mirror of
https://github.com/dhewm/dhewm3.git
synced 2024-11-29 07:32:25 +00:00
c22965bf58
In the savegame from that bugreport, "monster_zsec_shotgun_12" was lying dead pretty much at its spawn point. script/map_alphalabs4.script moves those "ride_of_death" platforms around, and at the end of a cycle teleports "ride_of_death*_parent" back to its starting position - and the "ride_of_death*" bound to it, which is a pushing mover, just gets dragged along by the physics code and thus can collide with that zombie cadaver, which then tries to push it along, causing that assertion in TestHugeTranslation(). This is a map bug - Doom3 even prints a warning: WARNING: script/map_alphalabs4.script(722): Thread 'map_alphalabs4::RideOfDeathPath': teleported 'ride_of_death2_parent' which has the pushing mover 'ride_of_death2' bound to it So I just disable that assertion for this specific case.. Also moved the assertion behind the corresponding warning, so that gets printed before the assertion kills the game.. Also a small change to CMakeLists.txt that should make enabling LINUX_RELEASE_BINS after CMake has already been run without it work
1101 lines
35 KiB
C++
1101 lines
35 KiB
C++
/*
|
|
===========================================================================
|
|
|
|
Doom 3 GPL Source Code
|
|
Copyright (C) 1999-2011 id Software LLC, a ZeniMax Media company.
|
|
|
|
This file is part of the Doom 3 GPL Source Code ("Doom 3 Source Code").
|
|
|
|
Doom 3 Source Code is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
Doom 3 Source Code is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with Doom 3 Source Code. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
In addition, the Doom 3 Source Code is also subject to certain additional terms. You should have received a copy of these additional terms immediately following the terms and conditions of the GNU General Public License which accompanied the Doom 3 Source Code. If not, please request a copy in writing from id Software at the address below.
|
|
|
|
If you have questions concerning this license or the applicable additional terms, you may contact in writing id Software LLC, c/o ZeniMax Media Inc., Suite 120, Rockville, Maryland 20850 USA.
|
|
|
|
===========================================================================
|
|
*/
|
|
|
|
/*
|
|
===============================================================================
|
|
|
|
Trace model vs. polygonal model collision detection.
|
|
|
|
===============================================================================
|
|
*/
|
|
|
|
#include "sys/platform.h"
|
|
#include "framework/Session.h"
|
|
#include "renderer/RenderWorld.h"
|
|
|
|
#include "cm/CollisionModel_local.h"
|
|
|
|
/*
|
|
===============================================================================
|
|
|
|
Collision detection for translational motion
|
|
|
|
===============================================================================
|
|
*/
|
|
|
|
/*
|
|
================
|
|
idCollisionModelManagerLocal::TranslateEdgeThroughEdge
|
|
|
|
calculates fraction of the translation completed at which the edges collide
|
|
================
|
|
*/
|
|
ID_INLINE int idCollisionModelManagerLocal::TranslateEdgeThroughEdge( idVec3 &cross, idPluecker &l1, idPluecker &l2, float *fraction ) {
|
|
|
|
float d, t;
|
|
|
|
/*
|
|
|
|
a = start of line
|
|
b = end of line
|
|
dir = movement direction
|
|
l1 = pluecker coordinate for line
|
|
l2 = pluecker coordinate for edge we might collide with
|
|
a+dir = start of line after movement
|
|
b+dir = end of line after movement
|
|
t = scale factor
|
|
solve pluecker inner product for t of line (a+t*dir : b+t*dir) and line l2
|
|
|
|
v[0] = (a[0]+t*dir[0]) * (b[1]+t*dir[1]) - (b[0]+t*dir[0]) * (a[1]+t*dir[1]);
|
|
v[1] = (a[0]+t*dir[0]) * (b[2]+t*dir[2]) - (b[0]+t*dir[0]) * (a[2]+t*dir[2]);
|
|
v[2] = (a[0]+t*dir[0]) - (b[0]+t*dir[0]);
|
|
v[3] = (a[1]+t*dir[1]) * (b[2]+t*dir[2]) - (b[1]+t*dir[1]) * (a[2]+t*dir[2]);
|
|
v[4] = (a[2]+t*dir[2]) - (b[2]+t*dir[2]);
|
|
v[5] = (b[1]+t*dir[1]) - (a[1]+t*dir[1]);
|
|
|
|
l2[0] * v[4] + l2[1] * v[5] + l2[2] * v[3] + l2[4] * v[0] + l2[5] * v[1] + l2[3] * v[2] = 0;
|
|
|
|
solve t
|
|
|
|
v[0] = (a[0]+t*dir[0]) * (b[1]+t*dir[1]) - (b[0]+t*dir[0]) * (a[1]+t*dir[1]);
|
|
v[0] = (a[0]*b[1]) + a[0]*t*dir[1] + b[1]*t*dir[0] + (t*t*dir[0]*dir[1]) -
|
|
((b[0]*a[1]) + b[0]*t*dir[1] + a[1]*t*dir[0] + (t*t*dir[0]*dir[1]));
|
|
v[0] = a[0]*b[1] + a[0]*t*dir[1] + b[1]*t*dir[0] - b[0]*a[1] - b[0]*t*dir[1] - a[1]*t*dir[0];
|
|
|
|
v[1] = (a[0]+t*dir[0]) * (b[2]+t*dir[2]) - (b[0]+t*dir[0]) * (a[2]+t*dir[2]);
|
|
v[1] = (a[0]*b[2]) + a[0]*t*dir[2] + b[2]*t*dir[0] + (t*t*dir[0]*dir[2]) -
|
|
((b[0]*a[2]) + b[0]*t*dir[2] + a[2]*t*dir[0] + (t*t*dir[0]*dir[2]));
|
|
v[1] = a[0]*b[2] + a[0]*t*dir[2] + b[2]*t*dir[0] - b[0]*a[2] - b[0]*t*dir[2] - a[2]*t*dir[0];
|
|
|
|
