it could happen that UIs are added to the internal list twice,
and also that the last UI wasn't removed from the list when a new one
was focused fast enough.
That should work better now, I hope I didn't break anything..
- the gamepad button (or trigger) bound to attack (fire) now always
acts like the left mouse button in menus
- Display correct button name for "Back" button on Playstation-like
gamepads, even depending on whether it's PS3-like ("Select") or
PS4/5-like ("Share")
- Log some more information about detected gamepads
turns out SDL 2.0.12 added SDL_GameControllerGetType() which tells you
what kind of controller it is (xbox, playstation, nintendo, ..).
Using this to implement an auto-mode for joy_gamepadLayout, when it's
set to -1 (the new default).
This should still build with older versions of SDL2 (but won't have
that autodetection then).
The button names shown in the controls menu now depend on this CVar.
So if you set it to 1 (Nintendo), the "A" button (which, based on its
position, would be "B" on XBox/XInput gamepads) is actually shown as
"Pad A", and if it's set to 2 (Playstation), it's shown as "Pad Cross".
The "real" names, used in the config, remain the same and are based on
position: JOY_BTN_SOUTH, JOY_BTN_EAST, JOY_BTN_WEST, JOY_BTN_NORTH
- treat DPad as 4 regular buttons (was already the case mostly, but now
the code is simpler)
- rename in_invertLook to joy_invertLook and in_useJoystick to
in_useGamepad and remove unused CVars
- make controller Start button generate K_ESCAPE events, so it can
always be used to open/close the menu (similar to D3BFG)
- move mousecursor with sticks, A button (south) for left-click,
B button (east) for right-click (doesn't work in PDA yet)
- removed special handling of K_JOY_BTN_* in idWindow::HandleEvent()
by generating fake mouse button events for gamepad A/B
in idUserInterfaceLocal::HandleEvent()
- renamed gamepad/joystick actions and keys to have some meaning
for buttons (instead of just JOY1, JOY2 etc)
- compiles with SDL1.2 again (there gamepads aren't supported though)
- shorter names for gamepad keys/axis in the key bindings menu
There were lots of places in the code that called Sys_GrabInput(),
some of them each frame.
Most of this is unified in events.cpp now, in handleMouseGrab() which
is called once per frame by Sys_GenerateEvents() - this makes reasoning
about when the mouse is grabbed and when not a lot easier.
Sys_GrabInput(false) still is called in a few places, before operations
that tend to take long (like loading a map or vid_restart), but
(hopefully) not regularly anymore.
The other big change is that the game now uses SDLs absolute mouse mode
for fullscreen menus (except the PDA which is an ugly hack), so the
ingame cursor is at the same position as the system cursor, which
especially helps when debugging with `in_nograb 1` and should also help
if someone wants to integrate an additional GUI toolkit like Dear ImGui.
as long as it's chars Doom3 supports, i.e. it can be converted
to ISO-8859-1
also renamed kbdNames to _in_kbdNames to reduce likelyhood of clashes
(as it can't be static)
If in_ignoreConsoleKey is set, the console can only be opened with
Shift+Esc, not `/^/whatever, so you can easily type whatever character
is on your "console key" into the game, or even bind that key.
Otherwise, with SDL2, that key (KEY_SCANCODE_GRAVE) always generates the
newly added K_CONSOLE.
in_kbd has a new (SDL2-only) "auto" mode which tries to detect the
keyboard layout based on SDL_GetKeyFromScancode( SDL_SCANCODE_GRAVE ).
Wherever Sys_GetConsoleKey() is called, I now take the current state of
Shift into account, so we don't discard more chars than necessary, esp.
when they keyboard-layout (in_kbd) is *not* correctly set.
(TBH the only reason besides SDL1.2 to keep in_kbd around is to ignore
the char generated by the "console key" in the console..)
It's set to 0 by default (which is the original behavior), if set to 1,
SDL2 will grab the keyboard, so Alt-Tab or the Windows Key etc will not
be handled by the operating system but by dhewm3 (=> you can bind the
Windows key like any normal key and it won't open the start menu)
If a key is pressed whichs SDL_Keycode isn't known to Doom3 (has no
corresponding K_* constant), its SDL_Scancode is mapped to the
corresponding newly added K_SC_* scancode constant.
I think I have K_SC_* constants for all keys that differ between
keyboard layouts (which is mostly printable characters; F1-F12, Ctrl,
Shift, ... should be the same on all layouts, which means that e.g.
SDL_SCANCODE_F1 always belongs to SDLK_F1 which the old code already
maps to Doom3's K_F1).
What's extra nice (IMO) is that when Doom3 requests a *localized* name
of the key (like for showing in the bindings menu), we actually use the
name of the SDL_Keycode that *currently* belongs to the scancode, and
esp. the "Western High-ASCII characters" (ISO-8859-1) supported by Doom3
like Ä or Ñ are displayed correctly.
(I already implemented a very similar hack in Yamagi Quake II and
reused the list of scancodes)
This should fix most of the problems reported in #323
the game was frozen (the main menu and console worked though) when
switching from the Radiant to the engine (with F2 or that button).
Turned out common->ActivateTool( false ) must be called if the game window
has forcus, so idSessionLocal::Frame() doesn't return early (and thus not
run the game code).
Furthermore, there was no sound when switching from Radiant to the game,
because the SoundWorld was set to sth editor-specific. Fixed that as well.
as we do int buttonIndex = ev.button.button - SDL_BUTTON_LEFT;
it's only consistent to do if(ev.button.button < SDL_BUTTON_LEFT + 8)
it doesn't really make any difference as long as SDL_BUTTON_LEFT is 1,
but this way it's safe for SDL3 or whatever future version might break
the ABI.
The first row of AZERTY-Keyboards (used in France and Belgium) doesn't
have numbers as keys but ², &, é, ", ', (, -, è, _, ç, à, ), =
(with small differences between France and Belgium).
For some of those keys we don't have keycodes - and neither does SDL2.
See also https://bugzilla.libsdl.org/show_bug.cgi?id=3188
As a workaround, just map those keys to 1, 2, ..., 9, 0 anyway, as those
are keys Quake2 already knows (and those chars are printed on the keys
too, for typing they're reachable via shift).
This workaround only works for SDL2, as SDL1.2 doesn't have Scancodes
which we need to identify the keys.
This should obsolete one part of pull request #135
It's an SDL_TEXTEDITING event which we seem to get on Windows whenever
the Window gains focus (or is created). I think it can be safely
ignored, so that's what I do.
I also changed how those warnings are printed - as a hex number now,
because they're defined as hex numbers in the SDL source and it's easier
to find out what kind of event it is this way.
If res_none (event with .evType == EV_NONE) is returned,
idEventLoop::RunEventLoop() will assume there are no more events this
frame => pending events will be delayed til next frame (or later if
again res_none is returned in the meantime).
So res_none shouldn't be returned just because there was an SDL event
we didn't care about or we did care about but don't generate a doom3
event for (but toggle fullscreen or something).
Instead we should just fetch and handle the next SDL event.
There used to be a bug (discussed in #40), that ALT was still set after
using ALT-Tab. Thus when next pressing enter fullscreen was toggled.
This should now be fixed by unsetting the modifiers when focus is
regained (SDL_ACTIVEEVENT or SDL_WINDOWEVENT_FOCUS_GAINED).
New CVar "in_kbd" to set the layout for the keyboard. SDL 1.2
doesn't offer any way to determine it, and we need this feature
to use the same key for toggling the console independent of the
keyboard layout.
The old "in_nograb" from the Linux backend is still supported.
