <richard@brainstorm.co.uk>
+#
+#   This file is part of the GNUstep project
+#
+#   This library is free software; you can redistribute it and/or
+#   modify it under the terms of the GNU Library General Public
+#   License as published by the Free Software Foundation; either
+#   version 2 of the License, or (at your option) any later version.
+#   
+#   This library is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+#   Library General Public License for more details.
+#
+#   You should have received a copy of the GNU Library General Public
+#   License along with this library; if not, write to the Free
+#   Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+#--------------------------------------------------------------------
+# Determine the host, build, and target systems
+#--------------------------------------------------------------------
+AC_CANONICAL_SYSTEM
+
+dnl Checking CPU and Operating-System information for mframe.h
+
+case "$target_cpu" in
+    alpha*)		host_cpu=alpha;;
+    hppa*)		host_cpu=hppa;;
+    i[[456]]86*)	host_cpu=i386;;
+    sparc*)		host_cpu=sparc;;
+esac
+
+if test -d $host_cpu
+then
+    my_dir=$host_cpu
+else
+    echo '*************** Warning ****************'
+    echo The 'mframe' software has not been ported to $target_cpu.
+    echo Using information from unknown.
+    echo '****************************************'
+    my_dir=unknown
+fi
+
+if test -f $my_dir/$target_os
+then
+    my_path=$my_dir/$target_os
+else
+    echo '*************** Warning ****************'
+    echo The 'mframe' software has not been ported to $target_cpu-$target_os.
+    echo Using information from $my_dir/generic.
+    echo '****************************************'
+    my_path=$my_dir/generic
+fi
+
+rm -f ../include/mframe.h
+echo "/***************** WARNING ****************" > ../include/mframe.h
+echo "*  DO NOT EDIT THIS FILE DIRECTLY - IT IS *" >> ../include/mframe.h
+echo "*  GENERATED AUTOMATICALLY BY THE CONFIG  *" >> ../include/mframe.h
+echo "*  PROCESS IN THE 'mframe' SUBDIRECTORY.  *" >> ../include/mframe.h
+echo "****************** WARNING ***************/" >> ../include/mframe.h
+cat mframe.head $my_path mframe.foot >> ../include/mframe.h
+
+AC_OUTPUT()
+
+dnl Local Variables:
+dnl comment-start: "dnl "
+dnl comment-end: ""
+dnl comment-start-skip: "\\bdnl\\b\\s *"
+dnl compile-command: "autoconf"
+dnl End:

Source/mframe/mframe.foot

@@ -0,0 +1,70 @@
+
+inline static void*
+mframe_arg_addr(arglist_t argf, NSArgumentInfo *info)
+{
+    int	offset = info->offset;
+#if WORDS_BIGENDIAN
+    if (info->size < sizeof(int))
+	offset += sizeof(int) - info->size;
+#endif
+    if (info->isReg)
+	return(argf->arg_regs + offset);
+    else
+	return(argf->arg_ptr + offset);
+}
+
+inline static void
+mframe_get_arg(arglist_t argf, NSArgumentInfo *info, void* buffer)
+{
+#if MFRAME_STRUCT_BYREF
+    const char	*typ = info->type;
+
+    /*
+     *	If structures are passed in the stack frame by reference - we need
+     *	to copy the actual structure, rather than it's pointer.
+     */
+    if (*typ == _C_STRUCT_B || *typ == _C_UNION_B || *typ == _C_ARY_B) {
+	memcpy(buffer, *(void**)mframe_arg_addr(argf, info), info->size);
+    }
+    else
+#endif
+    memcpy(buffer, mframe_arg_addr(argf, info), info->size);
+}
+
+inline static void
+mframe_set_arg(arglist_t argf, NSArgumentInfo *info, void* buffer)
+{
+#if MFRAME_STRUCT_BYREF
+    const char	*typ = info->type;
+
+    /*
+     *	If structures are passed in the stack frame by reference - we need
+     *	to copy a pointer onto the stack rather than the actual structure.
+     */
+    if (*typ == _C_STRUCT_B || *typ == _C_UNION_B || *typ == _C_ARY_B) {
+	memcpy(mframe_arg_addr(argf, info), &buffer, sizeof(void*));
+    }
+    else
+#endif
+    memcpy(mframe_arg_addr(argf, info), buffer, info->size);
+}
+
+inline static void
+mframe_cpy_arg(arglist_t dst, arglist_t src, NSArgumentInfo *info)
+{
+#if MFRAME_STRUCT_BYREF
+    const char	*typ = info->type;
+
+    /*
+     *	If structures are passed in the stack frame by reference - we need
+     *	to copy a pointer onto the stack rather than the actual structure.
+     */
+    if (*typ == _C_STRUCT_B || *typ == _C_UNION_B || *typ == _C_ARY_B) {
+	memcpy(mframe_arg_addr(dst, info), mframe_arg_addr(src, info), sizeof(void*));
+    }
+    else
+#endif
+    memcpy(mframe_arg_addr(dst, info), mframe_arg_addr(src, info), info->size);
+}
+
+#endif /* __mframe_h_GNUSTEP_BASE_INCLUDE */