v[2] = (a[0]+t*dir[0]) - (b[0]+t*dir[0]);
|
|
v[2] = a[0] - b[0];
|
|
|
|
v[3] = (a[1]+t*dir[1]) * (b[2]+t*dir[2]) - (b[1]+t*dir[1]) * (a[2]+t*dir[2]);
|
|
v[3] = (a[1]*b[2]) + a[1]*t*dir[2] + b[2]*t*dir[1] + (t*t*dir[1]*dir[2]) -
|
|
((b[1]*a[2]) + b[1]*t*dir[2] + a[2]*t*dir[1] + (t*t*dir[1]*dir[2]));
|
|
v[3] = a[1]*b[2] + a[1]*t*dir[2] + b[2]*t*dir[1] - b[1]*a[2] - b[1]*t*dir[2] - a[2]*t*dir[1];
|
|
|
|
v[4] = (a[2]+t*dir[2]) - (b[2]+t*dir[2]);
|
|
v[4] = a[2] - b[2];
|
|
|
|
v[5] = (b[1]+t*dir[1]) - (a[1]+t*dir[1]);
|
|
v[5] = b[1] - a[1];
|
|
|
|
|
|
v[0] = a[0]*b[1] + a[0]*t*dir[1] + b[1]*t*dir[0] - b[0]*a[1] - b[0]*t*dir[1] - a[1]*t*dir[0];
|
|
v[1] = a[0]*b[2] + a[0]*t*dir[2] + b[2]*t*dir[0] - b[0]*a[2] - b[0]*t*dir[2] - a[2]*t*dir[0];
|
|
v[2] = a[0] - b[0];
|
|
v[3] = a[1]*b[2] + a[1]*t*dir[2] + b[2]*t*dir[1] - b[1]*a[2] - b[1]*t*dir[2] - a[2]*t*dir[1];
|
|
v[4] = a[2] - b[2];
|
|
v[5] = b[1] - a[1];
|
|
|
|
v[0] = (a[0]*dir[1] + b[1]*dir[0] - b[0]*dir[1] - a[1]*dir[0]) * t + a[0]*b[1] - b[0]*a[1];
|
|
v[1] = (a[0]*dir[2] + b[2]*dir[0] - b[0]*dir[2] - a[2]*dir[0]) * t + a[0]*b[2] - b[0]*a[2];
|
|
v[2] = a[0] - b[0];
|
|
v[3] = (a[1]*dir[2] + b[2]*dir[1] - b[1]*dir[2] - a[2]*dir[1]) * t + a[1]*b[2] - b[1]*a[2];
|
|
v[4] = a[2] - b[2];
|
|
v[5] = b[1] - a[1];
|
|
|
|
l2[4] * (a[0]*dir[1] + b[1]*dir[0] - b[0]*dir[1] - a[1]*dir[0]) * t + l2[4] * (a[0]*b[1] - b[0]*a[1])
|
|
+ l2[5] * (a[0]*dir[2] + b[2]*dir[0] - b[0]*dir[2] - a[2]*dir[0]) * t + l2[5] * (a[0]*b[2] - b[0]*a[2])
|
|
+ l2[3] * (a[0] - b[0])
|
|
+ l2[2] * (a[1]*dir[2] + b[2]*dir[1] - b[1]*dir[2] - a[2]*dir[1]) * t + l2[2] * (a[1]*b[2] - b[1]*a[2])
|
|
+ l2[0] * (a[2] - b[2])
|
|
+ l2[1] * (b[1] - a[1]) = 0
|
|
|
|
t = (- l2[4] * (a[0]*b[1] - b[0]*a[1]) -
|
|
l2[5] * (a[0]*b[2] - b[0]*a[2]) -
|
|
l2[3] * (a[0] - b[0]) -
|
|
l2[2] * (a[1]*b[2] - b[1]*a[2]) -
|
|
l2[0] * (a[2] - b[2]) -
|
|
l2[1] * (b[1] - a[1])) /
|
|
(l2[4] * (a[0]*dir[1] + b[1]*dir[0] - b[0]*dir[1] - a[1]*dir[0]) +
|
|
l2[5] * (a[0]*dir[2] + b[2]*dir[0] - b[0]*dir[2] - a[2]*dir[0]) +
|
|
l2[2] * (a[1]*dir[2] + b[2]*dir[1] - b[1]*dir[2] - a[2]*dir[1]));
|
|
|
|
d = l2[4] * (a[0]*dir[1] + b[1]*dir[0] - b[0]*dir[1] - a[1]*dir[0]) +
|
|
l2[5] * (a[0]*dir[2] + b[2]*dir[0] - b[0]*dir[2] - a[2]*dir[0]) +
|
|
l2[2] * (a[1]*dir[2] + b[2]*dir[1] - b[1]*dir[2] - a[2]*dir[1]);
|
|
|
|
t = - ( l2[4] * (a[0]*b[1] - b[0]*a[1]) +
|
|
l2[5] * (a[0]*b[2] - b[0]*a[2]) +
|
|
l2[3] * (a[0] - b[0]) +
|
|
l2[2] * (a[1]*b[2] - b[1]*a[2]) +
|
|
l2[0] * (a[2] - b[2]) +
|
|
l2[1] * (b[1] - a[1]));
|
|
t /= d;
|
|
|
|
MrE pats Pluecker on the head.. good monkey
|
|
|
|
edgeDir = a - b;
|
|
d = l2[4] * (edgeDir[0]*dir[1] - edgeDir[1]*dir[0]) +
|
|
l2[5] * (edgeDir[0]*dir[2] - edgeDir[2]*dir[0]) +
|
|
l2[2] * (edgeDir[1]*dir[2] - edgeDir[2]*dir[1]);
|
|
*/
|
|
|
|
d = l2[4] * cross[0] + l2[5] * cross[1] + l2[2] * cross[2];
|
|
|
|
if ( d == 0.0f ) {
|
|
*fraction = 1.0f;
|
|
// no collision ever
|
|
return false;
|
|
}
|
|
|
|
t = -l1.PermutedInnerProduct( l2 );
|
|
// if the lines cross each other to begin with
|
|
if ( t == 0.0f ) {
|
|
*fraction = 0.0f;
|
|
return true;
|
|
}
|
|
// fraction of movement at the time the lines cross each other
|
|
*fraction = t / d;
|
|
return true;
|
|
}
|
|
|
|
/*
|
|
================
|
|
CM_AddContact
|
|
================
|
|
*/
|
|
ID_INLINE void CM_AddContact( cm_traceWork_t *tw ) {
|
|
|
|
if ( tw->numContacts >= tw->maxContacts ) {
|
|
return;
|
|
}
|
|
// copy contact information from trace_t
|
|
tw->contacts[tw->numContacts] = tw->trace.c;
|
|
tw->numContacts++;
|
|
// set fraction back to 1 to find all other contacts
|
|
tw->trace.fraction = 1.0f;
|
|
}
|
|
|
|
/*
|
|
================
|
|
CM_SetVertexSidedness
|
|
|
|
stores for the given model vertex at which side of one of the trm edges it passes
|
|
================
|
|
*/
|
|
ID_INLINE void CM_SetVertexSidedness( cm_vertex_t *v, const idPluecker &vpl, const idPluecker &epl, const int bitNum ) {
|
|
if ( !(v->sideSet & (1<<bitNum)) ) {
|
|
float fl;
|
|
fl = vpl.PermutedInnerProduct( epl );
|
|
v->side = (v->side & ~(1<<bitNum)) | (FLOATSIGNBITSET(fl) << bitNum);
|
|
v->sideSet |= (1 << bitNum);
|
|
}
|
|
}
|
|
|
|
/*
|
|
================
|
|
CM_SetEdgeSidedness
|
|
|
|
stores for the given model edge at which side one of the trm vertices
|
|
================
|
|
*/
|
|
ID_INLINE void CM_SetEdgeSidedness( cm_edge_t *edge, const idPluecker &vpl, const idPluecker &epl, const int bitNum ) {
|
|
if ( !(edge->sideSet & (1<<bitNum)) ) {
|
|
float fl;
|
|
fl = vpl.PermutedInnerProduct( epl );
|
|
edge->side = (edge->side & ~(1<<bitNum)) | (FLOATSIGNBITSET(fl) << bitNum);
|
|
edge->sideSet |= (1 << bitNum);
|
|
}
|
|
}
|
|
|
|
/*
|
|
================
|
|
idCollisionModelManagerLocal::TranslateTrmEdgeThroughPolygon
|
|
================
|
|
*/
|
|
void idCollisionModelManagerLocal::TranslateTrmEdgeThroughPolygon( cm_traceWork_t *tw, cm_polygon_t *poly, cm_trmEdge_t *trmEdge ) {
