eukara/fteqw
1
0
Fork 0
forked from fte/fteqw
Code Pull requests Activity
fteqw/engine/shaders/glsl/defaultwall.glsl
Spoike 3c5518afa8 Optimised the textures of defaultwall with fast preset. 
Fix simpleitems transparency in gles2.
Fix a couple of GL errors in gles2 (including some fixed function stuff that could result in segfaults).
Dynamically adjust MTU values with legacy qw clients too.
Added some small sleeps while waiting for downloads (this fixes insanely slow valgrind startups but might make non-valgrind start a smidge slower).
Fix title metadata in the updates system.
Clean up some issues for when WEBCLIENT is not defined.
HAVE_HTTPSV also disables websocket connections, to completely avoid any http strings anywhere, in the hope that it reduces virus scanner false positives.
Fix presets initial option, again.
Writing files to FS_GAMEONLY no longer purges the entire fscache, which should give a speedup in certain situations.
Added some new cvars to control heightmap lightmap generation.



git-svn-id: https://svn.code.sf.net/p/fteqw/code/trunk@5461 fc73d0e0-1445-4013-8a0c-d673dee63da5
2019-05-23 15:11:32 +00:00

403 lines
12 KiB
GLSL
Raw Blame History

!!ver 100 450
!!permu TESS
!!permu DELUXE
!!permu FULLBRIGHT
!!permu FOG
!!permu LIGHTSTYLED
!!permu BUMP
!!permu SPECULAR
!!permu REFLECTCUBEMASK
!!cvarf r_glsl_offsetmapping_scale
!!cvardf r_tessellation_level=5
!!samps diffuse
!!samps !EIGHTBIT =FULLBRIGHT fullbright
!!samps !EIGHTBIT =BUMP normalmap
!!samps !EIGHTBIT =REFLECTCUBEMASK reflectmask reflectcube
//diffuse gives us alpha, and prevents dlight from bugging out when there's no diffuse.
!!samps =EIGHTBIT paletted 1
!!samps =SPECULAR specular
!!samps lightmap
!!samps =LIGHTSTYLED lightmap1 lightmap2 lightmap3
!!samps =DELUXE deluxmap
!!samps =LIGHTSTYLED =DELUXE deluxemap1 deluxemap2 deluxemap3
#if defined(ORM) || defined(SG)
#define PBR
#endif
#include "sys/defs.h"
//this is what normally draws all of your walls, even with rtlights disabled
//note that the '286' preset uses drawflat_walls instead.
#include "sys/fog.h"
#if !defined(TESS_CONTROL_SHADER)
#if defined(OFFSETMAPPING) || defined(SPECULAR) || defined(REFLECTCUBEMASK)
varying vec3 eyevector;
#endif
#if defined(REFLECTCUBEMASK) || defined(BUMPMODELSPACE)
varying mat3 invsurface;
#endif
varying vec2 tc;
#ifdef VERTEXLIT
varying vec4 vc;
#else
#ifdef LIGHTSTYLED
//we could use an offset, but that would still need to be per-surface which would break batches
//fixme: merge attributes?
varying vec2 lm0, lm1, lm2, lm3;
#else
varying vec2 lm0;
#endif
#endif
#endif
#ifdef VERTEX_SHADER
#ifdef TESS
varying vec3 vertex, normal;
#endif
void main ()
{
#if defined(OFFSETMAPPING) || defined(SPECULAR) || defined(REFLECTCUBEMASK)
vec3 eyeminusvertex = e_eyepos - v_position.xyz;
eyevector.x = dot(eyeminusvertex, v_svector.xyz);
eyevector.y = dot(eyeminusvertex, v_tvector.xyz);
eyevector.z = dot(eyeminusvertex, v_normal.xyz);
#endif
#if defined(REFLECTCUBEMASK) || defined(BUMPMODELSPACE)
invsurface = mat3(v_svector, v_tvector, v_normal);
#endif
tc = v_texcoord;
#ifdef FLOW
tc.s += e_time * -0.5;
#endif
#ifdef VERTEXLIT
#ifdef LIGHTSTYLED
//FIXME, only one colour.
