From c0507cf37382606ec3e0a08152a79cf7df99762e Mon Sep 17 00:00:00 2001 From: TimeServ Date: Sun, 2 Apr 2006 03:14:06 +0000 Subject: [PATCH] remove CVSROOT git-svn-id: https://svn.code.sf.net/p/fteqw/code/trunk@2137 fc73d0e0-1445-4013-8a0c-d673dee63da5 --- CVSROOT/checkoutlist | 15 -- CVSROOT/ciabot_cvs.pl | 350 ------------------------------------------ CVSROOT/commitinfo | 15 -- CVSROOT/config | 21 --- CVSROOT/cvswrappers | 19 --- CVSROOT/editinfo | 21 --- CVSROOT/loginfo | 28 ---- CVSROOT/modules | 26 ---- CVSROOT/notify | 12 -- CVSROOT/rcsinfo | 13 -- CVSROOT/taginfo | 20 --- CVSROOT/verifymsg | 21 --- 12 files changed, 561 deletions(-) delete mode 100644 CVSROOT/checkoutlist delete mode 100644 CVSROOT/ciabot_cvs.pl delete mode 100644 CVSROOT/commitinfo delete mode 100644 CVSROOT/config delete mode 100644 CVSROOT/cvswrappers delete mode 100644 CVSROOT/editinfo delete mode 100644 CVSROOT/loginfo delete mode 100644 CVSROOT/modules delete mode 100644 CVSROOT/notify delete mode 100644 CVSROOT/rcsinfo delete mode 100644 CVSROOT/taginfo delete mode 100644 CVSROOT/verifymsg diff --git a/CVSROOT/checkoutlist b/CVSROOT/checkoutlist deleted file mode 100644 index 0a9e9cb08..000000000 --- a/CVSROOT/checkoutlist +++ /dev/null @@ -1,15 +0,0 @@ -# The "checkoutlist" file is used to support additional version controlled -# administrative files in $CVSROOT/CVSROOT, such as template files. -# -# The first entry on a line is a filename which will be checked out from -# the corresponding RCS file in the $CVSROOT/CVSROOT directory. -# The remainder of the line is an error message to use if the file cannot -# be checked out. -# -# File format: -# -# [][] -# -# comment lines begin with '#' - -ciabot_cvs.pl diff --git a/CVSROOT/ciabot_cvs.pl b/CVSROOT/ciabot_cvs.pl deleted file mode 100644 index cc9894657..000000000 --- a/CVSROOT/ciabot_cvs.pl +++ /dev/null @@ -1,350 +0,0 @@ -#!/usr/bin/perl -w -# -# ciabot -- Mail a CVS log message to a given address, for the purposes of CIA -# -# Loosely based on cvslog by Russ Allbery -# Copyright 1998 Board of Trustees, Leland Stanford Jr. University -# -# Copyright 2001, 2003, 2004 Petr Baudis -# -# This program is free software; you can redistribute it and/or modify it under -# the terms of the GNU General Public License version 2, as published by the -# Free Software Foundation. -# -# The master location of this file is -# http://pasky.or.cz/~pasky/dev/cvs/ciabot.pl. -# -# This version has been modified a bit, and is available on CIA's web site: -# http://cia.navi.cx/clients/cvs/ciabot_cvs.pl -# -# This program is designed to run from the loginfo CVS administration file. It -# takes a log message, massaging it and mailing it to the address given below. -# -# Its record in the loginfo file should look like: -# -# ALL /usr/bin/perl $CVSROOT/CVSROOT/ciabot_cvs.pl %{,,,s} $USER project from_email dest_email ignore_regexp -# -# IMPORTANT: The %{,,,s} in loginfo is new, and is required for proper operation. -# -# Make sure that you add the script to 'checkoutlist' before -# committing it. You may need to change /usr/bin/perl to point to your -# system's perl binary. -# -# Note that the last four parameters are optional, you can alternatively -# change the defaults below in the configuration section. -# - -use strict; -use vars qw ($project $from_email $dest_email $rpc_uri $sendmail $sync_delay - $xml_rpc $ignore_regexp $alt_local_message_target); - - -### Configuration - -# Project name (as known to CIA). -# -# NOTE: This shouldn't be a long description of your project. Ideally -# it is a short identifier with no spaces, punctuation, or -# unnecessary capitalization. This will be used in URLs related -# to your project, as an internal identifier, and in IRC messages. -# If you want a longer name shown for your project on the web -# interface, please use the "title" metadata key rather than -# putting that here. -# -$project = 'fteqw'; - -# The from address in generated mails. -$from_email = 'm00dl3s@gmail.com'; - -# Mail all reports to this address. -$dest_email = 'cia@cia.navi.cx'; - -# If using XML-RPC, connect to this URI. -$rpc_uri = 'http://cia.navi.cx/RPC2'; - -# Path to your USCD sendmail compatible binary (your mailer daemon created this -# program somewhere). -$sendmail = '/usr/sbin/sendmail'; - -# Number of seconds to wait for possible concurrent instances. CVS calls up -# this script for each involved directory separately and this is the sync -# delay. 