|
|
int i, edgeNum;
|
|
float f1, f2, dist, d1, d2;
|
|
idVec3 start, end, normal;
|
|
cm_edge_t *edge;
|
|
cm_vertex_t *v1, *v2;
|
|
idPluecker *pl, epsPl;
|
|
|
|
// check edges for a collision
|
|
for ( i = 0; i < poly->numEdges; i++) {
|
|
edgeNum = poly->edges[i];
|
|
edge = tw->model->edges + abs(edgeNum);
|
|
// if this edge is already checked
|
|
if ( edge->checkcount == idCollisionModelManagerLocal::checkCount ) {
|
|
continue;
|
|
}
|
|
// can never collide with internal edges
|
|
if ( edge->internal ) {
|
|
continue;
|
|
}
|
|
pl = &tw->polygonEdgePlueckerCache[i];
|
|
// get the sides at which the trm edge vertices pass the polygon edge
|
|
CM_SetEdgeSidedness( edge, *pl, tw->vertices[trmEdge->vertexNum[0]].pl, trmEdge->vertexNum[0] );
|
|
CM_SetEdgeSidedness( edge, *pl, tw->vertices[trmEdge->vertexNum[1]].pl, trmEdge->vertexNum[1] );
|
|
// if the trm edge start and end vertex do not pass the polygon edge at different sides
|
|
if ( !(((edge->side >> trmEdge->vertexNum[0]) ^ (edge->side >> trmEdge->vertexNum[1])) & 1) ) {
|
|
continue;
|
|
}
|
|
// get the sides at which the polygon edge vertices pass the trm edge
|
|
v1 = tw->model->vertices + edge->vertexNum[INTSIGNBITSET(edgeNum)];
|
|
CM_SetVertexSidedness( v1, tw->polygonVertexPlueckerCache[i], trmEdge->pl, trmEdge->bitNum );
|
|
v2 = tw->model->vertices + edge->vertexNum[INTSIGNBITNOTSET(edgeNum)];
|
|
CM_SetVertexSidedness( v2, tw->polygonVertexPlueckerCache[i+1], trmEdge->pl, trmEdge->bitNum );
|
|
// if the polygon edge start and end vertex do not pass the trm edge at different sides
|
|
if ( !((v1->side ^ v2->side) & (1<<trmEdge->bitNum)) ) {
|
|
continue;
|
|
}
|
|
// if there is no possible collision between the trm edge and the polygon edge
|
|
if ( !idCollisionModelManagerLocal::TranslateEdgeThroughEdge( trmEdge->cross, trmEdge->pl, *pl, &f1 ) ) {
|
|
continue;
|
|
}
|
|
// if moving away from edge
|
|
if ( f1 < 0.0f ) {
|
|
continue;
|
|
}
|
|
|
|
// pluecker coordinate for epsilon expanded edge
|
|
epsPl.FromLine( tw->model->vertices[edge->vertexNum[0]].p + edge->normal * CM_CLIP_EPSILON,
|
|
tw->model->vertices[edge->vertexNum[1]].p + edge->normal * CM_CLIP_EPSILON );
|
|
// calculate collision fraction with epsilon expanded edge
|
|
if ( !idCollisionModelManagerLocal::TranslateEdgeThroughEdge( trmEdge->cross, trmEdge->pl, epsPl, &f2 ) ) {
|
|
continue;
|
|
}
|
|
// if no collision with epsilon edge or moving away from edge
|
|
if ( f2 > 1.0f || f1 < f2 ) {
|
|
continue;
|
|
}
|
|
|
|
if ( f2 < 0.0f ) {
|
|
f2 = 0.0f;
|
|
}
|
|
|
|
if ( f2 < tw->trace.fraction ) {
|
|
tw->trace.fraction = f2;
|
|
// create plane with normal vector orthogonal to both the polygon edge and the trm edge
|
|
start = tw->model->vertices[edge->vertexNum[0]].p;
|
|
end = tw->model->vertices[edge->vertexNum[1]].p;
|
|
tw->trace.c.normal = ( end - start ).Cross( trmEdge->end - trmEdge->start );
|
|
// FIXME: do this normalize when we know the first collision
|
|
tw->trace.c.normal.Normalize();
|
|
tw->trace.c.dist = tw->trace.c.normal * start;
|
|
// make sure the collision plane faces the trace model
|
|
if ( tw->trace.c.normal * trmEdge->start - tw->trace.c.dist < 0.0f ) {
|
|
tw->trace.c.normal = -tw->trace.c.normal;
|
|
tw->trace.c.dist = -tw->trace.c.dist;
|
|
}
|
|
tw->trace.c.contents = poly->contents;
|
|
tw->trace.c.material = poly->material;
|
|
tw->trace.c.type = CONTACT_EDGE;
|
|
tw->trace.c.modelFeature = edgeNum;
|
|
tw->trace.c.trmFeature = trmEdge - tw->edges;
|
|
// calculate collision point
|
|
normal[0] = trmEdge->cross[2];
|
|
normal[1] = -trmEdge->cross[1];
|
|
normal[2] = trmEdge->cross[0];
|
|
dist = normal * trmEdge->start;
|
|
d1 = normal * start - dist;
|
|
d2 = normal * end - dist;
|
|
f1 = d1 / ( d1 - d2 );
|
|
//assert( f1 >= 0.0f && f1 <= 1.0f );
|
|
tw->trace.c.point = start + f1 * ( end - start );
|
|
// if retrieving contacts
|
|
if ( tw->getContacts ) {
|
|
CM_AddContact( tw );
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
================
|
|
CM_TranslationPlaneFraction
|
|
================
|
|
*/
|
|
|
|
#if 0
|
|
|
|
float CM_TranslationPlaneFraction( idPlane &plane, idVec3 &start, idVec3 &end ) {
|
|
float d1, d2;
|
|
|
|
d2 = plane.Distance( end );
|
|
// if the end point is closer to the plane than an epsilon we still take it for a collision
|
|
if ( d2 >= CM_CLIP_EPSILON ) {
|
|
return 1.0f;
|
|
}
|
|
d1 = plane.Distance( start );
|
|
|
|
// if completely behind the polygon
|
|
if ( d1 <= 0.0f ) {
|
|
return 1.0f;
|
|
}
|
|
// leaves polygon
|
|
if ( d1 <= d2 ) {
|
|
return 1.0f;
|
|
}
|
|
return (d1-CM_CLIP_EPSILON) / (d1-d2);
|
|
}
|
|
|
|
#else
|
|
|
|
float CM_TranslationPlaneFraction( idPlane &plane, idVec3 &start, idVec3 &end ) {
|
|
float d1, d2, d2eps;
|
|
|
|
d2 = plane.Distance( end );
|
|