Source/mframe/mframe.head

@@ -0,0 +1,127 @@
+/* Interface for functions that dissect/make method calls 
+   Copyright (C) 1994, 1996 Free Software Foundation, Inc.
+   
+   Written by:  Andrew Kachites McCallum <mccallum@gnu.ai.mit.edu>
+   Created: Oct 1994
+   
+   This file is part of the GNUstep Base Library.
+
+   This library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public
+   License as published by the Free Software Foundation; either
+   version 2 of the License, or (at your option) any later version.
+   
+   This library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+   
+   You should have received a copy of the GNU Library General Public
+   License along with this library; if not, write to the Free
+   Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+   */ 
+
+#ifndef __mframe_h_GNUSTEP_BASE_INCLUDE
+#define __mframe_h_GNUSTEP_BASE_INCLUDE
+
+#include <gnustep/base/preface.h>
+
+/* For NSArgumentInfo we include NSMethodSignature.h */
+#include <Foundation/NSMethodSignature.h>
+
+#if NeXT_runtime
+typedef union {
+    char *arg_ptr;
+    char arg_regs[sizeof (char*)];
+} *arglist_t;
+#endif
+
+/* These functions are used to pull apart method calls, and put them
+   back together again.  They are useful for things like distributed
+   objects, and cross-language communication glue between Objective C
+   and other languages. */
+
+/* xxx Currently these function only work with the GNU Objective C
+   runtime, not the NeXT runtime. */
+
+
+/* Extract the arguments to a method call, as found in ARGFRAME,
+   according to type string TYPES, and encode them by calling ENCODER.
+   Return YES if and only if the method has some pass-by-reference
+   arguments. */
+
+BOOL
+mframe_dissect_call (arglist_t argframe, const char *types,
+		     void (*encoder)(int,void*,const char*,int));
+BOOL
+mframe_dissect_call_opts (arglist_t argframe, const char *types,
+		     void (*encoder)(int,void*,const char*,int),
+			BOOL pass_pointers);
+
+/* Decode the arguments to a method call by calling DECODER, knowing
+   what to decode by looking at type string ENCODED_TYPES.  Build an
+   argframe of type arglist_t, and invoke the method.  Then encode the
+   return value and the pass-by-reference values using ENCODER. */
+
+void
+mframe_do_call (const char *encoded_types,
+		void(*decoder)(int,void*,const char*),
+		void(*encoder)(int,void*,const char*,int));
+void
+mframe_do_call_opts (const char *encoded_types,
+		void(*decoder)(int,void*,const char*),
+		void(*encoder)(int,void*,const char*,int),
+		BOOL pass_pointers);
+
+/* Decode the return value and pass-by-reference arguments using
+   DECODER, knowning what to decode by looking at type string TYPES
+   and OUT_PARAMETERS, and put then into ARGFRAME.  Return the
+   retval_t structure that can be passed to __builtin_return(). */
+
+retval_t 
+mframe_build_return (arglist_t argframe, const char *types, 
+		     BOOL out_parameters,
+		     void(*decoder)(int,void*,const char*,int));
+retval_t 
+mframe_build_return_opts (arglist_t argframe, const char *types, 
+		     BOOL out_parameters,
+		     void(*decoder)(int,void*,const char*,int),
+		     BOOL pass_pointers);
+
+/*
+ *	Copy the return value from retframe into the specified buffer.
+ */
+BOOL
+mframe_decode_return(const char *type, void* buffer, void* retframe);
+
+/*
+ *	Return the value of the specified type in 'retval' using argFrame.
+ */
+void*
+mframe_handle_return(const char* type, void* retval, arglist_t argFrame);
+
+/*
+ *	Step through method encoding information extracting details.
+ */
+const char *
+mframe_next_arg(const char *typePtr, NSArgumentInfo *info);
+
+/*
+ *	Generate method encoding with stack/register offsets from a simple
+ *	type encoding string.  Store results in 'buf' or allocate memory
+ *	using objc_malloc() if 'buf' is a nul pointer.
+ */
+char*
+mframe_build_signature(const char *typePtr, int *size, int *narg, char *buf);
+
+
+arglist_t
+mframe_create_argframe(const char *types, void** retbuf);
+
+void
+mframe_destroy_argframe(const char *types, arglist_t argframe);
+
+#define ROUND(V, A) \
+  ({ typeof(V) __v=(V); typeof(A) __a=(A); \
+     __a*((__v+__a-1)/__a); })
+