when entering fullscreen. Fix VID_GetDesktopFullscreen() which
was incorrectly returning "true" in regular fullscreen mode.
git-svn-id: svn://svn.code.sf.net/p/quakespasm/code/trunk/quakespasm@1459 af15c1b1-3010-417e-b628-4374ebc0bcbd
Not convinced there are any issues with this, and it solves these
problems:
- change to new gamedir without execing quake.rc and exit: the
config.cfg in the new gamedir will be clobbered with the settings
from the previous gamedir.
- discrepancy between -game command line arg and "game" command.
Video mode is locked during the "exec quake.rc" to prevent the mode
from changing.
git-svn-id: svn://svn.code.sf.net/p/quakespasm/code/trunk/quakespasm@1417 af15c1b1-3010-417e-b628-4374ebc0bcbd
Refactor printing of QUAKESPASM_VERSION/QUAKESPASM_VER_PATCH to use a new
QUAKESPASM_VER_STRING macro.
git-svn-id: svn://svn.code.sf.net/p/quakespasm/code/trunk/quakespasm@1408 af15c1b1-3010-417e-b628-4374ebc0bcbd
This allows you to move the QS window to a different monitor and
then go fullscreen on that monitor. QS will still always start on
the primary monitor.
git-svn-id: svn://svn.code.sf.net/p/quakespasm/code/trunk/quakespasm@1407 af15c1b1-3010-417e-b628-4374ebc0bcbd
This is for emulating a low-resolution pixellated look,
or possibly as a performance boost on slow graphics cards.
git-svn-id: svn://svn.code.sf.net/p/quakespasm/code/trunk/quakespasm@1406 af15c1b1-3010-417e-b628-4374ebc0bcbd
The warning from gl_model.c:Mod_LoadTextures() seemed
like a real bug: Eric please check and confirm.
git-svn-id: svn://svn.code.sf.net/p/quakespasm/code/trunk/quakespasm@1301 af15c1b1-3010-417e-b628-4374ebc0bcbd
It may be a useful alternative to the existing gamma control for laptops in a bright environment, etc.
(raising contrast gives less of a gray/washed out look than raising gamma, but as a disadvantage, colours near white get clipped to white.)
It's also implemented for both GLSL and SDL gamma ramps, but only if USE_GAMMA_RAMPS is set to 1.
Since USE_GAMMA_RAMPS is 0, currently it only works with GLSL.
git-svn-id: svn://svn.code.sf.net/p/quakespasm/code/trunk/quakespasm@1290 af15c1b1-3010-417e-b628-4374ebc0bcbd
Taken from RMQEngine. the idea is to ensure every -condebug log has the gfx driver version logged.
git-svn-id: svn://svn.code.sf.net/p/quakespasm/code/trunk/quakespasm@1284 af15c1b1-3010-417e-b628-4374ebc0bcbd
(640x480 fullscreen -> windowed would give a large 1280x768 window mostly filled with garbage).
Previously, we were only using the fast path on old systems (no VBO support) anyway.
git-svn-id: svn://svn.code.sf.net/p/quakespasm/code/trunk/quakespasm@1272 af15c1b1-3010-417e-b628-4374ebc0bcbd
Fixes bug where the fog mode was resetting to the default (GL_EXP) after a mode switch, causing fog to look different. This was only affecting SDL1 for me.
git-svn-id: svn://svn.code.sf.net/p/quakespasm/code/trunk/quakespasm@1259 af15c1b1-3010-417e-b628-4374ebc0bcbd
Initially I thought that we would never need to draw an alias model that hadn't been precached when R_NewMap runs, but this assumption turned out to be incorrect. This fixes the issue where progs/bolt.mdl wasn't rendering in the Scourge Done Slick demos.
git-svn-id: svn://svn.code.sf.net/p/quakespasm/code/trunk/quakespasm@1253 af15c1b1-3010-417e-b628-4374ebc0bcbd
This matches the order used in the SDL2 sample applications included with the library.
Seems to fix an issue on Windows 10 with DPI scaling 150%, launching QS 0.90.1 with "-width 1920 -height 1080 -fullscreen", and you get a horrible black flicker every few frames.
see http://celephais.net/board/view_thread.php?id=60452&start=1587
git-svn-id: svn://svn.code.sf.net/p/quakespasm/code/trunk/quakespasm@1249 af15c1b1-3010-417e-b628-4374ebc0bcbd
Now an 8-bit stencil buffer is requested when using a 24-bit depth buffer (the default).
git-svn-id: svn://svn.code.sf.net/p/quakespasm/code/trunk/quakespasm@1209 af15c1b1-3010-417e-b628-4374ebc0bcbd
mh suggest that not doing this may cause performance
issues: http://forums.inside3d.com/viewtopic.php?t=2408
It's also mentioned in a "Depth In-Depth" document from AMD.
git-svn-id: svn://svn.code.sf.net/p/quakespasm/code/trunk/quakespasm@1203 af15c1b1-3010-417e-b628-4374ebc0bcbd
When cvar vid_desktopfullscreen is set to 1, fullscreen mode ignores vid_width/vid_height and uses the desktop resolution. SDL docs recommend using this, it's supposed to offer better OS integration.