vc = v_colour * e_lmscale[0];
#else
vc = v_colour * e_lmscale;
#endif
#else
lm0 = v_lmcoord;
#ifdef LIGHTSTYLED
lm1 = v_lmcoord2;
lm2 = v_lmcoord3;
lm3 = v_lmcoord4;
#endif
#endif
gl_Position = ftetransform();
#ifdef TESS
vertex = v_position;
normal = v_normal;
#endif
}
#endif
#if defined(TESS_CONTROL_SHADER)
layout(vertices = 3) out;
in vec3 vertex[];
out vec3 t_vertex[];
in vec3 normal[];
out vec3 t_normal[];
#if defined(OFFSETMAPPING) || defined(SPECULAR) || defined(REFLECTCUBEMASK)
in vec3 eyevector[];
out vec3 t_eyevector[];
#endif
#ifdef REFLECTCUBEMASK
in mat3 invsurface[];
out mat3 t_invsurface[];
#endif
in vec2 tc[];
out vec2 t_tc[];
#ifdef VERTEXLIT
in vec4 vc[];
out vec4 t_vc[];
#else
in vec2 lm0[];
out vec2 t_lm0[];
#ifdef LIGHTSTYLED
in vec2 lm1[], lm2[], lm3[];
out vec2 t_lm1[], t_lm2[], t_lm3[];
#endif
#endif
void main()
{
//the control shader needs to pass stuff through
#define id gl_InvocationID
t_vertex[id] = vertex[id];
t_normal[id] = normal[id];
#ifdef REFLECTCUBEMASK
t_invsurface[id] = invsurface[id];
#endif
t_tc[id] = tc[id];
#ifdef VERTEXLIT
t_vc[id] = vc[id];
#else
t_lm0[id] = lm0[id];
#ifdef LIGHTSTYLED
t_lm1[id] = lm1[id];
t_lm2[id] = lm2[id];
t_lm3[id] = lm3[id];
#endif
#endif
#if defined(SPECULAR) || defined(OFFSETMAPPING) || defined(REFLECTCUBEMASK)
t_eyevector[id] = eyevector[id];
#endif
gl_TessLevelOuter[0] = float(r_tessellation_level);
gl_TessLevelOuter[1] = float(r_tessellation_level);
gl_TessLevelOuter[2] = float(r_tessellation_level);
gl_TessLevelInner[0] = float(r_tessellation_level);
}
#endif
#if defined(TESS_EVALUATION_SHADER)
layout(triangles) in;
in vec3 t_vertex[];
in vec3 t_normal[];
#if defined(OFFSETMAPPING) || defined(SPECULAR) || defined(REFLECTCUBEMASK)
in vec3 t_eyevector[];
#endif
#ifdef REFLECTCUBEMASK
in mat3 t_invsurface[];
#endif
in vec2 t_tc[];
#ifdef VERTEXLIT
in vec4 t_vc[];
#else
#ifdef LIGHTSTYLED
//we could use an offset, but that would still need to be per-surface which would break batches
//fixme: merge attributes?
in vec2 t_lm0[], t_lm1[], t_lm2[], t_lm3[];
#else
in vec2 t_lm0[];
#endif
#endif
#define LERP(a) (gl_TessCoord.x*a[0] + gl_TessCoord.y*a[1] + gl_TessCoord.z*a[2])
void main()
{
#define factor 1.0
tc = LERP(t_tc);
#ifdef VERTEXLIT
vc = LERP(t_vc);
#else
lm0 = LERP(t_lm0);
#ifdef LIGHTSTYLED
lm1 = LERP(t_lm1);
lm2 = LERP(t_lm2);
lm3 = LERP(t_lm3);
#endif
#endif
vec3 w = LERP(t_vertex);
vec3 t0 = w - dot(w-t_vertex[0],t_normal[0])*t_normal[0];
vec3 t1 = w - dot(w-t_vertex[1],t_normal[1])*t_normal[1];
vec3 t2 = w - dot(w-t_vertex[2],t_normal[2])*t_normal[2];
w = w*(1.0-factor) + factor*(gl_TessCoord.x*t0+gl_TessCoord.y*t1+gl_TessCoord.z*t2);
#if defined(PCF) || defined(SPOT) || defined(CUBE)
//for texture projections/shadowmapping on dlights
vtexprojcoord = (l_cubematrix*vec4(w.xyz, 1.0));
#endif
//FIXME: we should be recalcing these here, instead of just lerping them
#ifdef REFLECTCUBEMASK
invsurface = LERP(t_invsurface);
#endif
#if defined(SPECULAR) || defined(OFFSETMAPPING) || defined(REFLECTCUBEMASK)
eyevector = LERP(t_eyevector);
#endif
gl_Position = m_modelviewprojection * vec4(w,1.0);
}
#endif
#ifdef FRAGMENT_SHADER
#define s_colourmap s_t0
#include "sys/pbr.h"
#ifdef OFFSETMAPPING
#include "sys/offsetmapping.h"
#endif
void main ()
{
//adjust texture coords for offsetmapping
#ifdef OFFSETMAPPING
vec2 tcoffsetmap = offsetmap(s_normalmap, tc, eyevector);
#define tc tcoffsetmap
#endif
#if defined(EIGHTBIT) && !defined(LIGHTSTYLED)
//optional: round the lightmap coords to ensure all pixels within a texel have different lighting values either. it just looks wrong otherwise.