5s looks as a safe value, but feel free to increase if you are running -# this on a slower (or overloaded) machine or if you have really a lot of -# directories. -# Increasing this could be a very good idea if you're on Sourceforge ;) -$sync_delay = 5; - -# This script can communicate with CIA either by mail or by an XML-RPC -# interface. The XML-RPC interface is faster and more efficient, however you -# need to have RPC::XML perl module installed, and some large CVS hosting sites -# (like Savannah or Sourceforge) might not allow outgoing HTTP connections -# while they allow outgoing mail. Also, this script will hang and eventually -# not deliver the event at all if CIA server happens to be down, which is -# unfortunately not an uncommon condition. -$xml_rpc = 0; - -# You can make this bot to totally ignore events concerning the objects -# specified below. Each object is composed of //, -# therefore file Manifest in root directory of module gentoo will be called -# "gentoo/Manifest", while file src/bfu/inphist.c of module elinks will be -# called "elinks/src/bfu/inphist.c". Easy, isn't it? -# -# This variable should contain regexp, against which will each object be -# checked, and if the regexp is matched, the file is ignored. Therefore ie. to -# ignore all changes in the two files above and everything concerning module -# 'admin', use: -# -# $ignore_regexp = "^(gentoo/Manifest|elinks/src/bfu/inphist.c|admin/)"; -$ignore_regexp = ""; - -# It can be useful to also grab the generated XML message by some other -# programs and ie. autogenerate some content based on it. Here you can specify -# a file to which it will be appended. -$alt_local_message_target = ""; - - - - -### The code itself - -use vars qw ($user $module $tag @files $logmsg $message); - -my @dir; # This array stores all the affected directories -my @dirfiles; # This array is mapped to the @dir array and contains files - # affected in each directory - - -# A nice nonprinting character we can use as a separator relatively safely. -# The commas in loginfo above give us 4 commas and a space between file -# names given to us on the command line. This is the separator used internally. -# Now we can handle filenames containing spaces, and probably anything except -# strings of 4 commas or the ASCII bell character. -# -# This was inspired by the suggestion in: -# http://mail.gnu.org/archive/html/info-cvs/2003-04/msg00267.html -# -$" = "\7"; - -### Input data loading - - -# These arguments are from %s; first the relative path in the repository -# and then the list of files modified. - -@files = split (' ,,,', ($ARGV[0] or '')); -$dir[0] = shift @files or die "$0: no directory specified\n"; -$dirfiles[0] = "@files" or die "$0: no files specified\n"; - - -# Guess module name. - -$module = $dir[0]; $module =~ s#/.*##; - - -# Figure out who is doing the update. - -$user = $ARGV[1]; - - -# Use the optional parameters, if supplied. - -$project = $ARGV[2] if $ARGV[2]; -$from_email = $ARGV[3] if $ARGV[3]; -$dest_email = $ARGV[4] if $ARGV[4]; -$ignore_regexp = $ARGV[5] if $ARGV[5]; - - -# Parse stdin (what's interesting is the tag and log message) - -while () { - $tag = $1 if /^\s*Tag: ([a-zA-Z0-9_-]+)/; - last if /^Log Message/; -} - -$logmsg = ""; -while () { - next unless ($_ and $_ ne "\n" and $_ ne "\r\n"); - s/&/&/g; - s//>/g; - $logmsg .= $_; -} - -### Remove to-be-ignored files - -$dirfiles[0] = join (' ', - grep { - my $f = "$dir[0]/$_"; - $f !~ m/$ignore_regexp/; - } split (/\s+/, $dirfiles[0]) -) if ($ignore_regexp); -exit unless $dirfiles[0]; - - - -### Sync between the multiple instances potentially being ran simultanously - -my $sum; # _VERY_ simple hash of the log message. It is really weak, but I'm - # lazy and it's really sorta exceptional to even get more commits - # running simultanously anyway. -$sum = 0; -map { $sum += ord $_ } split(//, $logmsg); - -my $syncfile; # Name of the file used for syncing -$syncfile = "/tmp/cvscia.$project.$module.$sum"; - - -if (-f $syncfile and -w $syncfile) { - # The synchronization file for this file already exists, so we are not the - # first ones. So let's just dump what we know and exit. - - open(FF, ">>$syncfile") or die "aieee... can't log, can't log! $syncfile blocked!"; - print FF "$dirfiles[0]!