// if the end point is closer to the plane than an epsilon we still take it for a collision
|
|
// if ( d2 >= CM_CLIP_EPSILON ) {
|
|
d2eps = d2 - CM_CLIP_EPSILON;
|
|
if ( FLOATSIGNBITNOTSET(d2eps) ) {
|
|
return 1.0f;
|
|
}
|
|
d1 = plane.Distance( start );
|
|
|
|
// if completely behind the polygon
|
|
if ( FLOATSIGNBITSET(d1) ) {
|
|
return 1.0f;
|
|
}
|
|
// if going towards the front of the plane and
|
|
// the start and end point are not at equal distance from the plane
|
|
// if ( d1 > d2 )
|
|
d2 = d1 - d2;
|
|
if ( d2 <= 0.0f ) {
|
|
return 1.0f;
|
|
}
|
|
return (d1-CM_CLIP_EPSILON) / d2;
|
|
}
|
|
|
|
#endif
|
|
|
|
/*
|
|
================
|
|
idCollisionModelManagerLocal::TranslateTrmVertexThroughPolygon
|
|
================
|
|
*/
|
|
void idCollisionModelManagerLocal::TranslateTrmVertexThroughPolygon( cm_traceWork_t *tw, cm_polygon_t *poly, cm_trmVertex_t *v, int bitNum ) {
|
|
int i, edgeNum;
|
|
float f;
|
|
cm_edge_t *edge;
|
|
|
|
f = CM_TranslationPlaneFraction( poly->plane, v->p, v->endp );
|
|
if ( f < tw->trace.fraction ) {
|
|
|
|
for ( i = 0; i < poly->numEdges; i++ ) {
|
|
edgeNum = poly->edges[i];
|
|
edge = tw->model->edges + abs(edgeNum);
|
|
CM_SetEdgeSidedness( edge, tw->polygonEdgePlueckerCache[i], v->pl, bitNum );
|
|
if ( INTSIGNBITSET(edgeNum) ^ ((edge->side >> bitNum) & 1) ) {
|
|
return;
|
|
}
|
|
}
|
|
if ( f < 0.0f ) {
|
|
f = 0.0f;
|
|
}
|
|
tw->trace.fraction = f;
|
|
// collision plane is the polygon plane
|
|
tw->trace.c.normal = poly->plane.Normal();
|
|
tw->trace.c.dist = poly->plane.Dist();
|
|
tw->trace.c.contents = poly->contents;
|
|
tw->trace.c.material = poly->material;
|
|
tw->trace.c.type = CONTACT_TRMVERTEX;
|
|
tw->trace.c.modelFeature = *reinterpret_cast<int *>(&poly);
|
|
tw->trace.c.trmFeature = v - tw->vertices;
|
|
tw->trace.c.point = v->p + tw->trace.fraction * ( v->endp - v->p );
|
|
// if retrieving contacts
|
|
if ( tw->getContacts ) {
|
|
CM_AddContact( tw );
|
|
// no need to store the trm vertex more than once as a contact
|
|
v->used = false;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
================
|
|
idCollisionModelManagerLocal::TranslatePointThroughPolygon
|
|
================
|
|
*/
|
|
void idCollisionModelManagerLocal::TranslatePointThroughPolygon( cm_traceWork_t *tw, cm_polygon_t *poly, cm_trmVertex_t *v ) {
|
|
int i, edgeNum;
|
|
float f;
|
|
cm_edge_t *edge;
|
|
idPluecker pl;
|
|
|
|
f = CM_TranslationPlaneFraction( poly->plane, v->p, v->endp );
|
|
if ( f < tw->trace.fraction ) {
|
|
|
|
for ( i = 0; i < poly->numEdges; i++ ) {
|
|
edgeNum = poly->edges[i];
|
|
edge = tw->model->edges + abs(edgeNum);
|
|
// if we didn't yet calculate the sidedness for this edge
|
|
if ( edge->checkcount != idCollisionModelManagerLocal::checkCount ) {
|
|
float fl;
|
|
edge->checkcount = idCollisionModelManagerLocal::checkCount;
|
|
pl.FromLine(tw->model->vertices[edge->vertexNum[0]].p, tw->model->vertices[edge->vertexNum[1]].p);
|
|
fl = v->pl.PermutedInnerProduct( pl );
|
|
edge->side = FLOATSIGNBITSET(fl);
|
|
}
|
|
// if the point passes the edge at the wrong side
|
|
//if ( (edgeNum > 0) == edge->side ) {
|
|
if ( INTSIGNBITSET(edgeNum) ^ edge->side ) {
|
|
return;
|
|
}
|
|
}
|
|
if ( f < 0.0f ) {
|
|
f = 0.0f;
|
|
}
|
|
tw->trace.fraction = f;
|
|
// collision plane is the polygon plane
|
|
tw->trace.c.normal = poly->plane.Normal();
|
|
tw->trace.c.dist = poly->plane.Dist();
|
|
tw->trace.c.contents = poly->contents;
|
|
tw->trace.c.material = poly->material;
|
|
tw->trace.c.type = CONTACT_TRMVERTEX;
|
|
tw->trace.c.modelFeature = *reinterpret_cast<int *>(&poly);
|
|
tw->trace.c.trmFeature = v - tw->vertices;
|
|
tw->trace.c.point = v->p + tw->trace.fraction * ( v->endp - v->p );
|
|
// if retrieving contacts
|
|
if ( tw->getContacts ) {
|
|
CM_AddContact( tw );
|
|
// no need to store the trm vertex more than once as a contact
|
|
v->used = false;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
================
|
|
idCollisionModelManagerLocal::TranslateVertexThroughTrmPolygon
|
|
================
|
|
*/
|
|
void idCollisionModelManagerLocal::TranslateVertexThroughTrmPolygon( cm_traceWork_t *tw, cm_trmPolygon_t *trmpoly, cm_polygon_t *poly, cm_vertex_t *v, idVec3 &endp, idPluecker &pl ) {
|
|
int i, edgeNum;
|
|
float f;
|
|
cm_trmEdge_t *edge;
|
|
|
|
f = CM_TranslationPlaneFraction( trmpoly->plane, v->p, endp );
|
|
if ( f < tw->trace.fraction ) {
|
|
|
|
for ( i = 0; i < trmpoly->numEdges; i++ ) {
|
|
edgeNum = trmpoly->edges[i];
|
|
edge = tw->edges + abs(edgeNum);
|
|
|
|
CM_SetVertexSidedness( v, pl, edge->pl, edge->bitNum );
|
|
if ( INTSIGNBITSET(edgeNum) ^ ((v->side >> edge->bitNum) & 1) ) {
|
|
return;
|
|
}
|
|
}
|
|
if ( f < 0.0f ) {
|
|
f = 0.0f;
|
|
}
|
|
tw->trace.fraction = f;
|
|
// collision plane is the inverse trm polygon plane
|
|
tw->trace.c.normal = -trmpoly->plane.Normal();
|
|
tw->trace.c.dist = -trmpoly->plane.Dist();
|