git-svn-id: svn://svn.code.sf.net/p/quakespasm/code/trunk/quakespasm@1164 af15c1b1-3010-417e-b628-4374ebc0bcbd
Avoids general bugginess of hardware gamma, doesn't affect the whole screen in windowed mode like HW gamma. Should fix http://sourceforge.net/p/quakespasm/bugs/5/
git-svn-id: svn://svn.code.sf.net/p/quakespasm/code/trunk/quakespasm@1157 af15c1b1-3010-417e-b628-4374ebc0bcbd
In GL_MakeAliasModelDisplayLists, after saving the standerd triangle strips and fans onto the hunk, if the system is GL2 capable, we also save a second version of the mdl on the hunk designed to be loaded into a VBO (GL_MakeAliasModelDisplayLists_VBO). In R_NewMap, and on video mode changes, we call GLMesh_LoadVertexBuffers which loops over all precached mdl's and loads the data into a pair of VBO's (vertices and vertex indices).
Finally, in R_DrawAliasModel, assuming no rendering options are disabling the fast-path (r_drawflat 1, r_lightmap 1, or r_fullbright 1 would disable it), we call GL_DrawAliasFrame_GLSL, which sets up all of the bindings and draws the (possibly lerped) mdl in one glDrawElements call.
Special thanks to MH for some of the code from RMQEngine and the general concept.
git-svn-id: svn://svn.code.sf.net/p/quakespasm/code/trunk/quakespasm@1151 af15c1b1-3010-417e-b628-4374ebc0bcbd
This moves some of the OpenGL implementation to a background thread, and makes draw calls block for a shorter amount of time. AFAIK, this is the default mode on most other OS'es, not sure why you have to explicitly ask for it on OS X.
N.B. the kCGLCEMPEngine constant is available on 10.4+ so I don't bother checking the OS X version.
More info: https://developer.apple.com/library/mac/technotes/tn2085/_index.html
git-svn-id: svn://svn.code.sf.net/p/quakespasm/code/trunk/quakespasm@1137 af15c1b1-3010-417e-b628-4374ebc0bcbd
1. Remove Key_IgnoreTextInput(), and simple always send a Char_Event when
we receive TEXTINPUT (SDL2) or the unicode field of a KEYDOWN event is
filled (SDL1.).
2. Remove handling of K_KP_* in the menu/console, since they cannot be
relied on to not also send text (see issue described above). The handling
of K_KP_ENTER can stay, since we do know that it never sends text.
3. Remove the interpretation hack for the numpad, since it will no longer
be needed (and doesn't currently work for SDL2 anyway); if a numpad key
generates text we will handle it (because of "1"), if not then it will
simply be if ignored (because of "2”).
git-svn-id: svn://svn.code.sf.net/p/quakespasm/code/trunk/quakespasm@1110 af15c1b1-3010-417e-b628-4374ebc0bcbd
On my old laptop, when running "./quakespasm -fsaa 2", quakespasm would error out with a "Couldn't create window" message. Our "no FSAA available" fallback was applied at OpenGL context creation time, but according to the SDL2 wiki FSAA settings should be done before creation of the window (see https://wiki.libsdl.org/SDL_GLattr#multisample). Moved it there.
git-svn-id: svn://svn.code.sf.net/p/quakespasm/code/trunk/quakespasm@1084 af15c1b1-3010-417e-b628-4374ebc0bcbd
R_DrawTextureChains_Multitexture: revert to the way it was before VBO support was added.
gl_texmgr: expose GL_SelectTexture. make the implementation less convoluted and support 3 TMUs.
gl_vidsdl: check GL_MAX_TEXTURE_UNITS
r_brush: only create VBOs if 3 TMUs available
git-svn-id: svn://svn.code.sf.net/p/quakespasm/code/trunk/quakespasm@1035 af15c1b1-3010-417e-b628-4374ebc0bcbd
This seems to help fps a fair bit on maps with a lot of world polys like jam2_tronyn. Tried on a few computers with intel and nvidia gpus, windows, mac os, linux, and there's always at least some fps improvement. Best case was 70fps -> 96fps on jam2_tronyn, on OS X + nvidia 650gt.
Interested to hear how this works for amd gpu's, just do a timedemo with and without "-novbo".
Only downside is I had to disable the fast path in Vid_Toggle_f() because at least with SDL1, the vbo no longer works after a toggle. So as a result, fullscreen toggles with alt-enter are slightly slower.
git-svn-id: svn://svn.code.sf.net/p/quakespasm/code/trunk/quakespasm@1018 af15c1b1-3010-417e-b628-4374ebc0bcbd
It caused a dramatic slowdown on my machine on windows (50% slower)
git-svn-id: svn://svn.code.sf.net/p/quakespasm/code/trunk/quakespasm@983 af15c1b1-3010-417e-b628-4374ebc0bcbd