@!$dir[0]\n"; - close(FF); - exit; - -} else { - # We are the first one! Thus, we'll fork, exit the original instance, and - # wait a bit with the new one. Then we'll grab what the others collected and - # go on. - - # We don't need to care about permissions since all the instances of the one - # commit will obviously live as the same user. - - # system("touch") in a different way - open(FF, ">>$syncfile") or die "aieee... can't log, can't log! $syncfile blocked!"; - close(FF); - - exit if (fork); - sleep($sync_delay); - - open(FF, $syncfile); - my ($dirnum) = 1; # 0 is the one we got triggerred for - while () { - chomp; - ($dirfiles[$dirnum], $dir[$dirnum]) = split(/!@!/); - $dirnum++; - } - close(FF); - - unlink($syncfile); -} - - - -### Compose the mail message - - -my ($VERSION) = '2.4'; -my ($URL) = 'http://cia.navi.cx/clients/cvs/ciabot_cvs.pl'; -my $ts = time; - -$message = < - - CIA Perl client for CVS - $VERSION - $URL - - - $project - $module -EM -; -$message .= " $tag" if ($tag); -$message .= < - - $ts - - - - $user - -EM -; - -for (my $dirnum = 0; $dirnum < @dir; $dirnum++) { - map { - $_ = $dir[$dirnum] . '/' . $_; - s#^.*?/##; # weed out the module name - s/&/&/g; - s//>/g; - $message .= " $_\n"; - } split($", $dirfiles[$dirnum]); -} - -$message .= < - -$logmsg - - - - -EM -; - - - -### Write the message to an alt-target - -if ($alt_local_message_target and open (ALT, ">>$alt_local_message_target")) { - print ALT $message; - close ALT; -} - - - -### Send out the XML-RPC message - - -if ($xml_rpc) { - # We gotta be careful from now on. We silence all the warnings because - # RPC::XML code is crappy and works with undefs etc. - $^W = 0; - $RPC::XML::ERROR if (0); # silence perl's compile-time warning - - require RPC::XML; - require RPC::XML::Client; - - my $rpc_client = new RPC::XML::Client $rpc_uri; - my $rpc_request = RPC::XML::request->new('hub.deliver', $message); - my $rpc_response = $rpc_client->send_request($rpc_request); - - unless (ref $rpc_response) { - die "XML-RPC Error: $RPC::XML::ERROR\n"; - } - exit; -} - - - -### Send out the mail - - -# Open our mail program - -open (MAIL, "| $sendmail -t -oi -oem") or die "Cannot execute $sendmail : " . ($?>>8); - - -# The mail header - -print MAIL <> 8) . "\n" unless ($? == 0); - -# vi: set sw=2: diff --git a/CVSROOT/commitinfo b/CVSROOT/commitinfo deleted file mode 100644 index b19e7b7a6..000000000 --- a/CVSROOT/commitinfo +++ /dev/null @@ -1,15 +0,0 @@ -# The "commitinfo" file is used to control pre-commit checks. -# The filter on the right is invoked with the repository and a list -# of files to check. A non-zero exit of the filter program will -# cause the commit to be aborted. -# -# The first entry on a line is a regular expression which is tested -# against the directory that the change is being committed to, relative -# to the $CVSROOT. For the first match that is found, then the remainder -# of the line is the name of the filter to run. -# -# If the repository name does not match any of the regular expressions in this -# file, the "DEFAULT" line is used, if it is specified. -# -# If the name "ALL" appears as a regular expression it is always used -# in addition to the first matching regex or "DEFAULT". diff --git a/CVSROOT/config b/CVSROOT/config deleted file mode 100644 index 92c150bf7..000000000 --- a/CVSROOT/config +++ /dev/null @@ -1,21 +0,0 @@ -# Set this to "no" if pserver shouldn't check system users/passwords -#SystemAuth=no - -# Put CVS lock files in this directory rather than directly in the repository. -#LockDir=/var/lock/cvs - -# Set `TopLevelAdmin' to `yes' to create a CVS directory at the top -# level of the new working directory when using the `cvs checkout' -# command. -#TopLevelAdmin=no - -# Set `LogHistory' to `all' or `TOEFWUPCGMAR' to log all transactions to the -# history file, or a subset as needed (ie `TMAR' logs all write operations) -#LogHistory=TOEFWUPCGMAR - -# Set `RereadLogAfterVerify' to `always' (the default) to allow the verifymsg -# script to change the log message. Set it to `stat' to force CVS to verify# that the file has changed before reading it (this can take up to an extra -# second per directory being committed, so