|
tw->trace.c.contents = poly->contents;
|
|
tw->trace.c.material = poly->material;
|
|
tw->trace.c.type = CONTACT_MODELVERTEX;
|
|
tw->trace.c.modelFeature = v - tw->model->vertices;
|
|
tw->trace.c.trmFeature = trmpoly - tw->polys;
|
|
tw->trace.c.point = v->p + tw->trace.fraction * ( endp - v->p );
|
|
// if retrieving contacts
|
|
if ( tw->getContacts ) {
|
|
CM_AddContact( tw );
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
================
|
|
idCollisionModelManagerLocal::TranslateTrmThroughPolygon
|
|
|
|
returns true if the polygon blocks the complete translation
|
|
================
|
|
*/
|
|
bool idCollisionModelManagerLocal::TranslateTrmThroughPolygon( cm_traceWork_t *tw, cm_polygon_t *p ) {
|
|
int i, j, k, edgeNum;
|
|
float fraction, d;
|
|
idVec3 endp;
|
|
idPluecker *pl;
|
|
cm_trmVertex_t *bv;
|
|
cm_trmEdge_t *be;
|
|
cm_trmPolygon_t *bp;
|
|
cm_vertex_t *v;
|
|
cm_edge_t *e;
|
|
|
|
// if already checked this polygon
|
|
if ( p->checkcount == idCollisionModelManagerLocal::checkCount ) {
|
|
return false;
|
|
}
|
|
p->checkcount = idCollisionModelManagerLocal::checkCount;
|
|
|
|
// if this polygon does not have the right contents behind it
|
|
if ( !(p->contents & tw->contents) ) {
|
|
return false;
|
|
}
|
|
|
|
// if the the trace bounds do not intersect the polygon bounds
|
|
if ( !tw->bounds.IntersectsBounds( p->bounds ) ) {
|
|
return false;
|
|
}
|
|
|
|
// only collide with the polygon if approaching at the front
|
|
if ( ( p->plane.Normal() * tw->dir ) > 0.0f ) {
|
|
return false;
|
|
}
|
|
|
|
// if the polygon is too far from the first heart plane
|
|
d = p->bounds.PlaneDistance( tw->heartPlane1 );
|
|
if ( idMath::Fabs(d) > tw->maxDistFromHeartPlane1 ) {
|
|
return false;
|
|
}
|
|
|
|
// if the polygon is too far from the second heart plane
|
|
d = p->bounds.PlaneDistance( tw->heartPlane2 );
|
|
if ( idMath::Fabs(d) > tw->maxDistFromHeartPlane2 ) {
|
|
return false;
|
|
}
|
|
fraction = tw->trace.fraction;
|
|
|
|
// fast point trace
|
|
if ( tw->pointTrace ) {
|
|
idCollisionModelManagerLocal::TranslatePointThroughPolygon( tw, p, &tw->vertices[0] );
|
|
}
|
|
else {
|
|
|
|
// trace bounds should cross polygon plane
|
|
switch ( tw->bounds.PlaneSide( p->plane ) ) {
|
|
case PLANESIDE_CROSS:
|
|
break;
|
|
case PLANESIDE_FRONT:
|
|
if ( tw->model->isConvex ) {
|
|
tw->quickExit = true;
|
|
return true;
|
|
}
|
|
default:
|
|
return false;
|
|
}
|
|
|
|
// calculate pluecker coordinates for the polygon edges and polygon vertices
|
|
for ( i = 0; i < p->numEdges; i++ ) {
|
|
edgeNum = p->edges[i];
|
|
e = tw->model->edges + abs(edgeNum);
|
|
// reset sidedness cache if this is the first time we encounter this edge during this trace
|
|
if ( e->checkcount != idCollisionModelManagerLocal::checkCount ) {
|
|
e->sideSet = 0;
|
|
}
|
|
// pluecker coordinate for edge
|
|
tw->polygonEdgePlueckerCache[i].FromLine( tw->model->vertices[e->vertexNum[0]].p,
|
|
tw->model->vertices[e->vertexNum[1]].p );
|
|
|
|
v = &tw->model->vertices[e->vertexNum[INTSIGNBITSET(edgeNum)]];
|
|
// reset sidedness cache if this is the first time we encounter this vertex during this trace
|
|
if ( v->checkcount != idCollisionModelManagerLocal::checkCount ) {
|
|
v->sideSet = 0;
|
|
}
|
|
// pluecker coordinate for vertex movement vector
|
|
tw->polygonVertexPlueckerCache[i].FromRay( v->p, -tw->dir );
|
|
}
|
|
// copy first to last so we can easily cycle through for the edges
|
|
tw->polygonVertexPlueckerCache[p->numEdges] = tw->polygonVertexPlueckerCache[0];
|
|
|
|
// trace trm vertices through polygon
|
|
for ( i = 0; i < tw->numVerts; i++ ) {
|
|
bv = tw->vertices + i;
|
|
if ( bv->used ) {
|
|
idCollisionModelManagerLocal::TranslateTrmVertexThroughPolygon( tw, p, bv, i );
|
|
}
|
|
}
|
|
|
|
// trace trm edges through polygon
|
|
for ( i = 1; i <= tw->numEdges; i++ ) {
|
|
be = tw->edges + i;
|
|
if ( be->used ) {
|
|
idCollisionModelManagerLocal::TranslateTrmEdgeThroughPolygon( tw, p, be);
|
|
}
|
|
}
|
|
|
|
// trace all polygon vertices through the trm
|
|
for ( i = 0; i < p->numEdges; i++ ) {
|
|
edgeNum = p->edges[i];
|
|
e = tw->model->edges + abs(edgeNum);
|
|
|
|
if ( e->checkcount == idCollisionModelManagerLocal::checkCount ) {
|
|
continue;
|
|
}
|
|
// set edge check count
|
|
e->checkcount = idCollisionModelManagerLocal::checkCount;
|
|
// can never collide with internal edges
|
|
if ( e->internal ) {
|
|
continue;
|
|
}
|
|
// got to check both vertices because we skip internal edges
|
|
for ( k = 0; k < 2; k++ ) {
|
|
|
|
v = tw->model->vertices + e->vertexNum[k ^ INTSIGNBITSET(edgeNum)];
|
|
// if this vertex is already checked
|
|
if ( v->checkcount == idCollisionModelManagerLocal::checkCount ) {
|
|
continue;
|
|
}
|
|
// set vertex check count
|
|
v->checkcount = idCollisionModelManagerLocal::checkCount;
|
|
|
|
// if the vertex is outside the trace bounds
|
|