//don't bother if its lightstyled, such cases will have unpredictable correlations anyway.
//FIXME: this rounding is likely not correct with respect to software rendering. oh well.
#if __VERSION__ >= 130
vec2 lmsize = vec2(textureSize(s_lightmap0, 0));
#else
#define lmsize vec2(128.0,2048.0)
#endif
#define texelstolightmap (16.0)
vec2 lmcoord0 = floor(lm0 * lmsize*texelstolightmap)/(lmsize*texelstolightmap);
#define lm0 lmcoord0
#endif
//Read the base texture (with EIGHTBIT only alpha is needed)
vec4 col = texture2D(s_diffuse, tc);
#if defined(BUMP) && (defined(DELUXE) || defined(SPECULAR) || defined(REFLECTCUBEMASK))
vec3 norm = normalize(texture2D(s_normalmap, tc).rgb - 0.5);
#elif defined(PBR) || defined(SPECULAR) || defined(DELUXE) || defined(REFLECTCUBEMASK)
vec3 norm = vec3(0, 0, 1); //specular lighting expects this to exist.
#endif
//modulate that by the lightmap(s) including deluxemap(s)
#ifdef VERTEXLIT
#ifdef LIGHTSTYLED
vec3 lightmaps = vc.rgb;
#else
vec3 lightmaps = vc.rgb;
#endif
#define deluxe vec3(0.0,0.0,1.0)
#else
#ifdef LIGHTSTYLED
#define deluxe vec3(0.0,0.0,1.0)
vec3 lightmaps;
#ifdef DELUXE
lightmaps = texture2D(s_lightmap0, lm0).rgb * e_lmscale[0].rgb * dot(norm, 2.0*texture2D(s_deluxemap0, lm0).rgb-0.5);
lightmaps += texture2D(s_lightmap1, lm1).rgb * e_lmscale[1].rgb * dot(norm, 2.0*texture2D(s_deluxemap1, lm1).rgb-0.5);
lightmaps += texture2D(s_lightmap2, lm2).rgb * e_lmscale[2].rgb * dot(norm, 2.0*texture2D(s_deluxemap2, lm2).rgb-0.5);
lightmaps += texture2D(s_lightmap3, lm3).rgb * e_lmscale[3].rgb * dot(norm, 2.0*texture2D(s_deluxemap3, lm3).rgb-0.5);
#else
lightmaps = texture2D(s_lightmap0, lm0).rgb * e_lmscale[0].rgb;
lightmaps += texture2D(s_lightmap1, lm1).rgb * e_lmscale[1].rgb;
lightmaps += texture2D(s_lightmap2, lm2).rgb * e_lmscale[2].rgb;
lightmaps += texture2D(s_lightmap3, lm3).rgb * e_lmscale[3].rgb;
#endif
#else
vec3 lightmaps = (texture2D(s_lightmap, lm0) * e_lmscale).rgb;
//modulate by the bumpmap dot light
#ifdef DELUXE
vec3 deluxe = (texture2D(s_deluxemap, lm0).rgb-0.5);
#ifdef BUMPMODELSPACE
deluxe = normalize(deluxe*invsurface);
#else
deluxe = normalize(deluxe);
lightmaps *= 2.0 / max(0.25, deluxe.z); //counter the darkening from deluxemaps
#endif
lightmaps *= dot(norm, deluxe);
#else
#define deluxe vec3(0.0,0.0,1.0)
#endif
#endif
#endif
// col *= factor_base;
#define dielectricSpecular 0.04
#ifdef SPECULAR
vec4 specs = texture2D(s_specular, tc);//*factor_spec;
#ifdef ORM
#define occlusion specs.r
#define roughness specs.g
#define metalness specs.b
#define gloss (1.0-roughness)
#define ambientrgb (specrgb+col.rgb)
vec3 specrgb = mix(vec3(dielectricSpecular), col.rgb, metalness);
col.rgb = col.rgb * (1.0 - dielectricSpecular) * (1.0-metalness);
#elif defined(SG) //pbr-style specular+glossiness
//occlusion needs to be baked in. :(
#define roughness (1.0-specs.a)