it is not recommended for large -# repositories. Set it to `never' (the previous CVS behavior) to prevent -# verifymsg scripts from changing the log message. -#RereadLogAfterVerify=always diff --git a/CVSROOT/cvswrappers b/CVSROOT/cvswrappers deleted file mode 100644 index e989b7545..000000000 --- a/CVSROOT/cvswrappers +++ /dev/null @@ -1,19 +0,0 @@ -# This file affects handling of files based on their names. -# -# The -m option specifies whether CVS attempts to merge files. -# -# The -k option specifies keyword expansion (e.g. -kb for binary). -# -# Format of wrapper file ($CVSROOT/CVSROOT/cvswrappers or .cvswrappers) -# -# wildcard [option value][option value]... -# -# where option is one of -# -f from cvs filter value: path to filter -# -t to cvs filter value: path to filter -# -m update methodology value: MERGE or COPY -# -k expansion mode value: b, o, kkv, &c -# -# and value is a single-quote delimited value. -# For example: -#*.gif -k 'b' diff --git a/CVSROOT/editinfo b/CVSROOT/editinfo deleted file mode 100644 index d78886c15..000000000 --- a/CVSROOT/editinfo +++ /dev/null @@ -1,21 +0,0 @@ -# The "editinfo" file is used to allow verification of logging -# information. It works best when a template (as specified in the -# rcsinfo file) is provided for the logging procedure. Given a -# template with locations for, a bug-id number, a list of people who -# reviewed the code before it can be checked in, and an external -# process to catalog the differences that were code reviewed, the -# following test can be applied to the code: -# -# Making sure that the entered bug-id number is correct. -# Validating that the code that was reviewed is indeed the code being -# checked in (using the bug-id number or a seperate review -# number to identify this particular code set.). -# -# If any of the above test failed, then the commit would be aborted. -# -# Actions such as mailing a copy of the report to each reviewer are -# better handled by an entry in the loginfo file. -# -# One thing that should be noted is the the ALL keyword is not -# supported. There can be only one entry that matches a given -# repository. diff --git a/CVSROOT/loginfo b/CVSROOT/loginfo deleted file mode 100644 index 58ff13a76..000000000 --- a/CVSROOT/loginfo +++ /dev/null @@ -1,28 +0,0 @@ -# The "loginfo" file controls where "cvs commit" log information -# is sent. The first entry on a line is a regular expression which must match -# the directory that the change is being made to, relative to the -# $CVSROOT. If a match is found, then the remainder of the line is a filter -# program that should expect log information on its standard input. -# -# If the repository name does not match any of the regular expressions in this -# file, the "DEFAULT" line is used, if it is specified. -# -# If the name ALL appears as a regular expression it is always used -# in addition to the first matching regex or DEFAULT. -# -# You may specify a format string as part of the -# filter. The string is composed of a `%' followed -# by a single format character, or followed by a set of format -# characters surrounded by `{' and `}' as separators. The format -# characters are: -# -# s = file name -# V = old version number (pre-checkin) -# v = new version number (post-checkin) -# t = tag or branch name -# -# For example: -#DEFAULT (echo ""; id; echo %s; date; cat) >> $CVSROOT/CVSROOT/commitlog -# or -#DEFAULT (echo ""; id; echo %{sVv}; date; cat) >> $CVSROOT/CVSROOT/commitlog -ALL /usr/bin/perl $CVSROOT/CVSROOT/ciabot_cvs.pl %{,,,s} $USER diff --git a/CVSROOT/modules b/CVSROOT/modules deleted file mode 100644 index cb9e9efc9..000000000 --- a/CVSROOT/modules +++ /dev/null @@ -1,26 +0,0 @@ -# Three different line formats are valid: -# key -a aliases... -# key [options] directory -# key [options] directory files... -# -# Where "options" are composed of: -# -i prog Run "prog" on "cvs commit" from top-level of module. -# -o prog Run "prog" on "cvs checkout" of module. -# -e prog Run "prog" on "cvs export" of module. -# -t prog Run "prog" on "cvs rtag" of module. -# -u prog Run "prog" on "cvs update" of module. -# -d dir Place module in directory "dir" instead of module name. -# -l Top-level directory only -- do not recurse. -# -# NOTE: If you change any of the "Run" options above, you'll have to -# release