if ( !tw->bounds.ContainsPoint( v->p ) ) {
|
|
continue;
|
|
}
|
|
|
|
// vertex end point after movement
|
|
endp = v->p - tw->dir;
|
|
// pluecker coordinate for vertex movement vector
|
|
pl = &tw->polygonVertexPlueckerCache[i+k];
|
|
|
|
for ( j = 0; j < tw->numPolys; j++ ) {
|
|
bp = tw->polys + j;
|
|
if ( bp->used ) {
|
|
idCollisionModelManagerLocal::TranslateVertexThroughTrmPolygon( tw, bp, p, v, endp, *pl );
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
// if there was a collision with this polygon and we are not retrieving contacts
|
|
if ( tw->trace.fraction < fraction && !tw->getContacts ) {
|
|
fraction = tw->trace.fraction;
|
|
endp = tw->start + fraction * tw->dir;
|
|
// decrease bounds
|
|
for ( i = 0; i < 3; i++ ) {
|
|
if ( tw->start[i] < endp[i] ) {
|
|
tw->bounds[0][i] = tw->start[i] + tw->size[0][i] - CM_BOX_EPSILON;
|
|
tw->bounds[1][i] = endp[i] + tw->size[1][i] + CM_BOX_EPSILON;
|
|
}
|
|
else {
|
|
tw->bounds[0][i] = endp[i] + tw->size[0][i] - CM_BOX_EPSILON;
|
|
tw->bounds[1][i] = tw->start[i] + tw->size[1][i] + CM_BOX_EPSILON;
|
|
}
|
|
}
|
|
}
|
|
|
|
return ( tw->trace.fraction == 0.0f );
|
|
}
|
|
|
|
/*
|
|
================
|
|
idCollisionModelManagerLocal::SetupTrm
|
|
================
|
|
*/
|
|
void idCollisionModelManagerLocal::SetupTrm( cm_traceWork_t *tw, const idTraceModel *trm ) {
|
|
int i, j;
|
|
|
|
// vertices
|
|
tw->numVerts = trm->numVerts;
|
|
for ( i = 0; i < trm->numVerts; i++ ) {
|
|
tw->vertices[i].p = trm->verts[i];
|
|
tw->vertices[i].used = false;
|
|
}
|
|
// edges
|
|
tw->numEdges = trm->numEdges;
|
|
for ( i = 1; i <= trm->numEdges; i++ ) {
|
|
tw->edges[i].vertexNum[0] = trm->edges[i].v[0];
|
|
tw->edges[i].vertexNum[1] = trm->edges[i].v[1];
|
|
tw->edges[i].used = false;
|
|
}
|
|
// polygons
|
|
tw->numPolys = trm->numPolys;
|
|
for ( i = 0; i < trm->numPolys; i++ ) {
|
|
tw->polys[i].numEdges = trm->polys[i].numEdges;
|
|
for ( j = 0; j < trm->polys[i].numEdges; j++ ) {
|
|
tw->polys[i].edges[j] = trm->polys[i].edges[j];
|
|
}
|
|
tw->polys[i].plane.SetNormal( trm->polys[i].normal );
|
|
tw->polys[i].used = false;
|
|
}
|
|
// is the trace model convex or not
|
|
tw->isConvex = trm->isConvex;
|
|
}
|
|
|
|
/*
|
|
================
|
|
idCollisionModelManagerLocal::SetupTranslationHeartPlanes
|
|
================
|
|
*/
|
|
void idCollisionModelManagerLocal::SetupTranslationHeartPlanes( cm_traceWork_t *tw ) {
|
|
idVec3 dir, normal1, normal2;
|
|
|
|
// calculate trace heart planes
|
|
dir = tw->dir;
|
|
dir.Normalize();
|
|
dir.NormalVectors( normal1, normal2 );
|
|
tw->heartPlane1.SetNormal( normal1 );
|
|
tw->heartPlane1.FitThroughPoint( tw->start );
|
|
tw->heartPlane2.SetNormal( normal2 );
|
|
tw->heartPlane2.FitThroughPoint( tw->start );
|
|
}
|
|
|
|
/*
|
|
================
|
|
idCollisionModelManagerLocal::Translation
|
|
================
|
|
*/
|
|
void idCollisionModelManagerLocal::Translation( trace_t *results, const idVec3 &start, const idVec3 &end,
|
|
const idTraceModel *trm, const idMat3 &trmAxis, int contentMask,
|
|
cmHandle_t model, const idVec3 &modelOrigin, const idMat3 &modelAxis ) {
|
|
|
|
int i, j;
|
|
float dist;
|
|
bool model_rotated, trm_rotated;
|
|
idVec3 dir1, dir2, dir;
|
|
idMat3 invModelAxis, tmpAxis;
|
|
cm_trmPolygon_t *poly;
|
|
cm_trmEdge_t *edge;
|
|
cm_trmVertex_t *vert;
|
|
ALIGN16( static cm_traceWork_t tw );
|
|
|
|
assert( ((byte *)&start) < ((byte *)results) || ((byte *)&start) >= (((byte *)results) + sizeof( trace_t )) );
|
|
assert( ((byte *)&end) < ((byte *)results) || ((byte *)&end) >= (((byte *)results) + sizeof( trace_t )) );
|
|
assert( ((byte *)&trmAxis) < ((byte *)results) || ((byte *)&trmAxis) >= (((byte *)results) + sizeof( trace_t )) );
|
|
|
|
memset( results, 0, sizeof( *results ) );
|
|
|
|
if ( model < 0 || model > MAX_SUBMODELS || model > idCollisionModelManagerLocal::maxModels ) {
|
|
common->Printf("idCollisionModelManagerLocal::Translation: invalid model handle\n");
|
|
return;
|
|
}
|
|
if ( !idCollisionModelManagerLocal::models[model] ) {
|
|
common->Printf("idCollisionModelManagerLocal::Translation: invalid model\n");
|
|
return;
|
|
}
|
|
|
|
// if case special position test
|
|
if ( start[0] == end[0] && start[1] == end[1] && start[2] == end[2] ) {
|
|
idCollisionModelManagerLocal::ContentsTrm( results, start, trm, trmAxis, contentMask, model, modelOrigin, modelAxis );
|
|
return;
|
|
}
|
|
|
|
idCollisionModelManagerLocal::checkCount++;
|
|
|
|
tw.trace.fraction = 1.0f;
|
|
tw.trace.c.contents = 0;
|
|
tw.trace.c.type = CONTACT_NONE;
|
|
tw.contents = contentMask;
|
|
tw.isConvex = true;
|
|
tw.rotation = false;
|
|
tw.positionTest = false;
|
|
tw.quickExit = false;
|
|
tw.getContacts = idCollisionModelManagerLocal::getContacts;
|
|
tw.contacts = idCollisionModelManagerLocal::contacts;
|
|
tw.maxContacts = idCollisionModelManagerLocal::maxContacts;
|
|
tw.numContacts = 0;