#define gloss specs.a
#define specrgb specs.rgb
#define ambientrgb (specs.rgb+col.rgb)
#else //blinn-phong
#define roughness (1.0-specs.a)
#define gloss specs.a
#define specrgb specs.rgb
#define ambientrgb col.rgb
#endif
#else
#define roughness 0.3
#define specrgb 1.0 //vec3(dielectricSpecular)
#endif
//add in specular, if applicable.
#ifdef PBR
col.rgb = DoPBR(norm, normalize(eyevector), deluxe, roughness, col.rgb, specrgb, vec3(0.0,1.0,1.0));//*e_light_mul + e_light_ambient*.25*ambientrgb;
#elif defined(gloss)
vec3 halfdir = normalize(normalize(eyevector) + deluxe); //this norm should be the deluxemap info instead
float spec = pow(max(dot(halfdir, norm), 0.0), FTE_SPECULAR_EXPONENT * gloss);
spec *= FTE_SPECULAR_MULTIPLIER;
//NOTE: rtlights tend to have a *4 scaler here to over-emphasise the effect because it looks cool.
//As not all maps will have deluxemapping, and the double-cos from the light util makes everything far too dark anyway,
//we default to something that is not garish when the light value is directly infront of every single pixel.
//we can justify this difference due to the rtlight editor etc showing the *4.
col.rgb += spec * specrgb;
#endif
#ifdef REFLECTCUBEMASK
vec3 rtc = reflect(normalize(-eyevector), norm);
rtc = rtc.x*invsurface[0] + rtc.y*invsurface[1] + rtc.z*invsurface[2];
rtc = (m_model * vec4(rtc.xyz,0.0)).xyz;
col.rgb += texture2D(s_reflectmask, tc).rgb * textureCube(s_reflectcube, rtc).rgb;
#endif
#ifdef EIGHTBIT //FIXME: with this extra flag, half the permutations are redundant.
lightmaps *= 0.5; //counter the fact that the colourmap contains overbright values and logically ranges from 0 to 2 intead of to 1.
float pal = texture2D(s_paletted, tc).r; //the palette index. hopefully not interpolated.
lightmaps -= 1.0 / 128.0; //software rendering appears to round down, so make sure we favour the lower values instead of rounding to the nearest
col.r = texture2D(s_colourmap, vec2(pal, 1.0-lightmaps.r)).r; //do 3 lookups. this is to cope with lit files, would be a waste to not support those.
col.g = texture2D(s_colourmap, vec2(pal, 1.0-lightmaps.g)).g; //its not very softwarey, but re-palettizing is ugly.
col.b = texture2D(s_colourmap, vec2(pal, 1.0-lightmaps.b)).b; //without lits, it should be identical.
#else
//now we have our diffuse+specular terms, modulate by lightmap values.
col.rgb *= lightmaps.rgb;
//add on the fullbright
#ifdef FULLBRIGHT
col.rgb += texture2D(s_fullbright, tc).rgb;
#endif
#endif
//entity modifiers
col *= e_colourident;
#if defined(MASK)
#if defined(MASKLT)
if (col.a < MASK)
discard;
#else
if (col.a >= MASK)
discard;
#endif
col.a = 1.0; //alpha blending AND alpha testing usually looks stupid, plus it screws up our fog.
#endif
//and finally hide it all if we're fogged.
gl_FragColor = fog4(col);
}
#endif
View git blame Copy permalink