and re-checkout any working directories of these modules. -# -# And "directory" is a path to a directory relative to $CVSROOT. -# -# The "-a" option specifies an alias. An alias is interpreted as if -# everything on the right of the "-a" had been typed on the command line. -# -# You can encode a module within a module by using the special '&' -# character to interpose another module into the current module. This -# can be useful for creating a module that consists of many directories -# spread out over the entire source repository. diff --git a/CVSROOT/notify b/CVSROOT/notify deleted file mode 100644 index 74ae6f9e9..000000000 --- a/CVSROOT/notify +++ /dev/null @@ -1,12 +0,0 @@ -# The "notify" file controls where notifications from watches set by -# "cvs watch add" or "cvs edit" are sent. The first entry on a line is -# a regular expression which is tested against the directory that the -# change is being made to, relative to the $CVSROOT. If it matches, -# then the remainder of the line is a filter program that should contain -# one occurrence of %s for the user to notify, and information on its -# standard input. -# -# "ALL" or "DEFAULT" can be used in place of the regular expression. -# -# For example: -#ALL mail -s "CVS notification" %s diff --git a/CVSROOT/rcsinfo b/CVSROOT/rcsinfo deleted file mode 100644 index 49e59f4d0..000000000 --- a/CVSROOT/rcsinfo +++ /dev/null @@ -1,13 +0,0 @@ -# The "rcsinfo" file is used to control templates with which the editor -# is invoked on commit and import. -# -# The first entry on a line is a regular expression which is tested -# against the directory that the change is being made to, relative to the -# $CVSROOT. For the first match that is found, then the remainder of the -# line is the name of the file that contains the template. -# -# If the repository name does not match any of the regular expressions in this -# file, the "DEFAULT" line is used, if it is specified. -# -# If the name "ALL" appears as a regular expression it is always used -# in addition to the first matching regex or "DEFAULT". diff --git a/CVSROOT/taginfo b/CVSROOT/taginfo deleted file mode 100644 index 274a46dd5..000000000 --- a/CVSROOT/taginfo +++ /dev/null @@ -1,20 +0,0 @@ -# The "taginfo" file is used to control pre-tag checks. -# The filter on the right is invoked with the following arguments: -# -# $1 -- tagname -# $2 -- operation "add" for tag, "mov" for tag -F, and "del" for tag -d -# $3 -- repository -# $4-> file revision [file revision ...] -# -# A non-zero exit of the filter program will cause the tag to be aborted. -# -# The first entry on a line is a regular expression which is tested -# against the directory that the change is being committed to, relative -# to the $CVSROOT. For the first match that is found, then the remainder -# of the line is the name of the filter to run. -# -# If the repository name does not match any of the regular expressions in this -# file, the "DEFAULT" line is used, if it is specified. -# -# If the name "ALL" appears as a regular expression it is always used -# in addition to the first matching regex or "DEFAULT". diff --git a/CVSROOT/verifymsg b/CVSROOT/verifymsg deleted file mode 100644 index 86f747ce2..000000000 --- a/CVSROOT/verifymsg +++ /dev/null @@ -1,21 +0,0 @@ -# The "verifymsg" file is used to allow verification of logging -# information. It works best when a template (as specified in the -# rcsinfo file) is provided for the logging procedure. Given a -# template with locations for, a bug-id number, a list of people who -# reviewed the code before it can be checked in, and an external -# process to catalog the differences that were code reviewed, the -# following test can be applied to the code: -# -# Making sure that the entered bug-id number is correct. -# Validating that the code that was reviewed is indeed the code being -# checked in (using the bug-id number or a seperate review -# number to identify this particular code set.). -# -# If any of the above test failed, then the commit would be aborted. -# -# Actions such as mailing a copy of the report to each reviewer are -# better handled by an entry in the loginfo file. -# -# One thing that should be noted is the the ALL keyword is not -# supported. There can be only one entry that matches a given -# repository.