|
|
tw.model = idCollisionModelManagerLocal::models[model];
|
|
tw.start = start - modelOrigin;
|
|
tw.end = end - modelOrigin;
|
|
tw.dir = end - start;
|
|
|
|
model_rotated = modelAxis.IsRotated();
|
|
if ( model_rotated ) {
|
|
invModelAxis = modelAxis.Transpose();
|
|
}
|
|
|
|
// if optimized point trace
|
|
if ( !trm || ( trm->bounds[1][0] - trm->bounds[0][0] <= 0.0f &&
|
|
trm->bounds[1][1] - trm->bounds[0][1] <= 0.0f &&
|
|
trm->bounds[1][2] - trm->bounds[0][2] <= 0.0f ) ) {
|
|
|
|
if ( model_rotated ) {
|
|
// rotate trace instead of model
|
|
tw.start *= invModelAxis;
|
|
tw.end *= invModelAxis;
|
|
tw.dir *= invModelAxis;
|
|
}
|
|
|
|
// trace bounds
|
|
for ( i = 0; i < 3; i++ ) {
|
|
if ( tw.start[i] < tw.end[i] ) {
|
|
tw.bounds[0][i] = tw.start[i] - CM_BOX_EPSILON;
|
|
tw.bounds[1][i] = tw.end[i] + CM_BOX_EPSILON;
|
|
}
|
|
else {
|
|
tw.bounds[0][i] = tw.end[i] - CM_BOX_EPSILON;
|
|
tw.bounds[1][i] = tw.start[i] + CM_BOX_EPSILON;
|
|
}
|
|
}
|
|
tw.extents[0] = tw.extents[1] = tw.extents[2] = CM_BOX_EPSILON;
|
|
tw.size.Zero();
|
|
|
|
// setup trace heart planes
|
|
idCollisionModelManagerLocal::SetupTranslationHeartPlanes( &tw );
|
|
tw.maxDistFromHeartPlane1 = CM_BOX_EPSILON;
|
|
tw.maxDistFromHeartPlane2 = CM_BOX_EPSILON;
|
|
// collision with single point
|
|
tw.numVerts = 1;
|
|
tw.vertices[0].p = tw.start;
|
|
tw.vertices[0].endp = tw.vertices[0].p + tw.dir;
|
|
tw.vertices[0].pl.FromRay( tw.vertices[0].p, tw.dir );
|
|
tw.numEdges = tw.numPolys = 0;
|
|
tw.pointTrace = true;
|
|
// trace through the model
|
|
idCollisionModelManagerLocal::TraceThroughModel( &tw );
|
|
// store results
|
|
*results = tw.trace;
|
|
results->endpos = start + results->fraction * (end - start);
|
|
results->endAxis = mat3_identity;
|
|
|
|
if ( results->fraction < 1.0f ) {
|
|
// rotate trace plane normal if there was a collision with a rotated model
|
|
if ( model_rotated ) {
|
|
results->c.normal *= modelAxis;
|
|
results->c.point *= modelAxis;
|
|
}
|
|
results->c.point += modelOrigin;
|
|
results->c.dist += modelOrigin * results->c.normal;
|
|
}
|
|
idCollisionModelManagerLocal::numContacts = tw.numContacts;
|
|
return;
|
|
}
|
|
|
|
// the trace fraction is too inaccurate to describe translations over huge distances
|
|
if ( tw.dir.LengthSqr() > Square( CM_MAX_TRACE_DIST ) ) {
|
|
results->fraction = 0.0f;
|
|
results->endpos = start;
|
|
results->endAxis = trmAxis;
|
|
results->c.normal = vec3_origin;
|
|
results->c.material = NULL;
|
|
results->c.point = start;
|
|
if ( session->rw ) {
|
|
session->rw->DebugArrow( colorRed, start, end, 1 );
|
|
}
|
|
common->Printf( "idCollisionModelManagerLocal::Translation: huge translation from (%.2f %.2f %.2f) to (%.2f %.2f %.2f)\n",
|
|
start.x, start.y, start.z, end.x, end.y, end.z);
|
|
return;
|
|
}
|
|
|
|
tw.pointTrace = false;
|
|
tw.size.Clear();
|
|
|
|
// setup trm structure
|
|
idCollisionModelManagerLocal::SetupTrm( &tw, trm );
|
|
|
|
trm_rotated = trmAxis.IsRotated();
|
|
|
|
// calculate vertex positions
|
|
if ( trm_rotated ) {
|
|
for ( i = 0; i < tw.numVerts; i++ ) {
|
|
// rotate trm around the start position
|
|
tw.vertices[i].p *= trmAxis;
|
|
}
|
|
}
|
|
for ( i = 0; i < tw.numVerts; i++ ) {
|
|
// set trm at start position
|
|
tw.vertices[i].p += tw.start;
|
|
}
|
|
if ( model_rotated ) {
|
|
for ( i = 0; i < tw.numVerts; i++ ) {
|
|
// rotate trm around model instead of rotating the model
|
|
tw.vertices[i].p *= invModelAxis;
|
|
}
|
|
}
|
|
|
|
// add offset to start point
|
|
if ( trm_rotated ) {
|
|
dir = trm->offset * trmAxis;
|
|
tw.start += dir;
|
|
tw.end += dir;
|
|
} else {
|
|
tw.start += trm->offset;
|
|
tw.end += trm->offset;
|
|
}
|
|
if ( model_rotated ) {
|
|
// rotate trace instead of model
|
|
tw.start *= invModelAxis;
|
|
tw.end *= invModelAxis;
|
|
tw.dir *= invModelAxis;
|
|
}
|
|
|
|
// rotate trm polygon planes
|
|
if ( trm_rotated & model_rotated ) {
|
|
tmpAxis = trmAxis * invModelAxis;
|
|
for ( poly = tw.polys, i = 0; i < tw.numPolys; i++, poly++ ) {
|
|
poly->plane *= tmpAxis;
|
|
}
|
|
} else if ( trm_rotated ) {
|
|
for ( poly = tw.polys, i = 0; i < tw.numPolys; i++, poly++ ) {
|
|
poly->plane *= trmAxis;
|
|
}
|
|
} else if ( model_rotated ) {
|
|
for ( poly = tw.polys, i = 0; i < tw.numPolys; i++, poly++ ) {
|
|
poly->plane *= invModelAxis;
|
|
}
|
|
}
|
|
|
|
// setup trm polygons
|
|
for ( poly = tw.polys, i = 0; i < tw.numPolys; i++, poly++ ) {
|
|
// if the trm poly plane is facing in the movement direction
|
|
dist = poly->plane.Normal() * tw.dir;
|
|
if ( dist > 0.0f || ( !trm->isConvex && dist == 0.0f ) ) {
|
|
// this trm poly and it's edges and vertices need to be used for collision
|
|
poly->used = true;
|
|
for ( j = 0; j < poly->numEdges; j++ ) {
|
|
edge = &tw.edges[abs( poly->edges[j] )];
|
|
edge->used = true;
|
|
tw.vertices[edge->vertexNum[0]].used = true;
|
|
tw.vertices[edge->vertexNum[1]].used = true;
|
|
}
|
|
}
|
|
}
|
|
|
|
// setup trm vertices
|
|
for ( vert = tw.vertices, i = 0; i < tw.numVerts; i++, vert++ ) {
|
|
if ( !vert->used ) {
|
|
continue;
|
|
}
|
|
// get axial trm size after rotations
|
|
tw.size.AddPoint( vert->p - tw.start );
|
|
// calculate the end position of each vertex for a full trace
|
|
vert->endp = vert->p + tw.dir;
|
|
// pluecker coordinate for vertex movement line
|
|
vert->pl.FromRay( vert->p, tw.dir );
|
|
}
|
|
|
|
// setup trm edges
|
|
for ( edge = tw.edges + 1, i = 1; i <= tw.numEdges; i++, edge++ ) {
|
|
if ( !edge->used ) {
|
|
continue;
|
|
}
|
|
// edge start, end and pluecker coordinate
|
|
edge->start = tw.vertices[edge->vertexNum[0]].p;
|
|
edge->end = tw.vertices[edge->vertexNum[1]].p;
|
|
edge->pl.FromLine( edge->start, edge->end );
|
|
// calculate normal of plane through movement plane created by the edge
|
|
dir = edge->start - edge->end;
|
|
edge->cross[0] = dir[0] * tw.dir[1] - dir[1] * tw.dir[0];
|
|
edge->cross[1] = dir[0] * tw.dir[2] - dir[2] * tw.dir[0];
|
|
edge->cross[2] = dir[1] * tw.dir[2] - dir[2] * tw.dir[1];
|
|
// bit for vertex sidedness bit cache
|
|
edge->bitNum = i;
|
|
}
|
|
|
|
// set trm plane distances
|
|
for ( poly = tw.polys, i = 0; i < tw.numPolys; i++, poly++ ) {
|
|
if ( poly->used ) {
|
|
poly->plane.FitThroughPoint( tw.edges[abs(poly->edges[0])].start );
|
|
}
|
|
}
|
|
|
|
// bounds for full trace, a little bit larger for epsilons
|
|
for ( i = 0; i < 3; i++ ) {
|
|
if ( tw.start[i] < tw.end[i] ) {
|
|
tw.bounds[0][i] = tw.start[i] + tw.size[0][i] - CM_BOX_EPSILON;
|
|
tw.bounds[1][i] = tw.end[i] + tw.size[1][i] + CM_BOX_EPSILON;
|
|
} else {
|
|
tw.bounds[0][i] = tw.end[i] + tw.size[0][i] - CM_BOX_EPSILON;
|
|
tw.bounds[1][i] = tw.start[i] + tw.size[1][i] + CM_BOX_EPSILON;
|
|
}
|
|
if ( idMath::Fabs( tw.size[0][i] ) > idMath::Fabs( tw.size[1][i] ) ) {
|
|
tw.extents[i] = idMath::Fabs( tw.size[0][i] ) + CM_BOX_EPSILON;
|
|
} else {
|
|
tw.extents[i] = idMath::Fabs( tw.size[1][i] ) + CM_BOX_EPSILON;
|
|
}
|
|
}
|
|
|
|
// setup trace heart planes
|
|
idCollisionModelManagerLocal::SetupTranslationHeartPlanes( &tw );
|
|
tw.maxDistFromHeartPlane1 = 0;
|
|
tw.maxDistFromHeartPlane2 = 0;
|
|
// calculate maximum trm vertex distance from both heart planes
|
|
for ( vert = tw.vertices, i = 0; i < tw.numVerts; i++, vert++ ) {
|
|
if ( !vert->used ) {
|
|
continue;
|
|
}
|
|
dist = idMath::Fabs( tw.heartPlane1.Distance( vert->p ) );
|
|
if ( dist > tw.maxDistFromHeartPlane1 ) {
|
|
tw.maxDistFromHeartPlane1 = dist;
|
|
}
|
|
dist = idMath::Fabs( tw.heartPlane2.Distance( vert->p ) );
|
|
if ( dist > tw.maxDistFromHeartPlane2 ) {
|
|
tw.maxDistFromHeartPlane2 = dist;
|
|
}
|
|
}
|
|
// for epsilons
|
|
tw.maxDistFromHeartPlane1 += CM_BOX_EPSILON;
|
|
tw.maxDistFromHeartPlane2 += CM_BOX_EPSILON;
|
|
|
|
// trace through the model
|
|
idCollisionModelManagerLocal::TraceThroughModel( &tw );
|
|
|
|
// if we're getting contacts
|
|
if ( tw.getContacts ) {
|
|
// move all contacts to world space
|
|
if ( model_rotated ) {
|
|
for ( i = 0; i < tw.numContacts; i++ ) {
|
|
tw.contacts[i].normal *= modelAxis;
|
|
tw.contacts[i].point *= modelAxis;
|
|
}
|
|
}
|
|
if ( modelOrigin != vec3_origin ) {
|
|
for ( i = 0; i < tw.numContacts; i++ ) {
|
|
tw.contacts[i].point += modelOrigin;
|
|
tw.contacts[i].dist += modelOrigin * tw.contacts[i].normal;
|
|
}
|
|
}
|
|
idCollisionModelManagerLocal::numContacts = tw.numContacts;
|
|
} else {
|
|
// store results
|
|
*results = tw.trace;
|
|
results->endpos = start + results->fraction * ( end - start );
|
|
results->endAxis = trmAxis;
|
|
|
|
if ( results->fraction < 1.0f ) {
|
|
// if the fraction is tiny the actual movement could end up zero
|
|
if ( results->fraction > 0.0f && results->endpos.Compare( start ) ) {
|
|
results->fraction = 0.0f;
|
|
}
|
|
// rotate trace plane normal if there was a collision with a rotated model
|
|
if ( model_rotated ) {
|
|
results->c.normal *= modelAxis;
|
|
results->c.point *= modelAxis;
|
|
}
|
|
results->c.point += modelOrigin;
|
|
results->c.dist += modelOrigin * results->c.normal;
|
|
}
|
|
}
|
|
|
|
#ifdef _DEBUG
|
|
// test for collisions
|
|
if ( cm_debugCollision.GetBool() ) {
|
|
if (!idCollisionModelManagerLocal::getContacts ) {
|
|
// if the trm is stuck in the model
|
|
if ( idCollisionModelManagerLocal::Contents( results->endpos, trm, trmAxis, -1, model, modelOrigin, modelAxis ) & contentMask ) {
|
|
trace_t tr;
|
|
|
|
// test where the trm is stuck in the model
|
|
idCollisionModelManagerLocal::Contents( results->endpos, trm, trmAxis, -1, model, modelOrigin, modelAxis );
|
|
// re-run collision detection to find out where it failed
|
|
idCollisionModelManagerLocal::Translation( &tr, start, end, trm, trmAxis, contentMask, model, modelOrigin, modelAxis );
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
}
|